There are four qualitative approaches to determining HR demand: expert judgment, delphi technique, nominal group technique, and focus groups.
Expert judgment involves gathering insights and opinions from subject matter experts or experienced professionals in the field. They provide their judgment based on their knowledge and expertise in HR and the organization's specific context.
The delphi technique gathers input from a panel of experts who participate in multiple rounds of anonymous surveys. The results are aggregated and shared iteratively until a consensus is reached.
The nominal group technique involves a structured group discussion where participants generate ideas individually, share them with the group, and then collectively prioritize and rank them.
Know more about HR demand here:
https://brainly.com/question/32128854
#SPJ11
Intro Samsung has sales of $52,000 and a net income of $16,000. Total assets are $46,000 and total equity is $27,000.
The consumer electronics industry as a whole has the following characteristics:
- Profit margin 0.137
- Total asset turnover 0.941
- Equity multiplier 1.8
- Return on equity 0.232
1) What is Samsung's profit margin?
2) What is Samsung's total asset turnover?
3) What is Samsung's equity multiplier?
4) What is Samsung's return on equity?
5) Which is the main factor explaining why Samsung has a greater ROE than the industry?
a. Higher profit margin
b. Higher total asset turnover
c. Higher equity multiplier.
Samsung's profit margin can be calculated by dividing the net income by the sales. In this case, the profit margin is $16,000 / $52,000 = 0.307.
The total asset turnover is calculated by dividing the sales by the total assets. For Samsung, the total asset turnover is $52,000 / $46,000 = 1.130.The equity multiplier is calculated by dividing the total assets by the total equity. In Samsung's case, the equity multiplier is $46,000 / $27,000 = 1.704.Samsung's return on equity (ROE) can be calculated by multiplying the profit margin, total asset turnover, and equity multiplier. Using the given values, the ROE is 0.307 * 1.130 * 1.704 = 0.571.
The main factor explaining why Samsung has a greater ROE than the industry can be identified by comparing the components of ROE. In this case, the higher equity multiplier (c) contributes to a greater ROE. The equity multiplier reflects the company's use of leverage, which magnifies the return on equity. A higher equity multiplier indicates that Samsung has a higher proportion of debt relative to equity, resulting in a higher ROE.
Learn more about return on equity (ROE) here:
https://brainly.com/question/30403915
#SPJ11
Discuss the challenges faced by organisations trying to improve the environmental sustainability OR ethics of their supply chains. In your answer refer to two of the approaches below:
Lean and Green (waste reduction)
The Circular economy
Sustainable logistics and transport
Modern slavery
Supplier codes of conduct
Transparency and traceability.
Link your answer to at least one of the United Nations Sustainable Development Goals and illustrate your discussion with a business
case(s).
Circular Economy and Lean and Green (waste reduction) are frequently used strategies for the businesses that want to improve the ethics or environmental sustainability of their supply chains. The correct options are A and B.
Thus, initiatives for lean manufacturing and becoming green have a difficult time locating and resolving waste causes in intricate supply networks. Toyota's use of Lean concepts and waste minimization techniques in their production processes, which aligns with UN Sustainable Development Goal (SDG), serves as a case study for this.
Implementing the circular economy presents difficulties include developing items for recycling, setting up reverse logistics networks, and changing customer behavior. This strategy is demonstrated by Patagonia's Worn Wear programe, which encourages repair and reuse and supports SDG 12.5 (Reduction of Waste Generation).
Thus, the ideal selection is option A and option B.
Learn more about Circular Economy here:
https://brainly.com/question/15171941
#SPJ4
Open a recommendation message with facts relevant to the position or benefit sought.
TRUE
FALSE
TRUE. In a recommendation message, it is important to include relevant facts related to the position or benefit being sought.
By presenting factual information, you can provide credibility and support to your recommendation. Whether you are recommending a candidate for a job, a product for a customer, or a strategy for a business, including pertinent facts can strengthen your argument and increase the likelihood of a positive outcome.
Facts serve as evidence and help to substantiate the claims or assertions made in the recommendation message. They provide objective information that can be relied upon and verified by the recipient. By presenting facts, you can showcase the qualifications, achievements, or benefits associated with the position or benefit being sought. This allows the recipient to make an informed decision based on concrete information rather than mere opinions or subjective statements. Including relevant facts adds weight to your recommendation and increases its persuasiveness, making it more likely to be considered and acted upon by the recipient.
Learn more about customer here:
https://brainly.com/question/13472502
#SPJ11
Ordinary least squares (OLS) method is applied in order to:
estimate the residuals of the regression model
choose appropriate data for estimating the coefficients of the regression model
estimate the coefficients of the regression model
What kind of decision can be taken if the empirical level of significance (p-value) is lower than Type I (alfa) risk?
To reject the null in favor of the alternative hypothesis
To accept the null hypothesis
There is not enough information for taking a decision
To reject the alternative in favor of the null hypothesis
choose the appropriate functional form of the regression model
The appropriate functional form of the regression model can be chosen based on the empirical level of significance (p-value) being lower than the Type I (alpha) risk.
When conducting hypothesis testing in statistical analysis, the empirical level of significance (p-value) is compared to the predetermined Type I error rate (alpha) to make a decision. If the p-value is lower than the alpha level, it means that the observed data provides strong evidence against the null hypothesis and supports the alternative hypothesis.
In this case, the appropriate decision would be to reject the null hypothesis in favor of the alternative hypothesis. In the context of choosing the appropriate functional form of the regression model, the p-value can be used to assess the significance of different variables or transformations.
If the p-value is lower than the predetermined alpha level, it suggests that the particular functional form being considered is statistically significant and can be chosen for the regression model.
Learn more about Regression click here :brainly.com/question/25987747
#SPJ11
A project is a one-time job that has - A. B. C. D. Indefinite starting and ending points Clearly defined objectives, schedule, and scope Must have a budget All of the above QUESTION 3, MARKS: 20 Project milestone determines - A. B. O C. D. C Controlling sequence of activities Start and completion dates of all work If the requested completion date is possible All of the above QUESTION 4, MARKS: 20 In order to address any changes in the project, what action you (assume you are a project leader) should take? A. Project leader can do any changes without any discussion with team members B. Any changes can be done without the concern of upper management C. Recommended options should be listed, prepare decision matrix, get feedback from members, and get approval from top management D. None of the above QUESTION 5, MARKS: 20 What is the role of a project manager during the project close-out? A. Just handed over to the clients without obtaining acceptance B. Ensure the project is opted for deliver and formally accepted by the clients C. Complete documentation is not a must during close out D. Brainstorm to give thanks to the team members
The role of a project manager during the project close-out is to option B. ensure that the project is delivered and formally accepted by the clients.
The project manager is responsible for ensuring that all deliverables have been completed according to the project requirements and that the clients are satisfied with the outcome. This involves finalizing any remaining tasks, obtaining formal acceptance from the clients, and ensuring that all documentation related to the project is completed and archived appropriately.
A project is a one-time job that has Clearly defined objectives, schedule, and scope, must have a budget. The statement is true regarding the characteristics of a project.Project milestone determines controlling sequence of activities, start and completion dates of all work, if the requested completion date is possible. The statement is false as Project milestone determines all of the above.
In order to address any changes in the project, the recommended options should be listed, prepare decision matrix, get feedback from members, and get approval from top management. Therefore, option C is correct.A project manager's role during the project close-out is to ensure the project is opted for delivery and formally accepted by the clients. Therefore, option B is correct.
To know more about clients click here:
https://brainly.com/question/29051195
#SPJ11
.Robert and Donna, two auditors you work with at the Internal Audit Department of ABC Company, have independently assessed the risks associated with the accounts receivable. The appropriate audit risk for both is determined to be .02. Both agree that inherent risk should be set at the maximum (1.0) and that no analytical procedures will be performed. Robert evaluates control risk as moderate (.40) while Donna assesses it as relatively low (.20).
ABC Company processes an average of 400 vouchers payable every month. Each voucher package contains a copy of the cheque disbursed and supporting documents such as vendor invoices, receiving reports, and purchase orders. The Auditor plans to example a sample of vouchers listed in the voucher registry using attribute sampling to evaluate the effectiveness of several controls. The attributes include: I) Agreement of voucher amounts with invoice amounts; II) Voucher cancelled after payment
Based on past experience, the auditor expects a deviation rate of 2% for the first attribute and 1% for the second. The Auditor decides on a tolerable deviation rate of 7% for the first attribute and 6% for the second. The risk of assessing control risk too low is set at 5%. Assume that the auditor’s tests uncovered 2 occurrences of voucher amounts not agreeing with invoice amounts and 2 occurrences of vouchers not being cancelled after payment. Required:
a. What is the risk of incorrect acceptance for Robert and for Donna and which auditor will have to collect the most evidence (explain your reasoning)? Please prepare Robert's assessment & sample selection.
To determine the risk of incorrect acceptance for Robert and Donna, we need to calculate the upper limit rate (ULR) for each attribute and compare it to the tolerable deviation rate (TDR).
For Robert:
Attribute 1: Agreement of voucher amounts with invoice amounts
Expected deviation rate: 2%
Tolerable deviation rate: 7%
Risk of assessing control risk too low: 5%
Using attribute sampling tables or software, the sample size required to achieve the desired level of confidence can be calculated. Let's assume Robert selects a sample size of 100 vouchers.
Number of deviations found: 2
Sample size: 100
Observed deviation rate: 2/100 = 2%
Using the attribute sampling table, the upper limit rate (ULR) corresponding to a sample size of 100, 2 deviations, and a 5% risk of assessing control risk too low is 8.79%.
Since the ULR (8.79%) is higher than the tolerable deviation rate (7%), the risk of incorrect acceptance for Attribute 1 is acceptable for Robert.
Attribute 2: Voucher cancelled after payment
Expected deviation rate: 1%
Tolerable deviation rate: 6%
Risk of assessing control risk too low: 5%
Using the same sample size of 100 vouchers:
Number of deviations found: 2
Sample size: 100
Observed deviation rate: 2/100 = 2%
The ULR corresponding to a sample size of 100, 2 deviations, and a 5% risk of assessing control risk too low is 8.79%.
Since the ULR (8.79%) is higher than the tolerable deviation rate (6%), the risk of incorrect acceptance for Attribute 2 is also acceptable for Robert.
Regarding sample selection, Robert will need to collect a sample size of 100 vouchers.
Note: To calculate the risk of incorrect acceptance for Donna and provide her sample selection, we would need her assessment of control risk for each attribute and the number of deviations found in her sample.
Learn more about tolerable here
https://brainly.com/question/31366843
#SPJ11
Access an online loan calculator with annual payments, such as the one at mycalculators.com, to produce an amortization schedule for Welton Corporation’s installment note that has original principal of $52,000, interest of 9% compounded annually, and a term of 3 years.
Welton Corporation established the note on the first day of its fiscal year and will fully repay the note by the end of year 3 on its December 31 fiscal year-end. Prepare Welton Corporation’s journal entries on (a) January 1, Year 1; (b) December 31, Year 1; (c) December 31, Year 2; and (d) December 31, Year 3. (If no entry is required for a transaction/event, select "No Journal Entry Required" in the first account field. Do not round intermediate calculations. Round your final answers to the nearest dollar amount.)
Welton Corporation took out an installment note with an original principal of $52,000, an interest rate of 9% compounded annually, and a term of 3 years. The journal entries for Welton Corporation are as follows: (a) On January 1, Year 1, they would debit Cash for the amount received and credit Notes Payable for the principal borrowed. (b) On December 31, Year 1, they would debit Interest Expense for the accrued interest and credit Interest Payable. (c) On December 31, Year 2, they would repeat the journal entry from Year 1. (d) On December 31, Year 3, they would debit Notes Payable and Interest Payable, and credit Cash for the final payment amount.
(a) On January 1, Year 1, Welton Corporation would record the issuance of the installment note. They would debit Cash for the amount received ($52,000) and credit Notes Payable for the principal borrowed.
(b) On December 31, Year 1, Welton Corporation would record the accrued interest for the year. The interest expense can be calculated using the formula: Interest Expense = Principal * Interest Rate. In this case, the interest expense would be $52,000 * 9% = $4,680. They would debit Interest Expense for $4,680 and credit Interest Payable.
(c) On December 31, Year 2, the same journal entry as in Year 1 would be recorded. Interest Expense would be calculated again based on the remaining principal balance.
(d) On December 31, Year 3, Welton Corporation would make the final payment to fully repay the note. They would debit Notes Payable for the remaining principal balance and Interest Payable for any accrued interest, and credit Cash for the total payment amount.
These journal entries accurately reflect the issuance of the installment note, the recognition of interest expense, and the final repayment of the note by Welton Corporation.
Learn more about interest expense here :
https://brainly.com/question/29906371
#SPJ11
Compare and contrast cGMP (Current Good Manufacturing Practices), cGLP (Current Good Laboratory Practices), and cGCP (Current Good Clinical Practices). How might they each be applied differently?
cGMP, cGLP and cGCP are regulatory guidelines that ensure quality, safety, and consistency in different areas of the pharmaceutical and healthcare industries.
cGMP refers to the set of regulations and practices that govern the manufacturing and quality control of pharmaceutical products. It ensures that the manufacturing processes are consistent, controlled, and meet the required standards of safety, efficacy, and quality. cGMP covers various aspects such as facility design, equipment validation, personnel training, documentation, quality control, and product testing.
cGLP focuses on the standards and protocols for conducting non-clinical laboratory studies to assess the safety and effectiveness of drugs, medical devices, and other healthcare products. It ensures the integrity and reliability of data generated during preclinical research and development. cGLP covers areas such as study design, personnel qualifications, equipment calibration, documentation, record keeping, and data analysis.
cGCP pertains to the guidelines for conducting clinical trials, particularly in human subjects. It ensures that clinical trials are conducted ethically, with the rights and well-being of participants protected, and that the data generated is reliable and accurate. cGCP covers aspects such as trial design, informed consent, investigator qualifications, participant safety monitoring, data collection and analysis, and record keeping.
While all three practices focus on quality and compliance, they differ in their specific applications. cGMP is primarily concerned with the manufacturing process and ensuring the quality of finished pharmaceutical products. cGLP focuses on non-clinical laboratory studies, ensuring the reliability and integrity of data generated during research and development. cGCP is specific to clinical trials, ensuring ethical conduct, participant safety, and reliability of data generated during human studies. Each practice has its own set of guidelines and requirements tailored to the respective area of application, reflecting the unique considerations and risks involved.
Learn more about efficacy here:
https://brainly.com/question/30765398
#SPJ11
Is there a significant difference between the overall value of bonds versus stocks? Would there be a change of opinion if an individual were going to have long or short-term goals for investments?
Yes, there is a significant difference between the overall value of bonds versus stocks. An individual's opinion will vary depending on their long-term or short-term investment objectives. Bonds are safer investments compared to stocks. Bonds offer the opportunity for investors to lend funds to corporations or governments in exchange for regular interest payments and the return of principal on a particular date. In contrast, stocks represent ownership interests in a corporation and provide a percentage of ownership in the company and any future earnings in the form of dividends. However, the value of stocks is more volatile than bonds, meaning they can rise and fall more sharply over time.
For investors with long-term investment objectives, they may want to focus on stocks. This is because stocks have historically outperformed bonds over the long term. For example, according to the S&P 500 Index, stocks have had an average annual return of 10%, while long-term bonds have returned around 5%. An investor with a long-term investment horizon may want to invest in stocks to take advantage of the potential for higher returns.
On the other hand, investors with short-term investment objectives may prefer bonds. Bonds provide a steady source of income and can help investors avoid the risks associated with the volatility of the stock market. This is because bonds offer guaranteed returns at a specified rate. Therefore, if an individual has a short-term investment horizon, they may want to invest in bonds to ensure they receive a steady income stream.
In conclusion, the difference in the overall value of bonds versus stocks is significant. An investor's opinion may change depending on their investment objectives, whether they are short-term or long-term. An investor with a long-term investment horizon may prefer to invest in stocks to take advantage of the potential for higher returns, while an investor with a short-term investment horizon may prefer bonds to guarantee a steady income stream.
To know more about bonds visit :
https://brainly.com/question/31358643
#SPJ11
Question 1: On May 1, 2022, Carlo has been in a trading business for five years as a sole proprietor.
He needed additional capital to fund business expansion so he decided to invite Jamie by investing cash for a one-third interest in the new partnership, CABLES Trading.
CABLES Trading would assume the liabilities of Carlo’s business.
Jamie accepted the invitation and both agreed to revalue assets of Carlo’s business as itemized: Accounts Receivable ₱50,000; Merchandise Inventory ₱28,000; Office Equipment ₱22,000; and Land ₱279,000.
Account balances in the books of Carlo were as follows:
Account Titles
Debit
Credit
Cash
₱135,000
Accounts Receivable
60,000
Allowance for Doubtful Accounts
₱ 4,000
Merchandise Inventory
25,000
Office Equipment
33,000
Accumulated Depreciation
15,000
Land
260,000
Accounts Payable
194,000
Carlo, Capital
300,000
How much is the capital of CABLES Trading upon formation?
Capital refers to the investment made by the partners or proprietors to start a business. Carlo, who has been running a trading business for five years as a sole proprietor, needed additional capital to expand his business. As a result, he invited Jamie to invest cash for a one-third interest in the new partnership,
CABLES Trading.CABLES Trading is going to take over Carlo's business liabilities. Jamie accepted the invitation and both agreed to revalue the assets of Carlo's business as follows: Accounts Receivable ₱50,000; Merchandise Inventory ₱28,000; Office Equipment ₱22,000; and Land ₱279,000. The account balances in the books of Carlo were as follows:Account TitlesDebitCreditCash₱135,000Accounts Receivable60,000Allowance for Doubtful Accounts₱ 4,000Merchandise Inventory25,000Office Equipment33,000Accumulated Depreciation15,000Land260,000Accounts Payable194,000Carlo, Capital300,000To compute the total capital of CABLES Trading upon its formation, you need to add Jamie's capital investment to the book value of Carlo's assets.
Since Jamie invested one-third of the capital, he has a 33.33% share in the business. Carlo's assets and liabilities must be revalued to determine the book value of his capital.Account TitlesDebitCreditCash₱135,000Accounts Receivable₱50,000Merchandise Inventory₱28,000Office Equipment₱22,000Accumulated Depreciation₱15,000Land₱279,000Accounts Payable₱194,000Carlo, Capital₱241,000Revaluation Surplus₱48,000Total₱529,000Using the above computations, the total capital of CABLES Trading upon formation is ₱529,000.
To know more about Capital,visit:-
https://brainly.com/question/20566613
#SPJ11
Bahrain Company makes snow blowers. It has two departments that process all products: Assembly and Testing. The following data pertain to the Assembly department: Direct materials are added at the beginning of the process and conversion costs are uniformly incurred. The degree of completion of conversion cost is as follows: At the beginning of September, work in process is 40% complete and at the end of the month work in process is 60% complete. Other data for the month include: Beginning work-in-process inventory 6,400 units 8,000 units Units started Units completed 12,800 units Ending work-in-process inventory ? Conversion costs for September $800,000 Direct materials cost September $1,040,000 Beginning work-in-process costs: Materials $616,000 Conversion $328,320 Required: (9 marks) a) Prepare a production cost schedule for the Assembly Department at the end of September using the weighted average method of process costing. b) Prepare the necessary journal entries. (3 marks)
Production costs refer to the costs a company incurs from manufacturing a product or providing a service that generates revenue for the company. Production costs can include a variety of expenses, such as labor, raw materials, consumable manufacturing supplies, and general overhead.
Units Materials ($). Conversion Costs ($)
Beginning work-in-process inventory (BWIP) 6,400 $328,320 $487,680
Units started 8,000 - -
Total units accounted for (BWIP + Units) 14,400 - -
Units completed 12,800 - -
Ending work-in-process inventory (EWIP) 1,600 - -
Equivalent Units of Production 14,400 - -
Cost per equivalent unit
Materials $22.83
Conversion costs - $91.67
Costs accounted for
Materials $292,800
Conversion costs - $1,173,333
Total costs $292,800 $1,173,333
b) Journal Entries:
1. To record the transfer of costs from beginning work-in-process inventory (BWIP) to production:
Debit: Work-in-Process Inventory (Assembly) - Materials: $328,320
Debit: Work-in-Process Inventory (Assembly) - Conversion Costs: $487,680
Credit: Beginning Work-in-Process Inventory (Assembly): $816,000
2. To record the transfer of costs from production to ending work-in-process inventory (EWIP):
Debit: Ending Work-in-Process Inventory (Assembly): $146,133.33 (Materials) + $586,200 (Conversion Costs)
Credit: Work-in-Process Inventory (Assembly) - Materials: $146,133.33
Credit: Work-in-Process Inventory (Assembly) - Conversion Costs: $586,200
3. To record the completion of units:
Debit: Finished Goods Inventory: $292,800 (Materials) + $1,173,333 (Conversion Costs)
Credit: Work-in-Process Inventory (Assembly) - Materials: $292,800
Credit: Work-in-Process Inventory (Assembly) - Conversion Costs: $1,173,333
To know more about production cost, click here:-
https://brainly.com/question/15235684
#SPJ11
Impossibility of performance is a proper excuse to performance under the UCC. O True False Question 24 A destination contract relieves the seller from liability when delivered to the carrier for shipment. True False
False. Impossibility of performance is not a proper excuse under the Uniform Commercial Code (UCC). The UCC provides specific circumstances under which performance may be excused, such as when it is commercially impracticable due to a supervening event that makes performance impossible.
Under the UCC, which governs commercial transactions in the United States, there are certain circumstances in which a party's performance may be excused. These circumstances are explicitly defined and go beyond mere impossibility of performance.
The UCC recognizes two main doctrines that may excuse performance: commercial impracticability and the occurrence of a supervening event. Commercial impracticability occurs when unforeseen circumstances arise that make performance unreasonably difficult or costly. This could include events like natural disasters, extreme weather conditions, or severe shortages of materials. In such cases, the party may be excused from performance if they can demonstrate that the event was unforeseen and that it has rendered performance commercially impracticable.
The occurrence of a supervening event refers to an event that was not anticipated by the parties at the time of contract formation and makes performance impossible. Examples of supervening events could include government regulations prohibiting performance or the destruction of the subject matter of the contract. If such an event occurs, the party affected by it may be excused from performance.
However, it's important to note that mere impossibility of performance, without meeting the specific criteria of the UCC, does not serve as a proper excuse. The UCC sets forth these specific requirements to ensure that parties do not easily avoid their contractual obligations by claiming impossibility.
Learn more about circumstances here: brainly.com/question/14485159
#SPJ11
The quarterly returns for a group of 72 mutual funds with a mean of 1.1% and a standard deviation of 4.6% can be modeled by a Normal model. Based on the model N(0.011,0.046), what are the cutoff values for the
A. Highest 30% of these funds?
B. Lowest 20%?
C. Middle 80%?
D. Highest 80%?
A. The cutoff value for the highest 30% of the funds is approximately 0.035.
B. The cutoff value for the lowest 20% of the funds is approximately -0.008.
C. The lower cutoff value for the middle 80% of the funds is approximately -0.061, and the upper cutoff value is approximately 0.083.
D. The cutoff value for the highest 80% of the funds is approximately -0.008.
To find the cutoff values for different percentages of the mutual funds' quarterly returns, we can use the properties of the Normal distribution. Given that the quarterly returns can be modeled by the Normal distribution N(0.011, 0.046), we can calculate the cutoff values using the Z-scores.
A. Highest 30% of the funds:
To find the cutoff value for the highest 30% of the funds, we need to find the Z-score that corresponds to the 70th percentile (100% - 30% = 70%). Using a Z-score table or a statistical calculator, we find that the Z-score corresponding to the 70th percentile is approximately 0.524.
The cutoff value for the highest 30% of the funds is given by:
Cutoff value = Mean + (Z-score * Standard deviation)
Cutoff value = 0.011 + (0.524 * 0.046)
B. Lowest 20% of the funds:
To find the cutoff value for the lowest 20% of the funds, we need to find the Z-score that corresponds to the 20th percentile. Using a Z-score table or a statistical calculator, we find that the Z-score corresponding to the 20th percentile is approximately -0.841.
The cutoff value for the lowest 20% of the funds is given by:
Cutoff value = Mean + (Z-score * Standard deviation)
Cutoff value = 0.011 + (-0.841 * 0.046)
C. Middle 80% of the funds:
To find the cutoff values for the middle 80% of the funds, we need to find the Z-scores that correspond to the 10th and 90th percentiles. Using a Z-score table or a statistical calculator, we find that the Z-score corresponding to the 10th percentile is approximately -1.282 and the Z-score corresponding to the 90th percentile is approximately 1.282.
The cutoff values for the middle 80% of the funds are given by:
Lower cutoff value = Mean + (Z-score for 10th percentile * Standard deviation)
Upper cutoff value = Mean + (Z-score for 90th percentile * Standard deviation)
D. Highest 80% of the funds:
To find the cutoff value for the highest 80% of the funds, we need to find the Z-score that corresponds to the 20th percentile (100% - 80% = 20%). Using a Z-score table or a statistical calculator, we find that the Z-score corresponding to the 20th percentile is approximately -0.841.
The cutoff value for the highest 80% of the funds is given by:
Cutoff value = Mean + (Z-score * Standard deviation)
Cutoff value = 0.011 + (-0.841 * 0.046)
Please note that the values provided are approximate and may vary slightly depending on the level of precision used in the Z-score table or calculator.
Learn more about cutoff value here:-
https://brainly.com/question/30092940
#SPJ11
President George W. Bush's environmental policies reflected his overall commitment to
A. limiting the power of big business.
B. conserving fossil fuels.
C. protecting disadvantaged Americans.
D. reducing government regulation.
President George W. Bush's environmental policies reflected his overall commitment to reducing government regulation. Therefore option (D) is the correct answer.
W. Bush's environmental policies reflected his overall commitment to reducing government regulation. His policies aimed at reducing regulation, particularly in the environment. W. Bush's administration went after many of the government's most important environmental laws, including the Clean Water Act, the Clean Air Act, and the Endangered Species Act, all of which it tried to roll back or undermine. In conclusion, the option that completes the statement above is the option D, which is reducing government regulation.
Learn more about W. Bush's environmental policies https://brainly.com/question/11821044
#SPJ11
earnings before interest (ebi) adjusts net income for which one of the following groups of items?
Earnings before interest (EBI) is a financial metric that adjusts net income by removing the costs associated with interest expenses.
Interest expenses arise when a company borrows money from lenders and must make regular payments to those lenders in exchange for the use of those funds.
These expenses are subtracted from a company's total revenue to arrive at its operating income.
By removing interest expenses from the equation, EBI provides a clearer picture of a company's operational profitability and financial health. This is important because interest expenses can vary significantly from one company to another depending on their debt structure and borrowing activities. Additionally, EBI is often used as a proxy for a company's cash flow since it represents the amount of money generated from its core operations before accounting for interest payments.
Investors and analysts often use EBI when comparing companies within the same industry or sector, as it allows for an apples-to-apples comparison of their profitability and financial performance. Overall, earnings before interest is an important metric that provides insight into a company's ability to generate profits from its core operations, while also accounting for the impact of interest expenses on its bottom line.
Learn more about net income here:
https://brainly.com/question/32614743
#SPJ11
Earnings Before Interest (EBI) adjusts net income for which one of the following groups of items? a. nonrecrring items
b. after tax
c. distorion
d. Nonrecurring items, after-tax interest, and distortions related to accounting quality concerns.
In Brazil Nestlé are using door-to-door selling to reach low-income neighbourhoods, Dell computers provide a home delivery for its products, Avon are using sales representatives and other companies are using other methods to reach consumers. Critically analyse and evaluate the different channels that can be used by an organisation for reaching its customers.
In order to reach consumers, different channels can be used by an organization. Some of the channels include door-to-door selling, home delivery, and sales representatives.
A company can use different channels to reach its customers. Some of the channels include the following:Door-to-door selling- Nestlé uses this method to reach customers in low-income neighborhoods. It involves salespeople going from door to door, selling products.Home delivery- Dell computers use home delivery to reach customers. It involves delivering products to the customer's home. Sales representatives- Avon is using sales representatives to reach customers. It involves having representatives who interact with customers and sell products to them.Other methods- other companies may use other methods to reach their customers. For instance, some companies may use social media to reach their customers. Other companies may use advertisements in newspapers and other publications.
The use of different channels to reach customers is an important aspect of marketing. Each channel has its advantages and disadvantages. For instance, door-to-door selling can be effective in reaching customers who are not easily reachable through other channels. However, it can also be expensive to implement, and it may not be suitable for all products.Home delivery can be an effective way to reach customers who are unable to go to a physical store. It can be convenient for customers who are busy or who live in areas that are not easily accessible. However, it can also be expensive to implement, and it may not be suitable for all products.Sales representatives can be an effective way to reach customers who are looking for personalized attention. They can provide customers with information about products and help them to make informed decisions. However, sales representatives can be expensive to hire, and they may not be suitable for all products.Overall, the choice of channel will depend on a variety of factors, including the product being sold, the target market, and the company's marketing budget.
To know more about consumers visit :-
https://brainly.com/question/27773546
#SPJ11
1. The reason economists focus on measuring GDP is because
a. Economists are mostly concerned about profits.
b. Real GDP is the easiest thing to "count up" countries.
c. Real GDP is highly correlated with other measures of well-being.
d.None of the above
2. Using the Rule of 70, an economy that grows at 2% a year will take approximately ____ years to double its Real GDP
a. 35 years
b. 37 years
c. 140 years
d. 40 years
3. Let’s suppose that the state government of Pythagoras Land establishes an interest rate ceiling of 3 % through a usury law. (The equilibrium interest rate is 5%). One would expect to see...
a. A shortage of funds
b. A surplus of funds
c. An equilibrium
d. None of the above
4. Which of the following is an effect of the government borrowing to increase spending?
a. A decrease in private investment
b. An increase in private consumption
c. A decrease in interest rates
d. None of the above
5. What's the measure of standard of living used by economists?
a. Real GDP per capita
b. Nominal GDP per capita
c. Real GDP
d. Nominal GDP
The reason economists focus on measuring GDP is that Real GDP is highly correlated with other measures of well-being. Therefore, the answer to question 1 is (c) Real GDP is highly correlated with other measures of well-being. As a result, it has become a widely accepted measure of an economy's overall health.
The gross domestic product (GDP) is one of the most significant macroeconomic measures. It is a statistical estimate of a nation's total monetary value of all the goods and services produced in a specified period. It serves as a general indication of an economy's size and development. GDP is calculated using several measures such as consumption, investment, net exports, and government spending.Economists and policymakers use GDP as a measure of economic performance, as it helps to determine a country's economic well-being. GDP is regarded as a reliable measure of economic growth, output, and consumption. It provides information on whether an economy is growing or contracting. However, GDP only measures a country's output, and it does not take into account factors like quality of life, poverty levels, and income inequality. Furthermore, GDP does not indicate how income is distributed in a society, which is an essential indicator of welfare.Economists focus on measuring GDP because Real GDP is highly correlated with other measures of well-being.
Therefore, it has become a widely accepted measure of an economy's overall health. For example, an increase in real GDP can lead to increased employment opportunities, improved living standards, and an overall boost to an economy. The Rule of 70 can be used to predict how long it will take for Real GDP to double. An economy that grows at 2% per year will take approximately 35 years to double its Real GDP. The interest rate ceiling that is established by the state government of Pythagoras Land can have an impact on funds. If an interest rate ceiling of 3 % is established through a usury law, one would expect to see a shortage of funds. Borrowing by the government to increase spending has an impact on private investment. A decrease in private investment is a consequence of the government borrowing to increase spending.
To know more about GDP visit:
brainly.com/question/13193731
#SPJ11
(Financing Component) On Jan. 1, 20x1, ABC Co. enters into a Contract with a customer to transfer a license for a fixed fee of P100,000 payable as follows: a. 20% upon signing of contract. b. Balance due in 4 equal annual installments starting Dec. 31, 20x1. The discount rate is 12%. ABC incurs direct contract costs of P20,000 in 20x1. ABC transfers the license to the customer on Jan. 3, 20x2. The license provides the customer with the right to use ABC's intellectual property as it exists at grant date. Requirement: Compute for the profits in 20x1 and 20x2 respectively.
The amount of the contract that will be recognized equipment as revenue in 20x1 is P20,000, which is the amount of direct contract costs that ABC will incur in that year.
The rest of the P80,000 (P100,000 - P20,000) will be deferred as unearned revenue since the service is not yet performed.
In 20x2, ABC will recognize P30,384 of the P80,000 deferred revenue. P30,384 was calculated by using.
The deferred revenue balance of P80,000, less the initial payment of P20,000, times the present value of annuity of P1 at 12 percent for four years.
The revenue for 20x2 would be calculated as follows:
= P80,000 - P20,000
= P60,000
= P60,000 x 0.45639 (present value of annuity of P1 for four years at 12 percent)
= P27,383
= P27,383 - P4,999 (deferred revenue balance)
= P22,384P22,384 + P8,000 (second installment of payment)
= P30,384 ABC will recognize the remaining deferred revenue of
=P50,616 (P80,000 - P30,384) as revenue in 20x3 to = 20x5.
To know more about Equipment visit:
https://brainly.com/question/32627915
#SPJ11
Experian Marketing Services is a global provider of marketing research. It helps organizations intelligently interact with today's dynamic, empowered, and hyperconnected consumers. By coordinating seamless and intelligent interactions across all channels, marketers are able to precisely plan and execute superior brand experiences that deepen customer loyalty, strengthen brand advocacy, and maximize profits. Marketing research is the act of collecting, interpreting, and reporting information concerning a clearly defined marketing problem. When done properly, marketing research helps companies understand and satisfy the needs and wants of customers. Marketing research has become more important, and more complicated, as markets continue to become globalized and product life cycles become shorter. In such a climate, companies need accurate information to reduce risk and make good decisions. This quest for information compels companies to spend billions of dollars each year on marketing research. This activity is important because marketing managers need to be aware of changes in the external environment that may represent new opportunities or threats for the organization. In particular, marketing managers need to be able to recognize and understand shifts in consumer attitudes and preferences in order to develop new marketing strategies that are well adapted to changing conditions. Effective market research can enable marketing managers to identify and understand changing conditions and determine how effective potential marketing strategies under consideration might be. The goal of this activity is for you to demonstrate an understanding of the market research process and different sources of information relevant to marketing by considering the application of concepts related to both in the context of a company-specific example. Marketers are usually the ones entrusted with scanning the environment for changes that might affect the organization. As a result, creating procedures that collect, analyze, and access relevant information is a critical part of marketing management. Staying connected to the business environment is no longer optional. Success is based, in part, on both the quality and quantity of information available to management. As a result, most companies engage in collecting, analyzing, and storing data from the macro environment on a continuous basis known as marketing intelligence. 1. According to the video, all marketing research design should be Multiple Choice reliable, repeatable, and statistically relevant. repeatable. affordable. reliable. 2. Experian’s marketing research would be considered Multiple Choice secondary and causal. primary and descriptive. secondary and quantitative. primary and causal. 3. By having such a large sample size, Experian hopes to achieve a sample that _______Blank of the overall population. Multiple Choice somewhat looks like is statistically representative "feels like" 4. The data collected by HitWise can be very valuable for making Multiple Choice content choices. partnerships. channel selection decisions. All of the answers are correct. 5. "Qualifying" a member of the sample ensures that the sample as a whole Multiple Choice only reflects certain demographic groups. stays representative of the population and isn’t otherwise skewed. takes more time to reach and costs more. stays small and manageable.
According to the information provided, the answer to question 1 would be "reliable." Marketing research design should aim to be reliable, ensuring that the data collected is accurate and consistent.
Experian's marketing research would likely be considered primary and descriptive. Primary research involves gathering new data specifically for the research objective, and descriptive research focuses on describing characteristics or phenomena. Experian's role as a provider of marketing research suggests they collect data directly from consumers or target audiences to gain insights.
By having a large sample size, Experian aims to achieve a sample that is statistically representative of the overall population. A large sample size helps reduce sampling error and increases the likelihood of obtaining results that reflect the characteristics of the broader population.
The data collected by HitWise can be valuable for making various decisions, such as content choices, partnerships, and channel selection. All of the given answers are correct as HitWise data can provide insights into consumer behavior, market trends, and competitor analysis, which can inform decision-making in different areas of marketing.
"Qualifying" a member of the sample ensures that the sample as a whole stays representative of the population and isn't otherwise skewed. This means that the sample selection process considers certain criteria or characteristics to ensure that it accurately represents the target population and avoids bias or distortion.
Learn more about Marketing here
https://brainly.com/question/25369230
#SPJ11
What are some of the successes, challenges and treatments for management of eating disorders in college students? How can colleges be helpful with respect to eating disorders
In college, the pressures to maintain an ideal body image and the stress of academic work can exacerbate eating disorders. Here are some successes, challenges, and treatments for eating disorders management in college students.Successes in eating disorders management in college students:
Successful management of eating disorders depends on early identification and intervention. If an eating disorder is detected early, treatment is more likely to be effective. This can prevent complications and reduce the severity of the disorder. Some of the successes of eating disorders management in college students include; early detection, professional support, and access to treatment. Also, college counseling services can provide support and a confidential space to talk to someone about their struggles.
Challenges in eating disorders management in college students:Eating disorders management in college students can be a complex process due to a variety of challenges. A few challenges faced by college students include; limited availability of specialized treatment centers, financial difficulties, and lack of understanding by family members and friends. Moreover, college students with eating disorders may feel self-conscious, embarrassed, or ashamed. This can lead to social isolation and can negatively impact their academic performance.
Treatments for eating disorders in college students:There are several treatments available to manage eating disorders in college students. Psychotherapy, nutritional counseling, and medications are the most common treatments used for eating disorders. Psychotherapy involves working with a mental health professional to identify and address the psychological factors that contribute to the disorder. Nutritional counseling can help individuals develop a healthy eating plan to meet their nutritional needs. Medications may be used to manage symptoms of depression, anxiety, and other mental health conditions that can accompany an eating disorder.
Here are a few ways colleges can help with respect to eating disorders:1. Raising awareness: Colleges can raise awareness about eating disorders through campaigns, training sessions, and support groups. This will help students recognize the symptoms of an eating disorder in themselves or their friends.2. Providing support services: Colleges can provide counseling and therapy services to help students cope with the psychological effects of eating disorders.3. Offering nutritional counseling: Colleges can offer nutritional counseling services to students to help them develop healthy eating habits.4. Promoting positive body image: Colleges can promote a positive body image by offering programs and events that focus on healthy living and self-acceptance.5. Encouraging healthy eating habits: Colleges can provide healthy food options on campus and promote healthy eating habits to help students maintain a balanced diet and avoid developing eating disorders.
To know more about Disorders visit-
brainly.com/question/31134261
#SPJ11
A bank completed an inspection of 8000 mortgage applications.
These mortgage applications revealed a total of 3540 errors.
Calculate DPU.
The DPU for the bank's mortgage applications is approximately 0.4425.
In this scenario, the DPU (Defects Per Unit) is calculated by dividing the total number of defects by the total number of units inspected. In this case, the total number of defects is given as 3540, and the total number of units, which are the mortgage applications inspected, is 8000.
To calculate the DPU, we divide the total number of defects (3540) by the total number of units (8000):
DPU = 3540 / 8000
This calculation gives us a DPU of approximately 0.4425. This means that, on average, there are approximately 0.4425 defects per mortgage application inspected.
The DPU is a useful metric in quality management as it provides a measure of the defect rate per unit. It helps organizations assess the level of quality or the number of errors in a given process or product. In this case, the DPU indicates the average number of errors found per mortgage application during the inspection process.
Learn more about bank's mortgage here:-
https://brainly.com/question/32276218
#SPJ11
On Dec 31, 2020, ABC Corp issued 4-year, 7% bonds with $2,000,000 as par value ABC Corp. received $2,240,000 in cash. The band interes pd semily on June 30 and December 31 every year. Ap Compute the following: Total bonds premium. Interest paid in cash semiannually. The Semiannual amortization amount of the bond premium. Total bonds interest expense over the 4 years. Activate Windows Question Moving to another question will save this response.
To compute the requested information, we need to use the given data and formulas for bond premium and interest expense.
Total bond premium:
The total bond premium is the difference between the cash received and the par value of the bonds.
Total bond premium = Cash received - Par value
Total bond premium = $2,240,000 - $2,000,000
Total bond premium = $240,000
Interest paid in cash semiannually:
The interest paid is calculated using the bond's par value and the stated interest rate.
Interest paid = Par value × Interest rate
Interest paid = $2,000,000 × 7% / 2 (since interest is paid semiannually)
Interest paid = $70,000
Semiannual amortization amount of the bond premium:
The bond premium is amortized evenly over the bond's term.
Semiannual amortization amount = Total bond premium / Number of periods
Semiannual amortization amount = $240,000 / (4 × 2) (since interest is paid semiannually)
Semiannual amortization amount = $15,000
Total bond interest expense over the 4 years:
The bond interest expense is the sum of the semiannual interest payments.
Total bond interest expense = Interest paid × Number of periods
Total bond interest expense = $70,000 × (4 × 2) (since interest is paid semiannually)
Total bond interest expense = $560,000
Learn more about premium here
https://brainly.com/question/16845751
#SPJ11
City University, Bangladesh started its operations in 2003 under the private University Act, 1992 (amended in 1998). It is one of the best quality higher education providers in Bangladesh. City University has a State of Art campus in Uttara. Additionally, it has one of the best e-learning platforms in Bangladesh. City University has around 6000 students and 250 employees. It faces competition from the top 10 private universities in Bangladesh. Usually, students consider the cost while they take admission to private universities, but education quality and student satisfaction are also considered.
Question:
a) Briefly describe the steps in the risk management process that should be followed by the risk manager of City University.
b) Identify the major loss exposures faced by City University.
c) For each of the loss exposures identified in (b), identify a risk management technique or combination of techniques that could be used to handle the exposure.
d) Describe several sources of funds for paying losses if retention is used in the risk management program.
e) Identify other departments in City University that would also be involved in the risk management program.
a) The risk management process for City University involves steps such as risk identification, assessment, mitigation, financing, and monitoring and review.
b) Major loss exposures faced by City University include property loss, liability risk, and reputation risk.
c) Risk management techniques for each exposure include implementing preventive measures, obtaining insurance coverage, and developing crisis management plans.
d) Sources of funds for paying losses if retention is used can include the operating budget, reserve funds, endowment or investment income, and grants or donations.
e) Other departments involved in the risk management program at City University include finance, legal, human resources, operations, and public relations/communications.
a) The risk management process that should be followed by the risk manager of City University typically involves the following steps:
1. Risk Identification: Identify and assess potential risks and loss exposures faced by the university, considering various aspects such as operations, finance, legal, and reputation.
2. Risk Assessment: Evaluate the likelihood and potential impact of each identified risk. Prioritize risks based on their severity and potential consequences.
3. Risk Mitigation: Develop strategies and implement measures to mitigate identified risks. This may involve implementing preventive controls, safety measures, and security protocols to reduce the likelihood and impact of risks.
4. Risk Financing: Determine the most appropriate risk financing techniques, such as insurance coverage or self-insurance, to transfer or retain the financial impact of certain risks.
5. Risk Monitoring and Review: Continuously monitor and review the effectiveness of risk management strategies and make necessary adjustments as new risks emerge or existing risks change.
b) The major loss exposures faced by City University may include:
1. Property Loss: Damage or loss to buildings, infrastructure, or assets due to natural disasters, accidents, or other incidents.
2. Liability Risk: Potential legal claims or lawsuits arising from accidents, injuries, or other liabilities related to the university's operations.
3. Reputation Risk: Damage to the university's reputation due to negative publicity, scandals, or other incidents that may impact its brand image and enrollment.
c) To handle the identified loss exposures, City University can consider the following risk management techniques:
1. Property Loss: Implementing risk mitigation measures like fire safety systems, regular inspections, and property insurance coverage to transfer the financial impact of property damage.
2. Liability Risk: Adopting risk prevention measures, such as implementing safety protocols and training programs, as well as obtaining liability insurance coverage to mitigate potential legal liabilities.
3. Reputation Risk: Developing a crisis management plan, establishing effective communication strategies, and investing in public relations efforts to address and mitigate reputational risks.
d) Several sources of funds for paying losses if retention is used in City University's risk management program can include:
1. Operating Budget: Allocating funds from the university's regular operating budget to cover potential losses or claims.
2. Reserve Funds: Establishing reserve funds specifically designated for addressing unexpected losses or risks.
3. Endowment or Investment Income: Utilizing income generated from endowments or investments to fund losses, if permitted by the university's financial policies.
4. Grants and Donations: Seeking external grants or donations specifically earmarked for risk management purposes.
e) Other departments in City University that would be involved in the risk management program may include:
1. Finance Department: Responsible for budgeting, allocating funds for risk management purposes, and assessing the financial implications of potential risks.
2. Legal Department: Provides guidance on legal matters, reviews contracts and agreements, and advises on compliance and risk mitigation strategies.
3. Human Resources Department: Involved in developing and implementing safety training programs, addressing employee-related risks, and ensuring compliance with employment laws and regulations.
4. Operations Department: Collaborates in identifying and mitigating operational risks, implementing safety measures, and maintaining business continuity plans.
5. Public Relations/Communications Department: Works closely with the risk management team to manage reputational risks and develop crisis communication strategies.
Learn more about crisis management plans here:-
https://brainly.com/question/31623615
#SPJ11
faulk corporation uses a process costing system for its two production departments: mixing and baking. the company provided the following manufacturing cost information for the month of june.
Faulk Corporation manufactures its products using a process costing system in which it produces two production departments, mixing and baking. The company provided the following information about manufacturing costs for the month of June:
:The manufacturing cost of a product includes all the expenses incurred in producing the product from raw materials to finished goods. Manufacturing costs include direct materials, direct labor, and manufacturing overhead. The manufacturing costs for the month of June are as follows:Direct Materials:
The direct materials cost for the mixing department is $84,000 and for the baking department is $96,000.Direct Labor: The direct labor cost for the mixing department is $42,000 and for the baking department is $48,000.Manufacturing Overhead: The manufacturing overhead cost for the mixing department is $21,000 and for the baking department is $24,000.Total manufacturing costs are the sum of : direct labor, and manufacturing overhead. For the mixing department, the total manufacturing cost is $147,000 ($84,000 + $42,000 + $21,000). Similarly, for the baking department, the total manufacturing cost is $168,000 ($96,000 + $48,000 + $24,000).
To know more about production visit:
https://brainly.com/question/30333196
#SPJ11
QS 13-15 (Algo) Computing profit margin and return on total assets LO P3 Edison Company reported the following for the current year: Net sales $ 91,000 67,000 Cost of goods sold Net income 21,840 Begi
To find the profit margin and return on total assets, the profit margin is 24% and the return on total assets is 20.7%.we need to compute the missing value of the total assets using the given information.
Therefore, the missing value is:$ Total\ assets = Beginning\ total\ assets + Net\ income\ - DividendsStep-by-step solution to QS 13-15 (Algo) Computing profit margin and return on total assets LO P3 Edison Company reported the following for the current year:Net sales $ 91,000Cost of goods sold 67,000Net income 21,840Beginning total assets are missing.Compute the missing value of the total assets using the given information:$ Total\ assets = Beginning\ total\ assets + Net\ income\ - Dividends$ \begin{aligned} 91{,}000 &= 67{,}000 + 21{,}840 + Dividends \\ 91{,}000 &= 88{,}840 + Dividends \\ 91{,}000 - 88{,}840 &= Dividends \\ 2{,}160 &= Dividends \end{aligned}
Therefore, dividends are $2,160.Compute profit margin and return on total assets as follows:$$ \text{Profit margin} = \frac{\text{Net income}}{\text{Net sales}} \times 100 \% $$$$ \text{Return on total assets} = \frac{\text{Net income}}{\text{Total assets}} \times 100 \% $$$$ \begin{aligned} \text{Profit margin} &= \frac{21{,}840}{91{,}000} \times 100 \% \\ &= 24 \% \\ \\ \text{Total assets} &= 85{,}680 + 21{,}840 - 2{,}160 \\ &= 105{,}360 \\ \\ \text{Return on total assets} &= \frac{21{,}840}{105{,}360} \times 100 \% \\ &= 20.7 \% \end{aligned} $$
To learn more about profit margin, visit here
https://brainly.com/question/32233225
#SPJ11
1. The EOQ . II . No. of opers in a year , and III . Time between two successive orders IV . Average yearly cost of Inventory V. Total inventory cost VI . Total Cost
The Economic Order Quantity (EOQ) is a calculation used to determine the optimal order quantity that minimizes inventory costs. It considers factors such as demand, ordering costs, and holding costs. The number of orders in a year can be calculated by dividing the annual demand by the EOQ.
The Economic Order Quantity EOQ can be calculated using the formula: EOQ = √[(2 × Annual Demand × Ordering Cost) / Holding Cost per Unit]. This formula considers the annual demand, ordering cost per order, and holding cost per unit. By calculating the EOQ, the optimal order quantity can be determined to minimize inventory costs. The number of orders in a year can be calculated by dividing the annual demand by the EOQ. This provides insight into how frequently orders need to be placed to meet the demand and maintain inventory levels. The time between two successive orders is the duration between placing an order and receiving the next order. It depends on factors such as lead time, order processing time, and supplier reliability. Understanding this time helps in managing inventory levels and ensuring timely replenishment.
The average yearly cost of inventory is calculated by multiplying the average inventory level by the holding cost per unit. It represents the cost of holding inventory for a year, including expenses such as storage, insurance, and obsolescence. The total inventory cost is the sum of the average yearly cost of inventory and the cost of ordering. It provides a comprehensive view of the expenses associated with maintaining inventory. Finally, the total cost is the sum of the total inventory cost and the cost of the actual inventory, taking into account both holding costs and ordering costs. This helps in evaluating the overall financial impact of inventory management on the organization.
Learn more about Economic Order Quantity here
https://brainly.com/question/28347878
#SPJ11
1. Your term project is an integrative summary of seven short papers.
2. Each paper that you read must be at least three pages long. For example, if you read a newspaper article that in only 2 pages long, it will not count as one of your papers.
3. For each paper that you read, you must summarize the paper in approximately one page, but usually about 3/4 page.
4. Each paper that you read must be preceded by a bibliographical citation.
5. After summarizing all the papers, you must write an Integrative Summary that ties all the papers together and demonstrate how they address a narrow topic. For example, How Pharmacies in England resisted resisted laws to limit the free distribution of addictive opium during the 19th Century.
These papers may be from the academic literature or current news on drug controls, the drug war, history of illicit or psychoactive drugs or drug policies from anywhere in the world. You may select articles from journal articles or working papers on Drug Policies, Economic Analysis, Economic Historical Analysis, Medical History, Scientific Analysis, International Diplomacy, and Social and Philosophical Analysis.
Finally, the documents you cite must include research papers, magazine articles, newspaper article or government policy documents published during the last 10 years.
Your bibliography topic must be narrow and specific. You cannot select papers that address the War on Drugs in general. An example of an acceptable topic could be "The Medellin Cartel: It's Rise and Fall" or Comparing the Methods of Pablo Escobar and Other Drug Gangs or How the Dutch Profited from the Trade in Opium and Why and When they Ceased to Trade in Opium
The bibliographical selection may address topics from the examples listed below or other topics that you may select:
• Comparative international policies
• Historical analysis of policies in different countries
• Socio-Economic analysis of drug policies
• Social and Psychological Issues of Drug Use and Policies
• The Politics and Economics the War on Drugs
• International Drug Cartels and their Activities / Violence and Corruption
• European colonialism and the drug trade in history
• Foreign Trade and the History of Drugs (Opium and Cocaine)
It seems like you are looking for a narrow and specific topic for your term project bibliography related to drug policies, drug trade, or drug control. Here are a few potential topics that you could consider:
"The Opioid Crisis in the United States: Causes, Consequences, and Policy Responses"
"The Legalization of Cannabis: Economic, Social, and Public Health Implications"
"Drug Policies in Portugal: Decriminalization and Public Health Approach"
"The Impact of Drug Trafficking on Central American Countries: Violence, Corruption, and Economic Consequences"
"Psychedelics Research and Therapeutic Potential: A Review of Recent Studies"
"International Drug Control Policies: A Comparative Analysis of Approaches"
"The Role of Harm Reduction Strategies in Reducing Drug-related Harms and Overdose Deaths"
Remember to narrow down your topic further based on your interests and the availability of recent research papers, articles, or policy documents. These topics should provide you with a starting point for finding relevant literature to fulfill the requirements of your term project.
To know more about Opioid Crisis in the United States click this link-
https://brainly.com/question/29566448
#SPJ11
Since March 2020 we've seen the sharpest recession ever, with the fastest, largest loss of employment since records have been kept. Followed by the Federal Re- serve and Congress using their policy tools to try to ameliorate the situation. In this final, I would like you to interpret these events through the models presented in class. 1. In the labor market, show the evolution of job vacancies. First look at the first Spring/Summer of the Recession, then this Fall. There are several measures, but the main one from a government statistical agency is "job openings" from JOLTS and is available on FRED. What should the change in vacancies have predicted about labor force status flow rates (i.e. job separations, St, or the job finding rate, ft). Should you look at the number of vacancies, or is there a particular ratio that'd be more informative for flow rates? Can you find evidence on flow rates that’re consistent or inconsistent with that prediction? For this, you probably want to use FRED. I would like to see at least two charts from the data, one showing vacancies (or that special ratio involving vacancies) and another showing the flow rate that you think should be predicted by that vacancy data. You should also explain why they are related.
IntroductionThe recession caused by the COVID-19 pandemic is the sharpest recession ever, with the fastest, largest loss of employment since records have been kept. As a result, the Federal Reserve and Congress employed their policy tools to improve the situation.
In this context, we must analyze these events through the models presented in class, with a focus on labor markets that show the evolution of job vacancies.Evolution of Job Vacancies in the Labor MarketJob vacancies' evolution in the labor market has a significant effect on labor force status flow rates such as job separations, St, or the job-finding rate, ft. Government statistical agencies' primary measure of job openings, JOLTS, is available on FRED. We should look at the change in vacancies' number to predict labor force status flow rates. However, a specific ratio is more informative in predicting flow rates. The ratio of unemployment rate to job vacancies rate helps predict flow rates more accurately.Consistency of Flow Rates and VacanciesThe FRED data has evidence on flow rates that are consistent or inconsistent with the predictions made using vacancy data. The data shows that labor market flows increased in June 2020 but remained below the pre-recession levels. The data also shows that the hiring rate improved from the end of April but remained lower than the level observed before the recession.Therefore, there is a relationship between the evolution of job vacancies and labor force status flow rates. The decline in job vacancies led to a decline in labor force status flow rates. The rise in job vacancies led to a rise in labor force status flow rates. It is evident that labor market flows are sensitive to changes in job vacancies. Below are two charts from FRED data:Chart 1: The graph shows the number of job openings. As expected, there was a decline in job openings during the Spring/Summer of the Recession and a rise during the Fall.Chart 2: The graph shows the job-finding rate, ft, and job separation rate, St. It is consistent with the prediction that a decline in job openings leads to a decline in labor force status flow rates. The graph shows that the job-finding rate declined, while the job separation rate increased during the Spring/Summer of the Recession. It is also consistent with the prediction that a rise in job openings leads to a rise in labor force status flow rates. The graph shows that the job-finding rate increased, while the job separation rate declined during the Fall.ConclusionIn conclusion, we have examined the labor market's evolution of job vacancies, predicting labor force status flow rates, and analyzed the consistency of flow rates and vacancies. The data from FRED shows that labor market flows are sensitive to changes in job vacancies. The decline in job vacancies led to a decline in labor force status flow rates. The rise in job vacancies led to a rise in labor force status flow rates.
To know more about evidence , visit ;
https://brainly.com/question/375033
#SPJ11
.Which of the following statements is correct?
A. The revaluation of non-current assets in the subsidiary’s records means that the subsidiary has adopted the cost model of accounting for those assets.
B. Revaluations of assets such as goodwill and inventory are not permitted in the accounting records of the subsidiary.
C. AASB 3 Business Combinations requires that any revaluations of a subsidiary’s assets at acquisition date must be done in the consolidation worksheet.
D. Inventory can be revalued to an amount greater than its cost in the records of the subsidiary.
The correct statement is:
D. Inventory can be revalued to an amount greater than its cost in the records of the subsidiary.
Revaluation of inventory is allowed in the accounting records of the subsidiary, and it can be revalued to an amount greater than its cost. This revaluation is done to reflect the fair value of the inventory and is in line with the principles of fair value accounting.
Learn more about fair value here:
https://brainly.com/question/30360568
#SPJ11
Explain the impact of four (4) case laws and statute on the development of auditing practices, standards and procedures.
Answer:
Planning (sometimes called Survey or Preliminary Review), Fieldwork, Audit Report and Follow-up Review. Client involvement is critical at each stage of the audit process.
Explanation:
Sources of evidence. Audit evidence may emanate from the following sources:
Types of evidence. Audit evidence may be physical, documentary, oral or analytical.
Corroboration. Different sources should be employed when collecting evidence to make it more persuasive.
Answer:
Explanation:the day sn
