What are the advantages of oxygen cycle?.

the net redox reaction that occurs when ni comes into contact with h2so4 is 0.43V

What is redox reaction?

Any chemical reaction in which the oxidation number of a participating chemical species changes is referred to as an oxidation-reduction reaction. The chemical reactions in which oxidation and reduction takes place are called redox reaction. The phrase refers to a wide range of processes.

Here,

[tex]Ni + SO_{2} ^{-4} + 4H^{+}[/tex]  →   [tex]Ni^{2+} + H_{2}SO_{3} + H_{2}O[/tex]

E°cell = E°[tex]_{cathode\\[/tex] -  E°[tex]_{anode\\[/tex]

E°cell = [ +0.20-(-0.23)] V

E°cell = (0.20 + 0.23)

E°cell = 0.43V

the net redox reaction that occurs when ni comes into contact with h2so4 is 0.43V

To know more about redox reaction, check out:

https://brainly.com/question/21851295

#SPJ4

Quantitative information would reflect the water potential by the change in percent in glucose and would include the final and initial cent amounts of the glucose.

Because the body doesn't produce enough insulin, mellitus (high blood glucose) occurs when there is an excess of sugar in the blood. Hyperglycemia, a sign of diabetes, can lead to vomiting, intense hunger and thirst, a rapid heartbeat, eyesight issues, and other symptoms. Untreated hyperglycemia may lead to serious health problems.

Sweet corn, honey, agave, molasses, pumpkin seeds, fruits, and fruit juices are a few examples of foods that are naturally abundant in pure glucose. These foods, especially fresh fruits, are nutritious when used in moderation as part of a balanced diet. Curries, foods, pies, and sweetened drinks are some examples of foods that frequently have had a significant amount of added glucose.

To know more about glucose visit :

https://brainly.com/question/2396657

#SPJ4

The final temperature of the mixture will be 30⁰C

Since it is given that 50 gms of water at 20 ⁰ C and 50 gms of water at 40⁰ C are mixed.  Since the masses of the liquid at different temperatures are the same, the answer is very easy and simple:  average of 20⁰C and 40⁰C.  that is 30⁰C.

the final temperature of the mixture =

    = [ m1 * T1 + m2 * T2 ] / (m1 + m2)

    = [ 50 gms * 20⁰ C + 50 gms * 40⁰C ]  / (50+50)

    = 3,000 / 100 = 30⁰C

In chemistry, we define the temperature of a substance as the average kinetic power of all of the atoms or molecules of that substance. No longer do all of the debris of a substance have identical kinetic strength. At any given time, the kinetic energy of the debris may be represented by means of a distribution.

Temperature performs a vital function in-hospital treatment (both humans and animals), food, beverages, and agriculture. Our average fitness is regularly reliant upon the temperature in lots of methods as nicely.

The SI unit of temperature as consistent with the global system of devices is Kelvin.

Learn more about Temperature here:-https://brainly.com/question/2339046

#SPJ4

The answer is paper chromatography using different solvents with a range of polarities as the mobile phase.

Paper chromatography- Low-molecular-mass molecules can be separated using paper chromatography based on how evenly they are distributed in the stationary and mobile phases. Paper chromatography is regarded as a potent analytical technique because of its low cost and the availability of numerous procedures for the separation of chemicals.

A small amount of a sample solution is poured onto a strip of chromatography paper in a paper chromatography experiment. After that, a solvent is used to suspend the chromatography paper. The sample solution's constituent components split out into bands of distinct hue as the solvent goes up the paper.

The speed of the chromatography process is influenced by the solvent's polarity. Therefore, we may conclude that all of the other components in the mixture move more quickly during the chromatography experiment if the solvent's polarity is increased.

Thus, answer is paper chromatography using different solvents with a range of polarities as the mobile phase.

To learn more about paper chromatography refer- https://brainly.com/question/1394204

#SPJ4

glasses usually take minutes to dry and cool for the glasses exposed to air.

In normal ambient air conditions, pint glasses can take up to 40 minutes to dry and cool. The Glass-increased Dry's air circulation reduces drying time to around 4 minutes, allowing for a much faster turnaround of glasses. While it's difficult to generalize how long it will take your laundry to air-dry—fabric type, air temperature, and the presence or absence of wind all play a role—on a pleasantly warm day with a light breeze, expect it to take two to four hours for most types of fabric.

Learn more about glasses here:

https://brainly.com/question/14620594

#SPJ4

Oscar Ramirez’s job has been redesigned. He has more authority and responsibility and feels the job now is very challenging to him. The company has used job enrichment to challenge Ramirez. The correct option is C.

Job enrichment is a strategy for motivating employees by increasing their responsibility and variety in their jobs. The goal is to give employees more control over their work. By doing so, one can tap into their natural desire to do a good job while also contributing to the company's overall goals.

Job enrichment is a process that involves adding dimensions to existing jobs in order to make them more motivating. Job enrichment can include adding extra tasks (also known as job enlargement), increasing skill variety, giving jobs meaning, creating autonomy, and providing feedback.

Oscar Ramirez's position has been restructured. He now has more authority and responsibility, and he considers his job to be extremely difficult. Ramirez has been challenged by the company through job enrichment.

In conclusion, the correct option is C.

Learn more about job on:

https://brainly.com/question/14834772

#SPJ1

The task assigned to Oscar Ramirez has changed. He feels the job is now highly hard to him because he has more authority and responsibility. Ramirez has been put to the test by the firm using job enrichment.

An approach for employee motivation called job enrichment involves giving workers more responsibility and variety in their work. Giving workers more authority over their work is the aim. By doing this, one can fulfill their innate desire to perform well while simultaneously advancing the objectives of the firm as a whole.

Job enrichment is the process of giving existing occupations new components to make them more interesting and compelling. Jobs can be made more fulfilling by introducing new tasks (a process known as "job enlargement"), diversifying one's skill set, generating autonomy, and receiving feedback.

The role of Oscar Ramirez has changed. He now has greater power and accountability, and he finds his work to be quite challenging. Through job enrichment, the corporation has pushed Ramirez.

To learn more about job, visit

brainly.com/question/14834772

#SPJ4

To avoid spectra dominated by the solvent, most HNMR Spector are recorded in deuterated Solvent.

CHCL3 is replaced by CDCL3

H2O is replaced by D20

So,CHCL3 is inappropriate solvent for NMR

Chloroform, dimethyl sulfoxide, heavy water, and other deuterium solvents are often employed in NMR analysis. A substantial solvent signal that would normally appear in the proton NMR spectrum has been suppressed by using expensive deuterated solvents, which also makes locking and shimming easier. Deuterated Solvents are used in Nuclear Magnetic Resonance Spectroscopy for three major reasons: A: To prevent being swamped by the solvent signal. The 1H-NMR spectra of a typical proton-containing solvent exhibits a massive solvent absorption that dominates the spectrum and obstructs the peaks of interest proton. To prevent the overlapping of the big solvent peaks with the signal of the analytes, NMR samples are dissolved in deuterated solvents.

Learn more about deuterated Solvent here:

https://brainly.com/question/15228046

#SPJ4

The reactions is expected to produce 1-propanol , CH₃CH₂CH₂OH at a faster rate is :

CH₃CH₂CH₂Cl  +  NaOH / DMSO --->  CH₃CH₂CH₂OH

The reaction is which expected to produce the propanol at a faster rate is given as the follows :

CH₃CH₂CH₂Cl  +  NaOH / DMSO --->  CH₃CH₂CH₂OH

Because the DMSO is a polar aprotic solvent.  DMSO is dimethyl sulfoxide is a polar aprotic solvent that will dissolves the both the polar  compounds and the non polar compounds.

Thus, the reaction of the propanol at a faster rate is recation of 1- chloro propane in DMSO because it is polar  aprotic solvent.

To learn more about propanol here

https://brainly.com/question/9345701

#SPJ4

( 5.6 g / kg ) ( 1.03 kg / L ) ( 1 mol / 58.44 g ) = 0.0987 mol NaCl / L

Its density is the amount of "stuff" that can be packed into a given amount of space. For instance, a slab of both the softer element lead (Pb) and the harder, denser component gold (Au) will simply be denser (Au). Bricks are more dense than Styrofoam blocks. Its definition is bulk per unit of volume.

Density is an important concept because it allows us to forecast which compounds will fly and those that will sink in a liquid. An object will frequently float as long as its density is less than that of the liquid.

To know more about density visit:

https://brainly.com/question/15164682

#SPJ4

The answer to the question is that radioactive substance has the formula w. The radioactive sample weighs 12.8 g after 40 minutes. A radioactive substance decays continuously.

What type of radioactive is present in human body?

The following natural radionuclides are the most significant ones present in the human body: 238 U, 234 U, 232 Th, 210 Po, 210 Pb, 40 K, 226 Ra, 228 Ra, 14 C, 7 Be, and 22 Na, the last three of which are cosmogenic in origin.

What is the main radiation source in your house?

If radon gas is allowed to build up in a home, it can be harmful to homeowners in addition to uranium miners. It exposes them to the most natural radiation, on average

Briefing:

The mass of the sample can be found by using the exponential decay equation

N(t): is the amount of the sample at time t =?

N₀: is the initial quantity of the sample = 120 g

t = 40 min

λ: is the decay constant =  0.056 min⁻¹

Hence, the mass of the sample after 40 min is:

Therefore, the mass of the radioactive sample after 40 minutes is 12.8 g.

To know more about radioactive visit:

https://brainly.com/question/1770619

#SPJ4

The total number of electron pairs shared between the two atoms in an o2 molecule are two.

The O2 Lewis structure has a double bond between two oxygen atoms. According to the octet rule, oxygen atoms need to bond twice.  The O2 molecule is a diatomic, meaning that two atoms of the same element are connected in a pair. The two bonds appear as the two parallel lines between the O atoms. This is called a double bond. Each bond is a pair of electrons, one from each connected O atom. So the double bond, the two parallel lines, represents a total of 4 electrons.

Each O is surrounded is by four dots and two sticks or lines, representing another 4 electrons in the O2 double bond. So each O is surrounded by 8 total valence electrons, giving it an octet also and making it stable.

The two letter O’s in the O2 Lewis structure represent the nuclei or the centers of the oxygen atoms.

To know more about  electron pairs

https://brainly.com/question/13959301

#SPJ4

The ions that will be definitely absent will be Ag⁺, Pb²⁺, Hg₂²⁺, Mg²⁺, Ca²⁺, possibly present will be Cu²⁺, Hg²⁺, Sb³⁺, Al³⁺, Fe²⁺, Mn²⁺, Li⁺ and no ion will be definitely present.

Ions are atoms having a positive or negative charge on them. They are of two types namely cations and anions. Positively charged ions are called cations and negatively charged ions are called anions. When metal cations react with dilute HCl, then respective metal chloride is formed and hydrogen gas is released. Next when HCl reacts with Sulphur, Hydrogen sulfide or (H₂S) is formed . It is insoluble in water. Now, the H₂S is bubbled and the precipitate is obtained which is further treated with sodium carbonate or (Na₂CO₃) solution and no precipitate is formed after the reaction. The reactions involved are attached with the figure.

Learn more about Ions at:

brainly.com/question/13692734

#SPJ4

The product is MgF₂ and Be. In the formula BeF₂ + Mg => MgF₂ + Be, the products are MgF₂ and Be (on the right). This is a single displacement reaction.

Single displacement reaction is defined as a reaction in which a highly reactive element displaces a less reactive element from its chemical reaction.

There may be more or less reactants and products on each side separated by a plus sign +. Reactants are on the left and products are on the right.

In the formula BeF₂ + Mg => MgF₂ + Be, the products are MgF₂ (on the right) and Be.

All elements that appear on the left must also appear on the right, because the sum of reactants equals the sum of products. In the question on the left, the elements 'Be', 'F' and 'Mg' were displayed. The "Be" on the right was missing, so it must be a missing item.

This is a single replacement reaction because the element that was paired was replaced by another element.

All single shift reactions look like this:

AB + C = AC + B A paired element has been replaced by another unpaired element.

In this reaction, 'Be' was replaced. It was paired with 'F' to initiate the reaction, but was replaced by 'Mg'.

learn more about single displacement reaction at https://brainly.com/question/29307794

#SPJ4

The total vapor pressure of the given solution of toluene and benzene has been 131.004 mm Hg.

What is Dalton's Law of vapour pressure?

According to Dalton's Law, a component's partial vapor pressure is determined by its mole fraction in the gas mixture and is equal to the total pressure times that component's pressure.

From Dalton's law of vapor pressure:

Total Vapor pressure = mole fraction of A \times× Vapor pressure of a + mole fraction of B \times× Vapor pressure of B.

Given, the mole fraction of Benzene = 0.580.

The sum of mole fractions in a solution has been 1.

1 = mole fraction of bemzene + mole fraction of toluene

1 = 0.580 + mole fraction of toluene

Mole fraction of toluene = 1 - 0.580

Mole fraction of toluene = 0.420

Total pressure = (0.580 \times× 183) + (0.420 \times× 59.2) mm Hg

Total pressure = 106.14 + 24.864 mm Hg

Total vapor pressure = 131.004 mm Hg.

Therefore, The total vapor pressure of the given solution of toluene and benzene has been 131.004 mm Hg.

To learn more about  Dalton's law of vapor pressure

Here: https://brainly.com/question/14119417

#SPJ4

MLA citation styles are used by students and researchers in humanities fields such as languages,  literature, and philosophy.

MLA Style sets up standards of composed communication concerning such formatting and page layout, applying elaborate details examples like abbreviations, quotations, and footnotes, then citing sources and preparing a manuscript for distribution in certain disciplines.MLA Style is the second most utilized quotation style after APA. It is typically saved for writers and students planning manuscripts in different humanities disciplines such as Language and Literature, Foreign Languages and Literature, and Literary Criticism. Using MLA Fashion legitimately makes it easier for readers to explore and comprehend a text through recognizable cues that allude to sources and borrowed data.

To know more about  MLA citation style refer to the link               brainly.com/question/868766

#SPJ4

Answer:

As Lithium is the 3rd element in the periodic table and it's atomic number is 3.It loses 1 electron to complete duplet state.

3.024 M is really the mole fraction of such ammonia if 18. 1 ml of a 0. 800 hcl solution were required for neutralise 5. 00 ml of just a home ammonia solution.

Concentrations exceeding 5,000 ppm typically result in fast oxygen deprivation, while levels between 2500 and 4500 pm can be lethal in about 30 minutes. Tissue injury can be induced by anhydrous ammonia at concentrations higher than 10,000 parts per million. High levels of ammonia with in air can cause rapid eye, nose, throat, and respiratory tract burning as well as blindness, lung damage, or even death.

According to the neutralization, the number the millimoles of acid (HCl) or the amount of millimoles of base were equal (ammonia).

(MV)HCl = (MV)ammonia

M of HCl equals 0.80 M and V of HCl equals 18.9 mL

M of ammonia = ?  

Ammonia M & V = 5.0 mL

∴ M of ammonia = (MV)HCl / V of ammonia = (0.80 M)(18.9 mL) / (5.0 mL

= 3.024 M.

To know more about ammonia visit:

brainly.com/question/15409518

#SPJ4

One valence electron is lost by Lithium

Unattached or attached to an atom, an electron is a negatively charged subatomic particle. One of the three main types of particles within an atom is an electron that is bound to it. The other two are protons and neutrons.

Learn more about Electron here:

https://brainly.com/question/860094

#SPJ4

83.9 grams of KCl are needed to prepare 0.750 L of a 1.50 M solution in water.

KCl is the chemical formula of potassium chloride.

Given that,

Amount of moles of KCl (n) = ?

Volume of KCl solution (v) = 0.75L

Concentration of KCl solution (c) = 1.5M

Since concentration (c) is obtained by dividing the amount of solute dissolved by the volume of solvent, hence

c = n / v

make n the subject formula

n = c x v

n = 1.5M x 0.75L

n = 1.125 mole

Now given that,

Amount of moles of KCl (n) = 1.125

Mass of KCl in grams = ?

For molar mass of KCl, use the molar masses of:

Potassium, K = 39g;

Chlorine,Cl = 35.5g

KCl = (39g + 35.5g)

= 74.5g/mol

Since, amount of moles = mass in grams / molar mass

1.125 mole = m / 74.5g/mol

m = 1.125 mole x 74.5g/mole = 83.81g

Thus, 83.9 grams of KCl are needed to prepare 0.750 L of a 1.50 M solution in water

To know more about solvent click here:

https://brainly.com/question/13133789

#SPJ4

The reaction rate order for sn1 reaction rate will be CH3F < CH3Cl < CH3I. The reason for this is that the halide with the weaker nucleophile will have a higher sn1 reaction rate.

The nucleophile is a key factor in determining the rate of an Sn1 reaction. In general, the stronger the nucleophile, the faster the reaction will be. This is because the stronger nucleophile will be able to break the bond between the alkyl halide and the nucleophilic carbon more easily. For this reason, the order of increasing Sn1 reaction rate will be CH3F < CH3Cl < CH3I.

Complete Question:

List the following alkyl halides in order of increasing sn1 reaction rate. what will be the reaction rate order for sn1 reaction rate? provide your reasoning.

Learn more about chemistry reactions:

https://brainly.com/question/16416932

#SPJ4

In the below acid-base conditions, starvation will cause severe alkalosis without respiratory correction.

The helps in proper that make it up respiration are as follows: Pulmonary ventilation is the process of forcing air into and out of the lungs. External respiration is the process through which dioxide and oxygen are transferred from the lung to tissues. internal respiration, cellular gas exchange, and blood flow through systemic capillaries.

Respiratory diseases can be brought on by infections, smoking, exposure to smoke exposure, asbestos, radiation, and other forms of air pollution. Some of respiratory conditions include allergies, chronic obstructive pulmonary disease (COPD), respiratory failure, bronchitis, and lung cancer.

To know more about respiratory visit:

brainly.com/question/15877304

#SPJ4

The K eq Assuming T is298 K and R is 8.315 . 10-3 kJ/mol*K, the standard free energy for the reaction shown in the diagram is -3.5 kJ/mol. 4.10 is the value.

To learn more about mass actions refer to:

https://brainly.com/question/25839631

#SPJ4

When an atom looses one electron it gains +1 charge and forms a unipositive ion.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.

Learn more about ions,here:

https://brainly.com/question/1488567

#SPJ1

Due to steric crowding between -CH2-CH(CH3)2 and -CH3, ortho product is the minimum.

Benzene is used on the whole as a solvent within the chemical and pharmaceutical industries, as a starting material and an intermediate in the synthesis of numerous chemical substances, and in gasoline.

Benzene is a broadly used commercial chemical. Benzene is found in crude oil and is a main part of gasoline. it's used to make plastics, resins, synthetic fibers, rubber lubricants, dyes, detergents, pills, and pesticides.

Benzene is one of the most usually acknowledged fragrant compounds with the chemical components C6H6. Benzene is produced certainly by means of volcanoes and woodland fires.

Learn more about benzene here:-https://brainly.com/question/6028840

#SPJ4

The following element occurs as diatomic molecules by completing their octets.

The octet rule is a chemical rule of thumb that reflects the theory that main- group elements tend to bond in such a way that each atom has eight electrons in its valence shell, giving it the same electronic configuration as a noble gas.

                        H+H ⇒ H-H ⇒ H₂

                        Fl+Fl ⇒ Fl-Fl ⇒ Fl₂

                        O+O ⇒ O=O ⇒ O₂

                        N+N ⇒ N≡N ⇒ N₂

learn more about octet rule: https://brainly.com/question/865531

#SPJ4

The pressure of container filled with oxygen is 1,687.5 millimeter of mercury. As a result, pressure is sometimes expressed in terms of millimeters of mercury (mmHg) or centimeters of mercury (cmHg).

Explanation:

Given that,

Pressure = 225 Kpa

Pressure in millimeter of mercury = ?

Since, we know that,

1 Kpa = 7.5 millimeter of mercury

225 Kpa = 225 *7.5 millimeter of mercury

225 Kpa =1,687.5 millimeter of mercury.

The pressure of container filled with oxygen is 1,687.5 millimeter of mercury.

To learn more about Millimeters of mercury (mmHg) refer to:

https://brainly.com/question/12187415

#SPJ4

Yes, you can put fruit on a pewter plate to serve it, but fruits will look better and stay fresher if you cover the plate with green leaf lettuce first. Put the platter's ruffled edge on the outside.

And its Centre so that it points toward the Centre. Modern pewter is lead-free and safe to use. Tin makes up the majority of it, with small amounts of antimony and copper. on a single manufacturer. The products, which come with a lead-free guarantee, can be used with any kind of food or fruits. The majority of modern pewter's remaining components are an alloy of antimony and food-safe like fruits. Lead-free may occasionally include a little quantity of silver that is also acceptable to eat if you stay away from acidic dishes like those made with tomatoes, etc.

Learn more about pewter here

brainly.com/question/29550356

#SPJ4

For ratio 5:2,  17.5 cups of flour, the is to be add is 7 cups water.

Given, ratio is 5:2

Let, 5x = 17.5

x = 3.5

Then, 2x = 7

Hence, there is 7 cups of water to add.

A ratio is an ordered pair of numbers x and y, written x / y, where y does not equal 0. A proportion is an equation in which two ratios are set equal to each other.

For example, if there is 5 men and 3 women you could write the ratio as: 5 : 3 , for every 5 men there are 3 women.

Learn more about ratio here:- https://brainly.com/question/2914376

#SPJ4

Add the bigger number twice or double it and then subtract 1 from it.

Doubles minus one is a strategy used to add two consecutive numbers. That is when two numbers are next to each other. Simply add the larger number twice, or double it and subtract 1 to get the final result. For example, here the consecutive numbers 7 and 8 are added using the double minus one strategy.

So the fact that the product of two negative numbers is positive is related to the fact that the reciprocal of a positive number return that positive number. Doubles Minus one is a strategy used to add two consecutive numbers. That is when two numbers are next to each other. Simply add the larger number twice or double it and subtract 1 to get the final result.

Learn more about Doubles minus one here:-https://brainly.com/question/6001585

#SPJ4

In a spectrophotometer, both absorbance and transmittance indicate the amount of light passing through a sample. A high absorbance corresponds to a low transmittance.

Learn more about low transmittance refer to :

https://brainly.com/question/2302685

#SPJ4