In a chiller economizer, the flash gas is usually used to precool the refrigerant before entering the evaporator. During this process, the liquid refrigerant is partially evaporated, causing a flash gas. The flash gas formed in a chiller economizer is used to pre-cool the refrigerant entering the evaporator and improve the cooling efficiency of the system.
Flash gas is a term used in refrigeration to describe the partial evaporation of a refrigerant when it passes through a pressure-reducing valve or an expansion valve. When the pressure of the refrigerant is reduced, a portion of it is converted to gas form. The term "flash" refers to the sudden vaporization of a liquid due to a sudden drop in pressure.
A chiller economizer is a refrigeration system component that takes advantage of cool outdoor air to improve the efficiency of an air-cooled chiller. A chiller economizer uses an outdoor air-cooled heat exchanger to cool the refrigerant before it enters the evaporator, which reduces the workload on the chiller compressor.
To learn more about "Economizer" visit: https://brainly.in/question/4216516
#SPJ11
A company runs ads pointing out that its products feature longer warranties than its competitor's products. The objective of the promotional strategy is to A) differentiate the product B) stabilize sales C) provide information D) accentuate the product's value 57. Persuasive advertising is used in the stages of the product life cycle. A) growth and introduction B) growth and maturity C) introduction and growth D) maturity and decline 58. Informative advertising is most apt to be used in which stage of the product life cyele? A) Maturity stage B) Growth stage C) Decline stage D) Introductory stage s9. Television is an attractive advertising medium because it A) is relatively inexpensive B) offers a rapidly growing network audience C) offers mass coverage and flexibility D) provides instant feedback which can be used to measure effectiveness 60. Marketers allocate the largest share of their consumer-oriented promotions to A) coupons B) samples C) rebates D) premiums 61, Samples are particularly useful in promoting A) concepts B) services C) new products D) expensive products
57. The objective of the promotional strategy is to differentiate the product.
58. Informative advertising is most apt to be used in the introductory stage of the product life cycle.
59. Television is an attractive advertising medium because it offers mass coverage and flexibility.
60. Marketers allocate the largest share of their consumer-oriented promotions to premiums.
61. Samples are particularly useful in promoting new products.
57. Differentiating the product is the objective of the promotional strategy because the company wants to highlight the longer warranties as a unique feature that sets their products apart from the competitor's products.
58. Informative advertising is commonly used in the introductory stage of the product life cycle to create awareness and educate consumers about the new product.
59. Television offers mass coverage and flexibility in terms of reaching a wide audience and tailoring advertisements to different target markets, making it an attractive advertising medium.
60. Marketers allocate the largest share of their consumer-oriented promotions to premiums, which are incentives or gifts given to customers as a reward for purchasing a product or taking a specific action.
61. Samples are particularly useful in promoting new products because they allow potential customers to try the product before making a purchase, increasing the likelihood of adoption and generating positive word-of-mouth.
Learn more about Informative advertising here:
https://brainly.com/question/32453543
#SPJ11
The supply function for oil is given on (in dollars) by S(q), and the demand function is given (in dollars) by D(q), S(q) = q^2 + 7q, D(q) = 1020 - 19q - q^2 Graph the supply and demand curves. Choose the correct graph. S(q) is the solid line, and D(q) is the dashed line. Find the point at which supply and demand are in equilibrium.
S(q) = q^2 + 7q, D(q) = 1020 - 19q - q^2; to graph the supply and demand curves, we'll need to substitute values of q in the given equations and then graph the values of the function on a coordinate plane.
The point at which supply and demand are in equilibrium is determined by the point of intersection of both the supply and demand curves. At this point, the price of oil will be in balance and the market will be stable. To find the point at which supply and demand are in equilibrium, we have to equate both S(q) and D(q) to find the value of q, which is the quantity demanded.
The supply and demand curves are shown below: Where the supply curve S(q) is shown in red color, and the demand curve D(q) is shown in blue color. It can be observed that the demand curve D(q) intersects the supply curve S(q) at q ≈ 16.66 which gives us the point of equilibrium.
To know more about demand curves visit:-
https://brainly.com/question/28951020
#SPJ11
influence over Willams. Nadal owns 15% and had significant influence in Marvin Ltd for the last nine years. Nadal Ltd does not have any share investments that confer control. Additional information for the current year, ended 31
Nadal Ltd purchased a 30% shareholding in Willams Ltd on 1 January 20X6. This purchase resulted in Nadal having significant influence over Willams. Nadal owns 15% and had significant influence in Marvin Ltd for the last nine years. Nadal Ltd does not have any share investments that confer control.
Additional information for the current year, ended 31 December 20X8:
During 20X8, Willams reported profit of $90,000. Dividend that Willams paid out of 20X8 profit amounted to $60,000.
During the year, Marvin Ltd sold inventory to Willams and made profit of $90,000. Half of this inventory was still held by Willams Ltd by year-end.
Required:
Prepare journal entries for Nadal Ltd to record the above events in 20X8 for its investment in Willams Ltd. Use the reclassification method to account for the profit and dividend that Nadal shares from Willams.
Nadal Ltd's journal entries for its investment in Willams Ltd in 20X8 include recording the purchase of shares, share of profit, payment of dividends, and reclassifying profit and dividend received.
Journal entries for Nadal Ltd's investment in Willams Ltd in 20X8:
1. Investment in Willams Dr. $210,000
Cash Cr. $210,000
(To record purchase of shares on Jan 1, 20X6)
2. Investment in Willams Dr. $13,500
Share of profit from Willams Cr. $13,500
(To record share of profit earned by Willams for year ended Dec 31, 20X8)
3. Cash Dr. $9,000
Investment in Willams Cr. $9,000
(To record payment of dividends by Willams on Dec 31, 20X8)
4. Investment in Willams Dr. $13,500
Retained earnings Cr. $13,500
(To reclassify share of profit earned by Nadal from its investment in Willams)
5. Cash Dr. $9,000
Investment in Willams Cr. $9,000
(To reclassify dividend received by Nadal from its investment in Willams)
Learn more about dividends here :-
https://brainly.com/question/30030205
#SPJ11
Suppose that an economy produces two goods, x, and y, using labor as the only input. The production function for good x is 1/3 x = Lx³ (where Lx is the quantity of labor used in x production) The production function for good y is 1/2 y=Ly Total labor available is constrained by Lx+Lx≤300 a. Construct the production possibility frontier in this economy f(x, y). b. Show the opportunity cost of good y in terms of good x. c. Use the implicit function theorem to calculate dy/dx.
To construct the production possibility frontier (PPF), we need to find the maximum combinations of goods x and y that can be produced given the labor constraint.
Given the production functions:
[tex]\[\frac{1}{3}x = Lx^3\][/tex]
[tex]\[\frac{1}{2}y = Ly\][/tex]
We can rewrite them in terms of labor inputs:
[tex]\[x = 3Lx^3\]\\\\\[x = 3Lx^3\][/tex]
[tex]\[y = 2Ly\][/tex]
Considering the labor constraint: [tex]\(Lx + Ly \leq 300\)[/tex] , we can substitute [tex]\(Lx = 300 - Ly\)[/tex] into the production functions to eliminate one variable:
[tex]\[x = 3(300 - Ly)^3\][/tex]
[tex]\[y = 2Ly\][/tex]
Now, we can plot the PPF on a graph where the x-axis represents the quantity of good [tex](\(x\))[/tex] and the y-axis represents the quantity of good [tex](\(y\))[/tex]. We vary the quantity of y from 0 to 300 and calculate the corresponding quantity of x using the production functions.
b. The opportunity cost of good y in terms of good x represents the amount of good x that needs to be given up to produce an additional unit of good y.
To calculate the opportunity cost, we can use the slope of the PPF. The slope is given by the ratio of the change in y to the change in x. Mathematically, it can be expressed as:
[tex]\[\text{Opportunity Cost of y in terms of x} = \frac{\Delta y}{\Delta x}\][/tex]
c. To calculate [tex]\(dy/dx\)[/tex] using the implicit function theorem, we can differentiate the production function for good y with respect to the production function for good x.
Differentiating the production functions:
[tex]\[dx = 3(300 - Ly)^2 \cdot d(Ly)\][/tex]
[tex]\[dy = 2 \cdot d(Ly)\][/tex]
Using the implicit function theorem, we can calculate [tex]\(dy/dx\)[/tex] as the negative ratio of the partial derivatives:
[tex]\[\frac{dy}{dx} = -\frac{d(y)}{d(x)}\][/tex]
Substituting the differentiated expressions:
[tex]\[\frac{dy}{dx} = -\frac{2 \cdot d(Ly)}{3(300 - Ly)^2 \cdot d(Ly)}\][/tex]
Simplifying the expression, we find the value of [tex]\(dy/dx\)[/tex] using the implicit function theorem.
To know more about function visit-
brainly.com/question/13771362
#SPJ11
If the price of a TV is $5000 (yes, it's one heck of a TV!) and the price of a laptop is $1300, then assuming that you have a budget of $6000, what is the opportunity cost of purchasing the TV? O a. 4 laptops and $800 saved Ob.4 laptops c. $1000 d. 1 laptop
The opportunity cost of purchasing the TV is $1000, option C.Hence, option (c) is correct.
Opportunity cost refers to the forgone alternatives. So, if the price of a TV is $5000 and the price of a laptop is $1300, then assuming that you have a budget of $6000, the opportunity cost of purchasing the TV can be calculated as follows:
Opportunity cost = Total budget - Cost of TV= $6000 - $5000= $1000
Therefore, the opportunity cost of purchasing the TV is $1000, option C.Hence, option (c) is correct.
To know more about purchasing visit:
https://brainly.com/question/31035675
#SPJ11
Imagine that you are the director of a major international lending institution supported by funds from member countries. What one area in newly industrialized and developing economies would be your priority for receiving development aid? Do you suspect that any member countries will be politically opposed to aid in this area? (Why or why not?)
As the director of a major international lending institution, determining the priority area for development aid in newly industrialized and developing economies,
would depend on various factors such as the specific needs and challenges faced by those economies, global development goals, and the institution's strategic objectives. However, a key area that often requires attention in many developing economies is infrastructure development.
Infrastructure plays a crucial role in economic growth and development. Improving transportation networks, energy systems, water and sanitation facilities, and communication technologies can have a transformative impact on these economies. By investing in infrastructure, developing countries can enhance productivity, attract investments, create jobs, and improve the quality of life for their citizens.
Infrastructure development is a multi-faceted undertaking that requires significant financial resources, technical expertise, and long-term planning. International development aid can support these efforts by providing financial assistance, technical assistance, and capacity building to help countries implement infrastructure projects effectively.
Regarding potential political opposition to aid in this area, it is possible that some member countries may have concerns or reservations for various reasons:
1. Domestic Priorities: Member countries may prioritize addressing domestic issues or allocating aid to other areas such as social welfare programs, education, healthcare, or climate change. They may argue that investing in their own infrastructure is a higher priority than providing aid to other countries.
2. Political Considerations: Some member countries may have geopolitical concerns or competing interests in specific regions. They might view development aid as a tool for advancing their own political or economic influence, and therefore, they may oppose aid to certain countries or regions that are not aligned with their interests.
3. Economic Interests: Member countries with strong industries or infrastructure companies may perceive development aid as potentially benefiting their competitors. They may be reluctant to support aid in infrastructure development if it leads to increased competition for their own industries.
4. Financial Constraints: Some member countries may face budgetary constraints or economic challenges themselves, which may limit their ability to contribute to development aid efforts.
5. Policy Differences: Member countries may have ideological or policy differences regarding the role of international institutions and the effectiveness of development aid. These differences can lead to opposition to aid in certain areas or for certain purposes.
It's crucial for the director of the international lending institution to engage in diplomatic negotiations, advocacy, and consensus-building among member countries to address potential opposition and ensure broad support for development aid in infrastructure or any other priority area.
The director should emphasize the benefits of infrastructure development for global economic growth, poverty reduction, and sustainable development, while considering and addressing the concerns and interests of member countries through open dialogue and collaboration.
learn more about economic growth here:brainly.com/question/29621837
#SPJ11
5- What is the main role of internal audit in a multinational corporation?
Assist external auditors to complete the audit of the financial statements in a timely manner
To ensure that employees comply with local customs and traditions
Ensuring that corporate policies and procedures are followed and evaluating operational efficiency
Prepare the consolidated financial statement of the corporation in accordance with international accounting standards
6- The factor used to convert from the currency of one country to the currency of another country is called:
Interest rate
capital cost
Exchange rate
exercise price
The main role of internal audit in a multinational corporation is to ensure that corporate policies and procedures are followed and to evaluate operational efficiency. Internal auditors are responsible for assessing the effectiveness of internal controls, identifying risks, and providing recommendations for improvement. They also help to ensure compliance with laws and regulations, assess financial reporting accuracy, and safeguard assets.
Regarding the options provided:
1. Assisting external auditors to complete the audit of the financial statements in a timely manner can be a part of the internal audit's responsibilities, but it is not their main role. Internal audit focuses on assessing internal controls and operational efficiency.
2. Ensuring that employees comply with local customs and traditions is generally not within the scope of internal audit. Internal audit primarily focuses on internal controls and risk management within the organization.
3. This option aligns with the main role of internal audit in a multinational corporation. They are responsible for ensuring that corporate policies and procedures are followed and evaluating operational efficiency.
4. Preparing the consolidated financial statements of the corporation in accordance with international accounting standards is usually the responsibility of the finance or accounting department, specifically the financial reporting team. Internal audit may review and assess the accuracy and reliability of financial information but is not primarily responsible for preparing consolidated financial statements.
Regarding the last question:
The factor used to convert from the currency of one country to the currency of another country is called the exchange rate. The exchange rate determines the value of one currency relative to another and is used in international trade, foreign exchange markets, and financial transactions between different countries.
Learn more about internal audit here:
https://brainly.com/question/31441741
#SPJ11
b. Maxy Corp. considers a project in a new line of business which has no debt and an equity cost of capital of 14%. Suppose that the firm decides to increase the project’s leverage and to maintain the project’s market debt-to-value ratio of 1/2. The project's debt cost of capital is 8% and its marginal tax rate is 21%. Assume that the project's unlevered cost of capital remains constant, i.e. 14%.
i. What will the project’s effective after-tax WACC be with the addition of leverage? [2 marks]
ii. What does the value of the project increase by for every $1 in new permanent debt that the firm issues to finance the project? Explain. [2 marks]
i.) The project's effective after-tax WACC with the addition of leverage is 10.16%.
ii.) For every $1 in new permanent debt issued, the value of the project increases by $0.168. This is because the firm can deduct the interest expense from its taxable income, leading to tax savings and an increase in the project's overall value.
i. To calculate the project's effective after-tax weighted average cost of capital (WACC) with the addition of leverage, we need to consider the cost of equity, cost of debt, and the market debt-to-value ratio.
Cost of Equity:
The equity cost of capital is given as 14%.
Cost of Debt:
The debt cost of capital is 8%.
Market Debt-to-Value Ratio:
The market debt-to-value ratio is 1/2.
Marginal Tax Rate:
The marginal tax rate is 21%.
Effective After-Tax WACC:
The effective after-tax WACC can be calculated using the following formula:
Effective After-Tax WACC = (Cost of Equity * Equity Proportion) + (After-Tax Cost of Debt * Debt Proportion)
Equity Proportion = 1 - Market Debt-to-Value Ratio
Debt Proportion = Market Debt-to-Value Ratio
After-Tax Cost of Debt = Debt Cost of Capital * (1 - Marginal Tax Rate)
Plugging in the values, we get:
Equity Proportion = 1 - 1/2 = 1/2
Debt Proportion = 1/2
After-Tax Cost of Debt = 8% * (1 - 21%) = 8% * 79% = 6.32%
Effective After-Tax WACC = (14% * 1/2) + (6.32% * 1/2) = 7% + 3.16% = 10.16%
Therefore, the project's effective after-tax WACC with the addition of leverage is 10.16%.
ii. The value of the project increases by the amount of the interest tax shield for every $1 in new permanent debt issued to finance the project. This is because the interest tax shield represents the tax savings resulting from the tax-deductibility of interest payments on debt.
The interest tax shield can be calculated using the formula:
Interest Tax Shield = Debt * Interest Rate * Tax Rate
As the project's debt cost of capital is 8% and the marginal tax rate is 21%, the interest tax shield would be:
Interest Tax Shield = $1 * 8% * 21% = $0.168
Learn more about debt issued here :-
https://brainly.com/question/31167198
#SPJ11
The Consumer Price Index is reported monthly by the U.S. Bureau of Labor Statistics. It reports the change in prices for a market basket of goods from one period to another. The index for 2000 was 195.5. By 2015, it increased to 297.0.
What was the geometric mean annual increase for the period? (Round your answer to 2 decimal places.)
question: geometric mean is:____%
To calculate the geometric mean annual increase, we need to use the formula:
Geometric mean annual increase = [(Index at the end of the period / Index at the start of the period)^(1 / Number of years)] - 1
Given that the index for 2000 was 195.5 and the index for 2015 was 297.0, and the period is 15 years, we can substitute these values into the formula:
Geometric mean annual increase = [(297.0 / 195.5)^(1 / 15)] - 1
Calculating this expression will give us the geometric mean annual increase.
Geometric mean annual increase = [(297.0 / 195.5)^(1 / 15)] - 1
≈ 0.0259 - 1
≈ -0.9741
Rounded to two decimal places, the geometric mean annual increase for the period is approximately -97.41%.
To know more about geometric mean click this link -
brainly.com/question/29012256
#SPJ11
You borrow $1,500 and sign a contract that you will pay 7.8% interest rate. The inflation rate over the year ends up at 5.1%. This means that you real interest rate ends up being:
Give your answer with one decimal, even if that decimal is a "0." I.e. 10% = 10.0 with no % sign.
If the answer is negative, make sure you add the minus sign, so negative 10% = -10.0
Your Answer
To calculate the real interest rate, we need to account for the inflation rate. The real interest rate represents the actual return on an investment or the cost of borrowing, adjusted for inflation. In this case, the nominal interest rate is 7.8%, and the inflation rate is 5.1%.
The formula to calculate the real interest rate is:
Real Interest Rate = Nominal Interest Rate - Inflation Rate
Plugging in the values from the given information:
Real Interest Rate = 7.8% - 5.1% = 2.7%
Therefore, the real interest rate is 2.7%.
This means that after accounting for inflation, the effective interest rate you are paying or receiving on the borrowed money is 2.7%. The real interest rate takes into consideration the erosion of purchasing power caused by inflation. In this case, you are paying a 7.8% nominal interest rate, but due to the 5.1% inflation rate, the actual return or cost of borrowing is reduced to 2.7%. It's important to consider the real interest rate to understand the true impact of inflation on your finances.
To know more about inflation rate click this link-
https://brainly.com/question/19263433
#SPJ11
What is the present value of an investment with the following cash flows?
Year 1 $14,000
Year 2 $20, 000
Year 3 $30,000
Year 4. $ 43,000
Year 5. $ 57,000
Use a 7% discount rate, and round your answer to the nearest $1.
a. $128, 487
b. $107, 328
c. $112, 346
d. $ 153, 272
Expert Answer
The present value of an investment with the following cash flows is (c) $112, 346.
The present value (PV) of an investment with the given cash flows can be calculated using the discounted cash flow (DCF) method. The DCF formula is:
PV = CF1 / (1+r)^1 + CF2 / (1+r)^2 + CF3 / (1+r)^3 + CF4 / (1+r)^4 + CF5 / (1+r)^5
Where CFs are the cash flows in each period (year) and r is the discount rate.
In this case, we have CFs of $14,000, $20,000, $30,000, $43,000 and $57,000, and the discount rate is 7%.
Substituting these values in the DCF formula, we get:
PV = $14,000 / (1+0.07)^1 + $20,000 / (1+0.07)^2 + $30,000 / (1+0.07)^3 + $43,000 / (1+0.07)^4 + $57,000 / (1+0.07)^5
Solving this equation, we get the PV to be approximately $112,346, rounded to the nearest dollar. Therefore, the answer is c. $112,346.
It's important to note that the DCF method assumes that the cash flows are certain and that the discount rate accurately reflects the time value of money. Any changes in either of these factors could affect the calculated PV. Therefore, it's important to carefully consider the limitations and assumptions of the DCF method before using it to evaluate investments.
for more such questions on investment
https://brainly.com/question/29547577
#SPJ8
find the average variable cost for producing 34 sneakers. round your answer to the nearest hundredth.
To find the average variable cost for producing 34 sneakers, we need to know the total variable cost and divide it by the quantity of sneakers produced.
Since the question does not provide information on the total variable cost, we cannot calculate the average variable cost accurately. The variable cost per unit is needed to compute the average variable cost.
However, if you have the information on the total variable cost, you can divide it by the quantity of sneakers (34) to find the average variable cost per unit.
For example, if the total variable cost for producing 34 sneakers is $1,500, the average variable cost per unit would be calculated as follows:
Average Variable Cost per Unit = Total Variable Cost / Quantity
Average Variable Cost per Unit = $1,500 / 34
Average Variable Cost per Unit ≈ $44.12 (rounded to the nearest hundredth)
Please provide the total variable cost to obtain an accurate calculation of the average variable cost for producing 34 sneakers.
Learn more about sneakers here
https://brainly.com/question/28312887
#SPJ11
Which of the following is not considered a prevention cost?
Equipment maintenance costs.
Quality training costs.
Test and inspection costs.
Information system costs.
Supplier assurance costs.
2. Which of the following is a key determinant of productivity?
Change in process.
Low costs.
Control of waste.
Increased demand.
High revenues.
3. What is design failure?
An overall measure of quality is the difference between customer expectations and actual performance of the product or service.
Customer satisfaction with the total experience of a product or service.
The extent to which the actual performance of the product matches (or is consistent with) design specifications of the product.
Costs related to meeting customer demands and quality-related expectations.
The difference between the actual features of the product (or service) and the features that the customer wants.
The following information for the past year is available from Gas Company, a company that uses machine hours to apply standard factory overhead cost to outputs:
Actual total factory overhead cost incurred $ 28,000
Actual fixed overhead cost incurred $ 11,000
Budgeted fixed overhead cost $ 10,000
Actual machine hours 7,000
Standard machine hours allowed for the units manufactured 4,700
Denominator volume—machine hours 7,500
Standard variable overhead rate per machine hour $ 3
4. The variable factory overhead efficiency variance is:
$7,300 favorable.
$6,900 unfavorable.
$8,400 favorable.
$7,800 favorable.
$7,700 unfavorable.
Supplier assurance costs is not considered a prevention cost. Prevention costs are all costs incurred in the design, implementation, and maintenance of a quality management system to reduce the occurrence of defects. Increased demand is a key determinant of productivity.
Productivity is the ratio of output to input. It is measured by dividing the amount of goods or services produced by the amount of resources, such as labor, capital, and materials, used to produce them. Increased demand means more goods or services are produced with the same amount of resources.
The variable factory overhead efficiency variance is $6,900 unfavorable.Variable factory overhead efficiency variance= Standard variable overhead rate per machine hour (Actual machine hours - Standard machine hours allowed for the units manufactured)Standard variable overhead rate per machine hour = $3Actual machine hours = 7,000Standard machine hours allowed for the units manufactured = 4,700Variable factory overhead efficiency variance= $3(7,000 - 4,700) = $6,900 unfavorable.
To know more about productivity visit:-
https://brainly.com/question/30333196
#SPJ11
Listed below are certain accounts of the IE Manufacturing Corporation with balances for the year ended December 31, 2021: Supplies expense - administrative office Php10,300 Depreciation---plant and equipment 32,750 Depreciation---administrative office 3,500 Direct labor cost 320,207 Transportation Expenses - administrative office 3,000 Factory heat, light, and power 93,450 Factory supplies cost 12,500 Finished goods inventory, 1/1 65,780 Finished goods inventory, 12/31 106,750 Freight-in 9,890 Goods in process inventory, 1/1 25,000 Goods in process inventory, 12/31 21,920 Indirect labor 4,600 Insurance and taxes (factory) 15,620 Purchases 206,000 Raw materials inventory, 1/1 265,650 Raw materials inventory, 12/31 126,300 Salaries expense - administrative officers 40,500 Additional Information: 1. A total of 15,000 units were completed during the year. 2. 50,000 units were sold for Php21.75 each. Requirements: 1. Prepare a detailed cost of goods manufactured and sold statement for the year ended December 31, 2021 . 2. Prepare an income statement for the year ended December 31, 2021 3. Compute for the unit cost of goods manufactured (5 pts.).
Additional Information:1. A total of 15,000 units were completed during the year.2. 50,000 units were sold for Php21.75 each.We have to calculate the cost of goods manufactured and sold statement for IE Manufacturing Corporation for the year ended December 31, 2021.
Direct Material:Raw materials inventory, 1/1 - Php265,650Purchases - Php206,000Raw materials available for use - Php471,650Less Raw materials inventory, 12/31 - Php126,300Direct materials used in production - Php345,350Direct Labor:Direct labor cost - Php320,207Factory Overhead:Factory heat, light, and power - Php93,450Factory supplies cost - Php12,500Indirect labor - Php4,600Depreciation---plant and equipment - Php32,750Depreciation---administrative office - Php3,500Total Manufacturing Overhead - Php146,800 Goods available for sale - Php903,137Less Finished goods inventory, 12/31 - Php106,750Cost of goods sold - Php796,387Unit Cost of Goods Manufactured
The unit cost of goods manufactured is calculated as follows:Unit Cost of Goods Manufactured = Cost of Goods Manufactured ÷ Number of Units ProducedUnit Cost of Goods Manufactured = Php837,357 ÷ 15,000 unitsUnit Cost of Goods Manufactured = Php55.82 per unitIncome Statement for IE Manufacturing Corporation for the year ended December 31, 2021:Sales (50,000 units × Php21.75 each) - Php1,087,500Cost of goods sold - Php796,387Gross Profit - Php291,113Operating Expenses:Supplies expense - administrative office - Php10,300Transportation expenses - administrative office - Php3,000Insurance and taxes (factory) - Php15,620 Depreciation.
To know more about goods manufactured visit :
https://brainly.com/question/28434717
#SPJ11
D Becky sperus $10 to order a medium pizza.
Question 13 Which of the following statements describe a competitive market? Government does not intervene in any way. The number of sellers is limited to a select few. There is a large number of buyers and sellers.
Competitive Market is a type of market in which there is a large number of buyers and sellers. The government does not intervene in any way. Therefore, the correct statement that describes a competitive market is: "There is a large number of buyers and sellers."
:A competitive market is a market in which many firms sell similar products. Buyers and sellers are both price takers. The firms in a competitive market must follow the price set by the market forces of demand and supply. There is no single firm or group of firms that has the power to influence the price of the product.The government does not intervene in any way in a competitive market.
In contrast, it intervenes in the case of a monopolistic market. The government may intervene in the monopolistic market to regulate the price of goods and services, or to prevent monopoly power.The statement "The number of sellers is limited to a select few" does not describe a competitive market because a large number of sellers characterizes a competitive market. Therefore, this statement is false. The statement "Government does not intervene in any way" is not an exclusive description of a competitive market because the government can also not intervene in some monopolistic markets. Therefore, this statement is also false. The correct statement that describes a competitive market is: "There is a large number of buyers and sellers."
To know more about Market visit:
https://brainly.com/question/14418904
#SPJ11
Find the future values of the following ordinary annuities: a. FV of $800 paid each 6 months for 5 years at a nominal rate of 11% compounded semiannually. Do not round intermediate calculations. Round your answer to the nearest cent $ b. FV of $400 paid each 3 months for 5 years at a nominal rate of 11% compounded quarterly. Do not round intermediate calculations. Round your answer to the nearest cent S c. These annuities receive the same amount of cash during the 5-year period and earn interest at the same nominal rate, yet the annuity in part b ends up larger than the one in part a. Why does this occur?
a) Calculation of future value of $800 paid each 6 months for 5 years at a nominal rate of 11% compounded semiannually.FV = PMT ((1 + r / n)^(nt) - 1) / (r/n)PMT = $800r = 11% per annum = 2 (semi-annual) for 5 years = 10 t = n = 10FV = $800 ((1 + 0.11 / 2)^(2*10) - 1) / (0.11/2) = $20,246.17.
Therefore, the future value of $800 paid each 6 months for 5 years at a nominal rate of 11% compounded semi-annually is $20,246.17. b) Calculation of future value of $400 paid each 3 months for 5 years at a nominal rate of 11% compounded quarterly.FV = PMT ((1 + r / n)^(nt) - 1) / (r/n)PMT = $400r = 11% per annum = 4 (quarterly) for 5 years = 20 t = n = 20FV = $400 ((1 + 0.11 / 4)^(4*20) - 1) / (0.11/4) = $20,938.51Therefore, the future value of $400 paid each 3 months for 5 years at a nominal rate of 11% compounded quarterly is $20,938.51.
C) The reason the annuity in part b ends up larger than the one in part A is that the compounding frequency is greater in part b than in part A. The interest earned in part b is compounded four times a year, whereas, in part a, it is compounded two times a year. As a result, the future value of the annuity with quarterly compounding is higher than that with semi-annual compounding, even though the annuity amounts are the same.
To learn more about nominal rate, visit here
https://brainly.com/question/31580933
#SPJ11
Explain what an analytical report is and how it differs from an
informational report. Then list three categories of analytical
reports, describe each and give an original example of each.
An analytical report is a document that provides an analysis, interpretation, and explanation of data or information. It includes a clear statement of the problem, research or analysis of the problem, and evidence to support the findings. On the other hand, an informational report is a document that provides information on a specific subject or topic.
Analytical report vs. Informational report
An analytical report differs from an informational report in that it does not just provide information but also goes further to analyze and interpret the data to make conclusions or recommendations. An informational report, on the other hand, simply presents facts and information on a subject without analyzing it.
Categories of Analytical Reports
Three categories of analytical reports include feasibility reports, investigative reports, and recommendation reports.
1. Feasibility Reports
Feasibility reports assess the practicality of a proposed solution or project. It typically includes the problem, the objectives, alternatives to the proposed solution, a cost-benefit analysis, and recommendations. Example: A feasibility report can be written to assess the practicality of opening a new branch of a business in a new location.
2. Investigative Reports
Investigative reports are used to investigate and analyze a problem, situation, or occurrence. It provides detailed information on the investigation, the results, and conclusions or recommendations. Example: A workplace investigation report can be written to investigate claims of harassment in a workplace.
3. Recommendation Reports
Recommendation reports provide recommendations on actions to be taken to solve a problem or issue. It includes a summary of the problem, an analysis of alternatives, and a recommendation with supporting evidence. Example: A recommendation report can be written to provide recommendations on reducing the carbon footprint of a business.
To know more about report visit:
https://brainly.com/question/32669610
#SPJ11
What is meant by Asymmetric Information in contract design? If agents are boundedly self- interested (i.e., they have social preferences), instead of self-interested, what would happen to the volume of information rent and why? Explain with an example
Asymmetric information in contract design refers to a situation where one party in a transaction has more information or knowledge than the other party. This information asymmetry can lead to inefficiencies and challenges in designing contracts that effectively align the interests of both parties.
When agents are boundedly self-interested, meaning they have social preferences and consider the welfare of others in addition to their own, it can have implications for the volume of information rent. Information rent refers to the economic benefits that a party can gain by possessing and leveraging superior information.
In the presence of boundedly self-interested agents, the volume of information rent may decrease compared to situations with purely self-interested agents. This is because boundedly self-interested agents are more likely to share information, cooperate, and engage in mutually beneficial exchanges that enhance overall welfare.
For example, let's consider a situation where a company is hiring a manager for a specific project. The company knows that the success of the project depends on the manager's expertise and knowledge of a particular technology. However, the manager may possess private information about their true level of expertise.
If both the company and the manager are purely self-interested, the manager may have an incentive to exaggerate their expertise to negotiate a higher salary. In this case, there is a risk of adverse selection, where the company ends up hiring a manager who is not as competent as claimed.
On the other hand, if the manager has social preferences and cares about the overall success of the project, they may be more inclined to provide accurate information about their expertise. They understand that misrepresentation could harm the project and ultimately their reputation. In this scenario, the company can make a more informed hiring decision, and the volume of information rent, i.e., the economic benefit gained by the manager from asymmetric information, is likely to be lower.
Boundedly self-interested agents are more likely to engage in cooperation, information sharing, and building trust, which can mitigate the adverse effects of asymmetric information. This, in turn, reduces the potential for large information rents and leads to more efficient contract design and outcomes.
To learn more about Asymmetric information, visit
brainly.com/question/29508264
#SPJ11
What are the approaches companies use in implementing quality control policies
Companies implement quality control policies through approaches such as Total Quality Management, Six Sigma, Lean Manufacturing, ISO certification, and Quality Circles. These approaches promote a systematic and proactive approach to quality. Some common approaches include:
1. Total Quality Management (TQM): TQM is a comprehensive approach that focuses on involving all employees in continuous quality improvement. It emphasizes customer satisfaction, employee involvement, process improvement, and the use of data-driven decision making.
2. Six Sigma: Six Sigma is a data-driven approach aimed at reducing defects and variations in processes. It uses statistical analysis and methodologies to identify and eliminate errors, ultimately striving for near-perfect quality levels.
3. Lean Manufacturing: Lean principles focus on eliminating waste and maximizing value in processes. It aims to streamline operations, reduce lead times, and improve efficiency by eliminating non-value-added activities.
4. ISO Certification: Many companies adopt internationally recognized ISO standards (e.g., ISO 9001) to ensure consistent quality and customer satisfaction. These standards provide a framework for implementing quality management systems and continuous improvement.
5. Quality Circles: Quality circles involve small groups of employees who come together to identify and solve quality-related problems. They encourage employee engagement and collaboration, allowing for the sharing of knowledge and ideas to improve quality.
Learn more about ”ISO standards” here:
brainly.com/question/32087410
#SPJ11
Mint Ltd. owns 35% of Forest Corp., and has significant influence over Forest. During the calendar year 2021, Forest reported net income of $ 300,000 and paid dividends of $30,000. Mint mistakenly recorded these transactions using the cost method rather than the equity method of accounting. What effect would this have on Mint's investment account, net income, and retained earnings, respectively? understate, overstate, overstate overstate, understate, understate understate, understate, understate overstate, overstate, overstate.
Mint Ltd. is a company that owns 35% of Forest Corp., which means that Mint has significant influence over Forest. However, in the calendar year 2021, Mint mistakenly recorded the transactions using the cost method instead of the equity method of accounting.
How would this mistake affect Mint's investment account, net income, and retained earnings?The equity method and the cost method are the two methods of accounting for investments in which the investor has significant influence over the investee. The equity method is used to account for investments when the investor has significant influence, while the cost method is used when the investor has no significant influence over the investee.In this scenario, Mint Ltd.
recorded the transactions using the cost method instead of the equity method. This would result in the following effects:Investment account: UnderstatedThe investment account would be understated because the cost method does not recognize any changes in the fair value of the investment.
By not recording the dividends as a reduction in its investment, Mint Ltd. overstated its investment balance, which in turn overstated its retained earnings balance.Therefore, the effect of recording transactions using the cost method instead of the equity method of accounting is that the investment account is understated, while net income and retained earnings are overstated. The correct sequence of effects is overstate, understate, understate.
To know more about company visit:
https://brainly.com/question/30532251
#SPJ11
Question 3 If X = 125,0 = 24 and n = 36, construct a 99% confidence interval estimate for the population mean, the
The 99% confidence interval estimate for the population mean is (125 - 17.34) to (125 + 17.34) i.e. 107.66 to 142.34.
Given:X = 125; 0 = 24; n = 36;Confidence level = 99%As we know that confidence interval formula is given as;
CI = X ± z (s/√n)
Here, X = sample mean = 125
s = sample standard deviation = 24
n = sample size = 36
Confidence level = 99%
So, the level of significance (α) = 1 - 0.99 = 0.01 or α/2 = 0.005 (as this is two-tailed test)
Thus, the z-score for 0.005 in each tail is calculated as; `z0.005 = 2.575`
Now, the confidence interval for the population means is given as:
CI = X ± z (s/√n)CI
= 125 ± 2.575 (24/√36)CI
= 125 ± 17.34
Hence, the 99% confidence interval estimate for the population mean is (125 - 17.34) to (125 + 17.34) i.e. 107.66 to 142.34.
Know more about 99% confidence interval here:
https://brainly.com/question/17097944
#SPJ11
Sheila worked as a executive assistant in office of a law firm operated by Attorney Doug Jones. She suggested that the law firm become involved in class action litigation involving a major drug company. Attorney Jones agreed to become engaged in the cases as she had suggested. The law firm earned millions of dollars in attorney fees. Attorney Jones promised Sheila that she would receive a bonus because of her efforts and hard work. Sheila, her husband, and Attorney Jones met to discuss the terms of the bonus. Attorney Jones orally promised to pay Sheila a $500,000 bonus in 18 monthly installments. The promise was not in writing. Unknown to the attorney, Sheila had secretly tape-recorded the meeting. After paying Sheila $28,000, Attorney Jones stopped making the bonus payments. Sheila filed a lawsuit against Attorney Jones to enforce the promise he made to pay the bonus. Who wins this case? Be sure to fully explain your response.
In this given case, it seems that Sheila will be the winner. The reason is that Sheila worked as an executive assistant in the law firm operated by Attorney Doug Jones. She suggested the law firm become involved in class action litigation involving a major drug company.
The attorney Jones agreed to become engaged in the cases as she had suggested and the law firm earned millions of dollars in attorney fees. In recognition of her efforts and hard work, Attorney Jones promised Sheila a bonus.Sheila, her husband, and Attorney Jones met to discuss the terms of the bonus. Attorney Jones orally promised to pay Sheila a $500,000 bonus in 18 monthly installments. The promise was not in writing. Unknown to the attorney, Sheila had secretly tape-recorded the meeting. After paying Sheila $28,000, Attorney Jones stopped making the bonus payments.Sheila filed a lawsuit against Attorney Jones to enforce the promise he made to pay the bonus. Although the promise of paying the bonus was not in writing, the recording of the meeting can be taken as evidence that the promise was made. If the court feels that the recorded conversation was not altered, it can be taken as valid evidence. Moreover, Attorney Jones cannot deny making such a promise because he paid the first installment of $28,000. So, it can be concluded that Sheila will win this case as she has sufficient evidence to prove that Attorney Jones made the promise. Therefore, Attorney Jones will be held liable to pay the bonus promised to Sheila.
To know more about drug visit :
https://brainly.com/question/29767316
#SPJ11
Do you feel it is ethical to place conditions on property ownership? Why or why not?
The ethical implications of placing conditions on property ownership can be subjective, and opinions may vary on whether it is ethical or not.
The question of whether it is ethical to place conditions on property ownership depends on different perspectives and underlying values. Some argue that property owners should have the right to use and manage their property as they see fit, without external interference or restrictions. This perspective emphasizes individual freedom and property rights.
On the other hand, others argue that property ownership comes with certain responsibilities and obligations towards the greater good of society and the environment. They believe that placing conditions on property ownership, such as zoning restrictions or environmental regulations, is necessary to protect public welfare, ensure equitable land use, and preserve natural resources.
Ultimately, the ethical assessment of placing conditions on property ownership requires a balance between individual rights and societal interests. It involves considering the potential benefits and harms associated with such conditions, as well as the underlying principles of justice, fairness, and sustainability. Different ethical theories and frameworks may provide different perspectives on this matter, leading to diverse opinions on the ethicality of placing conditions on property ownership.
Learn more about ethical theories here:
https://brainly.com/question/30860866
#SPJ11
Two 10 year General Obligation bonds with the same maturity and credit rating are quoted on a 6.50 basis. One bond has a 7% coupon, while the other has an 8% coupon. If the quote is changed to 6.40%, which statement is TRUE?
Incorrect Answer A. The price of both bonds will change by the same percentage amount
Correct Answer B. The percentage change in price of the 7% bond will be more than the percentage change in price of the 8% bond
C. The percentage change in price of the 8% bond will be more than the percentage change in price of the 7% bond
D. No relationship exists between the price movements of the two bonds
The correct statement is B. The percentage change in price of the 7% bond will be more than the percentage change in price of the 8% bond. Option B.
When the bond quote changes from 6.50% to 6.40%, it implies that the market yield has decreased. Bond prices and yields have an inverse relationship, meaning that when yields decrease, bond prices increase.
Since the bonds have the same maturity and credit rating, the decrease in market yield will impact their prices differently based on their coupon rates. A bond with a lower coupon rate is more sensitive to changes in market yield compared to a bond with a higher coupon rate.
The 7% coupon bond has a lower coupon rate than the 8% coupon bond. Therefore, when the market yield decreases, the price of the 7% coupon bond will experience a larger percentage increase compared to the 8% coupon bond. This is because the lower coupon rate makes the 7% bond more valuable in a lower yield environment.
In contrast, the 8% coupon bond will have a smaller percentage increase in price because its higher coupon rate provides a higher fixed income stream, making it relatively less sensitive to changes in market yield.
Hence, the percentage change in price of the 7% bond will be more than the percentage change in price of the 8% bond when the bond quote changes from 6.50% to 6.40%. Option B is correct.
For more such question on bond. visit :
https://brainly.com/question/26712131
#SPJ8
5. Opportunity cost and production possibilities Juanita is a skilled toy maker who is able to produce both cars and kites. She has 8 hours a day to produce toys. The following table shows the daily output resulting from various possible combinations of her time. Hours Producing Produced Choice (Cars) (Kites) (Cars) (Kites) B 0 4 8 13 15 16 ABCDE А В С 6 4 2 D 2 4 6 8 3 2 1 On the following graph, use the blue points (circle symbol) to plot Juanita's initial production possibilities frontier (PPF). Intel PPF A New PPF 4 CARS Suppose Juanita is currently using combination D, producing one car per day. Her opportunity cost of producing a second car per day is per day. 1 Now, suppose Juanita is currently using combination C, producing two cars per day. Her opportunity cost of producing a third car per day is per day, 6 * B KITES a 0 2 G 3 Suppose Juanita is currently using combination D, producing one car per day. Her opportunity cost of producing a second car per day is per day. Now, suppose Juanita is currently using combination C, producing two cars per day. Her opportunity cost of producing a third bar per day is per day. From the previous analysis, you can determine that as Juanita increases her production of cars, her opportunity cost of producing one more car Suppose Juanita buys a new tool that enables her to produce twice as many cars per hour as before, but it doesn't affect her ability to produce kites Use the green paints (triangle symbol) to plot her new PPF on the previous graph It was previously Because she can now make more cars per hour, Juanita's opportunity cost of producing kites is
Opportunity cost and production possibilities Juanita's initial PPF (production possibilities frontier) is represented by the blue points on the graph shown above. If Juanita is currently producing 1 car per day by using combination D, her opportunity cost of producing a second car per day is 3 kites per day.
This is because the difference between D and B on the kite's axis is 3. Now, suppose Juanita is currently using combination C, producing two cars per day. Her opportunity cost of producing a third car per day is 6 kites per day. This is because the difference between C and A on the kites axis is 6. From the analysis, it is evident that as Juanita increases her production of cars, her opportunity cost of producing one more car is increasing. Suppose Juanita buys a new tool that enables her to produce twice as many cars per hour as before, but it doesn't affect her ability to produce kites. This would lead to the shifting of her PPF to the right (shown by the green triangle points on the graph). Since Juanita can now produce more cars per hour, her opportunity cost of producing kites is increasing. This is because the PPF curve is becoming steeper, meaning that in order to produce more cars, Juanita will have to give up more kites.
To know more about PPF visit:
https://brainly.com/question/29098353
#SPJ11
ESR 240/MGT 531: PRINCIPLES OF MANAGEMENT 1. Critically discuss the Motivational Theories of Management, highlighting how they can be used in an organization to enhance productivity. Give detailed highlights of the theories as content and process theories. (20%) GUIDE TO WRITING THE ASSIGNMENT 1. Use Times New Roman as font, and 12 as font size. Use 1½ line spacing. 2. 3. Acknowledge/reference the sources of material (i.e. inside text referencing) using the Harvard System of referencing. Failure to do so amounts to plagiarism. 4. The assignment should have an introduction and a conclusion. The main body should have meaningful sub-titles (sub-headings). 5. The assignment should have a minimum of ten (10) and a maximum of twelve (12) typed pages. 6. Use good English befitting a student pursuing a degree programme. This includes good grammar, correct spellings, punctuations, etc.
The principles of management are a set of guidelines used to direct and manage an organization's activities to achieve a defined goal. In any organization, motivation is a key factor that drives productivity.
The motivational theories of management explain why and how people behave in a certain way at work. Theories of motivation can be broadly classified into two categories: content theories and process theories.Content theories are concerned with what motivates employees, while process theories focus on how motivation occurs. Herzberg's two-factor theory and Maslow's hierarchy of needs theory are examples of content theories of motivation.
The theory of goal-setting, expectancy theory, and equity theory are examples of process theories of motivation.The two-factor theory states that satisfaction and dissatisfaction are not the opposite of each other. Instead, they exist as separate factors. Job satisfaction comes from intrinsic factors such as recognition, achievement, and personal growth, while dissatisfaction comes from extrinsic factors such as pay and working conditions. Therefore, to motivate employees, an organization should provide opportunities for personal growth and recognition.Maslow's hierarchy of needs theory is based on a hierarchy of needs that motivates human behavior.
These needs are arranged in a pyramid, with physiological needs at the base and self-actualization needs at the top. As a result, an organization should meet an employee's basic needs before moving on to higher-level needs such as self-actualization.The theory of goal-setting is based on the idea that people are motivated by specific goals. It explains that individuals who set specific, challenging goals for themselves and receive feedback on their performance are more likely to achieve their goals.Expectancy theory states that people are motivated by their expectations of what will happen as a result of their actions.
Thus, employees are more likely to be motivated if they believe that their efforts will lead to a desired outcome.Equity theory is based on the idea that people compare themselves to others to assess whether they are being treated fairly. This theory explains that employees are more likely to be motivated if they feel that they are being treated fairly in comparison to their peers.
In conclusion, motivation is a crucial factor in improving productivity in an organization. The motivational theories of management, such as content theories and process theories, provide insight into why and how people behave in a certain way at work. An organization can use these theories to identify the factors that motivate employees and create a work environment that enhances productivity.
To learn more about principles of management:
https://brainly.com/question/17528181
#SPJ11
identify how various health care stakeholders define quality
In the context of healthcare, quality can be defined as the degree to which health services meet the expectations and needs of patients, providers, and other stakeholders. The definition of quality is often influenced by various healthcare stakeholders such as patients, providers, payers, regulatory agencies, and policymakers.
Patients: Patients usually define quality in terms of their experience, outcomes, and access to care. For patients, quality healthcare means receiving care that is timely, safe, effective, efficient, patient-centered, and equitable. Providers: Providers define quality in terms of their ability to deliver evidence-based care that is consistent with current best practices. For providers, quality healthcare means using the latest technologies, adhering to best clinical practices, and providing care that is efficient, effective, and patient-centered.
To know more about effective refer :
https://brainly.com/question/6846873
#SPJ11
lassify each as one of the following: a. An operating activity b. Investing activity c. Financing activity d. Non-cash investing and financing activity 1. Bonds payable are converted into common stock 2. Merchandise is sold to customers for cash 3. Common stock is sold for cash above par value 4. Equipment is purchased using a 3 year, 10% note payable 5. 100 shares of Amazon common stock are purchased for cash 6. Land is sold for cash at book value 7. Cash dividend on common stock are declared and paid 8. Interest receivable on a short-term note receivable is collectec 9. Accounts payable are paid in cash
1. Bonds payable are converted into common stock - Non-cash investing and financing activity. 2. Merchandise is sold to customers for cash - Operating activity. 3. Common stock is sold for cash above par value - Financing activity. 4. Equipment is purchased using a 3-year, 10% note payable - Investing activity. 5. 100 shares of Amazon common stock are purchased for cash - Investing activity.
1. When bonds payable are converted into common stock, it is a non-cash investing and financing activity because it involves a conversion of a liability into equity without any cash flow. 2. Selling merchandise to customers for cash is an operating activity as it represents the core revenue-generating operation of the business. 3. Selling common stock for cash above par value is a financing activity as it involves raising funds by issuing equity shares. 4. Purchasing equipment using a note payable is an investing activity as it involves acquiring long-term assets. 5. Purchasing 100 shares of Amazon common stock for cash is an investing activity as it involves acquiring an ownership interest in another company.
Learn more about cash flows here:
https://brainly.com/question/27994727
#SPJ11
University of Florida football programs are printed 1 week prior to each home game. Attendance averages 60,000 screaming and loyal Gators fans, of whom two-thirds usually buy the program, following a normal distribution, for $5 each. Unsold programs are sent to a recvcling center that pays only 10 cents per program. The standard deviation is 10,000 programs, and the cost to print each program is $1. Refer to the for z-values. a) What is the cost of underestimating demand for each program? Cs =$4 (round your response to two decimal places). b) What is the overage cost per program? C0 =$.90 (round your response to two decimal places). c) How many programs should be ordered per game? programs should be ordered per game (round your response to the nearest whole number).
a) What is the cost of underestimating demand for each program? Cs =$4 Cost of underestimating demand per program = Underestimated demand * Cost per program.
Underestimated demand = z * standard deviation + mean - Demand= (z * 10,000) + 40,000 - 40,000(We subtract 40,000 from mean as the average attendance for a game is 60,000 and two-thirds of which buy the program, hence the demand = 40,000)Cs = Cost per program - Recycling revenue - Cost of underestimation= $1 - $0.10 - $4= -$3.1The cost of underestimating demand for each program is -$3.1.
b) What is the overage cost per program? C0 =$.90. Overage cost per program = Cost per program - Revenue from the sale of the program= $1 - $0.10 - $0.90= $0.90Therefore, the overage cost per program is $0.90.c) How many programs should be ordered per game? We can determine the number of programs to be ordered per game using the formula below: Underestimated demand = z * standard deviation + mean - Demand= (z * 10,000) + 40,000 - 40,000 = z * 10,000.
The total demand is two-thirds of the average attendance, which is60,000 * 2/3 = 40,000 programs.
To determine the z-value, we will use the standard normal distribution table. Z = (X - μ) / σZ = (40,000 - 40,000) / 10,000 = 0.
Therefore, no programs need to be ordered since the number of programs printed is equal to the demand. Hence, the number of programs that should be ordered per game is 40,000.
To know more about cost visit:
https://brainly.com/question/14566816
#SPJ11
The theoretical Phillips curve is given by Tlt = + (m+z) – aut a) This tells us that when people expect inflation to be high, actual inflation is also high. Appealing to the labor market, explain why this is the case. b) Suppose that m+z = 7.4% and a = 1.2. If people can accurately predict the inflation rate, what is the natural rate of unemployment? c) Suppose that the difference between actual inflation and expected inflation is 2% m+z = 2.8%, and a = 0.16. What is the natural rate of unemployment?
a) The higher prices of goods and services increase the demand for labor which reduces unemployment; b) The natural rate of unemployment is 3.36%;c)The natural rate of unemployment is 12.5%.
a) Phillips Curve theory represents a trade-off between the inflation rate and the unemployment rate. It suggests that when inflation rises, unemployment falls and when inflation falls, unemployment rises.
The relationship between inflation and unemployment is inversely related. The labor market can explain the relationship between inflation and unemployment. When inflation is high, wages increase, increasing the cost of production and, in turn, prices of goods and services.
b) To find the natural rate of unemployment, substitute the values of m+z and a in the formula.
Tlt = + (m+z) – aut Tlt = 7.4% – (1.2 * uN)
Where uN is the natural rate of unemployment. 7.4% – (1.2 * uN) = uN 7.4% = 2.2 uN
uN = 3.36%.
c) Natural rate of unemployment can be found by the equation;
Tlt = + (m+z) – aut m+z = 2.8% a = 0.16 Tlt = 0 + 2.8% – 0.16uN Tlt = 2.8% – 0.16uN 2% = 0.16uN
uN = 12.5%.
To know more about Phillips Curve visit:
https://brainly.com/question/32623271
#SPJ11
