Answer:
The purpose of a science experiment is to prove or deny a hypothesis. One's experiment is not a failure if the results do not match the hypothesis. When the data does not support the hypothesis, record it as though it did.
Answer:
when the findings do not aligh with the hypothesis
definition of scientific varable
Answer:
a scientific variable is a factor or condition that can change or effect the final outcome. There are three types being an independent variable, dependent variable, and controlled variable.
As discussed during the lecture, the enzyme HIV-1 reverse transcriptae (HIV-RT) plays a significant role for the HIV virus and is an important drug target. Assume a concentration [E] of 2.00 µM (i.e. 2.00 x 10-6 mol/l) for HIV-RT. Two potential drug molecules, D1 and D2, were identified, which form stable complexes with the HIV-RT.
The dissociation constant of the complex ED1 formed by HIV-RT and the drug D1 is 1.00 nM (i.e. 1.00 x 10-9 mol/l). The dissociation constant of the complex ED2 formed by HIV-RT and the drug D2 is 100 nM (i.e. 1.00 x 10-7 mol/l).
1. Compute the total concentration of [D1]tot that is needed to bind 90% of the HIV-RT at the given concentration [E]tot. Provide your answer as a numerical expression with 3 significant figures in the unit mol/l. You do NOT have to consider competition betwwen the drugs D1 and D2! They are administered separately.
2. Compute the total concentration of [D2]tot that is needed to bind 90% of the HIV-RT at the given concentration [E]tot. Provide your answer as a numerical expression with 3 significant figures in the unit mol/l.You do NOT have to consider competition betwwen the drugs D1 and D2! They are administered separately.
Answer:
C)[D]/[ED] = 5.20
D)[D]/[ED] = 5.20
E)[D']_T = 1.495* 10 ^-7 M
F)[D'] / [ED'] = 0.0579
Explanation:
E = 250 nM =2.5* 10 ^-7 mol/L , T=298.15 K
Dissociation constant of K_D = 1.3 μM (1.3 *10 ^-6 M)
E + D ⇄ ED → K_a = [ED] / [D][E] (association constant)
ED ⇄ E + D → K_D = [E][D] / [ED] (dissociation constant)
C)
[E] =2.5*10^-7 mol/L
K_D = 1.3* 10^-6 M
K_D = [E][D] / [ED] → [D]/[ED] = K_D / [E]
= [D]/[ED] = 1.3* 10 ^-6 / 2.5 *10^-7
= 13/25 * 10
=130/25 = 5.20
[D]/[ED] = 5.20
D)
ΔG =RTln Kd
ΔG_2 for E and D = 1.987 * 298.15 * ln 1.3*10^-6
ΔG_2 592.454 * [ln 1.3 +ln 10^-6]
ΔG_1 = 592.424 [0.2623 - 13.8155]
ΔG_2 = -592.424 * 13.553
ΔG_1 = -8184.633 cal/ mol
ΔG_1 = -8184.633 * 4.18 J/mol = -34244.508 J?mol
ΔG_1 = -34.245 KL/mol
so, ΔG_2 = ΔG_1 - 10.5 KJ/mol
ΔG_2 = -34.245 - 10.5
ΔG_2 = -44.745KJ / mol
ΔG_2 =RT ln K_D
-44.745 *10^3
=8.314 *298.15 lnK_D
lnK_D' = - 44745 / 2478.81 g
ln K_D' = -18.051
K_D' = -18.051
K_D' = e^-18.051
[D]/[ED] = 5.20
E)
[E] = 2.5* 10 ^-7 mol/ L = a
K_D' = [E][D] / [ED'] E +D' → ED'
K_D' = a/2(x-(a/2) / (a/2)
KD' = x - a/2
=2.447 *10^-8 = (2.5/2) * 10^-7
x=2.447 * 10^-8 + 1.25 * 10^-7
x = 2.447 *10^-8 + 1.25 * 10 ^-7
x= 10^-7 [1.25 + 0.2447]
x = 1.4947 * 10^-7
[D']_T = 1.495* 10 ^-7 M
F)
K_D' = [E][D'] / [ED']
[D'] / [ED'] = KD' / [E]
[D'] / [ED'] = 1.447 *10^-8 / 2.5* 10^-7
[D'] / [ED'] = 0.5788 * 10^-1
[D'] / [ED'] = 0.0579
Explanation:
...
help me plz this is import this thing is late and comfusing i can give you vrainliest
Answer:
can you please mark me brainliest pleaseEstimating Circle the correct answer
1. Gas is $5.00 for 2 gallons and you want to fill your almost full gas tank which can hold an additional 1.5 gallons, you will spend a) $5.00 b) less than $5.00 c) more than $5.00
To fill your almost full tank with additional 1.5 gallons, you will spend less than $5.00
According to the question;
2 gallons of gas cost $5.00
Recall that your tank is almost full and what you need is additional 1.5 gallons.
If;
2 gallons of gas cost $5.00
1.5 gallons cost 1.5 * 5.00/2 = $ 3.75
$ 3.75 is less than $5.00 hence the correct answer is option B: less than $5.00.
Learn more: https://brainly.com/question/13114933
If the average speed of a helium atom at a certain temperature is 1110 m/s, what is the speed in miles per hour? (1 mi = 1609 m)
please help and show how its done
Answer: 2483 miles/hour
Explanation:
[(1 mile/1609 meters) = 0.0006215 miles/meter]
(1110meters/sec)*(0.0006215 miles/meter)*(3600 secs/hour) = 2483 miles/hour!
Note how the units cancel to yield miles/hour. Use the units to determine what conversion factors are needed. We know that the final unit was to be miles/hour, so we converted meters into miles (firsy line) so that the meters would cancel, leaving only miles. Same for seconds and hour (3600 secs/hour).
Someone answer this for me ty
Answer:
The answer for this is (B: Heat)
Which is larger aliter or a quart?
Answer:
a liter is larger, hope that helps :)
How many decigrams (dg) are in 0.779 kg?
Answer:
7790
Explanation:
Answer:
7790 decigrams
Explanation:
conversion from 76 pounds to 1 gram
Answer:
76 Pounds = 34,473,020 Grams
Answer:
76 Pounds = 34,473,020 Grams
Explanation:
becuase one pound weighs 453.592 grams so i just added up
What is the correct way to smell a chemical
Answer:
If you need to smell the odor of a chemical, waft or fan the fumes toward your nose with one hand. Do not put your nose over the container and inhale the fumes.
What is the volume of sodium hydroxide,
NaOH solution used to neutralised 25.00 mL
of 0.1500 M hydrocloric acid, HCI?
Answer:
sorry i don't know this question answeer
You can separate sugar from Sand because sugar is and sand is not what does sugar have that stand don't??? Help please
Move the following term into the correct category
mixture
pure substance
Possible answers:
compound
air
salt in water
H2O
soda
element
Answer:
Explanation:
*Mixture this is the mixing of two or more substances by physical means.
*Pure substance are substance that can not be spotted by ordinary physical means.
*Compound are substance that combine by chemical means.
* Air is are mixture of gass with different percentage..they have no general molecular formula.
* This is the ability for a salty compound to ionize in water.
* Formula for water.
* Compound containing sodium , carbon and oxygen.
*This are pure substance that can not be spited by ordinary chemical means.
The distance of 24 km equals:
O 2.4x104 m
O 2.4x10-1 m
O 2.4x103 m
2.4x10-2 m
2.4x102 m
Answer:
2.4* 10⁴ m
Explanation:
1km = 1000m = 10³m
(1*24)km = 10³ * 24 m
=> 24km = 2.4 * 10⁴m
'How many atoms are in 2.45 moles of copper?
2.46 × 1023 atoms
2.45 atoms
155.70 atoms
1.48 × 1024 atoms
Answer:
[tex]\boxed {\boxed {\sf 1.48 \times 10^{24} \ atoms \ Cu}}[/tex]
Explanation:
We are asked to find how many atoms are in 2.45 moles of copper (Cu).
We can convert moles to atoms using Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this case, the particles are atoms of copper. There are 6.022 × 10²³ atoms of copper in 1 mole of copper.
We will convert using dimensional analysis, so we must set up a ratio using Avogadro's Number.
[tex]\frac {6.022 \times 10^{23}\ atoms \ Cu}{ 1 \ mol \ Cu}[/tex]
We are converting 2.45 moles of copper to atoms, so we multiply the ratio by this value.
[tex]2.45 \ mol \ Cu*\frac {6.022 \times 10^{23}\ atoms \ Cu}{ 1 \ mol \ Cu}[/tex]
The units of moles of copper cancel.
[tex]2.45*\frac {6.022 \times 10^{23}\ atoms \ Cu}{ 1}[/tex]
The denominator of 1 is the same as the numerator by itself, so it can be ignored.
[tex]2.45* {6.022 \times 10^{23}\ atoms \ Cu}[/tex]
[tex]1.47539 \times 10^{24} \ atoms \ Cu[/tex]
The original measurement of moles (2.45) has 3 significant figures, so our answer must have the same. For the number we found that is the hundredth place. The 5 in the thousandth place to the right tells us to round the 7 up to an 8.
[tex]1.48 \times 10^{24} \ atoms \ Cu[/tex]
There are approximately 1.48 × 10²⁴ atoms of copper in 1 mole of copper.
Answer:
[tex]:\implies \rm Moles =\dfrac{No. \: of \: atoms}{Avogadro's \: number} \\ [/tex]
[tex]:\implies \rm M =\dfrac{N}{N_A} \\ [/tex]
[tex]:\implies \rm N=M \times N_A \\ [/tex]
[tex]:\implies \rm N=2.45\times6.022 \times {10}^{23} \\[/tex]
[tex]:\implies \rm N=14.7539\times {10}^{23} \\[/tex]
[tex]:\implies \rm N=1.47539\times 10^1\times {10}^{23} \\[/tex]
[tex]:\implies\textsf{ \textbf{N = 1.48$\times${10}$^{24}$}} \\[/tex]
What will form when we add Co2 plus H20.
help me please. i wil mark you brainlist.
if your answer helps me i will add your name and tells other to follow you
Answer:
CO² + H²O ---------). H²CO³answer is this. all the numbers above alphabet will be bellow. while writing remember
Explanation:
CO² mean Carbon dioxide
H2O mean Water
H²CO³ mean Carbonic acid
Carbon dioxide+H²O = Carbonic acid
mark me brainlist if it helps
What is Iron's atomic number and the number of protons?
Answer:
In February, we have selected iron, the most abundant element on Earth, with chemical symbol Fe (from the Latin word “ferrum”) and atomic number 26. A neutral iron atom contains 26 protons and 30 neutrons plus 26 electrons in four different shells around the nucleus.
Answer:
Iron's atomic number is 26 and it has 26 protons
Use the blue slider labeled mass to carefully adjust the mass of the red block until neither sinks nor floats. The block should stay wherever your cursor places it without moving up or down. Next remove the block from the water and put it in the scale. Record its new mass.
Answer:
4.1 grams
Explanation:
Answer:
4.1
I solve this solution and then i got correct on it so its 4.1 thank you!
How many atoms of hydrogen are there in 36 g of NH4NH4?
explain in detail plz
Answer:
he formula mass of ammonia is 14 + 1 3 = 17. The number of moles in 36 g ammonia is 36/ 17 = 2.11mol. A mole is 6.02 10, so the number of hydrogen atoms in a 2.11 moles of ammonia is 2.11 *6.02*10^23 = 1.27 *10^24 atoms
Explanation:
Convert 30.0 mºto cm3.
O 3.00x105 cm
3.00x103 cm
3.00x105 cm
3.00x107 cm
3.00x 103 cm
Answer:
3.00x107 cm
Explanation:
They answer would be the 4th one
A 0.10 L solution with 1.85 g of Ca(OH)2 is of what concentration, in molarity?
Answer:
0.25M
Explanation:
The formula of concentration is c=m/M•V
c=1.85g/74g.mol•0.10L
c=0.25 M
A vessel initially containing 1 kmol of CO and 4.76 kmol of dry air forms an equilibrium mixture of CO2, CO, O2, and N2 at 3000 K, 1 atm. Determine the equilibrium composition.
Answer:
Equilibrium composition for, no2 =.7365
The equilibrium composition for, nN2=3.76
Explanation:
40 points Critical Thinking Questions
8. Two of the following six numbers are written incorrectly. Circle the two that are incorrect.
What do you think is wrong about the two numbers you circled?
Its option e
Why?
[tex]\\ \sf\longmapsto 0.000354\times 10^4[/tex]
It can be written as
[tex]\\ \sf\longmapsto \dfrac{354}{10000}\times 10^4[/tex]
[tex]\\ \sf\longmapsto \dfrac{354}{10^4}\times 10^4[/tex]
Cancel 10^4[tex]\\ \sf\longmapsto 354[/tex]
Hence its wrongly written
d is also wrong
[tex]\\ \sf\longmapsto 75.3\times 10^2[/tex]
[tex]\\ \sf\longmapsto \dfrac{753}{10}\times 100[/tex]
[tex]\\ \sf\longmapsto 7530[/tex]
Its need not be simplified .What number will go on the top when writing isotopic notation for Carbon-13?
Answer:
1? I guessed and I'm practicing on this stuff because I am new and I still need to learn this stuff
Please help me!!!!!!
Answer:
17.8ml-15.6ml is 2.2 ml then convert to cm so 2.2cm^3
Which statement describes a property of a proton?
O is found outside the nucleus
O has a positive charge
O has less mass than an electron
O is repelled by electrons
Answer:
has a positive chargeExplanation:
An atom is an indivisible particle and it is composed of mainly three sub atomic particles, they are protons, electrons and neutrons. The proton has a positive charge. The correct option is B.
What are sub subatomic particles?The particles which are smaller in size than an atom are defined as the subatomic particles. The positively charged subatomic particles are called the protons whereas the negatively charged particles are called electrons and neutrons are chargeless.
It is the protons and neutrons which together make up the nucleus of an atom and hence they are called the nucleons. The number of protons or electrons in an atom is known as the atomic number and the mass of proton is 1.676 × 10⁻²⁴ grams.
It was Rutherford who discovered the protons and the charge of proton is + 1.602 × 10⁻¹⁹ Coulombs.
Thus the correct option is B.
To know more about protons, visit;
https://brainly.com/question/17298811
#SPJ7
How do I convert 1 times 10 to the 20th power seconds to years. Dimensional analysis? 1x10^20 seconds to years
To convert a second measurement to a year measurement, divide the time by the conversion ratio.
Since one year is equal to 31,556,952 seconds, you can use this simple formula to convert:
years = seconds ÷ 31,556,952
1 ×10^20 sec to years = 3.16887646 × 10^12 years
trong chuẩn độ, dung dịch có nồng độ chưa biết là định nghĩa của?
Answer:
skip it please, ok...? thank you
A patient is required to take an IV drug for cancer treatment. The required dosage is 5.0 mg drug her lb patient body weight every day. Each of the bags of the drug contains 250 mg drug. If you are treating a 150 lb patient,How many bags of the drug are needed each day.
Answer:
3 bags are required.
Explanation:
Find the number of mg needed for 150 pounds
150 pounds * 5 mg/pound = 750 mg
1 bag = 250 mg
x bags = 750 mg Cross multiply
250 * x= 750 Divide by 250
x = 750/250
x = 3
How can we explain the abrupt change from solid to gas that we see between the elements
carbon and nitrogen?
24.04.2021
Science
Junior High School
answered
8. What happened to the molecules when there is change from solid to gas state?
a. The molecules are deposited on cold surface.
b. The molecules are heated.
c. The molecules are bonded with a strong force.
d. All of the above.
9. What can you infer from an ice cube left at an open air?
a. There is a transformation process from solid to liquid.
b. There is a transformation process from liquid to solid.
c. Melting takes place when the temperature is higher.
d. There is no observable process taking place.
10. Which of the following illustrates that gas turns into liquid?
a. melting of ice
b. . steam from boiling water
Gases can be liquified or sublimed to solids. The reverse can also be done. Carbon and nitrogen gases can be formed from their solid state on burning fossil fuels and other decomposing materials under high pressure.
What is sublimation?Sublimation is the physical process of conversion of a material from its solid state to gaseous phase or vice versa. These physical changes involves no bond making or bond breaking.
Non-metals such as carbon, oxygen, nitrogen etc are exists in gaseous state. However they can be liquified under high pressure and low temperature. This process is called condensation.
Some gases can be even converted to solids by extremely high pressure and very low temperature. Solids can be melted into liquids. Similarly they can be converted into gaseous state. But the gases have the tendency to be gaseous form and they form the condensed state at high pressure only
Burning he carbonaceous materials such as fossil fuels evolves carbon gas. We know the evolvement of carbon dioxide from the soda bottle. Similar way, when the pressure is released, solid carbon and nitrogen can be released into their gaseous form.
To find more about sublimation, refer the link below:
https://brainly.com/question/28626755
#SPJ2
