what is a derived table? when is it used? can you describe any situations where you would have to use it over a subquery in the where clause?

Answer:

154.61 g.

Explanation:

he balanced chemical equation for the reaction of KCIO3 to form KCl and O2 is:

2KCIO3 -> 2KCl + 3O2

From this equation, we can see that for every 1 mole of KCIO3, 2 moles of KCl and 3 moles of O2 are produced.

First, we need to calculate the number of moles of KCIO3:

n = mass / molar mass

= 125g / (138.2 g/mol)

= 0.902 moles

Now that we have the number of moles of KCIO3, we can calculate the masses of the products:

Mass of KCl = 0.902 moles * (74.55 g/mol) = 67.53 g

Mass of O2 = 0.902 moles * (32.00 g/mol) * 3 = 87.08 g

So the total mass of the products will be:

67.53 g + 87.08 g = 154.61 g.


ALLEN

The most likely formula for the compound composed of element x and nitrogen is CX₄

Element X has a ground- state valence electron configuration of ns2np5

It'll partake one electron to complete its quintet. therefore, it'll form one covalent bond. C snippet shares 4 electrons to complete its quintet. Hence, C snippet forms 4 covalent bonds. therefore, one C snippet will combine with 4 X tittles. The formula of the carbon emulsion most likely to be formed is CX4.

An ionic compound is formed when two atoms combine and one atoms transfers electron to the other atom. Ionic bonds are usually formed between metals and nonmetals.

The element M has two valence electrons and has a valency of two while the element X has seven valence electrons and a valency of one. Hence, the formula of the ionic compound that would most likely result from the reaction between ions of M and X is MX₄.

Learn more about Electron configuration:

https://brainly.com/question/10407552

#SPJ4

The volume of hydrogen at STP is required to produce 25 g of ammonia is 37.5 g.

The balanced equation for the formation of ammonia is given as follows

N₂ + 3H₂ → 2NH₃

The stoichiometry of H₂ to NH₃ is 3 : 2.

Avagadros law states that "at volume of gas is proportional to number of moles of gas at constant pressure and temperature."

Therefore, the molar ratio is equivalent to volume ratio,

Hence, the volume ratio of H₂ to NH₃ is 3 : 2

It can be concluded that 2 L of NH₃ requires 3 L of H₂.

Then 25.g of NH₃ requires = 3/2 x 25 = 37.5 g of H₂

So, volume of H₂ required is 37.5 g.

Learn more about volume from the link given below.

https://brainly.com/question/27868083

#SPJ4

Answer:

H2O

Explanation:

Answer:

H2O

Explanation:

The chemical formula for water is H2O, meaning it is made up of 2 hydrogen atoms and 1 oxygen atom.

The adiabatically compressed system has the higher temperature at the end of the compression.

This is because, according to the ideal gas law, pressure and temperature are related by the equation:

PV^γ = constant

Where γ is the ratio of specific heat for the gas. Since the compression is adiabatic, no heat is added to the system and thus γ = 1.4 for most gases. Therefore, the pressure and temperature are related by:

[tex]\frac{P1}{T1} = \frac{P2}{T2}[/tex]

Since P1 and P2 are equal (10 bar) but T2 is greater than T1, it follows that T2 must be greater than T1. Therefore, the adiabatically compressed system has a higher temperature than the isothermally compressed system.

learn more about specific heat Refer:brainly.com/question/11297584

#SPJ4

The mass (in grams) of H₂ gas produced when 14.3 g of aluminum dissolves in the acid is 1.6 g

First, we shall determine the reacting mass of Al and the mass of H₂ produced from the balanced equation. This is shown below

2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g

From the balanced equation above,

54 g of Al reacted to produce 6 g of H₂

Finally, we shall determine the mass of H₂ produced when 14.3 g aluminum, Al dissolves. Details below:

From the balanced equation above,

54 g of Al reacted to produce 6 g of H₂

Therefore,

14.3 g of Al will react to produce = (14.3 × 6) / 54 = 1.6 g of H₂

Thus, the mass of H₂ produced is 1.6 g

Learn more about mass:

https://brainly.com/question/9526265

#SPJ1

Complete question:

Sulfuric acid dissolves aluminum metal according to the following reaction:

2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g)

Suppose you wanted to dissolve an aluminum block with a mass of 14.3g. How many grams of H₂ gas would be produced by the complete reaction of the aluminum block?

The oxidation number of the given elements in the compound is:

An element's oxidation number is the number assigned to it in a chemical combination. The number of electrons that atoms in a molecule can share, lose or gain while forming chemical connections with other atoms of a different element is known as the oxidation number.

The oxidation number of elements in the compounds is calculated as follows:

Mn in MnO₂: Mn + (-2 * 2) = 0

Mn - 4 = 0

Mn = +4

Mn in KMnO₄: Mn + (+1) + (-2 * 4) = 0

Mn - 7 = 0

Mn = +7

K in KBr: K + (-) = )

K - 1 = 0

K = + 1.

Learn more about oxidation number at: https://brainly.com/question/27239694

#SPJ1

According to the first law of thermodynamics, energy can be transferred from one system to another or transformed from one form to another, but it cannot be created or destroyed.

The first law of thermodynamics is also known as the law of conservation of energy. In short, the law states that the amount of energy is and will always be constant, as it can't be created or destroyed.

For example, when a car engine burns gasoline, the chemical energy in the gasoline is transformed into thermal energy (heat) and mechanical energy (motion). The total amount of energy in the system remains the same, but it is transformed into different forms.

Similarly, when you lift a weight, you transfer energy from your muscles to the weight, causing it to move. The total amount of energy in the system remains the same, but it is transferred from one object to another.

Learn more about conservation of energy at https://brainly.com/question/166559

#SPJ11

True. When diluting a strong acid, the acid should always be added slowly to the water with constant stirring, rather than adding water to the acid.

This is to prevent a sudden release of heat, which can cause the solution to boil or splash out of the container, potentially causing injury.When diluting a strong acid, it is important to add the acid to the water and not the other way around. This is because the process of dilution generates heat, and adding water to the acid can cause a rapid buildup of heat, potentially leading to boiling and splattering of the acid. By adding the acid to the water, the heat is more evenly distributed and the risk of splattering is reduced.
In addition, when adding an acid to water, the acid is gradually diluted, reducing the likelihood of a sudden and dangerous increase in the concentration of the acid. This is important to ensure the safety of those handling the acid.

Overall, the process of diluting a strong acid with water should be done with caution and care to ensure the safety of those involved.

Learn more about diluting strong acids here:

https://brainly.com/question/11082639

#SPJ4

By performing the following operation, the answer in scientific notation for 3.5 x 10⁷x 1.8×10[tex]^-3[/tex]×10 is 6.3×10⁵.

Scientific notation is defined as a way of expressing numbers which are too large or too small so that they can be easily written in decimal form. It can be referred to the scientific form or the scientific index form or even the standard form.

Base ten notation is used by scientists, engineers as it helps in simplification of arithmetic operations. It contains the significant figures which include all non-zero numbers , the zeroes between significant digits and zeroes which are needed to be significant.

Learn more about scientific notation,here:

https://brainly.com/question/13091583

#SPJ1

Answer:

It's option D

Explanation:

2.0 M K2SO4 will exhibit the greatest increase in boiling point compared to plain water.

Boiling point is the temperature at which a liquid changes into a gas. It is the temperature at which the vapor pressure of the liquid is equal to the atmospheric pressure. Boiling point is an important physical property of a substance and is dependent on the pressure applied to the liquid. Generally, the higher the pressure, the higher the boiling point of a liquid. For example, water boils at 100°C (212°F) at sea level, but at higher altitudes, where atmospheric pressure is lower, water boils at lower temperatures. The boiling point of a substance is also affected by the presence of other compounds in the liquid, such as impurities. Boiling point is an important property used to identify and characterize materials, and is typically measured with a thermometer.

To learn more about boiling point

https://brainly.com/question/40140

#SPJ1

The movement of a substance from a low concentration to a high concentration will require an input of energy in the form of heat or another form of energy.

This is because the movement of a substance from a low concentration to a high concentration is driven by the laws of thermodynamics, which state that energy flows from high concentration to low concentration, and not the other way around.

In a concentration gradient, particles tend to move from areas of high concentration to areas of low concentration, in a process known as diffusion. However, for this movement to occur spontaneously, the concentration gradient must be established, meaning that there must be a difference in concentration between the two areas.

To move a substance from a low concentration to a high concentration, energy must be supplied to the system to overcome the natural tendency for energy to flow from high to low concentration. This energy can be supplied in the form of heat, work, or other forms of energy, and it is used to move the particles against the concentration gradient, from a low concentration to a high concentration.

In conclusion, the movement of a substance from a low concentration to a high concentration requires an input of energy in the form of heat or another form of energy, to overcome the natural tendency for energy to flow from high to low concentration

Learn more about concentration here:

https://brainly.com/question/13872928

#SPJ4

An electrovalent or ionic bond is a type of chemical bond that occurs between two atoms when one or more electrons are transferred from one atom to another. This results in the formation of two ions with opposite charges that are attracted to each other by electrostatic forces, forming an ionic bond.

Typically, an ionic bond occurs between a metal and a nonmetal. The metal atom loses one or more electrons to become a positively charged ion or cation, while the nonmetal atom gains one or more electrons to become a negatively charged ion or anion. For example, in the formation of sodium chloride (NaCl), sodium donates an electron to chlorine, forming Na+ and Cl- ions that are attracted to each other to form an ionic bond.

Learn about ionic bond here https://brainly.com/question/957239

#SPJ1

Answer: Clarify your question please.

Explanation:

I'm sorry, but I need more context to determine the mean absolute deviation for "when any ice was present" and how to improve the men's deviation. Can you provide more details or clarify your question?

Free radicals are formed as a result of the process of d)oxidation. So,correct option is d.

Free radicals are unstable particles or atoms that are made by the body normally or by openness to toxins. They can harm DNA and cells by taking electrons from different particles, which might cause infections or indications of aging. The body's capacity to battle free revolutionaries diminishes with age, prompting more oxidative pressure and degeneration.

The answer would be d. (Oxidation), on the grounds that the metabolic pathway in which cells use proteins to oxidize supplements, subsequently delivering energy which is utilized to change ATP. In many eukaryotes, this happens inside mitochondria.

Practically all high-impact organic entities complete oxidative phosphorylation. This pathway is most likely so inescapable in light of the fact that it is a profoundly proficient approach to delivering energy, contrasted with elective maturation cycles like anaerobic glycolysis.

Hence,correct option is d.

To know more about free radicals,visit here:

https://brainly.com/question/29422803

#SPJ4

(Complete question) is:

Free radicals are formed as a result of the process of

a. glycolosis.

b. hydrolosis.

c. photosynthesis.

d. oxidation.

The bonding that involves the transfer of electrons to form cations and anions is known as ionic bonding.

Ionic bond, additionally known as electrovalent bond, form of linkage fashioned from the electrostatic appeal among oppositely charged ions in a chemical compound. Such a bond paperwork while the valence (outermost) electrons of 1 atom are transferred completely to some other atom. Ionic bonding is the entire switch of valence electron(s) among atoms. It is a form of chemical bond that generates oppositely charged ions. In ionic bonds, the steel loses electrons to emerge as a undoubtedly charged cation, while the nonmetal accepts the ones electrons to emerge as a negatively charged anion.

To learn more about ionic bond check the link below:

https://brainly.com/question/957239

#SPJ4

Liquids and solids have fixed volumes because their particles are packed tightly and have little free space to move around.

When pressure is applied, the particles in these materials are forced closer together, but because of their fixed positions, they cannot move closer to each other. The result is that the volume remains constant.

The behavior of liquids and solids is different from gases, which are compressible and have variable volumes that can change when pressure is applied. This is because the particles in a gas have much more free space to move around and can be easily compressed or expanded by pressure.

It is important to note that while the volume of a liquid or solid may not change when pressure is applied, the density of the material can change. Increasing pressure can cause the particles to become more closely packed, increasing the material's density.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ4

Answer:

the molar mass of CoCl2•6H2O is 238.05 g/mol.

Explanation:

The molar mass of CoCl2•6H2O can be calculated by adding the atomic masses of each element in the compound.

Here's the calculation:

Cobalt (Co): 58.93 g/mol

Chlorine (Cl): 35.45 g/mol (2 atoms) = 70.9 g/mol

Hydrogen (H): 1.01 g/mol (12 atoms) = 12.12 g/mol

Oxygen (O): 16.00 g/mol (6 atoms) = 96.00 g/mol

Therefore, the molar mass of CoCl2•6H2O is:

58.93 + 70.9 + 12.12 + 96.00 = 238.05 g/mol

So, the molar mass of CoCl2•6H2O is 238.05 g/mol.

This issue, which links the pressure, volume, and temperature of a gas, can be resolved using the combined gas law: [tex](P1 x V1) / T1 = (P2 x V2) / T2[/tex]. As a result, when the final volume is 2.84 L, the pressure in atmospheres is 3.07 atm.

The force applied per unit area is referred to as pressure, which is a key term in both engineering and physics. In other terms, pressure can be thought of as the amount of force that is applied to a specific location. It can be measured in a number of different units, such as atmospheres (atm), pascals (Pa), and pounds per square inch (psi). Many natural phenomena and technical applications, including fluid dynamics, weather systems, aviation, and hydraulics, depend heavily on pressure. Physics, chemistry, material science, and mechanical engineering are just a few of the science and engineering disciplines that depend on an understanding of pressure.

Learn more about  pressure here:

https://brainly.com/question/16649792

#SPJ4

The separation schemes considered in sections 10.1, 10.3-10.5, 11.1, and 11.2 of mohrig work "Quantitative Chemical Analysis" (which is commonly known as "Mohrig" after one of its co-authors).

Assuming that is the case, these sections likely cover various methods for separating and isolating components in a mixture, including techniques like extraction, chromatography, and distillation. Whether or not these methods will work depends on a variety of factors, such as the chemical properties of the components in the mixture, the separation schemes outlined in Mohrig are based on well-established principles and techniques that have been used successfully in many different contexts. So while I cannot provide a definitive answer without more specific information, it is likely that many of the separation schemes described in these sections will be effective for separating and isolating components in a mixture, provided that they are used correctly and in the appropriate circumstances.

Learn more about mohrig work  here:

https://brainly.com/question/28870413

#SPJ4

The brine a more effective de-ice solution than solid ice melt products the correct option is b. Since brine is a already a solution, the Van't Hoff Factor is higher than the solid salt, making the freezing point depression greater.

The Salt brine for the roads is the solution of the salt that is generally the sodium chloride and the water, and it will help to keep the roads safe and use as less salt. The brine is a already a solution, the Van't Hoff Factor is higher than the solid salt, forms the freezing point depression greater.

The Freezing point depression will requires the solution to occur. The Brine to starts the solution, where the solid salt will form the solution first.

To learn more about brine here

https://brainly.com/question/1493673

#SPJ4

Answer:

283.1g CaCl2

Explanation:

Use Molar Mass of CaCl2 and convert.

2.55molsCaCl2 x 111g/1mol = 283.1g CaCl2

Answer:

no answer

Explanation:

you can get the answer If you go back to your textbook

The element lithium has two naturally occurring isotopes. Lithium i.e. (Li) have a atomic mass of value 6.94 amu.

To calculate the atomic mass of lithium, we need to find the weighted average of the masses of its two isotopes based on their natural abundance. The formula for this calculation is:

[tex]Atomic mass = (mass of isotope 1 * abundance of isotope 1) + (mass of isotope 2 * abundance of isotope 2)[/tex]

Putting values for two isotopes of lithium:-

[tex]Atomic mass = (6.0151 amu * 0.0749) + (7.0160 amu * 0.9251)[/tex]

[tex]Atomic mass = 0.4497595 + 6.487676[/tex]

[tex]Atomic mass = 6.937435 amu[/tex]

Hence, the atomic mass of lithium is approx. 6.94 amu.

To know more about lithium please refer: https://brainly.com/question/3487113

#SPJ4

Answer:

D) 1:2

Explanation:

The combustion of butane in oxygen (air) is represented in the  balanced chemical equation as 2 C₄H₁₀ + 13 O₂[tex]\rightarrow[/tex] 8 CO₂ + 10 H₂O.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ9

Your question is incomplete but most probably your full question was:The combustion of butane in oxygen (air) is represented in the equation 2 C₄H₁₀ + 13 O₂[tex]\rightarrow[/tex]

In a trial, a 0.300 m solution of N[tex]_2[/tex]  had a new molarity of 0.156 after 500 seconds. Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].

The reaction rate or rate of reaction is the rate at which a chemical reaction occurs, defined as proportional to the rise in product concentration per unit time and the reduction in reactant concentration per unit time.

The speeds of reaction might vary greatly.

rate of formation of N[tex]_2[/tex] = change in concentration/ change in time

                                   =0 .300 - 0.156 /0- 500

                                     =0.15/500

                                      =0.0003mol /l× s

Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].

To learn more about rate of reaction, here:

https://brainly.com/question/8592296

#SPJ1

The 4% accuracy mentioned in the question was not specific to any particular measurement. It is a general assumption about the maximum amount of error that could be present in the measured ion-ion distances.

To predict the cation-anion distance using the values of ionic radii given in Figure 7.7, we can simply add the ionic radii of the cation and anion. The ionic radii for Li+, Na+, K+, and Rb+ are given in the figure as 0.76 Å, 1.02 Å, 1.38 Å, and 1.52 Å, respectively. The ionic radii for F-, Cl-, Br-, and I- are given as 1.19 Å, 1.81 Å, 1.96 Å, and 2.20 Å, respectively. Adding the appropriate cation and anion radii gives the following predicted cation-anion distances:

LiF: 0.76 Å + 1.19 Å = 1.95 Å

NaCl: 1.02 Å + 1.81 Å = 2.83 Å

KBr: 1.38 Å + 1.96 Å = 3.34 Å

RbI: 1.52 Å + 2.20 Å = 3.72 Å

To calculate the difference between the experimentally measured ion-ion distances and the ones predicted, we can subtract the predicted distance from the measured distance. The differences are:

LiF: 2.01 Å - 1.95 Å = 0.06 Å

NaCl: 2.82 Å - 2.83 Å = -0.01 Å

KBr: 3.30 Å - 3.34 Å = -0.04 Å

RbI: 3.67 Å - 3.72 Å = -0.05 Å

Assuming an accuracy of 0.04 Å in the measurement, we can say that the LiF and KBr values are within the margin of error, while the NaCl and RbI values are outside the margin of error. However, it is important to note that these differences are relatively small and may be attributed to experimental error.

Bonding atomic radii are typically used to estimate the size of the atom that forms a covalent bond. To estimate the cation-anion distance using bonding atomic radii, we can add the bonding atomic radii of the cation and anion. The bonding atomic radii for Li, Na, K, and Rb are 1.28 Å, 1.54 Å, 1.96 Å, and 2.11 Å, respectively. The bonding atomic radii for F, Cl, Br, and I are 0.71 Å, 0.99 Å, 1.14 Å, and 1.33 Å, respectively. Adding the appropriate cation and anion radii gives the following estimated cation-anion distances:

LiF: 1.28 Å + 0.71 Å = 1.99 Å

NaCl: 1.54 Å + 0.99 Å = 2.53 Å

KBr: 1.96 Å + 1.14 Å = 3.10 Å

RbI: 2.11 Å + 1.33 Å = 3.44 Å

Learn more about ionic compounds here: brainly.com/question/2687188

#SPJ4

While structural isomers share the same molecular formula, their atoms are bonded differently. Stereoisomers share the same atomic configurations and chemical formulae. Thus, option A is correct.

The term "structural isomer," also known as a "constitutional isomer," refers to a group of two or more organic compounds that share the same chemical formula but have different structures.

Isomers are compounds that share the same molecular formula but differ in the way their atoms or groupings are arranged or oriented.  Only the groups' spatial orientation within the molecule distinguishes them from one another.

The location of the methyl group varies between the two molecules below, despite having the same chemical formula.

Therefore, regioselective is the term that correctly describes a chemical reaction that favours one possible structural isomer over one or more other structural isomers.

Learn more about structural isomer here:

https://brainly.com/question/2005530

#SPJ1