What differences does distillation rely on to separate out parts of a solution?
O A. Different densities
O B. Different molecular masses
C. Different boiling points
O D. Different molecular sizes

Answer:

(S)-3-chloro-2,3-dimethylpentane

Explanation:

When sodium chloride is treated with bromo dimethylpentane in presence of water, then chloro dimethylpentane is formed. This chemical reaction is stable reaction in water because of its solvency.

Answer:

C₃H₆O₃

Explanation:

To solve this question we need to find, as first, the moles of each atom in order to find empirical formula (Simplest whole-number ratio of atoms present in a molecule).

With the molar mass of the substance and the empirical formula we can find the molecular formula as follows:

Moles C -Molar mass:12.0g/mol-

0.24g * (1mol/12.0g) = 0.020 moles C

Moles H = Mass H because molar mass = 1g/mol:

0.040 moles H

Moles O -Molar mass: 16g/mol-

Mass O: 0.60g - 0.24g - 0.040g = 0.32g O

0.32g O * (1mol/16g) = 0.020 moles O

Ratio of atoms (Dividing in moles of C: Lower number of moles):

C = 0.020 moles C / 0.020 moles C = 1

H = 0.040 moles H / 0.020 moles C = 2

O = 0.020 moles O / 0.020 moles C = 1

Empirical formula:

CH₂O.

Molar mass CH2O:

12g/mol + 2*1g/mol + 16g/mol = 30g/mol

As molecular formula has a molar mass 3 times higher than empirical formula, the molecular formula is 3 times empirical formula:

The molecular formula of the organic acid would be C3H6O3

Molecular formula = [empirical formula]n

Where n = molar mass/mass of empirical formula

Empirical formula

C = 0.24/12 = 0.02

H = 0.040/1 = 0.04

O = 0.6 - (0.24+0.04) = 0.32/16 = 0.02

Divide by the smallest

C = 1

H = 2

O = 1

Empirical formula = CH2O

Empirical formula mass = 12 + 2 + 16 = 30

n = 90/30 = 3

Molecular formula = [CH2O]3

                               = C3H6O3

More on molecular formula can be found here: https://brainly.com/question/1247523

Answer:

At higher temperatures, particles move faster and collide more, increasing solubility rates.

Agitation increases solubility rates as well, by bringing fresh solvent into contact with the undissolved solute

The smaller the particle size, the higher (faster) solubility rate. Vice versa, the bigger the particle size, the lower (slower) solubility rate.

Explanation:

Answer:

La temperatura final del sistema es 1029,346 °C.

Explanation:

Asumamos que el sistema conformado por el cobre y el estaño no tiene interacciones con sus alrededores. Por la Primera Ley de la Termodinámica, el cobre cede calor al estaño con tal de alcanzar el equilibrio térmico. El cobre se encuentra inicialmente en su punto de fusión, mientras que el estaño está por encima de ese punto, de modo que la transferencia de calor es esencialmente sensible:

[tex]m_{Cu}\cdot c_{Cu}\cdot (T-T_{Cu}) = m_{Sn}\cdot c_{Sn}\cdot (T_{Sn}-T)[/tex]

[tex](m_{Cu}\cdot c_{Cu} + m_{Sn}\cdot c_{Sn})\cdot T = m_{Sn}\cdot c_{Sn}\cdot T_{Sn} + m_{Cu}\cdot c_{Cu}\cdot T_{Cu}[/tex]

[tex]T = \frac{m_{Sn}\cdot c_{Sn}\cdot T_{Sn}+m_{Cu}\cdot c_{Cu}\cdot T_{Cu}}{m_{Cu}\cdot c_{Cu}+m_{Sn}\cdot c_{Sn}}[/tex] (1)

Donde:

[tex]m_{Sn}[/tex] - Masa del estaño, en gramos.

[tex]m_{Cu}[/tex] - Masa del cobre, en gramos.

[tex]c_{Sn}[/tex] - Calor específico del estaño, en calorías por gramo-grados Celsius.

[tex]c_{Cu}[/tex] - Calor específico del cobre, en calorías por gramo-grados Celsius.

[tex]T_{Sn}[/tex] - Temperatura inicial del estaño, en grados Celsius.

[tex]T_{Cu}[/tex] - Temperatura inicial del cobre, en grados Celsius.

Si sabemos que [tex]m_{Cu} = 150\,g[/tex], [tex]m_{Sn} = 35\,g[/tex], [tex]c_{Cu} = 0,093\,\frac{cal}{g\cdot ^{\circ}C}[/tex], [tex]c_{Sn} = 0,060\,\frac{cal}{g\cdot ^{\circ}C}[/tex], [tex]T_{Sn} = 560\,^{\circ}C[/tex] y [tex]T_{Cu} = 1100\,^{\circ}C[/tex], entonces la temperatura final del sistema es:

[tex]T = \frac{(35\,g)\cdot \left(0,060\,\frac{cal}{g\cdot ^{\circ}C} \right)\cdot (560\,^{\circ}C)+(150\,g)\cdot \left(0,093\,\frac{cal}{g\cdot ^{\circ}C} \right)\cdot (1100\,^{\circ}C)}{(35\,g)\cdot \left(0,060\,\frac{cal}{g\cdot ^{\circ}C} \right)+(150\,g)\cdot \left(0,093\,\frac{cal}{g\cdot ^{\circ}C} \right)}[/tex]

[tex]T = 1029,346\,^{\circ}C[/tex]

La temperatura final del sistema es 1029,346 °C.

Answer:

second law of thermodynamics

Explanation:

According to the second law of thermodynamics, the total entropy of a system and its surroundings always increases for a spontaneous process.

Entropy is defined as the degree of disorderliness of a system. The entropy of a system never remains constant. It either increases or decreases in a process. The total entropy is the sum of the entropy of the system and its surrounding. The total entropy must increase in a spontaneous process.

Thus, the implication of this law is that even, if the entropy of a system decreases, this must be compensated for by increase in entropy of the surroundings in order for the process to be spontaneous.

Answer:

Nitrate NO3

here's your answer, hope it helps you

The various factors that impact the solubility of substances in water are - nature of solute and solvent, temperature, pressure and pH.

The solubility of substances in water is influenced by several factors:

Learn more about Solubility, here:

https://brainly.com/question/31493083

#SPJ2

Answer:

Explanation:

Atomicity is defined as the total number of atoms present in a molecule.

Answer:

mainly metal oxide use to react with both acid and bases to form salts such as zinc, aluminum etc.

Answer:

E = 8085 kJ

Explanation:

Given that,

The mass of a truck, m = 1500 kg

Height, h = 550 m

We need to find the gravitational potential energy of the truck. It can be calculated as follows :

[tex]E=mgh[/tex]

Put all the values,

[tex]E=1500\times 9.8\times 550\\\\E=8085000\ J\\\\or\\\\E=8085\ kJ[/tex]

So, the gravitational potential energy is 8085 kJ.

Answer:

The less electronegative atom

Explanation:

Water contains polar bonds. Water is made up of oxygen and hydrogen. Oxygen is more electronegative then hydrogen so it is partial negative (because electron spend more time around oxygen in the polar bond), whereas, hydrogen has a  partial positive charge as it is less electronegative (electrons spend less time around hydrogen in this polar bond).

Answer:

88.9%

Explanation:

Primero convertimos 5.97 g de glucosa a moles, usando su masa molar:

Después calculamos la cantidad máxima de moles de CO₂ que se hubieran podido producir:

Ahora calculamos los moles de CO₂ producidos, usando los datos de recolección dados y la ecuación PV=nRT:

Finalmente calculamos el rendimiento porcentual:

Answer: The statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.

Explanation:

A chemical reaction in which heat energy  is released is called an exothermic reaction. For exothermic reactions, the value of [tex]\Delta H[/tex] is always negative.

A chemical reaction in which heat energy is absorbed is called an endothermic reaction. For endothermic reaction, the value of [tex]\Delta H[/tex] is always positive.

In endothermic reactions, energy required for breaking the bonds between reactants is less than the energy when products are formed due to which the value of [tex]\Delta H[/tex] remains positive.

Thus, we can conclude that the statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.

It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed. The correct option is B.

The above reaction is endothermic because more energy is produced when new bonds form in the products (H = 920 kJ/mol) than is required to break bonds in the reactants (H = -750 kJ/mol).

In an endothermic process, more energy than is generated during bond creation is absorbed from the environment to dissolve existing bonds. This causes a net absorption of energy, which cools the system.

The reaction takes more energy than it releases, proving its endothermic nature, as seen by the positive difference between the energy needed to dissolve bonds and the energy released during bond formation.

Thus, the correct option is B.

For more details regarding endothermic process, visit:

https://brainly.com/question/28909381

#SPJ3

Your question seems incomplete, the probable complete question is:

During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)

Group of answer choices

A. It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.

B. It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.

C. It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.

D. It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.

Answer: There are 20 milliliters of 1.0 M HCl is required to be diluted to make 200 mL of a 0.1 M solution.

Explanation:

Given: [tex]M_{1}[/tex] = 1.0 M,    [tex]V_{1}[/tex] = ?

[tex]M_{2}[/tex] = 0.1 M,    [tex]V_{2}[/tex] = 200 mL

Formula used is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute values into the above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\1.0 M \times V_{1} = 0.1 M \times 200 mL\\V_{1} = \frac{0.1 M \times 200 mL}{1.0 M}\\= 20 mL[/tex]

Thus, we can conclude that there are 20 milliliters of 1.0 M HCl is required to be diluted to make 200 mL of a 0.1 M solution.

Answer:

Danger

Explanation:

Answer:

1.99 L

Explanation:

Given that,

A reaction produces 3.0 mol of gas, which occupies 1.46 L.

We need to find the volume of the product when 4.1 mol are produced at constant temperature and pressure.

We know that,

PV = nRT

i.e.

[tex]V\propto n\\\\\dfrac{V_1}{V_2}=\dfrac{n_1}{n_2}\\\\V_2=\dfrac{V_1n_2}{n_1}\\\\V_2=\dfrac{1.46\times 4.1}{3}\\\\V_2=1.99\ L[/tex]

So, the new volume is 1.99 L.

Answer:

HOPE IT helps much as you can

Answer:

a little less than 109.5°

Explanation:

SCl2 has four regions of electron density around the central atom of the molecule. This implies that it has a tetrahedral electron domain geometry with an expected bond angle of 109.5° according to valence shell electron pair repulsion theory.

However, there are two lone pair of electrons on the central atom of the molecule which decreases the bond angle a little less than 109.5° owing to repulsion between electron pairs.

Answer:

14

73%

Explanation:

The mean Number of years worked :

. (sum of service years) / employees in the

(8+13+15+3+13+28+4+12+4+26+29+3+10+3+17+13+15+15+23+13+12+1+14+14+17+16+7+27+18+24) /

(417 / 30)

= 13.9 years

= 14 years

The percentage of employees who have worked for atleast 10 years :

Number of employees with service years ≥ 10 years = 22 employees

Total number of employees

Percentage (%) = (22 / 30= * 100% = 0.7333 * 100% = 73.33% = 73%

Answer:

7.640 kg

Explanation:

Step 1: Write the balanced complete combustion equation for ethanol

C₂H₆O + 3 O₂ ⇒ 2 CO₂ + 3 H₂O

Step 2: Calculate the moles corresponding to 4 kg (4000 g) of C₂H₆O

The molar mass of C₂H₆O is 46.07 g/mol.

4000 g × 1 mol/46.07 g = 86.82 mol

Step 3: Calculate the moles of CO₂ released

86.82 mol C₂H₆O × 2 mol CO₂/1 mol C₂H₆O = 173.6 mol CO₂

Step 4: Calculate the mass corresponding to 173.6 moles of CO₂

The molar mass of CO₂ is 44.01 g/mol.

173.6 mol × 44.01 g/mol = 7640 g = 7.640 kg

Answer:

The solution is 0.450 M. How many mL are needed?

- 0.667 mL

Explanation:

Answer: If matter goes through a chemical change then the physical properties are not likely to stay the same.

Explanation:

When chemical composition of a substance changes during a chemical reaction then it is called a chemical change.

Chemical change always leads to the formation of new substances. Properties like chemical reactivity, combustion, rusting etc are chemical changes.

For example, [tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]

Here, [tex]NH_{3}[/tex] will have different chemical as well as physical properties as compared to [tex]N_{2}[/tex] and [tex]H_{2}[/tex].

As physical properties are the properties that cause change in state of a substance.

Properties like boiling point, state of substance etc are physical properties.

Thus, we can conclude that if matter goes through a chemical change then the physical properties are not likely to stay the same.

Answer:

108.6 g

Explanation:

First we use the PV=nRT formula to calculate the number of nitrogen moles:

Inputting the data:

Then we convert 2.5 moles of N₂ into moles of NaN₃, using the stoichiometric coefficients of the balanced reaction:

Finally we convert 1.67 moles of NaN₃ into grams, using its molar mass:

Answer:

243.75 mL

Explanation:

In 1min 32.5 mL of oxygen

In 7.5 min electrolysis of water produces

(32.5mL × 7.5 min)/ 1min

= 243.75mL

Answer:

2.The reaction is third order overall

Explanation:

THIS ANSWER IS CORRECT

MARK ME AS BRAINLIEST

Explanation:

a) Since this is a double displacement reaction, we write the balanced equation as

[tex]2AgNO_3(aq) + CaCl_2(aq) \\ \rightarrow 2AgCl(s) + Ca(NO_3)_2(aq)[/tex]

b) Next we find the number of moles of AgNO3 in the solution.

[tex](0.005\:\text{L})(0.500\:M\:AgNO_3) \\ = 0.0025\:\text{mol}\:AgNO_3[/tex]

Next, use the molar ratio to find the necessary amount of CaCl2 to react with the AgNO3:

[tex]0.0025\:\text{mol}\:AgNO_3× \left(\dfrac{1\:\text{mol}\:CaCl_2}{2\:\text{mol}\:AgNO_3} \right)[/tex]

[tex]= 0.00125\:\text{mol}\:CaCl_2[/tex]

The volume of 0.500 M solution of CaCl2 necessary to react all of the given AgNO_3 is then

[tex]V = \dfrac{0.00125\:\text{mol}\:CaCl_2}{0.500\:\text{M}\:CaCl_2}[/tex]

[tex]= 0.0025\:\text{L} = 2.5\:\text{mL}\:CaCl_2[/tex]

c) The theoretical yield can then be calculated as

[tex]0.0025\:\text{mol}\:AgNO_3 × \left(\dfrac{2\:\text{mol}\:AgCl}{2\:\text{mol}\:AgNO_3} \right)[/tex]

[tex]= 0.0025\:\text{mol}\:AgCl[/tex]

Converting this amount of AgCl into grams, we get

[tex]0.0025\:\text{mol}\:AgCl × \left(\dfrac{143.32\:\text{g}\:AgCl}{1\:\text{mol}\:AgCl} \right)[/tex]

[tex]= 0.358\:\text{g}\:AgCl[/tex]

answer; 1/ 20_2[2-] +2e - ->0.