The ATCS rule reduces to different values depending on the values of K1 and K2.
The ATCS rule uses a weighted formula that considers both the minimum slack time and setup times, with the weights determined by the values of K1 and K2. If both K1 and K2 are large, then the weighted processing time becomes the determining factor in the rule.
Below are the specific values for different scenarios:
(a) If both K1 and K2 go to infinity, the ATCS rule reduces to the SPT rule. In this case, the processing time is the only factor that determines the order in which the jobs are processed.
(b) If K1 is very close to 0 and K2 = 1, the ATCS rule reduces to the EDD rule. In this case, the jobs are prioritized based on their due date, with the earliest due date jobs processed first.
(c) If K2 is very close to 0 and K1 = 1, the ATCS rule reduces to the CR rule. In this case, the jobs are prioritized based on their critical ratio, which is the ratio of time remaining until the due date to processing time. Jobs with lower critical ratios are processed first.
The ATCS rule uses a weighted formula that considers both the minimum slack time and setup times, with the weights determined by the values of K1 and K2. If both K1 and K2 are large, then the weighted processing time becomes the determining factor in the rule.
Thus the ATCS rule reduces to different values depending on the values of K1 and K2.
learn more about ATCS rule here:
https://brainly.com/question/31640516
#SPJ11
t/f Magazines are the second-largest medium in terms of advertising revenue.
Answer:
the answer is true my man
Explanation:
In the United States, most newspaper advertising revenue comes from national advertisers, such as department stores. Combination rates are often available for placing a given ad in two or more newspapers owned by the same publisher.
Under what two conditions will the bonus and goodwill methods of recording the admission of a partner yield the same result?
The bonus and goodwill methods of recording the admission of a partner will yield the same result under the following two conditions:
1. When there is no bonus or goodwill involved: If the new partner is admitted without any bonus paid to the existing partners or any goodwill being recorded, both methods will result in the same outcome. In this case, the new partner's capital contribution will be equal to their share of the existing partners' capital balances.
2. When the bonus and goodwill amounts are equal: If the bonus paid to the existing partners and the recorded goodwill amount for the new partner are exactly equal, both methods will produce the same outcome. This means that the total increase in the firm's net assets is distributed among the partners in the same proportion as their capital contributions, regardless of whether it is recognized as bonus or goodwill.
In these scenarios, the specific method used to record the admission of the partner (bonus or goodwill) will not affect the final distribution of profits and ownership among the partners.
To know more about goodwill:
brainly.com/question/30637745
#SPJ11
Which one of the following is NOT included in cash flow from assets?
A. accounts payable
B. inventory sales
C. interest expense
D. cash account
Option A is the correct answer.The cash flow from assets (CFA) is the sum of all cash inflows and outflows to and from a company's assets. The CFA calculates the cash generated by the company's assets, while the cash flow from operations (CFO) measures the cash generated by the company's operating activities. It measures the cash inflows and outflows associated with the firm's assets, such as property, plant, and equipment, and is used to determine a firm's net investment in its asset base.A company's assets are the primary source of cash inflows and outflows, and the company's assets generate the company's revenues. The cash inflows and outflows associated with the company's assets are used to calculate the CFA, which is not the case with accounts payable. Therefore, the correct answer is A. Accounts payable is not included in cash flow from assets.
A call option with an exercise price of $70 and three months to expiration has a price of $4.10. The stock is currently priced at $69.80, and the risk-free rate is 5 percent per year, compounded continuously. What is the price of a put option with the same exercise price?
The price of the put option with the same exercise price is approximately $3.27.
This is calculated using the put-call parity formula and the given information of the call option price, stock price, risk-free rate, and time to expiration. By rearranging the formula and calculating the present value of the exercise price, we can determine the put option price. The put option acts as an insurance against a decline in the stock price, allowing the holder to sell the stock at the exercise price even if it falls below that level.
Learn more about approximately here;
https://brainly.com/question/30707441
#SPJ11
HEEELP PLEASEEE!!
accaunting
The will be used to identify which of the proposed computer models is the best model for the data. A. selection set B. test set C. training set D. validation set
The correct answer is option D. validation set. The validation set will be used to identify which of the proposed computer models is the best model for the data.
In the process of selecting the best computer model for the data, a validation set plays a crucial role. The validation set is a subset of the data that is withheld from both the training and testing phases. It is used to assess the performance and generalization ability of different models. By evaluating the models on the validation set, researchers or practitioners can compare their performance and select the one that demonstrates the best results. This helps in minimizing overfitting and ensuring that the chosen model will perform well on unseen data. The validation set acts as an independent benchmark to guide the decision-making process and enhance the reliability of the chosen model.Hence, The correct answer is option D. validation set. The validation set will be used to identify which of the proposed computer models is the best model for the data.
For more questions on validation set :
https://brainly.com/question/24168623
#SPJ8
The correct answer is D. validation set. In accounting, a validation set is used to identify the best model for the data.
Explanation:The correct answer is D. validation set.
In accounting, a validation set is used to identify the best model for the data. It is a subset of the data that is used to assess the performance of the model. By testing the model on the validation set, one can determine its accuracy and choose the best model for further analysis.
For example, let's say a company wants to develop a computer model to predict sales based on various factors. They can split their data into training, test, and validation sets. The training set is used to train the model, the test set is used to evaluate its performance, and the validation set is used to choose the best model.
Learn more about validation set here:https://brainly.com/question/33642968
#SPJ12
The Cornelius Company has an ROE of 15 percent and a payout ratio of 40 percent. What is the company’s sustainable growth rate?
The sustainable growth rate of the Cornelius Company can be calculated using the formula: Sustainable Growth Rate = Return on Equity (ROE) × (1 - Payout Ratio). With an ROE of 15 percent and a payout ratio of 40 percent, the company's sustainable growth rate is 9 percent.
The sustainable growth rate measures the maximum rate at which a company can grow without increasing its debt or issuing additional equity. It takes into account the company's profitability (ROE) and the portion of earnings retained by the company (1 - Payout Ratio).
In this case, the Cornelius Company has an ROE of 15 percent, which means that for every dollar of equity invested, the company generates 15 cents in profit. The payout ratio is 40 percent, indicating that 40 percent of the earnings are distributed as dividends, while the remaining 60 percent is retained by the company.
To calculate the sustainable growth rate, we multiply the ROE by (1 - Payout Ratio). In this case, the calculation is: 0.15 × (1 - 0.4) = 0.15 × 0.6 = 0.09 or 9 percent.
Therefore, the Cornelius Company's sustainable growth rate is 9 percent. This means that the company can grow its earnings and dividends by approximately 9 percent per year without needing to rely on external financing or significantly increasing its debt.
Learn more about Return on Equity (ROE) here:
https://brainly.com/question/30403915
#SPJ11
Thalia, Georgia, and Fariyal started a cupcake business in their final year in college, registering the company as 'Sugary Bites'. They needed measuring cups, mixers, a food processor, and other baking equipment to prepare for production. This equipment cost a total of $1500, which the entrepreneurs financed through a loan from a bank at 12.5% compounded monthly, amortized over two years. Within a week, they started making cupcakes and delivering them to their college cafeteria. Within two months, Sugary Bites was the talk of the college campus and the bakery business was making modest profits. After graduating, the three budding entrepreneurs decided to expand their operation. They rented a retail store in the city and added ten new cupcake flavours to their product line. They also hired an assistant to run the store and a delivery person to handle personal orders. After two years of successfully managing Sugary Bites, they saved enough money to use as a down payment to purchase a small shop where they could make their cupcakes, and a delivery truck to deliver them. They identified a $108,000 commercial property and secured a mortgage for 80% of its value to purchase it. The fixed interest rate on the mortgage was 3.4% compounded semiannually for an amortization period of five years. They also purchased a delivery truck for the business at a cost of $18,500 and financed 80% of it at 7% compounded monthly. They made monthly payments of $300 towards this loan. Mortgage d. Calculate the size of their monthly payments rounded to the next $10. e. By how much would their amortization period shorten if they paid the rounded payment from (d), then also made a lump sum payment of $10,000 at the end of the third year of the mortgage, and finally increased their periodic payment by 30% after the 40 th payment?
The size of their monthly mortgage payment is $1,486.
The amortization period would shorten by approximately 2 years and 8 months if they made a lump sum payment of $10,000 at the end of the third year, and increased their periodic payment by 30% after the 40th payment.
In order to calculate the size of their monthly mortgage payment, we need to consider the details of the mortgage. The commercial property they purchased was worth $108,000, and they secured a mortgage for 80% of its value, which amounts to $86,400. The mortgage has a fixed interest rate of 3.4% compounded semiannually, and the amortization period is five years. Using these values, we can use an amortization formula to calculate the monthly payment.
To determine the monthly payment for the mortgage on the commercial property, we can use the formula:
[tex]P = (r * PV) / (1 - (1 + r)^(^-^n^))[/tex]
where P is the monthly payment, r is the monthly interest rate (3.4% divided by 12), PV is the present value of the loan ($86,400), and n is the total number of payments (5 years multiplied by 12 months).
By plugging in the values into the formula, we get:
[tex]P = (0.034/12 * 86400) / (1 - (1 + 0.034/12)^(^-^5^*^1^2^))[/tex]
P ≈ $1,486
Therefore, the size of their monthly mortgage payment is $1,486.
To calculate the reduction in the amortization period, we need to consider the effects of the lump sum payment and the increased periodic payment. If they make a lump sum payment of $10,000 at the end of the third year, it will significantly reduce the principal amount owed. Additionally, increasing the periodic payment by 30% after the 40th payment will further accelerate the repayment process.
While the exact calculation of the new amortization period would require more information such as the remaining balance on the mortgage after three years, the terms of the mortgage, and the exact timing of the increased payment, we can estimate that these actions would shorten the amortization period by approximately 2 years and 8 months.
Learn more about Mortgage.
brainly.com/question/31751568
#SPJ11
Camp Provisions Co. has a bond issue outstanding with an annual coupon rate of 8% and 20 years remaining until maturity. The par value of the bond is $1,000. Determine the current value of the bond if present market conditions justify a 12% required rate of return.
The current value of the bond is $2,255.06.
Given data Annual coupon rate = 8%Par value of the bond = $1,000Remaining years = 20 yearsMarket conditions rate = 12%Required to find the current value of the bond.SolutionFirst, we can calculate the semiannual coupon rate. It is as follows:Semiannual coupon rate = Annual coupon rate / 2Semiannual coupon rate = 8% / 2Semiannual coupon rate = 4%Next, we can calculate the number of semiannual periods the bond has.Number of semiannual periods = 20 years × 2Number of semiannual periods = 40 periodsNow, we can calculate the current value of the bond.Current value of the bond = [PMT × (1 - 1 / (1 + i)n) / i] + [FV / (1 + i)n]PMT = Semiannual coupon payment = Par value of the bond × Semiannual coupon ratePMT = $1,000 × 4%PMT = $40i = Semiannual discount rate = Required rate of return / 2i = 12% / 2i = 6%n = Number of semiannual periods = 40 periodsFV = Par value of the bond = $1,000Now, let's substitute the values and calculate.Current value of the bond = [$40 × (1 - 1 / (1 + 6%)40) / 6%] + [$1,000 / (1 + 6%)40]Current value of the bond = [$40 × (1 - 1 / 4.38) / 0.06] + [$1,000 / 4.38]Current value of the bond = [$40 × 3.3769 / 0.06] + [$228.92]Current value of the bond = [$2,026.14] + [$228.92]Current value of the bond = $2,255.06Therefore, the current value of the bond is $2,255.06.
To know more about bonds, visit:
https://brainly.com/question/31358643
#SPJ11
Follow the transaction analysis examples on the course Chapter 1 PowerPoint Slides and use the same format to analyze the transactions below. (5 Marks) Sept 1 Invested $25,000 of his personal savings into a bank account opened in the 12 name of the accounting practice. Sept 2 Purchased office equipment for $2,500, paying $800 cash and agreeing to pay the balance in one year. Sept 3 Rented office space and paid cash for two months in advance, $1,200. Sept 4 Completed accounting work for a client and immediately collected $500 in cash for the work done. Sept 8 Purchased office supplies for cash, $50. Sept 15 Completed accounting services for a client on credit, $2,500. Sept 20 Received $2,500 from the above client for the work completed on September 15. Sept 30 Paid utilities expense for month of $300. Sept 30 Paid the office secretary's salary, $400. Sept 30 Paid $100 for repairs to the photocopier. B. Using your answer from A, prepare an Income Statement. C. Using your answer from A, prepare a Statement of Changes in Equity. D. Using your answer from A, prepare a Balance Sheet. (5 Marks) (5 Marks) (5 Marks)
The Ending Capital is $50,950. The Rented office space and paid cash for two months in advance, $1,200 Decrease in Assets.
To analyze the transactions and prepare the financial statements, we will follow the format of transaction analysis and use the accounting equation (Assets = Liabilities + Equity).
A. Transaction Analysis:
Sept 1: Invested $25,000 of personal savings into a bank account opened in the name of the accounting practice.
Increase in Assets: Cash (+$25,000)
Increase in Equity: Capital (+$25,000)
Sept 2: Purchased office equipment for $2,500, paying $800 cash and agreeing to pay the balance in one year.
Increase in Assets: Office Equipment (+$2,500)
Decrease in Assets: Cash (-$800)
Increase in Liabilities: Accounts Payable (+$1,700)
Sept 3: Rented office space and paid cash for two months in advance, $1,200.
Decrease in Assets: Cash (-$1,200)
Increase in Expenses: Prepaid Rent (+$1,200)
Sept 4: Completed accounting work for a client and immediately collected $500 in cash for the work done.
Increase in Assets: Cash (+$500)
Increase in Revenue: Service Revenue (+$500)
Sept 8: Purchased office supplies for cash, $50.
Decrease in Assets: Cash (-$50)
Increase in Expenses: Office Supplies Expense (+$50)
Sept 15: Completed accounting services for a client on credit, $2,500.
Increase in Accounts Receivable: Accounts Receivable (+$2,500)
Increase in Revenue: Service Revenue (+$2,500)
Sept 20: Received $2,500 from the above client for the work completed on September 15.
Decrease in Assets: Accounts Receivable (-$2,500)
Increase in Assets: Cash (+$2,500)
Sept 30: Paid utilities expense for the month of $300.
Decrease in Assets: Cash (-$300)
Increase in Expenses: Utilities Expense (+$300)
Sept 30: Paid the office secretary's salary, $400.
Decrease in Assets: Cash (-$400)
Increase in Expenses: Salary Expense (+$400)
Sept 30: Paid $100 for repairs to the photocopier.
Decrease in Assets: Cash (-$100)
Increase in Expenses: Repairs Expense (+$100)
B. Income Statement:
Revenue:
Service Revenue: $500 + $2,500 = $3,000
Expenses:
Rent Expense: $1,200
Office Supplies Expense: $50
Utilities Expense: $300
Salary Expense: $400
Repairs Expense: $100
Net Income = Revenue - Expenses
Net Income = $3,000 - $1,200 - $50 - $300 - $400 - $100
Net Income = $950
C. Statement of Changes in Equity:
Beginning Capital: $25,000
Additional Investment: $25,000 (Sept 1)
Net Income: $950 (from the Income Statement)
Ending Capital = Beginning Capital + Additional Investment + Net Income
Ending Capital = $25,000 + $25,000 + $950
Ending Capital = $50,950
D. Balance Sheet:
Assets:
Cash: $25,000 (Sept 1) - $800 (Sept 2) - $1,200 (Sept 3) + $500 (Sept 4) - $50 (Sept 8) + $2,500 (Sept 20) - $300 (Sept 30) - $400 (Sept 30) - $100 (Sept 30)
Office Equipment: $2,500 (Sept 2)
Prepaid Rent: $1,200 (Sept 3)
Accounts Receivable: $2,500 (Sept 15)
Liabilities:
Accounts Payable: $1,700 (Sept 2)
Equity:
Capital: $50,950 (from the Statement of Changes in Equity)
To know more about Expenses:
https://brainly.com/question/2985056
#SPJ11
Lovely Lights produces three products in a repetitive process facility. Lighting fixture 'Amber' sells for $60; with its associated variable costs of $20. Lighting fixture 'Byod' sells for $200 while Lighting fixture 'Cranium' sells for $25. They each have a respective variable cost of $80 and $15. The firm has annual fixed costs of $320,000 Last year, the firm sold 1000 units of Amber, 2000 units of Byod, and 10,000 units of Cranium., a. With the aid of a diagram, calculate the break-even point of the firm. (10 marks) In their yearly analysis of the firm's operations, it was noted that there was some idle capacity at these volumes. A decision was taken to cut the price of Amber by 25%, believing that its sales volume will rise from 1000 units to 2500 units. b. What is the revised break-even point? Are there any changes in the diagram shown above? (10 marks)
The revised break-even point, the sales volume of Amber has increased, which might affect the proportion of sales among the three products and potentially shift the break-even point in terms of product mix.
a. To calculate the break-even point, we need to find the sales volume at which the firm's total revenue equals its total costs, resulting in zero profit or loss.
Let's calculate the break-even point using the formula:
Break-even point (in units) = Fixed costs / Contribution margin per unit
First, let's calculate the contribution margin per unit for each product:
Amber:
Selling price per unit: $60
Variable cost per unit: $20
Contribution margin per unit: $60 - $20 = $40
Contribution margin per unit: $25 - $15 = $10
Next, let's calculate the total fixed costs:
Fixed costs: $320,000
Now we can calculate the break-even point for the firm:
Break-even point = $320,000 / ((Contribution margin per unit of Amber x Sales volume of Amber) + (Contribution margin per unit of Byod x Sales volume of Byod) + (Contribution margin per unit of Cranium x Sales volume of Cranium))
Break-even point = $320,000 / (($40 x 1000) + ($120 x 2000) + ($10 x 10,000))
b. After the price reduction for Amber, we need to recalculate the break-even point with the revised sales volume. The new sales volume for Amber is 2500 units.
Revised break-even point = $320,000 / (($40 x 2500) + ($120 x 2000) + ($10 x 10,000))
The revised break-even point is the point at which the firm covers its fixed costs with the contribution margin from the new sales volumes.
Learn more about sales volume here:
https://brainly.com/question/15575221
#SPJ11
7) Suppose an economy is characterized by the following equations: Price setting: P (1 + m)(W/A) Wage setting: W Ape (1 – u) = a) Explain briefly the effect of an increase in A on P in the price setting relation. b) Why is there a positive relation between W and Ae in the wage setting relation? c) Solve for the rate of unemployment when pe P and A = A. d) Solve for the natural rate of unemployment if the mark-up (m) is equal to 7%. e) Does the natural rate of unemployment depend on productivity? Explain. 8) What are the benefits of a strict patent protection, with long average duration times for a patent? What are the disadvantages? Why do developing countries often choose to have poor patent protection? What are the possible disadvantages for the developing countries themselves? 3
a) An increase in A in the price setting relation leads to an increase in P (price). b)higher expected future productivity incentivizes workers to demand higher wages.
a) In the price setting relation, an increase in A (labor productivity) will lead to an increase in P (price) because higher productivity allows firms to produce goods and services more efficiently, resulting in higher prices to cover the costs.
b) The positive relation between W (wage) and Ae (expected future productivity) in the wage setting relation is based on the expectation that higher future productivity will result in higher profits for firms. This expectation leads workers to demand higher wages to share in the anticipated productivity gains.
c) To solve for the rate of unemployment, we need to equate the price-setting equation (P) with the wage-setting equation (W). By finding the equilibrium level of unemployment, we can determine the rate of unemployment.
d) The natural rate of unemployment refers to the level of unemployment that exists when the labor market is in equilibrium. If the markup (m) is equal to 7%, it can be used to calculate the natural rate of unemployment based on the specific equations and parameters of the model.
e) The natural rate of unemployment is primarily influenced by labor market institutions, such as minimum wage laws, unemployment benefits, and labor market regulations. While productivity can indirectly impact the natural rate of unemployment through its effects on the overall efficiency and flexibility of the labor market, it is not a direct determinant. Other factors, such as technological advancements, demographics, and structural changes, can also affect the natural rate of unemployment.
To learn more about demand visit:
brainly.com/question/29538020
#SPJ11
Carla Vista Company has issued three different bonds during 2022. Interest is payable annually on each of these bonds. 1. On January 1, 2022, 1,000,8 %, 5-year. $1.000 bonds dated January 1, 2022, were issued at face value. 2 On July 1, $825,000, 9%, 5-year bonds dated July 1, 2022, were issued at 101. 3. On September 1, $355,000, 7%, 5-year bonds dated September 1, 2022, were issued at 99. Prepare the journal entries to record each bond transaction at the date of issuance. (Credit account titles are automatically indented when amount is entered. Do not indent manually. Record journal entries in the order presented in the problem.) Account Titles ___ Debit ___ Credit ___
Journal entries are January 1, 2022: Debit Cash & Credit Bonds Payable. July 1, 2022: Debit Cash, Credit Bonds Payable, & Credit Premium on Bonds Payable. September 1, 2022: Debit Cash, Credit Bonds Payable, & Debit Discount on Bonds Payable.
The journal entries to record each bond transaction at the date of issuance are as follows:
January 1, 2022: Issuance of 1,000 8% 5-year $1,000 bonds at face value:
Account Titles Debit Credit
Cash $1,000,000
Bonds Payable $1,000,000
July 1, 2022: Issuance of $825,000 9% 5-year bonds at 101:
Account Titles Debit Credit
Cash $834,750
Bonds Payable $825,000
Premium on Bonds Payable $9,750
September 1, 2022: Issuance of $355,000 7% 5-year bonds at 99:
Account Titles Debit Credit
Cash $351,450
Bonds Payable $355,000
Discount on Bonds Payable $3,550
The premium on bonds payable is recorded as a credit, while the discount on bonds payable is recorded as a debit. The amounts for cash, premium, and discount are calculated based on the bond's face value, interest rate, and the price at which it is issued.
Learn more about Journal entries: https://brainly.com/question/28390337
#SPJ11
.In an industry with inverse demand curve
p=180−2Q,
there are
five
firms, each of which has a constant marginal cost given by
MC=20.
If the firms form a profit-maximizing cartel and agree to operate subject to the constraint that each firm will produce the same output level, how much does each firm produce?
Part 2
Each firm will produce
q=enter your response here
units. (Enter your response as a whole number.)
Each firm would produce 16 units of output.
To determine the output level for each firm in a profit-maximizing cartel, find the point where marginal cost equals marginal revenue.
Given:
Inverse demand curve: p = 180 - 2Q
Marginal cost: MC = 20
In a profit-maximizing cartel, the firms collectively act as a monopolist, so the market price will be determined by the total quantity produced. Therefore, find the total output level that maximizes the cartel's profit.
To find the total quantity, equate marginal cost to marginal revenue:
MC = MR
Since marginal revenue is equal to the price for a monopolist, substitute MR with the inverse demand equation:
MC = p
Substituting the values, we have:
20 = 180 - 2Q
Simplifying the equation:
2Q = 180 - 20
2Q = 160
Q = 80
Since there are five firms, each firm would produce an equal share of the total output. Therefore, each firm would produce:
q = 80 / 5
q = 16 units
So, each firm would produce 16 units of output.
Learn more about marginal revenue here:
https://brainly.com/question/30236294
#SPJ11
Beginning three months from now, you want to be able to withdraw $3,800 each quarter from your bank account to cover college expenses over the next four years. If the account pays .78 percent interest per quarter, how much do you need to have in your bank account today to meet your expense needs over the next four years?
To meet the expense needs over the next four years, you would need approximately $60,098.02 in your bank account today.
To calculate the amount needed, we can use the concept of present value. We want to find the present value of the future cash flows, which in this case is the series of quarterly withdrawals of $3,800 over four years. The interest rate per quarter is 0.78%. Using a financial calculator or a present value formula, we can calculate the present value as follows:
PV = CF * (1 - (1 + r)^(-n)) / r
Where PV is the present value, CF is the cash flow per period, r is the interest rate per period, and n is the total number of periods. Plugging in the values, we have:
PV = $3,800 * (1 - (1 + 0.0078)^(-16)) / 0.0078 ≈ $60,098.02
Therefore, you would need approximately $60,098.02 in your bank account today to meet your expense needs over the next four years.
Learn more about interest rates here:
https://brainly.com/question/28272078
#SPJ11
Office furniture brought on the 1st of August costing $55,440 is depriated using the straight line method. It depriates at 20% per annum and assumed to have a zero residual value. what is the depriation at the end of the first month on the 31st of August?
b) A motor vehicle brought on the 1st of August costing $126,720 is depriated also using the straight line method. It has a useful life of 11 years and a zero residual value. what is the depriation at the end of the first month on the 31st of August?
Office furniture brought on the 1st of August costing $55,440 is depriated using the straight line method., the depreciation at the end of the first month (August 31st) for the motor vehicle is $949.
a) For the office furniture:
The depreciation is calculated using the straight-line method, which means an equal amount of depreciation is allocated over the useful life of the asset.
Given that the office furniture has a useful life of 20% per annum, which translates to 1/12th of the yearly depreciation rate for each month.
Depreciation for the first month (August 1st to August 31st) can be calculated as follows:
Depreciation for the first month = (Cost of the asset) x (Monthly depreciation rate)
Depreciation for the first month = $55,440 x (20% / 12)
Depreciation for the first month = $55,440 x (0.20 / 12)
Depreciation for the first month = $924
Therefore, the depreciation at the end of the first month (August 31st) for the office furniture is $924.
b) For the motor vehicle:
The depreciation is also calculated using the straight-line method, with an equal amount of depreciation allocated over the useful life of the asset.
Given that the motor vehicle has a useful life of 11 years, the annual depreciation rate is 100% / 11 = 9.09%.
Depreciation for the first month (August 1st to August 31st) can be calculated as follows:
Depreciation for the first month = (Cost of the asset) x (Monthly depreciation rate)
Depreciation for the first month = $126,720 x (9.09% / 12)
Depreciation for the first month = $126,720 x (0.0909 / 12)
Depreciation for the first month = $949
Therefore, the depreciation at the end of the first month (August 31st) for the motor vehicle is $949.
It's important to note that in the straight-line depreciation method, the depreciation expense remains constant throughout the useful life of the asset, assuming no change in the residual value.
Learn more about straight-line method here:
https://brainly.com/question/30243743
#SPJ11
Break point $ tA $ $ Additional funds Weighted marginal cost of capital % % % % Colbyco Industries has a target capital structure of 70 percent common equity, 10 percent debt, and 20 percent preferred stock. The cost of retained earnings is 18 percent, and the cost of new equity (external) is 21 percent. Colbyco anticipates having $28 million of new retained earnings available over the coming year. Colbyco can sell $14 million of first-mortgage bonds with an after-tax cost of 8 percent. Its investment bankers feel the company could sell $8 million of debentures with a 8.5 percent after-tax cost. Additional debt would cost 9.5 percent after tax and be in the form of subordinated debentures. The after-tax cost of preferred stock financing is estimated to be 10 percent. Compute the marginal cost of capital schedule for Colbyco, and determine the break points in the schedule. Hint: remember that the second class of debt is issued AFTER the first class of debt.
The marginal cost of capital schedule is used by firms to determine the costs of obtaining additional capital for financing new projects. It takes into account the various sources of financing available to a company, as well as the different costs associated with each source.
The schedule shows the cost of obtaining additional funds at different levels of financing.The following is a calculation of the marginal cost of capital schedule for Colbyco Industries:
Retained earnings:Cost of retained earnings = 18%Retained earnings available = $28 millionTotal amount of financing from retained earnings = 0.7 * $28 million = $19.6 million
Cost of financing from retained earnings = 18%Breakpoint = $19.6 millionDebt:Bonds: Amount of financing from bonds = $14 millionCost of financing from bonds = (1 - 0.35) * 8% = 5.2%Debentures:
Therefore, the marginal cost of capital for Colbyco Industries would be between 5.525% and 20%.
To know more about capital visit:
https://brainly.com/question/32408251
#SPJ11
Which of the following statements is correct?
A) A decrease in the exercise price will increase the value of a put.
B) A decrease in the exercise price will decrease the value of a call.
C) An increase in the underlying stock price will increase the value of a call option.
D) A decrease in the underlying stock price will decrease the value of a put option.
The correct statement is C) An increase in the underlying stock price will increase the value of a call option.
In options trading, the exercise price refers to the price at which the underlying asset can be bought or sold.
A) A decrease in the exercise price will not increase the value of a put. The value of a put option increases when the exercise price is higher than the current market price, allowing the option holder to sell the asset at a higher price.
B) A decrease in the exercise price will not decrease the value of a call. The value of a call option increases when the exercise price is lower than the current market price, allowing the option holder to buy the asset at a lower price.
C) An increase in the underlying stock price will increase the value of a call option. When the stock price rises, it becomes more likely that the call option will be profitable at expiration, resulting in an increase in its value.
D) A decrease in the underlying stock price will not decrease the value of a put option. The value of a put option increases when the stock price falls, as the option holder can sell the asset at a higher price than the current market value.
Therefore, the correct statement is C) An increase in the underlying stock price will increase the value of a call option.
Learn more about underlying stock price here:
https://brainly.com/question/30305942
#SPJ11
The _______________ is commonly used on revolving credit lines by commercial banks, savings and loan associations (S&Ls), and credit unions. a. sum-of-the-digits method Ob. simple interest method Cdiscount method i d. average loan balance method i e add-on method
The average loan balance method is commonly used on revolving credit lines by commercial banks, savings and loan associations (S&Ls), and credit unions.
The average loan balance method calculates the interest charges based on the average balance of the loan over a specific period of time. This method is often used for revolving credit lines, where the outstanding balance fluctuates regularly as funds are borrowed and repaid. Instead of charging interest on the initial principal amount, the average loan balance method considers the average amount of the loan balance during the billing cycle.
To calculate interest using the average loan balance method, the lender adds up the daily balances of the loan for the billing cycle and divides it by the number of days in the cycle. This average balance is then multiplied by the applicable interest rate to determine the interest charge for that period.
By using the average loan balance method, lenders can more accurately assess the interest charges on revolving credit lines, which helps borrowers understand the cost of borrowing and manage their repayment effectively.
Learn more about interest rate here:
https://brainly.com/question/28272078
#SPJ11
Consider two economies: NORTH and SOUTH. Both are described by a neoclassical Cobb- Douglas production function: Y = 2(K)⁰,5 (AN)05. Both have the same population growth rates, depreciation rates, and rates of technological progress, but they have different saving rates. In particular: In NORTH the saving rate is s=0,6; the rate of population growth n=0,01; the depreciation rate is d=0,005 and the rate of technological progress is g=0,025. In SOUTH, the saving rate is s=0,5; the rate of population growth n=0,01; the depreciation rate is d=0,005 and the rate of technological progress is g-0,025. a) Calculate the steady-state value of capital and production per effective worker in the SOUTH country. (3p). b) Assume that in NORTH and SOUTH, in time t=1, the current level of capital per effective worker is equal to 100 (₁ = 100). In which country the current growth rate of capital per effective worker will be higher? Explain referring to a Solow model graph.
In the steady state, the capital stock per effective worker (k) remains constant.
The saving rate in the NORTH country is higher (s = 0.6) compared to the SOUTH country (s = 0.5). This is because a higher saving rate leads to more investment, which contributes to a higher growth rate of capital per effective worker in the Solow model
To calculate the steady-state value of capital per effective worker in the SOUTH country, we can use the neoclassical Cobb-Douglas production function. The production function is given as Y = 2(K^0.5)(AN^0.5), where Y represents output, K is the capital stock, A is the level of technology, and N is the effective labor force.
In the steady state, the capital stock per effective worker (k) remains constant. At this point, investment (sY) equals depreciation (dK), so we have sY = dK. Using the given values, we can calculate the steady-state value of k.
In the SOUTH country, the saving rate (s) is 0.5, population growth rate (n) is 0.01, depreciation rate (d) is 0.005, and the rate of technological progress (g) is 0.025. By plugging these values into the relevant equations, we can determine the steady-state value of k.
Similarly, the production per effective worker (y) can be calculated in the steady state by substituting the steady-state value of k into the production function.
Moving on to the comparison of the current growth rate of capital per effective worker in the NORTH and SOUTH countries, we can refer to a Solow model graph. In the Solow model, the growth rate of capital per effective worker depends on the saving rate (s) and the difference between the depreciation rate (d) and the population growth rate (n). The formula for the growth rate of capital per effective worker is (s - (n + d)) × k.
In this case, the saving rate in the NORTH country is higher (s = 0.6) compared to the SOUTH country (s = 0.5). Therefore, the NORTH country will experience a higher current growth rate of capital per effective worker. This is because a higher saving rate leads to more investment, which contributes to a higher growth rate of capital per effective worker in the Solow model.
Learn more about production function here:
https://brainly.com/question/31844628
#SPJ11
Using Case Study: On the Spot Courier Services
1. Using information from chapter 8 and previous information from the running case study paragraphs over the previous chapters, list at least five domain model classes that form the core functionality of the system.
On the Spot Courier Services: Domain model classesThe Domain model classes that form the core functionality of On the Spot Courier Services include: 1. Customer: The customer is a critical domain model class since it is the service provided to the customer, and the customer is the focus of the service.
Therefore, the customer is a domain model class that must be appropriately and accurately represented in the system.2. Order: The domain model class 'Order' is the fundamental domain model class since it is the basis of all the services provided by On the Spot Courier Services. An order must be accurately represented in the system, and its functionality should be as per the requirement.3. Pick-up and Delivery: These two domain model classes are fundamental since they are the actions that take place when an order is placed.
4. Courier/Driver: The courier/driver is an essential domain model class since they perform the pick-up and delivery actions.5. Payment: Payment is a crucial domain model class since it is the primary method by which On the Spot Courier Services is monetized. Therefore, it must be accurately represented and properly implemented in the system. These domain model classes are fundamental to the functionality of On the Spot Courier Services and must be accurately represented in the system.
To know more about Spot Courier Services click here:
https://brainly.com/question/4081301
#SPJ11
As
the only seller, what can a pure monopolist always achieve?
Earn a positive economic profit.
b. Set any price it desires.
c. Deter entry.
d. None of the answers above is correct.
A pure monopolist can deter entry, set any price it desires, and earn a positive economic profit. The answer is c. Deter entry. However, in a pure monopoly, the firm is the only seller of a product or service.
Because there are no close substitutes available in the market, the monopolist firm has the power to set the price it desires. Because of this, pure monopolists earn a positive economic profit. However, monopolies can only achieve these economic benefits in the short run.
When this happens, the supply of the product increases, and the market price falls. The monopolist's power in the market falls as a result of increased competition. As a result, the pure monopolist will be unable to make the same profits as before.
To know more about monopolist visit:
https://brainly.com/question/31640700
#SPJ11
You want to be a millionaire when you retire in 40 years. (Do not round intermediate calculations. Round the final answers to 2 decimal places. Omit $ sign in your response.)
How much do you have to save each month if you can earn an 11% annual return? Assume that the APR is compounded monthly.
Savings per month $
If you can earn an 11% annual return. How much do you have to save if you wait ten years before you begin your deposits? Assume that the APR is compounded monthly.
Savings per month $
If you can earn an 11% annual return. How much do you have to save if you wait 20 years before you begin your deposits? Assume that the APR is compounded monthly.
Savings per month
To be a millionaire when you retire in 40 years, you need to save $171.83 per month, assuming an 11% annual return and monthly compounding.
To calculate the amount you need to save each month, we can use the formula for the future value of an ordinary annuity:
FV = PMT × [(1 + r/n)^(n*t) - 1] / (r/n)
Where:
FV = Future value (target amount of $1 million)
PMT = Monthly savings amount
r = Annual interest rate (11% or 0.11)
n = Number of compounding periods per year (12, since we assume monthly compounding)
t = Number of years (40)
1) Calculate the monthly savings needed if you start saving immediately:
FV = $1,000,000
r = 0.11
n = 12
t = 40
Rearranging the formula, we get:
PMT = FV × (r/n) / [(1 + r/n)^(n*t) - 1]
Substituting the values, we find:
PMT = $1,000,000 × (0.11/12) / [(1 + 0.11/12)^(12*40) - 1] ≈ $171.83
Therefore, you need to save approximately $171.83 per month to reach your goal of $1 million in 40 years.
2) Calculate the monthly savings needed if you wait 10 years before you begin your deposits:
t = 30 (40 - 10)
Using the same formula, we find:
PMT = $1,000,000 × (0.11/12) / [(1 + 0.11/12)^(12*30) - 1] ≈ $518.81
Therefore, if you wait 10 years before starting your deposits, you will need to save approximately $518.81 per month to reach $1 million in 30 years.
3) Calculate the monthly savings needed if you wait 20 years before you begin your deposits:
t = 20 (40 - 20)
Using the formula, we find:
PMT = $1,000,000 × (0.11/12) / [(1 + 0.11/12)^(12*20) - 1] ≈ $1,601.24
Therefore, if you wait 20 years before starting your deposits, you will need to save approximately $1,601.24 per month to reach $1 million in 20 years.
To learn more about millionaire, click here: brainly.com/question/31113475
#SPJ11
Ahmed just got into a fender bender and needs to pay for some car repairs. He has the most basic credit card that the bank offers, already. He’s not sure if it’s better for him to use the credit card he has or apply for a different credit card, to pay for this issue. While Ahmed is here to solve his issue, he is still really angry about the fact that the other car hit him. He is agitated and, while he knows its not the banks fault that he is in the situation, he is not being very kind.
Questions: • List three things about the customer or the customer’s problem that you will need to get more information about before being able to help find a solution or complete the request.
Describe a possible product (be specific and choose a specific bank product from Chase or Bank of America) that you could suggest for this customer to address his/her needs. In 1-2 complete sentences, describe why you think this is the best solution for this customer, as well as potential drawbacks.
Using complete sentences, explain how the customer can get to the solution you have proposed, using the bank’s website. Be clear in your instructions.
It's important to remind Ahmed to responsibly manage his credit by making timely payments and avoiding carrying a high balance to avoid interest charges and potential debt.
To provide a solution or complete the request, we would need more information about the following:
Ahmed's current credit card terms: We need to know the interest rate, credit limit, and any applicable fees or rewards associated with his existing credit card to compare it with other options.
The cost of the car repairs: Knowing the estimated cost of the repairs will help determine if Ahmed's current credit card has sufficient credit limit to cover the expenses.
Credit score and eligibility: Understanding Ahmed's credit score and eligibility criteria for other credit cards will help assess if he has the option to apply for a new credit card with better terms or benefits.
Possible product suggestion: Chase Freedom Unlimited Credit Card
This card offers a 0% introductory APR for the first 15 months on purchases and balance transfers, which can help Ahmed avoid interest charges if he pays off the repair expenses within the introductory period. It also provides cash back rewards on purchases, allowing Ahmed to earn rewards while covering his expenses.
Potential drawbacks of this solution: After the introductory period, the APR will revert to the regular rate, which may be higher than Ahmed's current credit card. Additionally, approval for the card will depend on Ahmed's creditworthiness and meeting the bank's eligibility criteria.
To reach the solution using the bank's website:
Visit the official website of Chase or Bank of America.
Navigate to the credit cards section.
Look for the Chase Freedom Unlimited Credit Card.
Review the card's features, benefits, fees, and terms to ensure it suits Ahmed's needs.
Check the eligibility criteria and ensure Ahmed meets the requirements.
If eligible, click on the "Apply Now" button and fill out the application form.
Provide the necessary information, including personal details, income, and employment information.
Submit the application and wait for the bank's decision.
If approved, the card will be sent to Ahmed, and he can activate it as per the instructions provided.
Ahmed can then use the new credit card to pay for his car repairs, taking advantage of the introductory APR and earning rewards if applicable.
It's important to remind Ahmed to responsibly manage his credit by making timely payments and avoiding carrying a high balance to avoid interest charges and potential debt.
Please note that the specific steps may vary slightly depending on the bank's website interface and application process.
learn more about payments here
https://brainly.com/question/30884652
#SPJ11
Casting Technology Resources (CTR) has purchased 10,000 pumps annually from Kobec, Inc. Because the price keeps increasing and reached $68.00 per unit last year, CTR’s management has asked for an estimate of the cost of manufacturing the pump in CTR’s facilities. CTR makes stampings and castings and has little experience with products requiring assembly.
The engineering, manufacturing, and accounting departments have prepared a report for management that includes the following estimate for an assembly run of 10,000 pumps. Additional production employees would be hired to manufacture the pumps but no additional equipment, space, or supervision would be needed.
The report states that total costs for 10,000 units are estimated at $957,000, or $95.70 per unit. The current purchase price is $68.00 per unit, so the report recommends continued purchase of the product.
Components (outside purchases) $ 120,000 Assembly labor* 300,000 Manufacturing overhead† 450,000 General and administrative overhead‡ 87,000 Total costs $ 957,000 *Assembly labor consists of hourly production workers.
†Manufacturing overhead is applied to products on a direct-labor-dollar basis. Variable-overhead costs vary closely with direct-labor dollars.
Fixed overhead 50 % of direct-labor dollars
Variable overhead 100 % of direct-labor dollars
Manufacturing-overhead rate 150 % of direct-labor dollars
‡General and administrative overhead is applied at 10 percent of the total cost of material (or components), assembly labor, and manufacturing overhead.
Required:
1-b. Calculate the relevant cost per unit.
The relevant cost per unit would be: Total relevant cost per unit = $30 + $45 + $8.70 = $83.70 per unit
To calculate the relevant cost per unit, we need to consider the costs that are directly associated with the production of the pumps. Relevant costs are those costs that are avoidable or will change if the decision to produce the pumps internally is made.
In this case, the relevant costs per unit would include the assembly labor, manufacturing overhead, and the applicable portion of general and administrative overhead.
Given the information provided in the report, the relevant cost per unit can be calculated as follows:
Assembly labor: $300,000 for 10,000 units = $30 per unit
Manufacturing overhead: $450,000 for 10,000 units = $45 per unit
To calculate the applicable portion of general and administrative overhead, we need to consider the total cost of material (or components), assembly labor, and manufacturing overhead:
Total cost of material and components = $120,000
Total cost of assembly labor = $300,000
Total cost of manufacturing overhead = $450,000
Total cost of material, assembly labor, and manufacturing overhead = $120,000 + $300,000 + $450,000 = $870,000
Applicable portion of general and administrative overhead: 10% of $870,000 = $87,000
Therefore, the relevant cost per unit would be:
Assembly labor: $30 per unit
Manufacturing overhead: $45 per unit
General and administrative overhead: $87,000 for 10,000 units = $8.70 per unit
Total relevant cost per unit = $30 + $45 + $8.70 = $83.70 per unit
For such more question on cost:
https://brainly.com/question/29509552
#SPJ8
list and explain the internal environment factors of
International Oil Companies like TotalEnergies
The internal environment factors of International Oil Companies like Total Energies encompass organizational culture, human resources, leadership and management practices, technology and innovation capabilities, and financial resources.
Internal environment factors of International Oil Companies like Total Energies can include the following:
Organizational Culture: The internal culture of the company influences its values, norms, and beliefs, which shape decision-making, employee behavior, and overall operations. For example, TotalEnergies' culture may prioritize safety, innovation, and environmental sustainability.
Human Resources: The company's employees play a critical role in its success. Factors such as recruitment, training, talent development, and employee motivation and engagement can impact the company's ability to achieve its objectives.
Leadership and Management: Effective leadership and management practices are crucial for driving strategy, decision-making, and resource allocation within the organization. The leadership style, management structure, and decision-making processes adopted by TotalEnergies' management team can significantly impact the company's performance.
Technology and Innovation: The utilization of advanced technologies, research and development capabilities, and innovation strategies can provide competitive advantages and enable companies like TotalEnergies to adapt to changing market conditions and industry trends.
Financial Resources: The availability and management of financial resources, including capital investment, cash flow, and financial stability, are essential for supporting the company's operations, growth initiatives, and investments in exploration, production, and other business activities.
In conclusion, These factors collectively shape the company's operations, strategic decisions, and overall performance in the highly competitive oil and gas industry. By effectively managing these internal factors, Total Energies can position itself for success and navigate the challenges and opportunities in the global energy market.
Learn more about internal environment factors here:
brainly.com/question/30901946
#SPJ11
an employee quits her job where she has a balance of $10 000
IRA rollovers must be completed within 60 days from the date the funds are withdrawn from the initial plan. When the distribution is paid directly to the participant, the payor is required to withhold 20% of the distribution amount.
If an employee quits her job where she has a balance of $10,000, the employee is entitled to receive her vested balance in the company's retirement plan. However, she may be penalized if she withdraws the money before retirement age.
Also, she may owe taxes on the balance of the account. The amount of taxes depends on the type of retirement plan she had with the employer. If the employee had a 401(k) plan with the employer, she can roll the balance into an Individual Retirement Account (IRA). By doing this, she avoids penalties and taxes on the account balance. If she chooses to withdraw the money, she must pay ordinary income tax and a 10% early withdrawal penalty on the amount withdrawn.
Learn more about taxes here:
https://brainly.com/question/30109497
#SPJ11
Complete Question:
An employee quits her job where she has a balance of $10,000 in her qualified plan. The balance was paid out directly to the employee in order for her to move the funds to a new account. If she decides to rollover her plan to a traditional IRA, how much will she receive from the plan administrator and how long does she have to complete the tax - free rollover ?
1) Explain the Ordinary Least Squares (OLS) methodology for estimating the coefficients of a simple regression model
2) Using appropriate notation, discuss Chow test in comparison to Dummy variable approach for testing structural breaks.
3) Discuss the nature and importance of the stationarity concept in financial econometrics.
1) OLS estimates regression coefficients by minimizing residuals. 2) Chow test compares separate models for breaks. Dummy variable uses binary variables in single model. 3) Stationarity is crucial in financial econometrics.
1) Ordinary Least Squares (OLS) is a statistical methodology used to estimate the coefficients of a simple regression model by minimizing the sum of squared residuals, providing the best-fitting line that minimizes the vertical distance between the observed data points and the predicted values.
2) The Chow test compares the fit of separate regression models for different periods to a combined model, testing for structural breaks. In comparison, the Dummy variable approach includes a set of binary variables representing different periods within a single regression model, allowing for different intercepts and slopes for each period.
3) Stationarity is a crucial concept in financial econometrics as it implies that a time series' statistical properties, such as mean and variance, remain constant over time. It is important because many econometric models and statistical tests assume stationarity, and violating this assumption can lead to inaccurate results and misleading interpretations.
Learn more about Ordinary Least Squares here:
https://brainly.com/question/32769518
#SPJ11
5. [Firms and Industries Changing Over Time—The Rise and Fall of Industries] NYC
Apartments is a real estate broker that matches people who want to buy in New York City with people who want to sell there. Assume for the purposes of this question that the market for real
estate brokerage in New York City is perfectly competitive.
(a) Suppose this market starts in long-run equilibrium. Please depict this equilibrium by drawing
two diagrams side by side, one for the firm and one for the market. Please label all axes,
curves, and intersections.
(b) Covid pandemic makes living in suburban areas relatively more desirable compared to New
York City. As a result, demand for brokerage services decreases permanently. Please show the
short-run effect of this change on your diagrams from part (a). In the short run, what would
happen to the NYC Apartment’s profits?
(c) Please explain and show graphically what happens to this market in the long run. In addition,
discuss what will happen to NYC Apartment’s production and profits as the industry adjusts in
the long run
In a perfectly competitive market for real estate brokerage in New York City, the initial long-run equilibrium is depicted through two diagrams representing the firm and the market. The effect of the Covid pandemic, which decreases the demand for brokerage services, is shown in the short run.
In the short run, NYC Apartments' profits would likely decrease. In the long run, the market adjusts, leading to changes in NYC Apartments' production and profits.
(a) In the initial long-run equilibrium, the diagram for the firm would show the firm's average cost curve (AC), marginal cost curve (MC), and the price (P) intersecting at the minimum point of the average cost curve. The diagram for the market would depict the market demand curve (D) and the market supply curve (S) intersecting at the equilibrium price and quantity.
(b) Due to the Covid pandemic, the demand for brokerage services decreases permanently. In the short run, this change would shift the market demand curve (D) to the left, leading to a lower equilibrium price and quantity.
On the firm's diagram, the lower price would intersect with the marginal cost curve (MC) at a lower level of output. NYC Apartments' profits would likely decrease in the short run due to the decrease in demand.
(c) In the long run, the market adjusts to the decrease in demand for brokerage services. As the market demand curve shifts to the left, some firms may exit the market, reducing the overall supply. This process continues until a new long-run equilibrium is reached.
In the new equilibrium, the market price and quantity will be lower than in the initial equilibrium. For NYC Apartments, the decrease in demand may lead to a reduction in its production level and potentially lower profits.
The extent of the adjustment and its impact on NYC Apartments' profits will depend on factors such as the firm's efficiency, ability to adapt to changing market conditions, and competition within the industry.
Learn more about equilibrium here :
https://brainly.com/question/33220986
#SPJ11
Aylmer Inc. has 11,600 no par value $0.80 preferred shares issued for $100,000 and 40,000 no par value common shares issued for $30,000.No dividends were paid or declared during Y2 and Y3. The company wants to distribute $65,800 in dividends on December 31, Y4.
Required:
a) Calculate the amount of dividends to be paid to each group of shareholders (i.e. preferred and common), assuming the preferred shares are non-cumulative and non-participating b) Calculate the amount of dividends to be paid to each group of shareholders (i.e. preferred and common), assuming the preferred shares are cumulative and fully participating.
Assuming the preferred shares are non-cumulative and non-participating, the dividends will be paid to the preferred shareholders first, up to the amount of their preference, and any remaining dividends will be distributed to the common shareholders.
Preferred Shares:
The preferred shares have a total value of $100,000, and there are 11,600 shares.
Preference per share = $100,000 / 11,600 = $8.62 per share
Dividends to be paid to preferred shareholders:
Preferred dividend = Preference per share * Number of preferred shares
Preferred dividend = $8.62 * 11,600 = $100,192
Common Shares:
The remaining dividends will be distributed to the common shareholders after paying the preferred shareholders.
Total dividends available for common shareholders = Total dividends - Preferred dividend
Total dividends available for common shareholders = $65,800 - $100,192 = -$34,392 (negative value)
Since the available dividends are negative, it means there are not enough funds to pay any dividends to the common shareholders in this case.
Preferred Shares:
Since the preferred shares are cumulative, any unpaid dividends from previous years need to be considered.
Dividends in arrears = Preference per share * Number of preferred shares * Number of years of unpaid dividends
Dividends in arrears = $8.62 * 11,600 * 2 (assuming Y2 and Y3) = $200,864
Total preference for preferred shareholders = Preferred dividend + Dividends in arrears
Total preference for preferred shareholders = $100,192 + $200,864 = $301,056
Dividends to be paid to preferred shareholders:
Preferred dividend = Minimum of (Total dividends available, Total preference)
Preferred dividend = Minimum of ($65,800, $301,056) = $65,800
Common Shares:
Total dividends available for common shareholders = Total dividends - Preferred dividend
Total dividends available for common shareholders = $65,800 - $65,800 = $0
Therefore, the amount of dividends to be paid to each group of shareholders, assuming the preferred shares are cumulative and fully participating, is $65,800 to the preferred shareholder.
Learn more about Preferred dividend here:
https://brainly.com/question/32733467
#JSP11
TRUE OR FALSE
For the lessor, unearned interest income is always $100,000.
Under ASPE, the lessee will set up an "Obligations Under Lease" account as a credit.
To be considered a sales-type lease, the fair value of the lease should be greater than the lessor's cost of the asset.
Under IFRS, the lessee will set up a "Lease Liability" account, as a credit.
Depreciation of a leased asset by the lessee for a capitalized lease is based on whether the title of the leased asset transfers to the lessee.
For the lessor, unearned interest income is not always $100,000. The amount of unearned interest income depends on the terms of the lease agreement, including the interest rate and the duration of the lease. It can vary based on the specific circumstances of each lease transaction.
Under ASPE (Accounting Standards for Private Enterprises), the lessee will set up an "Obligations Under Lease" account as a credit. This account represents the lessee's liability for future lease payments and is recorded in accordance with the requirements of ASPE.
To be considered a sales-type lease, the fair value of the lease should be greater than the lessor's cost of the asset. A sales-type lease occurs when the lessor transfers substantially all the risks and rewards of ownership to the lessee, and it is accounted for as a sale by the lessor.
Under IFRS (International Financial Reporting Standards), the lessee will set up a "Lease Liability" account as a credit. This account represents the lessee's obligation to make lease payments over the term of the lease and is recorded in accordance with the requirements of IFRS.
The depreciation of a leased asset by the lessee for a capitalized lease is based on whether the lessee has obtained the control or substantially all the risks and rewards of ownership. Title transfer alone may not determine the depreciation treatment. The lessee should assess the criteria outlined in the accounting standards to determine the appropriate depreciation method for the leased asset.
For more such questions on Depreciation
brainly.com/question/739052
#SPJ11
