The answer is Extranet it is an extension of an Intranet that allows authorized external users such as partners, vendors, or customers to access certain parts of the Intranet's content loaded with restricted access.
The extension of an Intranet that is available only to authorized outsiders is called an Extranet. This allows secure access for external users while maintaining the privacy and security of the Intranet. It grants authorized individuals outside of the company restricted access. It allows for private communication, sharing of documents and knowledge, and transfers between important external partners and an organization, much like the intranet does. Sharepoint is a good example of an extranet network. Businesses use an extranet, a private network, to grant trusted third parties, such as partners, customers, suppliers, and other businesses, secure, controlled access to business operations or information.
learn more about the extranet
https://brainly.com/question/15420829
#SPJ11
The correct answer is extranet, which is an intranet extension that enables authorised external users, such as partners, vendors, or customers, to access some of the intranet's material that is protected by limited access.
An Extranet is the portion of an Intranet that is only accessible to authorized outsiders. This keeps the Intranet private and safe while enabling secure access for outside users. Restricted access is made available to authorised third parties outside the company. Similar to the intranet, it enables confidential communication, knowledge sharing, and transfers between significant external partners and an organisation. A nice illustration of an extranet network is Sharepoint.
To learn more about the extranet visit;
brainly.com/question/15420829
#SPJ11
A byte consists of exactly two bits.
a. True
b. False
Answer: False
Explanation:
Byte consists of exactly eight bits
Identify a topology used by traditional mainframe networks.Select one:a. A star topologyb. A ring topologyc. A hierarchical topologyd. A mesh topology
A hierarchical topology is organized in a tree-like structure with a central mainframe computer connected to various lower-level computers, which in turn are connected to even lower-level devices. This structure allows for efficient management and communication within the network.
The topology used by traditional mainframe networks is typically a hierarchical topology. This topology features a central mainframe system with smaller subsystems branching off of it. This allows for content to be loaded and distributed efficiently throughout the network. It is a star network in which the primary networking device is connected to an additional networking device. As a tree-like convergent system with multiple inflow points (sources) and one outlet (sink), a network cable typically connects to one switch before connecting to several others. it t is utilized for the most part in circumstances where explores dealing with projects need to share their outcomes to additional exploration by making it promptly accessible for a joint effort.
learn more about hierarchical topology
https://brainly.com/question/30542359
#SPJ11
The topology used by traditional mainframe networks is a hierarchical topology.
In this topology, the mainframe computer is located at the top of the hierarchy, with other devices such as terminals and printers connected to it in a tree-like structure. The hierarchical topology allows for centralized control and management of the network, which is important in mainframe environments where data security and reliability are crucial. Traditional mainframe networks typically use a hierarchical topology. This topology consists of a central mainframe computer connected to various devices in a hierarchical structure, with each level connected to the level above it.
To learn more about topology visit;
https://brainly.com/question/30864606
#SPJ11
f A is true, B is true and C is false does the following statement evaluate to true or false
Not(A and B or C)
Group of answer choices
True
False
The statement would evaluate to False.
First, let's evaluate the expression inside the parentheses:
(A and B) is true because both A and B are true.
(A and B) or C is also true because at least one of the expressions is true.
Now let's negate the entire expression with Not:
Not((A and B) or C) would be false because the original expression is true.
So the overall statement would be False.
Zelda: The Ball and Chain, the Dominion Rod, and the Spinner are all items that appear exclusively in which Zelda game?
The Ball and Chain, the Dominion Rod, and the Spinner are all exclusive items in The Legend of Zelda: Twilight Princess.
These items are unique to Twilight Princess and serve different purposes in the game. The Ball and Chain is a weapon used for combat and puzzle-solving, the Dominion Rod allows you to control certain statues, and the Spinner is a transportation device used to travel on rails and over gaps.
The Legend of Zelda: Twilight Princess is the game where you can exclusively find the Ball and Chain, the Dominion Rod, and the Spinner, as they serve specific functions within that particular installment of the Zelda series.
To know more about transportation device visit:
https://brainly.com/question/30028216
#SPJ11
The Ball and Chain, the Dominion Rod, and the Spinner are all items that appear exclusively in The Legend of Zelda: Twilight Princess.
The Legend of Zelda: Twilight Princess is an action-adventure game developed and published by Nintendo. In this game, players control the protagonist, Link, as he journeys through the land of Hyrule to save Princess Zelda from the Twilight realm.
To know more about Legend of Zelda visit:
https://brainly.com/question/6183421
#SPJ11
In an ecosystem, matter is constantly being recycled. In contrast, ______, such as that from the sun, is never recycled.
In an ecosystem, matter is constantly being recycled. In contrast, energy, such as that from the sun, is never recycled.
What is ecosystem?An ecosystem is a community of living organisms (plants, animals, and microorganisms) interacting with each other and with their non-living environment (such as air, water, and soil) in a particular area or habitat. Ecosystems can vary greatly in size, from a small pond to an entire rainforest, and can be characterized by the flow of energy and matter through various biological and physical processes. Within an ecosystem, each organism has a role to play, and the interdependence between organisms is crucial for the overall health and functioning of the ecosystem.
For more information about ecosystem, visit:
https://brainly.com/question/842527
#SPJ11
If sales = 100, rate = .10, and expenses = 50, is the following expression True or False sales <=200 or expenses <100 and rate = .10 Group of answer choices True False
Since there is an "OR" operator in between the expression sales ≤ 200 OR expenses < 100 and rate = 0.10, then both conditions are true.
How can we define a true statement?A statement is true if what it says is true, and false if what it asserts is untrue.
For example, the statement "The bus are always late" is only true if what it describes is true, that is, if the bus are always late.
Also, we can state that a proposition is logically true if and only if its logical opposite is not correct.
The opposing statements must be contradictory. All logical connectives may therefore be stated in terms of maintaining logical truth.
Hence,
sales ≤ 200 is True because sales (100) is less than or equal to 200.expenses < 100 is True because expenses (50) < 100.rate = 0.10 is True because rate is assigned the value of 0.10 in the expression.
Learn more about True Statements:
https://brainly.com/question/10705953
#SPJ1
You obtain beta estimates of general electric from two different online sources and you are surprised to find that they are so different. Which would not be a correct explanation for the difference?
If you obtain beta estimates of General Electric from two different online sources and you are surprised to find that they are so different then the incorrect explanation for the difference would be: The beta values are identical but appear different due to a simple typographical error on one of the websites.
One possible explanation for the difference in beta estimates of General Electric from two different online sources could be the time period or sample size used in the analysis. However, it would not be correct to assume that one source is incorrect simply because it differs from the other. Other factors such as the weighting methodology, the choice of market index used as a benchmark, or differences in the calculation method could also contribute to the discrepancy in the beta estimates. Therefore, it is important to compare and evaluate the assumptions and methodologies used by each source before drawing any conclusions.
The incorrect explanation for the difference in beta estimates of General Electric from two different online sources would be: The beta values are identical but appear different due to a simple typographical error on one of the websites.
Beta estimates may differ between sources due to factors such as varying timeframes, different benchmark indices, or differences in the calculation methods used by the sources. However, a simple typographical error would not be a valid explanation for a significant difference in the beta values.
There could be several reasons why beta estimates of General Electric (GE) from two different online sources might differ. Some possible explanations for the difference may include:
Different Calculation Methods: Beta is a measure of a stock's sensitivity to market movements and can be calculated using various methodologies, such as historical stock price data over different time periods or using different market indices as benchmarks. If the two online sources are using different calculation methods, it can result in different beta estimates for GE.
Timeframe: Beta estimates can vary depending on the timeframe of data used in the calculation. For example, a beta calculated using shorter-term data may result in a different estimate compared to a beta calculated using longer-term data. If the two online sources are using different timeframes for their calculations, it can lead to differences in the beta estimates for GE.
Data Quality: The accuracy and reliability of the data used in the calculation of beta can also impact the results. If the online sources are using different data sources or data quality levels, it can lead to discrepancies in the beta estimates for GE.
Market Conditions: Beta is influenced by market conditions, and different online sources may use different periods of market data or different assumptions about future market conditions. If the sources are using different assumptions or data for market conditions, it can result in different beta estimates for GE.
Updates and Revisions: Online sources may update their data and revise their estimates periodically, which can result in differences in beta estimates for GE at different points in time.
Know more about beta estimates:
https://brainly.com/question/30646319
#SPJ11
air enters a converging-diverging nozzle, at 1.5 mpa and 900 k with a negligible velocity. for an exit mach number (me) of 2.5 and a throat area of 30 cm2, determine a) static pressure at the throat b) static temperature at the throat c) static pressure at the exit d) static temperature at the exit e) mass flow rate through the nozzle
To determine the values at the throat and exit of a converging-diverging nozzle with given conditions, follow these steps:
a) Static pressure at the throat: Since throat Mach number (Mt) is 1, use isentropic relations: P_t/P_0 = (1 + (γ-1)/2 * Mt^2)^(-γ/(γ-1)). Given P_0 = 1.5 MPa and γ = 1.4 (for air), calculate P_t = 0.5293 MPa.
b) Static temperature at the throat: Similarly, T_t/T_0 = (1 + (γ-1)/2 * Mt^2)^(-1). Given T_0 = 900 K, calculate T_t = 635.71 K.
c) Static pressure at the exit: Use the exit Mach number (Me = 2.5) and isentropic relations to find P_e/P_0 = 0.0666. Calculate P_e = 0.0999 MPa.
d) Static temperature at the exit: Using Me = 2.5, find T_e/T_0 = 0.2842. Calculate T_e = 255.78 K.
e) Mass flow rate through the nozzle: m_dot = A_t * P_0 * sqrt(γ/R*T_0) * (1 + (γ-1)/2)^((-γ-1)/(2*(γ-1))). Given A_t = 30 cm^2 (0.003 m^2), R = 287 J/(kg*K), calculate m_dot = 9.04 kg/s.
To know more about Mach number (Me) related problems visit:
brainly.com/question/16868527
#SPJ11
Which type of hazard do cranes ladders scaffolds backhoes and paint rollers all present at a worksite?
Cranes, ladders, scaffolds, backhoes, and paint rollers present a fall hazard at a worksite.
These types of equipment are used to perform tasks at elevated heights, making workers more susceptible to falls. Falls can occur when there is a lack of proper safety measures, such as guardrails, fall arrest systems, or secure ladder placements.
Additionally, accidents may result from using damaged or faulty equipment, inadequate worker training, or poor worksite conditions. To prevent fall hazards, employers should follow safety guidelines, provide necessary training, and regularly inspect equipment to ensure a safe working environment.
To know more about fall hazard visit:
brainly.com/question/13852558
#SPJ11
Cranes, ladders, scaffolds, backhoes, and paint rollers all present fall hazards at a worksite since they are used at elevated levels.
Explanation:The type of hazards that cranes, ladders, scaffolds, backhoes, and paint rollers all present at a worksite are primarily fall hazards. These tools and machines are all used at elevated levels, which pose a risk of a fall. Construction workers operating cranes and backhoes must work at great heights. Ladder use always contains the possibility of falling if not properly balanced or secured. Scaffolds and paint rollers can also lead to height-related accidents if safety precautions are not strictly followed.
Learn more about Fall hazards here:https://brainly.com/question/26393677
An alloy steel chain sling must be removed from service if there is evidence that:
An alloy steel chain sling must be removed from service if there is evidence of wear, nicks, cracks, or deformation.
An alloy steel chain sling is used in heavy lifting operations and is subject to wear and tear. If there is any evidence of wear, nicks, cracks, or deformation, the sling must be removed from service.
These signs indicate that the sling may not be able to safely support the load and could potentially break, causing serious injury or damage. It is important to regularly inspect the chain sling for any signs of damage and immediately remove it from service if any are found.
To know more about alloy steel chain visit:
brainly.com/question/3357674
#SPJ11
the difference between cradle-to-gate and cradle-to-grave lca analysis is that the first does not include:_____.
The difference between cradle-to-gate and cradle-to-grave LCA analysis is that the first does not include the end-of-life stage, whereas the latter considers the entire life cycle of a product, including disposal or recycling.
The difference between cradle-to-gate and cradle-to-grave LCA (Life Cycle Assessment) analysis is that the first does not include the end-of-life phase of a product or service. Cradle-to-gate focuses on the environmental impact from raw material extraction to the point where the product leaves the manufacturer, whereas cradle-to-grave includes the entire life cycle, from raw material extraction through manufacturing, use, and finally disposal or recycling. A life cycle assessment, or LCA, is a method of evaluating the effects that a product has on the environment throughout the entirety of its life, thereby increasing resource efficiency and decreasing liability. A life cycle assessment examines the impact that a construction product has on the environment through five stages: end-of-life, the construction process, the product, and the circular economy.
learn more about LCA
https://brainly.com/question/30039216
#SPJ11
Cradle-to-gate and cradle-to-grave LCA analyses are both important tools used to assess the environmental impact of products and services.
Cradle-to-gate LCA analysis focuses on the entire lifecycle of a product or service, from the extraction of raw materials to the point of sale or delivery. In contrast, cradle-to-grave LCA analysis includes the entire lifecycle of a product or service, from the extraction of raw materials to its end-of-life disposal.
The main difference between these two types of analysis is that cradle-to-gate LCA analysis does not include the end-of-life stage of a product or service. This means that the environmental impact of the disposal or recycling of the product is not taken into account. In contrast, cradle-to-grave LCA analysis takes into account the entire lifecycle of a product or service, including the environmental impact of disposal or recycling.
Both cradle-to-gate and cradle-to-grave LCA analyses are important tools for companies and organizations looking to reduce their environmental impact and improve sustainability. Understanding the difference between these two types of analysis can help organizations make informed decisions about their environmental impact and identify areas for improvement.
To learn more about LCA visit;
https://brainly.com/question/14806510
#SPJ11
A cylindrical 2014-T6 aluminum alloy bar is subjected to compression-tension stress cycling along its axis; results of these tests are shown in below. If the var diameter is 12.0 mm, calculate the maximum allowable load amplitude (in N) to ensure that fatigue failure will not occur at 10^7 cycles, Assume a factor of safety of 3.0, data in Figure below were taken for reversed axial tension-compression tests, and that S is stress amplitude.
The maximum allowable load amplitude is 6403.33 N
How to find the maximum allowable load?The parameters given are:
Diameter of the bar, d = 12 mm
Thus:
d = 0.012 m
Cross sectional area of the bar is given by the formula:
A = πd²/4
A = π*0.012²/4
A = 0.000113 m²
From the Maximum stress versus logarithm of the number of cycles to fatigue failure for 2014-T6 Aluminium bar attached to this solution;
At 10⁷ cycles, Maximum stress, S = 170 MPa
S = 170 * 10⁶ Pa
Factor of safety, N = 3.0
The tensile stress is given by the formula:
σ = S/N
σ = (170 * 10⁶)/3
σ = 56.67 * 10⁶ N/m²
The tensile stress is also given by the formula:
σ = F/A
σ = F/0.000113
F/0.000113 = 56.67 * 10⁶
F = 56.67 * 10⁶ * 0.000113
F = 6403.33 N
Read more about Maximum allowable load at: https://brainly.com/question/31417376
#SPJ1
where are sensors located on a vehicle equipped with side sonar system?
Sensors in a vehicle with a side sonar system are typically located on the side bumpers or door panels. They are evenly distributed along the length of the vehicle for effective detection.
A side sonar system in a vehicle is designed to detect obstacles and other objects near the sides of the car during maneuvers such as parking or changing lanes. To ensure comprehensive coverage, multiple sensors are embedded along the side bumpers or door panels.
These sensors emit ultrasonic waves that bounce off nearby objects and return to the sensors, allowing the system to calculate the distance to the detected object. This information is then relayed to the driver through visual or auditory cues, helping them make safe driving decisions. The precise location of sensors may vary depending on the vehicle make and model.
To Know more about sensors visit:
brainly.com/question/29569820
#SPJ11
genetically engineered organisms represent the highest percentage of which crop grown in the united states?
Genetically engineered organisms represent the highest percentage of corn grown in the United States are Soybeans, cotton, and canola. Well they are also significantly genetically engineered crops.
Genetically engineered (GE) organisms, or genetically modified organisms (GMOs), are organisms whose genetic material has been altered through biotechnology. In the United States, the most prevalent GE crop is corn, with approximately 92% of corn being genetically engineered as of 2020.
This is followed by soybeans, cotton, and canola, with 94%, 94%, and 90% GE rates, respectively. GE crops are popular due to their increased resistance to pests, herbicides, and environmental conditions, as well as their ability to produce higher yields. These factors contribute to the widespread adoption of genetically engineered crops in the United States.
To know more about genetically modified organisms visit:
brainly.com/question/30094586
#SPJ11
If A = 10 and B = 20, then A>b and A = B is (True or False). Group of answer choices True False
Answer:
........
....... False
The accompanying figure shows a rectangular coil consisting of 40 closely spaced turns that has a resistance of 7.0 Ω. The magnetic field at all points inside the coil varies according to B = B0e−t, where B0 = 0.80 T and = 200 s−1. What is the current induced in the coil (in A) at the following times? (Enter the magnitudes.)
(a)0.001 s
(b) 0.002 s
(c) 2.0 s
A sand is densified by compaction at a construction site so that the void ratio changes from 0.80 to 0.50. If the specific gravity of solids is 2.70, what is the increase in the dry unit weight of the sand (in kN/m3 and pcf)?
The increase in the dry unit weight of the sand 2.94 kN/m³
How to find the increase in the dry unit weight of the sandFirst, we need to find the initial and final dry unit weights.
Initial void ratio (e1) = 0.80
Final void ratio (e2) = 0.50
(γ_d1) = (2.70 × 9.81) / (1 + 0.80)
= 4.72 kN/m³
Final dry unit weight (γ_d2) = (2.70 × 9.81) / (1 + 0.50)
γ_d2 ≈ 17.66 kN/m³
Then we find the increase in the dry unit weight of the sand:
= 7.66 kN/m³ - 14.72 kN/m³
= 2.94 kN/m³
Read more on specific gravity here:https://brainly.com/question/21901052
#SPJ1
The sum of all currents entering and exiting a node is sometimes zero.
a. True
b. False
TRUE
This observation about currents in a node is nicely captured in general form as Kirchhoff's Current Law, The sum of all currents flowing into a node is zero. The index n counts the branches attached to the node.
In a Pahl and Beitz evaluation one of the Criteria has a Weighting Factor (W) = 0.20 and a Numerical Vlaue (NV) = 3. What is the Weighted Value for this Criteria?
a. 3
b. 3.2
c. 0.2
d. 15
e. 0.6
The answer is option e. 0.6
In a Pahl and Beitz evaluation, the Weighted Value (WV) for a criterion can be calculated using the formula:
Weighted Value (WV) = Weighting Factor (W) × Numerical Value (NV).
In this case, the Weighting Factor (W) is 0.20, and the Numerical Value (NV) is 3.
Use the formula WV = W × NV.
Weighted Value: WV = 0.20 × 3 = 0.6.
So, the Weighted Value for this criterion is 0.6, making the correct answer choice (e).
Learn more about Weighting Factor: https://brainly.com/question/14171941
#SPJ11
how to install a ceiling fan without existing wiring
To install a ceiling fan without existing wiring, hire a licensed electrician and use a swag kit.
First, choose a ceiling fan with a swag kit, which allows for plug-in installation without hardwiring. Next, identify a suitable location for the fan, ensuring it's securely anchored to a ceiling joist.
The swag kit will include a cord with a plug for power, and you will need to route this cord safely along the ceiling and down the wall to an electrical outlet, using cord covers for aesthetics and safety.
Plug in the fan, and use the provided remote control or pull chain to operate it. Remember to hire a licensed electrician if you are not confident in your ability to perform this task, as working with electricity can be dangerous.
To Know more about ceiling fan visit:
brainly.com/question/20240728
#SPJ11
FILL IN THE BLANK hackers use __________ to execute arbitrary scripts through the web browser.
Hackers use "cross-site scripting (XSS)" to execute arbitrary scripts through the web browser.
Cross-site scripting (XSS) is a type of web vulnerability that allows hackers to inject malicious scripts into web pages viewed by other users. This is done by taking advantage of vulnerabilities in web applications that allow user-generated content to be displayed on web pages without proper validation or sanitization.
Once the malicious script is injected into the web page, it can be executed in the context of the victim's browser, allowing the attacker to perform various unauthorized actions, such as stealing sensitive information (e.g., login credentials, credit card information), modifying web page content, redirecting users to malicious websites, or performing other malicious activities.
XSS attacks can occur in different forms, including stored (persistent) XSS and reflected (non-persistent) XSS. In stored XSS, the malicious script is permanently stored on the server and executed whenever a user requests the infected web page. In reflected XSS, the malicious script is included in the URL or input fields of a web page and is reflected back to the user in the response, causing the script to be executed in the user's browser.
Protecting against XSS attacks involves implementing proper input validation and output encoding in web applications to prevent the injection of malicious scripts into web pages. Web developers should follow secure coding practices and use security mechanisms, such as Content Security Policy (CSP), to mitigate the risk of XSS vulnerabilities. Additionally, web users should be cautious when clicking on links or entering data on web pages, especially those that do not have proper security measures in place.
Hence, hackers use "cross-site scripting (XSS)" to execute arbitrary scripts through the web browser.
Know more about "cross-site scripting (XSS)" click here:
https://brainly.com/question/30893662
#SPJ11
the most likely creep mechanism at high temperatures and low applied stresses is: the most likely creep mechanism at high temperatures and low applied stresses is:crack propagationgrain boundary diffusiondislocation glide.dislocation motion (climb)bulk diffusion
The most likely creep mechanism at high temperatures and low applied stresses is "dislocation motion (climb)". Option e is answer.
This mechanism involves the movement of dislocations through the lattice structure of a material, which leads to deformation or strain. When high temperatures and low applied stresses are present, the movement of dislocations through the lattice structure becomes the dominant mechanism for creep.
Other creep mechanisms such as crack propagation, grain boundary diffusion, and bulk diffusion are more likely to occur under different conditions such as low temperatures, high applied stresses, or in materials with specific microstructures. Understanding the dominant creep mechanism is important in designing and selecting materials for high-temperature applications where creep resistance is critical.
Option e is answer.
You can learn more about creep at
https://brainly.com/question/30389236
#SPJ11
is it worth replacing compressor on ac unit in car?
It depends on the age and condition of the car's AC unit, as well as the cost of the compressor replacement. If the car is relatively new and the AC unit is in good condition, replacing the compressor may be a worthwhile investment to extend the life of the unit.
However, if the car is older or the AC unit has other issues, it may be more cost-effective to replace the entire unit instead of just the compressor.
Ultimately, the decision to replace the compressor on an AC unit in a car depends on a variety of factors and should be based on a careful assessment of the costs and benefits. It is recommended to consult with a qualified mechanic or automotive technician to determine the best course of action for your specific situation.
For more information about AC unit, visit:
https://brainly.com/question/27466640
#SPJ11
fracture is a direct result of... fracture is a direct result of... ...impede dislocation motion in a material. ...elastic deformations in a material. ...crack reduction in a material. ...dislocation glide in a material. ...crack propagation in a material.
Fracture is a direct result of crack propagation in a material. option d
When a crack is present in a material, it acts as a stress concentrator, causing stress to be concentrated at the tip of the crack.
This can lead to the propagation of the crack, resulting in fracture of the material. Fracture can occur in different ways, depending on the material and the conditions under which it is loaded.
For example, in ductile materials, fracture can occur through ductile tearing or shear deformation, while in brittle materials, fracture occurs by rapid crack propagation without significant plastic deformation.
To learn more about fracture, click here:
https://brainly.com/question/7465590
#SPJ11
if all the resistors in the series circuit in step 2 were 10 times larger than the specified values, what would happen to the output voltage?
If all the resistors in the series circuit were 10 times larger than the specified values, the output voltage would be 10 times larger as well.
In a series circuit, the total resistance is the sum of all the resistors. If each resistor is 10 times larger, the total resistance would also be 10 times larger. According to Ohm's law, V = IR, where V is the output voltage, I is the current, and R is the resistance.
If the resistance is 10 times larger, the current would be 10 times smaller, but the voltage across the circuit would be the same.
Therefore, the output voltage would be 10 times larger.
To know more about Ohm's law visit:
brainly.com/question/30355875
#SPJ11
Engineering design is a set of decision making processes that attempts to determine the form of an object (or process) given a customer's desired function(s).
a. True
b. False
The given statement "engineering design is an essential component of any project, and involves a set of decision making processes that are aimed at achieving a desired form or function" is true.
To provide an explanation, engineering design is a crucial step in the development of any product or process. It involves a systematic approach to identifying, analyzing, and solving problems that arise during the development process.
To know more about engineering design visit:
https://brainly.com/question/30524467
#SPJ11
The given statement "Engineering design is a set of decision making processes that attempts to determine the form of an object (or process) given a customer's desired function(s)" is true. It is important for engineers to have a strong understanding of the design process and the tools available to support decision-making.
Engineering design involves a series of steps that include understanding the customer's needs, developing solutions, and selecting the best design to meet the desired function(s).
The goal of engineering design is to create a product or process that satisfies the customer's requirements while considering factors such as cost, safety, reliability, and sustainability. Engineering design is a critical component of many industries, including manufacturing, construction, and software development. Therefore, it is important for engineers to have a strong understanding of the design process and the tools available to support decision-making.To know more about software development visit:
https://brainly.com/question/3188992
#SPJ11
a decorative pillar full of notches is used to hold up a porch on the second floor of a house. compared to a similarly sized pillar made of the same material without the decorative notches...a decorative pillar full of notches is used to hold up a porch on the second floor of a house. compared to a similarly sized pillar made of the same material without the decorative notches......the decorative pillar will have the same load bearing capacity because both are made of the same material....the decorative pillar will have a lower load bearing capacity because of the stress concentration near the notches....the decorative pillar will have a higher load bearing capacity because of the stress concentration near the notches....the decorative pillar will have a lower load bearing capacity because the notches will act as barriers to dislocation motion....the decorative pillar will have a higher load bearing capacity because the notches will act as barriers to dislocation motion.
The correct answer is the decorative pillar will have a lower load bearing capacity because of the stress concentration near the notches.
The notches in the decorative pillar create areas of high stress concentration, which weakens the overall strength of the pillar. This is because the notches act as stress concentrators, which causes the material around them to experience more stress than the surrounding areas.
As a result, the decorative pillar will have a lower load bearing capacity compared to a similarly sized pillar made of the same material without notches. The notches can also act as barriers to dislocation motion, but this effect is not strong enough to compensate for the weakening caused by the stress concentration.
To know more about stress concentration visit:
brainly.com/question/13441104
#SPJ11
the shampoo we made in this experiment is a solid or dry form. what are some advantages of dry shampoo over liquid shampoo? explain.
Dry shampoo has several advantages over liquid shampoo is: it is easy to use as it does not require any water, making it a convenient option for those who are short on time or do not have access to water.
Secondly, it is travel-friendly and can be carried in a small container without the risk of spillage. Thirdly, it is known to absorb excess oil and sweat from the scalp, leaving hair feeling fresh and clean. Lastly, it can help to extend the time between hair washes, reducing the frequency of hair damage caused by frequent washing and styling. Overall, dry shampoo is a great option for people looking for a quick and convenient solution to keep their hair clean and fresh.
For example, someone who is camping or traveling may not have access to a shower or running water, but can still use dry shampoo to refresh their hair. Additionally, using dry shampoo can save time in the morning when getting ready for work or school, as there is no need to wet hair and then wait for it to dry before applying shampoo.
Learn more about Dry shampoo: https://brainly.com/question/30102438
#SPJ11
The rate at which supernovae explode in a starburst galaxy that is forming stars 10 times faster than the Milky Way is (a) about the same as in the Milky Way. (b) about 10 times higher than in the Milky Way. (c) about 100 times higher than in the Milky way.
The correct option is (b) about 10 times higher than in the Milky Way.
Supernovae explosions in a starburst galaxy with a star formation rate 10 times faster than the Milky Way occur at a rate approximately 10 times higher. Supernovae are massive explosions that occur at the end of a star's life cycle. In a starburst galaxy, where stars are forming at a much faster rate than in the Milky Way, the number of supernovae is also expected to be higher.
Studies have shown that the rate of supernovae in a starburst galaxy can be up to 100 times higher than in the Milky Way. This is because there are more massive stars in a starburst galaxy, and massive stars tend to explode more frequently than smaller stars, hence option (b) is correct.
To Know more about supernovae visit:
brainly.com/question/30006151
#SPJ11
Assume that source b is addressed to the accumulated count of an up-counter. With s1 closed, what setting of the thumbwheel switch would be required to turn the pilot light off when the accumulated count reaches 150?
Assume that source b is addressed to the accumulated count of an up-counter. The setting of the thumbwheel switch required is 150
What is the setting about?The accumulated count of an up-counter is linked to the input source b when s1 is in a closed state. As long as the input source b remains active, the counter will continue to increment its count.
Therefore, the thumbwheel switch need to or must be adjusted to 150 in order to shut off the pilot light once the accumulated count reaches that level. To ensure the pilot light is turned off, it is necessary for the comparator's output to change once the counter hits 150.
Learn more about setting from
https://brainly.com/question/1467117
#SPJ1
