Answer:
a variable (often denoted by x ) whose variation does not depend on that of another.
Explanation:
What is te commond that alcws moung a fle from one rlase to ancherr?
The command that allows moving a file from one location to another is the "mv command".
The mv command renames or transfers files and folders from one directory to another. A file or directory keeps its base file name when moved to a new directory. All links to other files are preserved when you transfer a file, with the exception of when you move it to a different file system. A directory and its contents are added beneath the existing directory when you transfer a directory into it.
The TargetDirectory option of the mv command allows you to provide a new file name or a new directory path name when renaming a file or directory.
To knwo more about mv command
https://brainly.com/question/30737863
#SPJ11
Definition of Magnetism
Answer:
Magnetism is the force of attraction on a magnetic substance by a magnet.
Explanation:
Please mark as brainliest.
how much energy is needed to raise 70 g of paper 40 degrees celsius?
Explanation: Heat capacity is the amount of heat required to change the temperature of a ... Therefore, specific heat is measured in Joules per g times degree Celsius
Help pls...THANK YOU!!!
Answer:
cell has vast number of constituents in it various scientist proved different theories and discovered different little constituents like mitochondria, DNA etc
the molecular weight of average polypropylene chains with a degree of polymerization of 6500, is: group of answer choices 42 amu/mer 182,000 g/mole 273,000 g/mole 273 amu/chain
the molecular weight of average polypropylene chains with a degree of polymerization of 6500 is 273,000 g/mol.
To calculate the molecular weight of polypropylene chains, we need to know the molecular weight of a single monomer unit (mer) and the degree of polymerization.
Given:
Degree of polymerization = 6500
The molecular weight of a single monomer unit of polypropylene (mer) is approximately 42 g/mol. Therefore, we can calculate the molecular weight of the polymer chains as follows:
Molecular weight of polypropylene chains = Molecular weight of a single monomer unit × Degree of polymerization
Molecular weight of polypropylene chains = 42 g/mol × 6500
Molecular weight of polypropylene chains = 273,000 g/mol
To know more about polypropylene visit:
brainly.com/question/28158007
#SPJ11
Please help me answer this it’s due today. I will give brainliest
Answer: X should represent H, hydrogen.
Explanation:
The H is the only one that hasnt been stated in the left side of the formula. H has three atoms as well.
an unknown metal cylinder was placed in a 100 ml graduated cylinder containing 25. 2 ml of water. the water increased to 48.3 ml. the cylinder weighed 101.356 g. calculate the density of the metal.
The first step is to calculate the volume of the metal cylinder. This can be found by subtracting the final volume of water (48.3 mL) from the initial volume of water (25.2 mL), giving a volume of 23.1 mL. This volume is equivalent to 23.1 cm³ because 1 mL = 1 cm³.
The next step is to calculate the density of the metal. We know the mass of the metal cylinder (101.356 g), so we can divide this by its volume (23.1 cm³): density = mass/volume density = 101.356 g/23.1 cm³density = 4.39 g/cm³. We were given the mass of an unknown metal cylinder as 101.356 g and the initial volume of water as 25.2 mL. Upon immersion of the metal cylinder in the graduated cylinder, the water level rose to 48.3 mL. To determine the density of the metal cylinder, we need to find the volume of the cylinder. We can calculate the volume of the metal cylinder by finding the difference between the final and initial volumes of water. This gives us a volume of 23.1 mL. This volume is equivalent to 23.1 cm³ since 1 mL is equivalent to 1 cm³.To calculate the density of the metal cylinder, we divide the mass of the cylinder by its volume. This gives us a density of 4.39 g/cm³. Therefore, the unknown metal cylinder has a density of 4.39 g/cm³.
The density of the metal cylinder can be found by dividing its mass by its volume. In this case, we were given the mass of the cylinder and the initial and final volumes of water, so we used the difference between these volumes to find the volume of the cylinder. Dividing the mass by the volume gave us a density of 4.39 g/cm³ for the metal cylinder.
To learn more about density click:
brainly.com/question/29775886
#SPJ11
Calculate the pH of a solution formed by mixing 100. 0 mL of 0. 100 M NaF and 100. 0 mL of 0. 060 M HCl. Ka of HF = 7. 24 x 10-4
The given question requires us to calculate the pH of a solution formed by mixing 100.0 mL of 0.100 M NaF and 100.0 mL of 0.060 M HCl. The Ka of HF is given as 7.24 × 10-4. The following is the step-by-step explanation of how to calculate the pH of the given solution.
Mixing 100.0 mL of 0.100 M NaF and 100.0 mL of 0.060 M HCl we get:0.100 M × 100.0 mL = 10.0 mmol NaF0.060 M × 100.0 mL = 6.00 mmol HCl. We need to find the final concentration of NaF and HCl and determine if a buffer is formed or not. Initially, we have: NaF → Na+ + F-HCl → H+ + Cl-Therefore, in the final solution, we have: Na+ + H+ + F- + Cl- → Na+ + Cl- + HF. The final concentration of NaF is given by: Concentration = moles/volume= (10.0 mmol)/(200.0 mL)= 0.050 M. Similarly, the final concentration of HCl can be determined to be 0.030 M.
Consequently, the final concentration of HF is:6.00 mmol – 10.0 mmol = –4.00 mmol The negative value implies that all of the NaF has reacted with the HCl and that there is no NaF left over to react with water. This indicates that there is no buffer formed, and the solution will be acidic. We can write the following equilibrium equation for HF:HF (aq) + H2O (l) ⇌ H3O+ (aq) + F- (aq). The Ka for HF is 7.24 × 10-4.Ka = [H3O+][F-]/[HF]We can assume that [H3O+] ≈ [F-]. Hence, we can write the expression as follows: Ka = [H3O+]2/[HF]= (7.24 × 10-4) = [H3O+]2/(0.050)Therefore,[H3O+] = √(7.24 × 10-4 × 0.050) = 1.08 × 10-3 pH = –log[H3O+]= –log(1.08 × 10-3) = 2.97Hence, the pH of the given solution is 2.97.
To know more about equilibrium equation visit
https://brainly.com/question/32209502
#SPJ11
Daniel is trying to determine if one of Newton’s ideas is a law or a theory. The idea that for every action there is an equal but opposite reaction is a fact, based upon numerous experiments, that has never been revised or changed. The idea is based on observations but is not an explanation of those observations. Daniel should determine that this is a law, because it is a fact that does not change. this is a law, because is based on observations. this is a theory, because it does not explain observations. this is a theory, because it is based on numerous experiments.
true
Explanation:
Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. ... The third law states that for every action (force) in nature there is an equal and opposite reaction.
Answer:
This is a law because it is based on observations (Newton's Third Law)
Explanation:
you have 900 ml of a stock solution of cacl2 that is 3.2 m. calculate and describe how you would make a 1m solution of cacl2?
Answer:
To make a 1 M solution of CaCl2, you need to dilute the stock solution of 3.2 M CaCl2. The equation to use is:
C1V1 = C2V2
where C1 is the concentration of the stock solution (3.2 M), V1 is the volume of the stock solution used, C2 is the concentration of the desired solution (1 M), and V2 is the final volume of the desired solution.
To calculate how much of the stock solution you need to use, you rearrange the equation to get:
V1 = (C2 x V2) / C1
Substituting the values given, we get:
V1 = (1 M x 900 ml) / 3.2 M
V1 = 253.125 ml
Therefore, to make a 1 M solution of CaCl2, you need to measure 253.125 ml of the 3.2 M stock solution and add enough water to make the final volume up to 900 ml.
On Earth a package weighs 19.6 newtons. What is the mass of this package on Earth?
g = 19.6 N/2.2 kg. g = 8.9 m/s2. 7.
The weight an object experience is the product of its mass and gravity. Hence, the package which weighs 19.6 Newtons in earth has a mass of 2 Kg.
What is gravitational force?Gravitational force is a kind of force by which an object attracts other objects into its center of mass. We are all standing on earths surface because of the gravitational pull by earth.
The gravitational force acting on an object depends on its mass and the distance to the object. Therefore, the gravity experienced by each object with different masses or placed at different distances will be different at all.
The weight that's an object have in earth is the product of its mass which is a constant and the acceleration due to gravity that is 9.8 m/s². Thus the object weighing 19.6 has the mass:
mass = 19.6 /9.8
= 2 Kg.
Where one newton is one Kg m/s². Hence, the mass of the package in earth is 2 Kg.
To find more on gravity, refer here:
https://brainly.com/question/4014727
#SPJ2
Physical or Chemical Changes
Gallium melting into its liquid form (at 30°C) is an example of a
Type text here.
change, where some
properties of a material change, but the composition of the material
does not change. Physical changes can be described as reversible or
irreversible, with matter state changes being an example of a(n)
Type text here.
physical change.
Answer: 1. physical 2. Reversible
Gallium melting into its liquid form (at 30°C) is an example of a physical change and they're reversible.
Gallium melting into its liquid form (at 30°C) is an example of a physical change, where some properties of a material change, but the composition of the material does not change. Physical changes can be described as reversible or irreversible, with matter state changes being an example of a reversible physical change.It should be noted that the appearance of a substance only changes in the physical change but the chemical composition doesn't change.In conclusion, chemical changes bring about a change in substance into a substance that's entirely different.
Read related link on:
https://brainly.com/question/19046658
bromine is a liquid at a room temperature. the volume of the sample of bromine is measured in a 50 mL beaker and a 100 mL beaker. how will the two measurements compare?
Answer:
This question is incomplete
Explanation:
This question is incomplete but generally it seem to test the knowledge of accuracy. Accuracy is the closeness of a measured value to the specific or actual value of the substance being measured. Hence, the smaller the entire scale that can contain all the substance being measured, the higher the possibility of accuracy to be achieved. For example, a pen of 10.4 cm in length can be better/accurately measured (length) with a 30 cm meter rule than a 1 m meter rule.
From the question, the 50 mL beaker will provide a "more accurate" measurement of the volume of the bromine than the 100 mL beaker if the 50 mL beaker can contain all the sample of bromine water provided.
Which of the following pairs of elements is/are likely to form an ionic bond? Choose one or more: A. Cl and Br B. Na and F C. ca and Cl D. Hand H E. N and C F. Kand I
The pairs of elements that are likely to form an ionic bond are: B. Na and F (Sodium and Fluorine). C. Ca and Cl (Calcium and Chlorine). F. K and I (Potassium and Iodine)
Ionic bonds occur between elements with a large difference in electronegativity. Electronegativity is the tendency of an atom to attract electrons towards itself in a chemical bond.
In options B, C, and F, the pairs of elements have a significant electronegativity difference, which suggests the likelihood of ionic bonding.
In option B, Sodium (Na) has a low electronegativity, while Fluorine (F) has a high electronegativity. The large difference in electronegativity allows Fluorine to attract the electron from Sodium, forming an ionic bond.
In option C, Calcium (Ca) has a low electronegativity, and Chlorine (Cl) has a higher electronegativity. Again, the significant electronegativity difference leads to the formation of an ionic bond.
In option F, Potassium (K) has a low electronegativity, and Iodine (I) has a higher electronegativity, indicating the potential for an ionic bond.
Ionic bonds are characterized by the transfer of electrons from one element to another, resulting in the formation of charged ions that are attracted to each other.
Therefore, the pairs of elements likely to form an ionic bond are B. Na and F, C. Ca and Cl, and F. K and I.
Learn more about electronegativity here: brainly.com/question/3393418
#SPJ11
determine the number of moles of oxygen in 454.3 g of sodiuum hydrogen phosphate
15.12 is the number of moles of oxygen in 454.3 g of sodium hydrogen phosphate ([tex]NaH{2}PO_{4}[/tex])
To determine the number of moles of oxygen in 454.3 g of sodium hydrogen phosphate ([tex]NaH{2}PO_{4}[/tex]), we need to use the molar mass and the formula of the compound.
The molar mass of [tex]NaH{2}PO_{4}[/tex] can be calculated by adding up the atomic masses of each element in the formula:
Na: 22.99 g/mol
H: 1.01 g/mol (2 hydrogen atoms)
P: 30.97 g/mol
O: 16.00 g/mol (4 oxygen atoms)
Molar mass of [tex]NaH{2}PO_{4}[/tex] = (22.99 g/mol) + (1.01 g/mol × 2) + 30.97 g/mol + (16.00 g/mol × 4) = 120.00 g/mol
Now, we can use the molar mass to calculate the number of moles of [tex]NaH{2}PO_{4}[/tex]:
Number of moles = Mass of substance / Molar mass
Number of moles of [tex]NaH{2}PO_{4}[/tex] = 454.3 g / 120.00 g/mol ≈ 3.78 moles
Since there are four oxygen atoms in one molecule of [tex]NaH{2}PO_{4}[/tex], we can calculate the number of moles of oxygen by multiplying the number of moles of [tex]NaH{2}PO_{4}[/tex] by the ratio of oxygen atoms to [tex]NaH{2}PO_{4}[/tex] molecules:
Number of moles of oxygen = 3.78 moles × 4 = 15.12 moles
Therefore, there are approximately 15.12 moles of oxygen in 454.3 g of sodium hydrogen phosphate.
Know more about atomic masses here:
https://brainly.com/question/30390726
#SPJ8
a 0.1 m aqueous solution of nh4i will be: a 0.1 m aqueous solution of nh4i will be: acidic basic neutral
A 0.1-m aqueous solution of NH4I will be an acidic solution. NH4I is an acidic salt, as it is the result of the reaction between a strong acid (HI) and a weak base (NH3).
This acid-salt mixture is only partially dissociated into its corresponding cations and anions in water. NH4+ is the cation, which is a weak acid, and I- is the anion, which is a strong base.
As a result, NH4+ is more likely to combine with water to create hydronium ions (H3O+), making the solution acidic.As a result, a 0.1-m aqueous solution of NH4I will have a pH of less than 7 and will be an acidic solution.
To learn more about acidic solutions, visit:
https://brainly.com/question/13632841
#SPJ11
Calculate the pH for each of the cases in the titration of 25.0 mL of 0.100 M pyridine, C5H5N(aq) with 0.100 M HBr(aq). The Kb of pyridine is 1.7×10−9.
before addition of any HBr pH=
after addition of 12.5 mL of HBr pH=
after addition of 23.0 mL of HBr pH=
after addition of 25.0 mL of HBr pH=
after addition of 34.0 mL of HBr pH=
Before any HBr is added, the pH is approximately 5.23. After the addition of HBr, the pH becomes 1.00, which remains constant throughout subsequent additions of HBr.
To calculate the pH at different stages of the titration between pyridine (C5H5N) and HBr, we need to consider the reaction between the weak base pyridine and the strong acid HBr. Pyridine acts as a base and accepts a proton (H+) from HBr, forming the conjugate acid of pyridine (C5H5NH+).
Before any HBr is added:
Since pyridine is a weak base, we can consider the initial solution as a basic solution. The pH can be calculated using the pKb of pyridine:
pKb = -log(Kb) = -log(1.7×10^(-9)) ≈ 8.77
pH = 14 - pKb ≈ 14 - 8.77 ≈ 5.23
After addition of 12.5 mL of HBr:
The volume of the solution has increased to 25.0 mL + 12.5 mL = 37.5 mL. We can assume that the HBr completely reacts with pyridine, forming its conjugate acid. Since HBr is a strong acid, we can consider the solution as acidic.
pH = -log[H+] = -log(0.100 M) = 1.00
After addition of 23.0 mL of HBr:
The volume of the solution is now 25.0 mL + 23.0 mL = 48.0 mL. Again, we assume complete reaction of HBr with pyridine.
pH = -log[H+] = -log(0.100 M) = 1.00
After addition of 25.0 mL of HBr:
The volume of the solution is now 25.0 mL + 25.0 mL = 50.0 mL. Complete reaction of HBr with pyridine is assumed.
pH = -log[H+] = -log(0.100 M) = 1.00
After addition of 34.0 mL of HBr:
The volume of the solution is now 25.0 mL + 34.0 mL = 59.0 mL. Complete reaction of HBr with pyridine is assumed.
pH = -log[H+] = -log(0.100 M) = 1.00
In summary:
- Before any HBr is added: pH ≈ 5.23
- After addition of 12.5 mL of HBr: pH = 1.00
- After addition of 23.0 mL of HBr: pH = 1.00
- After addition of 25.0 mL of HBr: pH = 1.00
- After addition of 34.0 mL of HBr: pH = 1.00
To learn more about Pyridine click here: brainly.com/question/32565523
#SPJ11
How many stars are in the constellation Andromeda?
hellllp i give brainlyst!
Answer:
13 if Im right?
Explanation:
to what volume should you dilute 0.400 l of a 13.0 mnaoh solution to obtain a 3.00 mnaoh solution? express your answer with the appropriate units.
We can use the M1V1 = M2V2 equation to calculate the volume required to dilute 0.400 L of a 13.0 M NaOH solution to obtain a 3.00 M NaOH solution.M1V1 = M2V2 equation,M1V1 = M2V2V1 = (M2 × V2)/M1
In this scenario:M1 = 13.0 M, V1 = 0.400 L, M2 = 3.00 M. We can put these values into the M1V1 = M2V2 equation and solve for
V2:V2 = (M1 × V1)/M2V2 = (13.0 M × 0.400 L)/3.00 MV2 = 1.73 L
To determine the volume required to dilute 0.400 L of a 13.0 M NaOH solution to a 3.00 M NaOH solution, we can use the M1V1 = M2V2 equation. The formula tells us that the initial concentration and volume, as well as the final concentration and volume, are proportional.If we look at the equation, we can observe that the final volume (V2) is proportional to the initial volume (V1) and the ratio of the initial and final concentrations (M1/M2). We substitute the values given in the problem into the equation and solve for V2:V2 = (M1 × V1)/M2V2 = (13.0 M × 0.400 L)/3.00 MV2 = 1.73 L Therefore, to dilute 0.400 L of a 13.0 M NaOH solution to a 3.00 M NaOH solution, 1.73 L of water must be added to the solution.
We can conclude that to prepare a 3.00 M NaOH solution from a 13.0 M NaOH solution, 1.73 L of water should be added to 0.400 L of 13.0 M NaOH solution.
To learn more about final concentration visit:
brainly.com/question/28973308
#SPJ11
how many moles of fe are produced when 1.8 moles of fe2o3 react with co
When 1.8 moles of Fe₂O₃ react with CO, it will produce 3.6 moles of Fe.
The balanced chemical equation for the reaction between Fe₂O₃ and CO is:
Fe₂O₂ + 3CO → 2Fe + 3CO₂
From the balanced equation, we can see that 1 mole of Fe₂O₃ reacts with 3 moles of CO to produce 2 moles of Fe.
Therefore, if 1.8 moles of Fe₂O₃ react, we can determine the number of moles of Fe produced by setting up a ratio:
(1.8 moles Fe₂O₃) x (2 moles Fe / 1 mole Fe₂O₃) = 3.6 moles of Fe
Hence, when 1.8 moles of Fe₂O₃ react with CO, it will produce 3.6 moles of Fe.
To learn more about moles visit:
brainly.com/question/14485544
Find the distance between these points.
W(-6, -8), X(6, 8)
Distance =
[tex] \sqrt{ {(6 + 6)}^{2} + {(8 + 8)}^{2} } = \sqrt{144 + 256} = \sqrt{400} = 20[/tex]
In the electrolysis of molten mixture of NaCl and CaBr2, what is the product that forms at the anode and the cathode?
At the anode, chlorine gas (Cl2) is formed, while at the cathode, sodium metal (Na) is formed in the electrolysis of a molten mixture of NaCl and CaBr2.
In the electrolysis of a molten mixture of NaCl and CaBr2, the products formed at the anode and cathode depend on the individual reactions occurring at each electrode. At the anode, chloride ions (Cl-) from NaCl and bromide ions (Br-) from CaBr2 are discharged. Chloride ions are more easily oxidized than bromide ions, so they tend to be preferentially discharged. At the anode, chloride ions lose electrons and form chlorine gas (Cl2). This reaction is represented as: 2Cl- (aq) → Cl2 (g) + 2e-
At the cathode, sodium ions (Na+) from NaCl and calcium ions (Ca2+) from CaBr2 are discharged. Sodium ions are more easily reduced than calcium ions, so they are preferentially discharged. At the cathode, sodium ions gain electrons and form sodium metal (Na). This reaction is represented as: 2Na+ (aq) + 2e- → 2Na (l)
Calcium ions (Ca2+) from CaBr2 are not reduced at the cathode due to their higher reduction potential compared to sodium ions.
To learn more about electrolysis click here:
brainly.com/question/12994141
#SPJ11
regarding the use of the ammonia/ammonium chloride buffer in this experiment, why is it important to add enough buffer (to reach ph 10)?
In the experiment, the use of the ammonia/ammonium chloride buffer is crucial. It is important to add enough buffer to reach pH 10 because the buffer will stabilize the pH of the solution.
In this experiment, the ammonia/ammonium chloride buffer is utilized to maintain the pH level of the solution when a base, such as NaOH, is added. The buffer is able to do this because it contains both a weak acid (ammonium ion, NH4+) and its conjugate base (ammonia, NH3).
When a base is added to the solution, it will react with the ammonium ions present in the buffer to produce ammonia, which will then react with any excess base added. By doing so, the buffer can help keep the pH of the solution from becoming too basic. When the pH is too low, the solution can become too acidic, which can have a negative impact on the results of the experiment. Conversely, if the pH is too high, the solution can become too basic, which can also impact the experiment's results. Thus, it is important to add enough ammonia or ammonium chloride buffer to maintain a pH of 10 throughout the experiment.
To know more about weak acid, visit:
https://brainly.com/question/32730049
#SPJ11
Are the eight valence electrons the most stable configuration?
Answer: No, the noble gases are
Explanation:
Answer:
The most stable electron configuration is that of a noble gas, due to the fact that its valence shell is filled. For helium, that means two valence electrons (a duet) in the 1s sublevel, and for the rest it means eight valence electrons (an octet) in the outermost s and p sublevels.
What best explains why sodium is more likely to react with another element than an element such as neon
Answer: Neon is not reactive (full valence shell)
Explanation:
Neon is a noble gas and has a stable structure (8 valence electrons) -therefore, is not very reactive.
What happens to how much space the water fills when it changes into water vapor?
A.
the water vapor fills less space
B.
the water vapor fills more space
C.
the water vapor fills the same space
D.
the water vapor does not fill any space
Answer:
regr vldfpelrg
Explanation:
Answer:
i think A is the answer (the water vapor fills less space)
eparate the pennies you have into two groups: one group with pennies dated before 1982 and the other with pennies dated after 1982. Compare the two groups. Record any similarities or differences in size or appearance that you notice between the two groups.
The comparison between the two groups of pennies reveals distinct differences in their composition, appearance, and weight.
Upon separating the pennies into two groups based on their dates, I observed notable differences between the two groups. Pennies dated before 1982 are primarily composed of copper, while those dated after 1982 are made of zinc with a thin copper plating.
In terms of appearance, the pre-1982 pennies have a reddish-brown color due to their high copper content. They often show signs of aging, such as discoloration, tarnish, and wear. In contrast, the post-1982 pennies have a brighter and shinier appearance, resembling a silver-like hue due to the copper coating.
In terms of size, both groups of pennies have the same diameter and thickness. However, the pre-1982 pennies tend to be slightly heavier due to the higher density of copper compared to zinc, which is used in post-1982 pennies.
Pennies dated before 1982 are made of copper, have a reddish-brown color, and are slightly heavier. Pennies dated after 1982, on the other hand, are made of zinc with a copper coating, appear brighter and more silver-like, and are slightly lighter.
These differences arose from the change in materials used by the U.S. Mint in 1982 to reduce production costs.
For more such question on composition. visit :
https://brainly.com/question/26632540
#SPJ8
How many molecules of CO2 are contained in a 5.00 L tank at 7.53 atm and 485 K? a. 9.45 x 10^23 molecules b. 4.16 x 10^24 molecules c. 5.69 x 10^23 molecules d. None of the above e. 2.45 x 10^24 molecules
The number of molecules of CO2 contained in a 5.00 L tank at 7.53 atm and 485 K can be calculated using the ideal gas law and Avogadro's number. The correct answer is option e, which is 2.45 x 10^24 molecules.
To determine the number of CO2 molecules in the tank, we can use the ideal gas law equation:
PV = nRT
Where:
P = Pressure in atmospheres (7.53 atm)
V = Volume in liters (5.00 L)
n = Number of moles of gas (to be determined)
R = Ideal gas constant (0.0821 L·atm/(mol·K))
T = Temperature in Kelvin (485 K)
Rearranging the equation to solve for n:
n = PV / RT
Substituting the given values:
n = (7.53 atm) * (5.00 L) / (0.0821 L·atm/(mol·K) * 485 K)
n = 0.1848 mol
Now, to convert moles to molecules, we can use Avogadro's number, which states that 1 mole of a substance contains 6.022 x 10^23 molecules.
Number of molecules = (0.1848 mol) * (6.022 x 10^23 molecules/mol)
Number of molecules = 1.112 x 10^23 molecules
Therefore, the correct answer is option e, which is 2.45 x 10^24 molecules.
To learn more about ideal gas law click here: brainly.com/question/30458409
#SPJ11
write a balanced reaction equation for the dehydration of cyclohexanol
Dehydration is the process of eliminating water from the given compound. When cyclohexanol dehydrates, it forms cyclohexene as written here:
C₆H₁₁OH ⇒[tex]C_6H_{10} + H_2O\\[/tex]
What is cyclohexanol?
Cyclohexanol is an alcohol formed from the cyclic alkane cyclohexane and water or other hydroxyl groups. The chemical formula of this compound is
C₆H₁₁OH.
To find more on dehydration, refer here:
brainly.com/question/12261974
5. A beaker is filled with water and has an initial volume of 100 ml. After an object is placed into
the beaker, the volume of the beak measures 150 ml. If the mass of the object is 200 grams,
what is the density of the object?
Answer:
4
Explanation:
Mass divided by Volume = Density
The objects mass is 200 grams and the volume of the water displaced is 50
So 200 divided by 50 equals 4
