Answer:
I Choosed:
A. They can end up as waste products that sometimes can’t be recycled.
B. They sometimes release toxins into the environment.
C. They use materials from Earth that are nonrenewable.
Explanation:
A. Synthetic polymers, such as plastic, can end up as waste in landfills, oceans, and other natural areas. This can cause a variety of environmental problems, as some types of plastic do not break down easily and can persist in the environment for decades or even centuries. This accumulation of waste can have negative impacts on wildlife, ecosystems, and human health.
B. Some synthetic polymers are made using harmful chemicals that can leach out and release toxins into the environment. These toxins can have negative impacts on wildlife, ecosystems, and human health. For example, some types of plastic contain chemicals such as bisphenol-A (BPA) that have been linked to hormone disruption and other health problems.
C. The production of synthetic polymers often requires the use of nonrenewable resources, such as petroleum and natural gas. These resources are finite and their extraction and processing can cause environmental damage, including air and water pollution and habitat destruction. The continued use of these nonrenewable resources can exacerbate environmental problems and contribute to climate change.
These are three ways that synthetic polymers can affect the environment, and it's important to consider the impacts of these materials in order to minimize their negative effects and promote sustainability.
sodium ion concentration in the cytoplasm of a neuron __________ when its sodium channels open.
The sodium ion concentration in the cytoplasm of a neuron increases when its sodium channels open.
This is because the opening of the sodium channels allows for the influx of sodium ions into the cytoplasm, leading to an increase in the content-loaded sodium ion concentration within the cell. As a result, the cytoplasm becomes more positively charged, which can lead to the generation of an action potential and the transmission of a nerve impulse.
The sodium channel itself is the membrane protein that conducts sodium ions (Na⁺) through a cell membrane. It is highly selective to transport sodium ions, which it achieves by encapsulation of the ion in a cavity of a larger molecule.
Learn more about sodium channels at https://brainly.com/question/15905781
#SPJ11
question 2
pls help asap
According to the question, Copper (II) nitrate, Cu(NO3)2 is the limiting reactant.
What is limiting reactant?
A limiting reactant, also known as a limiting reagent, is a reactant that limits the amount of product that can be produced in a chemical reaction. It is typically the reactant that is used up first in the reaction, preventing any further reaction from occurring. The limiting reactant is also referred to as the “rate-determining” reagent, because its depletion determines the rate at which the chemical reaction proceeds. In a chemical reaction, the amount of product formed is determined by the amount of limiting reactant that is available. When the limiting reactant is used up, the reaction stops, regardless of whether other reactants are present or not. In order to determine the limiting reactant, one must calculate the moles of each reactant and compare the values to determine which one is used up first. Once the limiting reactant is known, the theoretical yield of the reaction can be determined.
To learn more about limiting reactant
https://brainly.com/question/14222359
#SPJ1
propane gas is to be compressed irreversibly from 5 bar and 323 k to 15 bar and 343 k in an adiabatic compressor in a petrochemical plant. calculate the work required per mole of propane using
The work input per mole of propane passing through the compressor If Propane obeys the Redlich-Kwong equation of state is 676.9 J/mol.
The Redlich – Kwong equation of state is an empirical, algebraic equation that relates temperature, pressure, and volume of feasts. It's generally more accurate than the van der Waals equation and the ideal gas equation at temperatures above the critical temperature. It was formulated by Otto Redlich and Joseph Neng Shun Kwong in 1949.
Tc = 369.9K
Pc = 42.5bar
W = 0.123
Cp = 29.595+0.838x10⁻₁ + 3.256 x 10⁻⁴ - 3.958 x 10⁻⁷ + 13.129 x 10⁻¹¹
Now given system is Adiabatic compressor
ΔH = Q +W [Q = 0]
ΔH = W
State1: T1 = 323K, P1 = 5bar
Tr = T/Tc = 323/369.9 = 0.873
Pr = P/Pc = 5/42.5 = 0.118
Redlich-Kwong equation of state is,
ΔH = RT2[Z2 - 1 -3/2 A2/B2 ln(1+B2/Z2)]
A1 = 0.42748x0.118/(0.873)².⁵
= 0.071
B1 = 0.08664x0.118/0.873
= 0.012
ΔH = W =(8.314)(343)[0.830-1-3/2(0.182/0.033)lm(1+0.033/0.830)]
ΔH = 676.9J/mol
Work input is 676.9 J/mol.
Learn more about Compression:
https://brainly.com/question/14245086
#SPJ4
Complete question:
Propane gas is to be compressed irreversibly from 5 bar and 323 K to 15 bar and 343 K by an adiabatic compressor in a petrochemical plant. Calculate the work input per mole of propane passing through the compressor If Propane obeys the Redlich-Kwong equation of state.
HELPPP plss thankyou
based on the information from the periodic table, which mistake did darrell make on his diagram? a nitrogen should have six electrons instead of seven. b nitrogen should have eight protons instead of six. c nitrogen should have seven protons instead of six. d nitrogen should have eight electrons instead of seven.
Nitrogen is 7th element in periodic table. It contains 7 electrons and 7 protons .Hence, nitrogen should have seven protons instead of six.
What is nitrogen ?Nitrogen is 7th element in periodic table. It is located in the 15th group of p -block in periodic table. Nitrogen exists in the gaseous state thus it is a non-metallic element.
The atomic number of an element is the number of electrons in its atom in the neutral state. For a neutral atom, the number of electrons is equal to the number of protons of the atom.
Hence, nitrogen has the atomic number of 7 implies it contains 7 electrons and 7 protons. Therefore, nitrogen should have seven protons instead of six.
Find more on nitrogen:
https://brainly.com/question/16113371
#SPJ1
if 0.25 mol of br2 and 0.25 mol of cl2 are introduced into a 3.0 l container at 400 k, what is the equilibrium concentration (in m) of brcl?
Introducing 0.25 mol of br2 and 0.25 mol of cl2 into a 3.0 l container at 400 k results in the 0.096 M of equilibrium concentration of BrCl
The reaction for the formation of BrCl from Br2 and Cl2 is:
Br2(g) + Cl2(g) ⇌ 2BrCl(g)
The equilibrium constant expression for the above reaction is:
Kc = ([[tex]BrCl^{2}[/tex]]) / ([Br2][Cl2])
where [BrCl], [Br2], and [Cl2] are the equilibrium concentrations of the respective species in the reaction.
Since we have 0.25 mol of both Br2 and Cl2 in a 3.0 L container, the initial concentration of each is:
[Br2] = 0.25 mol / 3.0 L = 0.083 M
[Cl2] = 0.25 mol / 3.0 L = 0.083 M
At equilibrium, let's assume that the concentration of BrCl is x M. Therefore, the equilibrium concentration of Br2 and Cl2 will be (0.083 - x) M, since each mole of Br2 and Cl2 produces 2 moles of BrCl.
Kc = ([[tex]BrCl^{2}[/tex]]) / ([Br2][Cl2])
At equilibrium, Kc will have a certain value at the given temperature. For this problem, let's assume Kc =2.0 x [tex]10^{-2}[/tex] (which is an estimated value based on literature values at 400 K). Solving for x, we get:
2.0 x [tex]10^{-2}[/tex] = [tex]x^{2}[/tex] / [[tex](0.083 - x)^{2}[/tex]]
x = 0.096 M
Therefore, the equilibrium concentration of BrCl is 0.096 M.
Learn more about equilibrium concentration here:
https://brainly.com/question/15557078
#SPJ4
3. Read the entire laboratory activity. Form a hypothesis
about what observable products will indicate that a
double-replacement reaction has gone to completion.
Record your hypothesis in the next column.
A possible hypothesis on the observable products indicating that the reaction has gone to completion could be:
In a double-replacement reaction, two ionic compounds will exchange their positive and negative ions to form new ionic compounds. The reaction can be considered complete when the formation of a solid precipitate, gas evolution, or a change in temperature or color is observed.What is a double-replacement reaction?A double-replacement reaction is a type of chemical reaction that occurs between two ionic compounds in which the cations and anions of the two compounds switch partners to form two new ionic compounds.
In other words, the cations of one compound exchange places with the anions of the other compound. The general form of a double-replacement reaction can be written as AB + CD -> AD + CB, where A and B are the cations of the two original compounds and C and D are the anions of the two original compounds.
Learn more on double-replacement reaction here: https://brainly.com/question/23918356
#SPJ1
Two students, Will N. Andable and Ben Pumpiniron, are in the weightlifting room. Will
lifts the 100 lb barbell over his head 10 times in one minute; Ben lifts the 100 lb pound
barbell over his head 10 times in 10 seconds. Which student does the most work? Which
student delivers the most power? Explain your answers.
Both students do the same amount of work since they lifted the barbell over their heads the same number of times.
Ben developed more power because he took less time to do the same amount of work.
What is the formula for calculating mechanical power?The formula for calculating mechanical power is given below as follows:
Power = force * distance/time taken
The power of each of the students is calculated as follows:
Assuming the work done by both students is approximated to the weight of the barbell, the power developed by each student will depend only on the time.
Power developed by Will:
Will lifts the 100 lb barbell over his head 10 times in one minute
Ben lifts the 100 lb pound barbell over his head 10 times in 10 seconds
The time taken by Ben to lift the 100 lb pound barbell over his head 10 times in 10 seconds is less than the time taken by Will to lift the 100 lb pound barbell over his head 10 times in 10 seconds, Hence, Ben developed more power.
Learn more about mechanical power at: https://brainly.com/question/24443465
#SPJ1
Stoichiometry
2. Balance the equation
Name:
1. Given this equation: N₂ +_______ H₂ →NH,, balance it and write the following molar ratios:
a)
N₂/H₂
b)
Ng/NH,
c) Hạ / NH,
a) Li,N/H,O
b)
N₂ + 3H₂ →2NH[tex]_3[/tex] is the balanced equation. A balanced equation is indeed a chemical reaction equation.
What is balanced equation?A balanced equation is indeed a chemical reaction equation in which the overall charge and the amount of atoms for every element inside the reaction are the same for both the products and reactants.
In plenty of other terms, the mass as well as charge across both endpoints of the reaction are balanced.
N₂ + H₂ →NH[tex]_3[/tex]
Number of atom of nitrogen on reactant side is 2 while on product side it is 1.
N₂ + H₂ →2NH[tex]_3[/tex]
Number of atom of hydrogen on reactant side is 2 while on product side it is 6.
N₂ + 3H₂ →2NH[tex]_3[/tex]
Therefore, N₂ + 3H₂ →2NH[tex]_3[/tex] is the balanced equation.
To learn more about balanced equation, here:
https://brainly.com/question/29764227
#SPJ6
you have a substance that turns violet when biuret is added, black when iodine is added, no change with benedict's reagent, and leaves no oily spot on a brown paper bag. given the above information, what csn conclude about this substance?
From the observations we can conclude that the substance contains protein and starch.
The different observations are given below:
Biuret - Violet (Violet color represents +ve for proteins)
Iodine - Black (Black color represents +ve for starch)
Benedicts - no change ( No change in color represent -ve due to absent of reducing sugar)
Sudan VI- (-ve as there is not lipid)
So, these results strongly suggest that substance is having protein and starch and showing positive test for these macromolecules in the sample as violet color for in biuret test and black while using iodine.
Therefore, assuming all the observations we can conclude that the substance contains protein and starch.
Learn more about biuret from the link given below.
https://brainly.com/question/14422731
#SPJ4
an 8-l cylinder contains air at 300 kpa and 300 k. now air is compressed isothermally to a volume of 2 l. the work done on air during this compression process is
The work done on air during the compression process is 3.327 KJ in 8l piston-cylinder device which contains air at 300 kpa and 300 k.
The formula for calculating work is given as,
W = Fd
P1 = 300k pa ,
V1 = 8L
V2 = 2L
Temperature remains constant so this means it is a isothermal process
For any isothermal process
P1V1 = P2V2
We know that work for isothermal process is given as,
W = P1V1 ln P1/P2
Now by substituting the values
W = 300 × 8 × 10⁻³ ln 2/8
W = -3.327 KJ
Negative sign in work done indicates the process is compression,
W = 3.327 KJ
Hence, work done on air during this compression process is 3.327 KJ
Learn more about work done from the link given below.
https://brainly.com/question/13796116
#SPJ4
when measuring liquids in a graduated cylinder your eye level should be parallel to the level of the? your answer should be one word and not case sensitive (upper and lower case does not matter).
Your eye level should be parallel to the level of the meniscus when measuring liquids in a graduated cylinder.
While measuring liquids in a graduated cylinder, it is critical to keep your eye level in the line up with the level of the meniscus. The meniscus is the bent surface of the fluid that structures at the highest point of the fluid in the graduated chamber.
This bent surface can make the fluid level seem higher or lower than it really is, contingent upon the place where it is seen. By keeping your eye level line up with the meniscus, you can kill any parallax mistake and get a more precise estimation. To peruse the volume of the fluid precisely, you ought to ensure the lower part of the meniscus is at the graduation line on the chamber.
Learn more about meniscus:
https://brainly.com/question/30335396
#SPJ4
Which quantity describes how spread out a set of data is?
A. Percent error
B. Line of best fit
C. Standard deviation
D. Mean
Standard deviation is a quantity which describes how spread out a set of data is.
What is standard deviation?A standard deviation (or σ) is a measure of how dispersed the data is in relation to the mean. Low standard deviation means data are clustered around the mean, and high standard deviation indicates data are more spread out.
A standard deviation close to zero indicates that data points are close to the mean, whereas a high or low standard deviation indicates data points are respectively above or below the mean. Standard deviation is a statistic that measures the dispersion of a dataset relative to its mean and is calculated as the square root of the variance.
Learn more about standard deviation,here:
https://brainly.com/question/16555520
#SPJ1
What type of fault has the geologist found?
what types of intermolecular forces are exhibited by each compound?
The types of intermolecular forces exhibited by a compound depend on the nature of the individual molecules and their molecular geometry.
In general, there are three main types of intermolecular forces:
London dispersion forces: These are the weakest type of intermolecular force and are present in all molecules. They arise due to temporary fluctuations in electron density, resulting in the formation of instantaneous dipoles. London dispersion forces increase with increasing molecular size and surface area.Dipole-dipole interactions: These occur between molecules with permanent dipoles, such as polar covalent compounds. The positive end of one dipole is attracted to the negative end of another dipole, leading to a net attractive force. Dipole-dipole interactions are stronger than London dispersion forces.Hydrogen bonding: This is a special type of dipole-dipole interaction that occurs between molecules containing hydrogen atoms bonded to highly electronegative atoms such as nitrogen, oxygen, or fluorine. Hydrogen bonding is a particularly strong type of intermolecular force due to the large electronegativity difference between hydrogen and these other atoms.Here are examples of compounds and the types of intermolecular forces they exhibit:
Water (H2O): Water is a polar covalent compound with a bent molecular geometry. It exhibits both hydrogen bonding and dipole-dipole interactions.Carbon dioxide (CO2): Carbon dioxide is a nonpolar molecule with a linear molecular geometry. It exhibits only London dispersion forces.Ethanol (C2H5OH): Ethanol is a polar covalent compound with a bent molecular geometry. It exhibits both hydrogen bonding and dipole-dipole interactions.Methane (CH4): Methane is a nonpolar molecule with a tetrahedral molecular geometry. It exhibits only London dispersion forces.To learn more about intermolecular forces refer to this link
https://brainly.com/question/9007693
#SPJ4
I need help with 9-13
1) Hydrogen: 1.5 g / 1.008 g/mol = 1.488 mol.
2) Atomic hydrogen: 1.488 mol / 0.999 mol = 1.5
3) As a result, the empirical formula is C2 H3, and the mole ratio is 2: 3.
C₂H₃
What is an element?Primitive human societies first discovered native minerals like carbon, sulfur, copper, and gold.
This is where the history of the elements' discovery and use began (though the concept of a chemical element was not yet understood).
Throughout human history, attempts to categorize things like this gave rise to the concepts of classical elements, alchemy, and numerous related hypotheses.
The work of Dmitri Mendeleev, a Russian chemist who produced the first recognizable periodic table in 1869, contributed significantly to modern knowledge of the elements.
The elements are arranged in this table according to increasing atomic number into rows (or "periods") and columns (or "groups") that have similar physical and chemical characteristics on a regular basis.
To know more about elements, click the link given below:
brainly.com/question/13025901
#SPJ1
the reaction of 3.30 g of aluminum with excess of hcl produced 10.5 g of alcl3. what is the percent yield for the alcl3?
The reaction of 3.30 g of aluminum with excess of hcl produced 10.5 g of alcl3.Percent yield of AlCl3 is [tex]13.0[/tex]%
Theoretical yield is the amount of product that is expected to be produced during a chemical reaction, based on the amount of reactants used. It is calculated by using the balanced equation of the reaction and the amount of reactants used. The theoretical yield is usually expressed in moles or grams.
Theoretical yield of AlCl3
[tex]3.30 g Al * \frac{1 mol Al}{26.982 g Al }*\frac{3 mol AlCl3}{1 mol Al }\\\\= 0.608 mol AlCl3[/tex]
Theoretical yield of AlCl3
[tex]= 0.608 mol AlCl3 *\frac{133.34 g AlCl3}{1 mol AlCl3 }\\= 81.1 g AlCl3[/tex]
A chemical reaction's efficiency is gauged by its percent yield.It is calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying it by 100. The theoretical yield is the amount of product that would be produced if all the reactants were completely converted to products.
Percent yield of AlCl3 =[tex]\frac{ Actual yield}{Theoretical yield}* 100%[/tex]%
= [tex]\frac{10.5 g AlCl3}{81.1 g AlCl3}*[/tex] 100%
= [tex]13.0[/tex]%
Therefore,Percent yield of AlCl3 is [tex]13.0[/tex]%
learn more Theoretical yield Refer:brainly.com/question/14966377
#SPJ4
which one of the following is an intensive property? question 4 options: number of moles nk of substance k in the system. the product pv in a system. molar enthalpy hm of a system (defined as the ratio of the enthalpy of the system over the total number of moles in the system). volume v of the system. internal energy u of the system
Enthalpy molar is an intense property of a system is its Hm, which is calculated as the system's enthalpy divided by the sum of its moles. Hence, option D is the correct answer.
A thermodynamic feature known as an intense property does not depend on the mass of a system. Pressure, temperature, density, particular volume, specific internal energy, specific enthalpy, and specific entropy are a few examples of intense properties. A property is called as an extensive property which depends on the quantity of the materials in a sample.
Mass and volume are two examples of extensive qualities. Intense properties are those that are unaffected by the substance's concentration. For example, temperature and pressure are strong characteristics. Enthalpy, energy, and volume are all significant qualities. Contrarily, intensive qualities, such as colour, melting point, boiling point, electrical conductivity, and physical state at a certain temperature, are independent of the amount of the substance present.
Learn more about Intensive properties here: https://brainly.com/question/4091052
#SPJ4
Correct Question:
Which one of the following is an intensive property?
(A) Internal energy U of a system.
(B) Volume V of a system.
(C) Number of moles [tex]n_{k}[/tex] of a substance k in a system.
(D) Molar enthalpy Hm of a system (defined as the ratio of the enthalpy of the system over the total number of moles in the system).
(E) The product pV for a system.
A reaction and its experimentally determined rate law are represented above. A chemist proposes two different possible mechanisms for the reaction, which are given below.
Mechanism 1
X2 → 2 X (slow)
X + Y2 → XY2 (fast) X + XY2 → X2Y2 (fast)
Mechanism 2
X2 → 2 X (slow)
X + Y2 → XY + Y (fast) X + XY → X2Y (fast)
X2Y + Y → X2Y2 (fast) Based on the information above, which of the following is true?Both mechanism 1 and 2 are consistent with the rate law.Only mechanism 2 is consistent with the rate law.Neither mechanism 1 nor mechanism 2 is consistent with the rate law.Only mechanism 1 is consistent with the rate law
Based on the information above, the following statement is true - Both mechanism 1 and 2 are consistent with the rate law.
The series of fundamental processes via which a chemical reaction takes place is known as a reaction mechanism. A multistep or complex reaction is one that involves two or more simple processes. A chemical species that is produced in one fundamental stage of a reaction and destroyed in the next is referred to as an intermediate. The rate-determining step is the one that moves the most slowly in a reaction system. The rate-determining phase establishes the rate law for the entire response by limiting the total rate.
Here is more information about rate law: brainly.com/question/16981791
#SPJ4
ASAP
A carbon atom has a relative atomic mass of 13. 60% of the carbon atom has a mass number of 12.4, 30% of the carbon atoms have a mass number of 13.1, whilst the remaining 10% have a mass number which is not known.
Calculate the mass number of the carbon isotope which is 10% of the Carbon 13 atom.
Give your answer to 1 decimal place, if needed.
Answer:
16.3.
Explanation:
The average atomic mass of an element is calculated by weighing each isotope present and multiplying it by its percent abundance, and then adding all the values.
First, we'll find the weighted average of the isotopes present in 60% and 30% of the Carbon 13 atom:
0.6 * 12.4 + 0.3 * 13.1 = 7.44 + 3.93 = 11.37
Next, we'll subtract the weighted average of these two isotopes from the relative atomic mass of carbon:
13.0 - 11.37 = 1.63
This is the weighted average of the isotope present in the remaining 10% of the Carbon 13 atom. To find the mass number, we'll divide the weighted average by the atomic weight of the isotope:
1.63 / 0.1 = 16.3
So, the mass number of the carbon isotope present in 10% of the Carbon 13 atom is approximately 16.3.
Assertion: Hydrogen is not used as fuel even though it has high calorific value.
Reason: Combustion of hydrogen is explosion.
Hydrogen has a high calorific value, meaning that it can produce a lot of energy when burned.
What is high calorific value?
High calorific value (HCV) is the amount of energy released when a fuel is burned. It is measured in joules or kilojoules per kilogram of fuel, and is used to compare different types of fuel. HCV is important, because it helps to determine the efficiency of a fuel, as well as its cost effectiveness. The higher the HCV, the more energy a fuel will produce from a given amount, making it cost effective and efficient. Different fuels have different HCV values, and the higher the HCV, the more efficient the fuel is.
However, it is not used as a fuel due to its explosive nature. When hydrogen combusts, it produces large amounts of heat and light in a very short period of time. This can cause an explosion if the reaction is not properly controlled. Therefore, hydrogen is not used as a fuel in most applications due to safety concerns.
To learn more about high calorific value
https://brainly.com/question/29429802
#SPJ1
19. 50 cc of N/2 HCl and 10 cc of 2N H₂SO4 solutions are mixed with 0.4 g of NaOH. Calculate the normality of resulting mixture. [0.583N]
The normality of the resulting mixture is 0.583N.
What is the Normality of a mixture?The normality is described as the number of gram or mole equivalents of solute present in one liter of a solution.
How to calculate the normality:
First, let's calculate the number of moles of NaOH in 0.4 g of the compound:
Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol
Number of moles of NaOH = 0.4 g / 40 g/mol = 0.01 mol
Next, we need to calculate the total number of acid equivalents in the mixture of HCl and H₂SO4:
Number of acid equivalents of HCl = (50 cc / 1000) L x (N/2) = 0.025 N LNumber of acid equivalents of H₂SO4 = (10 cc / 1000) L x (2N) = 0.02 N LTotal number of acid equivalents = 0.025 N L + 0.02 N L = 0.045 N LSince NaOH is a strong base and reacts completely with the acid, the number of moles of NaOH is equal to the number of acid equivalents in the mixture.
Therefore, the normality of the resulting mixture is:
Normality = number of acid equivalents / volume of the mixture in liters
Normality = 0.045 N L / ((50 + 10) cc / 1000) L = 0.583 N
So the normality of the resulting mixture is 0.583N.
Read more about chemical mixtures here:
https://brainly.com/question/24647756
#SPJ1
what will be the most likely change in ph when the h ions in the solution is increased to twice its original concentration
The most likely change in pH when the H+ ions in the solution is increased to twice its original concentration is from 9.5 to 6.5.
This is because the pH of a solution is a measure of the concentration of H+ ions in the solution, and if the concentration is doubled, the pH will decrease. This can be shown mathematically using the equation pH = -log[H+]. For example, if the original concentration of H+ ions is 10^-9.5 moles/liter, then the pH will be 9.5. If the concentration of H+ ions is doubled to 10^-9 moles/liter, then the pH will become 6.5 (-log[10^-9]).
learn more about pH Refer:brainly.com/question/16001508
#SPJ4
complete question:What will be the most likely change in pH when the H+ ions in the solution is increased to twice its original concentration?
5.0 to 2.5
4.0 to 2.0
1.6 to 1.3
9.5 to 6.5
chlorous acid has a ka of 1.2 x 10-2 and hypochlorous acid has a ka of 3.5 x 10-8 . you have a 0.10 m solution of chlorous acid and a second solution that is 0.10 m in hypochlorous acid. which solution will have the lowest ph? explain your reasoning.
We must compare the acid dissociation constants (Ka) of chlorous acid and hypochlorous acid to determine which solution has the lowest pH.
A solution's acidity or basicity is determined by its pH. It is a logarithmic scale with a neutral value of 7 and a range from 0 to 14. Acidic solutions have a pH below 7, while basic solutions have a pH over 7. The volume of hydrogen ions (H+) that are present in a solution determines its pH. Whereas a higher H+ concentration causes a lower pH and more acidity, a lower H+ concentration causes a higher pH and more basicity. In many industries and biological processes, maintaining the right pH level is crucial because an improper pH can harm materials and living things.
Learn more about pH here:
https://brainly.com/question/29255339
#SPJ4
Significant figures are important because they indicatea. the accuracy of the conversion factorb. the accuracy of the measurementc. the number of digits on a calculator =d. the precision of measuremente. the number of measurements
Significant figures are important because they indicate the precision of measurement. In scientific measurement, number of significant figures in a measurement is a way to communicate the precision or degree of uncertainty associated with that measurement.
The more significant figures a measurement has, the more precise the measurement is considered to be. Significant figures also help ensure that calculations and conversions are carried out with the appropriate degree of precision and avoid the appearance of false precision in the results.
When performing calculations, it is important to consider the number of significant figures in each number and to round the final result to the appropriate number of significant figures. This helps to ensure that the result is not reported with a degree of precision that is not supported by the data.
Learn more about significant figures here: brainly.com/question/24491627
#SPJ4
elect The Appropriate Pipette To Use For Each Of The Following Volumes.- 874 mL, 57 ML, 340 mL, 15 mL a. P1000 -B. P200 C.P20 - -
For 874 mL you should use a P1000 pipette;For 57 mL, 340 mL you should use a P200 pipette;For 15 mL you should use a P20 pipette.
For 874 mL you should use a P1000 pipette. This is because the P1000 has a maximum volume capacity of 1000 mL, so it can easily accommodate the 874 mL volume.
For 57 mL you should use a P200 pipette. This is because the P200 has a maximum volume capacity of 200 mL, so it can easily accommodate the 57 mL volume.
For 340 mL you should use a P200 pipette. This is because the P200 has a maximum volume capacity of 200 mL, so it can easily accommodate the 340 mL volume.
For 15 mL you should use a P20 pipette. This is because the P20 has a maximum volume capacity of 20 mL, so it can easily accommodate the 15 mL volume.
learn more about pipette Refer:brainly.com/question/28839494
#SPJ4
What are some possible areas in the homeland at school
where energy usage can be easily reduced?
Write 4 sentence explaining
Answer:
1. Shower instead of bathing.
2. When you leave the room, turn off everything.
3. Grow a Tree
4. Bicycle or walk to school.
Explanation:
As global temperatures rise, wildfires, droughts, and increased electrical consumption place strain on the country's energy system. Severe weather is the main cause of power outages and fuel supply disruptions in the United States. And, because energy generation is one of the greatest producers of CO2 to the climate, people and students alike must have the information and abilities to comprehend the issues, create and execute solutions, and advocate for change.
what is the percent abundance (in units of percent) of zinc in a sample whose density is 7.796 g/ml and the only other component is copper? the density for pure copper is 8.96 g/cm3 and the density of pure zinc is 7.13 g/cm3. report your answer to one decimal place.
The percent abundance of zinc is approximately 73.8%, a sample whose density is 7.796 g/ml and the density for pure copper is 8.96 g/cm3 and the density of pure zinc is 7.13 g/cm3.
What do you mean by the density ?The term density is defined as the measurement of how tightly a material is packed together.
It is also defined as the mass per unit volume.
Formula: ρ = m/V,
where ρ is the density, m is the mass of the object and V is the volume of the object.
Density of mixture = (density of copper)(percent abundance of copper) + (density of zinc)(percent abundance of zinc)
Now, Converting the densities to consistent units, we have:
density of mixture
= (8.96 g/cm³)(0.01)(100 - x) + (7.13 g/cm³)(0.01)(x)
By simplifying and converting to g/mL, we get:
density of mixture = 0.0896 g/mL (100 - x) + 0.0713 g/mL (x)
density of mixture = 0.0896 g/mL (100) - 0.0896 g/mL (x) + 0.0713 g/mL (x)
density of mixture = 8.96 g/mL - 0.0183 g/mL (x)
Then, we can use the given density of the mixture (7.13 g/mL) to solve for x:
7.13 g/mL = 8.96 g/mL - 0.0183 g/mL (x)
0.0183 g/mL (x) = 1.35 g/mL
x = 73.8
Thus, the percent abundance of zinc is approximately 73.8%.
To learn more about the density, follow the link;
https://brainly.com/question/29775886
#SPJ1
If we protect the special spaces of deserts, grasslands, and forests, then the animal and plant species will bounce back. true or false
True, protecting special spaces of deserts, grasslands, and forests can help restore the habitats of animals and plant species.
What is species?A species is a distinct group of organisms that are capable of interbreeding and producing fertile offspring. A species is identified by its unique set of characteristics, which distinguish it from other species. Species exist in many different environments, from the depths of the ocean floor to the tops of the tallest mountains. They are the basis of biological diversity and are a fundamental unit of classification in the field of biology. Species help define an ecosystem and the roles that each organism plays within the system. They are also an important source of food for many species, both predators and prey.
To learn more about species
https://brainly.com/question/29330415
#SPJ1
you are experimenting with blood samples and you place a drop of rbcs into a solution of 100 millimoles of cacl2. what effect does this have on the rbcs?
You are experimenting with blood samples and you place a drop of rbcs into a solution of 100 millimoles of CaCl2, there is no efect on RBCs.
The reason why the cell would shrink further in CaCl2 result is because it has a advanced van't Hoff factor i.e. total number of separated ionic species per solute patch( it is 2 for NaCl whereas it's 3 for CaCl2).
Nonionic solutes don't disconnect and will thus have a van't Hoff factor of 1)
Bibulous pressure( and other colligative parcels) are commensurable to van't Hoff factor. thus bibulous pressure in CaCl2 result will be3/2 times of that in an equimolar NaCl result.
Note that the ionic chemical eventuality isn't what drives osmosis; it's the discriminational attention of water( or any other detergent) that drives it.
Learn more about RBCs:
https://brainly.com/question/14639342
#SPJ4
