What earthquake produced no surface faulting, suggesting fault movement occurred below 20 km in depth

The type of plate boundary occurs where two plates move apart, resulting in upwelling and partial melting of hot material from the mantle is called divergent boundary.

A divergent boundary is a boundary that occurs when two tectonic plates shift away from one another. This occurs in the mid-oceanic ridge system. Divergent boundaries occur when two plates move away from each other, creating space and allowing molten material to rise from the mantle.

This phenomenon is known as upwelling. The hot material from the mantle can create a shield volcano, which occurs at a divergent boundary. The partial melting of hot material can produce new crust as it rises to the surface. The new crust is pushed away from the boundary by the upwelling, resulting in the creation of new crust.

To know more about divergent boundary refer here : brainly.com/question/16962517

#SPJ11

This statement "A well-sorted gravel is likely to have greater porosity than a silty sandstone (sandstone with some silt sized grains" is b. false

A well-sorted gravel is likely to have greater porosity than a silty sandstone. Porosity refers to the percentage of void space in a material, indicating its ability to hold fluids. Well-sorted gravel generally has larger and more uniform grain sizes, which leads to lower porosity compared to a silty sandstone that contains a mixture of sand and silt-sized grains.

A well-sorted gravel is not likely to have greater porosity than a silty sandstone. The presence of fine-grained particles, such as silt-sized grains in a sandstone, can contribute to higher porosity due to their smaller size and ability to fill the void spaces between larger grains. Therefore, a silty sandstone may exhibit greater porosity compared to a well-sorted gravel.

To know more about silty sandstone click here:

https://brainly.com/question/1563342

#SPJ11

Coastal flooding is the terms for Flooding in areas due to landward flows caused by unusually high tides, waves from high winds, storm surges, tsunamis, or by a combination of these causes.

Coastal flooding specifically refers to the inundation of land along coastal areas as a result of various water-related events. Unusually high tides, can cause coastal areas to flood, particularly when they coincide with other contributing factors like storm surges or high winds.

Strong winds associated with storms or intense weather systems can generate powerful waves that can cause coastal flooding. Tsunamis are large ocean waves generated by undersea earthquakes, volcanic eruptions, or submarine landslides and can result in significant coastal flooding, causing widespread destruction and devastation.

Know more about Coastal flooding here

https://brainly.com/question/29330472

#SPJ4

The best definition of a line segment is "A. The distance between two points."

A line segment is a fundamental concept in geometry and is defined as the portion of a line that connects two distinct points. It is important to note that a line segment has a definite length and is finite, unlike a line which extends indefinitely in both directions.

Option A, "The distance between two points," provides the most accurate and concise definition of a line segment. A line segment represents the shortest path between two points and is often represented by a line segment symbol (e.g., AB) or by labeling the two endpoints (e.g., segment AB).

Option B, "The straight path between two points," is a partial definition that describes a general characteristic of a line segment but does not explicitly mention its finite length.

Option C, "The point where two sides of a polygon meet," is incorrect as it describes the definition of a vertex, which refers to the point where two sides of a polygon intersect.

Option D, "The angle measure between two rays," is incorrect as it describes the definition of an angle, which is formed by two rays sharing a common endpoint.

In summary, the best definition of a line segment is that it represents the distance between two points, highlighting its finite length and connecting nature.

For more questions on line segment

https://brainly.com/question/280216

#SPJ8

The answer is G. Quartz

Quartz is the mineral corresponding to the given letter "G." Quartz is a common mineral found in the Earth's crust and belongs to the group of silicate minerals. It has a wide range of colors and can be transparent, translucent, or opaque. Quartz is composed of silicon and oxygen atoms arranged in a continuous framework of tetrahedra. Quartz is known for its hardness and durability, making it one of the most abundant minerals on Earth. It is resistant to weathering and erosion, contributing to its presence in various geological environments. Quartz can be found in multiple igneous, metamorphic, and sedimentary rocks. The mineral has many practical applications due to its physical and chemical properties. It is widely used in producing glass, ceramics, electronics, and abrasives. Quartz is also a popular gemstone and is used in jewelry-making.

Learn more about Sedimentary Rocks here: https://brainly.com/question/13353445.

#SPJ11

A high pressure system that tends to persist in the same geographic location for many days is referred to as a blocking high.

Blocking highs are characterized by atmospheric pressure that is higher than the surrounding regions, creating a stable and relatively calm weather pattern. These systems can cause weather conditions to persist, resulting in prolonged periods of clear skies, stable weather, and limited cloud cover.

These can have significant impacts on regional weather patterns, as they can block the movement of weather systems and lead to prolonged periods of dry or stable weather, or even cause heatwaves or cold spells depending on their location and season.

Learn more about high pressure system here:

https://brainly.com/question/33606433

#SPJ4

The given question is incomplete. Hence, the complete question is:

A high pressure system that tends to persist in the same geographic location for many days is referred to as a ____ high.

a. surface pressure rise

b. analogue method

c. blocking

d. ensemble

There are deep wells (more than 25 feet deep) and shallow wells (25 feet or less).

Hence, the correct answer is option e.

Wells can be categorized as deep wells or shallow wells based on their depth. Deep wells are typically those that extend more than 25 feet below the ground surface. These wells are drilled or dug deeper to access water sources located at greater depths, such as aquifers or underground water reservoirs. Deep wells are commonly used for obtaining larger water supplies for various purposes, including agriculture, industrial use, or municipal water supply.

On the other hand, shallow wells are those that have a depth of 25 feet or less. They may be hand-dug or drilled to access groundwater sources that are closer to the surface. Shallow wells are often used for domestic purposes, such as household water supply, livestock watering, or small-scale irrigation.

Learn more about aquifers here:

https://brainly.com/question/31083574

#SPJ4

The given question is incomplete. Hence, the complete question is:

There are _____ wells (more than 25 feet deep) and _____ wells (25 feet or less).

a. drilled..... irrigated

b. shallow....... deep

c. shallow... bored

d. deep..... wide

e. deep..... shallow

Incorporating synthetic forests in homes, schools, and communities can provide several benefits, including improved air quality, enhanced aesthetics, and a connection to nature.

Install vertical green walls that consist of vertically oriented panels or modules that are filled with vegetation, including artificial plants or a combination of real and synthetic plants. They can be integrated into interior spaces. Establish community gardens or rooftop gardens that integrate both real and artificial plants.

Integrate synthetic forests into educational settings, to create interactive learning spaces. Incorporate synthetic trees and plants in outdoor landscaping projects, particularly in urban areas where space is limited or environmental conditions are challenging for natural vegetation. When incorporating synthetic forests, it is essential to consider sustainability and maintenance aspects.

Know more about synthetic here

https://brainly.com/question/29261907

#SPJ4

A cinder cone volcano is the smallest of the three volcano types, and is built from ejected lava fragments that are typically pea- to walnut-sized lapilli.

A cinder cone volcano is a small and steep-sided hill formed by the accumulation of tephra (volcanic debris). This type of volcano is also known as a scoria cone, cinder volcano, or spatter cone, among other names.Cinder cone volcanoes form when lava fragments are ejected into the air during an explosive eruption. These fragments cool and solidify mid-air, forming small, lightweight rocks known as cinders.

Cinders eventually fall back to the ground, building up a cone-shaped hill around the volcanic vent. A cinder cone volcano usually has a crater at the summit, which is often the source of volcanic activity. The cone-shaped hill formed around the vent is composed of loose cinders and other volcanic debris and is prone to collapse.

To know more about cinder cone refer here : brainly.com/question/29630706

#SPJ11

The magnitude of the earthquake in Haiti in 2010 on the Richter scale is approximately 5.801.

Part A:

The magnitude of an earthquake, M, is given by the formula:

M = (2/3) * log(E / Eo)

Given:

E = 2.0 * 10¹⁵ joules

Eo = 10⁴ joules

Substituting the given values into the formula:

M = (2/3) * log(2.0 * 10¹⁵ / 10⁴)

Now, we can simplify the expression:

M = (2/3) * log(2.0 * 10¹) - log(10⁴4)

M = (2/3) * log(2.0) + (2/3) * log(10¹⁵) - log(10⁴4)

M = (2/3) * 0.301 + (2/3) * 15 - 4.4

M = 0.201 + 10 - 4.4

M = 5.801

Therefore, the magnitude of the earthquake in Haiti in 2010 on the Richter scale is approximately 5.801.

Part B:

If the energy release of one earthquake is 10,000 times that of another, we need to find how much larger the Richter scale reading is for the larger earthquake.

Let's assume the energy release of the smaller earthquake is E1, and the energy release of the larger earthquake is E2, where E2 = 10,000 * E1.

The Richter scale readings, M1 and M2, for the smaller and larger earthquakes respectively, can be calculated using the formula:

M = (2/3) * log(E / Eo)

For the smaller earthquake:

M1 = (2/3) * log(E1 / Eo)

For the larger earthquake:

M2 = (2/3) * log(E2 / Eo)

= (2/3) * log((10,000 * E1) / Eo)

= (2/3) * log(10,000) + (2/3) * log(E1 / Eo)

= (2/3) * 4 + (2/3) * log(E1 / Eo)

= (8/3) + (2/3) * log(E1 / Eo)

The difference in Richter scale readings is given by:

M2 - M1 = [(8/3) + (2/3) * log(E1 / Eo)] - [(2/3) * log(E1 / Eo)]

= 8/3

Therefore, the Richter scale reading for the larger earthquake is 8/3 or approximately 2.667 times larger than the Richter scale reading for the smaller earthquake.

To know more about Richter here

https://brainly.com/question/24037139

#SPJ4

On the Richter scale, the magnitude, M, of an earthquake is given by M= 2/3logE/Eo, where E is the energy released by the earthquake measured in joules, and Eo is the energy released by a very small reference earthquake. Eo has been standardized to 10^4.4 joules.

Part A

The earthquake in Haiti in 2010 released 2.0*10^15 joules. What was its magnitude on the Richter scale?

Part B

If the energy release of one earthquake is 10,000 times that of another, how much larger is the Richter scale reading of the larger earthquake than the smaller?

These faults are orientated parallel to the direction of plate motion.

A tectonic plate boundary known as a transform fault is where two plates slide past one another horizontally. The orientation of these faults, which is often parallel to the path of plate motion, distinguishes them. Transform faults are present along the mid-ocean ridges, wherein new oceanic crust is generated by volcanic activity. These faults link the various ridge segments.

The lateral movement of the plates as they pass one another is accommodated by these transform faults. In plate tectonics and the whole movement of the Earth's lithospheric plates, transform faults are crucial. They permit horizontal movement to accommodate the relative motion between neighbouring plates.

Know more about plate motion here

https://brainly.com/question/33453139

#SPJ4

The feature responsible for bringing sufficient rainfall to support agriculture along the north coastal zone of the Maghreb is the Mediterranean Sea.

The Mediterranean Sea is a sea connected to the Atlantic Ocean, surrounded by the Mediterranean Basin and almost completely enclosed by land, on the north by Southern Europe and Anatolia, on the south by North Africa, and on the east by the Levant in West Asia.

The proximity of the Mediterranean Sea provides a source of moisture that creates a favorable environment for rainfall in this region.

Know more about Mediterranean Sea:

https://brainly.com/question/557668

#SPJ11

An illustration of weather conditions based on meteorological information across a particular region is called a weather map.

Weather maps are graphical representations that display various weather elements such as temperature, precipitation, wind direction and speed, air pressure, and cloud cover. They provide a visual overview of the current and predicted weather conditions in a specific area. Weather maps are created using data collected from weather stations, satellites, radars, and other meteorological instruments. Different symbols, colors, and contour lines are used on weather maps to represent different weather phenomena and conditions.

By analyzing a weather map, meteorologists can make predictions about upcoming weather patterns, track the movement of weather systems, and issue forecasts and warnings to the public. Weather maps are widely used in meteorology, aviation, agriculture, and other industries that rely on accurate weather information. They are essential tools for understanding and predicting weather conditions across a particular region.

Learn more about Speed here,

https://brainly.com/question/13943409

#SPJ11

According to the picture shown below, it is clear that the cut bank is located on the outside of a meander bend.

Hence, the correct answer is option e.

A meander bend is a pronounced curve or loop formed by a river as it flows through its channel. They develop as a result of erosion and deposition processes. As water flows downstream, it tends to erode the outer banks of a river bend, resulting in a gradual migration of the channel towards the opposite bank. This erosion and deposition cycle causes the meander to grow and change over time.

Meander bends often exhibit distinctive features, including a deepened channel on the outer bank (cutbank) and a point bar on the inner bank where sediment is deposited. The flow of water within a meander bend is slower on the inner bank and faster on the outer bank, leading to the formation of characteristic features such as slip-off slopes and river cliffs. Meander bends are common in low-gradient rivers and contribute to the dynamic nature of river systems.

Learn more about meander here:

https://brainly.com/question/31872202

#SPJ4

The given question is incomplete. Hence, the complete question is:

A Missouri River Cut Bank The following photo shows a typical cut bank on the Missouri River (iPhone for scale). Note the steep profile with fine-grained sediments above coarser sands and gravels.

Which of the following statements are true?

a. Neither erosion nor deposition is occurring at the cut bank.

b. Deposition is the dominant process at the cut bank.

c. A cut bank forms when a meander is cut off from the main channel.

d. A cut bank is located on the inside of a meander bend.

e. A cut bank is located on the outside of a meander bend.

The answer is Sea-floor spreading. Sea-floor spreading is the process that continually adds new crust to the Earth's surface.

Sea-floor spreading occurs at mid-ocean ridges, underwater mountain ranges that run through the Earth's oceans. Along these ridges, new oceanic crust is formed as magma rises from the Earth's mantle and solidifies to create new crust. As the magma cools and solidifies, it forms a continuous strip of new oceanic crust. The process of sea-floor spreading involves the movement of tectonic plates. Tectonic plates are large, rigid pieces of the Earth's lithosphere that float on the semi-fluid asthenosphere beneath them. The plates move apart at mid-ocean ridges due to underlying convection currents in the mantle. As the tectonic plates move apart, magma from the cover rises to fill the gap, creating a new crust at the ridge. This new crust then moves away from the bank in both directions, carrying an older oceanic crust. Over time, this movement results in the continuous creation of new crust and the spreading of the ocean floor. Sea-floor spreading is crucial in plate tectonics and the Earth's geological processes. It is an essential mechanism for recycling oceanic crust, as the older crust is eventually consumed through subduction zones, where it sinks back into the mantle.

Learn more about Sea Floor here: https://brainly.com/question/7674763.

#SPJ11

During the waning phases of the moon, less of the moon's near side is seen each night. This statement is false.

During the waning phases of the moon, the illuminated portion of the moon that we can see from Earth decreases each night. The moon goes through phases because as it orbits around the Earth, the relative positions of the sun, Earth, and moon change.  When the moon is in its waning phases, it appears to be getting smaller and less illuminated each night. As a result, less of the moon's near side is visible to us. So, during the waning phases, we see less of the moon's near side each night.

To visualize this, imagine the moon as a circle. As it goes through its waning phases, the illuminated portion of the moon gets smaller and smaller, until we see only a thin crescent or no visible moon at all.  In summary, during the waning phases of the moon, less of the moon's near side is seen each night, which makes the statement false.

To know more about illuminated visit:

https://brainly.com/question/32835768

#SPJ11

When reading a surface weather chart, centers of high and low pressure are represented by lines called isobars.

Hence, the correct answer is option d.

Isobars are lines on a weather map that connect points of equal atmospheric pressure. They depict areas of high and low pressure across a given region. They are commonly used to visualize and analyze weather patterns, as they reveal the spatial distribution and strength of pressure systems.

The spacing between isobars indicates the rate of pressure change, with closely spaced isobars indicating steep pressure gradients and strong winds. Meteorologists use isobars to identify regions of low or high pressure, which influence wind flow, air masses, and weather conditions. Isobars are essential for understanding weather patterns, forecasting storms, and determining the movement and intensity of weather systems.

Learn more about isobars here:

https://brainly.com/question/13434165

#SPJ4

The given question is incomplete. Hence, the complete question is:

When reading a surface weather chart, centers of highs and lows are represented by pressure lines called

a. millibars.

b. isotherms.

c. contours.

d. isobars.

Overburden is a term used in surface mining to refer to the layers of soil and rock that must be removed to get to a mineral deposit. It refers to the material that lies above an area that is being mined.

Surface mining is the most commonly used type of mining today, and it involves removing overburden to access mineral deposits. This process can be accomplished through various techniques such as strip mining, open-pit mining, mountaintop removal, and area mining. Strip mining is a type of surface mining that involves the removal of a layer of soil and rock in order to access a mineral deposit, usually coal.

This layer of soil and rock is called overburden and it must be removed before the mineral can be extracted from the ground. The removal of overburden is an important step in the process of mining. It can be done through the use of heavy equipment, such as bulldozers and excavators. Once the overburden has been removed, the mineral deposit can be accessed and mined.

To know more about surface mining refer here : brainly.com/question/13327627

#SPJ11

The place in the crust or mantle where igneous rocks begin to form is called the magma chamber. A magma chamber is the place in the crust or mantle where igneous rocks begin to form.

It is a large underground pool of liquid rock. As the magma cools, it can form crystals and become solid. The rock that forms in a magma chamber is called intrusive or plutonic igneous rock. Intrusive igneous rocks are formed inside the Earth's crust, and they cool down slowly.

This slow cooling allows crystals to grow and become large. The result is a coarse-grained rock, such as granite or gabbro. Extrusive igneous rocks are formed on the Earth's surface, usually as a result of a volcanic eruption. The magma is exposed to air or water, which causes it to cool quickly. This rapid cooling results in small or no crystals forming, producing a fine-grained rock, such as basalt.

To know more about magma chamber refer here : brainly.com/question/1177737

#SPJ11

The evidence of thawing in the ice sheet typically becomes noticeable in late summer. This is a result of several weeks of higher temperatures.

During late summer, the ice sheet experiences warmer temperatures, causing some of the ice to melt. This melting process can be seen through various signs of thawing, such as the formation of melt ponds or streams on the surface of the ice sheet.  The higher temperatures that precede the thawing are responsible for gradually weakening the ice, making it more susceptible to melting. These elevated temperatures can lead to the gradual thinning of the ice sheet, as well as the increased flow of meltwater into the surrounding environment.

It's important to note that the exact timing and extent of thawing can vary depending on factors such as the region, climate conditions, and the size of the ice sheet. However, the general pattern is that late summer is when the ice sheet starts to show evidence of thawing after a period of higher temperatures.

To know more about thawing visit:
https://brainly.com/question/32400242
#SPJ11

The upstream side of the Roche Moutonnée is smooth, indicating that the glacier is flowing from that direction.

Hence, the correct answer is option c - smooth.

The upstream side of the roche moutonnée is typically smooth and gently sloping, indicating that the glacier is flowing from that direction. A roche moutonnée is an asymmetrical bedrock knob or hill formed by glacial erosion.

As a glacier advances, it plucks and scrapes the bedrock, resulting in a distinctive shape. The upstream side is the side where the glacier is coming from, and the smooth, gently sloping nature of this side is a result of the glacial erosion and abrasion. In contrast, the downstream side often exhibits a steeper and more jagged face, which is a result of the glacier's plucking and carving action as it moves forward.

Learn more about erosion here:

https://brainly.com/question/30587260

#SPJ4

The given question is incomplete. Hence, the complete question is:

The upstream side of the Roche Moutonnée is __________, indicating that the glacier is flowing from that direction.

a. outwash

b. drumlins

c. smooth

d. glacial till

The seismic focus is the point where an earthquake originates, the point where the waves first reach the surface is called the epicenter.

The seismic focus (also known as the hypocenter) is the actual location within the Earth where an earthquake originates. It is the point where the fault slip occurs, releasing energy and generating seismic waves. The seismic focus is usually located underground, within the Earth's crust or upper mantle. On the Earth's surface, the point directly above the seismic focus is called the epicenter.

It is the point where seismic waves first reach the surface. When an earthquake occurs, the seismic waves radiate outward from the focus in all directions, and the epicenter represents the point on the surface closest to the seismic activity. Determining the location of the epicenter is crucial for earthquake monitoring and reporting.

Know more about earthquake here

https://brainly.com/question/29500066

#SPJ4

In gerontology, the term well elderly describes the elderly people who are healthy and active. The right answer is c.

In gerontology, the term "well elderly" refers to older adults who are in good health and have a high level of functioning, both physically and mentally. Well elderly individuals typically do not have significant chronic illnesses or disabilities that limit their daily activities. They are generally independent and able to engage in a variety of activities, maintain social connections, and enjoy a good quality of life.

The concept of well elderly emphasizes the positive aspects of aging and the potential for older adults to maintain health and well-being as they age. It focuses on promoting healthy lifestyles, preventive healthcare, and the maintenance of physical and mental abilities through exercise, proper nutrition, social engagement, and cognitive stimulation.

The correct answer is option c.

Know more about gerontology here

https://brainly.com/question/31672786

#SPJ4

The question seems incomplete. The complete question is:

In gerontology, the term _____ describes the elderly people who are healthy and active.

somewhat impaired elderly

frail elderly

well elderly

"The Natural Law of Climate Change" in my training data up until September 2021. It's possible that Fabian Brunner is a relatively unknown figure in the context of climate change or that the controversy you mentioned has emerged after my knowledge cutoff date.

The energy transition refers to the global shift from fossil fuels to renewable energy sources and increased energy efficiency, driven by the need to mitigate climate change and reduce greenhouse gas emissions. While the transition holds promise for mitigating climate change and creating a sustainable energy future, it is not without its challenges and complexities.

Some of the common challenges and criticisms associated with the energy transition include Cost: Transitioning to renewable energy sources and upgrading infrastructure can require significant investments, which some argue can be a barrier to implementation.

Technological Limitations: The intermittent nature of renewable energy sources like solar and wind power can pose challenges for grid stability and energy storage, although advancements in technology are helping to address these limitations.

Energy Security: Critics argue that relying on renewable energy sources may reduce energy security and independence, particularly in regions that heavily rely on fossil fuel exports.

Social and Economic Impacts: The transition can have economic and social implications, such as job displacement in industries heavily reliant on fossil fuels. Ensuring a just transition that supports affected communities is crucial.

To learn more about energy, click here.

https://brainly.com/question/1932868

#SPJ4

A life-form in the Precambrian time was cyanobacteria. Cyanobacteria is also known as blue-green algae.

Cyanobacteria are a group of photosynthetic bacteria that can be found in various aquatic and terrestrial environments. They are among the oldest known life-forms on Earth. They are capable of carrying out photosynthesis, using sunlight as an energy source to convert carbon dioxide and water into organic compounds while releasing oxygen.

They played a vital role in the oxygenation of Earth's early atmosphere, which eventually led to the development of aerobic organisms. They can form colonies or filaments, and some can even produce specialized cells called heterocysts for nitrogen fixation.

They are known for their ability to thrive in diverse habitats, from freshwater and marine ecosystems to arid deserts. They also serve as a significant food source for various organisms and contribute to the ecological balance of many ecosystems.

Learn more about cyanobacteria here:

https://brainly.com/question/11641662

#SPJ4

The given question is not properly written. Hence, the proper question is:

A life-form in the pre-Cambrian time was ____.

a. cyanobacteria

b. reptiles

c. humans

d. dinosaurs

Within the major population centers of the Gulf Coastal Plains region, the suburban areas are becoming more populated, while urban areas are becoming more densely populated.

Population is defined as the entire number of people living in a particular area. It could be a country, city, or any other geographical area. The number of people living in a certain area is known as population density. A suburban area is a mixed-use or residential area, existing either as part of a city or urban area or as a separate residential area within commuting distance of a city.

Suburban regions usually have lower population densities than urban areas. An urban area is a region that includes densely populated municipalities, suburbs, and other urban areas. In comparison to rural areas, urban areas are characterized by a greater concentration of people, buildings, and infrastructure.

Suburban areas are becoming more populated, while urban areas are becoming more densely populated, in the major population centers of the Gulf Coastal Plains region.

To know more about densely populated refer here : brainly.com/question/32078670

#SPJ11

The correct ranking from highest amount of dark (recent) lava flows to lowest amount is option B: hualalai, mauna kea, kohala, mauna loa.

The question asks for the ranking of the volcanoes based on the highest amount of dark (recent) lava flows to the lowest amount. Dark lava flows indicate recent volcanic activity.  In option B, hualalai is ranked first because it has the highest amount of dark lava flows. Mauna kea is ranked second, followed by kohala, and finally mauna loa, which has the lowest amount of dark lava flows.

To know more about Mauna kea visit:

brainly.com/question/17477266

#SPJ11

Maintaining the status quo: understanding local use of resilience strategies to address earthquake risk in Oklahoma involves studying the strategies implemented to mitigate earthquake risk in the state.

This research aims to understand how local communities in Oklahoma are utilizing various resilience strategies in order to maintain their current situation in the face of earthquake risks. Oklahoma has seen a rise in the frequency of earthquakes. Communities should incorporate resilience strategies into their planning in order to deal with new hazards, according to previous studies. We don't know much about how emergency managers plan for earthquakes because they are new, especially in relation to other state hazards.

This study uses in-depth interviews to find out how key stakeholders in local governments across the state are handling this new risk. As a general rule, members depict using methodologies that support the state of affairs, as opposed to building flexibility in light of the shaking.

Learn more on mitigate strategies here:

brainly.com/question/30564559

#SPJ11

Grain size of sedimentary rocks made of sediment can be indicative of the energy of sediment transport. The right answer is a.

The grain size of sedimentary rocks can provide valuable information about the energy of sediment transport during their formation. The energy of sediment transport refers to the force or power of the agent that moves and deposits the sediment.

The general principle is that higher energy environments have the ability to transport larger and coarser sediment particles, while lower energy environments are more limited in their ability to transport and deposit finer particles. As a result, the grain size of sedimentary rocks can be used as an indicator of the energy conditions under which the sediments were deposited.

The correct answer is option a.

Know more about grain size here

https://brainly.com/question/32412511

#SPJ4

The question seems incomplete. The complete question is:

What property of detrital sedimentary rocks can be indicative of the energy of sediment transport?

grain size

fossils

mudcracks quartz

ripple marks

The statement suggests that the research utilized RJ-MCMC inversion of surface waves to infer and study the asthenospheric flow from East Asia to the Philippine Sea plate.

The statement you provided refers to a scientific study or research related to the asthenospheric flow from East Asia to the Philippine Sea plate using a method called RJ-MCMC inversion of surface waves. Let's break it down:

Asthenospheric flow: The asthenosphere is a semi-fluid layer in the upper mantle beneath the Earth's lithosphere. Asthenospheric flow refers to the movement or flow of this material. The asthenosphere is responsible for the movement of tectonic plates and plays a crucial role in plate tectonics and the dynamics of the Earth's interior.

East Asia and the Philippine Sea plate: East Asia refers to the region encompassing countries such as China, Japan, Korea, and surrounding areas. The Philippine Sea plate is one of the tectonic plates in the western Pacific Ocean, located east of the Philippines. The interaction between these two plates can have significant geological implications.

RJ-MCMC inversion: RJ-MCMC stands for Reversible-Jump Markov Chain Monte Carlo. It is a computational method used in geophysics and other scientific fields for inverse modeling and parameter estimation. In the context of the statement, RJ-MCMC inversion is likely used to analyze seismic surface waves and derive information about the asthenospheric flow between East Asia and the Philippine Sea plate.

Surface waves: Surface waves are a type of seismic waves that propagate along the Earth's surface. They are generated by earthquakes and other seismic events. Surface wave analysis provides valuable information about the Earth's subsurface structure, including the properties of the asthenosphere and tectonic plate boundaries.

The statement suggests that the research utilized RJ-MCMC inversion of surface waves to infer and study the asthenospheric flow from East Asia to the Philippine Sea plate. This type of analysis can provide insights into the dynamics and geological processes occurring in the region, helping scientists better understand plate tectonics, mantle convection, and the behavior of Earth's interior.

To know more about asthenosphere follow the link:

https://brainly.com/question/33172368

#SPJ4