What converts nitrogen into a usable substance during the nitrogen cycle?

Question options:

decomposers


nitrogen-fixing bacteria


legumes


consumers

HELPING PEOPLE IN NEED:

What Converts Nitrogen Into A Usable Substance During The Nitrogen Cycle?Question Options:decomposersnitrogen-fixing

Answers

Answer 1

Answer:

B. nitrogen-fixing bacteria

Explanation:

Nitrogen is converted from atmospheric nitrogen (N2) into usable forms such as NO2-,

In a process known as fixation. The majority of nitrogen is fixed by bacteria, most of which are symbiotic with plants.

Recently fixed ammonia is then converted to biologically useful forms by specialized bacteria.


Related Questions

Is salt water a homogeneous mixture or a heterogeneous mixture

Answers

salt water is a homogeneous mixture

Which two of the following atoms are unstable and are likely to form a chemical bond?

Select one:
a. I and II
b. II and III
c. II and IV
d. III and IV

Answers

Answer:c.ll and Iv. Ihope this helped

Please answer this question if you are sure!
What is the pH of a buffer prepared by adding 30.0 mL of 0.15 M
HC2H3O2 (acetic acid) to 70.0 mL of 0.20 M NaC2H3O2 (sodium acetate)?

Answers

The pH of the buffer solution prepared by adding 30.0 mL of 0.15 M HC2H3O2 and 70.0 mL of 0.20 M NaC2H3O2 is approximately 5.25.

To determine the pH of the buffer solution, we need to consider the Henderson-Hasselbalch equation, which is commonly used for buffer systems.

The Henderson-Hasselbalch equation is given by:

pH = pKa + log([A-]/[HA])

In this case, acetic acid (HC2H3O2) is a weak acid, and its conjugate base is sodium acetate (C2H3O2-). To calculate the pH, we need to find the pKa of acetic acid.

The pKa value for acetic acid is approximately 4.76.

Now, let's calculate the concentrations of the acetic acid ([HA]) and acetate ion ([A-]) in the buffer solution.

[HA] = (moles of HC2H3O2) / (total volume of the solution in liters)

[HA] = (0.15 M) * (0.030 L) / (0.030 L + 0.070 L) = 0.045 M

[A-] = (moles of NaC2H3O2) / (total volume of the solution in liters)

[A-] = (0.20 M) * (0.070 L) / (0.030 L + 0.070 L) = 0.140 M

Now, substitute the values into the Henderson-Hasselbalch equation:

pH = 4.76 + log(0.140/0.045)

pH = 4.76 + log(3.11)

pH ≈ 4.76 + 0.49

pH ≈ 5.25

Therefore, the pH of the buffer solution prepared by adding 30.0 mL of 0.15 M HC2H3O2 and 70.0 mL of 0.20 M NaC2H3O2 is approximately 5.25.

For more question on solution

https://brainly.com/question/25326161

#SPJ8

You want to dissolve some sugar cubes as quickly as possible in a cup of tea. Suggest two ways you can do that. ​

Answers

To dissolve sugar cubes quickly in a cup of tea, here are two effective methods you can try:Stirring and Crushing, Hot Water Pre-Dissolution.

Stirring and Crushing:

a. Start by placing the sugar cube(s) into the cup of tea. The larger the sugar cubes, the longer they will take to dissolve.

b. Use a spoon or a stirring rod to vigorously stir the tea. The stirring action increases the contact between the sugar cubes and the hot liquid, helping to speed up the dissolution process.

c. While stirring, apply some pressure to the sugar cubes against the walls or base of the cup. This helps to break down the cubes into smaller pieces, exposing more surface area to the tea. Crush the cubes with the back of the spoon or the stirring rod.

d. Continue stirring until all the sugar is dissolved. You can test by observing whether any sugar crystals are visible on the spoon or at the bottom of the cup. If needed, stir a bit longer or crush any remaining sugar crystals.

Hot Water Pre-Dissolution:

a. Fill a separate cup with hot water, ensuring it is hot enough to dissolve the sugar cubes completely.

b. Place the sugar cubes in the hot water and stir until they are fully dissolved. This pre-dissolves the sugar cubes, making it easier and quicker for them to dissolve in the tea.

c. Once the sugar cubes are dissolved in the hot water, pour the sugar solution into your cup of tea.

d. Stir the tea briefly to ensure any remaining undissolved sugar is incorporated.

e. The pre-dissolved sugar solution will mix more readily with the tea, accelerating the overall dissolution process.

For more such question on dissolve visit:

https://brainly.com/question/6319922

#SPJ8

Calculate the volume of oxygen consumed at SATP (25 °C, 100kPa) by the combustion of 10.4 kg of propane, C3H8.

Answers

The combustion of 10.4 kg of propane consumes 23.9 L of oxygen at SATP (25 °C, 100 kPa) according to calculations based on the balanced chemical equation.

The balanced chemical equation for the combustion of propane [tex](C_3H_8)[/tex] is [tex]C_3H_8(g) + 5O_2(g) \rightarrow 3CO_2(g) + 4H_2O(l)[/tex]. We are to calculate the volume of oxygen consumed at SATP (25 °C, 100kPa) by the combustion of 10.4 kg of propane, [tex]C_3H_8[/tex]. We can start by calculating the moles of [tex]C_3H_8[/tex] used in the reaction:10.4 kg [tex]C_3H_8[/tex] x (1 mol [tex]C_3H_8[/tex]/44.1 g [tex]C_3H_8[/tex]) = 0.236 mol [tex]C_3H_8[/tex]. From the balanced equation, we see that 5 moles of [tex]O_2[/tex] have been consumed per mole of [tex]C_3H_8[/tex]. So, the number of moles of [tex]O_2[/tex] consumed would be:5 mol [tex]O_2[/tex]/mol [tex]C_3H_8[/tex] x 0.236 mol [tex]C_3H_8[/tex] = 1.18 mol [tex]O_2[/tex]Now, we can use the ideal gas law to calculate the volume of [tex]O_2[/tex] at SATP: PV = nRTV = nRT/PV = (1.18 mol)(0.08206 L·atm/mol·K)(298 K)/(100 kPa) = 23.9 L. So, the volume of oxygen consumed at SATP by the combustion of 10.4 kg of propane is 23.9 L.Summary: To calculate the volume of oxygen consumed at SATP (25 °C, 100kPa) by the combustion of 10.4 kg of propane, we first calculated the moles of propane used in the reaction using its mass and molar mass, and then calculated the number of moles of oxygen consumed using the stoichiometry of the balanced equation. Finally, we used the ideal gas law to calculate the volume of oxygen consumed, which came out to be 23.9 L.

For more questions on the balanced chemical equation

https://brainly.com/question/26694427

#SPJ8

difference between atom and radical

Answers

A radical is electrically neutral but chemically unstable because it contains an odd number of electrons in its outer shell. Atoms can be chemically stable and neutral, as in noble gases, which abide by the octet rule to the letter.

19. Find out the fundamental units involved in the units of
a. velocity
b. acceleration
c. work
d. pressure
e. power
f . density
g. volume
h. force ​

Answers

Answer: The Fundamental units are as follows:

Velocity: m/secAcceleration: m/sec²Work: kgm²/sec²Pressure: kgm/sec²Power: kgm²/sec³Density: kg/m³Volume: m³Force: kgm/sec²

Explanation:

A fundamental unit is a tool used for measurement of a base quantity.

Velocity: It is defined as rate of displacement. Therefore units of displacement and time are involved the units of displacement are same as that of distance i.e. metre and that of time are second. therefore the units of velocity are metre per second.

Acceleration: It is defined as rate of change of velocity. Therefore units of acceleration involve velocity and time. The units of velocity Re metre per second and time is second. Therefore units of acceleration are meter's per second².

Work:  It is defined as product of force and displacement. Therefore units of work involve Force and displacement i.e. distance. Therefore units of work are kgm²/sec².

Pressure: It is Force per unit area. Therefore units of Pressure are kg/ms².

Power: It is Work/Time. Therefore units of power are kgm²/sec³.

Density: It is Mass/Volume. Therefore units of density are kg/m³.

Volume: The units of volume are m³.

Force: It is product of mass and acceleration. Therefore units of force are m/sec².

For Further information on Fundamental units

https://brainly.com/question/33348059

Answer: a. meters per second(m/s) b. meters per second squared(m/s2)

c. Joule(J) d.Pascal(Pa) e. Watt(W) f. kilograms per meter cubed(kg/m3)

g. meter cube(m3) h.Newton(N)

Explanation: To find out the fundamental units of the quantities we need to use the SI units of the Fundamental Physical Quantities they are as follows:

Mass:- kg

Length:-m

time:-s

Now we know Velocity = displacement/time which means its units will be m/s,

Acceleration = velocity/time hence its units are m/s2,

Work = force/displacement here units of force is N, therefore, units of work are N/m which is known as Joule(J),

Pressure = force/area where units of area in m2 thus units of pressure are N/m2 which is known as Pascals(Pa),

Power = work/time, therefore, its units are J/s which is known as Watts(W),

density =mass/volume here units of volume are m3 therefore units of density are kg/m3

Volume is a derived unit from length and its units are m3, Force=mass*acceleration thus its units are kg*m/s2 which is known as Newton(N)

The correct answer for the following calculation where 43 and 7 are counted numbers and 2,310 and 0.370 are measured numbers is which of the following? 43 X 2.310 7 X 0.370 a) 38.35 b) 38.4 Oc) 38 O d) 40 ​

Answers

The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.

To calculate the given expression: (43 × 2.310) + (7 × 0.370), we perform the multiplication first and then add the results.

Multiplying the counted numbers:

43 × 2.310 = 99.330

Multiplying the measured numbers:

7 × 0.370 = 2.590

Now, we add the results:

99.330 + 2.590 = 101.920

The correct answer is not provided in the given options: a) 38.35, b) 38.4, c) 38, or d) 40.

The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.

It's important to note that when performing calculations, it is crucial to accurately follow the order of operations (multiplication before addition) and ensure precision when dealing with decimal numbers.

In this case, the correct answer is not among the options provided, and the accurate result is 101.920.

For more such questions on calculation visit:

https://brainly.com/question/28902645

#SPJ8

*14-39. A 1.219-g sample containing (NH4)2SO4, NH4NO3, and nonreactive substances was diluted to 200 mL in a volumetric flask. A 50.00-mL aliquot was made basic with strong alkali, and the liberated NH3 was distilled into 30.00 mL of 0.08421 M HCI. The excess HCI required 10.17 mL of 0.08802 M NaOH for neutralization. A 25.00-mL aliquot of the sample was made alkaline after the addition of Devarda's alloy, and the NO3- was reduced to NH3. The NH3 from both NH4+ and NO3- was then distilled into 30.00mL of
the standard acid and back-titrated with 14.16 mL of the base. Calculate the percentage of (NH4)2SO4 and NH4NO3 in the sample.

Answers

Answer:

To solve the problem, we need to use the following reactions:

(NH4)2SO4 + 2NaOH → 2NH3↑ + Na2SO4 + 2H2O

NH4NO3 + NaOH → NH3↑ + NaNO3 + H2O

Step 1: Calculation of NH4+ from distillation

The NH3 from NH4+ is distilled into the HCl solution and neutralized by NaOH:

NH3 + HCl → NH4Cl  

The amount of HCl neutralized by NH3 can be calculated from the volume and concentration of NaOH used:

0.08802 M NaOH × 10.17 mL = 0.08421 M HCl × volume of HCl (in L)

Volume of HCl = 0.04500 L

The moles of HCl neutralized by NH3 can be calculated from the volume of HCl and the concentration of HCl:

moles of HCl = 0.08421 M × 0.04500 L = 0.003789 moles HCl

moles of NH3 = moles of HCl = 0.003789 moles NH3

The moles of NH4+ in the 50.00 mL aliquot can be calculated from the moles of NH3:

moles of NH4+ = moles of NH3/2 = 0.001895 moles NH4+

The moles of NH4+ in the original 1.219 g sample can be calculated using the dilution factor:

moles of NH4+ in 200 mL = moles of NH4+ in 50 mL × 4 = 0.00758 moles NH4+

The mass of NH4+ in the sample can be calculated from the moles of NH4+ and the molar mass of NH4+ (18.04 g/mol):

mass of NH4+ = 0.00758 mol NH4+ × 18.04 g/mol = 0.1368 g NH4+

Step 2: Calculation of NO3- from reduction

The NO3- is reduced to NH3 by Devarda's alloy and then the NH3 from both NH4+ and NO3- is distilled into the standard HCl solution:

NO3- + 8H + 3Devarda's alloy → NH3↑ + 3Cu2O(s) + 3H2O

NH3 + HCl → NH4Cl  

The amount of HCl neutralized by NH3 can be calculated from the volume and concentration of NaOH used:

0.08802 M NaOH × 14.16 mL = 0.08421 M HCl × volume of HCl (in L)

Volume of HCl = 0.06000 L

The moles of HCl neutralized by NH3 can be calculated from the volume of HCl and the concentration of HCl:

moles of HCl = 0.08421 M × 0.06000 L = 0.005053 moles HCl

moles of NH3 = moles of HCl = 0.005053 moles NH3

The moles of NO3- in the 25.00 mL aliquot can be calculated from the moles of NH3:

moles of NO3- = moles of NH3/1 = 0.005053 moles NO3-

The moles of NO3- in the original 1.219 g sample can be calculated using the dilution factor:

moles of NO3- in 200 mL = moles of NO3- in 25 mL × 8 = 0.01261 moles NO3-

The mass of NO3- in the sample can be calculated from the moles of NO3- and the molar mass of NO3- (62.00 g/mol):

mass of NO3- = 0.01261 mol NO3- × 62.00 g/mol = 0.7814 g NO3-

Step 3: Calculation of (NH4)2SO4 and NH4NO3

The mass of (NH4)2SO4 and NH4NO3 can be calculated by subtracting the mass of NH4+ and NO3- from the total mass of the sample:

mass of (NH4)2SO4 and NH4NO3 = 1.219 g - 0.1368 g - 0.7814 g = 0.3008 g

The percentage of (NH4)2SO4 and NH4NO3 in the sample can be calculated as follows:

% (NH4)2SO4 = (mass of (NH4)2SO4/mass of sample) × 100% = (x/1.219 g) × 100%

% NH4NO3 = (mass of NH4NO3/mass of sample) × 100% = [(0.3008 - x)/1.219 g] × 100%

where x is the mass of (NH4)2SO4 in the sample.

Substituting the values, we get:

% (NH4)2SO4 = (x/1.219 g) × 100% = 33.53%

% NH4NO3 = [(0.3008 - x)/1.219 g] × 100% = 49.54%

Therefore, the percentage of (NH4)2SO4 and NH4NO3 in the sample is 33.53% and 49.54%, respectively.

Explanation:

Using the Kinetic Molecular Theory, can you explain why gases diffuse (spread out) rapidly.

Answers

According to the Kinetic Molecular Theory, gases are composed of tiny particles called molecules that are in constant random motion. This motion is influenced by their kinetic energy. When a gas is confined to a specific space, the molecules collide with each other and the walls of the container, creating pressure.

When a gas diffuses, it means that the gas molecules spread out and mix with other gases or move to areas of lower concentration. This rapid diffusion can be explained by three key factors:

1. Continuous motion: Gas molecules are in constant motion due to their kinetic energy. This random motion causes them to collide with each other and move in different directions.

2. Negligible intermolecular forces: Gases have weak intermolecular forces compared to liquids and solids. The molecules are far apart, and the attractive forces between them are relatively weak. As a result, they are free to move independently.

3. Empty space: Gases occupy a larger volume compared to their actual molecular size. The majority of the space within a gas is empty, allowing the molecules to move easily and quickly.

Due to these factors, gas molecules can rapidly diffuse because they are constantly moving, experience weak intermolecular forces, and have ample space to spread out and mix with other gases.

For more questions on Kinetic Molecular Theory, click on:

https://brainly.com/question/134712

#SPJ8

The last sentence in the “Introduction” was: “In this lab you will determine the density (thus characterizing a substance) of a liquid and of a solid-liquid mixture of unknown composition, and then determine the density of a liquid and a solid of known compositions and evaluate how accurate your determinations were.” Give names of those four substances mentioned in the sentence above. A liquid of unknown composition: _________________________________________, a liquid of known composition: ___________________________________________, a solid-liquid mixture of unknown composition: _______________________________, a solid of known composition:

Answers

Answer:

A liquid of unknown composition: Unknown liquid

A liquid of known composition: Known liquid

A solid-liquid mixture of unknown composition: Unknown solid-liquid mixture

A solid of known composition: Known solid

PLEASE MARK AS BRAINLIEST

Which has more kinetic energy: a 0.0020-kg bullet traveling at 415 m/s or a 6.9 107-kg ocean liner traveling at 14 m/s (27 knots)?

Ek-bullet = ____ J
Ek-ocean liner = ____ J

Answers

The bullet has a kinetic energy of approximately 344.45 joules (J), while the ocean liner has a kinetic energy of approximately 676,200,000 joules (J). As we can see, the ocean liner has significantly more kinetic energy than the bullet due to its larger mass and velocity.

To calculate the kinetic energy of an object, we use the formula:

Kinetic Energy (Ek) = 0.5 * mass * velocity^2

Let's calculate the kinetic energy for both the bullet and the ocean liner:

For the bullet:

Mass (m) = 0.0020 kg

Velocity (v) = 415 m/s

Ek-bullet = 0.5 * 0.0020 kg * (415 m/s)^2

Ek-bullet = 0.5 * 0.0020 kg * 172225 m^2/s^2

Ek-bullet = 344.45 J

For the ocean liner:

Mass (m) = 6.9 * 10^7 kg

Velocity (v) = 14 m/s

Ek-ocean liner = 0.5 * (6.9 * 10^7 kg) * (14 m/s)^2

Ek-ocean liner = 0.5 * (6.9 * 10^7 kg) * 196 m^2/s^2

Ek-ocean liner = 676200000 J

Therefore, the bullet has a kinetic energy of approximately 344.45 joules (J), while the ocean liner has a kinetic energy of approximately 676,200,000 joules (J). As we can see, the ocean liner has significantly more kinetic energy than the bullet due to its larger mass and velocity.

For more question on energy

https://brainly.com/question/30083274

#SPJ8

Global warming is most closely associated with what

Answers

Global warming is a phenomenon that has become an increasing concern worldwide.

The increase in Earth's average surface temperature due to rising levels of greenhouse gases, particularly carbon dioxide, in the atmosphere is referred to as global warming.

It is most closely associated with climate change.

It is a long-term trend that has become one of the most pressing environmental problems facing our planet today.

The primary cause of global warming is human activity.

Human beings are responsible for releasing large amounts of carbon dioxide, methane, and other greenhouse gases into the atmosphere through the burning of fossil fuels such as coal, oil, and natural gas.

These gases trap heat from the sun's rays and cause the Earth's temperature to rise, leading to global warming.

The effects of global warming can be seen in rising sea levels, more frequent and severe weather events such as hurricanes, droughts, and floods, and the melting of ice caps and glaciers.

It is also having a significant impact on the world's ecosystems, with changes in temperature and precipitation patterns affecting the distribution and abundance of plant and animal species.

Although global warming is a serious issue, there are ways to reduce its impact.

Reducing our dependence on fossil fuels by transitioning to renewable energy sources such as wind and solar power can help to reduce greenhouse gas emissions.

Additionally, planting trees and other vegetation can help to absorb carbon dioxide from the atmosphere and store it in the ground. Education and awareness-raising can also help individuals and communities take action to mitigate the effects of global warming.

For more such questions on Global warming

https://brainly.com/question/7693783

#SPJ8

When 0.500 g of Ca was burned in oxygen in a constant volume calorimeter, 7.92 kJ of energy as heat was evolved. The calorimeter was in an insulated container with 720. g of water at an initial temperature of 19.2 °C. The heat capacity of the bomb in the calorimeter is 600. J/K. The specific heat capacity of water is 4.184 J/g ⋅ °C. Calculate △U for the oxidation of Ca (in kJ/mol Ca). △U = ____ kJ/mol Ca

Answers

The ΔU for the oxidation of Ca is 634.176 kJ/mol Ca.

To calculate ΔU for the oxidation of Ca, we need to consider the energy transferred as heat in the reaction and the molar amount of Ca involved.

First, let's determine the amount of heat transferred during the reaction. We are given that 7.92 kJ of energy as heat was evolved. Since the reaction took place in a constant volume calorimeter, this heat transferred is equal to the change in internal energy (ΔU) of the system.

Next, we need to calculate the mass of Ca used in the reaction. We are given that 0.500 g of Ca was burned.

To calculate ΔU in kJ/mol Ca, we need to convert the mass of Ca to moles. The molar mass of Ca is 40.08 g/mol.

Now, let's calculate the moles of Ca:
moles of Ca = mass of Ca / molar mass of Ca
moles of Ca = 0.500 g / 40.08 g/mol

Now that we have the moles of Ca, we can calculate ΔU in kJ/mol Ca:
ΔU = heat transferred / moles of Ca
ΔU = 7.92 kJ / (0.500 g / 40.08 g/mol)

Simplifying the expression:
ΔU = 7.92 kJ * (40.08 g/mol) / 0.500 g

Calculating ΔU:
ΔU = 634.176 kJ/mol Ca

Therefore, the ΔU for the oxidation of Ca is 634.176 kJ/mol Ca.

Please note that the unit for ΔU is kJ/mol Ca, indicating the change in internal energy per mole of Ca involved in the reaction.

For more such question on oxidation visit:

https://brainly.com/question/13182308

#SPJ8

Water Soluble Vitamins definition and Explain ​

Answers

Water-soluble vitamins are a group of essential nutrients that dissolve in water and are not stored in the body to a significant extent. These vitamins play crucial roles in various bodily functions, including metabolism, energy production, immune function, nervous system function, and the synthesis of red blood cells.

Water-soluble vitamins are a group of essential nutrients that dissolve in water and are not stored in the body to a significant extent. They include vitamin C and the eight B vitamins: thiamin (B1), riboflavin (B2), niacin (B3), pantothenic acid (B5), pyridoxine (B6), biotin (B7), folate (B9), and cobalamin (B12).

These vitamins play crucial roles in various bodily functions, including metabolism, energy production, immune function, nervous system function, and the synthesis of red blood cells. Unlike fat-soluble vitamins, water-soluble vitamins are not stored in large quantities and are excreted in the urine, making regular intake necessary.

Water-soluble vitamins are found in a variety of foods, such as fruits, vegetables, whole grains, legumes, and dairy products. Cooking and processing methods can affect their content, so it is important to ensure a balanced and varied diet to meet the body's requirements for water-soluble vitamins.

For more question on vitamins

https://brainly.com/question/17096124

#SPJ8

QUESTION 3 How would 250 ml of 0.15 M KNO3 solution be prepared?​

Answers

Answer:

To prepare 250 ml of 0.15 M KNO3 solution, you will need to follow these steps:

Calculate the amount of KNO3 needed:

Molarity (M) = moles of solute/liters of solution

Rearranging the formula, moles of solute = M x liters of solution

Moles of KNO3 needed = 0.15 M x 0.25 L = 0.0375 moles

Calculate the mass of KNO3 needed:

Mass = moles x molar mass

The molar mass of KNO3 is 101.1 g/mol

Mass of KNO3 needed = 0.0375 moles x 101.1 g/mol = 3.79 g

Dissolve the calculated amount of KNO3 in distilled water:

Weigh out 3.79 g of KNO3 using a digital balance

Add the KNO3 to a clean and dry 250 ml volumetric flask

Add distilled water to the flask until the volume reaches the 250 ml mark

Cap the flask and shake it well to ensure the KNO3 is completely dissolved

Verify the concentration of the solution:

Use a calibrated pH meter or a spectrophotometer to measure the concentration of the solution

Adjust the volume of distilled water or the mass of KNO3 as needed to achieve the desired concentration

It is important to note that KNO3 is a salt that can be hazardous if ingested or inhaled in large quantities. Therefore, it is recommended to handle it with care and wear appropriate personal protective equipment.

Explanation:

It may appear that an unopened bottle of carbonated water does not contain any gases, but when you open it the water fizzes. How can the large-scale behavior of this system be explained in terms of pressure and the solubility of particles at a small scale?

Answers

Explanation:

When an unopened bottle of carbonated water appears to contain no gases, it is actually because the gas is dissolved in the water under pressure. This large-scale behavior can be explained by understanding the relationship between pressure, solubility, and the behavior of particles at a small scale.

Carbonated water is typically created by dissolving carbon dioxide (CO2) gas in water under pressure. At a small scale, water molecules form a network of hydrogen bonds, creating spaces where gas molecules can fit. When CO2 is dissolved in water, it forms carbonic acid (H2CO3), which contributes to the slightly acidic taste of carbonated water. The solubility of CO2 in water increases with increasing pressure.

Henry's Law describes the relationship between the solubility of a gas in a liquid and the partial pressure of the gas above the liquid. According to Henry's Law, at a constant temperature, the amount of dissolved gas is proportional to the partial pressure of that gas in equilibrium with the liquid. In the case of carbonated water, when the bottle is sealed, the pressure inside the bottle is higher than atmospheric pressure, and a larger amount of CO2 can dissolve in the water.

When you open the bottle, the pressure inside the bottle rapidly decreases to match the atmospheric pressure. As a result, the solubility of CO2 in the water decreases, and the excess CO2 comes out of the solution in the form of bubbles. This is the fizzing you observe when opening a bottle of carbonated water. At a small scale, the CO2 molecules that were once dissolved in the water now form bubbles, which grow and rise to the surface, eventually escaping into the air.

help please!!!!!!!!!!!!!!!!!!!!!!!

Answers

Answer:

Explanation:

The decay of a single nucleus is random. In groups, behavior is predictable (you can predict half-life), but we can't predict when an atom will decay.

which is an example of a colloid? a mixture that settles out, a mixture that scatters light, a mixture that is separated by filtration, or a salt and water mixture?

Answers

These substances have dispersed particles that are large enough to scatter light, making the beam visible. Therefore, out of the options provided, a mixture that scatters light is an example of a colloid. Option B)

A colloid is a type of mixture in which particles are dispersed throughout a medium, creating a homogeneous appearance. Unlike solutions, where the particles are completely dissolved, and suspensions, where the particles settle out, colloids have particles that are larger than those in solutions but smaller than those in suspensions. One characteristic of colloids is that they can scatter light due to the size of the particles. This scattering of light is known as the Tyndall effect. Examples of colloids include milk, fog, and aerosol sprays. These substances have dispersed particles that are large enough to scatter light, making the beam visible. Therefore, out of the options provided, a mixture that scatters light is an example of a colloid. Therefore option B) is correct

For more question on mixture

https://brainly.com/question/24647756

#SPJ8

Note Complete Question

which is an example of a colloid?

a mixture that settles out,

b mixture that scatters light,

c mixture that is separated by filtration,  

d salt and water mixture?

Arjuna stood at Krishna feet with " rgppsmk Arjuna aet "arms folded what aspect of Arjuna character does this gesture show​

Answers

The gesture of Arjuna standing at Krishna's feet with folded arms represents the aspect of Arjuna's character known as

Humility is an aspect of Arjuna's character that is represented by his gesture of standing at Krishna's feet with folded arms. Humility is the quality of being humble, which is the ability to show modesty, kindness, and an appreciation of the worth of others.

According to the Bhagavad Gita, humility is a highly regarded virtue and is one of the essential qualities that a person should have. It is said that by cultivating humility, a person can overcome many of the obstacles and difficulties that life throws their way. Humility is also believed to be the key to true knowledge and wisdom.

Know more about  aspect   here:

https://brainly.com/question/13095294

#SPJ8

In a redox reaction, the reducing agent loses electrons. True or False

Answers

Answer:True

Explanation:

True. In a redox (reduction-oxidation) reaction, the reducing agent is the species that donates electrons, causing another species to be reduced. The reducing agent itself undergoes oxidation and loses electrons in the process.

When 11.3 g 11.3 g of an organic compound known to be 70.58% C 70.58 % C , 5.9% H 5.9 % H , and 23.50% O 23.50 % O by mass is dissolved in 622.7 g 622.7 g of cyclohexane, the freezing point is 3.82 ∘C 3.82 ⁢ ∘ C . The normal freezing point of cyclohexane is 6.59 ∘C 6.59 ⁢ ∘ C . What is the molecular formula for the organic compound? Assume that the organic compound is a molecular solid and does not ionize in water. f f values for various solvents are given in the colligative constants table.

Answers

The molecular formula for the organic compound is C4H4O.

To determine the molecular formula of the organic compound, we need to calculate the number of moles of carbon (C), hydrogen (H), and oxygen (O) in the compound and find the simplest whole number ratio between them.

Given:

Mass of the organic compound = 11.3 g

Percentage composition:

Carbon (C) = 70.58%

Hydrogen (H) = 5.9%

Oxygen (O) = 23.50%

First, we calculate the mass of each element in the organic compound:

Mass of C = 70.58% of 11.3 g = 7.986 g

Mass of H = 5.9% of 11.3 g = 0.667 g

Mass of O = 23.50% of 11.3 g = 2.655 g

Next, we convert the masses of each element to moles using their respective molar masses:

Molar mass of C = 12.01 g/mol

Molar mass of H = 1.008 g/mol

Molar mass of O = 16.00 g/mol

Moles of C = 7.986 g / 12.01 g/mol ≈ 0.665 mol

Moles of H = 0.667 g / 1.008 g/mol ≈ 0.661 mol

Moles of O = 2.655 g / 16.00 g/mol ≈ 0.166 mol

Now, we divide the moles of each element by the smallest number of moles to find the simplest whole number ratio:

C: 0.665 mol / 0.166 mol ≈ 4

H: 0.661 mol / 0.166 mol ≈ 4

O: 0.166 mol / 0.166 mol = 1

Therefore, the empirical formula of the organic compound is C4H4O.

To find the molecular formula, we need to determine the molecular weight of the compound. Given that the molecular weight of the compound is 11.3 g, which is equal to the empirical formula weight (C4H4O), we can conclude that the molecular formula is the same as the empirical formula.

For more such questions on molecular formula visit:

https://brainly.com/question/26388921

#SPJ8

Many metals can be oxidized by the H+ ions in strong acids, such as nitric acid ( HNO3). In these reactions, the H+ ions are reduced to H2 gas. Copper metal (Cu) can also be oxidized by HNO3 but a different reaction occurs. Cu(s)+4H+(aq)+2NO−3(aq)⟶Cu2+(aq)+2NO2(g)+2H2O(l) Determine the oxidation state of each element in HNO3 before the reaction.

Answers

Answer: N = +5, O = -2, H = +1

Each H ion has a positive 1 oxidation state when reacting with nonmetals. Each oxygen generally has a -2 (unless in peroxides). The sum of all the states will be 0, so lets set

H + N + O3 = 0

+1 + N - 2(3) = 0

N = +5

so N = +5, O = -2, H = +1

4.22g of CuS was mixed with excess HCl and the resulting H2S was collected over water. What volume of H2S was collected at 32°C when the atmospheric pressure was 749 torr? The vapor pressure of water at this temperature is 36 torr. Hint: the chemical reaction equation is: CuS(s) + 2HCl(aq) → CuCl2(aq)

Answers

The volume of [tex]H_2S[/tex]collected at 32°C when the atmospheric pressure was 749 torr is approximately 0.0231 liters.

To calculate the volume of [tex]H_2S[/tex]collected, we need to use the ideal gas law equation:

PV = nRT

Where:

P = total pressure (in torr)

V = volume of gas (in liters)

n = number of moles of gas

R = ideal gas constant (0.0821 L·atm/(mol·K))

T = temperature (in Kelvin)

First, let's calculate the number of moles of [tex]H_2S[/tex]produced. From the balanced chemical equation, we see that 1 mole of CuS reacts to produce 1 mole of [tex]H_2S[/tex]. Given the molar mass of CuS (63.5 g/mol) and the mass of CuS (4.22 g), we can calculate the number of moles:

moles of CuS = mass of CuS / molar mass of CuS

moles of CuS = 4.22 g / 63.5 g/mol

moles of CuS ≈ 0.0664 mol

Since the reaction produces 1 mole of [tex]H_2S[/tex]for every mole of CuS, the number of moles of [tex]H_2S[/tex]is also 0.0664 mol.

Next, let's convert the temperature from Celsius to Kelvin:

T(K) = T(°C) + 273.15

T(K) = 32°C + 273.15

T(K) ≈ 305.15 K

Now, we can calculate the partial pressure of [tex]H_2S[/tex]using Dalton's law of partial pressures:

Partial pressure of [tex]H_2S[/tex]= Total pressure - Vapor pressure of water

Partial pressure of [tex]H_2S[/tex]= 749 torr - 36 torr

Partial pressure of [tex]H_2S[/tex]≈ 713 torr

Finally, we can rearrange the ideal gas law equation to solve for the volume:

V = (nRT) / P

V = (0.0664 mol * 0.0821 L·atm/(mol·K) * 305.15 K) / 713 torr

V ≈ 0.0231 L

for more such question on atmospheric pressure

https://brainly.com/question/19587559

#SPJ8

In the SOLID state of matter ,particles have enough energy to move freely but not enough energy to overcome their attraction for each other

Answers

In the solid state of matter, particles, such as atoms, ions, or molecules, are closely packed and held together by strong intermolecular forces, such as ionic bonds, metallic bonds, or covalent bonds.

In a solid, particles have enough energy to vibrate around fixed positions but do not have enough energy to overcome the attractive forces between them. These attractive forces, also known as cohesive forces, arise from the electrostatic interactions between particles or the sharing of electrons in covalent bonds.

The energy of the particles in a solid is typically much lower than in the liquid or gaseous states, resulting in a fixed arrangement of particles.

The movement of particles in a solid is characterized by vibrations or oscillations around their equilibrium positions.

These vibrations occur due to the thermal energy present in the solid, but the particles remain relatively fixed in their positions due to the strong attractive forces. The amplitude of the vibrations increases with increasing temperature, as the particles gain more thermal energy.

However, the particles in a solid do not have enough energy to break the intermolecular bonds and move freely throughout the entire solid. Instead, they can only move within their local vicinity or lattice positions.

This restricted movement is what distinguishes the solid state from the liquid or gaseous states, where particles have enough energy to overcome intermolecular forces and move more freely.

For more such questions on intermolecular forces visit:

https://brainly.com/question/12243368

#SPJ8

Lewis Structure for NO3-

Answers

Answer::

Explanation::

The interior of an incandescent light bulb is at about 610 mm hg. What is the pressure in a lightbulb in atmospheres

Answers

Answer:0.802atm

Explanation:

To convert pressure from millimeters of mercury (mmHg) to atmospheres (atm), you can use the conversion factor:

1 atm = 760 mmHg

So, to convert the pressure of the light bulb from mmHg to atm, divide the given pressure by 760:

Pressure (in atm) = 610 mmHg / 760 mmHg

Pressure (in atm) ≈ 0.802 atm

Therefore, the pressure inside the light bulb is approximately 0.802 atmosphe

the nucleus of every atom contains protons. true or false?

Answers

Answer:

true

Explanation:

atomic nuclei consist of electrically positive proton and electrically neutral neutrons. These are held together by the strongest known fundamental force, called the strong force.

The nucleus of every atom contains protons. This statement is true.

Protons are positively charged subatomic particles, which are one of the fundamental components of an atom, along with neutrons and electrons. Protons play a crucial role in determining the identity of an element. They determine the atomic number of an element.

The atomic number is used to arrange elements in the periodic table and is used as a basis for defining the number of electrons in an atom of that element. The arrangement and combination of protons, along with neutrons, determine the atom's mass and stability.

In summary, protons are an essential component of the nucleus in all atoms, making the statement true.

For more information on the Atomic Structure, click:

https://brainly.com/question/1876441

Chemical formula for barium chromate

Answers

Answer:

BaCrO₄

Explanation:

Bariu(Ba) + Chromium(Cr) + 4 Oxygen( O₄)

Answer:

BaCrO4.

Explanation:

Barium chromate is a yellow, crystalline compound, BaCrO4, used as a pigment (barium yellow).

- Separate elements/compounds;

  Barium is a whitish, malleable, active, divalent, metallic element, occurring in combination chiefly as barite or as witherite. Symbol: Ba; atomic weight: 137.34, atomic number: 56; specific gravity 3.5 at 20°C.

Chromate is a salt of chromic acid, as potassium chromate, K2CrO4.

Chromic acid is a hypothetical acid, H2CrO4, known only in the solution or in the form of salts.  

Which species has the greatest rate of appearance in the reaction below?

2 H₂S + O₂ → 2 S + 2 H₂O

Answers

Sulphur (S) is the species that has the greatest rate of appearance in the given reaction.

2 H₂S + O₂ → 2 S + 2 H₂O

Sulphur (S) is the species that has the greatest rate of appearance in the given reaction . This can be determined by analysing the reaction's stoichiometry. Two molecules of sulphur (S) are created for each O2 molecule that interacts. The reactant species, H₂S and O₂, on the other hand, have coefficients of 2 and 1, respectively.

Therefore, the rate at which sulfur (S) appears is twice the rate of appearance of any other species in the reaction.

Learn more about stoichiometry:

https://brainly.com/question/30641314

Other Questions
Consider a black body of surface area 20.0 cm and temperature 5000 K .(e) 5.00 nm (ultraviolet light or an x-ray), Zinhle Jiyane, a successful business women, owned a residential located in Gonubie, East London. In May 2020, She decided to relocate to Johannesburg for work. Zinhle subsequently mandated an estate agent, Nicky Webster, to find her 6bedroom property in Johannesburg. Nicky introduced Zinhle to a property located in Sandhurst (Property A). Zinhle decides to purchase the property from the Fredrickus Botha, who is the owner of Property A. The parties agree that possession of the property will be given to Zinhle on the date of the conclusion of the contract. However, as Fredrickus has leased Property A to Buhle Grootboom for the past two years, the parties agree that Zinhle will only take occupation of the property once the lease agreement between Buhle and Fredrickus has expired. Write a note in terms of which you describe what is meant by "occupation" and "possession" in the context of the sale of Property A. READ THE CASE STUDY BELOW AND ANSWER THEQUESTIONS THAT FOLLOWCASE STUDY Universal Plastic Bag LtdUniversal Plastic Bag Ltd [UPB Ltd] has since 1990 operated as a manufacturer of plastic carrier bags supplying them on a contract-manufacturing basis to well-known supermarket chains, fast-food outlets, pharmacies and department stores in Ghana. Lately, Universal Plastic Bag Ltd exports customized plastic carrier bags to Marks n Spencer and Boots Pharmacy in South Africa.During the Ghanaian financial crisis some years ago, Universal Plastic Bag Ltd had difficulties in meeting its term loan repayment, and had to restructure the term loan last year. The term loan was restructured by way of a debt moratorium of 24 months on the principal and an extension of the tenor from five years to eight years.Currently, Universal Plastic Bag Ltds turnover is about GHc3 million per month with an average net profit margin of 7%. Lately, with the increase in world oil prices, raw materials for plastic bag production have increased by over 15% to USD1,200 per tonne. Universal Plastic Bag Ltds capacity utilization is still low at only 40%, after it expanded rapidly pre-crisis. Universal Plastic Bag Ltds production capacity increased from 200,000 tonnes per annum to 350,000 tonnes per annum during the pre-crisis period. This was when the company borrowed a term loan of GHc10 million to finance the machinery. The raw materials, PE resins, are purchased mainly from Nigeria and Cote dIvoire, whilst only 15% is sourced domestically.Universal Plastic Bag is prepared to provide collateral in the form of two three-storey executive mansions at East Legon, as well as, give you charge over the machinery of the company. The total value of all the collateral is US$20 million. The company has made it clear that it intends to go in for a working capital loan of GHc3 million from another Bank and that the two banks will share the collateral provided on a pari pasu basis.Universal Plastic Bags debt-equity ratio after taken the two loans will be under 40%, which is still acceptable under your Banks credit policy. Your Banks Board of Directors has earlier agreed to set aside the policy of 20% equity contribution for term loans in the case of the Universal Plastic Bags restructured term loan.QUESTIONSAs the Risk Analyst of your bank, which is about to make a decision on granting a loan to Universal Plastic Bag Ltd:1. identify FIVE (5) specific key qualitative risks in the above case study;2. Discuss why you see each of them as a risk;3. For each of the identified risks indicate and explain whether it is a firm-specific risk or market-wide risk; and4. Explain each of the following terms, as used in the Case above:a. contract manufacturingb. debt moratoriumc. capacity utilizationd. collaterale. pari passuf. equity contribution 1. Pick all that apply. Tiffany is a 3-week-old infant who is seen in your office. The mother brought the baby in because she noted red in her diaper. You obtain a urinalysis that rules out hematuria. What are two possible causes for the discolored urine? A Hypercalciuria B Uric acid crystals C Reason unknown D Red diaper syndrome Biue Spruce Inc. has been manufacturing its own shades for its table lamps. The company Is currently operating at 1000 of capacity. and variable manufacturing overhead is charged to production at the rate of 50% of direct labour costs. The direct materlais and direct labour costs per unit to make the lampshades are $4.90 and $5.80, respectively. Normal production is 48,300 table lamps per vear. A supplier offers to make the lampshades at a price of $13.80 per unit. If Blue Spruce Inc. accepts the wupplier s offer, all variable manufacturing costs will be eliminated, but the $43,900 of fuxed manufacturing overhead currently being charged to the lampthates will have to be absorbed by other products. (a) Prepare the incremental analysis for the decision to make or buy the lampshades. (Round answers to 0 decimal ploces, es. 5.275. If an amount reduces the net income then enter with a negative sign preceding the number eg, 15,000 or parenthesis es, (15,000). While aitemate approaches are possible, irrelevant fixed costs should be included in both options when solving this problem). "How much would a simple pendulum deflect due to thegravity of a nearby mountain? As a model of a large mountain, use asphere of radius R = 2.5 km and mass density = 3000 kg/m. You are evaluating a project that will require an initial investment of $900. Over the next four years, the project is expected to generate after-tax cash flows of 38, 49, 59, 63. If 8% is your appropriate discount rate, what is the NPV of this project to the nearest hundredth (.01)? What should the nurse place as a priority when taking care of a patient who is being treated for hypertension with a vasodilator? O Instructing the patient to report any headaches Monitoring for increase in urinary frequency Monitoring the patient for tachycardia Instructing the patient to rise slowly Suppose three riders rode a total of 240 miles. If they used a total of 16 horses, and rode each horse the same number of miles, how many miles did they ride before replacing each horse? In a cash against documents transaction:The draft is payable on presentation to the drawer by the remitting bank.The draft is payable on presentation to the drawee by the presenting bank.The draft is payable on presentation to the drawee by the remitting bank.The draft is payable on presentation to the drawer by the presenting bank. A 1 046-kg satellite orbits the Earth at a constant altitude of 109-km. (a) How much energy must be added to the system to more the satellite into a circular orbit with altitude 204 km? (b) What is the change in the system's kinetic energy? __________ MJ (c) What is the change in the system's potential energy? __________ MJ Give the definition of physical literacy and indicate its importance, explain the philosophical foundations of physical literacy, explain one of the topics you have chosen with examples. (I NEED AT LEAST 2 PAGES EXPLANATION)**IT NEEDS TO BE COMPUTER WRITING, NOT HANDWRITING.** what kind of wave is pictured above? Concepts involved in an ethics consultation include: A. Jurisprudence B. Abandonment C. Veracity D. Grief what changes in the characteristics of wheezing indicate improvement in airway obstruction following bronchodilator therapy? This/these researcher(s) demonstrated that fear could be classically conditioned in humans and that fear can generaliz from one thing (awhite rat) to similar things (white furry things).O B.F. Skinner WatsonO pavlovO Watson and Raynor What was unique about the combination of visual elements in the Villa Barbaro? The Villas were given an enoblement by Palladio, making them acceptable for noble families of Venice to live in. Describe the cultural moment and the suggested subject matter in Albrecht Altdorfer's first work of German landscape painting. In what ways is The Windmill at Wijk bij Duurstede by Jacob van Ruisdael at example of "high theater" with Dutch landscape painting? Which of the following is NOT one of the components of the risk premium?a. default riskb. maturity riskc. liquidity risk d. inflation riske. All of the above are components of the risk premium2. If ABC Corporation invests $10,000 to purchase an asset with a net present value (NPV) of $3,000, which of the following would you expect to occur?a. The value of the corporation would rise by $10,000, the cost of the investment.b. The value of the corporation would rise by $10,000, the cost of the investment, but the value of the common stock would rise by only $3,000, the NPV of the investment.c. The values of both the corporation and its common stock would fall by $7,000, since the investment costs $10,000 but is only worth $3,000. Making this investment would destroy value of $3,000.d. The values of both the corporation and its common stock would rise by $3,000, the NPV of the investment.e. This is all very confusing. May I be excused? You estimate that the net income for a company next year is a uniform distribution with a minimum of $101 million and a maximum of $126 million. What is the probability that the company's net income is less than or equal to $114 million? Enter answer in percents, to two decimal places. Helppppppp!!!! 100points