What did J. J. Thomson's cathode ray experiment show about atoms?

Answer:

(a) [tex]M=0.257M[/tex]

(b) [tex]M=0.0510M[/tex]

(c) [tex]M =0.500M[/tex]

(d) [tex]M= 0.391M[/tex]

Explanation:

Hello,

In this case, since the molarity or molar concentration of a solution is computed by dividing the moles of solute by the volume of solution in liters, we proceed as follows:

(a) The molar mass of sodium chloride is 58.45 g/mol and the volume in liters is 0.100 L, therefore, the molarity is:

[tex]M=\frac{1.50gNaCl}{0.100L} *\frac{1molNaCl}{58.45gNaCl} =0.257M[/tex]

(b) The molar of potassium dichromate is 294.2 g/mol and the volume in liters is 0.100 L, therefore, the molarity is:

[tex]M=\frac{1.50gK_2Cr_2O_7}{0.100L} *\frac{1molK_2Cr_2O_7}{294.2gK_2Cr_2O_7} =0.0510M[/tex]

(c) The molar of calcium chloride is 111 g/mol and the volume in liters is 0.125 L, therefore, the molarity is:

[tex]M=\frac{5.55gCaCl_2}{0.100L} *\frac{1molCaCl_2}{111gCaCl_2} =0.500M[/tex]

(d) The molar of sodium sulfate is 142 g/mol and the volume in liters is 0.125 L, therefore, the molarity is:

[tex]M=\frac{5.55gNa_2SO_4}{0.100L} *\frac{1molNa_2SO_4}{142gNa_2SO_4} = 0.391M[/tex]

Best regards.

Answer:

No precipitate is formed.

Explanation:

Hello,

In this case, given the dissociation reaction of magnesium fluoride:

[tex]MgF_2(s)\rightleftharpoons Mg^{2+}+2F^-[/tex]

And the undergoing chemical reaction:

[tex]MgCl_2+2NaF\rightarrow MgF_2+2NaCl[/tex]

We need to compute the yielded moles of magnesium fluoride, but first we need to identify the limiting reactant for which we compute the available moles of magnesium chloride:

[tex]n_{MgCl_2}=0.3L*1.1x10^{-3}mol/L=3.3x10^{-4}molMgCl_2[/tex]

Next, the moles of magnesium chloride consumed by the sodium fluoride:

[tex]n_{MgCl_2}^{consumed}=0.5L*1.2x10^{-3}molNaF/L*\frac{1molCaCl_2}{2molNaF} =3x10^{-4}molMgCl_2[/tex]

Thus, less moles are consumed by the NaF, for which the moles of formed magnesium fluoride are:

[tex]n_{MgF_2}=3x10^{-4}molMgCl_2*\frac{1molMgF_2}{1molMgCl_2}=3x10^{-4}molMgF_2[/tex]

Next, since the magnesium fluoride to magnesium and fluoride ions is in a 1:1 and 1:2 molar ratio, the concentrations of such ions are:

[tex][Mg^{2+}]=\frac{3x10^{-4}molMg^{+2}}{(0.3+0.5)L} =3.75x10^{-4}M[/tex]

[tex][F^-]=\frac{2*3x10^{-4}molMg^{+2}}{(0.3+0.5)L} =7.5x10^{-4}M[/tex]

Thereby, the reaction quotient is:

[tex]Q=(3.75x10^{-4})(7.5x10^{-4})^2=2.11x10^{-10}[/tex]

In such a way, since Q<Ksp we say that the ions tend to be formed, so no precipitate is formed.

Regards.

Answer:

influencing consumer tastes

increasing product awareness

promoting company branding

Explanation:

Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:

Hence, the correct options are:

Answer:

1,3,4

Explanation:

I took the test

Answer:

That means that if you are calculating entropy change, you must multiply the enthalpy change value by 1000. So if, say, you have an enthalpy change of -92.2 kJ mol-1, the value you must put into the equation is -92200 J mol-1

The entropy change in the surroundings associated with this reaction occurring at 25 degree C is calculated as ΔS = -ΔH/T J/K.

Entropy is a quantity which gives idea about the randomness or arrangement of atoms or molecules present in any sample.

Entropy change will be calculated as:
ΔS = -ΔH/T, where

ΔH = chnage in enthalpy (J/mole)

T = temperature (K)

So to calculate the entropy change first we have to know about the value of enthalpy in joules and then divide it by the temperature.

Hence the unit of entropy is joule per kelvin.

To know more about entropy, visit the below link:
https://brainly.com/question/6364271

Answer:

rate = [NO]²[H₂]

Explanation:

2NO + H2 ⟶N2 + H2O2 (slow)

H2O2 + H2 ⟶2H2O (fast)

From the question, we are given two equations.

In chemical kinetics; that is the study of rate reactions and changes in concentration. The rate law is obtained from the slowest reaction.

This means that our focus would be on the slow reaction. Generally the rate law is obtained from the concentrations of reactants in a reaction.

This means our rate law is;

rate = [NO]²[H₂]

Answer:

Spacecraft’s acceleration (a) = 0.10 N / 500 kg

Explanation:

Given:

Mass of Spacecraft (M) = 500 Kg

Force generate by engine (F) = 0.10 N

Find:

Spacecraft’s acceleration (a)

Computation:

F = Ma

0.10 = 500 (a)

a = 0.10 / 500

Spacecraft’s acceleration (a) = 0.10 N / 500 kg

The expression which can be used to find the spacecraft’s acceleration if its engine created a net force of 0.10 N is  0.10 N/500Kg.

We know that force is the product of the mass a body and its acceleration. The result of motion is the action of an unbalanced force. We have the following information;

Mass of the spacecraft = 500 kg

Force on the engine =  0.10 N

From Newton's law;

F = ma

F = force

m = mass

a = acceleration

a = F/m

acceleration = 0.10 N/500Kg

Learn more: https://brainly.com/question/8592296

Answer:

105/22*(1.251-0.620)

105/22*0.631

4.772*0.631

3.011132

Hope it helps

Answer:

3.0

Explanation:

First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).

The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.

Answer:

C10H22

Explanation:

Graphite is known as an allotrope of carbon. Its characteristics include being black and slippery and as used as lubricants.

Gold (Au) is an element on the periodic table with atomic number 79 and a mass number 197 which exists as a metal due to its hydrogen bonds.

C10H22 which is also known as decane belongs to the Alkane family.The General forces of attraction between the alkane family are weak but in the case of decade there is Van der waal force which makes Decane C10H22 a Molecular Solid.

Answer:

C : t-BuOMe

Explanation:

The tert -butanol is a tertiary alcohol and when chloride ion attacks the carbocation, it forms t-BuCl.

The reaction of tert-butyl chloride or t-BuCl ((CH3)3C−Cl) with methanol and MeOH (CH3−OH) gives the product tert-Butyl methyl ether or t-BuOMe (CH3)3C−OCH3:

                   (CH3)3C−Cl + CH3−OH => (CH3)3C−OCH3 + HCl

Hence, the correct asnwer is C : t-BuOMe

The question is missing. Here is the complete question.

Which balanced redox reaction is ocurring in the voltaic cell represented by the notation of [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex]?

(a) [tex]Al_{(s)}+Pb^{2+}_{(aq)} ->Al^{3+}_{(aq)}+Pb_{(s)}[/tex]

(b) [tex]2Al^{3+}_{(aq)}+3Pb_{(s)} -> 2Al_{(s)}+3Pb^{2+}_{(aq)}[/tex]

(c)[tex]Al^{3+}_{(aq)}+Pb_{(s)} ->Al_{(s)}+Pb^{2+}_{(aq)}[/tex]

(d) [tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Answer: (d) [tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Explanation: Redox Reaction is an oxidation-reduction reaction that happens in the reagents. In this type of reaction, reagent changes its oxidation state: when it loses an electron, oxidation state increases, so it is oxidized; when receives an electron, oxidation state decreases, then it is reduced.

Redox reactions can be represented in shorthand form called cell notation, formed by: left side of the salt bridge (||), which is always the anode, i.e., its half-equation is as an oxidation and right side, which is always the cathode, i.e., its half-equation is always a reduction.

For the cell notation: [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex]

Aluminum's half-equation is oxidation:

[tex]Al_{(s)} -> Al^{3+}_{(aq)}+3e^{-}[/tex]

For Lead, half-equation is reduction:

[tex]Pb^{2+}_{(aq)}+2e^{-} -> Pb_{(s)}[/tex]

Multiply first half-equation for 2 and second half-equation by 3:

[tex]2Al_{(s)} -> 2Al^{3+}_{(aq)}+6e^{-}[/tex]

[tex]3Pb^{2+}_{(aq)}+6e^{-} -> 3Pb_{(s)}[/tex]

Adding them:

[tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

The balanced redox reaction with cell notation [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex] is

[tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Answer:

Half life = 13.197 hour

Explanation:

Given:

Old amount (A₀) = 3.2

New amount (A) = 0.4

Radiation decay time (t) = 39.6 hour

Half life = T(1/2)

Find:

Half life = T(1/2) = T

Computation:

A = A₀[tex]e^{-(\frac{0.693t}{T} )}[/tex]

[tex]e^{-(\frac{0.693t}{T} )}[/tex] = 0.4 / 3.2

-[27.4428 / T] = In (0.125)

-[27.4428 / T] = -2.0794

[27.4428 / T] = 2.0794

T = 13.197

Half life = 13.197 hour

Answer:

pH = 3.49

Explanation:

We have a buffer system formed by a weak acid (HNO₂) and its conjugate base (NO₂⁻ coming from KNO₂). We can calculate the pH  of a buffer ssytem using the Henderson-Hasselbach equation.

pH = pKa + log [base] / [acid]

pH = -log Ka + log [NO₂⁻] / [HNO₂]

pH = -log 4.50 × 10⁻⁴ + log 0.290 M / 0.210 M

pH = 3.49

The pH of the solution containing 0.210 M nitrous acid (HNO₂) and 0.290 M potassium nitrite (KNO₂) is 3.49

We'll begin by calculating the the pKa of acid. This can be obtained as follow:

Acid dissociation constant (Ka) = 4.50×10¯⁴

pKa = –Log Ka

pKa = –Log 4.50×10¯⁴

pKa = 3.35

Concentration of HNO₂, [HNO₂] = 0.210 M

Concentration of KNO₂, [KNO₂] = 0.290 M

The pH of the solution can obtain by using the Henderson-Hasselbach equation as illustrated below:

pH = pKa+ log [NO₂⁻] / [HNO₂]

pH = 3.35 + log (0.290 / 0.210)

Thus, the pH of the solution is 3.49

Learn more: https://brainly.com/question/15911738

Answer:

The correct answer is - option B -  lowest b.p.... isobutane < acetone < isopropanol ...highest b.p.

Explanation:

Isobutane has lowest boiling point due to no hydrogen bonding and no diole to dipole interaction found in them. Isobutane only shows weak dispersion force.

Acetone has dipole dipole interaction but due to lack of Hydrogen bonding they have low boiling point than isopropanol but higher than isobutanol.

Isopropanol is the compound that has ability to form hydrogen bonding with other molecule its boiling point is maximum among all three.

Thus, the correct answer is - option B -  lowest b.p.... isobutane < acetone < isopropanol ...highest b.p.

Answer:

B. NH3 < PH3< CH4

Explanation:

Hello,

In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C  and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:

B. NH3 < PH3< CH4

Best regards.

Answer:

Explanation:

Answer in attached file .

Answer:

1. This reaction is: B. Endothermic.

2. When the temperature is increased the equilibrium constant, K: A. Increases.

3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.

Explanation:

Hello,

In this case, considering the images, we can state that the red color at high temperature is due to the presence of nitrogen dioxide (product) and the lower coloring is due to the presence of dinitrogen tetroxide (reactant) at low temperature.

With the aforementioned, we can conclude that the chemical reaction:

[tex]N_2O_4(g) \rightleftharpoons 2 NO_2(g)[/tex]

Is endothermic since high temperatures favor the formation of the product and the low temperatures favor the consumption of the the reactant. thereby:

1. This reaction is: B. Endothermic.

2. When the temperature is increased the equilibrium constant, K: A. Increases. In this particular case, since the dinitrogen tetroxide has 1 molecule and nitrogen dioxide two molecules in the chemical reaction, the entropy change should be positive, therefore, by increasing the T, the Gibbs free energy of reaction becomes more negative:

[tex]G=H-TS[/tex]

As Gibbs free energy becomes more negative, the equilibrium constant becomes bigger given their relationship:

[tex]K=exp(-\frac{\Delta G}{RT} )[/tex]

3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.

Regards.

Answer:

sodium hexachloroplatinate(IV)- Na2[PtCl6]

dibromobis(ethylenediamine)cobalt(III) bromide- [Co(en)2Br2]Br

pentaamminechlorochromium(III) chloride-[Cr(NH3)5Cl]Cl2

Explanation:

The formulas of the various coordination compounds can be written from their names taking cognisance of the metal oxidation state as shown above. The oxidation state of the metal will determine the number of counter ions present in the coordination compound.

The number ligands are shown by subscripts attached to the ligand symbols. Remember that bidentate ligands such as ethylenediamine bonds to the central metal ion via two donors.

Answer:

Zinc- anode

Copper- cathode

Sodium sulphate- salt bridge

Explanation:

A galvanic cell is an electrochemical cell in which electrical energy is produced by a spontaneous chemical reaction.

In the pictured galvanic cell, zinc is the anode since it looses electrons according to the reaction; Zn(s) -----> Zn^2+(aq) + 2e

Copper is the cathode as shown here; Cu^2+(aq) + 2e ----> Cu(s)

Sodium sulphate functions as the salt bridge. It keeps the both solutions neutral by ensuring charge balance in the both half cells.

Answer:

zinc=anode

copper=cathode

Explanation:

Answer:

your answer is given below

Explanation:

Take it stepwise, and you are going to have to look up the various heat values.

You have 36.5grams of ice, presumably at 0C.  You will need to add heat to take the ice at 0 C to water at 0 C. (Latent heat of melting)  Then you add in a different heat value to take the water at 0 C to water at 82.3 C. (Specific heat of water)

Add the two heat amounts together.

According to specific heat capacity, to calculate the amount of heat needed to melt ice given mass of ices is multiplied by specific heat of ice and the temperature change which it undergoes.

Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.

It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.

It is given by the formula ,

Q=mcΔT

Learn more about specific heat capacity,here:

https://brainly.com/question/28941910

#SPJ5

Answer:

(a) Chromatography

(b) DNA fingerprinting

(c) Origin

(d) Sweet C consists of more colours than sweet D.

  ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.

Explanation:

Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.

It can be used to determine the soluble constituents of a given mixture. And for purification purpose.

Answer:

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

Explanation:

Hello,

In this case, since the van't Hoff factor is related with the species that result from the ionization of a chemical compound, we can see that that

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

- Ammonium nitrate NH4NO3 dissociates in one ammonium ions and one nitrate ion, therefore, van't Hoff factor is 2 (correct).

- Sodium sulfate Na2SO4 dissociates in two sodium ions and one sulfate, therefore, van't Hoff factor is 3 (correct).

- Sucrose is not ionized, therefore, van't Hoff factor is 1 (correct).

Best regards.

Answer:1 )T2=134°C   2) T2=339.48°C. 3)

P=817.59 mmHg.

Explanation:

1.Given ;

pressure, P1 of neon gas = 0.646 atm

temperature, T1 =242oC + 273=515oC

Volume, V1 =515ml

Volume V2= 407ml

temperature , T 2= ?

Solution;

And at constant pressure, the volume cools at V2=407 mL at T2=?

From ideal gas equation, PV=nRT

V/T=constant

therefore

V1/V2=T1/T2 = T2=(V2 xT1)/V1

T2=(407 mL x 515 K)/515 mL= 407K.

T2= 407K -273= 134°C.   recall 0°C=273 K)

2..Given ;

pressure, P1 of neon gas = 0.633 atm

temperature, T1 =261oC + 273=534oC

Volume, V1 =694ml

Volume V2= 796ml

temperature , T 2= ?

Solution;

And at constant pressure, the volume expands  at V2=796mL at T2=?

From ideal gas equation, PV=nRT

V/T=constant

therefore

V1/V2=T1/T2 = T2=(V2 xT1)/V1

T2=(796 mL x 534 K)/694mL= 612.48K.

T2= 612.48K -273= 339.48°C. recall 0°C=273 K

3

Given;

moles of CO2= n=0.962 mol,

temperature T=20°C=20+273 K =293 K,

volume V=21.5 L,

gas constant R at L·mmHg/mol·K= 62.3637 L mmHg mol^-1 K^-1

Using  ideal gas equation PV=nRT

P=nRT/V

P=(0.962 mol)x(62.3637mmHg mol^-1 K^-1)x(293 K)/(21.5L)

P=817.59 mmHg.

Answer:

4.22

Explanation:

According to the question, the pOH of the solution is 9.78. You may recall that pOH is the hydroxide concentration of a solution.

Also pOH = -log[OH^-]. Hence the pOH is obtained from the hydroxide ion concentration.

Finally, pH + pOH =14

Hence;

pH = 14-pOH

pH= 14-9.78 = 4.22

pH= 4.22

Answer:its saturated   or  unsaturaded

Explanation:

Answer:

C. Gas

Explanation:

Answer:

CH4 < CH3CH3 < CH3CH2CH3

Explanation:

Alkanes are saturated aliphatic hydrocarbons that undergoes intermolecular Van der waals forces. Van der waals forces are the attractive forces which make it possible for non-polar molecules to form liquids and solids.

Van der waals force are described as intermolecular forces arising from induced fluctuating dipoles in atoms and molecules brought about by movement of electrons around the atomic nucleus.

An example of the Van der waals force is the  london dispersion force that occurs in the alkane family. It is the weakest of all electrical forces that act between atoms and molecules, These forces are responsible for liquefaction or solidification of non-polar substances at low temperature.

The strength of the intermolecular forces is based on the number of electrons surrounding the molecule and the surface area of the molecule. SO, in alkanes, the longer the carbon chain, the more stronger the intermolecular forces.

Answer:

4.84g of FeO is the theoretical yield

Explanation:

The Iron, Fe(s), reacts with oxygen, O₂(g), producing Iron (II) oxide, as follows:

2Fe(s) + O₂(g) → 2FeO

Theoretical yield is the yield of a reaction in which you assume the 100% of reactants is converted in products.

To find theoretical yield we need to find moles of Iron, and, knowing 2 moles of Fe produce 2 moles of FeO (Ratio 1:1), we can find theoretical yield of FeO as follows:

Moles Fe (Molar mass: 55.845g/mol)

Using the molar mass of the compound we can convert grams to moles, thus:

3.76g Fe × (1mol / 55.845g) = 0.0673 moles of Fe

Moles and mass of FeO

As there are in reaction 0.0673 moles Fe, assuming a theoretical yield (And as ratio of the reaction is 1:1), you will obtain 0.0673 moles of FeO.

Theoretical yield is given in grams, As molar mass of FeO is 71.844g/mol, theoretical yield of the reaction is:

0.0673 moles FeO × (71.844g / mol) =

Answer: [tex]\Delta S[/tex] = 473.92J/K.mol

Explanation: In physics, Entropy is defined as a degree of disorder in a system. Entropy change is given by the sum of all the products multiplied by their respective coeficients minus the sum of all the reagents multiplied by their respective coeficients:

[tex]\Delta S = m\Sigma product - n\Sigma reagent[/tex]

The balanced reaction:

[tex]H_{2}S_{(g)}+2H_{2}O_{(l)}=>3H_{2}_{(g)}+SO_{2}_{(g)}[/tex]

gives the proportion reagents react to form products, so, if 1.6 moles of [tex]H_{2}S_{(g)}[/tex]:

3.2 moles of water is used;

4.8 moles of hydrogen gas is formed;

1.6 moles of sulfur dioxide is also formed;

Calculating entropy change:

[tex]\Delta S = (4.8*131+1.6*248.8)-(1.6*205.6+3.2*70)[/tex]

[tex]\Delta S=628.8+398.08-328.96-224[/tex]

[tex]\Delta S[/tex] = 473.92J/K.mol

Entropy change for the given chemical reaction is [tex]\Delta S[/tex] = 473.92J/K.mol

Answer:

The final temperature of the entire water sample after all the ice is melted, is 12,9°C. We should realize that if there is no loss of heat in our system, the sum of lost or gained heat is 0.  It is logical to say that the temperature has decreased because the ice gave the water "heat" and cooled it

Thats all i know