Solid-solution strengthening refers to the improvement of a metal's strength due to the addition of alloying elements. Solid-solution strengthening can be classified into two types: substitutional solid-solution strengthening and interstitial solid-solution strengthening.
Solid-solution strengthening is a kind of point defect strengthening that is commonly used in metallurgy. It arises from the addition of impurities to the pure metal lattice, which has a significant effect on the crystal lattice's properties. Solid-solution strengthening can be classified into two types: substitutional solid-solution strengthening and interstitial solid-solution strengthening. Substitutional solid-solution strengthening occurs when one metal atom substitutes for another metal atom in the lattice. The substitution of atoms that are larger or smaller than the original atoms causes lattice strain, and the crystal's energy is raised. As a result, the crystal's movement is hindered, and the metal becomes more resistant to deformation. Interstitial solid-solution strengthening occurs when an atom is added to a crystal's interstitial position. Since the size of an interstitial atom is generally much smaller than that of a substitutional atom, interstitial solid-solution strengthening is less effective than substitutional solid-solution strengthening.Solid-solution strengthening is an important process in metallurgy, and the addition of different alloying elements can greatly increase the strength and hardness of the metal.
To know more about metallurgy visit :
brainly.com/question/9147294
#SPJ11
what is the wavelength of the photon released when an electron in a hydrogen atom transitions from = 6 to = 1?
The wavelength of the photon released when an electron in a hydrogen atom transitions from energy level = 6 to energy level = 1 is 1.216 * 10^-7 m.
When an electron transitions from energy level = 6 to energy level = 1, a photon with a wavelength of 1.216 * 10^-7 m is released.
The wavelength of the photon released during the transition can be calculated using the formula:ΔE = (E_final - E_initial) = (hc/λ)where:ΔE = change in energy of the electron h = Planck's constant (6.626 * 10^-34 J*s)c = speed of light (2.998 * 10^8 m/s)λ = wavelength of the photon released E_final = energy of the electron in the final energy levelE_initial = energy of the electron in the initial energy level.
For an electron transitioning from energy level = 6 to energy level = 1 in a hydrogen atom, we have : E_final = -2.18 * 10^-18 J / (1^2) = -2.18 * 10^-18 JE_initial = -2.18 * 10^-18 J / (6^2) = -6.05 * 10^-20 JΔE = (-2.18 * 10^-18 J) - (-6.05 * 10^-20 J) = -2.12 * 10^-18 J Substituting these values into the formula and solving for λ, we get:ΔE = hc/λλ = hc/ΔEλ = (6.626 * 10^-34 J*s) * (2.998 * 10^8 m/s) / (-2.12 * 10^-18 J)λ = 1.216 * 10^-7 m .
Therefore, the wavelength of the photon released when an electron in a hydrogen atom transitions from energy level = 6 to energy level = 1 is 1.216 * 10^-7 m.
To know more about Wavelength visit :
https://brainly.com/question/31322456
#SPJ11
the speed of light in a specific medium is 0.8 c where c is the speed of light in vacuum. the refractive index of this medium is:
Thus, the refractive index of this medium is 1.25.
The refractive index (n) of the medium can be determined by the following formula:
n = c / v, where c is the velocity of light in vacuum and v is the velocity of light in the medium. Therefore, the refractive index of the given medium is:
n = c / v = c / (0.8c) = 1.25
The refractive index is defined as the ratio of the speed of light in vacuum to the speed of light in a given medium. It is denoted by n and is a dimensionless quantity. The refractive index of a medium provides information about how much the speed of light changes when it passes through that medium. It is an important parameter in optics and is used to calculate various optical phenomena such as reflection, refraction, and diffraction.The refractive index of a medium depends on various factors such as the density, temperature, and composition of the medium. It also varies with the wavelength of light passing through the medium. In general, the refractive index of a medium is greater than one, indicating that the speed of light is slower in the medium than in vacuum.
to know more about refractive index visit:
https://brainly.com/question/30761100
#SPJ11
When a P = 690 W ideal (lossless) transformer is operated at full power with an rms input current of I1 = 2.6 A, it produces an rms output voltage of V2 = 8.3 V. What is the input voltage, in volts?
The input voltage is 265.38 volts for an ideal transformer (lossless) operated at full power with an rms input current of I1 = 2.6 A, producing an rms output voltage of V2 = 8.3 V.
When a P = 690 W ideal (lossless) transformer is operated at full power with an rms input current of I1 = 2.6 A, it produces an rms output voltage of V2 = 8.3 V.
The input voltage can be calculated using the relationship between the input power and input voltage.Input power of transformer = Output power of transformer690 = V2 × I2where V2 = 8.3 VThus, I2 = (690 W) / (8.3 V) = 83.13 AFor a lossless transformer, the input power is equal to the output power. Therefore,690 W = V1 × I1where I1 = 2.6 AV1 = (690 W) / (2.6 A) = 265.38 V .
Therefore, the input voltage is 265.38 volts.
In conclusion, the input voltage is 265.38 volts for an ideal transformer (lossless) operated at full power with an rms input current of I1 = 2.6 A, producing an rms output voltage of V2 = 8.3 V.
To know more about Voltage visit :
https://brainly.com/question/13396105
#SPJ11
A 1450 kg car has four 13 kg wheels, which can be modelled as
disks (flat cylinders).
Part A
Find the fraction of total kinetic energy of the car due to the
rotation of the wheels.
Enter your answer i
The fraction of the total kinetic energy due to the rotation of the wheels can be calculated by dividing the rotational kinetic energy of the wheels by the total kinetic energy of the car: Fraction = K_rot / K_total.Unfortunately, without information regarding the radius of the wheels or the linear velocity of the car, it is not possible to calculate the specific fraction of the total kinetic energy due to the rotation of the wheels.
To find the fraction of the total kinetic energy of the car due to the rotation of the wheels, we need to consider the rotational kinetic energy (K_rot) of the wheels and the total kinetic energy (K_total) of the car.The rotational kinetic energy of a disk can be calculated using the formula: K_rot = (1/2) * I * ω^2, where I is the moment of inertia and ω is the angular velocity.
Since the wheels are modeled as flat cylinders, the moment of inertia of each wheel can be calculated using the formula: I = (1/2) * m * r^2, where m is the mass of the wheel and r is its radius.The total kinetic energy of the car can be calculated using the formula: K_total = (1/2) * M * V^2, where M is the mass of the car and V is its linear velocity.
To find the fraction of the total kinetic energy due to the rotation of the wheels, we need to divide the rotational kinetic energy of the wheels by the total kinetic energy of the car: Fraction = K_rot / K_total.
Now, plugging in the given values:
Mass of the car (M) = 1450 kgMass of each wheel (m) = 13 kgNumber of wheels (N) = 4
First, let's calculate the moment of inertia of each wheel: I = (1/2) * m * r^2 = (1/2) * 13 kg * (r^2)
Now, let's calculate the rotational kinetic energy of each wheel: K_rot = (1/2) * I * ω^2
The angular velocity (ω) can be related to the linear velocity (V) using the formula: V = ω * r, where r is the radius of the wheel.
The linear velocity of the car can be calculated using the formula: V = (Total momentum of the car) / (Total mass of the car). Assuming the wheels are rolling without slipping, the total momentum of the car is given by: (Total momentum of the car) = (Mass of the car) * (Linear velocity of the car)
To know more about kinetic energy refer here:
https://brainly.com/question/999862#
#SPJ11
How
many joules of energy are there in one photo. of orange light whose
wavelength is 630x10^9m?
3.15 x [tex]10^-^3^4[/tex] J of energy are there in one photo. of orange light whose
wavelength is 630x[tex]10^9[/tex]m.
To calculate the energy of a photon, we can use the equation:
E = hc / λ
where E is the energy of the photon, h is Planck's constant (6.626 x [tex]10^-^3^4[/tex] J*s), c is the speed of light (3.0 x [tex]10^8[/tex] m/s), and λ is the wavelength of the light in meters.
Given the wavelength of the orange light as 630 x [tex]10^9[/tex]m, we can substitute the values into the equation to calculate the energy of one photon:
E = (6.626 x [tex]10^-^3^4[/tex]J*s * 3.0 x [tex]10^8[/tex] m/s) / (630 x [tex]10^9[/tex] m)
Simplifying the equation:
E = (1.988 x [tex]10^-^2^5[/tex]J*m) / (630 x[tex]10^9[/tex]m)
E = 3.15 x 10[tex]10^-^3^4[/tex] J
It's important to note that the energy of a single photon is very small due to its quantum nature. In practical applications, the energy of photons is often measured in terms of the number of photons rather than individual photon energy.
For more such information on: energy
https://brainly.com/question/13881533
#SPJ8
Two planes leave the same airport at the same time: One flies at 20" east of north at 500 miles per hour. The second flies at 30" east of south at 600 miles per hour: How far apart are the planes after 2 hours?
The distance between the two planes after 2 hours is approximately 1288.94 miles.
Given, One plane flies at 20 degrees east of north at 500 miles per hour
The second plane flies at 30 degrees east of south at 600 miles per hour.
Using Pythagorean theorem, D = √((500 * cos 20 * 2)^2 + (500 * sin 20 * 2 + 600 * sin 30 * 2)^2)On calculating, we get:D ≈ 1288.94 miles
Hence, the distance between the two planes after 2 hours is approximately 1288.94 miles. Hence, the detail ans is as follows:
Given, One plane flies at 20 degrees east of north at 500 miles per hour.The second plane flies at 30 degrees east of south at 600 miles per hour.
To find: The distance between the two planes after 2 hours. We can solve this problem by using the Pythagorean theorem.
Let's suppose the initial position of both the planes is 'O' and after 2 hours they are at positions 'P' and 'Q' as shown in the figure below. The distance between the two planes is PQ.
Using Pythagorean theorem, we get:D = √((500 * cos 20 * 2)^2 + (500 * sin 20 * 2 + 600 * sin 30 * 2)^2)On calculating, we get:D ≈ 1288.94 miles
Hence, the distance between the two planes after 2 hours is approximately 1288.94 miles.
Learn more about distance
brainly.com/question/13034462
#SPJ11
if two equal masses are suspended from either end of a string passing over a light pulley (an atwood’s machine), what kind of motion do you expect to occur? why?
If two equal masses are suspended from either end of a string passing over a light pulley (an Atwood’s machine), the kind of motion that is expected to occur is SHM (Simple Harmonic Motion).
According to the given condition, the two masses are equal and there is no net force acting on the system. Thus, the two masses move towards each other, and the string becomes taut. Hence, the system can be assumed as a simple harmonic oscillator because it satisfies the following conditions:-The period of oscillation of the system is given as: \[T=2\pi \sqrt{\frac{m}{M+2m}}\] where m is the mass of each particle, and M is the mass of the pulley. The amplitude of the system is given as: \[A=\frac{m}{M+2m}\] Therefore, the kind of motion that is expected to occur is SHM (Simple Harmonic Motion) because the given system satisfies the above-mentioned conditions.
In this Atwood’s machine, two equal masses are connected by an inextensible light string that passes over a frictionless pulley. The mass is assumed to be very large in comparison to the masses of the particles. The system is initially released from rest, and the particles start moving towards each other. Hence, the acceleration of the system can be written as: a = (m1 - m2)g / (m1 + m2)The above equation represents that the acceleration of the system is directly proportional to the difference in masses of the particles. If the masses are equal, then the acceleration of the system is zero. Hence, the system will not have any motion. However, in reality, it is not possible to have two exactly equal masses. Therefore, there will always be some difference in masses, and hence, the system will always show some kind of motion, i.e., SHM. Therefore, the kind of motion that is expected to occur is SHM (Simple Harmonic Motion) because the given system satisfies the above-mentioned conditions.
To know more about light pulley visit :
https://brainly.com/question/31426020
#SPJ11
find a value for h so that the equation ax = 0 has a solution x which is not the 0 vector, where 1-12 1 0 1 2-1 2
The value of h such that ax = 0 has a solution x which is not the 0 vector is h = -1.
Given that the matrix is 1 - 12 1 0 1 2 - 1 2To find the value of h such that ax=0 has a solution x, which is not the zero vector.
Step 1:Let the matrix be A and x is a column vector, then the equation is ax=0A x = λ x, where λ is the eigenvalue of the matrix A Therefore, det(A - λI) = 0
Step 2: det(A - λI) = 0|1-λ -12 1||0 1-λ 0||1 2 -1- λ||2 0 2||0 1 0||1 -1 2- λ| = 0 ⇒ (1- λ)(1- λ)(-1 - λ) + 24 = 0⇒ λ³ - λ² - 23 λ - 24 = 0
Step 3:Now, for x to be a non-zero vector, one of the eigenvalues must be zero, thus we equate λ to zero.λ³ - λ² - 23 λ - 24 = 0⇒ λ = 3, - 4, - 1
Step 4:Therefore, to find the value of h, substitute the value of λ = -1 into the matrix equation (A - λI) x = 0. A - λI = |2 12 1||0 2 0||1 2 0|
Hence, the augmented matrix becomes:|2 12 1 0||0 2 0 0||1 2 0 0|
We convert it into the row-echelon form by adding -1 times the 1st row to the 3rd row, then add -6 times the 2nd row to the 1st row. The result is:|1 0 - 6 - 1||0 2 0 0||0 0 1 - 2|
Step 5:Therefore, the system of equations can be written as: x₁ - 6x₃ = -1x₂ = 0x₃ = 2
Substituting the values of x₂ and x₃ into the equation x₁ - 6x₃ = -1. We get, x₁ - 6(2) = -1⇒ x₁ = 11
Step 6:Therefore, the value of h such that ax = 0 has a solution x which is not the 0 vector is h = -1.
In conclusion, the value of h such that ax = 0 has a solution x which is not the 0 vector is h = -1.
To know more about vector visit:
brainly.com/question/29740341
#SPJ11
determine the linearized equations of motion and place in matrix form
The linearized equations of motion are the same as the linear equations of motion, but they are used to describe the motion of a system when the displacements are small relative to the equilibrium position.
The matrix form of the linearized equations of motion is given by the following equation:
[M]{ẍ} + [C]{ẋ} + [K]{x} = {F}
where [M], [C], and [K] are the mass, damping, and stiffness matrices, respectively. {x}, {ẋ}, and {ẍ} are the vectors of the displacement, velocity, and acceleration, respectively. {F} is the vector of the external forces.
The matrix equation can be simplified by assuming that the damping and external forces are zero. This simplification is often used in engineering problems where damping and external forces are small relative to the stiffness of the system.
The simplified equation is given by:
[M]{ẍ} + [K]{x} = {0}
where [M] and [K] are the mass and stiffness matrices, respectively. {x} and {ẍ} are the vectors of the displacement and acceleration, respectively. The equation can be further simplified by assuming that the displacement vector is harmonic. This assumption is valid when the system is excited by a sinusoidal force.
The harmonic assumption is given by:
{x} = {A}sin(ωt)
where {A} is the amplitude of the displacement and ω is the angular frequency of the system.
Using the harmonic assumption, the linearized equation of motion can be written as:
[M]{A}ω²sin(ωt) + [K]{A}sin(ωt) = {0}
This equation can be solved for {A} by dividing both sides by sin(ωt) and solving for {A}.
The solution for {A} is given by:
{A} = [K]⁻¹[M]ω²{A}
The matrix form of the linearized equations of motion is [M]{ẍ} + [C]{ẋ} + [K]{x} = {F}. The simplified equation is [M]{ẍ} + [K]{x} = {0}. When the displacement vector is harmonic, the linearized equation of motion can be written as [M]{A}ω²sin(ωt) + [K]{A}sin(ωt) = {0}. The solution for {A} is {A} = [K]⁻¹[M]ω²{A}.
To know more about equilibrium, visit:
https://brainly.com/question/12977920
#SPJ11
the centers of a 8.0 kg lead ball and a 120 g lead ball are separated by 13cm . What gravitational force does each exert on the other?
The gravitational force exerted by a 8.0 kg lead ball and a 120 g lead ball on each other when their centers are separated by 13 cm is 5.44 × 10-8 N in opposite directions.
The gravitational force that a 8.0 kg lead ball and a 120 g lead ball exert on each other when their centers are separated by 13 cm can be calculated using the formula;
F = G * (m1 * m2) / d²where;G = Universal gravitational constant = 6.674 × 10-11 N(m/kg)²m1 = mass of the first object = 8.0 kg m2 = mass of the second object = 120 g = 0.12 kg
d = distance between the centers of the two objects = 13 cm = 0.13 m
Substituting these values into the equation:F = 6.674 × 10-11 * (8.0 kg * 0.12 kg) / (0.13 m)²= 5.44 × 10-8 N
The gravitational force exerted on each object is the same in magnitude but in opposite direction. Therefore, each object exerts a force of 5.44 × 10-8 N on the other object in opposite direction.
n conclusion, the gravitational force exerted by a 8.0 kg lead ball and a 120 g lead ball on each other when their centers are separated by 13 cm is 5.44 × 10-8 N in opposite directions.
The calculation was carried out using the formula F = G * (m1 * m2) / d², where G is the Universal gravitational constant, m1 and m2 are the masses of the two objects respectively, and d is the distance between their centers. It is essential to note that the force of gravity between two objects decreases with the square of the distance between them.
To know more about gravitational force visit:
brainly.com/question/32609171
#SPJ11
2.
Determine whether each statement regarding speed or velocity is true or false. True Answer Bank If an object moves at constant velocity, it must also be moving at constant speed. If you know the dista
The given statement "If an object moves at constant velocity, it must also be moving at constant speed" is true.
The given statement "If you know the distance traveled and the time taken, you can determine both the speed and velocity of an object" is false.
The reason for this is that velocity is a vector quantity that describes both the speed and direction of motion. So, if an object is moving at a constant velocity, it means that its speed is not changing, and it is also moving in a straight line at a constant rate.
If an object moves with constant speed, it does not necessarily mean that it is moving at constant velocity because velocity also includes direction. For example, if a car is moving in a circular path with constant speed, its velocity is constantly changing because the direction of motion is constantly changing.
Hence, it is possible for an object to move with constant speed but not at a constant velocity. Therefore, the statement that "If you know the distance traveled and the time taken, you can determine both the speed and velocity of an object" is false because distance and time only give us information about speed, not velocity. To determine velocity, we need to know both speed and direction of motion.
For more such questions on velocity, click on:
https://brainly.com/question/80295
#SPJ8
A The northward component of vector A is equal in magnitude to the southward component of vector it. Also, the eastward component of vector is the same as the eastward component of B. Select ALL of the statements below that must always be correct, based on the information given View Available Hint(s) The magnitude of vector A is equal to the magnitude of vector Vector is perpendicular to vector 3. Vector A is in the opposite direction to vector B □ Vector A is parallel to Vector i The magnitude of vector A is twice the magnitude of vector B Submit Previous Answers X Incorrect; Try Again; 5 attempts remaining Next > Provide Feedback
The statements that must always be correct, based on the given information, are: The magnitude of vector A is equal to the magnitude of vector B. The eastward component of vector A is the same as the eastward component of vector B.
Let's analyze the given information and determine which statements must always be correct:
The magnitude of vector A is equal to the magnitude of vector B:
Based on the given information, we are not provided with any specific details regarding the magnitudes of vector A and vector B. Therefore, we cannot conclude that the magnitudes are equal. This statement is not necessarily correct.
The magnitude of vector A is twice the magnitude of vector B:
Again, the given information does not provide any specific details about the magnitudes of vector A and vector B. Hence, we cannot conclude that the magnitude of vector A is twice the magnitude of vector B. This statement is not necessarily correct.
The northward component of vector A is equal in magnitude to the southward component of vector B:
From the given information, we know that the northward component of vector A is equal in magnitude to the southward component of vector B. Therefore, this statement must always be correct.
The eastward component of vector A is the same as the eastward component of vector B:
The given information explicitly states that the eastward component of vector A is the same as the eastward component of vector B. Thus, this statement must always be correct.
Vector A is in the opposite direction to vector B:
The given information does not provide any specific details about the directions of vector A and vector B. Therefore, we cannot conclude that vector A is in the opposite direction to vector B. This statement is not necessarily correct.
Based on the given information, the statements that must always be correct are: "The northward component of vector A is equal in magnitude to the southward component of vector B" and "The eastward component of vector A is the same as the eastward component of vector B." The other statements cannot be determined solely from the given information.
To know more about vector ,visit:
https://brainly.com/question/27854247
#SPJ11
A block of weight w sits on a plane inclined at an angle θas shown. (Figure 1) The coefficient of kinetic friction between the plane and the block is μ.
Part A
What is the work Wf done on the block by the force of friction as the block moves a distance L up the incline?
Express your answer in terms of some or all of the following: μ, w, θ, L.
Part B
What is the work W done by the applied force of magnitude F?
Express your answer in terms of some or all of the following: μ, w, θ, L.
Part C
What is the change in the potential energy of the block, ΔU, after it has been pushed a distance L up the incline?
Express your answer in terms of some or all of the following: μ, w, θ, L.
The work W done by the applied force of magnitude F can be calculated by the following formula; W = FLcosθ - μwLsinθPart CThe change in the potential energy of the block, ΔU, after it has been pushed a distance L up the incline can be calculated by the following formula; ΔU = wLsinθ
Part AThe work Wf done on the block by the force of friction as the block moves a distance L up the incline can be calculated by the following formula;Wf = -μwLsinθPart BThe work W done by the applied force of magnitude F can be calculated by the following formula;W = FLcosθ - μwLsinθPart CThe change in the potential energy of the block, ΔU, after it has been pushed a distance L up the incline can be calculated by the following formula;ΔU = wLsinθ
To know more about potential energy visit :
brainly.com/question/24284560
#SPJ11
In a Young’s double-slit experiment, how many maxima occur
between the 4th order maxima?
a. 6
b. 7
c. 8
d. Three more than the number of minima.
The number of maxima that occur in a young’s double-slit experiment is three more than the number of minima.
In a Young's double-slit experiment, a light wave passes through a slit and diffracts, creating two coherent sources of light that interfere with one another. These waves are directed towards a screen with two slits, resulting in interference patterns.The light waves diffract and interfere with one another at the slits, creating an interference pattern on the screen. When the two waves are in phase, they interfere constructively and produce a bright spot. When the two waves are out of phase, they interfere destructively and produce a dark spot. The bright and dark bands of the interference pattern on the screen are known as maxima and minima, respectively.According to the question, the number of maxima that occur in a Young’s double-slit experiment is three more than the number of minima. Thus, if there are n minima, then there will be n + 3 maxima.
Know more about double-slit experiment, here:
https://brainly.com/question/28108126
#SPJ11
A fixed 14.6-cm-diameter wire coil is perpendicular to a magnetic field 0.68 T pointing up. In 0.30 s, the field is changed to 0.31 T pointing down.
What is the average induced emf in the coil? Expre
The average induced EMF in the coil is 0.335 volts.
The magnetic flux linked with a coil is proportional to the magnitude of the induced EMF according to Faraday's law. The wire coil in this problem has a fixed diameter of 14.6 cm and is positioned perpendicular to a magnetic field that points upward at 0.68 T. In 0.30 seconds, the magnetic field changes to 0.31 T and points downward, and we are to find the average induced EMF in the coil.
To calculate the average induced EMF, we will use the formula given below; Average Induced EMF = ΔFlux/ΔtInitially, the flux linked with the coil is given by;Φ1 = NAB Where; N = Number of turns of the coil A = Area of the coil B = Magnetic field strength= πr²= π (14.6/2)²= 0.0167 m²Therefore,Φ1 = NAB= (1) (0.0167) (0.68)= 0.01138 Wb When the magnetic field is changed to 0.31 T pointing downward, the magnetic flux linked with the coil will also change, and it is given by;Φ2 = NAB= (1) (0.0167) (0.31)= 0.005177 Wb Therefore, the change in magnetic flux ΔΦ is given by;ΔΦ = Φ2 - Φ1= 0.005177 - 0.01138= -0.00620 Wb We have a negative value of ΔΦ, indicating that the magnetic flux is decreasing in the coil, and the EMF will be induced to oppose the change in flux. Hence, we need to take the magnitude of ΔΦ. Therefore,ΔΦ = 0.00620 Wb Substituting the values in the formula for average induced EMF, we have; Average Induced EMF = ΔFlux/Δt= 0.00620/0.30= 0.02067 volts The average induced EMF in the coil is 0.335 volts.
Know more about EMF in the coil, here:
https://brainly.com/question/30891425
#SPJ11
what is the reason for the widespread use of fins on surfaces?
Fins are commonly used on surfaces, such as heat sinks or radiator fins, to enhance heat transfer and improve thermal efficiency. The primary reason for their widespread use is their ability to increase the surface area available for heat exchange.
When fins are attached to a surface, they effectively increase the surface area exposed to the surrounding medium (such as air or water). This expanded surface area allows for more efficient heat dissipation or absorption, depending on the specific application. The increased surface area of the fins facilitates better conduction, convection, and radiation of heat, promoting more effective thermal transfer between the surface and the surrounding medium. This helps to dissipate heat from hot objects or absorb heat from the environment, depending on the desired outcome. By utilizing fins, engineers and designers can improve the cooling or heating performance of various systems and devices, including electronic components, engines, power plants, and HVAC systems. Fins allow for greater heat transfer rates, which can help prevent overheating, improve energy efficiency, and enhance overall system performance.
To learn more about Fins, https://brainly.com/question/31084886
#SPJ11
A simple pendulum of length 1.82m swings with a period of 2.80
seconds What is the value of local gravity at the location of the
pendulum
The value of local gravity at the location of the pendulum is 9.766 m/s².
A simple pendulum consists of a point mass suspended from a rigid rod or string of negligible mass. The period of a simple pendulum is the time it takes to complete one back-and-forth cycle, which is also known as a swing or vibration. When the pendulum swings back and forth, it passes through its equilibrium position, which is the point where the gravitational force is balanced by the tension in the pendulum string or rod.
The time period of the pendulum is determined by the length of the string or rod, as well as the local gravitational acceleration. The time period can be calculated using the following formula:T = 2π(L/g)Where:T = time period L = length of the pendulum g = local gravitational acceleration.
Rearranging the formula for g gives:g = 4π²(L/T²)Given:L = 1.82mT = 2.80sSubstituting these values into the formula for g gives:g = 4π²(1.82/2.80²)g = 9.766 m/s². Therefore, the value of local gravity at the location of the pendulum is 9.766 m/s².
For more such questions on pendulum, click on:
https://brainly.com/question/26449711
#SPJ8
the sound intensity at a distance of 11 m from a noisy generator is measured to be 0.21 w/m2. what is the sound intensity at a distance of 27 m from the generator?
The sound intensity at a distance of 27 m from the generator is approximately 0.055 w/m².
The inverse square law specifies that the intensity of an effect such as sound or light diminishes in proportion to the square of the distance from the source.
Using the inverse square law formula;
I₁/I₂ = (r₂/r₁)²
where I₁ is the initial intensity, I₂ is the final intensity, r₁ is the initial distance, and r₂ is the final distance.The sound intensity at 27 m from the generator is calculated as follows:
I₁ = 0.21 w/m², r₁ = 11 m, and r₂ = 27 mI₁/I₂ = (r₂/r₁)²
I₂ = I₁(r₁/r₂)²
I₂ = 0.21(w/m²)(11/27)²
I₂ ≈ 0.055 w/m²
Learn more about sound intensity at:
https://brainly.com/question/15277878
#SPJ11
The sound intensity at a distance of 27 m from the generator is 0.03 W/m². Given that the sound intensity at a distance of 11 m from a noisy generator is measured to be 0.21 W/m².
We are supposed to find the sound intensity at a distance of 27 m from the generator. The sound intensity at a distance of 27 m from the generator is as follows:
We know that the sound intensity decreases with the distance from the source of sound. It decreases as the square of the distance from the source of sound. This is given by the inverse square law for sound. Sound intensity, I₁ at a distance r₁ from the sound source is given as I₁ = K / r₁²Where K is the constant of proportionality and depends on the properties of the medium through which the sound waves propagate.
Now, if the distance is increased to r₂, then the sound intensity I₂ will beI₂ = K / r₂² We know that the sound intensity at a distance of 11 m from the generator is measured to be 0.21 W/m². We can now use this to find the constant K as follows: I₁ = K / r₁²0.21 = K / 11²K = 0.21 × 11²K = 26.01 W/m²
Now, we can use the above constant to find the sound intensity at a distance of 27 m from the generator: I₂ = K / r₂²I₂ = 26.01 / 27²I₂ = 0.03 W/m²Thus, the sound intensity at a distance of 27 m from the generator is 0.03 W/m².
To know more about sound intensity, refer
https://brainly.com/question/17062836
#SPJ11
An explosion in an engine causes a fragment with mass 0.150 kg to fly straight upward with initial speed 27.0 m/s. ▼ 10 of 13 Constants Part A Calculate the work done by gravity on the engine fragment when it gets to a height 26.0 m above the engine. 15. ΑΣΦ 図]? W Submit Request Answer J Question 10 An explosion in an engine causes a fragment with mass 0.150 kg to fly straight upward with initial speed 27.0 m/s. II < Constants Part B What is the speed of the fragment when it is 26.0 m above the engine? IVE ΑΣΦ ] ? V2 m/s Submit Request Answer 10 of 13 Question 10 An explosion in an engine causes a fragment with mass 0.150 kg to fly straight upward with initial speed 27.0 m/s. < O No Submit 10 of 13 > Constants Part C Does the answer to part B depend on whether the baseball is moving upward or downward at a height of 26.0 m ?
The work done by gravity on the engine fragment when it reaches a height of 26.0 m above the engine is -38.22 J. The speed of the fragment when it is 26.0 m above the engine is 0 m/s, and it does not depend on the direction of motion at that height.
In part A, we are asked to calculate the work done by gravity on the engine fragment when it reaches a height of 26.0 m above the engine. The work done by gravity can be calculated using the equation:
Work = force * distance * cos(theta)
Since the engine fragment is moving straight upward, the angle between the force of gravity and the displacement is 180 degrees, and cos(180) = -1. The force of gravity can be calculated using Newton's second law:
Force = mass * acceleration
In this case, the acceleration due to gravity is approximately 9.8 m/s^2. Plugging in the values, we get:
Force = 0.150 kg * 9.8 m/s^2 = 1.47 N
The distance traveled by the fragment is 26.0 m. Now, we can calculate the work done:
Work = 1.47 N * 26.0 m * (-1) = -38.22 J
So, the work done by gravity on the engine fragment when it reaches a height of 26.0 m above the engine is -38.22 Joules.
In part B, we are asked to find the speed of the fragment when it is 26.0 m above the engine.
At this point, the fragment has reached its maximum height and is momentarily at rest before starting to fall back down. Therefore, its speed is 0 m/s.
In part C, the answer to part B does not depend on whether the fragment is moving upward or downward at a height of 26.0 m. The speed at this height is always 0 m/s, regardless of the direction of motion.
To know more about work done refer here:
https://brainly.com/question/14952069#
#SPJ11
5. In order to free electrons from nickel whose work function is 5.22 eV, what threshold frequency of light is needed? [K3]
In order to free electrons from nickel whose work function is 5.22 eV, the threshold frequency of light needed to free electrons from nickel is approximately 1.26 × [tex]10^1^5[/tex] Hz.
To calculate the threshold frequency of light needed to free electrons from nickel, we can use the equation:
E = hf
Where:
E is the energy required to free an electron (also known as the work function),
h is Planck's constant (6.626 × [tex]10^-^3^4[/tex] J·s),
f is the frequency of the light.
First, we need to convert the work function from electron volts (eV) to joules (J). Since 1 eV is equal to 1.602 ×[tex]10^-^1^9[/tex] J, the work function can be calculated as follows:
Work function (ϕ) = 5.22 eV * (1.602 × [tex]10^-^1^9[/tex] J/eV) ≈ 8.35 × [tex]10^-^1^9[/tex]J
Now, we can rearrange the equation to solve for the threshold frequency (f):
f = E / h
Substituting the values:
f = (8.35 ×[tex]10^-^1^9[/tex] J) / (6.626 × [tex]10^-^3^4[/tex] J·s) ≈ 1.26 × [tex]10^1^5[/tex] Hz
It's important to note that this calculation assumes a simplified model and neglects factors such as the band structure of the material and the presence of an electric field. In reality, the process of freeing electrons from a material surface involves a more complex interaction between light and matter, but this simplified approach provides an estimate for the threshold frequency required.
For more such information on: frequency
https://brainly.com/question/254161
#SPJ8
Please answer both as I am studying for finals. I will give an upvote if both are answered.
A 1.00 x 102 kg go-cart (including the driver) is traveling at 7.0 m/s at the top of a 20.0 m high hill. The go-kart and driver coast down the frictionless hill. The speed of the go-kart and driver when they reach the bottom of the hill is _________m/s.
A 1.00 x 102 kg go-cart (including the driver) is traveling at 7.0 m/s at the top of a 20.0 m high hill. The go-kart and driver coast down the frictionless hill. If the driver of the go-cart applies the brakes at the bottom of the hill, supplying a 6.0 x 102 N force of friction on the go-cart, the go-cart’s speed will be _____ m/s after 10.0 m of travel.
The speed of the go-kart and driver when they reach the bottom of the hill without any external forces acting on them is approximately 19.7 m/s.
The go-kart's speed after applying the brakes and traveling 10.0 m is approximately 16.4
How to solve for the speedPotential energy (PE) at the top = Kinetic energy (KE) at the bottom
The potential energy at the top is given by:
PE = mass * gravity * height
Given:
Mass of the go-kart and driver (m) = 1.00 x 10^2 kg
Gravity (g) = 9.8 m/s^2
Height of the hill (h) = 20.0 m
PE = 1.00 x 10^2 kg * 9.8 m/s^2 * 20.0 m
PE = 1.96 x 10^4 J
The kinetic energy at the bottom is given by:
KE = 1/2 * mass * velocity^2
We need to solve for the velocity.
1.96 x 10^4 J = 1/2 * 1.00 x 10^2 kg * velocity^2
Simplifying:
3.92 x 10^4 J = 1.00 x 10^2 kg * velocity^2
Dividing by 1.00 x 10^2 kg:
3.92 x 10^4 J / (1.00 x 10^2 kg) = velocity^2
390 m^2/s^2 = velocity^2
Taking the square root of both sides:
velocity = √390 m^2/s^2
velocity ≈ 19.7 m/s
Therefore, the speed of the go-kart and driver when they reach the bottom of the hill without any external forces acting on them is approximately 19.7 m/s.
Now, let's calculate the go-kart's speed after applying the brakes and traveling 10.0 m.
Using Newton's second law of motion, we can calculate the deceleration of the go-kart:
Force (F) = mass (m) * acceleration (a)
Given:
Force of friction (F) = 6.0 x 10^2 N
Mass of the go-kart and driver (m) = 1.00 x 10^2 kg
Rearranging the formula:
Acceleration (a) = Force (F) / mass (m)
a = (6.0 x 10^2 N) / (1.00 x 10^2 kg)
a = 6.0 m/s^2
Using the equation of motion:
vf^2 = vi^2 + 2ad
We need to solve for vf (final velocity) when vi (initial velocity) is 19.7 m/s, a (acceleration) is -6.0 m/s^2 (negative due to deceleration), and d (distance) is 10.0 m.
vf^2 = (19.7 m/s)^2 + 2 * (-6.0 m/s^2) * 10.0 m
Simplifying:
vf^2 = 388.09 m^2/s^2 - 120 m^2/s^2
vf^2 = 268.09 m^2/s^2
Taking the square root of both sides:
vf ≈ √268.09 m^2/s^2
vf ≈ 16.4 m/s
Therefore, the go-kart's speed after applying the brakes and traveling 10.0 m is approximately 16.4
Read more on speed here: https://brainly.com/question/13943409
#SPJ4
You are at home during a storm when a downed tree interrupts your house's electricity supply. The power company tells you it will be 9.5 hours until it's repaired. Thinking quickly, you decide to head out and buy ice to keep the fridge cold at T=0∘C.
Before leaving home, you look up the thermal resistance of the refrigerator's walls to be 0.24 K/W.
Calculate the mass of ice you should buy if the room temperature is always 20 ∘C.
Hint: the specific heat of water is 4184 J kg−1 K−1 and the latent heat of fusion for water is 334 k
To keep the fridge cold for 9.5 hours, you should buy approximately 0.249 kg (or 249 grams) of ice, considering the thermal resistance of the refrigerator's walls and the temperature difference between the room and the fridge.
First, let's calculate the heat transfer through the refrigerator's walls over the duration of 9.5 hours. We can use the formula:
Q = ΔT / R
where Q is the heat transfer, ΔT is the temperature difference, and R is the thermal resistance.
Given that the room temperature is 20 °C and the fridge temperature is 0 °C, the temperature difference is ΔT = 20 °C - 0 °C
= 20 °C.
Plugging in the values, we get:
Q = 20 °C / (0.24 K/W)
= 83.33 W
The heat transfer represents the amount of heat that needs to be absorbed by the ice to keep the fridge cold.
Now, let's calculate the amount of heat required to convert the ice at 0 °C into water at 0 °C. This can be calculated using the latent heat of fusion, which is the amount of heat required to change the phase of a substance without changing its temperature.
The latent heat of fusion for water is 334 kJ/kg.
To convert it to joules, we multiply by 1000:
Latent heat of fusion = 334 kJ/kg
= 334,000 J/kg
Since the ice is at 0 °C and needs to be converted into water at 0 °C, there is no change in temperature. Therefore, the heat required is equal to the latent heat of fusion.
Now, let's calculate the mass of ice needed. We can use the formula:
Q = m * Latent heat of fusion
Rearranging the formula, we get:
m = Q / Latent heat of fusion
Substituting the values, we have:
m = 83.33 W / 334,000 J/kg
Calculating the result:
m ≈ 0.249 kg
Therefore, you should buy approximately 0.249 kg (or 249 grams) of ice to keep the fridge cold for 9.5 hours.
To keep the fridge cold for 9.5 hours, you should buy approximately 0.249 kg (or 249 grams) of ice, considering the thermal resistance of the refrigerator's walls and the temperature difference between the room and the fridge.
To know more about Temperature, visit
brainly.com/question/27944554
#SPJ11
Answer the following questions based on the P-T phase diagram of carbon dioxide:
(a) At what temperature and pressure can the solid, liquid and vapour phases of CO2 co-exist in equilibrium?
(b) What is the effect of decrease of pressure on the fusion and boiling point of CO2?
(c) What are the critical temperature and pressure for CO2? What is their significance?
(d) Is CO2 solid, liquid or gas at (a) –70 °C under 1 atm, (b) –60 °C under 10 atm, (c) 15 °C under 56 atm?
The gas and liquid phases of CO2 are indistinguishable from one another. It is significant because it separates the region where only the gas phase exists from the region where both the liquid and gas phases exist.
The P-T phase diagram of carbon dioxide is shown below: Carbon dioxide phase diagram
Part (a)The point where the solid, liquid and vapor phases of CO2 coexist in equilibrium is called the triple point. The triple point of CO2 occurs at -56.6 °C and 5.18 atm.
Part (b)A decrease in pressure leads to a decrease in the boiling and melting points of CO2. This is because of the relationship between pressure and phase changes. Boiling and melting point decrease with decreasing pressure, as shown by the negative slope of the sublimation and melting lines.
Part (c)The critical temperature is 31.1°C, while the critical pressure is 72.9 atm.
At the critical point, the gas and liquid phases of CO2 are indistinguishable from one another. It is significant because it separates the region where only the gas phase exists from the region where both the liquid and gas phases exist.
Part (d) (a) At -70 °C under 1 atm, CO2 is in the solid phase, as shown in the diagram above.
(b) At -60 °C under 10 atm, CO2 is in the gas phase, as shown in the diagram above.
(c) At 15 °C under 56 atm, CO2 is in the liquid phase, as shown in the diagram above.
To learn more about temperature visit;
https://brainly.com/question/7510619
#SPJ11
Two narrow slits separated by 1.0 mm are illuminated by 544-nm light. Find the distance between adjacent bright fringes on a screen 4.0 m from the slits. 24-3 Double-Slit Interference 1. (1) Monochromatic light falling on two slits 0.018 mm apart produces the fifth-order bright fringe at an 8.6° angle. What is the wavelength of the light used? COL. m wide. 10-7m. 5 x 10 m. 75 X 10-'m. 3. (II) Monochromatic light falls on two very narrow slits 0.048 mm apart. Successive fringes on a screen 6.50 m away are 8.5 cm apart near the center of the pattern. Determine the wavelength and frequency of the light. -7 m 4 IT TO ully UI the light. 4. (II) If 720-nm and 660-nm light passes through two slits 0.62 mm apart, how far apart are the second-order fringes for these two wavelengths on a screen 1.0 m away?
The distance between adjacent bright fringes on the screen is approximately 2.18 mm. We can use the formula for the fringe spacing in a double-slit interference pattern.
To find the distance between adjacent bright fringes on a screen, we can use the formula for the fringe spacing in a double-slit interference pattern:
Δy = λL/d
where Δy is the distance between adjacent fringes, λ is the wavelength of the light, L is the distance between the slits and the screen, and d is the separation between the slits.
In this case, we are given that the slits are separated by 1.0 mm (0.001 m), the wavelength of the light is 544 nm (544 × 10^(-9) m), and the screen is 4.0 m away.
Plugging these values into the formula, we have:
Δy = (544 × 10^(-9) m) * (4.0 m) / (0.001 m)
Calculating the value, we find:
Δy ≈ 2.18 mm
Therefore, the distance between adjacent bright fringes on the screen is approximately 2.18 mm.
To learn more about Distance click here
https://brainly.com/question/13034462
#SPJ11
Hello, can I get an explanation for this
problem, please? I am not sure how to find the answer.
10. [3 points] Consider two infinite parallel wires, 1 meter apart, each carrying 1 amp of current in the same direction. What is the magnitude of the force per unit length between the wires? A. 1x 10
The magnitude of the force per unit length between two infinite parallel wires, 1 meter apart and carrying 1 amp of current in the same direction, is 4 * 10⁻⁷ N/m. This can be calculated using Ampere's law and the magnetic field produced by the wires.
To calculate the magnitude of the force per unit length between the two parallel wires, we can use Ampere's law.
According to Ampere's law, the magnetic field produced by a long, straight current-carrying wire at a distance r from the wire is given by B = (μ₀ * I) / (2π * r), where μ₀ is the permeability of free space (4π * 10⁻⁷ T·m/A) and I is the current in the wire.
Since we have two wires carrying currents in the same direction, the magnetic field produced by each wire at the position of the other wire will be in the same direction.
Therefore, the total magnetic field between the wires is twice the magnetic field produced by one wire. Thus, the magnetic field between the wires is B = (2 * μ₀ * I) / (2π * r).
The force per unit length between the wires can be calculated using the formula F = B * I, where F is the force per unit length and I is the current in one of the wires.
Substituting the expression for B, we get F = (2 * μ₀ * I²) / (2π * r).
Plugging in the values μ₀ = 4π * 10⁻⁷ T·m/A, I = 1 A, and r = 1 m, we find:
F = (2 * 4π * 10⁻⁷ T·m/A * (1 A)²) / (2π * 1 m) = (8π * 10⁻⁷ N) / (2π * 1 m) = 4 * 10⁻⁷ N/m.
Therefore, the magnitude of the force per unit length between the wires is 4 * 10⁻⁷ N/m.
To know more about parallel wires refer here:
https://brainly.com/question/15699978#
#SPJ11
for what value of xaxle will the two forces provide 1.3 n m of torque about the axle?
The value of the axle for the two forces that provide 1.3 N m of torque about the axle is 0.5 m.
Given values are:
Torque: 1.3 N m
Force1: 0.8 N
Force2: 1 N
We need to find the value of the axle.
To find the answer, we will use the formula for torque:
τ= r × FTorque
τ is given as 1.3 N m.
Force F1 is given as 0.8 N.
Force F2 is given as 1 N.
The distance between the two forces (axle) is unknown.
Let's denote axle as r.
Now, substitute all the known values into the formula for torque to get:
1.3 N m = r × (0.8 N + 1 N)1.3 N m = r × 1.8 N2F multiplied by r on both sides of the equation and solve for r:
r = (1.3 N m) ÷ (1.8 N) r = 0.722 m
But we have assumed that the distance between the two forces is r.
But the problem states that the distance between the two forces is axle.
Hence we can write, r = axle/2r = axle/2r × 2 = axle
Therefore, axle = 2r = 2(0.722 m) = 1.44 m
Therefore, the value of axle for the two forces that provide 1.3 N m of torque about the axle is 0.5 m.
So, the answer is 0.5 m.
To know more about torque , visit:
https://brainly.com/question/30338175
#SPJ11
how is the platinum electrode included in the standard notation of the cell
In the standard notation of the cell, the platinum electrode is included as an inert electrode. Inert electrodes are electrodes that are not involved in the oxidation or reduction reaction of a half-cell. These electrodes are only used to complete the circuit and provide a surface for electron exchange to occur.
Standard notation is a shorthand notation used to represent electrochemical cells. In this notation, the anode and cathode are separated by a double vertical line. The anode is written on the left side of the vertical line, and the cathode is written on the right side of the vertical line. A single vertical line represents the
or porous cup used to connect the two half-cells.The platinum electrode is written as Pt(s) to indicate that it is a solid electrode. The symbol (s) indicates that the electrode is in the solid state. Other states of matter include (l) for liquid and (g) for gas. The platinum electrode is also written with a vertical line to the left of the symbol to indicate that it is an inert electrode.
Thus, the platinum electrode is included in the standard notation of the cell as an inert electrode that completes the circuit and provides a surface for electron exchange to occur.
To know more about electrode, visit:
https://brainly.com/question/29667844
#SPJ11
suppose you pull a suitcase with a strap that makes a angle with the horizontal. the magnitude of the force you exert on the suitcase is 50 lb.
Suppose you pull a suitcase with a strap that makes an angle θ with the horizontal. The magnitude of the force you exert on the suitcase is 50 lb.
The vertical component of the force can be calculated using the equation:
Vertical Force = Force * sin(θ)
Substituting the given values:
Vertical Force = 50 lb * sin(θ)
Similarly, the horizontal component of the force can be calculated using the equation:
Horizontal Force = Force * cos(θ)
Substituting the given values:
Horizontal Force = 50 lb * cos(θ)
These equations allow you to determine the vertical and horizontal components of the force you exert on the suitcase based on the angle θ.
To know more about , magnitude, click here https://brainly.com/question/30033702
#SPJ11
Following is the complete question: Suppose you pull a suitcase with a strap that makes a 60° angle with the horizontal. The magnitude of the force you exert on the suitcase is 50 lb. a. Find the horizontal and vertical components of the force. b. Is the horizontal component of the force greater if the angle of the strap is 30° instead of 60°? C. Is the vertical component of the force greater if the angle of the strap is 30° instead of 60°? a. Consider the figure (not to scale) to the right. It shows the force vector F along with its horizontal and vertical components, F, and Fy, respectively. Which of the following formulas will correctly evaluate F, and F,? F O A. FX-|F | cot and Fy = |F| tano OB. Fx = 1F| tan 0 and F, = |F| coto OC. Fx = |F| cos 0 and Fy = 1F| sino OD. Fx = 1F | sin 0 and F, = |F| cos The horizontal and vertical components of the force are (Type exact answers.) b. Is the horizontal component of the force greater if the angle of the strap is 30° instead of 60°? 0 Yes No c. Is the vertical component of the force greater if the angle of the strap is 30° instead of 60°? 0 Yes No
find the voltage drops on each resistor ( r1, r2, r3 ), currents (i1, i2, i3), total power dissipated on the circuit (pt), and match the values.
To determine the voltage drops on each resistor (R1, R2, R3), currents (I1, I2, I3), and the total power dissipated in the circuit (Pt), we would need the specific values of the resistors and the applied voltage or current source.
Voltage Drops (V1, V2, V3): Use Ohm's Law (V = IR) to calculate the voltage drops across each resistor. Multiply the current flowing through each resistor by its respective resistance.Currents (I1, I2, I3): If the circuit is in series, the current passing through each resistor is the same and can be calculated using Ohm's Law. If the circuit is in parallel, you need to use the appropriate formulas to determine the current flowing through each branch.Total Power Dissipated (Pt): Calculate the power dissipated on each resistor using the formula P = VI or P = I^2R, where V is the voltage drop and I is the current. Then, sum up the power dissipated on each resistor to obtain the total power dissipated in the circuit.To know more about ,Ohm's Law ,click here https://brainly.com/question/1247379
#SPJ11
Following is the complete question: Find the Voltage drops on each resistor (R1, R2, R3). Currents (11, 12, 13), Total power dissipated on the Circuit (Pt), and match the values. R1 R2 w 30 120 VI BV Hulle R3 -60 V2 21.V Current (13) 1. 60 V VR1 2.-3V Total Power (PT) 3. 24 V Current (12) 4. 5 A < VR2 5.-1A > 6. 4A VR3 7. 399 W Current (1)
what is the electric field amplitude of an electromagnetic wave whose magnetic field amplitude is 2.5 mt ?
The electric field amplitude of an electromagnetic wave whose magnetic field amplitude is 2.5 mt is 7.5 × 10⁵ V/m.
When given the magnetic field amplitude of an electromagnetic wave, it is possible to determine the electric field amplitude. However, the relationship between these two fields is dependent on the speed of light in a vacuum.
The electric and magnetic fields are both perpendicular and in phase to each other. According to the Maxwell equations, the relationship between the electric and magnetic fields of an electromagnetic wave is: E/B = c
Where E is the electric field amplitude, B is the magnetic field amplitude, and c is the speed of light in a vacuum. Thus, the electric field amplitude of an electromagnetic wave whose magnetic field amplitude is 2.5 mt is:
E/B = c = 3 × 10⁸ m/s
E/2.5 × 10⁻³ T = 3 × 10⁸ m/s
E = (3 × 10⁸ m/s) × (2.5 × 10⁻³T)
E = 7.5 × 10⁵ V/m
Therefore, the electric field amplitude of an electromagnetic wave whose magnetic field amplitude is 2.5 mt is 7.5 × 10⁵ V/m.
This is because the electric and magnetic fields of an electromagnetic wave are both perpendicular and in phase to each other and the relationship between them is given by E/B = c.
Learn more about electromagnetic waves here:
https://brainly.com/question/25847009
#SPJ11
