We mixed 30 ml of 1.0 M HCl with 70 ml of 1.0 M NaOH. What is the theoretical value for the temperature increase? Express your answer in ∘C.
a) 0.0 ∘C
b) 10.0 ∘C
c) 20.0 ∘C
d) 30.0 ∘C

Answers

Answer 1

Let's determine the theoretical value for temperature increase. Option (a) is correct. The temperature change (∆T) is calculated by using the following formula:

∆T = q / m * C

where, q = heat, m = mass and C = specific heat capacity.So, we can say that:

Theoretical value of temperature increase = ∆TWe

know that:Concentration of HCl (C1) = 1.0 MConcentration of

NaOH (C2) = 1.0 MVolume of HCl (V1) = 30 ml

Volume of NaOH (V2) = 70 ml

Molar mass of HCl = 36.5 g/mol

Molar mass of NaOH = 40 g/molDensity of HCl = 1.18 g/ml

Density of NaOH = 1.25 g/ml

Specific heat of the mixture (Cp) = 4.18 J/g °C

Since, the given HCl and NaOH solutions are present in equal amounts, so their molarity and density will be the same. Now, let's find out the mass of HCl and NaOH we have taken:Mass of HCl = Volume × Density = 30 ml × 1.18 g/ml = 35.4 g Mass of NaOH = Volume × Density = 70 ml × 1.25 g/ml = 87.5 gNow, let's calculate the heat evolved in this reaction: Heat evolved (q) = m × C × ∆T, where q = 0, m = 123 g (total mass of the solution) and C = 4.18 J/g °C.Then,∆T = 0 / (123 g) × 4.18 J/g°C ∆T = 0. So, the theoretical value for the temperature increase is 0.0 °C.

To know more about temperature visit:-

https://brainly.com/question/11464844

#SPJ11


Related Questions

for the cracking reaction c3h8(g) c2h4(g) ch4(g) the equilibrium conversion is negligible at 300k, but it becomes appreciable at temperatures above 500k. for a pressure of 1 bar, determine:

Answers

The equilibrium conversion at 500 K and 1 bar is α = 1719/10000 = 0.1719. Therefore, the equilibrium conversion at 500 K and 1 bar is approximately 17.2%.

For the given reaction:C3H8(g) → C2H4(g) + CH4(g)The conversion at equilibrium is negligible at 300 K, but it becomes appreciable at temperatures above 500 K. The pressure is 1 bar. The task is to calculate the equilibrium conversion at 500 K using the Van’t Hoff equation. The reaction is endothermic since it requires energy to break the C–C bond, so the forward reaction is favoured at higher temperatures.

The ΔH° for the reaction can be used to determine the equilibrium constant, which is temperature-dependent. The Van’t Hoff equation relates the equilibrium constant to temperature using the following expression:ln K2/K1 = ΔH°/R (1/T1 - 1/T2)Here, K1 is the equilibrium constant at the lower temperature T1, and K2 is the equilibrium constant at the higher temperature T2.

To know more about equilibrium  visit:-

https://brainly.com/question/30694482

#SPJ11

during the electrolysis of a na2so4 solution with a few drops of phenolphthalein, the solution turns pink around an electrode. this observation indicates that water is being _ at that electrode.

Answers

During the electrolysis of an Na₂SO₄ solution with a few drops of phenolphthalein, the solution turns pink around an electrode. This observation indicates that water is being oxidized at that electrode.

What is electrolysis?

Electrolysis is a technique in which electrical energy is used to drive a non-spontaneous chemical reaction. This process entails the use of direct current to stimulate a chemical reaction in a solution or molten salt, resulting in the decomposition of electrolytes into their constituent elements.

In this question, a Na₂SO₄ solution was used in the process of electrolysis. During this process, a few drops of phenolphthalein was added to the solution. Phenolphthalein is an acid-base indicator that turns pink in the presence of a base. The pink coloration indicates the presence of OH⁻ ions in the solution.

At one of the electrodes, water is being oxidized because it is the source of OH⁻ ions. When the anode receives electrons, it produces oxygen gas and hydrogen ions, resulting in a decrease in the number of OH⁻ ions. This reduces the pH of the solution and causes the pink color to disappear.

Learn more about electrolysis: https://brainly.com/question/32092637

#SPJ11

The phenolphthalein turns pink around the electrode. This happens when the cathode is the electrode responsible for water reduction. The concentration of the hydroxide ions is increased when water is reduced, which is why the pH of the solution increases and the phenolphthalein turns pink.

During the electrolysis of a Na2SO4 solution with a few drops of phenolphthalein, the solution turns pink around an electrode. This observation indicates that water is being reduced at that electrode. The reduction of water at the electrode causes the pH to rise and, as a result, the phenolphthalein indicator turns pink.When an Na2SO4 solution is electrolyzed with two electrodes, the Na2SO4 breaks down into Na+ and SO42- ions in the solution. During the electrolysis of Na2SO4, the water molecules surrounding the positive electrode begin to lose electrons and undergo oxidation. Oxygen gas is generated in the form of bubbles at the anode, which is the positive electrode.At the cathode, or negative electrode, water molecules receive the electrons that were lost at the anode. Hydrogen gas bubbles are generated, and the solution around the cathode is reduced. When the cathode is far from the indicator, the solution remains colorless. When the cathode is close to the indicator, the solution around it becomes pink, indicating that water has been reduced at the cathode.An electrochemical reaction causes the pH of the solution to rise when water is reduced at the cathode. As a result, the phenolphthalein turns pink around the electrode. This happens when the cathode is the electrode responsible for water reduction. The concentration of the hydroxide ions is increased when water is reduced, which is why the pH of the solution increases and the phenolphthalein turns pink.

To know more about phenolphthalein visit:

https://brainly.com/question/30890652

#SPJ11

Identify whether each species functions as a Brønsted-Lowry acid or a Brønsted-Lowry base in this net ionic equation.
a. Acid
b. Base

Answers

A Brønsted-Lowry acid is defined as a substance that donates a hydrogen ion to another substance, while a Brønsted-Lowry base is defined as a substance that accepts a hydrogen ion. Therefore, here is how to identify whether each species functions as a Brønsted-Lowry acid or a Brønsted-Lowry base in a net ionic equation:

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l),

the net ionic equation is

H+(aq) + OH-(aq) → H2O(l).

In this equation, H+ donates a hydrogen ion to OH-, so H+ functions as a Brønsted-Lowry acid, and OH- accepts a hydrogen ion from H+, so OH- functions as a Brønsted-Lowry base

Net ionic equations are chemical equations that show only the species that participate in a chemical reaction. The other species are not included in the equation because they do not take part in the reaction. In the net ionic equation, the species that donate hydrogen ions are identified as Brønsted-Lowry acids and those that accept hydrogen ions are identified as Brønsted-Lowry bases. For example, in the reaction

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l),

the net ionic equation is

H+(aq) + OH-(aq) → H2O(l).

In this equation, H+ donates a hydrogen ion to OH-, so H+ functions as a Brønsted-Lowry acid, and OH- accepts a hydrogen ion from H+, so OH- functions as a Brønsted-Lowry base. Therefore, the answer to the given question cannot be determined without a net ionic equation.

To know more about Brønsted-Lowry acid visit:

https://brainly.com/question/32276007

#SPJ11

When 7.00 g of sulfur are combined with 7.00 g of oxygen, 14.00 g of sulfur dioxide (SO2) are formed. What mass of oxygen would be required to convert 5.00 g of sulfur into sulfur trioxide (SO3)?q

Answers

In the given chemical reaction, 7.00 g of sulfur reacts with 7.00 g of oxygen to produce 14.00 g of sulfur dioxide ([tex]SO_2[/tex]). Approx 5.00 g of oxygen would be required to convert 5.00 g of sulfur into sulfur trioxide [tex](SO_3)[/tex]

To determine the mass of oxygen required to convert 5.00 g of sulfur into sulfur trioxide ([tex]SO_3[/tex]), we can use the concept of the law of conservation of mass. According to this law, the total mass of reactants must be equal to the total mass of products in a chemical reaction.

In the given reaction, the ratio of sulfur to oxygen in sulfur dioxide ([tex]SO_2[/tex]) is 1:1. Therefore, the 7.00 g of sulfur reacts with 7.00 g of oxygen to produce 14.00 g of sulfur dioxide. This means that for every gram of sulfur, one gram of oxygen is required.

Now, we need to find the mass of oxygen needed for 5.00 g of sulfur to form sulfur trioxide ([tex]SO_3[/tex]). Since the ratio of sulfur to oxygen in sulfur trioxide is 1:1.5, we can set up a proportion:

(7.00 g of sulfur) / (7.00 g of oxygen) = (5.00 g of sulfur) / x

Cross-multiplying and solving for x, we find that x = 5.00 g of oxygen.

Therefore, 5.00 g of oxygen would be required to convert 5.00 g of sulfur into sulfur trioxide ([tex]SO_3[/tex]).

Learn more about sulfur dioxide here:

https://brainly.com/question/20635180

#SPJ11

which pair of solutions would be acidic if mixed in equal quantities?

Answers

Few examples of pair of solutions that would be acidic if mixed in equal quantities are, 1-  Hydrochloric acid and acetic acid

                        2-  Sulfuric acid and nitric acid

                        3- Vinegar and lemon juice

To determine which pair of solutions would be acidic when mixed in equal quantities, we need to consider the nature of the individual solutions and their pH values. Acidic solutions have pH values below 7. Here are a few examples of pairs of solutions that would likely result in an acidic mixture when mixed in equal quantities:

1. Hydrochloric acid (pH < 7) and acetic acid (pH < 7): Both of these solutions are acidic in nature, and when mixed in equal quantities, the resulting mixture would likely be acidic.

2. Sulfuric acid (pH < 7) and nitric acid (pH < 7): These are strong acids, and when mixed in equal quantities, the resulting solution would also be acidic.

3. Vinegar (dilute acetic acid, pH < 7) and lemon juice (contains citric acid, pH < 7): Both vinegar and lemon juice are acidic solutions, so when combined in equal quantities, the resulting mixture would likely be acidic.

for more questions on acidic
https://brainly.com/question/25148363
#SPJ8

For each strong acid solutions, determine [H3O+],[OH−], and pH. (So, there should be three answers for each question).

1. 0.22 M HCl

2. 1.8×10−2 M HNO3

3. a solution that is 6.1×10−2 M in HBr and 1.9×10−2 M in HNO3

4. a solution that is 0.755% HNO3 by mass (Assume a density of 1.01 g/mL for the solution.)

Answers

[H₃O⁺], [OH⁻], and pH of 0.22 HCl are 0.22M, 4.55 × 10⁻¹⁴ M, and  0.66 respectively, [H₃O⁺], [OH⁻], and pH of  1.8×10⁻² M HNO₃ are 1.8 × 10⁻² M, 5.56 × 10⁻¹³ M, and 1.74 respectively.

1. Since HCl is a strong acid, it dissociates completely in water to form H₃O⁺ and Cl⁻ ions.

[H₃O⁺] = 0.22 M

[OH⁻] = 1.0 × 10⁻¹⁴ / [H₃O⁺] = 1.0 × 10⁻¹⁴ / 0.22 M = 4.55 × 10⁻¹⁴ M

pH = -log(0.22) = 0.66

pOH = -log(4.55 × 10⁻¹⁴) = 13.34

2. Similar to HCl, HNO₃ is a strong acid and fully dissociates in water.

[H₃O⁺] = 1.8 × 10⁻² M

[OH⁻] = 1.0 × 10⁻¹⁴ / [H₃O⁺] = 1.0 × 10⁻¹⁴ / (1.8 × 10⁻ M) = 5.56 × 10⁻¹³ M

pH = -log(1.8 × 10⁻²) = 1.74

pOH = -log(5.56 × 10⁻¹³) = 12.25

3. Both HBr and HNO₃ are strong acids, so they will dissociate completely.

[H₃O⁺] = 6.1 × 10⁻² M (from HBr)

[OH⁻] = 1.0 × 10⁻¹⁴ / [H₃O⁺] = 1.0 × 10⁻¹⁴ / (6.1 × 10⁻² M) = 1.64 × 10⁻¹³ M

pH = -log(6.1 × 10⁻²) = 1.22

pOH = -log(1.64 × 10⁻¹³) = 12.78

4. Mass of HNO3 = 0.755% of 1.01 g/mL (density) = 0.755 g

Molar mass of HNO3 = 1 + 14 + 3 × 16 = 63 g/mol

Moles of HNO3 = 0.755 g / 63 g/mol = 0.012 moles

Volume of solution = 0.755 g / 1.01 g/mL = 0.748 mL = 0.748 cm³ = 0.748 × 10⁻³ L

[H₃O⁺] = moles of HNO₃ / volume of solution = 0.012 moles / 0.748 × 10⁻³ L = 16.04 M

[OH-] = 1.0 × 10⁻¹⁴/[H₃O⁺]  = 1.0 × 10⁻¹⁴ / 16.04 M ≈ 6.23 × 10⁻¹⁶ M

pH = -log(16.04) ≈ -1.20

pOH = -log(6.23 × 10⁻¹⁶) = 15.20

Learn more about pH, here:

https://brainly.com/question/2288405

#SPJ4

what volume, in milliliters, of 0.190 m naoh should be added to a 0.135 l solution of 0.016 m glycine hydrochloride (p a1=2.350, p a2 = 9.778 ) to adjust the ph to 2.84?

Answers

To adjust the pH of a 0.135 L solution of 0.016 M glycine hydrochloride (pKa1=2.350, pKa2=9.778) to 2.84, approximately 12.15 mL of 0.190 M NaOH should be added.

How much 0.190 M NaOH should be added to the solution to adjust the pH to 2.84?

To determine the amount of 0.190 M NaOH needed to adjust the pH of the glycine hydrochloride solution, we can use the Henderson-Hasselbalch equation.

This equation relates the pH of a solution to the ratio of the concentration of the conjugate base to the concentration of the acid, along with the acid dissociation constant (pKa).

Since the desired pH (2.84) is closer to pKa1 (2.350) than pKa2 (9.778), we can assume that the predominant species in the solution will be the monoprotic form of glycine hydrochloride.

Using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

We can rearrange the equation to solve for the ratio of [A-]/[HA]:

[tex][A-]/[HA] = 10^(^p^H ^- ^p^K^a^)[/tex]

Substituting the values, we get:

[tex][A-]/[HA] = 10^(^2^.^8^4 ^- ^2^.^3^5^0^)[/tex]

Simplifying the calculation, we find [A-]/[HA] ≈ 0.49.

Next, we can calculate the concentration of [A-] by multiplying the volume of the glycine hydrochloride solution by its concentration:

[A-] = (0.135 L * 0.016 M) ≈ 0.00216 M

Now, using the equation for dilution, we can find the volume of 0.190 M NaOH needed to reach a concentration of 0.00216 M [A-]:

0.190 M * VNaOH = 0.00216 M * 0.135 L

Solving for VNaOH, we find VNaOH ≈ 12.15 mL.

Therefore, approximately 12.15 mL of 0.190 M NaOH should be added to the solution to adjust the pH to 2.84.

Learn more about:  Solution

brainly.com/question/1616939

#SPJ11

an atom of which of the following elements has the highest electronegativity? a)k b)as c)ba d)si e)br

Answers

The atom of Bromine (Br) has the highest electronegativity. This means option (e) is correct.

Electronegativity is the power of an atom to attract the shared pair of electrons towards it in a covalent bond. The electronegativity of the elements increases from left to right across the period of the periodic table. As we move from left to right across the period of the periodic table, the nuclear charge increases and the atomic radius decreases, resulting in a higher effective nuclear charge acting on the valence electrons, making them more strongly attracted to the nucleus.

The electronegativity of the elements decreases as we move down the group of the periodic table. This is due to the fact that, as we move down the group, the number of shells in the element increases, shielding the valence electrons from the nucleus' attractive force, resulting in a weaker effective nuclear charge acting on the valence electrons.

To know more about electronegativity visit:

https://brainly.com/question/29597673

#SPJ11

Based on the information in your lab manual, which of the following atoms typically form stable structures that are an exception to the octet rule? Nitrogen Beryllium Xenon Phosphorus Fluorine Oxygen

Answers

Xenon typically forms stable structures that are an exception to the octet rule.

This is because xenon is a noble gas with eight electrons in its valence shell, making it stable and unreactive under normal conditions. The octet rule states that atoms tend to combine in such a way that they have eight electrons in their outermost shell.

This usually involves the sharing, losing, or gaining of electrons to attain a stable electron configuration. There are a few exceptions to the octet rule, particularly among atoms that have more than eight electrons in their valence shells or less than eight electrons.

Therefore, Xenon is one such exception as it has a total of eight electrons in its valence shell without requiring additional sharing or gaining of electrons.

To know more about  octet rule refer here :

https://brainly.com/question/865531

#SPJ11

what is the coefficient in front of s2o32− when the following equation is correctly balanced in basic solution? clo− s2o32− → cl− so42−

Answers

The coefficient in front of S2O32- when the equation is correctly balanced in basic solution is 2.

What is the coefficient in front of S2O32- in the balanced equation in basic solution?

To balance the equation in basic solution, we need to ensure that the number of atoms on both sides of the equation is equal and that the charge is balanced.

The given equation is:

ClO⁻ + S₂O₃²⁻ → Cl⁻ + SO₄²⁻

To balance the equation, we start by balancing the atoms other than hydrogen (H) and oxygen (O). We see that there are 2 chlorine (Cl) atoms on the left side, so we place a coefficient of 2 in front of Cl- on the right side to balance it. Now the equation becomes:

ClO⁻ + S₂O₃²⁻ → 2Cl⁻ + SO₄²⁻

Next, we balance the oxygen atoms. There are 4 oxygen (O) atoms on the right side, so we need 4 oxygen atoms on the left side as well. We achieve this by adding a coefficient of 2 in front of S2O32-. Now the equation becomes:

ClO⁻ + 2S₂O₃²⁻ → 2Cl⁻ + SO₄²⁻

Finally, we balance the hydrogen (H) atoms. There are no hydrogen atoms on the left side, and only 1 hydrogen atom on the right side. To balance it, we add a coefficient of 2 in front of OH- on the left side. The final balanced equation in basic solution is:

ClO⁻ + 2S₂O₃²⁻ + 2OH⁻ → 2Cl⁻ + SO₄²⁻ + H₂O

Therefore, the coefficient in front of S2O32- is 2 in the balanced equation in basic solution.

Learn more about Balancing equations

brainly.com/question/7181548

#SPJ11

Solutions of the [V(OH₂)₆]²⁺ ion are lilac and absorb light of wavelength 806 nm. Calculate the ligand field splitting energy in the complex in units of kilojoules per mole. 1. Δₒ = ____ kJ. mol⁻¹

Answers

The ligand field splitting energy (Δₒ) in the [V(OH₂)₆]²⁺ complex is approximately 1.47 x 10⁴ kJ·mol⁻¹, calculated from the absorbed light wavelength of 806 nm.

To calculate the ligand field splitting energy (Δₒ) in the complex [V(OH₂)₆]²⁺, we need to convert the given wavelength of absorbed light (806 nm) into energy.

The energy of a photon can be calculated using the equation:

[tex]\[E = \frac{hc}{\lambda}\][/tex]

Where:

E is the energy of the photon,

h is Planck's constant (6.626 x 10⁻³⁴ J·s),

c is the speed of light (2.998 x 10⁸ m/s),

and λ is the wavelength of light.

Converting the given wavelength to meters:

806 nm = 806 x 10⁻⁹ m

Calculating the energy:

[tex][E = \frac{6.626 \times 10^{-34} \text{ J s} \times 2.998 \times 10^8 \text{ m/s}}{806 \times 10^{-9} \text{ m}}][/tex]

E ≈ 2.445 x 10⁻¹⁹ J

Now, we can convert the energy from joules to kilojoules and use the Avogadro's constant (6.022 x 10²³ mol⁻¹) to express the ligand field splitting energy in units of kilojoules per mole.

[tex][\Delta_0 = \frac{2.445 \times 10^{-19} \text{ J}}{1000 \text{ J/kJ}} \times 6.022 \times 10^{23} \text{ mol}^{-1}][/tex]

Δₒ ≈ 1.47 x 10⁴ kJ·mol⁻¹

Therefore, the ligand field splitting energy (Δₒ) in the [V(OH₂)₆]²⁺ complex is approximately 1.47 x 10⁴ kJ·mol⁻¹.

To know more about the ligand field splitting energy refer here :

https://brainly.com/question/32296525#

#SPJ11

when nahco3 is heated above 270 °c, it decomposes to na2co3, h2o, and a balanced chemical equation for the decomposition reaction. do not include phases.

Answers

When heated, sodium bicarbonate (NaHCO3) decomposes to produce sodium carbonate (Na2CO3), water (H2O), and carbon dioxide (CO2). The decomposition reaction can be expressed using a balanced chemical equation that shows the reactants and products involved.

2 NaHCO3 → Na2CO3 + H2O + CO2

The above equation represents the thermal decomposition of sodium bicarbonate. The reaction is endothermic, which means that it requires energy to proceed. Heat is required for the reaction to occur, and it is typically supplied by an external source.

In the reaction, sodium bicarbonate (NaHCO3) decomposes into sodium carbonate (Na2CO3), water (H2O), and carbon dioxide (CO2). Carbon dioxide is a gas that is produced during the reaction and can be observed escaping from the reaction mixture as bubbles. Water and sodium carbonate are solid products that remain in the reaction mixture after the reaction is complete.

The balanced chemical equation for the reaction shows that two molecules of sodium bicarbonate decompose to produce one molecule of sodium carbonate, one molecule of water, and one molecule of carbon dioxide.

To know more about Sodium Bicarbonate visit:

https://brainly.com/question/8506770

#SPJ11

ΔS is negative for the reaction ___
[A] Mg(NO3)2(aq)+K2CO3(aq)→MgCO3(s)+2NaNO3(aq)
[B] LiOH(aq)→Li+(aq)+OH−(aq)
[C] C6H12O6(s)→6C(s)+6H2(g)+3O2(g)
[D] 2NH3(g)→N2(g)+3H2(g)
[E] CH3OH(l)→CH3OH(g)

Answers

ΔS is negative for the reaction [D] 2NH3(g) → N2(g) + 3H2(g). The entropy (ΔS) of a substance is the measure of its molecular disorder.

It is a measure of the randomness of the system. The entropy of a substance is greater in a gaseous state than in a liquid or solid state. As a result, when a substance moves from a solid state to a liquid state and then to a gaseous state, its entropy increases.

Therefore, ΔS is negative for the reaction [D] 2NH3(g) → N2(g) + 3H2(g). As the number of gas molecules decreases, the entropy of the system decreases when NH3 is converted to N2 and H2. The remaining options have an increase in entropy. As a result, the answer is [D] 2NH3(g) → N2(g) + 3H2(g).

To know more about molecular visit:

https://brainly.com/question/156574

#SPJ11

according to le châtelier's principle, what would happen if the equilibrium of a weak acid or weak base were upset?

Answers

According to Le Châtelier's principle, the equilibrium of a weak acid or weak base will shift in response to the perturbation and attempt to restore equilibrium.

Le Châtelier's principle predicts how the system will react when any factor that affects the equilibrium of a chemical system is changed. It states that when a system at equilibrium is disturbed by changing any one of the factors, the system will react in such a way as to counteract the disturbance and reestablish equilibrium.

To elaborate, if we upset the equilibrium of a weak acid or weak base by adding more acid, more base, more salt, or changing the temperature, the reaction would move to counteract the change and return to equilibrium. For example, if we add more acid, the reaction will shift to the left to use up some of the added acid, while if we add more base, the reaction will shift to the right to use up some of the added base.

Similarly, if the temperature is increased, the reaction will shift in the direction that absorbs heat, while if the temperature is decreased, the reaction will shift in the direction that releases heat.

Learn more about Le châtelier's principle: https://brainly.com/question/12099569

#SPJ11

The equilibrium of a weak acid or base will be upset if any factor that affects the concentration of one of the species in a reaction mixture is changed. The system will then shift in the direction that will minimize the effect of the imposed change, and re-establish equilibrium.

According to Le Châtelier's principle, if the equilibrium of a weak acid or weak base were upset, it would tend to restore the equilibrium state. Any factor that affects the concentration of one of the species in a reaction mixture at equilibrium will also affect the concentration of the other species. Therefore, the system will shift in the direction that reduces the effect of the imposed change.According to this principle, a system at equilibrium will respond to a stress in a way that will counteract the stress and re-establish equilibrium. A weak acid or base is one that only partially dissociates in water. This means that the acid or base exists in equilibrium with its ions. The extent of ionization depends on the strength of the acid or base and the concentration of the species involved.

To know more about equilibrium visit:

https://brainly.com/question/30694482

#SPJ11

explain why gentle heating is required for the removal of ether.

Answers

Ether is an organic compound that is highly volatile and flammable. Therefore, ether needs to be removed from a mixture through distillation. However, to ensure complete removal of ether, gentle heating is required.

What is ether?Ether is a highly volatile organic compound that is used in a variety of laboratory experiments, pharmaceutical products, and organic synthesis. Ether is used in the laboratory as a solvent for various chemical compounds.Gentle heating for the removal of ether Ether is a volatile organic compound that is highly flammable. Therefore, ether must be removed from a mixture through distillation. Distillation is a method of separating two or more compounds from a mixture based on their boiling points.

During the distillation process, gentle heating is required to ensure the complete removal of ether. The heat causes the ether to vaporize, which can then be separated from the other components of the mixture. Gentle heating is used to prevent the ether from igniting due to its high volatility and flammability. Additionally, if ether is heated too rapidly, it can cause the mixture to boil over, leading to a loss of the sample being distilled.

To know more about flammable visit :

https://brainly.com/question/13357167

#SPJ11

Consider the interconversion shown, which occurs in glycolysis. Fructose 6-phosphate = glucose 6-phosphate The equilibrium constant, Keq, is 1.97 at 25.0 °C. Calculate AG' for the reaction. AG' = -1.679 kJ/mol If the concentration of fructose 6-phosphate is adjusted to 1.5 M and that of glucose 6-phosphate is adjusted to 0.50 M, what is AG? AG= kJ/mol

Answers

The Gibbs free energy change (ΔG) for the reaction can be calculated using the equation ΔG = ΔG' + RTln(Q), where ΔG' is the standard Gibbs free energy change, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.

What is the Gibbs  energy change (ΔG) for the reaction?

In the given reaction, the equilibrium constant (Keq) is 1.97 at 25.0 °C. The standard Gibbs free energy change (ΔG') for the reaction is -1.679 kJ/mol.

To calculate the actual Gibbs free energy change (ΔG) for the reaction when the concentrations are adjusted, we can use the equation ΔG = ΔG' + RTln(Q), where R is the gas constant and T is the temperature in Kelvin.

However, since the values of R and T are not provided, we cannot calculate the exact value of ΔG without these parameters. The value of ΔG would depend on the specific temperature and the gas constant used.

Therefore, without the specific values of R and T, we cannot determine the exact value of ΔG.

learn more about Gibbs free energy change

brainly.com/question/10052725

#SPJ11

During thunderstorms, lightning causes the following chemical change. Which statement BEST describes the role of lightning in the nitrogen cycle?
answer choices
A. the rate of nitrogen precipitation is decreased
B. organic matter is burned and decomposed
C. the process of nitrification is interrupted
D. nitrogen is fixed in the atmosphere

Answers

The statement that best describes the role of lightning in the nitrogen cycle is Nitrogen is fixed in the atmosphere. The correct option is (D).

Nitrogen fixation is the process by which molecular nitrogen (N2) from the atmosphere is converted into ammonia (NH3) or another nitrogenous compound that can be utilized by living organisms. Nitrogen fixation occurs naturally through atmospheric phenomena, biological processes, and human activities. Lightning is one of the natural ways that nitrogen is fixed in the atmosphere.

Lightning adds energy to nitrogen molecules, causing them to react with oxygen, producing nitrogen oxides. The nitrogen oxides dissolve in water to produce nitric acid and nitrate ions. These compounds can then be used by plants to create proteins and other essential organic compounds. Therefore, it is correct to say that during thunderstorms, lightning causes the following chemical change. The role of lightning in the nitrogen cycle is that nitrogen is fixed in the atmosphere.

To know more about ammonia refer to:

https://brainly.com/question/26895415

#SPJ11

is k=2.1×10−20k=2.1×10−20 . what can be said about this reaction?

Answers

The main answer to the question "is k=2.1×10−20. What can be said about this reaction?" is that the given rate constant k=2.1×10−20 indicates that the reaction is very slow.

This is because k is a measure of the reaction rate of a chemical reaction, and the smaller the value of k, the slower the reaction. The explanation for this is given below:The rate constant (k) of a chemical reaction determines how fast or slow a reaction will occur. If the rate constant is high, the reaction will be fast. Conversely, if the rate constant is low, the reaction will be slow.

The value of the rate constant can be determined experimentally for different chemical reactions. k is specific to a particular reaction at a given temperature and pressure. In general, a rate constant value of 10−2 or higher indicates a very fast reaction, while a rate constant value of 10−6 or lower indicates a very slow reaction.In this case, the given rate constant k=2.1×10−20 is extremely small, which indicates that the reaction is very slow.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

From the table of available reagents select the one(s) you would use to convert: 3-pentanol to 2-pentene cyclopentanol to cyclopentylmethanol 3-pentanol to 3-methyl-2-pentanol.

Answers

From the given table of available reagents, the one(s) you would use to convert 3-pentanol to 2-pentene, cyclopentanol to cyclopentylmethanol and 3-pentanol to 3-methyl-2-pentanol are as follows:3-pentanol to 2-pentene: Main answer: Dehydration

Explanation: Dehydration is the removal of water from a substance or molecule. The reaction between an alcohol and a strong acid, such as sulfuric acid, phosphoric acid, or hydrochloric acid, is a method for converting an alcohol to an alkene. In this case, 3-pentanol would be converted to 2-pentene by dehydration.Cyclopentanol to cyclopentylmethanol: Main answer: Reduction Explanation: 

Reduction is a chemical reaction in which electrons are gained by a molecule or an atom. When cyclopentanol is reduced, it converts to cyclopentylmethanol. Lithium aluminum hydride (LiAlH4) can be used as a reducing agent for this reaction. 3-pentanol to 3-methyl-2-pentanol: Main answer: Oxidation Explanation: Oxidation is a chemical reaction in which electrons are lost by a molecule or an atom. When 3-pentanol is oxidized, it converts to 3-methyl-2-pentanol. Jones reagent, which is a solution of chromic acid in dilute sulfuric acid, can be used to oxidize 3-pentanol to 3-methyl-2-pentanol.

To know more about cyclopentyl methanol visit:

https://brainly.com/question/31860652
#SPJ11

balance the following redox reaction in basic solution. Br⁻(aq)+H₂O(I)→Br₂(aq)+H₂(g)

Answers

The balanced redox reaction in basic solution is:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + 2OH⁻(aq) + H₂(g).

To balance the redox reaction in basic solution, we follow these steps:

1. Write the unbalanced equation:

Br⁻(aq) + H₂O(l) → Br₂(aq) + H₂(g)

2. Identify the oxidation states of each element:

Br⁻: -1

H₂O: 0

Br₂: 0

H₂: 0

3. Determine the elements being oxidized and reduced:

In this reaction, Br⁻ is being oxidized to Br₂, while H₂O is being reduced to H₂.

4. Balance the atoms that are undergoing the oxidation and reduction reactions:

Since there are two bromine atoms in Br₂, we need to balance the number of bromine atoms on the left side. To do this, we place a coefficient of 2 in front of Br⁻:

2Br⁻(aq) + H₂O(l) → Br₂(aq) + H₂(g)

Now, the bromine atoms are balanced, but the hydrogen atoms are not.

5. Balance the hydrogen atoms by adding water (H₂O) molecules to the side that needs more hydrogen atoms. In this case, we need 2 hydrogen atoms on the right side, so we add 2 water molecules to the left side:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + H₂(g)

6. Balance the oxygen atoms by adding hydroxide ions (OH⁻) to the side that needs more oxygen atoms. In this case, we need 2 oxygen atoms on the left side, so we add 2 hydroxide ions to the right side:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + 2OH⁻(aq) + H₂(g)

7. Check and balance the charges:

On the left side, the total charge is 2(-1) = -2. On the right side, the total charge is 2(-1) + (-2) = -4. To balance the charges, we add 2 electrons (e⁻) to the left side:

2Br⁻(aq) + 2H₂O(l) + 2e⁻ → Br₂(aq) + 2OH⁻(aq) + H₂(g)

8. Combine the half-reactions and cancel out any common terms:

The balanced half-reactions are:

Reduction: 2H₂O(l) + 2e⁻ → H₂(g) + 2OH⁻(aq)

Oxidation: 2Br⁻(aq) → Br₂(aq) + 2e⁻

Multiplying the reduction half-reaction by 2 and adding the equations gives the balanced overall redox reaction:

2Br⁻(aq) + 2H₂O(l) + 2e⁻ → Br₂(aq) + 2OH⁻(aq) + H₂(g)

Therefore, the balanced redox reaction in basic solution is:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + 2OH⁻(aq) + H₂(g)

To know more about the redox reaction refer here :

https://brainly.com/question/13293425#

#SPJ11

suppose the sample of magnesium used in this lab was contaminated with another metal that does not react with hydrochloric acid. how would this have changed your results?

Answers

If the sample of magnesium used in a lab was contaminated with another metal that doesn't react with hydrochloric acid, then the results obtained in the experiment would be affected.

This is because the data collected during the experiment would reflect the reaction between hydrochloric acid and the contaminated sample instead of pure magnesium. As a result, the following changes in results might have been observed:

1. The mass of the contaminated sample would be higher than the mass of pure magnesium.

2. The rate of reaction between the contaminated sample and hydrochloric acid would be slower than the reaction between pure magnesium and hydrochloric acid.

3. The volume of hydrogen gas collected from the reaction would be lower than the volume of hydrogen gas collected in the reaction between pure magnesium and hydrochloric acid.

learn more about contaminated here

https://brainly.com/question/465199

#SPJ11

Carbon monoxide reacts with oxygen gas to form CO2, as shown by the balanced equation below.
2CO (g) + O2 (g) ----------> 2CO2 (g)
A reaction vessel contains 3.000 g of CO and 3.000 g of O2.
What is the maximum number of moles of CO2 recovered, based on the number of moles of the given reactants?

Answers

According to the given balanced equation, Carbon monoxide reacts with oxygen gas to form CO2 as follows:2CO (g) + O2 (g) → 2CO2 (g) The molecular weight of CO is 28, and the molecular weight of O2 is 32.

To begin with, we need to know how many moles of each reactant we have. The molar masses of CO and O2 are used to determine their number of moles. We have to use the formula: moles = mass/molar mass (1) moles of CO = mass of CO/molar mass of CO(2) moles of O2 = mass of O2/molar mass of O2Molar mass of CO = 12+16 = 28 g/mol Molar mass of O2 = 16*2 = 32 g/mol1) moles of CO = 3.000 g/28 g/mol = 0.1071 mol (2) moles of O2 = 3.000 g/32 g/mol = 0.09375 mol. Now, we will calculate the number of moles of CO2 that can be produced from the given amounts of reactants. We'll use the mole ratio from the balanced chemical equation to do this. According to the balanced chemical equation,2 moles of CO are required for the production of 2 moles of CO2. Therefore, 1 mole of CO reacts to form 1 mole of CO2. Therefore, the number of moles of CO2 that can be produced is equal to the number of moles of CO used in the reaction.

Since both CO and O2 have lesser moles we'll use the value of O2(2) moles of O2 = 0.09375 mol. The number of moles of CO2 formed will be the same as the number of moles of O2, because O2 is the limiting reactant in this case.2 moles of CO2 are formed from 1 mole of O2. Therefore, the number of moles of CO2 produced will be:0.09375 mol O2 × 2 mol CO2/1 mol O2 = 0.1875 mol CO2Therefore, the maximum number of moles of CO2 recovered is 0.1875.

To know more about Carbon monoxide visit:-

https://brainly.com/question/11862648

#SPJ11

what reactants would give the possible aldol condensation product shown?

Answers

Acetaldehyde and benzaldehyde reactants would give the possible aldol condensation product shown. Aldol condensation is a reaction between aldehydes or ketones with α-hydrogen atoms.

The reaction results in an α,β-unsaturated carbonyl compound, aldol product. Aldol condensation is a significant reaction in organic chemistry, which can happen under both acidic and basic conditions. This reaction happens when the alpha carbon of one aldehyde or ketone attacks the carbonyl carbon of another aldehyde or ketone. It's called a condensation reaction because it produces a new molecule and eliminates water as a side product.

Each aldehyde or ketone has a hydrogen atom next to the carbonyl group. During the aldol condensation, an alpha hydrogen from one molecule is removed and an alpha carbon-carbon bond is formed by the nucleophilic addition of the enolate ion to the carbonyl carbon of another molecule of aldehyde or ketone.In this case, the reactants which are Acetaldehyde and benzaldehyde produce the following possible aldol condensation product.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

how does each of the following influence the tensile modulus of a semicrystalline polymer?

Answers

Semicrystalline polymers are polymers in which a crystalline phase is dispersed in an amorphous matrix, resulting in partially ordered structures.

Effect of Crystallinity

A polymer's tensile modulus increases as the degree of crystallinity increases. Tensile modulus is affected by crystallinity, which is influenced by cooling rate, nucleation, and molecular weight.

Effect of Molecular Weight

The tensile modulus of semicrystalline polymers rises as the molecular weight of the polymer increases.

Effect of Processing

The tensile modulus of a semicrystalline polymer is influenced by processing conditions such as temperature, strain rate, and cooling rate. As the rate of deformation increases, so does the modulus.

Here's how each of the following factors affects the tensile modulus of a semicrystalline polymer:

Effect of Crystallinity

A polymer's tensile modulus increases as the degree of crystallinity increases. Tensile modulus is affected by crystallinity, which is influenced by cooling rate, nucleation, and molecular weight. As the degree of crystallinity increases, so does the modulus. Thus, the crystalline domain contributes more to the stiffness of the polymer than the amorphous domain, which has a lower modulus.

Effect of Molecular Weight

The tensile modulus of semicrystalline polymers rises as the molecular weight of the polymer increases. The amorphous areas of a polymer have a lower modulus than the crystalline areas. When the molecular weight of a polymer is increased, the chain becomes longer and more entangled, resulting in increased crystallinity. A higher crystallinity indicates a higher tensile modulus.

Effect of Processing

The tensile modulus of a semicrystalline polymer is influenced by processing conditions such as temperature, strain rate, and cooling rate. As the rate of deformation increases, so does the modulus. When a semicrystalline polymer is quenched from the melt, for example, the degree of crystallinity may be raised, resulting in a higher modulus. The modulus may be decreased if the material is annealed at a temperature above the glass transition temperature or below the melting point.

To know more about Crystallinity visit:

https://brainly.com/question/32203371

#SPJ11

The following influence the tensile modulus of a semicrystalline polymer:

a. Molecular weight: increases

b. Degree of crystallinity: increases

c. Deformation by drawing: increases

d. Annealing of an undeformed material: increases

e. Annealing of a drawn material: decreases

Semicrystalline polymers are polymers that possess both amorphous and crystalline structures. Their behavior is unique, and several variables affect their mechanical properties. Tensile modulus is defined as the slope of the stress-strain curve in the elastic deformation region. It measures the material's resistance to elastic deformation, and it is also known as Young's modulus.

The different variables affect the tensile modulus of a semicrystalline polymer are

a. Molecular Weight: An increase in molecular weight increases the tensile modulus of a semicrystalline polymer. This is because an increase in molecular weight means an increase in the entanglement of the polymer chains, leading to greater resistance to deformation.

b. Degree of Crystallinity: The tensile modulus increases with an increase in the degree of crystallinity. This is because the crystalline regions are highly ordered, leading to more efficient load transfer and hence greater resistance to deformation.

c. Deformation by Drawing: Drawing a semicrystalline polymer under tension aligns the polymer chains in the direction of the draw, leading to an increase in the tensile modulus. The orientation of the chains allows the polymer to resist deformation in the direction of the draw.

d. Annealing of an Undeformed Material: Annealing is the process of heating a material to a specific temperature and then cooling it down slowly to relieve stresses in the material. The tensile modulus increases when an undeformed semicrystalline polymer is annealed because the process causes an increase in the degree of crystallinity, leading to a more ordered and less deformable structure.

e. Annealing of a Drawn Material: When a drawn semicrystalline polymer is annealed, the tensile modulus decreases. This is because annealing reduces the degree of orientation of the polymer chains, which decreases the polymer's resistance to deformation.

Your question is incomplete, but most probably your full question was

How does each of the following influence the tensile modulus of a semicrystalline polymer?

a. Molecular weight

b. Degree of crystallinity

c. Deformation by drawing

d. Annealing of an undeformed material

e. Annealing of a drawn material

Learn more about tensile modulus: https://brainly.com/question/28523412

#SPJ11

76 g SnO2 are used in the following reaction: SnO2 + 2 H2 → Sn + 2 H2O
How many grams of Sn are formed?

Answers

The balanced chemical equation for the reaction of 76 g of SnO2 and 2 H2 can be represented as: SnO2 + 2 H2 → Sn + 2 H2O

To calculate the amount of Sn formed, we need to first find the limiting reactant and the theoretical yield of Sn. The molar mass of SnO2 = 150.71 g/mol. The number of moles of SnO2 present in 76 g of SnO2 can be calculated as: Number of moles of SnO2 = mass / molar mass Number of moles of SnO2 = 76 / 150.71 = 0.504 mol. The molar mass of H2 = 2.02 g/mol

The number of moles of H2 required for the reaction can be calculated as: Number of moles of H2 = 0.504 mol / 2 = 0.252 mol, The molar mass of Sn = 118.71 g/mol, The theoretical yield of Sn can be calculated using the balanced chemical equation:1 mol of SnO2 produces 1 mol of Sn. So, 0.504 mol of SnO2 will produce 0.504 mol of Sn. The mass of Sn can be calculated as: Mass of Sn = number of moles of Sn × molar mass of Sn, Mass of Sn = 0.504 × 118.71 = 59.83 g. Therefore, 59.83 grams of Sn are formed.

To know more about chemical equation refer to:

https://brainly.com/question/11574373

#SPJ11

one hundred gram mole of co at 300°c is burned with 100 gmol oxygen (O²) at 100°c. the exit gases leave at 400 deg c. draw a sketch for the process. Calculate moles in and out for the system. Write an energy balance for the system? Assume steady state. What is the heat transfer to or from the system. You will need to loo k up any data for this problem using either tables or CD in the text book or appendices or other sources (Some interpolation may be needed). (TAs/ Instructor will not provide help for data/information look up at this stage).

Answers

The sketch of the process is attached. The moles in and out of the system is 100 gmol for CO, O₂ and CO₂ and 50 gmol for H₂O. The heat transfer to or from the system is -529.7 kJ.

How to determine the process?

Moles in and out for the system

The moles of CO in the system is 100 gmol. The moles of O₂ in the system is 100 gmol. The moles of CO₂ produced is 100 gmol. The moles of H₂O produced is 50 gmol.

Energy balance for the system

The energy balance for the system is given by the following equation:

Q = ΔH

where:

Q = heat transfer to or from the system

ΔH = enthalpy change of the reaction

The enthalpy change of the reaction can be calculated using the following equation:

ΔH = ΣnΔHf(products) - ΣnΔHf(reactants)

where:

ΔHf = standard enthalpy of formation

n = number of moles

The standard enthalpy of formation of CO₂ is -393.5 kJ/mol. The standard enthalpy of formation of H₂O is -285.8 kJ/mol. The standard enthalpy of formation of CO is -110.5 kJ/mol. The standard enthalpy of formation of O₂ is 0 kJ/mol.

Substituting these values into the enthalpy change equation:

ΔH = (1 mol)(-393.5 kJ/mol) + (2 mol)(-285.8 kJ/mol) - (1 mol)(-110.5 kJ/mol)

ΔH = -529.7 kJ

The heat transfer to or from the system is equal to the enthalpy change of the reaction. Therefore, the heat transfer to or from the system is -529.7 kJ.

Data

The data needed to solve this problem includes:

Standard enthalpy of formation of CO₂: -393.5 kJ/mol

Standard enthalpy of formation of H₂O: -285.8 kJ/mol

Standard enthalpy of formation of CO: -110.5 kJ/mol

Standard enthalpy of formation of O₂: 0 kJ/mol

Find out more on enthalpy change here: https://brainly.com/question/28873088

#SPJ4

A student puts 0.020 mol of methyl methanoate into a previously evacuated rigid 1.0 L vessel at 450 K. The pressure is measured to be 0.74 atm. When the experiment is repeated using 0.020 mol of ethanoic acid instead of methyl methanoate, the measured pressure is lower than 0.74 atm. The lower pressure for ethanoic acid is due to the following reversible reaction. CH₃COOH(g) + CH₃COOH(g) ⇔ (CH₃COOH)₂(g)
(b) Assume that when cquilibrium has been reached. 50. percent of the ethanoic acid molecules have reacted.

Answers

At equilibrium, the pressure is approximately 0.739 atm, which is slightly lower than the initial pressure of 0.74 atm.

How to determine pressure?

In the given equilibrium reaction: CH₃COOH(g) + CH₃COOH(g) ⇔ (CH₃COOH)₂(g)

Assume the initial number of moles of ethanoic acid (CH₃COOH) is n.

Since it is stated that 50% of the ethanoic acid molecules have reacted at equilibrium, it means that half of the initial moles of ethanoic acid have reacted.

The reaction consumes one mole of ethanoic acid to produce one mole of the dimerized product (CH₃COOH)₂. Therefore, at equilibrium, the number of moles of (CH₃COOH)₂ formed is equal to the number of moles of ethanoic acid reacted.

So, the number of moles of (CH₃COOH)₂ formed is 0.5n.

If the initial number of moles of ethanoic acid is 0.020 mol, then at equilibrium, 50% of it will react, leaving 0.010 mol of ethanoic acid unreacted. And since the reaction consumes one mole of ethanoic acid to produce one mole of (CH₃COOH)₂, the number of moles of (CH₃COOH)₂ formed is also 0.010 mol.

Now, the total number of moles present in the system at equilibrium is the sum of the unreacted ethanoic acid and the (CH₃COOH)₂ formed: 0.010 mol + 0.010 mol = 0.020 mol.

Since the volume of the vessel is constant at 1.0 L, we can use the ideal gas law to calculate the pressure:

PV = nRT

P = (nRT) / V

P = (0.020 mol × 0.0821 atm·L/mol·K × 450 K) / 1.0 L

P = 0.7386 atm

Therefore, at equilibrium, the pressure is approximately 0.739 atm, which is slightly lower than the initial pressure of 0.74 atm.

Find out more on ethanoic acid here: https://brainly.com/question/27918265

#SPJ4

You are given Ka of carbonic acid is 4.3×10−7. This means that Carbonic acid is a
(a) good hydrogen-ion acceptor.
(b) good hydrogen-ion donor.
(c) poor hydrogen-ion acceptor.
(d) poor hydrogen-ion donor.

Answers

The correct answer is:

(c) poor hydrogen-ion acceptor.

The given Ka value of carbonic acid (H2CO3) indicates its acidity and the extent to which it donates hydrogen ions (H+).

Ka is the acid dissociation constant, which measures the degree of ionization of an acid in aqueous solution. A higher Ka value indicates a stronger acid, meaning it donates hydrogen ions readily.

In this case, the Ka value of carbonic acid is 4.3×10−7, which is relatively small. This indicates that carbonic acid is a weak acid and donates hydrogen ions to a lesser extent.

Therefore, the correct answer is:

(c) poor hydrogen-ion acceptor.

To know more about hydrogen ion visit:

https://brainly.com/question/3823563

#SPJ11

specify the degree of unsaturation (index of hydrogen deficiency) of the following formulas: (a) c11h12 (b) c13h14 (c) c6h9no3

Answers

(a) [tex]C_{11}H_{12[/tex]: Degree of unsaturation (IHD) = 5.5

(b) [tex]C_1_3H_1_4[/tex]: Degree of unsaturation (IHD) = 6

(c) [tex]C_6H_9NO_3[/tex]: Degree of unsaturation (IHD) = 0.5

Degree of unsaturation

The degree of unsaturation, also known as the index of hydrogen deficiency (IHD), indicates the number of multiple bonds or rings present in a molecule. It can be calculated using the formula:

IHD = (2n + 2 - x)/2

Where n represents the number of carbon atoms and x represents the number of hydrogen atoms in the molecule.

(a)  [tex]C_{11}H_{12[/tex]:

IHD = (2 * 11 + 2 - 12)/2 = 11/2 = 5.5

The degree of unsaturation for  [tex]C_{11}H_{12[/tex]is 5.5.

(b)  [tex]C_1_3H_1_4[/tex]:

IHD = (2 * 13 + 2 - 14)/2 = 12/2 = 6

The degree of unsaturation for  [tex]C_1_3H_1_4[/tex]is 6.

(c)  [tex]C_6H_9NO_3[/tex]:

First, we need to determine the total number of hydrogen atoms in the molecule.

H = 9 + 1 (for each nitrogen) + 3 (for each oxygen) = 9 + 1 + 3 = 13

IHD = (2 * 6 + 2 - 13)/2 = 1/2 = 0.5

The degree of unsaturation for  [tex]C_6H_9NO_3[/tex]is 0.5.

More on degree of unsaturation can be found here: https://brainly.com/question/17513389

#SPJ4

find molarity of 408 ml of solution made with 9.72 g of koh.

Answers

The molarity of the solution is 0.424 M.

To find the molarity of 408 ml of solution made with 9.72 g of KOH, we first need to calculate the number of moles of KOH present in the solution. Molarity is the number of moles of solute per liter of solution. So, Number of moles of KOH = mass / molar mass = 9.72 g / 56.1 g/mol = 0.173 moles.

Now, we can use the formula to calculate the molarity:

Molarity = number of moles / volume of solution (in liters)

= 0.173 moles / 0.408 L

= 0.424 M

Therefore, The molarity of the solution is 0.424 M.

To know more about molarity visit:

https://brainly.com/question/31545539

#SPJ11

Other Questions
A couple are seeking a loan torenovate their home and need to borrow $130,000. The interest ratecharged will be 5% p.a. and require end-of-month repayments over a4-year term. The initial fees that with an increase in the investment demand in the united states, the real interest rate rises. in this situation, the most likely change in the capital stock in the united states and in the international value of the dollar would be which of the following? (capital stock in the us) (international value of the us dollar) with an increase in the investment demand in the united states, the real interest rate rises. in this situation, the most likely change in the capital stock in the united states and in the international value of the dollar would be which of the following? (capital stock in the us) (international value of the us dollar) a. decrease increase b. increase c. no change d. increase increase e. increase decrease f. no change decrease discuss how nurse leaders serve as advocates for their employees What were the achievements of the Space Race in the 1960's? please answer all true and falses asap! thank you so much inadvance1. True or False [EX] a) A blackbody absorbs all radiation falling on it. T b) Principle of complementarity says to use wave and particle theory at the same time T F c) In the photoelectric effect, th The following data show the number of hours it takes in Brazil and Colombia, using one unit of resources, to produce one ton of coffee or one ton of cocoa.Which of the following statements are true.I) Brazil has a comparative advantage in producing coffeeII) Colombia has an absolute advantage in producing coffeeIII) Brazil has an absolute advantage in producing cocoaIV) Colombia has a comparative advantage in producing cocoai only i, ii and iii only i and ii only i and iv only ii only Because many products have various attributes that make them desirable:A) firms would ideally estimate the demand for each attributeB) firms would price each attribute accordinglyC) firms would have to use a demand estimation technique not discussed in the textbookD) A & B onlyE) none of the above find the cosine of the angle between the planes x y z = 0 and x 2y 3z = 6. the balanced chemical equation for this lab is: 3cucl2(aq) 2al(s) 3cu(s) 2alcl3(aq) if 10.5 g copper chloride react with 12.4 g aluminum, what is the limiting reactant? it may be the direction things are headed anyway, he says. "I don't think it's just manage- ment practices that are getting soft."Questions 1. What are some of the potential advantages of providing employees with 2. 3. relatively positive performance appraisals and feedback? What are some of the potential disadvantages of providing employees with positive performance appraisals and feedback?What are some of potential advantages of providing employees with negative feedback? What are some of the potential disadvantages of providing employees with negative feedback? Source: Rachel Feintzelg. "You're Awesome! Firms Scrap Negative Feedback, The Wall Street Journal, February 11, 2015, B1, B5, 4. In an explanatory essay, how is the introductory paragraph similar to the concluding paragraph?a. They both introduce new evidence.b. They both present counterarguments.c. They both summarize the main points.d. They both provide examples. The Development Phase (Phase 3) Of New Product Development Is Concerned With Whether The Product Idea Can Be Translated Into A Technically And Commercially Feasible Product.(a) True or (b)False the euro is question content area bottom part 1 a. the rate at which the french central bank makes discount loans. b. the name of the european central bank. c. the currency of all nations in europe. d. a common currency of many european countries. The lives of individuals with borderline personality disorders are primarily marked by. A. insanity. B. instability. C. impotence. D. insecurity Consider a competitive firm with the following total cost function: TC = $10,000+ $200 + $0.010 where Q is the number of output. A. Calculate the competitive firm's optimal output and profits if prices are stable at $60. (4 marks) B. Calculate the competitive firm's optimal output and profits if prices fall to $30. (2 marks) C. Calculate the firm's long-run equilibrium output and price. A wheel has a 0.10 m radius. Initially rotating at 35 rev/s, the wheel slows down uniformly to 15 rev/s in 3.0s What is the angular acceleration of a point on the wheel? O-6.7 rev/s O-17 rev/s I O-2.0 Comment your opinion about this post.The concepts of social responsiblities are as follows. Jones (2022) Investing in their employees, such as helping employees further their education or expanding their skills. Also by putting customer safety first. Jones (2022) By acting prompty and warn consumers of a defect. Community outreach encourage employee and managers to get more involved with their community. Jones (2022) by encouraging employees the community, either by setting an example or having the company as a whole reach out.The founders went out and found a need before even starting the company. With each purchase of a pair of socks they then give a pair of socks to someone in need via one of over 1200 partners. The company gives a pair to someone in need but at the same time gives the consumer a good feeling for doing something they already needed.The main approaches to social responsiblities have levels ranging. We have Obstructionist who don't behave ethically and often ignore laws. This behavior is hidden from others such as stakeholds and society in general. Jones (2022) a prime example is tabaccoo companies when they tried to hide evidence of cigarettes causing lung cancer. We then have the defensive approach which is more about following the law rather than ethics. They may make little to no ever to act out of ethics. Managers will put their interest before the others. Unlike the others accommodative approach recognizes the importance of social responsiblity. Jones (2022) "Managers adopting this approach want to make choices that are reasonable in the eyes of society and want to do the right thing". Then theres the proactive approach, one the most ethical approaches. They know and recongize the importance of social responsiblity. They often go out of their way to find ways to impove. That is the approach that Bombas has taken. Not only did they open the company after finding the need they spent, (Hollis) they spent years on research which led them to creating a completely different type of sock. One that was way better for those in need. Their entire business structure is on social responsiblity. From giving to the customers feel good feeling for their part.Bombas uses posts to promote their partners and the work they do. (Hollis) By not only connecting to the homeless issue they connect with other society issues such as LGBTQ+. Bring those who want to help all together. They encourage their partners and customers to share the good they have done, either from a purchase or a donation, with their hastag BeeBetter. What is your opinion about e-mail use in the workplace? Shouldcertain e-mails be responded to immediately? What are some of theguidelines corporations could institute to make this easier foremploye the number of moles of ions in 45.0 ml of 4.00 m na2so4 is ________ moles. If the worker's productivity of calculators sold by Sony increase 20%, then the: A supply of labor to Sony decreases B supply of labor to Sony increases C demand for labor to Sony increases D demand for labor to Sony decreases