What happened after oxygen was introduced to the atmosphere?.

The mass of oxygen is needed to react with 1.39 gal of methanol  is 6266.4g

Given:

methanol = 1.39 gal = 1.39 *3.79 =5.2681 L=5268.1 mL

density of methanol is 0.793 g/mL

weight of methanol = 0.793 * 5268.1 =4177.6 g

From the Balance Equation we know that 2 mole of methanol react with 3 mole of oxygen

since

mass of oxygen is needed to react = 4177.6/2 * 3 =6266.4g

complete Que :

What mass of oxygen is needed to react with 1.39 gal of methanol according to the balanced equation below? (1.00 gal - 3.79 L, and the density of methanol is 0.793 g/mL.) 2 CH2OH(1) + 3 02(g) 2 C02(%) + 4H2O

To learn more about mole refer,

https://brainly.com/question/15356425

#SPJ4

An compound m peak has a relative intensity of 84%, and its m 2 peak is 28% stronger. It's probably chlorine. Chemical element chlorine has the symbol Cl and atomic number 17.

It is the second-lightest halogen, and although it is between fluorine and bromine on the periodic table, most of its properties fall somewhere in the middle. At room temperature, chlorine is a yellow-green gas. It is called chlorine.

A compound is a substance created when two or more chemical elements are chemically bonded together. Ionic and covalent bonds are the two most common types of bonds that hold elements in a compound together.

Learn more about chlorine here

https://brainly.com/question/14962130

#SPJ4

The statement above may result in 7.82 moles if carbon dioxide being produced.

The use of fossil fuels including coals, natural gas, or oil is one of the major sources of dioxide emissions, accounting for 87 percent of all emissions produced by humans. The burning of fossil fuels is the major human emission source of carbon dioxide.

The chemical process looks balanced like this:

2C₄H₁₀(g)+13O₂(g)→8CO₂(g)+10H₂O(g)

Since 1 mole if butane combines using 13 moles or oxygen in the reaction described above, 3.5 moles for butane will need:

Required moles of O₂=3.12×13mol

Required moles of O₂=40.5mol

moles of O₂=8×12.69÷13

moles of O₂=7.80mol

As a result, 7.80 moles if carbon dioxide will be produced.

To know more about co2 visit:

brainly.com/question/28870590

#SPJ4

By multiplying the theoretical yield, or the amount that the process should theoretically produce, by 100.

Resistance or resistance to a force, impact, or movement is a reactionary act, process, or occurrence. especially: a reaction to the a particular treatment, condition, or stimulus; inclination toward a past but typically antiquated political or social system or policy.

One or more chemicals, also referred to as reactants, are transformed into one or more other substances, often referred to as products, in a chemical reaction. Substances are built up of active compounds or chemical elements. Burning is one of the five basic types of chemical reactions, along with combining, breakdown, only one, double-replacement, and replacement.

To know more about reaction visit:

brainly.com/question/28984750

#SPJ4

The concentration of the solution is .10M

Here given,

V1 = 5.Oml

M1 = .20M

V2 = 10.0ml

We have to find M2

For determining a missing dilution equation value, where M1 and M2 are the molarities of the solutions, expressed in mol/L or M, and V1 and V2 are the volumes of the solutions.

By applying V1M1 = V2M2

By substituting values,

(5.0 ml)(0.20 M) = (10.0 ml) (x M)

x = (5.0)(0.20)/10.0

x = 0.10 M

The fact that one begins with 100. ml and ends with 3.0 ml has no bearing on the final concentration. It would influence the total number of moles of HCl present but not the concentration.

Therefore the concentration of solution is .10M.

To learn more about dilution refer to :

https://brainly.com/question/24881505

#SPJ4

The likely identity of compound that caused the cloudiness is because the triphenylphone oxide is the by product in the witting reaction . the likely identity was HCl.

The ethanol does not allow the DNA to dissolve in it.  so, the more cold the ethanol the less soluble will be the DNA.  the isopropanol is the simplest secondary alcohol. The likely identity is HCl and some of the other gas. The hot iso propanol was use instead of cold isopropanol because of the hot gravity filtration is produce more consistence crystal.

The iso propanol is the colorless and the flammable organic compound.

To learn more about isopropanol here

https://brainly.com/question/29353828

#SPJ4

The deferred gross profit that would appear on the 2019 balance sheet is the amount of revenue that has been earned but not yet received as of the balance sheet date:

Gross profit deferred is 30% × ($600,000 – ($200,000 + $250,000)) + 40% × ($750,000 – 300,000)= $225,000.

The deferred gross profit on the 2019 balance sheet is the amount of revenue that has been earned but not yet received as of the balance sheet date.

This can be calculated by taking the gross profit percentage for each revenue type and multiplying it by the difference between the total revenue and the amount of revenue already received.

In this example, that would be 30% of the difference between $600,000 and $200,000 + $250,000 plus 40% of the difference between $750,000 and $300,000, which equals $225,000.

The Pattison Company began operations on January 2, 2018, and appropriately uses the installmentsales method of accounting. The following data are available for 2018 and 2019:

                                                                          2018            2019

Installment sales                                        $600,000      $750,000

Cash collections from:

2018 sales                                                      200,000      250,000

2019 sales                                                                         300,000

Gross profit on sales                                      30%                40%

Learn more about accounting:

https://brainly.com/question/1033546

#SPJ4

In a molecular solid, individual molecules can undergo various types of motion, including translational motion (movement from one point to another), rotational motion (spinning around a fixed axis), and vibrational motion (oscillating or shaking about a fixed position).

When the temperature of a solid copper pipe increases, the motion of the free electrons within the copper atoms will also increase. This is because an increase in temperature corresponds to an increase in the kinetic energy of the particles in a substance, which leads to an increase in their motion.

In a molecular liquid at a low temperature, the individual molecules will be moving relatively slowly, with relatively low velocities. The arrows representing the velocity vectors of the molecules will be relatively small and widely spaced.

In a molecular liquid at a high temperature, the molecules will be moving more quickly, with higher velocities. The arrows representing the velocity vectors of the molecules will be larger and more closely spaced.

In a molecular gas at a low temperature, the individual molecules will be moving relatively slowly, with relatively low velocities. The arrows representing the velocity vectors of the molecules will be relatively small and widely spaced.

In a molecular gas at a high temperature, the molecules will be moving more quickly, with higher velocities. The arrows representing the velocity vectors of the molecules will be larger and more closely spaced.

In a particulate representation of a 1.0 L sample of molecular gas, the individual molecules will be spaced relatively far apart from each other, with relatively low velocities. The arrows representing the velocity vectors of the molecules will be relatively small and widely spaced.

In a particulate representation of the same sample of gas after it has been compressed to 0.5 liters, the molecules will be spaced much closer together, with higher velocities. The arrows representing the velocity vectors of the molecules will be larger and more closely spaced.

In a particulate representation of a solid, the individual particles will be closely packed together in a regular, ordered arrangement. The particles will be vibrating in place, with little overall movement or change in position. In a particulate representation of a liquid, the particles will be more loosely packed together, with more freedom of movement.

The particles will be moving and flowing past each other, with relatively low velocities. In a particulate representation of a gas, the particles will be spaced far apart from each other, with a large amount of empty space between them. The particles will be moving quickly and randomly in all directions, with relatively high velocities.

Learn more about molecule:
https://brainly.com/question/29585498

#SPJ4

Acetic acid is a covalent compound but, when dissolved in water, it is a weak electrolyte. It is a vulnerable electrolyte for the reason that compound does now no longer dissociate absolutely to shape ions.

Electrolytes are materials which could behavior power while they may be located in solution. This is because of their capacity to provide charged debris in solution.

These debris are referred to as ions. Acetic acid is a vulnerable acid because it partly dissociates in water ensuing withinside the formation of acetate and hydronium ions. It is a vulnerable electrolyte for the reason that compound does now no longer dissociate absolutely to shape ions.

Read more about water :

https://brainly.com/question/17089766

#SPJ4

The interaction of reproductive system hormones with other body systems that estrogen activates is incorrect.

In contrast to other body systems, the reproductive system works to secure the survival of an entire species, whereas all other body systems work to ensure the life of the individual.

Sexuality and fertility are influenced by the three primary reproductive hormones, estrogen, testosterone, and progesterone. Pregnancy, puberty, menstruation, menopause, sex drive, sperm production, and other processes are all controlled by them. These hormones are made in the testes and ovaries in females.

To know more about reproductive system visit:-

https://brainly.com/question/14235396

#SPJ4

question:-

which of the following is not a correct way in which the reproductive system hormones interact with other body systems i.e estrogen, testosterone, and progesterone?

There is one electron of hydrogen that needs a full valence shell.

Hydrogen can either share electrons or lose electrons and have a full or empty outer shell, so it can also form ionic bonds. Hydrogen can donate its lone electrons to chemicals such as fluorine and chlorine which have seven electrons in their outermost shell.

The outermost shell of an atom is called the valence shell. A complete valence shell means that the valence shell is fully occupied forming a stable octet. Halogens such as helium, neon, argon and xenon. It has a completely filled valence shell. A valence electron is an electron in the outermost shell of an atom, and the atomic number of hydrogen is 1. So the total number of electrons is 1 and the valence electron is also 1.

Learn more about A full valence shell here:-https://brainly.com/question/10077415

#SPJ4

Hydrogen has a single atomic nucleus. Therefore, there will be one electron overall and one valence electron.

Chemistry's concept of valence, sometimes written as valency, refers to an element's ability to mix with a certain number of other atoms. The phrase, which was first used in 1868, can describe both the general power of the combination of an element as well as the numerical magnitude of that power of combination.

A significant issue for 19th-century chemists was explaining and organizing valence. The focus of the majority of the work was on developing empirical guidelines for figuring out the valences of the elements because there was no good hypothesis explaining their origin. Characteristic valences for the elements were calculated based on how many hydrogen atoms each one of their atoms might mix with.

Learn more about valence here:

https://brainly.com/question/24709616

#SPJ4

The small pool can hold 25.92 m³ of water.

Let

x=the volume of the small swimming pool

y=the volume of the large swimming pool

z= the scale factor

we know that

The volume of the small swimming pool is equal to the scale factor elevated to the cube multiplied by the volume of the large swimming pool

x=z³y

If the scale factor of the small pool to the large pool is equal to 0.12, the ratio of their volumes should be equal to 0.12³ or equal to 1.728 x 10⁻³. We multiply this value by the given volume of the large pool to get the volume of the small pool.

         volume of small pool = (1.728 x 10⁻³)(15,000 m⁻³)

         volume of small pool = 25.92 m³

Know More About Volume at:

https://brainly.com/question/15613623

#SPJ4

When 1 mol of F₂₍g₎ react with excess of NaOH₍g₎, then the amount of OF₂₍g₎ produced is halved.                                                                                

NaOH(sodium hydroxide) is very corrosive. It is generally used as a solid or a 50% solution.  It is used in bar soaps and detergents.

Let us assume a balanced reaction that occurs when F₂ with NaOH  2F₂₍g₎ + 2NaOH₍aq₎  ⇒ OF₂₍g₎ + 2NaF₍g₎ + H₂O₍l₎                                      

Moles of OF₂ and NaF obtained from 2moles of F₂, using molar ratios derived from the balanced chemical reaction

2mol F₂ × 1mol OF₂ ÷ 2mol F₂ =  1mol OF₂

2mol F₂ × 2mol NaF ÷ 2mol F₂ = 2mol NaF

Now, let's compare with moles of OF₂ and NaF obtained from 1 mol of F₂, again using the same molar ratios derived from the balanced chemical equation.

1mol F₂ × 1mol OF₂ ÷ 2 mol F₂ = 0.5 mol OF₂

1mol F₂ × 2mol NaF ÷ 2 mol F₂ = 1mol NaF

Since, we have half the amount of F₂, we obtain half the amount of the products, then the only right option is that the amount of OF₂₍g₎ produced is halved.

When 1 mol F₂ reacts with excess of NaOH, the amount of OF₂ produced is halved.

learn more about molar ratios: https://brainly.com/question/15371665

#SPJ4

The ones is on the citizen to be aware of who is running for office. Discovering the location of the polling place for voting in their particular constituency is another duty of the citizen.

Electronic voting machines are available for use. A voter can also voice their opinions on crucial matters of progress, development, and growth through the representatives they elect. Furthermore, voting allows citizens a chance to express their views on the most important subjects. Undoubtedly progressive and freeing, the feeling of empowerment.

It entails putting feelings under control in favour of gathering factual evidence. citizens should research media and websites objectively for voting, rather than just using those that support their viewpoints and reinforce them.

Learn more about voting here

https://brainly.com/question/14204008

#SPJ4

Answer:

A is the correct answer

Explanation:

The element with the highest standard free energy of formation is All elements in their standard states have a value of zero.

The correct answer is All elements in their standard states have a value of zero.

The standard free energy of formation of a substance is defined as the free-energy change which results when 1 mol of substance is prepared from its elements at the standard pressure of 1 atm and a given temperature, usually 298 K.

At 25^∘ C , the free energy of formation of H2O (l) is - 56700 cal/mol while that of its ionization to H^ + and OH^ - is 19050 cal mol^-1.

Learn more about free energy of formation at: https://brainly.com/question/14415025

#SPJ1

An item will move and its velocity will vary when unbalanced forces are applied to it while it is at rest. Keep in mind that a change in velocity can result from changes in either direction or speed.

When a force acts on an object, the thing changes size or shape, begins to move, stops moving, accelerates, or decelerates. When two objects interact, they each apply a force that is equal in magnitude but directed in the opposite direction with some velocity.

An object in motion can also be stopped by unbalanced forces. Wind resistance, gravity, and friction are the three basic forces that slow moving objects down. Balanced forces are equal forces acting in opposing directions.

Learn more about velocity here

https://brainly.com/question/16809028

#SPJ4

London dispersion < dipole-dipole < hydrogen-bonding < ionic is the correct order of intermolecular forces.

The forces that promote interaction between the solute and solvent molecules and impact their solubility are known as inter-molecular forces of attraction. They were generally categorized as follows:

Ionic: This is the strongest force of attraction between positively and negatively charged atoms or molecules, called ions.

Hydrogen bonds are the forces of attraction that exist in molecules where a hydrogen atom is directly connected to an electronegative atom, such as an oxygen, nitrogen, or fluorine atom.

Dipole-dipole: These occur between polar molecules, which are molecules with a persistent dipole.

The weakest intermolecular force, known as dispersion or London forces, develops in non-polar molecules when an immediate or transient dipole forms.

The intermolecular forces are arranged as follows, from weakest to strongest:

London dispersion < dipole-dipole < hydrogen-bonding < ionic.

For more questions like Intermolecular forces click the link below:

https://brainly.com/question/13124206#

#SPJ4

A mixture of nitrogen, oxygen, fluorine and neon are in a container which has a tiny, tiny pinhole leak. The slowest element to leave the container is fluorine.

Gas output is expressed as:

Rate ∝ 1 / √M

rate of effusion is inversely proportional to the square root of the molecular weight.

molecular weight of nitrogen = 14amu

molecular weight of oxygen = 16 amu

Molecular weight of fluorine = 19amu

The rate of effusion with increasing molecular weight. Fluorine is therefore the element that escapes the slowest from the container. There is a mixture of nitrogen, oxygen, fluorine and neon inside the container with a very small leak. elements fluorine are the slowest to leak out of the container

Click here to learn more about effusion

https://brainly.com/question/8804761

#SPJ4

The statement 'granular fertilizer plus postemergence herbicide products are more expensive than sprayable postemergence herbicide products per unit area treated given that the active ingredients are the same in both products' is true.

When the fertilizer is in a granular form, it is more expensive than a fertilizer in a sprayable form. Fertilizers can be described as chemicals that are added to soil in order to improve the nutritional content of the soil.

In the granular form, a fertilizer and a herbicide will be present as two different products, the cost of both will be different and hence more expensive combined. In a sprayable form, the postemergence herbicide and the fertilizer can occur together inside a spray and hence is cheaper.

The question will correctly be written as:

granular fertilizer plus postemergence herbicide products are more expensive than sprayable postemergence herbicide products per unit area treated given that the active ingredients are the same in both products. True or false

To learn more about fertilizer, click here:

https://brainly.com/question/24544067

#SPJ4

Based on the half-life of  Cobalt-60;

The half-life of a substance is defined as the time taken for half of the original amount present in a substance to decay or disappear.

This means that after the half-life of a substance has elapsed, the original amount of substance will reduce by half.

The half-life of substances is an important parameter that can be used to estimate the age of substances.

Considering the given question:

Cobalt-60 has half-life of 5.27 years.

The amount of original sample = 15 mg sample

The amount that will remain after one half-life will be 15 mg/2 = 7.5 mg

The amount that will remain after two half-lives will be 7.5mg/2 = 3.75 mg

The amount that will remain after three half-lives will be 3.72 mg/2 = 1.875 mg

Learn more about half-life at: https://brainly.com/question/1160651

#SPJ1

A spectrophotometer is a device that counts the number of photons that are absorbed after they have passed through a sample solution. The concentration of the molecule must be known.

The quantitative assessment of a material's reflection or transmission qualities in relation to wavelength is the focus of the branch of electromagnetic spectroscopy known as spectrophotometry. An analytical tool called a spectrophotometer is used to determine the emission or reflection of visible light, UV light, or infrared light objectively. Spectrophotometers calculate intensity as a function of light source wavelength.

The amount of solute in a specific amount of solution determines a concentration of the molecule. The number of moles of solute in 1 L of solution, or molarity, is used to express concentrations.

In chemistry, there are four different forms of concentration of the molecule: volume concentration, number concentration, molar concentration, and mass concentration.

learn more about spectrophotometer here

https://brainly.com/question/24195565

#SPJ4

Increasing Size of Atom ; Rb, Na, Be b. Sr, Se, Ne c. Fe, P, O

In a chemical reaction, atoms cannot be formed or destroyed since they are indivisible units. The mass and chemical characteristics of each atom of a specific element are the same. Different elements' atoms have varying weight and chemical characteristics. Compounds are created when atoms combine in ratios of small whole numbers.

A neutral atom is simpler to remove an electron from than a positive ion, and a negative ion is even simpler. Therefore, O+>O>O is the proper order for IE, as lower IE denotes easier electron removal.

The definition of electron affinity is. when an electron is added to a neutral atom to create an anion, how much energy is released? When an electron is added to a neutral gaseous atom to create a negative ion, the atom's potential energy changes. This shift is known as the electron affinity.

The initial electron affinity is the energy produced when an electron is introduced to a gaseous atom that is in its ground state to create a gaseous negative ion. EA is the symbol, while kJ/mol is the unit.

The ionization energy measures an element's ability to participate in chemical processes that call for the creation of ions or the donation of electrons. It is often connected to the type of chemical bonds that exist between the components in the compounds they form. See also electron affinity and binding energy.

To know more about Atom please click here ; https://brainly.com/question/6258301

#SPJ4

Please update the contract in accordance with the provided information so that it can be sent to the vice chairman.

The pace at which electrons pass a certain point in a fully functional electrical circuit is referred to as rate. Fundamentally, current is the same as flow. The ampere (AM-pir), also called to as an amp, is the standard measurement unit used throughout.

When describing how much electrical flows through a network and exactly how it flows inside of an integrated device, the term "electric current" is often employed. It is measured in amperes (A). The ampere number increases with the amount of flow of energy all across circuit.

To know more about Current visit:

https://brainly.com/question/23323183

#SPJ4

if the volume remains constant, what is the final pressure is 3.75ATM.

What is pressure?

pressure is continues physical force exerted on or against an object by something in contact with.

Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is the  distributed. Gauge pressure by this is the pressure which relative to the ambient by its  pressure. Various units are the  used to express pressure.

Applying gas law formulae:

P1/T1 = P2/T2

Where P1 = initial pressure (atm) = 7.5

T1 = initial temperature in Kelvin(K) = 448

P2 = final pressure (atm) = unknown

T2 = final temperature in Kelvin(K) = 224

From the above Formula make P2 the subject of formula

P2 = P1T2/T1

P2 = 7.50*224/448

P2 = 1680/448

P2 = 3.75ATM

To know more about pressure click-

https://brainly.com/question/25736513

#SPJ4

The abbreviation BESAFE was created to represent a number of hazards brought on by electrical mishaps.

Injuries are caused by a mix of: human factors, according to a theory known as The Haddon Matrix (external site). : agent, vehicle, and energy (for example, heat) environments—both natural and social.

Damage to your body results from injuries. It's a catch-all phrase for hurt brought on by mishaps, hits, falls, and other events as well as by the use of weapons. Millions of people suffer self-inflicted injuries each year in the United States. From slight to potentially fatal, these injuries range.

To know more about Injuries visit;

https://brainly.com/question/28450125

#SPJ4

The total energy contained in a given number of photons depends on the energy of each photon. The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength.

To find the energy of a photon with a given wavelength, you can use the formula E = h * c / lambda, where E is the energy of the photon, h is the Planck constant (6.62607015 x 10^-34 J*s), c is the speed of light (2.99792458 x 10^8 m/s), and lambda is the wavelength of the photon.

In this case, the wavelength of the photon is 0.00000187 m, so the energy of a single photon would be: E = 6.62607015 x 10^-34 J * s * 2.99792458 x 10^8 m/s / 0.00000187 m = 1.97639 x 10^-19 J.

If we have 1.00 moles of photons, each with an energy of 1.97639 x 10^-19 J, the total energy contained in the photons would be the number of photons times the energy of each photon. One mole of any substance contains 6.02214076 x 10^23 particles, so 1.00 moles of photons would contain 6.02214076 x 10^23 photons.

To find the total energy contained in 1.00 moles of photons with a wavelength of 0.00000187 m, we can multiply the number of photons by the energy of each photon: 6.02214076 x 10^23 photons * 1.97639 x 10^-19 J/photon = 1.1933 x 10^5 J.

To convert this to kJ, we can divide by 1000 to get 119.33 kJ. Rounded to three significant figures, the total energy contained in 1.00 moles of photons with a wavelength of 0.00000187 m would be 119 kJ.

Learn more about total energy:
https://brainly.com/question/25383334

#SPJ4

An air mass is a homogenous volume of air defined based on its temperature, and moisture characteristics.

An air mass is a volume of air whose temperature and humidity are specified. Many hundreds or thousands of square miles are covered by air masses, which adjust to the properties of the land underneath them. Latitude and their continental or marine source regions are used to categorize them.

When the atmosphere comes into touch with a sizable, uniform land or sea surface for a period of time long enough for it to absorb the surface's temperature and moisture characteristics, an air mass is created. Major air masses on Earth have their origins in polar or subtropical latitudes.

Thus, An air mass is a homogenous volume of air defined based on its temperature, and moisture characteristics.

To learn more about air mass, follow the link;

https://brainly.com/question/28709357

#SPJ1

The more potent acid in each pair is HNO3. nitric acid totally dissociates in its aqueous solution.

Ammonium nitrate, a crucial component of fertilizers, is created using nitric acid. Additionally, it is used to oxidize metals and to make explosives like trinitrotoluene (TNT) and nitroglycerin.

Nitric acid is created when water and nitrogen dioxide (NO2) react. Normally, the oxygen in the air reoxidizes the nitric oxide created by the process to create more nitrogen dioxide. Making almost pure nitric acid is possible by mixing sulfuric acid with a nitrate salt and heating the mixture in an oil bath.

To know more about nitric acid visit:-

https://brainly.com/question/26015251

#SPJ4