what are the two factors determining the polarity of a molecule?

The volume of chloroform needed to extract 99.5% of a solute from 100 ml of water is 4.84 ml.

The formula for the partition coefficient is:

C1 / C2 = Kp

where, C1 = Concentration of solute in one solvent

C2 = Concentration of solute in the other solvent

Kp = Partition coefficient

As per the given data, the partition coefficient is CHCl[tex]_3[/tex] / CH[tex]_2[/tex]O-610.

Thus, the equation becomes: CHCl[tex]_3[/tex] / CH[tex]_2[/tex]O = 610

Also, we know that the volume of solute extracted is 99.5%. Therefore, the concentration of the solute left will be 0.5% of the initial concentration.

Hence, the concentration of the solute remaining in the water = (0.5 / 100) * Initial concentration

Now, let's assume that the initial concentration is 1.

Therefore, the concentration of the solute remaining in the water = (0.5 / 100) * 1 = 0.005

Now, we know that the total volume of the solution = volume of water + volume of chloroform

Thus, the volume of chloroform = Total volume - Volume of water

The volume of water is given as 100 ml. We need to find the total volume. Since 99.5% of the solute is extracted, the remaining solute in the water is 0.5% of the initial solute.

Therefore, the initial solute concentration = (100 / 0.5) = 20000

The total volume of the solution = Volume of water/concentration of solute in the water

= 100 / 20000

= 0.005 L

= 5 ml

Therefore, the volume of chloroform required = 5 - 100 / 610

= 5 - 0.16

= 4.84 ml

Hence, the volume of chloroform required to extract 99.5% of a solute from 100 ml of water, if the partition coefficient is CHCl[tex]_3[/tex] / CH[tex]_2[/tex]O-610 is 4.84 ml.

Learn more about partition coefficient here:

https://brainly.com/question/31607446

#SPJ11

The equilibrium constant (Kc) of a reaction refers to the ratio of the concentrations of the products of the reaction to the concentrations of the reactants when the reaction has reached equilibrium. The expression for Kc depends on the balanced chemical equation and the stoichiometric coefficients of the species in the reaction.

The equilibrium constant for the reaction H2(g) + CO2(g) → H2O(g) + CO(g) is given by the following expression: Kc = [H2O][CO] / [H2][CO2] where the square brackets represent the molar concentrations of the species at equilibrium. The coefficients from the balanced equation are used as exponents for the concentrations.

The units of Kc depend on the stoichiometry of the reaction, as each species has its own unit of concentration (usually moles per liter or molarity).The value of the equilibrium constant for this reaction depends on the temperature at which the reaction is occurring. At a given temperature, the value of Kc is constant, but changing the temperature can cause Kc to change. If the reaction is exothermic, increasing the temperature will cause Kc to decrease, while decreasing the temperature will cause Kc to increase.

If the reaction is endothermic, the opposite is true.Kc is a measure of the extent to which a reaction goes to completion. A large value of Kc indicates that the products are favored at equilibrium, while a small value of Kc indicates that the reactants are favored. If Kc is equal to one, the reaction is at equilibrium and the concentrations of the products and reactants are equal. If Kc is greater than one, the products are favored, and if Kc is less than one, the reactants are favored.

In this case, the equilibrium constant expression indicates that the products are favored, as the numerator is larger than the denominator.

To know more about equilibrium constant visit:

https://brainly.com/question/28559466

#SPJ11

Adding a 1.0 mL sample of (A) 1.0 M KF will increase the percent ionization of HF.

The equation for dissociation is shown below:

HF(aq) + H2O(l) ⇄ H3O+(aq) + F (aq)

The dissociation of HF in water, or any weak acid for that matter, is a dynamic equilibrium process. The equilibrium constant expression (Ka) for the dissociation of a weak acid is represented as follows:

Ka = [H3O+][A-] / [HA]

where [HA] is the concentration of the weak acid, [H3O+] is the concentration of hydronium ions produced, and [A-] is the concentration of the conjugate base produced.

There are several factors that can influence the percent ionization of a weak acid, including the concentration of the weak acid and the concentration of the conjugate base. When a strong acid is added to a weak acid solution, it will shift the equilibrium to the left, thereby decreasing the percent ionization.

Conversely, when a strong base is added to a weak acid solution, it will shift the equilibrium to the right, thereby increasing the percent ionization.In the given options, 1.0 M KF would increase the percent ionization of HF. This is because KF is a strong base that will react with the weak acid to form its conjugate base F-.

This will increase the concentration of the F- ions, which will shift the equilibrium to the right according to Le Chatelier's Principle.

As a result, the percent ionization of HF will increase. The correct option is (A).

Learn more about percent ionization at: https://brainly.com/question/14907187

#SPJ11

The amount of the radioactive material reaction remaining after a certain period of time can be determined using the formula:Nt = N0(1/2)t/t₁/₂where:Nt = remaining amount of the radioactive material after the elapsed time, t.

N0 = the initial amount of the radioactive material, t₁/₂ = half-life period of the material. Therefore, the answer is 12.5 g (to three significant figures).

Given,Initial amount, N0 = 100.0 gHalf-life, t₁/₂ = 2.4 minutes Elapsed time, t = 7.2 minutesThe formula to calculate the remaining amount is:Nt = N0(1/2)t/t₁/₂Substituting the values:Nt = 100.0 g (1/2)^(7.2/2.4)Nt = 100.0 g (1/2)³Nt = 100.0 g (0.125)Nt = 12.5 gThe amount of Zn-71 remaining after 7.2 minutes has elapsed is 12.5 g.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

The neutralization reactions for each given acid and base pair are:

HClO4(aq) + NaOH(aq) -> NaClO4(aq) + H2O(l)

2HBr(aq) + Ca(OH)2(aq) -> CaBr2(aq) + 2H2O(l)

a. The neutralization reaction between HClO4(aq) and NaOH(aq) can be represented as follows:

HClO4(aq) + NaOH(aq) -> NaClO4(aq) + H2O(l)

In this reaction, a base (NaOH) and an acid (HClO4) combine to form a salt (NaClO4) and water (H2O). The phases denoted are liquid water and aqueous solutions, respectively (aq and l).

b. The neutralization reaction between HBr(aq) and Ca(OH)2(aq) can be represented as follows:

2HBr(aq) + Ca(OH)2(aq) -> CaBr2(aq) + 2H2O(l)

Two molecules of the acid (HBr) and one molecule of the base (Ca(OH)2) interact in this reaction to form the salt (CaBr2) and two molecules of water (H2O). The phases denoted are liquid water and aqueous solutions, respectively (aq and l).

To learn more about neutralization, visit:

https://brainly.com/question/27745033

#SPJ11

The Haber process for the industrial synthesis of ammonia is nonspontaneous under standard conditions at [tex]25^0C[/tex], with a negative standard entropy change. The changeover from nonspontaneous to spontaneous occurs at a higher temperature.

The Haber process involves the synthesis of ammonia (NH3) from nitrogen gas (N2) and hydrogen gas (H2). The given values indicate that the standard enthalpy change (Δ[tex]H^0[/tex]) for the reaction is -92.2 kJ, indicating an exothermic reaction. However, the standard entropy change (Δ[tex]S^0[/tex]) is -199 J/K, which suggests a decrease in the randomness or disorder of the system.

To determine whether the process is spontaneous or nonspontaneous under standard conditions at [tex]25^0C[/tex], we can use the Gibbs free energy equation: Δ[tex]G^0[/tex] = Δ[tex]H^0[/tex] - TΔ[tex]S^0[/tex], where Δ[tex]G^0[/tex] is the standard free energy change and T is the temperature in Kelvin. Since Δ[tex]S^0[/tex] is negative, the sign of Δ[tex]G^0[/tex] will depend on the temperature.

At lower temperatures, the negative Δ[tex]S^0[/tex] dominates and makes the process nonspontaneous. However, as the temperature increases, the positive TΔ[tex]S^0[/tex] term becomes more significant, eventually overcoming the negative Δ[tex]H^0[/tex] term and making the process spontaneous.

To find the temperature at which the changeover occurs, we need to solve the equation Δ[tex]G^0[/tex] = 0. Rearranging the equation and substituting the values, we get 0 = -92.2 kJ - T(-199 J/K). Solving for T gives us T ≈ [tex]464^0C[/tex], which is the temperature at which the process changes from nonspontaneous to spontaneous under standard conditions.

Learn more about the Haber process here:

https://brainly.com/question/30928282

#SPJ11

The pH of an aqueous solution can be calculated using the pH scale, which is a logarithmic scale that ranges from 0 to 14.

A solution with a pH of 7 is considered neutral, while solutions with pH values less than 7 are considered acidic and solutions with pH values greater than 7 are considered basic. The pH is calculated using the formula pH = 14 - pOH, where pOH is the negative logarithm of the hydroxide ion concentration [OH-]. Given that an aqueous solution at 25 has a pOH of 4.5, we can calculate the pH as follows: pOH = 4.5[OH-] = 10^-4.5[OH-] = 3.16 x 10^-5 (since 10^-4.5 = 3.16 x 10^-5).

Using the formula pH = 14 - pOH, we can substitute in the value for pOH and calculate the pH: pH = 14 - 4.5pH = 9.5. Therefore, the pH of the aqueous solution is 9.5 when the pOH is 4.5. The pH of the solution can also be considered basic because its pH value is greater than 7.

To know more about aqueous solution refer to:

https://brainly.com/question/19587902

SPJ11

The volume of 0.25 M hydrochloric acid (HCl) solution that contains 0.15 mol HCl is 0.6 L.

A molarity is a concentration unit for a solution represented by mol/L. It is determined by dividing the moles of solute by the volume of the solution in liters. Therefore;0.25 M = 0.25 moles of HCl per L of solutionNow, let's assume the volume of the solution is V.

The number of moles of HCl in this volume of the solution would be the product of its molarity and volume. i.e.,0.25 V moles of HClWe also know that the number of moles of HCl is 0.15. Therefore;0.25 V = 0.15Solving for V;V = 0.15 / 0.25V = 0.6 LTherefore, the volume of 0.25 M hydrochloric acid (HCl) solution that contains 0.15 mol HCl is 0.6 L.

To know more about hydrochloric acid visit:

https://brainly.com/question/14519330

#SPJ11

Ksp solubility product constant for Ca3(AsO4)2 is 5.4×10−19. The given information is that the solubility of calcium arsenate (Ca3(AsO4)2) in water is 0.032 g/L. We are required to find the Ksp of the salt.

The equilibrium constant for the dissolution of sparingly soluble (insoluble) salts in an aqueous solution. The molar mass of Ca3(AsO4)2 is 398.078 g/mol. Calculate the solubility (in mol/L) of calcium arsenate using the given data as follows; Solubility of Ca3(AsO4)2 in water = 0.032 g/L Molar mass of Ca3(AsO4)2 = 398.078 g/mol. Number of moles = 0.032/398.078 = 8.04×10−5 mol/L.

The dissolution of Ca3(AsO4)2 (s) in water is given by the equation; Ca3(AsO4)2 (s) ⇌ 3Ca2+ (aq) + 2AsO42− (aq)The solubility product expression for Ca3(AsO4)2 is given as; Ksp = [Ca2+]3[AsO42−]2 The molar solubility (x) of Ca3(AsO4)2 is 8.04×10−5 mol/L.

To know more about Ca3 visit:

https://brainly.com/question/23847870

#SPJ11

As the speed of vibration of molecules increases, the property of temperature increases. Temperature is a measure of the average kinetic energy of the molecules in a substance.

When the speed of vibration of molecules increases, it means that the kinetic energy of the molecules has increased. This increase in kinetic energy results in an increase in temperature.

Temperature is related to the average speed of molecules in a substance. As the speed of vibration of molecules increases, the average speed of the molecules also increases. The kinetic energy of the molecules is directly proportional to their speed. Therefore, when the speed of vibration increases, the kinetic energy, and temperature of the substance also increase.

Furthermore, an increase in temperature affects other properties of a substance. For example, an increase in temperature can lead to an increase in the substance's energy content. This increase in energy can manifest as heat, which is the transfer of energy from a higher-temperature region to a lower-temperature region. So, when the speed of vibration of molecules increases, not only does the temperature increase but there can also be an increase in energy and the generation of heat.

Learn more about molecules here:

https://brainly.com/question/32298217

#SPJ11

The given problem can be solved by applying the solubility product concept. It states that the product of the concentration of ions raised to their power in the solubility equation is equal to the solubility product constant (Ksp).

The main answer of this problem is 2.1 × 10^−15 and the  is given below.What is the solubility product (Ksp) for Ag2SO3?The solubility product (Ksp) of Ag2SO3 is given as 1.5 x 10^-15.Most compounds are partially soluble, implying that they dissolve in water to some extent. If we know how much of a compound dissolves, we can determine how much of it will remain undissolved. Ksp is a measure of a compound's solubility equilibrium.The formula for the solubility product (Ksp) is given as; Ksp = [Ag+]^2 [SO3-]^1This equation can be used to solve for the concentration of Ag2SO3 in a solution if the solubility product constant is given.

The balanced chemical equation for the dissociation of Ag2SO3 in water is given as; Ag2SO3(s) ⇌ 2 Ag+(aq) + SO3 2-(aq)From the equation, we see that the concentration of Ag+ is 2.80 x 10^-3 M. Thus, [Ag+] = 2.80 x 10^-3 MSince Ag2SO3 is sparingly soluble in water, the concentration of Ag+ is equal to twice the concentration of SO3^2- because of the balanced chemical equation. Hence, [SO3^2-] = 0.5 [Ag+] = 0.5 (2.80 x 10^-3 M) = 1.40 x 10^-3 MThe value of [Ag+] and [SO3^2-] can be substituted in the solubility product expression; Ksp = [Ag+]^2 [SO3^2-]Ksp = (2.80 x 10^-3 M)^2 (1.40 x 10^-3 M)Ksp = 2.1 x 10^-15Therefore, the concentration of SO3^2- that is in equilibrium with Ag2SO3(s) and 2.80 x 10^-3 M Ag+ is 1.40 x 10^-3 M.

To know more about solubility visit:

https://brainly.com/question/31493083

#SPJ11

The volume of 32.0 g of SO2 gas at 20.0°C and 125 torr is 33.2 L (liters). We are given the following: Mass of SO2 gas = 32.0 g. Temperature of SO2 gas = 20.0°CPressure of SO2 gas = 125 torr.

We need to find the volume of SO2 gas at the given temperature and pressure. To calculate the volume of the gas, we will use the ideal gas law equation: PV = nRT where, P is the pressure of the gas V is the volume of the gas n is the number of moles of the gas R is the universal gas constant T is the temperature of the gas. In the given problem, we know the pressure, temperature, and mass of the gas.

We can use the mass to find the number of moles using the molar mass of SO2 gas, which is 64.06 g/mol. Number of moles of SO2 gas = Mass of SO2 gas / Molar mass of SO2 gas= 32.0 g / 64.06 g/mol= 0.4997 mol. Now we can use the ideal gas law equation to find the volume of SO2 gas. V = nRT / P. Substituting the known values, V = (0.4997 mol) (0.0821 L·atm/mol·K) (20.0°C + 273.15) / (125 torr).

Therefore, the volume of 32.0 g of SO2 gas at 20.0°C and 125 torr is 33.2 L (liters).

To know more about volume, refer

https://brainly.com/question/14197390

#SPJ11

The balanced half-reaction equation of the oxidation of SO₃²⁻ in a basic solution is:

The balanced half-reaction for the oxidation of SO3 in a basic solution can be represented as follows:

SO₃²⁻ -----> SO₄²⁻ + e-

To balance the oxygen atoms, we need to add 4 OH- ions on the right-hand side:

SO₃²⁻ + 4 OH⁻ ----> SO₄²⁻ + H₂O + e-

Now, to balance the charges, we add electrons, 6e-, on the left-hand side:

6 SO₃²⁻ + 4 OH⁻ ----> 6 SO₄²⁻ + H₂O + 6 e--

The final balanced half-reaction in a basic solution for the oxidation of SO3 is:

6 SO₃²⁻ + 4 OH⁻ ----> 6 SO₄²⁻ + H₂O + 6 e-

Learn more about oxidation reactions at: https://brainly.com/question/6816739

#SPJ4

Number of moles of KI = 16 moles Therefore, the number of moles of Pb(NO3)2 required to react with 16 moles of

KI would be 16/2 = 8 moles of Pb(NO3)2.

Hence, the correct option is b. 8.

The balanced equation of the given chemical reaction is:

(aq) -> Pb(NO3)2 (aq) + 2K1 Pb)2(a + 2KNO3 (aq)

Here,

1 mole of Pb(NO3)2

would react with 2 moles of KI.Number of moles of KI = 16 moles Therefore, the number of moles of

Pb(NO3)2

required to react with 16 moles of KI would be

16/2 = 8 moles of Pb(NO3)2.

Hence, the correct option is b. 8.

To know more about moles visit:

https://brainly.com/question/15209553

#SPJ11

The strongest acid is e. p-nitrobenzoic acid.

To determine the strongest acid among the given compounds, we need to consider the stability of the corresponding conjugate base. The stronger the acid, the more stable its conjugate base.

Let's analyze each compound:

a. m-methylbenzoic acid: The presence of an electron-donating methyl group (-CH₃) attached to the benzene ring stabilizes the conjugate base by dispersing the negative charge. Therefore, it is weaker than benzoic acid (with no substituents), making it a weaker acid.

b. m-methoxybenzoic acid: The methoxy group (-OCH₃) is also an electron-donating group, similar to the methyl group. It stabilizes the conjugate base, making it weaker than benzoic acid as well.

c. water: Water (H₂O) can act as an acid by donating a proton (H⁺), but compared to the carboxylic acids in the other options, water is a weaker acid.

d. p-bromobenzoic acid: The presence of a bromine atom (-Br) does not have a significant effect on the acidity compared to benzoic acid.

e. p-nitrobenzoic acid: The nitro group (-NO₂) is an electron-withdrawing group, which destabilizes the conjugate base by withdrawing electron density. This electron-withdrawing effect makes p-nitrobenzoic acid more acidic than the other options.

Therefore, among the given compounds, the strongest acid is e. p-nitrobenzoic acid.

Learn more about strongest acid at https://brainly.com/question/16616073

#SPJ11

Approximately 1.693 grams of calcium will be produced when 4.7 grams of calcium chloride are completely used up in the reaction.

To determine the grams of calcium produced, we need to calculate the molar ratio between calcium chloride (CaCl2) and calcium (Ca) in the balanced chemical equation for the reaction. The balanced equation is:

2Al + 3CaCl2 → 3Ca + 2AlCl3

From the balanced equation, we can see that for every 3 moles of calcium chloride, 3 moles of calcium are produced. We need to convert the given mass of calcium chloride (4.7 grams) to moles using its molar mass.The molar mass of CaCl2 is calculated by adding the atomic masses of calcium (Ca) and chlorine (Cl). The atomic mass of calcium is 40.08 g/mol, and the atomic mass of chlorine is 35.45 g/mol.

Molar mass of CaCl2 = (40.08 g/mol) + 2(35.45 g/mol) = 110.98 g/mol

Now we can calculate the moles of calcium chloride:

Moles of CaCl2 = (mass of CaCl2) / (molar mass of CaCl2)

              = 4.7 g / 110.98 g/mol

              ≈ 0.0423 mol

Since the molar ratio between calcium chloride and calcium is 3:3, the moles of calcium produced will be equal to the moles of calcium chloride used.

Moles of Ca = 0.0423 mol

To convert moles of calcium to grams, we multiply by the molar mass of calcium:

Mass of Ca = (moles of Ca) × (molar mass of Ca)

          = 0.0423 mol × 40.08 g/mol

          ≈ 1.693 g

for such more questions on reaction

https://brainly.com/question/24795637

#SPJ8

Part A: [OH-] = 0.17 M, [H3O+] = 0 M.

Part B: pH is undefined (or very high/basic), pOH ≈ 0.77.

Part A:

For a 0.17 M NaOH solution, we can determine the concentration of hydroxide ions ([OH-]) by considering the stoichiometry of the NaOH dissociation reaction, which is as follows:

NaOH → Na+ + OH-

Since NaOH is a strong base, it fully dissociates in water, producing one mole of hydroxide ions for every mole of NaOH.

Therefore, the concentration of [OH-] in the 0.17 M NaOH solution is 0.17 M.

As NaOH is a strong base, it completely reacts with water to produce hydroxide ions, resulting in negligible concentration of hydronium ions ([H3O+]).

Hence, the concentration of [H3O+] in the 0.17 M NaOH solution is essentially 0 M.

Part B:

The pH of a solution can be determined using the equation: pH = -log[H3O+]. Since [H3O+] is negligible in a 0.17 M NaOH solution, the pH is undefined or considered to be very high (basic).

The pOH of a solution can be calculated using the equation: pOH = -log[OH-]. In this case, the concentration of [OH-] is 0.17 M. Therefore, the pOH can be calculated as follows:

pOH = -log(0.17) ≈ 0.77

Note that since the solution is a strong base, the pOH value will be low (basic) and the pH value will be high (basic).

for more questions on pOH

https://brainly.com/question/3994941

#SPJ8

Neutral atoms of tin and germanium would be isoelectronic with Sn2 and Sn4 ions. The electron configuration shorthand notation of the neutral atoms is [Kr]5s²4d¹⁰5p².

Isoelectronic refers to two or more atoms or ions with the same number of electrons. Sn2 and Sn4 ions have 50 and 48 electrons respectively. Neutral atoms of tin and germanium have 50 and 32 electrons respectively which is equal to Sn2 ion. However, for the Sn4 ion, two electrons need to be removed, which makes the neutral tin atom isoelectronic with Sn4 ion.

The electronic configuration of Sn2+ ion is [Kr]4d¹⁰5s²5p⁰. The electronic configuration of Sn4+ ion is [Kr]4d¹⁰5s²5p⁰. The electronic configuration of a neutral tin atom is [Kr]5s²4d¹⁰5p². The electronic configuration of a neutral germanium atom is [Ar]3d¹⁰4s²4p².

To know more about atoms visit:

https://brainly.com/question/1566330

#SPJ11

The strongest base among the given options is option (B) with a Kb value of 0.07, indicating a higher concentration of hydroxide ions. Option B is the strongest base based on Kb values.

To determine the strongest base based on the given Kb values, we need to compare the values of Kb. The Kb value represents the equilibrium constant for the reaction of a base with water to form hydroxide ions (OH⁻).

Comparing the given Kb values:

A. 4.1 × 10⁻⁴

B. 0.07

C. 6.7 × 10⁻³

D. 4.9 × 10⁻⁹

A higher Kb value indicates a stronger base because it corresponds to a larger concentration of hydroxide ions at equilibrium. Therefore, the base with the highest Kb value is the strongest.

From the given options, the base with the highest Kb value is option B, with a Kb value of 0.07. This indicates that option B is the strongest base among the given choices.

In summary, option B, with a Kb value of 0.07, corresponds to the strongest base among the provided options.

To know more about the Kb value refer here :

https://brainly.com/question/16816808#

#SPJ11

Sulfur hexafluoride ([tex]SF_6[/tex]) and disulfur tetrafluoride ([tex]S_2F_4[/tex]) are both chemical compounds containing sulfur and fluorine, but they differ in their molecular structures and properties.

[tex]SF_6[/tex] is a colorless, odorless gas with a six-membered sulfur-fluorine ring, while [tex]S_2F_4[/tex] is a yellow solid with a four-membered sulfur-fluorine ring. [tex]SF_6[/tex] is highly stable and non-reactive, making it useful in electrical insulation and as a tracer gas in industrial processes. On the other hand, [tex]S_2F_4[/tex] is a highly reactive compound, easily decomposing and releasing toxic gases upon exposure to moisture or heat.

It is primarily used as a chemical intermediate in the synthesis of other fluorine-containing compounds. In summary, [tex]SF_6[/tex]is a stable gas with electrical insulating properties, while [tex]S_2F_4[/tex] is a reactive solid used in chemical synthesis.

Learn more about sulfur hexafluoride here:

https://brainly.com/question/8073966

#SPJ11

The mass of 5.86 × 10²¹ atoms of arsenic is approximately 7.28 grams.

Avogadro's number (Nₐ) represents the number of atoms or molecules in one mole of a substance, and its value is approximately 6.022 × 10²³.

Given,

Molar mass of arsenic = 74.92 g/mol

Mass of one atom of arsenic = Molar mass / Avogadro's number

= 74.92 g/mol / (6.022 × 10²³ atoms/mol)

Mass of 5.86 × 10²¹ atoms of arsenic = (Mass of one atom of arsenic) × (5.86 × 10²¹ atoms)

Mass of one atom of arsenic = 74.92 g/mol / (6.022 × 10²³ atoms/mol)

= 1.244 × 10⁻²² g

Mass of 5.86 × 10²¹ atoms of arsenic = (1.244 × 10⁻²² g) × (5.86 × 10²¹ atoms) = 7.28 g

Learn more about mass, here:

https://brainly.com/question/20552052

#SPJ4

The correct answer for balanced reaction is : Cr = 1, Cl2 = 3

To balance the redox reaction in basic solution, we need to ensure that the number of electrons gained and lost are equal and that the charges are balanced. Here is the balanced equation:

Cr(s) + 3Cl2(g) + 6OH-(aq) → Cr(OH)3(s) + 6Cl-(aq)

In this balanced equation, the coefficients in front of Cr and Cl2 are:

Cr = 1, Cl2 = 3

The balanced equation shows that 1 mole of Cr reacts with 3 moles of Cl2 to form 1 mole of Cr(OH)3 and 6 moles of Cl-. The coefficients are chosen to balance the charges and the number of atoms on both sides of the equation.

Therefore, the correct answer is:

Cr = 1, Cl2 = 3

for more questions on balanced
https://brainly.com/question/11904811
#SPJ8

The correct answer for the addition of 7.5 g + 2.26 g + 1.311 g + 2 g is 13.071 g.

To arrive at this answer, we add the given values together:

7.5 g + 2.26 g + 1.311 g + 2 g = 13.071 g.

In this case, all the values provided have three decimal places, so the sum is also expressed with three decimal places. Therefore, the correct answer is 13.071 g.It is important to maintain the same level of precision as the least precise value given in the problem, which in this case is 1.311 g. Rounding the answer to 13 g or 13.0 g would result in a loss of #SPJ8 and could lead to an inaccurate representation of the total mass.Therefore, 13.071 g is the correct answer because it accurately reflects the sum of the given values and maintains the appropriate level of precision.

for such more questions on addition

https://brainly.com/question/1433809

#SPJ8

The aqueous LIBr solution is formed by the dissolution of LIBr in water. The water molecules pull the ions present at the surface of the solid into solution, where the hydration process surrounds the separate ions with water molecules.

This process is described below:

LIBr is an ionic compound that is solid at room temperature. When LIB r is dissolved in water, it dissociates into its constituent ions, Li+ and Br-.

The Li+ and Br- ions are hydrated by water molecules as they enter the solution. The hydration process involves the surrounding of each ion with water molecules. The water molecules orient themselves around the ion in a specific manner, with the partially positive hydrogen atoms pointing towards the anion and the partially negative oxygen atoms pointing towards the cation.

This orientation is due to the partial charges present in the water molecule.

To know more about dissolution of LIBr refer to:

https://brainly.com/question/14233299

#SPJ11

One mole of any substance is defined as the amount of that substance containing Avogadro's number (6.0²² × 10²³) of particles (atoms, molecules, or ions).

The amount of substance in moles can be calculated by dividing the number of particles by Avogadro's number. Therefore, to calculate the number of moles of Cu in 1.51 × 10²² atoms of Cu, we need to divide 1.51 × 10²² by Avogadro's number. Here's the calculation: 1 mole of Cu contains 6.0²² × 10²³ atoms of Cu. Hence, 1.51 × 10²² atoms of Cu would contain (1.51 × 10²²)/ (6.0²² × 10²³) = 0.025 moles of Cu. Therefore, there are 0.025 moles of Cu present in 1.51 × 10²² atoms of Cu. The given number of atoms of Cu can be converted into the number of moles of Cu by using Avogadro's number. The number of atoms in one mole is defined as Avogadro's number which is 6.0²² × 10²³ atoms per mole.

Therefore, the number of moles of Cu present in 1.51 × 10²² atoms of Cu is: Number of moles of Cu = Number of atoms of Cu/Avogadro's number= 1.51 × 10²² /6.0²² × 10²³ = 0.0251 moles. Therefore, there are 0.0251 moles of Cu present in 1.51 × 10²² atoms of Cu.

To know more about Avogadro's number visit:-

https://brainly.com/question/28812626

#SPJ11

The oxidation state of the highlighted atoms in the chemical species are:

Fe in Fe₂O₃(s) is +3

Cr in CrO₄²⁻ (aq) is +4

K in K⁺ is +1

O in OH⁻ is -2.

The oxidation number (or oxidation state) of an atom in a chemical species is a measure of the atom's apparent charge or the distribution of its valence electrons.

It indicates the degree of electron loss or gain by an atom in a compound or ion.

The oxidation number is represented by a positive or negative integer and is assigned based on a set of rules and guidelines.

In Fe₂O₃(s), the highlighted atom is Fe, and its oxidation state is +3.

In CrO₄⁻ (aq), the highlighted atom is Cr, and its oxidation state is +4.

In K⁺, the highlighted atom is K, and its oxidation state is +1.

In OH⁻, the highlighted atom is O and the oxidation state is -2

Learn more about oxidation state at: https://brainly.com/question/25551544
#SPJ4

The order of acidity can be determined by ranking the pH of each solution in increasing order. The solution with the lowest pH is the most acidic, while the solution with the highest pH is the least acidic.

The order of acidity can be determined by ranking the pH of each solution in increasing order. The solution with the lowest pH is the most acidic, while the solution with the highest pH is the least acidic. Here is the order of acidity for the given solutions:

Most acidic: [HCl] -0.15 M pH 0.00 [CH3COOH] -0.15 M pH 2.87 CH3COOH is an acidic solution. pH-7.45 is a neutral solution. Least acidic: CH3COO- is approximately 1.0% ionized at this concentration. The pH of a solution can be determined using the following formula: pH = -log[H+], where [H+] is the concentration of hydrogen ions in the solution.

To know more about pH visit: https://brainly.com/question/2288405

#SPJ11

We can substitute the chemical formula for 4-bromoaniline in this equation and obtain the final answer as:

C6H4BrNH2 + H2O ⇌ C6H4BrNH3+ + OH-Kb = [C6H4BrNH3+][OH-]/[C6H4BrNH2]

Thus, the left-hand side of the given equilibrium constant equation is

C6H4BrNH2

and the complete equation is

:C6H4BrNH2 = Kb

The equilibrium constant (Kb) is used to define the basicity of a compound. When we talk about basicity, it refers to the ability of a compound to take a proton (H+) from another molecule. Here, we need to complete the equation for the equilibrium constant of 4-bromoaniline, a weak base, with water. We know that the reaction of 4-bromoaniline with water takes the following form:

C6H4BrNH2 + H2O ⇌ C6H4BrNH3+ + OH-

We can now write the expression for the Kb of 4-bromoaniline as follows:

Kb = [C6H4BrNH3+][OH-]/[C6H4BrNH2]

We can substitute the chemical formula for 4-bromoaniline in this equation and obtain the final answer as:

C6H4BrNH2 + H2O ⇌ C6H4BrNH3+ + OH-Kb = [C6H4BrNH3+][OH-]/[C6H4BrNH2]

Thus, the left-hand side of the given equilibrium constant equation is

C6H4BrNH2

and the complete equation is:

C6H4BrNH2 = Kb

To know more about bromoaniline visit:

https://brainly.com/question/30978866

#SPJ11

The correct arrangement is: E 2 1 3 4, which corresponds to option (E) 2134. The compounds can be arranged in decreasing acidity order as follows:

CF₃COOH (trifluoroacetic acid)

CCI COOH (chloroacetic acid)

CH₃COOH (acetic acid)

CH₃CH₂OH (ethanol)

To arrange the compounds in order of decreasing acidity, we need to consider the strength of their conjugate bases. The stronger the acid, the weaker its conjugate base.

Let's analyze the compounds:

1. CH₃COOH (acetic acid): This is a weak acid.

2. CH₃CH₂OH (ethanol): This is not an acid; it is a neutral compound.

3. CF₃COOH (trifluoroacetic acid): This is a stronger acid than acetic acid due to the presence of the electron-withdrawing trifluoromethyl group (-CF₃).

4. CCI COOH (chloroacetic acid): This is a stronger acid than acetic acid due to the presence of the electron-withdrawing chlorine atom (-Cl).

Based on this analysis, we can arrange the compounds in decreasing acidity order as follows:

E. 2 (CH₃CH₂OH)

D. 4 (CCI COOH)

C. 1 (CH₃COOH)

B. 3 (CF₃COOH)

To know more about the acidity order refer here :

https://brainly.com/question/30371948#

#SPJ11

The balanced equation of the reaction is 2Na + Cl2 ⟶ 2NaCl. It shows that 2 moles of sodium reacts with 1 mole of chlorine to form 2 moles of NaCl.

Therefore, the number of moles of Na required for the reaction can be calculated as shown below:Number of moles of NaCl = Mass/Molar massMolar mass of NaCl = 23 + 35.5 = 58.5 g/mol Number of moles of NaCl = 200/58.5 = 3.42 molesFrom the balanced equation, 2 moles of Na reacts with 1 mole of Cl2 to form 2 moles of NaCl. Therefore, the number of moles of Cl2 required for the reaction is 1

Mole of Cl2 ⟶ 2 moles of NaCl3.42 moles of NaCl ⟶ (1/2) x 3.42 = 1.71 moles of Cl2 Mass of Cl2 = Number of moles × Molar mass = 1.71 × 70.9 = 121.23 gThe mass of Na required to react with excess chlorine is given by the difference in the masses of Na and NaCl, which is:Mass of Na = 3.42 moles × 23 g/mol = 78.66 gSince the number of significant figures in the given mass of Na is three, the mass of Na required is 78.7 g. Therefore, the correct option is B. 78.65 g Na.

To know more about equation visit :

https://brainly.com/question/29657983

#SPJ11