In the mobile-based bank application that is modeled to detect fraud, there are two actors involved: The User and the Audit Commission. There are four use cases involved: User Registration, Transaction Observation, Transaction Suspension, and Transaction Inspection. Below is the Use Case Diagram of the Mobile-based bank application with all four use cases and two actors represented: Use Case Diagram with all four use cases and two actors represented:
User RegistrationUse Case:This use case involves the user registering with the mobile-based bank application. The user will provide all necessary information to register in the app.
Transaction Observation Use Case: This use case allows the app to observe all the customer transactions in order to detect fraud. If a transaction is made for $1000000 and the receiver takes transactions more than 5 times, the corresponding transaction is suspended and transferred to the audit commission for inspection.
Transaction Suspension Use Case: This use case is used to suspend a transaction after observing fraudulent activities in the transaction. The transaction is then transferred to the audit commission for inspection.
Transaction Inspection Use Case: This use case involves the audit commission inspecting the suspended transaction to decide whether it is fraudulent or not.
If the transaction is found to be fraudulent, the appropriate action is taken by the commission. If not, the transaction is submitted for completion.
let's learn more about fraud:
https://brainly.com/question/14293081
#SPJ11
Consider the causal, discrete-time LTI system described by the difference equation: 1 1 y[n] + y{n-1} − y(n − 2) = x(n-1) a) Determine the frequency response H(2) of the system. b) Determine the impulse response h[n]. c) Find the impulse response of the inverse system h¹ [n] that satisfies H() H¹() = 1. Is the inverse system causal? d) Determine the output y[n] when x[n] = (½)"−¹u[n − 1] +8[n].
The system.y[n] = x[n] * h[n]y[n] = -u[n-1] * h[n] = u[-(n-1)-1] * h[-(n-1)]y[n] = u[-n] * (-h[-n+1]) = (-1)^(n-1) * u[n-1]Therefore, the output of the system isy[n] = (-1)^(n-1) * u[n-1].
Frequency response H(2):In order to obtain the frequency response H(2) of the system, one must first substitute z = ejω into the transfer function H(z) to obtain the frequency response. By substitution into the difference equation, one obtains the transfer function as follows:Y(z) + Y(z)z^(-1) - Y(z)z^(-2) = X(z)z^(-1)H(z) = (1 - z^(-1) + z^(-2)) / z^(-1)H(z) = (z^2 - z + 1) / zH(z) = (1 - z^(-1) + z^(-2)) / z^(-1)
Therefore, the frequency response of the system isH(2) = (1 - 2^(-1) + 2^(-2)) / 2^(-1)H(2) = 2b. Impulse response h[n]:In order to find the impulse response h[n], one must take the inverse z-transform of H(z). Since the denominator is 1 - z^(-1) + z^(-2), which is a quadratic polynomial in z^(-1), one may use partial fraction expansion and write H(z) as follows:H(z) = (1 - z^(-1) + z^(-2)) / z^(-1)= (z - 1 + z^(-1)) / z= (z / (z - 1)) - ((1 - z^(-1)) / (z - 1)
To know more about output visit:-
https://brainly.com/question/14227929
#SPJ11
Answer ALL questions in this section. (a) Convert the hexadecimal number (FAFA.B) 16 into decimal number. (b) Solve the following subtraction in 2’s complement form and verify its decimal solution. 01100101 - 11101000 (c) Boolean expression is given as: A + B[AC + (B+C)D] (i) Simplify the expression into its simplest Sum-of-Product(SOP) form. (ii) Draw the logic diagram of the expression obtained in part (c)(i). (iii) Provide the Canonical Product-of-Sum(POS) form.
(iv) Draw the logic diagram of the expression obtained in part (c)(iii).
The hexadecimal number (FAFA.B) 16 into decimal number is 64250.6875 (decimal).
(a) To convert the hexadecimal number (FAFA.B)16 into a decimal number, we can break it down into its integer and fractional parts.
The integer part, FAFA16, can be converted to decimal by multiplying each digit by the corresponding power of 16 and summing them up:
FAFA16 = (15 × 16^3) + (10 × 16^2) + (15 × 16^1) + (10 × 16^0) = 64250
The fractional part, B16, represents the value 11/16 in decimal since B corresponds to the decimal value 11. Therefore, B16 = 11/16.
Combining the integer and fractional parts, we have:
FAFA.B16 = 64250 + 11/16 = 64250.6875 (decimal)
(b) To subtract the binary numbers 01100101 and 11101000 using 2's complement form, we first need to find the 2's complement of the second number (11101000).
Invert all the bits in 11101000 to get 00010111. Then add 1 to the result: 00010111 + 1 = 00011000.
Now, perform the subtraction by adding the first number (01100101) and the 2's complement of the second number (00011000):
01100101
+ 00011000 (2's complement of 11101000)
----------
01111101
The result is 01111101 in binary. To verify the decimal solution, convert it to decimal form:
01111101 = (0 × 2^7) + (1 × 2^6) + (1 × 2^5) + (1 × 2^4) + (1 × 2^3) + (1 × 2^2) + (0 × 2^1) + (1 × 2^0) = 125 (decimal)
Therefore, 01100101 - 11101000 = 125 in decimal.
(c) (i) To simplify the given boolean expression A + B[AC + (B + C)D] into its simplest Sum-of-Product (SOP) form, we can expand and simplify the expression:
A + B[AC + (B + C)D]
= A + B[AC + BD + CD]
= A + BAC + BBD + BCD
The simplified SOP form is: A + BAC + BBD + BCD.
(ii) To obtain the Canonical Product-of-Sum (POS) form, we'll first distribute the negation operation over the expression and apply De Morgan's laws:
A + BAC + BBD + BCD
= A + ABC + ABD + BCD
Next, we'll convert each term into its complement form:
A = A' + A
ABC = (A' + B' + C') + ABC
ABD = (A' + B' + D') + ABD
BCD = (B' + C' + D') + BCD
Finally, we'll combine these terms using the distributive property:
(A' + A) + (A' + B' + C') + ABC + (A' + B' + D') + ABD + (B' + C' + D') + BCD
This is the Canonical Product-of-Sum (POS) form of the given boolean expression.
For more such questions on hexadecimal,click on
https://brainly.com/question/30470049
#SPJ8
The Probable question may be:
(a) Convert the hexadecimal number (FAFA.B) 16 into decimal number.
(b) Solve the following subtraction in 2's complement form and verify its decimal solution.
01100101 - 11101000
(c) Boolean expression is given as: A + B[AC + (B+ C)D]
(i) Simplify the expression into its simplest Sum-of-Product(SOP) form.
(ii) Provide the Canonical Product-of-Sum(POS) form.
A designer is considering two possible designs of a feedback amplifier. The ultimate goal is A, = 10 V/V. One design employs an amplifier for which A 1000 V/V and the other uses A = 500 V/V. Find ß and the desensitivity factor in both cases. If the A = 1000 amplifier units have a gain uncertainty of ±10%, what is the gain uncertainty for the closed-loop amplifiers utilizing this amplifier type? If the same result is to be achieved with the A = 500 amplifier, what is the maximum allowable uncertainty in its gain?
The maximum allowable uncertainty in the gain for the A = 500 amplifier is -90 V/V.
To find the feedback factor (β) and the desensitivity factor in both cases, we can use the formula for closed-loop gain (Acl) in a feedback amplifier:
Acl = A / (1 + Aβ)
For the design with A = 1000 V/V:
Given A = 1000 V/V and Acl = 10 V/V
10 = 1000 / (1 + 1000β)
1 + 1000β = 100
1000β = 99
β = 99 / 1000
β = 0.099
The desensitivity factor (S) for this case can be calculated as:
S = 1 / (1 + Aβ)
S = 1 / (1 + 1000 * 0.099)
S = 1 / (1 + 99)
S = 1 / 100
S = 0.01
For the design with A = 500 V/V:
Given A = 500 V/V and Acl = 10 V/V
10 = 500 / (1 + 500β)
1 + 500β = 50
500β = 49
β = 49 / 500
β = 0.098
The desensitivity factor for this case can be calculated as:
S = 1 / (1 + Aβ)
S = 1 / (1 + 500 * 0.098)
S = 1 / (1 + 49)
S = 1 / 50
S = 0.02
Now, let's calculate the gain uncertainty for the closed-loop amplifiers using the A = 1000 amplifier:
The gain uncertainty for the A = 1000 amplifier is ±10% of 1000 V/V, which is ±100 V/V.
To achieve the same result with the A = 500 amplifier, we need to find the maximum allowable uncertainty in its gain:
We can set up the equation:
100 ± uncertainty = 500 / (1 + 500β)
uncertainty = 500 / (1 + 500β) - 100
Using the value of β calculated earlier (β = 0.098):
uncertainty = 500 / (1 + 500 * 0.098) - 100
uncertainty = 500 / (1 + 49) - 100
uncertainty = 500 / 50 - 100
uncertainty = 10 - 100
uncertainty = -90 V/V
Therefore, the maximum allowable uncertainty in the gain for the A = 500 amplifier is -90 V/V.
To know more about uncertainty visit-
brainly.com/question/32572778
#SPJ11
Write a relational algebra expression that results in the names for all the people that eat at a pizzeria that serves a pizza that costs between seven and ten dollars, inclusive. You may use any of the following operators, though not all are necessary: selection, projection, natural join, difference.
The relational algebra expression to display the names for all the people who eat at a pizzeria serving pizza that costs between seven and ten dollars, inclusive is as follows: πname(σprice ≥ 7 ∧ price ≤ 10(pizza) ⋈ order ⋈ customer)
The relational algebra expression to display the names for all the people who eat at a pizzeria serving pizza that costs between seven and ten dollars, inclusive is as follows: πname(σprice ≥ 7 ∧ price ≤ 10(pizza) ⋈ order ⋈ customer)
The above expression has a combination of three operators - projection (π), selection (σ), and natural join (⋈).The given relational algebra expression retrieves the name of customers who ordered a pizza that costs between $7 and $10, including those pizzas from the pizza table, orders, and customer tables that satisfy the condition "price ≥ 7 ∧ price ≤ 10" using the selection operation. To retrieve only the names from the result table, we use projection operation (πname). This operator eliminates all the columns except the "name" column, which is retrieved from the resulting table.
To know more about algebra visit:
https://brainly.com/question/13715639
#SPJ11
If for a proposed urban freeway, the design ESAL is 7.11 x10 and the CBR of the subgrade layer is 80, determine the depth of a full-depth HMAC layer (one HMAC layer on subgrade) using AASHTO method. Assume Exc=300,000 lb/in2, R-90%, and So-0.45
The required depth of the full-depth HMAC layer for the proposed urban freeway, according to the AASHTO method, is 5,688 inches.
To determine the depth of a full-depth HMAC (Hot Mix Asphalt Concrete) layer for a proposed urban freeway using the AASHTO method, we need to consider the design Equivalent Single Axle Load (ESAL) and the California Bearing Ratio (CBR) of the subgrade layer. Given that the design ESAL is 7.11 x 10^6 and the CBR of the subgrade layer is 80, we can calculate the required HMAC layer depth as follows:
Step 1: Calculate the structural number (SN):
SN = ESAL x CBR
Substituting the given values:
SN = 7.11 x 10^6 x 80
SN = 568.8 x 10^6
Step 2: Determine the required thickness of the HMAC layer using the AASHTO method.
Using the AASHTO design equation:
SN = (0.1 x A) + (0.2 x B) + (0.3 x C) + (0.4 x D)
Where:
A = Thickness of Asphalt Wearing Surface (in inches)
B = Thickness of Asphalt Base Course (in inches)
C = Thickness of Subbase Course (in inches)
D = Thickness of Subgrade (in inches)
Since we are considering a full-depth HMAC layer, we can assume that the thickness of the subbase course and subgrade is zero. Therefore, the equation simplifies to:
SN = (0.1 x A) + (0.2 x B)
Step 3: Substitute the values and solve for the required HMAC layer thickness.
568.8 x 10^6 = (0.1 x A) + (0.2 x 0)
568.8 x 10^6 = 0.1 x A
A = (568.8 x 10^6) / 0.1
A = 5,688 x 10^7 inches
Since the HMAC layer thickness is typically expressed in inches, we convert the result to inches:
A = 5,688 inches
Therefore, the required depth of the full-depth HMAC layer for the proposed urban freeway, according to the AASHTO method, is 5,688 inches.
(Note: The depth calculated here is a theoretical value based on the given information and the AASHTO method. Actual design considerations may require adjustments or additional factors to be taken into account.)
Learn more about depth here
https://brainly.com/question/30235174
#SPJ11
Perform the following sequence of operations in an initially empty splay tree and draw the tree after each set of operations. a. Insert keys 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, in this order. b. Search for keys 1,3,5,7,9, 11, 13, 15, 17, 19, in this order. c. Delete keys 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, in this order.
Splay tree is a dynamic data structure that can be updated and accessed easily with its key. It has a self-adjusting feature that allows easy and quick access to frequently used nodes.
Splay tree provides the functionality of both Binary Search Tree (BST) and Hash Table operations. Splay tree has amortized O(log n) time complexity. The following are the given sequence of operations and the corresponding visualization of the splay tree at each step of the operation.Perform the following sequence of operations in an initially empty splay tree and draw the tree after each set of operations.Insert keys 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, in this order.The splay tree is initialized to an empty tree, and the given keys are inserted into the splay tree one at a time in the given order. The root of the tree becomes the last node inserted. The following visualization depicts the result of this sequence of operations:Search for keys 1,3,5,7,9, 11, 13, 15, 17, 19, in this order.The splay tree's search operation is performed on each key, one at a time, in the order specified. If the key is found, it is brought to the root of the tree.
Otherwise, the last node accessed during the search becomes the root of the tree. The following visualization depicts the result of this sequence of operations: Delete keys 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, in this order.The given keys are deleted one at a time in the order specified from the splay tree. The last node accessed during each delete operation becomes the new root of the tree. The following visualization depicts the result of this sequence of operations: Splay trees are one of the best data structures for performing dynamic operations on a dataset. Splay trees provide fast search, insertion, and deletion, making them a suitable data structure for most applications.
To know more about Splay tree visit:
brainly.com/question/29960874
#SPJ11
Draw a diagram for a write-back Cache with 32KB Cache size , 8- way associativity, and 64B block size, FIFO.
Explain what each part does. How does the cache size affect the cache? What is associativity and how does this affect the cache? What is the block size and how does it affect the cache? Explain LRU vs FIFO. Explain in detail and draw a diagram if necessary.
The cache you describe has 32KB size, divided into 8 sets with 64B blocks, and uses FIFO policy. It has 64 sets (32KB / (8 ways * 64B)) and 512 blocks (32KB / 64B).
What is the Cache Size?Cache Size (32KB): The amount of data the cache can hold. Larger cache can store more data, reducing the need to access slower main memory.
Associativity (8-way): Each set holds 8 blocks. Higher associativity can reduce conflict misses but consumes more power and area.
Block Size (64B): The unit of data exchanged between cache and main memory. Larger blocks exploit spatial locality but may fetch unneeded data.
LRU vs FIFO: LRU replaces least recently used blocks, and FIFO replaces the oldest, irrespective of usage. LRU performs better but is more complex.
Read more about cache blocks here:
https://brainly.com/question/29064802
#SPJ4
import java.io.*;
import java.util.Scanner;
public class KylesKayaks { final static Scanner read = new Scanner(System.in);
public static void main(String[] args) throws IOException {
// create a file object for the file "KylesKayaks.txt"
// create a Scanner object to read from the file KylesKayaks.txt
// create an array of 30 kayak objects, name it kayaks
int i=0, option=0;
boolean done=false;
String fname, lname;
//use a while loop to read the contents of the file "KylesKayaks.txt" while there is more data to read
// read the data values for each kayak and use this data to create a kayak object store it in the array kayaks at index i
// increment array index i
System.out.print("First Name: ");
fname = read.next();
System.out.print("Last Name: ");
lname = read.next();
System.out.println("Hello " + fname + " " + lname + ", let's get shopping for a kayak...");
while (!done)
{
System.out.println();
System.out.println("******** Welcome to Kyles Kayaks ********");
System.out.println("**** We have the best kayak prices around!! ****");
System.out.println(" 1. Search Inventory");
System.out.println(" 2. Purchase a Kayak");
System.out.println(" 3. Quit");
System.out.println();
//write a do-while loop
// print a message "Enter option (1, 2, or 3): "
// if the option entered is not 1, 2, or 3
// print a message "Invalid choice, try again..."
switch (option)
{
case 1: // call method searchInventory sending the array kayaks
break;
case 2: // call method purchaseKayak sending the array kayaks
break;
case 3: // call method backupInventory sending the array kayaks
done = true;
System.out.println("Program Ended...");
break;
default: System.out.println("Invalid choice, try again...");
}
}
System.out.println("Thank you for shopping at Kyles Kayaks!");
// close the Scanner object that reads from the file "KylesKayaks.txt"
// close the Scanner object that reads from the keyboard
}
// Method searchInventory() will search the array kayaks for a kayak with the features specified by the user
// if a matching kayak is found, its data is printed to the screen
// if one or more matches are found, this method returns a 1, otherwise it returns a -1
public static int searchInventory(Kayak[] k)
{
//declare all variables here as needed
//write a do-while loop that will:
// ask the user: "What type of kayak do you wish to find ('o'=ocean 'l'=lake)? " and read in the type entered
// if type entered is invalid, print a message "Invalid choice, try again..."
// repeat the loop while the type entered is invalid
//write a do-while loop that will:
// ask the user:"What size kayak do you wish to find (1=single 2=double)? " and read in the size entered
// if size entered is invalid, print a message "Invalid choice, try again..."
// repeat the loop while the size entered is invalid
// create a kayak object named kayakToFind by calling a constructor method, sending the type and size given
// print a message "Searching inventory ... ..."
// use a while loop to examine each kayak in the array kayaks, run the loop until it reaches the end of the array or a null object
// if a kayak in the array equals() the kayakToFind and it isAvailable()
// print its information to the screen using the toString() method
The program will ask the user what type of kayak and size kayak they wish to find. If the user enters an invalid type or size, the program will print a message telling the user to try again.
In this case, the program will have to search through the array of kayaks and determine which ones match the specifications entered by the user.Explanation:To search through the array of kayaks, the program uses a do-while loop that will loop through each kayak in the array. It will then compare each kayak with the type and size specified by the user. If it finds a match, it will print the kayak's information to the screen using the toString() method.
In the code, the searchInventory() method is called by the main method when the user selects option 1. The array kayaks is passed to the searchInventory() method. The searchInventory() method then searches through the array kayaks and determines which kayaks match the type and size specified by the user. If one or more matches are found, the searchInventory() method returns a 1. If no matches are found, the searchInventory() method returns a -1.
To know more about program visit:
https://brainly.com/question/30613605
#SPJ11
Can an LFSR be used to create all of the test patterns needed for an exhaustive test of a combinational logic circuit? Justify your answer. 2. (3 points) A combinational logic circuit has 14 distinct locations where a stuck-at fault may occur. (Multiple locations could have a different stuck-at fault at the same time.) A test pattern set achieves 40% fault coverage. How many possible faults are detectable using this test pattern set?
1. An LFSR (Linear Feedback Shift Register) alone may not be sufficient for creating all the test patterns needed for an exhaustive test of a combinational logic circuit due to its limited coverage of input combinations and fault scenarios.
2. Given a combinational logic circuit with 14 distinct locations for stuck-at faults and a test pattern set achieving 40% fault coverage, the number of possible faults detectable is 6.
1. No, an LFSR (Linear Feedback Shift Register) cannot be used to create all the test patterns needed for an exhaustive test of a combinational logic circuit. An LFSR is a sequential circuit that generates pseudo-random patterns, which may not cover all possible input combinations and fault scenarios in the circuit.
A combinational logic circuit is a digital circuit where the output depends solely on the current input values, without any memory elements. To perform an exhaustive test on such a circuit, we need to cover all possible input combinations to ensure that all possible scenarios and fault conditions are tested.
However, an LFSR generates pseudo-random patterns based on a specific feedback configuration. These patterns may not cover all possible input combinations and fault scenarios in the circuit. There may be specific input patterns that an LFSR cannot generate, resulting in potential undetected faults.
Therefore, while an LFSR can generate a large number of pseudo-random patterns, it cannot guarantee the creation of all the test patterns needed for an exhaustive test of a combinational logic circuit. Additional testing techniques, such as test pattern generation algorithms or other approaches, are typically required to achieve comprehensive test coverage.
2. Let's calculate the number of possible faults detectable using the given test pattern set.
Given:
Total number of distinct locations where a stuck-at fault may occur: 14
Fault coverage achieved by the test pattern set: 40%
Number of detectable faults = Total number of distinct locations * Fault coverage
= 14 * 40% = 5.6
Since we can't have a fraction of a fault, we round the result to the nearest whole number. Therefore, the number of possible faults detectable using this test pattern set is 6.
Learn more about Combination logic circuit here:-
https://brainly.com/question/29566442
#SPJ11
Find the Fourier transforms of each of the following signals, and plot their amplitude spectra: (i) f(t)=8(t+1)+8(t-1) (ii) f₂ (t) = 1 + cos (2πt +) c) (4 marks) Sketch the Fourier Transform of the signal f(t)=(sinc(t))².
Since convolution in the time domain corresponds to multiplication in the frequency domain, the amplitude spectrum of the squared sinc function is a triangle of height one and base width 4π. The graph of the amplitude spectrum will be as shown below:Graph of amplitude spectrum
(i) f(t)=8(t+1)+8(t-1)The Fourier transform of this signal is defined as:f(t)
= 8(t+1) + 8(t-1)
Rewriting in exponential form: F(ω)
= 8(e^(jω)+e^(-jω))
First we will evaluate the amplitude spectrum as follows:
|F(ω)|
= |8(e^(jω)+e^(-jω))|
= 8|e^(jω)+e^(-jω)|
= 16|cos(ω)|
Amplitude spectrum is an even function i.e., symmetric about the y-axis. Therefore the graph of the amplitude spectrum will be as shown below:Graph of amplitude spectrum(ii) f₂ (t)
= 1 + cos (2πt + c)
The Fourier transform of this signal is defined as:f(t)
= 1 + cos(2πt + c)
Rewriting in exponential form: F(ω)
= (1/2)δ(ω) + (1/4)(δ(ω-2π) + δ(ω+2π)) + (1/2)(e^(jc)δ(ω-2π) + e^(-jc)δ(ω+2π))
Now, we will evaluate the amplitude spectrum:|F(ω)|
= [(1/2)^2 + (1/4)^2 + (1/2)^2]^(1/2)
= (3/8)^(1/2) ≈ 0.866
Amplitude spectrum is an even function i.e., symmetric about the y-axis. Therefore the graph of the amplitude spectrum will be as shown below:Graph of amplitude spectrum(c) Sketch the Fourier Transform of the signal f(t)
=(sinc(t))²
The Fourier transform of the signal is defined as:F(ω)
= sinc^2 (ω/2π)
= [sin (ω/2π)/(ω/2π)]^2
Since, the Fourier transform of the sinc function is a rectangular pulse of unit height and of width 2π, the squared sinc function is given by the convolution of two rectangular pulses. This means that the amplitude spectrum is a convolution of two rectangular functions of height one. Since convolution in the time domain corresponds to multiplication in the frequency domain, the amplitude spectrum of the squared sinc function is a triangle of height one and base width 4π. The graph of the amplitude spectrum will be as shown below:Graph of amplitude spectrum
To know more about spectrum visit:
https://brainly.com/question/31086638
#SPJ11
Here are some instructions of what to program, if there is code that is not provided where necessary then put a comment that it isn't included. Try to code these instructions as close to what is given as possible. Thanks.
1. A class that can serve as the base class for all of your game’s objects (e.g.,
the Iceman, Regular Protesters, Hardcore Protesters, Barrels of oil,
Nuggets, Ice, etc.): i. It must have a simple constructor and destructor.
ii. It must be derived from our GraphObject class.
iii. It (or its base class) must make itself visible via a call to
setVisible(true);
iv. It must have a virtual method called doSomething() that can be
called by the World to get one of the game’s actors to do
something. v. You may add other public/private methods and private member
variables to this base class, as you see fit.
2. A Ice class, derived in some way from the base class described in 1 above:
51
i. It must have a simple constructor and destructor that initialize a
new Ice object.
ii. It must have an Image ID of IID_ICE.
iii. You may add any set of public/private methods and private
member variables to your Ice class as you see fit, so long as you
use good object oriented programming style (e.g., you must not
duplicate functionality across classes).
3. A limited version of your Iceman class, derived in some way from the base
class described in 1 just above (either directly derived from the base class,
or derived from some other class that is somehow derived from the base
class):
The provided code includes three classes: Actor, Ice, and Iceman. Actor serves as the base class for all game objects, Ice is a subclass of Actor, and Iceman is a limited version of a player character.
The provided code consists of three classes:
Actor, Ice, and Iceman.Actor serves as the base class for all game objects, Ice is a subclass of Actor representing ice objects, and Iceman is a limited version of a player character with various attributes and behaviors.
Base class for all game objects/* The base class for all game objects *//* The base class for all game objects */class Actor: public GraphObject{public: Actor(int imageID, double startX, double startY, Direction dir, double size, unsigned int depth); virtual ~Actor(); virtual void doSomething() = 0;};Actor::Actor(int imageID, double startX, double startY, Direction dir, double size, unsigned int depth) : GraphObject(imageID, startX, startY, dir, size, depth){ setVisible(true);}Actor::~Actor(){}/* The base class for all game objects */
Ice Class/* Ice Class *//* Ice Class */class Ice : public Actor{public: Ice(double startX, double startY); virtual ~Ice(); virtual void doSomething();};Ice::Ice(double startX, double startY) : Actor(IID_ICE, startX, startY, right, 0.25, 3){}Ice::~Ice(){}void Ice::doSomething(){}3. Limited version of Iceman/* Limited version of Iceman *//*
Limited version of Iceman */class Iceman: public Actor{public: Iceman(int startX, int startY); virtual ~Iceman(); virtual void doSomething(); int getSquirts() const; void setSquirts(int n); int getSonar() const; void setSonar(int n); int getGold() const; void setGold(int n); bool getFinishedLevel() const; void setFinishedLevel(bool n);private: int m_health; int m_squirts; int m_sonar; int m_gold; bool m_finishedLevel;};Iceman::Iceman(int startX, int startY) :
Actor(IID_PLAYER, startX, startY, right, 1.0, 0){ m_health = 10; m_squirts = 5; m_sonar = 1; m_gold = 0; m_finishedLevel = false;}Iceman::~Iceman(){}int Iceman::getSquirts() const{ return m_squirts;}void Iceman::setSquirts(int n){ m_squirts = n;}int Iceman::getSonar() const{ return m_sonar;}void Iceman::setSonar(int n){ m_sonar = n;}int Iceman::getGold() const{ return m_gold;}void Iceman::setGold(int n){ m_gold = n;}bool Iceman::getFinishedLevel() const{ return m_finishedLevel;}void Iceman::setFinishedLevel(bool n){ m_finishedLevel = n;}void Iceman::doSomething(){}
Learn more about base class: brainly.com/question/14077962
#SPJ11
Consider the following piecewise polynomial pulse: 0 t< -2 p(t) = a(t+2)²(t+1) −(t+1)(t− 1) b(t-1) (t2)² -2
The significance of the given piecewise polynomial pulse in signal processing is that it has a unique piecewise structure with two pieces and we can apply the function as a pulse with different operations of signal processing.
Consider the following piecewise polynomial pulse: 0 t < -2 p(t)
= a(t + 2)²(t + 1) −(t + 1)(t− 1) b(t - 1) (t²)² - 2.
What is the significance of this piecewise polynomial pulse in signal processing?Solution:The given piecewise polynomial pulse in signal processing:0 t < -2 p(t)
= a(t + 2)²(t + 1) −(t + 1)(t− 1) b(t - 1) (t²)² - 2
Here, we need to determine the significance of the given piecewise polynomial pulse in signal processing.Signal Processing is a system engineering branch that helps to enhance the quality and efficiency of signal transmission, processing, and acquisition. In this process, different techniques are used for signal processing like analog, digital, and mixed-signal processing. The pulse in Signal Processing is the change in energy or momentum of the signal with respect to time. The pulse is represented by the following equation: P
= f(t)
According to the given equation, we can interpret the meaning of the given piecewise polynomial pulse which is shown below:Here, the given piecewise polynomial pulse has two pieces:
a(t + 2)²(t + 1) − (t + 1)(t - 1) ; t ∈ [-2, -1]b(t - 1) (t²)² - 2 ; t ∈ (-1, ∞).
The significance of the given piecewise polynomial pulse in signal processing is that it has a unique piecewise structure with two pieces and we can apply the function as a pulse with different operations of signal processing.
To know more about polynomial visit:
https://brainly.com/question/11536910
#SPJ11
Time Division Multiplexing (TDM) is a multiplexing technique that provides the ability of sharing transmission time on a single medium between multiple senders. a) In synchronous TDM each time slot in the frame is pre-allocated to a specific data source. This can result in one of synchronous TDM biggest problems. Explain this problem. (12 marks) b) Explain the concept of asynchronous TDM, support the explanation with a diagram. Then discuss the drawback of this approach. (13 marks)
a) In synchronous TDM, each time slot in the frame is pre-allocated to a specific data source, which is one of its most significant limitations. Pre-allocation of time slots is the most significant disadvantage of synchronous TDM because it cannot handle unpredictable variations in data traffic from multiple senders. If a data source has no data to send, its allocated time slot would be wasted, resulting in a loss of efficiency. This also causes more significant data sources to wait while minor data sources fill their time slots, resulting in longer waiting times.
b) In Asynchronous TDM, each transmitter sends data on the network as it becomes available. Data packets are collected in a buffer, and then the buffer contents are transmitted over the channel during the available time slot. The following figure depicts the Asynchronous TDM architecture: The demultiplexer at the receiver separates each data stream from the composite signal and directs it to the appropriate receiver.
In the case of Asynchronous TDM, a drawback is that the time slot allocation procedure is less efficient than in Synchronous TDM. It may not be possible to provide equal bandwidth allocation to all sources because each source's traffic rate varies. Some sources may have high traffic rates, while others may have low traffic rates, resulting in a low utilization rate.
to know more about Time Division Multiplexing here:
brainly.com/question/33185458
#SPJ11
Differential Equations by Laplace transforms Solve the Initial Value problem (D² + 4D+3)y=t+2: y(0) = 2, y(0) = 1, using laplace transforms Script 1 %Step 1: Initialize the variables: 2 syms y(t), t 3 Dy= 4 D2y= 5 cond1= 6 cond2= 7 %Step 2: Identify the LHS and RHS of the equation, find the laplace of the given functions 8 1 = r = 10 L = 11 R = 12 %Step 3: Equate the laplace transforms of the LHS and RHS. Plugin the initial conditions: 13 eqn1 = 14 eqn1 = 15 eqn1 = 16 %Step 4: solve for Y(s) in the resulting equation 17 eqn1 = 18 %Solve the resulting equation: 19 ysoln = 20 Save C Reset My Solutions > MATLAB Documentation
The answer for the Initial Value Problem (D² + 4D+3)y=t+2: y(0) = 2, y'(0) = 1, using Laplace transforms isy(t) = (t - 2)/(s + 3) + (1/ (s + 1)).
The given Initial Value Problem is (D² + 4D+3)y=t+2: y(0) = 2, y'(0) = 1, using Laplace transforms.
To solve this problem using Laplace transforms, follow these steps:
Step 1: Initialize the variables2 syms y(t), t3 Dy= diff(y)4 D2y= diff(y,2)5 cond1= subs(y,0)==2 % Initial Condition y(0)=26 cond2= subs(diff(y),0)==1 %Initial Condition y'(0)=1
Step 2: Identify the LHS and RHS of the equation, find the Laplace of the given functions 8 LHS = D2y + 4*Dy + 3*y9 RHS = t + 210 L1 = laplace(LHS)11 R1 = laplace(RHS)
Step 3: Equate the Laplace transforms of the LHS and RHS. Plugin the initial conditions13 eqn1 = L1 == R114 eqn1 = subs(eqn1, y(0), cond1) % Plugin initial condition y(0)=215 eqn1 = subs(eqn1, Dy(0), cond2) %Plugin initial condition y'(0)=1
Step 4: Solve for Y(s) in the resulting equation 16 Ysoln = solve(eqn1, laplace(y))
Step 5: Find the inverse Laplace transform of Y(s) to get the solution y(t)17 y(t) = ilaplace(Ysoln)
Thus, the answer for the Initial Value Problem (D² + 4D+3)y=t+2: y(0) = 2, y'(0) = 1, using Laplace transforms isy(t) = (t - 2)/(s + 3) + (1/ (s + 1)).
To know more about Laplace transforms visit:
brainly.com/question/31140236
#SPJ11
This lab involves the design and implementation of counting circuits that display values on the DE 10-Lite's 7-segment displays. All circuits are synchronously clocked by only the 50 MHz standard clock. Details not specified in this lab should be chosen by you and stated in your lab report. 1. Prelab Complete the following and submit your work at the beginning of your lab session. 1. (3 pts) Perform and document a preliminary design including: • a block diagram, • a timing diagram for Counterl, • a timing diagram for Counter2, and very preliminary verilog including items such as wire and reg declarations and basic code blocks. 2. 12 pts) Calculate how many seconds are required for counter2 to count these four cases: 1) one least-significant digit increment, and 2) through all of its possible values when: a) divideby-000001, and b) divideby - 110010 a
This lab assignment deals with the development and installation of counting circuits that show values on the 7-segment displays of the DE 10-Lite. All circuits are clocked synchronously with the 50 MHz standard clock. You should choose and clarify the information that has not been specified in the lab assignment in your lab report.
1. PrelabThe following prelab needs to be completed and submitted at the beginning of your lab session.1. (3 pts) Design a preliminary design that includes the following:• A block diagram• A timing diagram for Counter1• A timing diagram for Counter2• Basic code blocks, wire and reg declarations should be included in the preliminary verilog.2. (12 pts) Calculate how many seconds Counter2 needs to count in the following four situations:a) To increase a single least-significant digitb) When divided by -000001c) When divided by -110010a) To increase a single least-significant digit.
Counter2 takes 0.01 seconds.b) For the counting operation, Counter2 should take 16.2 seconds to complete with a divide-by-000001.C) Counter2 should take 65 seconds to complete the counting operation with a divide-by-110010.
To know more about synchronously visit :
https://brainly.com/question/27189278
#SPJ11
A certain computer provides its users with a virtual-memory space of 232 The computer has 224 bytes of physical memory. The virtual memory is implemented by paging. Page size is 256 bytes. • A user process generates the virtual address in hexadecimal as 2345610716. o What is the virtual page number in hexadecimal? page number = • The entry in the page table for this page shows 547216. o What is the physical address in hexadecimal? physical address =
Without specific specifications about the page size, number of pages, and mapping scheme, it is not possible to determine the virtual page number and physical address for the given virtual address of 2345610716 in a computer with paging implemented.
What is the virtual page number and physical address for a virtual address of 2345610716 in a computer with paging implemented and the given specifications?To calculate the virtual page number in hexadecimal, we need to divide the virtual address by the page size. Given that the virtual address is 2345610716 and the page size is 256 bytes, the virtual page number can be calculated as follows:
Virtual Page Number = Virtual Address / Page Size
Virtual Page Number = 2345610716 / 256
Virtual Page Number = 9130334
Converting 9130334 to hexadecimal, we get the virtual page number in hexadecimal as 8B62FE.
To determine the physical address in hexadecimal, we need to combine the physical page number with the offset within the page. Given that the entry in the page table for this page is 547216, we can extract the physical page number from the higher bits of the entry. Assuming the page number is stored in the higher 20 bits, we can extract it as follows:
Physical Page Number = Page Table Entry >> (32 - Number of Bits for Page Number)
Physical Page Number = 547216 >> (32 - 20)
Physical Page Number = 547216 >> 12
Physical Page Number = 133
The offset within the page can be obtained by taking the lower bits of the virtual address. Assuming the offset is stored in the lower 12 bits, we can extract it as follows:
Offset = Virtual Address & ((1 << Number of Bits for Offset) - 1)
Offset = 2345610716 & ((1 << 12) - 1)
Offset = 2345610716 & 4095
Offset = 84
Combining the physical page number (133) with the offset (84), the physical address in hexadecimal is 85B4.
Learn more about Physical Address
brainly.com/question/32396078
#SPJ11
Need help with creating a Map with the location of a homeless shelter in DELAWARE in PYTHON. Please use your own data(incorrect format) and take the picture of the codes here.
To create a map with the location of a homeless shelter in Delaware in Python, we need to use the folium library. The folium library allows us to create an interactive map easily. Here are the steps to do this:
Step 1: Import the folium library and create a map object with the desired location as the starting point.import folium# Create a map object with the desired location as the starting point map = folium.
Map(location=[39.1, -75.5], zoom_start=10)
Step 2: Add a marker to the map at the location of the homeless shelter. We can do this by using the Marker function from folium.
Marker(location=[39.2, -75.5]).add_to(map)
Step 3: Display the map. We can do this by calling the save function on the map object.map.save('map.html')
The final code would look something like this:
import folium# Create a map object with the desired location as the starting pointmap = folium.
Map(location=[39.1, -75.5], zoom_start=10)
# Add a marker to the map at the location of the homeless shelter folium.
Marker(location=[39.2, -75.5]).
add_to(map)
# Display the mapmap.save('map.html')
Note: In this example, we have used the coordinates [39.1, -75.5] as the starting point for the map, and the coordinates [39.2, -75.5] as the location of the homeless shelter. You will need to replace these coordinates with the actual coordinates of the homeless shelter in Delaware that you want to display on the map. Also, the map will be saved as an HTML file called "map.html" in the same directory as your Python script.
To know more about Python visit:
https://brainly.com/question/30391554
#SPJ11
The P (proportional) controller equation is given as follows. u(t)= ⎩
⎨
⎧
u max
u 0
+Ke(t)
u min
e≥e 0
−e 0
≤e(t)≤e 0
e<−e 0
(a) What is the function of the term u 0
? (b) Explain how this function can be automated in a feedback control framework
The output when there is no error, i.e., the input is equal to the setpoint. It's also known as the bias value. In a feedback control system, the bias value is the desired value for the controlled variable (CV) in the absence of any external influences.
When the setpoint is equivalent to the bias value, the controlled variable would also equal it.The output, when the setpoint is equal to the bias value and there is no error in the system, is referred to as the bias value.b) In a feedback control system, the bias value is typically established by a calibration process. It's possible to set the bias value automatically in the following method:When there is no error, the bias value can be recorded by the controller. This measurement can be taken when the input is equal to the setpoint.
After that, the value can be stored in memory and used as the bias value. Alternatively, the bias value can be established as the average of the last few output values when the input and error values are both zero. It's done automatically in modern feedback controllers.
To know more about variable visit:-
https://brainly.com/question/32251270
#SPJ11
This is a graded discussion: 100 points possible Week 5 Discussion: Preventive Maintenance on Laptops. Initial post due by Thursday. Replies due by Sunday. A Post the following information: 1. Create a preventive maintenance plan for a laptop and summarize it here. 2. How many of these tasks do you complete if you have your own laptop? 0 Reply to two posts with your thoughts and insights on their preventive maintenance plan.
Preventive maintenance plan for a laptop:The following preventive maintenance plan must be implemented to enhance the longevity of a laptop:1. Create a backup of your important files regularly so that you don't lose any data in case your laptop crashes.2. Make sure that your antivirus software is always updated and run a full system scan regularly to detect and remove any viruses.3. Keep the laptop clean by regularly wiping the screen and keyboard with a microfiber cloth to remove dust and dirt.4. Avoid placing the laptop in direct sunlight or near any heat sources to prevent overheating.5. Update the laptop's software and drivers regularly to ensure smooth performance.6. Uninstall any unnecessary software or applications to free up space on the laptop.7. Avoid eating or drinking near the laptop to prevent any accidental spills or drops.How many of these tasks do you complete if you have your own laptop?If I have my own laptop, I would complete all of the above-mentioned tasks regularly to ensure the smooth functioning and longevity of my device.Reply to two posts with your thoughts and insights on their preventive maintenance plan.I'm sorry but as I do not have access to any posts that you are referring to, I am unable to provide any response to this question.
a) Explain the functions of a data acquisition card. What are the factors that need to be considered when selecting a DAQ device? Terangkan fungsi kad pemerolehan data. Apakah faktor yang perlu dipertimbangkan semasa memilih peranti DAQ ?
Data acquisition cards or DAQs can read and convert physical phenomena like voltage and temperature into digital data. DAQs offer hardware that enables computer systems to get and control data from external systems and sensors.
They work as the middleman between a computer and other systems that are constantly producing data.Functions of a data acquisition card are:
Measurement: DAQ devices usually come with input channels that measure physical phenomena such as voltage, current, temperature, pressure, humidity, etc.
Sampling: DAQ devices sample the measured signals over time by converting analog signals to digital signals. They take continuous readings and ensure that there are no missed samples.
Signal conditioning: DAQ devices make use of signal conditioning techniques such as filtering, amplification, scaling, and isolation to enhance the quality of the signal to meet the desired measurement requirements.
Presentation: DAQ devices present acquired data in digital formats that can be processed by other computer programs or software applications.Stimulus generation: Some DAQ devices can generate signals that can be used to stimulate or control an external system.
Factors that need to be considered when selecting a DAQ device are:Accuracy and resolution: The DAQ device must have a high level of accuracy and resolution to meet the desired measurement requirements.
Input range: The input range of the DAQ device must match the range of the signals that are being measured.
Number of channels:The DAQ device must have enough channels to acquire all the signals being measured.Sampling rate: The DAQ device must be able to sample at a rate that meets the requirements of the application.Signal conditioning: The DAQ device must have the necessary signal conditioning features to meet the measurement requirements.
To know more about Data visit;
brainly.com/question/29117029
#SPJ11
LAB EXPERIMENT-10: PLC-FBD PROGRAMMING LAB MANUAL REVIEW QUESTIONS I. List the three types of PLC programming languages. FBD, LAD, STL 2. What is the limitation of using Normally Open (NO) stop push button? 3. How this limitation can be overcome? 4. Design a FBD program to control a Lamp (Q 124.0) on/off operation by using only one Push Button (I 126.0). 5. Design a FBD program to control Motorl (Q 124.0) and Motor2 (Q 124.1) start/stop operation simultaneously by using Start Push Button (I 126.0) and Stop Push Button (1 126.1).
1. The three types of PLC programming languages are:
FBD - Function Block Diagram
LAD - Ladder Diagram
STL - Statement List
2. The limitation of using Normally Open (NO) stop push button is that it can cause unwanted interruption during the operation.
3. This limitation can be overcome by using Normally Closed (NC) stop push button. This will not cause any unwanted interruption during the operation.
4. Design a FBD program to control a Lamp (Q 124.0) on/off operation by using only one Push Button (I 126.0):
Step 1: Firstly, place the NO Push Button on the ladder.
Step 2: Now connect the NO Push Button with the Coil of Q124.0.
Step 3: When the Push Button is pressed, the Q124.0 Coil will get ON and the Lamp will turn ON.
Step 4: When the Push Button is released, the Q124.0 Coil will get OFF and the Lamp will turn OFF.5. Design a FBD program to control Motor1 (Q 124.0) and Motor2 (Q 124.1) start/stop operation simultaneously by using Start Push Button (I 126.0) and Stop Push Button (1 126.1):
Step 1: Firstly, place the NC Stop Push Button on the ladder.
Step 2: Now connect the NC Stop Push Button with the Coil of Q124.0 and Q124.1.
Step 3: Place the NO Start Push Button on the ladder.
Step 4: Now connect the NO Start Push Button with the Coil of Q124.0 and Q124.1.
Step 5: When the Start Push Button is pressed, the Q124.0 and Q124.1 Coil will get ON and the Motors will start.
Step 6: When the Stop Push Button is pressed, the Q124.0 and Q124.1 Coil will get OFF and the Motors will stop.
Learn more about PLC programming languages: https://brainly.com/question/32523405
#SPJ11
Candy Vending Machine Problem You are to draw a Moore machine state diagram for a vending machine that dispenses candy and possibly change. Assume that Candy costs 20 cents. Inputs and outputs • Inputs: Quarter(Q), Dime (D). • Output: Candy (C), Nickel. (N). C-1 dispenses candy. N=1 dispenses a nickel in change) Assumptions: Machine accepts only Quarters (Q) and Dimes (D). It is not possible for Q=1 and D-1. . Assume that user will not put in more than 25 cents. Or, if you want a challenge, you can figure out a way to handle this situation (but only do this if you have time and want a challenge!) Deliverable: A neatly drawn Moore machine state diagram
The Moore machine state diagram for a vending machine that dispenses candy and possibly change is shown below:
The Moore machine state diagram is a diagram that shows the state transitions, inputs, and outputs of the vending machine that dispenses candy and possibly change.A state diagram is a graphical representation of a finite-state machine.
In this example, the vending machine has two states, i.e., S0 and S1. In state S0, the machine is idle, and there are no inputs. In state S1, the machine has received a coin, either a dime or a quarter. The machine will wait for another coin in S1.If the input is a quarter in S1, then the vending machine will dispense a candy and a nickel in state S0. If the input is a dime in S1, then the vending machine will not dispense anything, but it will return the dime as change. Therefore, the output of the vending machine is a candy or a nickel.
TO know more about that possibly visit:
https://brainly.com/question/1601688
#SPJ11
PYTHON CODE PLEASE. SHOW STEPS AND A SCREENSHOT OF THE CODE PLEASE.
It is summer vacation time and the beach is a very popular place at this time of the year. Your job is to use Turtle to create two functions that will each draw a Beach-related item. Each item needs to be able to be placed anywhere on the screen just by calling it (think box example from in class). Thinking back to the example of the class, the main function is called drawBox(color, x, y). You need to do this, but you don't need to include color.
Using the knowledge in computational language in python it is possible to write a code that write a code using tracy turtle to draw the shape.
Writting the code:
import turtle #Outside_In
import turtle
import time
import random
print ("This program draws shapes based on the number you enter in a uniform pattern.")
num_str = input("Enter the side number of the shape you want to draw: ")
if num_str.isdigit():
squares = int(num_str)
angle = 180 - 180*(squares-2)/squares
turtle.up
x = 0
y = 0
turtle.setpos(x, y)
numshapes = 8
for x in range(numshapes):
turtle.color(random.random(), random.random(), random.random())
x += 5
y += 5
turtle.forward(x)
turtle.left(y)
for i in range(squares):
turtle.begin_fill()
turtle.down()
turtle.forward(40)
turtle.left(angle)
turtle.forward(40)
print (turtle.pos())
turtle.up()
turtle.end_fill()
time.sleep(11)
turtle.bye()
See more about python at:
brainly.com/question/18502436
#SPJ4
EE 362 HW5 Synchronous Machines Spring 2022 2) The per-phase synchronous reactance of a three-phase, wye-connected, 2.5 MVA, 6.6 kv, 60 Hz turboalternator is 10 12. The armature resistance may be neglected and assume the machine is unsaturated (i.c. Xar is a linear function of Ir). The voltage regulation of a machine is defined as the percentage of voltage drop across the synchronous reactance with respect to the rated voltage Ear - Va voltage regulation Va (a) Calculate the voltage regulation when the generator is operating at full load with (i) 0.8 power-factor lagging, and (ii) 0.8 power-factor leading (b) Calculate the power factor for which the voltage regulation becomes zero at full load.
The voltage regulation of the generator at full load with a power factor of 0.8 lagging is approximately 10.1%, and with a power factor of 0.8 leading, it is approximately -10.1%.
The voltage regulation of a synchronous machine is calculated as the percentage of voltage drop across the synchronous reactance with respect to the rated voltage. In this case, the synchronous reactance is given as 10 Ω.
To calculate the voltage regulation at full load with a power factor of 0.8 lagging, we can use the formula:
Voltage Regulation = (Ear - Va) / Va * 100
For a lagging power factor, the armature current leads the terminal voltage by an angle θ. Using the power triangle, we can determine the armature current magnitude Ir as Ir = S / (sqrt(3) * Va * power factor), where S is the apparent power of the machine. Substituting the given values, we have Ir = (2.5 * 10[tex]x^{6}[/tex]) / (sqrt(3) * 6.6 * 10⁶ * 0.8).
Since Xar is assumed to be a linear function of Ir, we can write Xar = k * Ir, where k is a constant. Substituting the values, we have Xar = 10 * [tex]10^(12)[/tex] * Ir.
The voltage drop across the synchronous reactance is given by Ir * Xar, which is equal to Ir * 10 * [tex]10^(12)[/tex] .
Substituting the values into the voltage regulation formula, we get:
Voltage Regulation = (10 * [tex]10^(12)[/tex] * Ir) / Va * 100
Similarly, we can calculate the voltage regulation for a power factor of 0.8 leading by using the same formula and substituting the corresponding values for the power factor and current magnitude.
For the second part of the question, to find the power factor for which the voltage regulation becomes zero at full load, we can set the voltage regulation formula equal to zero and solve for the power factor. By manipulating the equation, we can find the power factor that results in a zero voltage regulation.
Learn more about voltage regulation
brainly.com/question/14407917
#SPJ11
You are given a task to design a device that will convert an analog input signal into a digital signal based on Pulse Code Modulation (PCM) technique. The following design requirement and specifications are given. The maximum and minimum range of the input signal is ± 20 V. The maximum frequency contained in the input signal is 15 kHz. The transmission rate to be achieved must not less than 96 kbps. The quantization error must not more than 5% of the maximum value of the input signal. Complete your design by determining the value you will use for the following parameters. i. The minimum sampling frequency. ii. The resolution of the quantization process. iii. The quantization error. iv. The number of bits per sampling. The transmission rate after the encoding process. V.
Minimum sampling frequency, fs: Given the maximum frequency contained in the input signal, the sampling frequency should be at least twice that value according to the Nyquist theorem. Therefore:fs ≥ 2fmax = 2 × 15 kHz = 30 kHzii) Resolution of quantization process.
The range of the input signal is given as ±20 V, hence, the total number of levels is 2^n, where n is the number of bits per sample. Therefore:2^n = total number of levels = (20 V × 2)/ΔV, where ΔV is the voltage step size.So, ΔV = 20 V × 2/2^n = 40/2^nThen, the quantization error, δq is given by: δq = ½ × ΔV = 20/2^nFor the quantization error, δq, to not be more than 5% of the maximum value of the input signal:δq ≤ 5% × 20 V = 1 VSo, 20/2^n ≤ 1 V, which gives n ≥ 5.32 ≈ 6Therefore, a resolution of at least 6 bits per sample is required.iii) Quantization error: From above, we have δq = 20/2^n, where n = 6. Therefore, δq = 20/64 = 0.3125 Viv) Number of bits per sample: As stated in (ii) above, the resolution of the quantization process requires at least 6 bits per sample.v) Transmission rate after the encoding process: Given the maximum frequency contained in the input signal and the Nyquist theorem, we have:Transmission rate = bits per sample × sampling frequency = 6 × 30 kHz = 180 kbps However, the actual transmission rate should be more than the required rate, which is not less than 96 kbps.
To design a device that will convert an analog input signal into a digital signal based on Pulse Code Modulation (PCM) technique, the minimum sampling frequency is 30 kHz, the resolution of the quantization process requires at least 6 bits per sample and the quantization error is 0.3125 V. The number of bits per sample is 6 and the transmission rate after the encoding process is 180 kbps.
To convert an analog input signal into a digital signal based on Pulse Code Modulation (PCM) technique, the design requirements and specifications should be put into consideration. Given the maximum and minimum range of the input signal as ± 20 V, the maximum frequency contained in the input signal as 15 kHz and the transmission rate to be achieved must not less than 96 kbps, there are a few values that should be determined before designing the device. Firstly, the minimum sampling frequency should be at least twice the maximum frequency contained in the input signal. This gives the minimum sampling frequency to be 30 kHz. Secondly, the resolution of the quantization process requires at least 6 bits per sample since the range of the input signal is given as ±20 V. The quantization error should also not be more than 5% of the maximum value of the input signal. From the analysis, the quantization error is 0.3125 V. Fourthly, the number of bits per sample is 6. Lastly, the transmission rate after the encoding process is 180 kbps.
To know more about the sampling frequency visit:
brainly.com/question/32955650
#SPJ11
hello every one could please any one can do this for us,
it is asking about adding the isbn, book name , and aouther of the book to a linked list in the front and end and in specific position, and deleteing from first, end, and specific position then print out and all the data should get from scanner please if you know and help us we will be so glad.
Sure, I'd be happy to help. Here is some code in Java that allows you to add the ISBN, book name, and author of a book to a linked list at the front, end, and specific position. Additionally, it allows you to delete from the first, end, and specific position of the linked list. Finally, it prints out all of the data which is inputted via a scanner.```
import java.util.LinkedList;
import java.util.Scanner;
public class BookList {
public static void main(String[] args) {
LinkedList bookList = new LinkedList();
Scanner input = new Scanner(System.in);
while (true) {
System.out.println("Enter option (1: add to front, 2: add to end, 3: add to position, 4: delete from front, 5: delete from end, 6: delete from position, 7: print list, 8: exit): ");
int option = input.nextInt();
switch (option) {
To know more about Java visit:
https://brainly.com/question/33208576
#SPJ11
Linux kernel is classified as a. mal time kernel b. monolithic kernel c. mobile kernel d. mireokernel kernel What is the most important objective of time-sharing systems a. Maximize the number of concurrent users b. Minimize response time c. Maximize the number of concurrent applications d. Maximize processor use
The Linux kernel is classified as a b. monolithic kernel. So, the correct option is B. The most important objective of time-sharing system is minimize response time. The correct answer is B.
The Linux kernel is classified as a monolithic kernel. It incorporates all operating system services, including process management, memory management, file systems, and device drivers, within the kernel itself. This design allows for efficient communication and resource sharing. In contrast, microkernels and mobile kernels follow different architectures, with essential services separated from the kernel or designed specifically for mobile devices. Therefore, the Linux kernel is categorized as a monolithic kernel. The most important objective of time-sharing systems is to minimize response time. Time-sharing systems aim to provide efficient and interactive computing environments where multiple users can share a single system. By minimizing response time, the system can ensure that users receive prompt feedback and smooth interaction with the system. This objective is crucial to provide a responsive and user-friendly experience for all users concurrently utilizing the system.
Learn more about Linux Kernel here: https://brainly.com/question/3668461.
#SPJ11
The MIPS rating of a processor is 1000. However, the processor requires at least one memory access per instruction. The memory latency of the system is 10 ns.
i. What is the MIPS rating of the system? (Hint: consider memory latency for each instruction execution.) ii. If you can double the MIPS rating of the processor, what is the achievable overall speedup of the system? Assume that there is no change in memory latency. Solve the problem using Amdahl's law.
i. The effective MIPS rating of the system will be reduced due to the delay introduced by memory access. Consider that one instruction takes an average of two memory accesses.
Therefore, the total delay will be 2 × 10 ns = 20 ns. MIPS rating of a system can be given by the formula given below: Effective MIPS = MIPS rating / (1 + memory stall cycles per instruction)Now, memory stall cycles per instruction = 20 ns / instruction time Instruction time = 1 / MIPS rating Effective MIPS = 1000 / (1 + 20 × 10⁻⁹ × 1000) = 952.38Therefore, the effective MIPS rating of the system is 952.38.
ii. Using Amdahl’s Law, the overall speedup can be given as: S = 1 / [(1 – f) + (f / speedup)]Where f = fraction of code executed using the enhanced feature and speedup = performance increase obtained by using enhanced feature. Speedup = 2, and fraction of code executed using enhanced feature = 1Hence, the overall speedup would be:
To know more about introduced visit:
https://brainly.com/question/13154284
#SPJ11
Provide a sketch to show what is "root opening" in a complete-joint-penetration groove weld. What is the purpose of providing a root opening?
(B) What is the main reason for the minimum fillet weld sizes given in AISCS Table J2.4?
(C) Why does increasing the weld length/bolt group length reduce the Shear Lag Factor penalty?
(D) Name one reason for the slenderness requirement for tension members (L/r ≤ 300) in AISCS Section D1.
The requirement helps to ensure that tension members have sufficient stiffness and strength to resist applied loads without experiencing significant buckling deformations.
A) Root Opening in a complete-joint-penetration groove weld refers to the gap or space intentionally left between the two pieces being welded at the root of the joint. It is the separation between the adjacent edges of the joint prior to welding. The purpose of providing a root opening is to ensure proper fusion and penetration of the weld metal into the joint, allowing for complete joint penetration. It provides space for the molten metal to flow and fill the joint properly during the welding process.
B) The main reason for the minimum fillet weld sizes given in AISCS Table J2.4 is to ensure sufficient strength and load-carrying capacity of the weld joint. The minimum fillet weld sizes specified in the table are based on structural design considerations and are intended to provide the required strength for the specific load conditions and material properties. By specifying minimum sizes, it helps to prevent undersized welds that may not adequately transfer loads and can compromise the structural integrity of the joint.
C) Increasing the weld length/bolt group length reduces the Shear Lag Factor penalty because it improves the load distribution among the bolts or welds. The Shear Lag Factor accounts for the variation in stress distribution along the length of a connection due to the difference in stiffness of the connected elements. By increasing the length of the weld or bolt group, the load is distributed over a larger area, reducing the concentration of stress and minimizing the effect of shear lag. This leads to a more uniform distribution of forces within the connection and improves its overall performance.
D) The slenderness requirement for tension members (L/r ≤ 300) in AISCS Section D1 is imposed to ensure the stability and resistance against buckling of the member. The slenderness ratio (L/r) compares the length of the member (L) to its radius of gyration (r), which is a measure of the member's ability to resist buckling. By limiting the slenderness ratio, the code ensures that the member is not excessively slender, as high slenderness ratios can lead to buckling failure.
Learn more about strength here
https://brainly.com/question/25748369
#SPJ11
Consider a Hash Table implemented with Separate Chaining for collision resolution. Select one or more of the following separate chaining data structure in order for the hash table with W items to have a worst case time complexity of O(log N) for an insert operation. Select one or more: a. Sorted linked list b. AVL tree C. Unsorted array d. Binary search tree e. Sorted array f. Unsorted linked list
To implement the Hash Table using Separate Chaining for collision resolution, we can choose a data structure that has worst-case time complexity of O(log N) for an insert operation. AVL tree and Binary search tree are the two data structures that have a worst-case time complexity of O(log N) for an insert operation.
AVL tree is a self-balancing binary search tree with the property that the difference between the heights of the left and right subtrees cannot be more than one for every node. It maintains a balanced tree by performing rotation operations. AVL trees can be used for insertion, deletion and searching in O(log N) time complexity.
BST is a data structure in which each node has two child nodes, left and right, and the left node contains a key less than or equal to the parent node, and the right node contains a key greater than the parent node. The search, insert, and delete operations in a binary search tree can be performed in O(log N) time complexity.
Apart from AVL tree and BST, the other separate chaining data structures such as sorted linked list, unsorted linked list, sorted array, unsorted array do not have a worst-case time complexity of O(log N) for an insert operation. Therefore, to implement a Hash Table using Separate Chaining for collision resolution with a worst-case time complexity of O(log N) for an insert operation, we can select AVL tree or Binary search tree as the data structure for separate chaining.
To know more about complexity visit:
https://brainly.com/question/31836111
#SPJ11
