When two atoms collide to create a heavier atom, such as when two hydrogen atoms combine to produce one helium atom, this process is known as fusion. The sun is powered by a similar mechanism, which also generates vast quantities of energy.
Which better describes nuclear fusion?Nuclear fusion is the process by which two light atomic nuclei unite to produce a single heavier one while releasing enormous quantities of energy.
The sun and the stars are both powered by fusion. It is the process by which two hydrogen atoms fuse to generate a helium atom. A portion of the hydrogen's mass is changed into energy during the process.
Fusion and fission are both caused by the strong force.
Learn more about Nuclear fusion refer
https://brainly.com/question/17870368
#SPJ4
the toxic chemicals present in the soil can decrease soil fertility and therefore decrease in the soil yield. the contaminated soil is then used to produce fruits and vegetables which lacks quality nutrients and may contain some poisonous substance to cause serious health problems in people consuming them.
The toxic chemical compounds gift in the soil can lower soil fertility and therefore lower the soil yield.
chemical compounds such as lead can harm the anxiety system, inclusive of the mind. Contaminants may also be absorbed via the pores and skin. Creosote is a not unusual cloth used to hold timber in the USA. This complicated mixture of chemical compounds can leach out of treated wood and contaminate the soil.
Soil toxicities are constraints on the useful resources available to the crop. Toxicities in the subsoil seem to perform through restricting root boom, the most important outcome of which within the Australian environment is reduced yield because of reduced water availability to the crop (Dang et al., 2008).
Learn more about toxic chemical here
https://brainly.com/question/20737533
#SPJ4
a researcher wants to make a 99% confidence interval for a population mean. she wants the margin of error to be within 4.7 of the population mean. the population standard deviation is 18.60. the sample size that will yield a margin of error within 4.7 of the population mean is
The sample size that will yield a margin of error within 4.7 of the population mean is 104.
A standard deviation (or σ) is a measure of how dispersed the facts is in terms of the suggestion. Low popular deviation method records are clustered around the imply, and excessive well-known deviation shows statistics are more spread out.
The same old deviation is a degree of the quantity of variant or dispersion of a hard and fast of values. A low fashionable deviation indicates that the values tend to be near the mean of the set, whilst a high general deviation indicates that the values unfold out over a much broader variety.
Calculation:-
z = 2.576
σ = 18.22
E = z* (σ / √n )= 4.7
4.7 = 2.576 × ( 18.22 / √n )
√n = 2.576 × ( 18.22 / 4.7 )
√n = 10.2032
n = 104.105
n ≅ 104
Learn more about standard deviation here:-https://brainly.com/question/28561334
#SPJ4
what is the reactance of an inductor with an inductance of 2.90 hh at a frequency of 85.0 hzhz ? express your answer in ohms.
At a frequency of 85.0 Hz, the reactance of a capacitor with a capacitance of 3.80106 F is 492.8 Ω.
X = 1/ C [tex]\omega[/tex] where [tex]\omega[/tex] is angular frequency
Where C = Capacitance = 3.80×10−6 F
[tex]\omega[/tex] = angular frequency = 2\πF
= 2(22/7)85
= 534 rad/s
Therefore X = 1/[3.80×10−6 F x 534]
= 492.8 Ω
By building up electric charges on two nearby surfaces that are isolated from one another, a capacitor is a device that stores electrical energy in an electric field. It is a two-terminal passive electronic component. Capacitance is the name given to a capacitor's effect. A capacitor is a thing, not a thing with a unit. The capacitor's capacitance is defined as the ratio of the charge held in either of its conductors to the potential difference between them. Farads are used as the SI unit for capacitance.
Learn more about capacitor here:
https://brainly.com/question/14257872
#SPJ4
calculate the molarity of a barium hydroxide solution if you used 41.65 ml of it to neutralize 1.190 g of potassium hydrogen phthalate.
Molarity of barium hydroxide is 0.0700M.
What is molarity?
The concentration of a solution is expressed in terms of molarity. The quantity of moles of solute (the substance dissolved) per litre of solution is known as molarity, often referred to as molar concentration.Molecules per cubic decimeter, sometimes known as mol dm-3 or simply M, are the units of molarity. The cubic decimeter and litre are interchangeable units, and concentrations are sometimes expressed as moles per litre (mol/l) in older texts.Chemists used to commonly refer to concentrations as (weight of solute)/ (volume). However, molar concentrations are almost typically utilised because the mole is now the most popular unit of measurement for quantity in chemistry.To know more about molarity, click the link given below:
https://brainly.com/question/19517011
#SPJ4
draw the major product from the following reaction: 1-bromo-1-methylcyclohexane triethylamine ( et3n: ).
1-bromo-1-methylcyclohexane is an alkyl halide which is treated with strong base triethylamine to give the elimination product 1-methylcyclohex-ene, which is a major product.
When an alkyl halide is treated with a strong base and some heat is also supplied to the reaction.
The beta-hydrogen of the alkyl halide will be abstracted by the strong base. And it gives alkene as a product. This reaction results in the removal of a small molecule. Such a reaction is termed as an elimination reaction.
Here, 1-bromo-1-methylcyclohexane is an alkyl halide which is treated with strong base triethylamine to give the elimination product 1-methylcyclohex-ene.
To learn more about elimination reaction visit the link- https://brainly.com/question/17101814
#SPJ4
Is dilation a Nonrigid transformation?.
Yes, dilation is a Nonrigid transformation.
A dilation and curettage procedure, which is also called a D&C, is a surgical procedure in which the cervix or the lower, narrow part of the uterus is dilated or expanded so that the uterine lining (endometrium) can be scraped with a curette (spoon-shaped instrument) to remove abnormal tissues.
Non-Rigid Transformations are those transformations that are not rigid. Non-Rigid Transformations actually change the structure of our original object. For example, it can make our object bigger or smaller using scaling. Or, it can be "pushed" up or to the side using shearing. Basically, non-rigid transformations allows the object to increase or decrease in size.
Hence Dilation is a example of Nonrigid transformation
To know more about Nonrigid transformation
https://brainly.com/question/2063313
#SPJ4
which three molecules contain sp3 hybridized oxygen atoms? choose one or more: a.vanillin b.glycerol c.hydrogen sulfide d.chlorine e.carbon dioxide f.ozone g.carvone h.ethylene i.acetone
The compound that contains [tex]sp^3[/tex] hybridized oxygen atoms is vanillin.
What is hybridization?We know that it is important that we are able to know the kind of hybridization that has occurred in atoms in a compound. This is because, the kind of hybridization is caused by the way that the orbitals in the atom are combined so as to obtain the orbitals that are suitable for bonding.
The oxygen atoms that are [tex]sp^3[/tex] hybridized is the carbon atoms that would contain only a single bond. We would now have to look at the bonds in the compound to know the one that contains only single bonds to an oxygen atom and this occurs in vanillin.
Learn more about hybridization:https://brainly.com/question/14140731
#SPJ1
which of the following is true for completion of the etching process? group of answer choices do not rinse. rinse thoroughly and then dry. do not dry. surface should appear shiny white. it is no longer necessary to keep isolated after etching.
For the etching process the correct statement is to rinse thoroughly and then dry.
Etching is traditionally the process of using strong acid to cut into the unprotected parts of a metal surface in order to create a design in the incised of the metal. In modern manufacturing, other chemicals may usually be used on other types of materials as well.
Etching occurs when the acid or base is contacted with a specimen surface because of the difference in rate of attack of the various phases present and also their orientation. The etching process is usually accomplished by merely applying the appropriate solution to the specimen surface for several seconds to also several minutes.
After etching for 20 seconds, the surface needs to be rinsed with water to remove the acid completely. Suction and air should be used to thoroughly to dry the etched tooth surface. Again, it is extremely important to avoid salivary contamination.
To know more about etching process
https://brainly.com/question/28346815
#SPJ4
Iron and calcium metal ions are known to chelate with EDTA. Suppose the water used in preparation of your zinc chloride solution in the volumetric flask contained some levels of Pb2+ or Ca²+ metal. How will this affect the following? Explain your answers. (8 pts) 0.011 Consumed will increase ara result At of moles of EDTA increase I with Pb 2+ & Ca2+, Volume of EDTA solution a) The number of moles of EDTA calculated. The Nand of the moles of EDTA calculated will increase complexing As the EDTA Since Pb 2+ & Cat react with FOTA with 1/4 mou mamo, Hot roles of EDTA will increase Experiment 8 | Titration to Betermine the empirical Formats of zinc Chloride: Post-Lab 143
The volume of EDTA will increase since it binds with Pb²⁺ and calcium ions, where the number of moles of Zn calculated will increases and thus, error occurs in the determination of concentration.
What is EDTA?EDTA is ethylene diamine tetra acetic acid. It is a hexadentate ligand that easily binds with metals such as calcium, ions, zinc, cobalt, nickel etc. Therefore, EDTA is used as the complexing agent in complexometric titration.
EDTA forms chelate complex with metals which leads to extra stability for the metal complexes. In complexometric titrations, EDTA first binds to the indicator and then starts to bind with the metal preferentially where the indicator is released giving the color change.
EDTA can selectively bind with some metal compared with other metals. If the water used in the Zn - analysis contains lead and calcium, EDTA preferentially binds with calcium and thus more volume of EDTA will be consumed, leading to erroneous calculation in the number of moles of Zn.
To find more on EDTA, refer here:
https://brainly.com/question/26556460
#SPJ1
What structure is similar to ATP?.
of the following lists of electron transport compounds, which one lists them in order from the one containing electrons with the highest free energy to the one containing electrons with the lowest free energy? note that not all electron transport compounds in the electron transport chain are listed. of the following lists of electron transport compounds, which one lists them in order from the one containing electrons with the highest free energy to the one containing electrons with the lowest free energy? note that not all electron transport compounds in the electron transport chain are listed. fadh2 -- fe-s of complex ii -- q -- fe-s of complex iii -- cyt c -- cyt a of complex iv -- o2 o2 -- cyt a of complex iv -- cyt c -- fe-s of complex iii -- q -- fe-s of complex ii -- fadh2 fmn of complex i -- nadh -- fe-s of complex iii -- cyt b of complex iii -- cyt c -- cyt a of complex iv -- o2 fadh2 -- fe-s of complex ii -- fe-s of complex iii -- q -- cyt a of complex iv -- cyt c -- o2
Answer:
Explanation:Mastering Biology answer
identify how that the liver glycolytic enzyme hexokinase iv is regulated and compare this with the hexokinase i isozyme found in muscle (2 pts).
The liver glycolytic enzyme hexokinase IV is regulated as the protein inhibitor of hexokinase is a nuclear binding that takes the hexokinase IV in liver. hexokinase I isoenzyme found in muscles consume the glucose and utilizes it for the production of energy.
The hexokinase IV in liver will maintains the blood glucose depending on the blood glucose concentration. the hexokinase I isoenzyme found in muscles consume the glucose and utilizes it for the production of energy.
Thus, The liver glycolytic enzyme hexokinase IV is regulated as the protein inhibitor of hexokinase is a nuclear binding that takes the hexokinase IV in liver. hexokinase I isoenzyme found in muscles consume the glucose and utilizes it for the production of energy.
To learn more about hexokinase here
https://brainly.com/question/15580505
#SPJ4
what is the empirical formula for ethyl fluoride if the compound contains 49.97% carbon, 10.51% hydrogen, and 39.52% fluorine by mass?
Answer:
If the empirical formula for ethyl fluoride compound contains 49.97% carbon, 10.51% hydrogen, and 39.52% fluorine by mass so that means it would be C2H5F.
What are the four 4 most common modes of entry for chemicals?.
There are four most common routes of chemical entry in our body-
Skin (or eye) contact, inhalation (breathing), injection and swallowing (ingestion or eating).
Chemical do harm our health, it must first come into contact or enter the body, and it have some biological effect on the body also.
There are four most common routes of chemical entry in our body-
Skin or eye contact- Chemicals, when contacted, can pass through the skin into the blood stream. Example- eyes may also be a route of entry.
Inhalation (breathing)- Breathing of contaminated air is the most common mode of chemicals entry in workplace.
Injection- Rarerly occur at workplaces, but it can occur when a sharp object like needle punctures the skin and injects a chemicals directly into the bloodstream.
Swallowing/ingestion or eating)- chemicals may be swallowed accidentally in workplace if food, hands, or cigarettes are contaminated.
To learn more about chemical entry visit the link- https://brainly.com/question/25553246
#SPJ4
What is the pattern when we count by 10s?.
When you count in tens, a pattern is formed by the numbers. The last digit of each integer is zero. The initial few digits are identical to the numbers while counting (1, 2, 3, 4, 5, etc.). The results of this pattern are 10, 20, 30, 40, 50, etc.
TENS should be utilized when?According to studies, using TENS for at least 30 minutes while being active is the best strategy for treating chronic pain. When you're resting, lying down, or just sitting motionless, it works less well.
What purposes do TENS serve?A modest electrical current is used in transcutaneous electrical nerve stimulation (TENS), a technique for reducing pain. A TENS unit is a compact device.
To know more about Tens visit:
https://brainly.com/question/29367132
#SPJ4
strontium metal is responsible for the red color in fireworks. fireworks manufacturers use strontium carbonate, which can be produced by combining strontium metal, graphite (c), and oxygen gas. the formation of one mole of srco3 releases 1.220 x 10 3 kj of energy. (a) Write a balanced thermochemical equation for the reaction.
(b) What is ΔH when 10.00 L of oxygen at 25°C and 1.00 atm are used by the reaction?
a)A balanced thermochemical equation is- 2Sr+2C+3O₂=2SrCO₃
b)The value of ΔH when 10.00 L of oxygen at 25°C and 1.00 atm are used is 498.655 kJ.
Now, we know very well that strontium carbonate is made up of strontium metal, graphite(c) and oxygen.
We need to write the balanced chemical equations which is defined as number of moles of each of reactants is to be equal on both sides of equation.
So, the balanced chemical equation is - 2Sr+2C+3O₂=2SrCO₃
b)For calculating the ΔH,we need to find the number of moles of SrCO₃ are involved in chemical equation.
We know very well ideal gas equation as
PV=nRT
where
P is the pressure,V is the volumen is the number of molesR is gas constantT is temperature.Now, we have Volume(V)=10L,temperature=25°C=C+273=298K,
Pressure=1 atm, gas constant(R)=0.0821atmL/K
So, on putting each of the values in above formula,we get
=>1×10 = n×0.0821×298
=>n=10/(24.46)
=>n=0.4=4/10moles.
Now, we are given that one mole of SrCO₃ produces 1.220 x 10³ kj of energy.
So,4/10 mole of SrCO₃ produces =(4/10)×1.220 x 10³ = 498.655 kJ.
To know more strontium, visit here:
https://brainly.com/question/19298437
#SPJ4
What are the observed changes in the climate system?.
Observed changes are frequency of extreme events like drought, rising in temperature and ocean level, reduction of snow, storms in tropical regions etc.
Observed changes over the twentieth century include increases in temperature global air and ocean, rising global sea levels, long-term sustained widespread reduction of ice cover and snow and changes in atmospheric circulation and ocean circulation. And also regional weather patterns, which influence seasonal rainfall conditions. Frequency of extreme events are Increasing. Droughts are longer and more extreme around the world. Temperatures are increasing world-wide due to greenhouse gases trapping more heat in the atmosphere. Storms in tropical regions becoming more severe due to warmer ocean water temperatures.
To learn more about climate change visit the link- https://brainly.com/question/1789619
#SPJ4
Which of the following would be the best way to isolate a pure compound that is dissolved in an organic solvent?a) react with activated carbonb) recrystallize and then filter after coolingc) rotovap to remove the solventd) extraction with water
The following would be the best way to isolate a pure compound that is dissolved in an organic solvent is rotovap to remove the solvent.
What is meant by organic solvent ?Chemicals with a carbon structure known as organic solvents have the ability to disperse or dissolve one or more other compounds. Organic solvents have the potential to be neurotoxins, genital poisons, and carcinogens. The organic solvents benzene, carbon tetrachloride, and trichloroethylene are carcinogenic.
The boiling point of organic solvents is low – Organic solvents are known to have very low boiling points. They are extremely volatile as a result of their low boiling point. Organic solvents are colourless liquids with a reduced molecular weight. They are also transparent liquids.
Certain materials and substances can be dissolved with the use of organic solvents. Pharmaceuticals, footwear, paints, varnishes, and adhesives are just a few industries that frequently use organic solvents in their production. Typically, organic solvents are used in manufacturing to dissolve materials.
To learn more about organic solvent refer to:
https://brainly.com/question/28850026
#SPJ4
Why must chemical equations be balanced?
Choose all that apply.
Choose all that apply.
In a balanced chemical equation, the coefficients in front of each reactant and product allow us to predict whether the given reaction is possible or not.
In a balanced chemical equation, the coefficients in front of each reactant and product allow us to predict whether the reaction requires a catalyst or not.
In a balanced chemical equation, the coefficients in front of each reactant and product allow us to predict the amount of product that can form from a given amount of reactant.
In a balanced chemical equation, the coefficients in front of each reactant and product allow us to predict how much of one reactant is required to react with a given amount of another.
In a balanced chemical equation, the coefficients in front of each reactant and product allow us to predict how much reactants are required to form a given amount of products.
Because matter cannot be generated or destroyed through chemical reactions, all chemical equations must be balanced. When some substances convert chemically into other others, a chemical reaction takes place.
What is an example of a chemical equation?Chemical equations serve to represent the transformation of reactants into products. For instance, the combination of iron (Fe) and sulfur (S) results in iron sulfide (FeS). S(s) + Fe(s) = FeS (s) The + sign denotes an iron-sulfur reaction.
What is a simple chemical equation?A chemical equation is a symbol- and formula-based symbolic representation of a chemical reaction, with the reactant entities given on the left side and the product entities given on the right. Examples are NaOH+HClNaCl+H2O.
To know more about chemical equations visit:-
https://brainly.com/question/28294176
#SPJ4
When working in the fume hood, it is important to make an effort to minimize Choose... Only keep items in the hood if they are being used for Choose... Do not Choose... - chemicals in the fume hood unless instructed to do so.
When working in the fume hood, it is important to make an effort to a) minimize clutter and only keep items in the hood if they are being used.
A fume hood can be described as a ventilation hood present inside labs where experiments are done using hazardous substances such that they are prevented from inhalation by the researcher.
As the substances being researched in a fume hood are hazardous, it is important that only those chemicals be kept inside the fume hood that is being used by the researcher at that time. Otherwise, it could happen that these chemicals might react with each other and prove to be more toxic. Special care needs to be taken when working with the chemicals inside the fume hood.
Although a part of your question is missing, you might be referring to this question:
Choose the best option:
When working in the fume hood, it is important to make an effort to minimize
a) minimize clutter and only keep items in the hood if they are being used
b) chemicals in the fume hood unless instructed to do so.
To learn more about fume hood, click here:
https://brainly.com/question/26275078
#SPJ4
no2 and co2 have a similar molecular weight. which gas would you predict to deviate from an ideal gas? justify your answer.
NO2 deviates further from the behavior of an ideal gas than CO2 for the reasons mentioned above. Intermolecular interactions between gas particles are known to cause gases to behave differently from how they should.
A perfect gas is what?Intermolecular interactions between gas particles are known to cause gases to behave differently from how they should. The extent of such intermolecular interaction determines how far the gas deviates from the ideal gas law.CO2 has dipoles that cancel out, therefore even though it lacks a dipole moment, it is not actually a polar molecule. Contrary to NO2, which has a dipole moment and higher intermolecular interaction, this.NO2 deviates further from the behavior of an ideal gas than CO2 for the reasons mentioned above.To learn more about Ideal gas law refer to:
https://brainly.com/question/27870704
#SPJ4
a proton is projected into a magnetic field that is directed along the positive x axis. find the direction of the magnetic force exerted on the proton for each of the following directions of the proton's velocit
Positive and negative tow directions are the magnetic field's directions, and there is no force present.
What are protons in an atom?The nucleus is formed when the atom wraps it around proton. All other elements, including helium, have neutrons in addition to protons in their nuclei. The neutrons serve to hold the atom together whereas the positive charges protons have a tendency to reject one another.
What are an electron and a proton?A atom with a negative electrode is an electron. A hydrogen is an unit of matter with the a positive charge. The strong nuclear force holds protons together in the nucleus of an atom. A type type subatomic particle without charge is the neutron (they are neutral).
To know more about Proton visit:
https://brainly.com/question/1252435
#SPJ4
The complete question is-
A proton is projected into a magnetic field that is directed along the positive x axis. Find the direction of the magnetic force exerted on the proton for each of the following directions of the protons velocity:
(a) the positive y direction,
(b) the negative y direction,
(c) the positive x direction.
Does hydrogen need a full octet?.
Both helium and hydrogen do not adhere to the octet rule and require two electrons in the valence shell in order to be stable. They just need to occupy the s² orbital since they lack p-orbitals.
The main-group elements have the propensity to connect in such a way that each atom has eight electrons in its valence shell, giving it the same electronic structure as a noble gas. This is reflected in the theory behind the octet rule, a chemical rule of thumb. Although the rule is more broadly applicable to the s-block and p-block of the periodic table, it is most relevant to carbon, nitrogen, oxygen, and halogens. There are other laws, such as the duplet rule for hydrogen and helium or the 18-electron rule for transition metals, that apply to different elements.
As seen on the right for carbon dioxide, a Lewis electron dot diagram can be used to count the valence electrons. the pair of electrons that the two atoms in a covalent bond share.
Learn more about octet rule here:
https://brainly.com/question/865531
#SPJ4
identify the two unique common elementary steps in the above mechanism, by sorting them in the order in which they take place in the mechanism.
The two unique common elementary steps in the above mechanism are nucleophilic elimination and nucleophilic addition.
As we can see in the first step of the reaction (reaction attached) iodine (I) is attached to the compound. As we know that iodine is a good leaving group so it leaves easily with electrons. As it takes the bond electrons and becomes I⁻ so it is a nucleophilic elimination reaction.
In the second step of the reaction, the lone pair of electrons of nitrogen are attacking the carbocation, so we can call it a nucleophilic addition reaction. So the first step is nucleophilic elimination and the second step is nucleophilic addition.
The complete question is attached.
You can also learn about nucleophilic elimination from the following question:
https://brainly.com/question/12995687
#SPJ4
What is the research all about Brainly?.
Research is a systematic inquiry process that includes data collection, documentation of critical information, and analysis and interpretation of that data/information.
The process of discovering new knowledge is known as research. This knowledge can be the development of new concepts or the advancement of existing knowledge and theories, resulting in a previously unknown understanding. Humanity advances through research. Curiosity fuels it: we become curious, ask questions, and immerse ourselves in learning everything there is to know. Learning is flourishing. Without curiosity and research, progress would stall and our lives as we know them would be drastically altered.
To learn more about research please click on below link
https://brainly.com/question/18723483
#SPJ4
write the condensed (noble-gas) electron configuration of chromium. for multi-digit superscripts or coefficients, use each number in succession.
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the electronic configuration of chromium is [Ar] 3d⁵ 4s¹.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
The systematic distribution of electrons in the various atomic orbitals is called its electronic configuration. The atomic number of chromium is 24. The electronic configuration of chromium is [Ar] 3d⁵4s¹. 1,2,3 represents the number of shells and s and d represents the orbitals. The superscripts represents the number of electrons in each orbitals.
Therefore, the electronic configuration of chromium is [Ar] 3d⁵4s¹.
To know more about element, here:
brainly.com/question/8460633
#SPJ1
acid chlorides react with grignard reagents to yield tertiary alcohols, two equivalents of grignard reagent are required. the first equivalent reacts in a typical nucleophilic acyl substitution reaction to give a ketone. this ketone, however, is itself reactive in the grignard reaction. thus, the second equivalent adds to the ketone carbonyl carbon. subsequent protonation yields the tertiary alcohol. Draw the curved arrows to show the movements of electrons on this step of mechanism
The movement (flow) of electrons during bond-forming and/or bond-breaking events is depicted by curved arrows. The location of the electron or electron pair's origin is shown by the foot of the arrow, and their destination is indicated by the head of the arrow.
Which curved arrows depict how the electron pairs are moving during the reaction?"Curly arrows" are most frequently used to depict the motion of electron pair. Similar arrows can also be used to depict the motion of a single electron, although these arrows' heads only have a single line as opposed to two.
What does a reaction's curved arrow represent?Nonlinear, curved arrows with barbs on one end are used to represent electron flow. an arrow with two barbs a double-barbed arrow denotes motion of a pair of electrons, while a single-barbed arrow denotes motion of a single electron.
To know more about curved arrows visit;-
https://brainly.com/question/16598505
#SPJ4
A 2. 26 l balloon of helium is at 30°c and 1. 61 atm, what is the pressure if the volume is increased to 4. 12 l?.
The pressure if the volume is increased to 4. 12 l is 0.8832 atm.
Per Boyle's Law:
If the temperature is held constant, the volume of a fixed amount of gas is inversely proportional to its pressure:
V∝[tex]\frac{1}{P}[/tex]
and
To find pressure resulting from a change in volume:
[tex]\frac{P1 V1}{V2}[/tex] = P2
So:
P1 = 1. 61 atm
V1 = 2. 26 L
V2 = 4. 12L
P2 =[tex]\frac{(1. 61 atm) (2. 26 L)}{ 4. 12 L}[/tex]
P2 = 0.8832 atm
This answer makes sense because Boyle's Law states that a given volume of gas at a constant temperature should have a proportionally lower pressure as the volume is increased.
Hence 0.8832 atm is a correct answer.
To know more about Boyle's Law follow link
https://brainly.com/question/1437490
#SPJ4
What is the effectiveness of a chemical sanitizer solution?.
The effectiveness of a chemical used for disinfection or sanitization depends on its capacity to lower the amount of pollution.
What is a chemical sanitizer used for?In order to lower the quantity of bacteria on dishes and other food contact surfaces to acceptable levels, chemical sanitizers are employed in food facilities. Chlorine, iodine, or quaternary ammonium are the typical components of chemical sanitizers used in the food sector.
Chemical substances that are capable of eradicating disease-causing microorganisms are also used to sanitise. Chemical disinfectants are widely used in the food service sector.
Products that need prolonged contact durations, including those that must be used in hot, dry settings, may evaporate before disinfection is achieved.
learn more about sanitizers refer
https://brainly.com/question/4713569
#SPJ4
were the two alkene products formed in equal amounts? in a ratio that equals the statistical probability of forming each alkene? hint: think of the number of protons on a particular carbon that can be removed.
The two alkene products formed in equal amounts: 2-methyl-2-butanol.
In the elimination reaction of 2-methyl-2-butanol with the addition of phosphoric acid, the two products are 2-methyl-2-butene and 2-methyl-1-butene. It's the statistical probability of forming each alkene from this reaction.
This is the statistical probability of getting 2-methyl-2-butene versus 2-methyl-1-butene the number of protons on a particular carbon that can be removed
Alkenes are more reactive than alkanes and undergo additional reactions and equations for the reactions of alkenes with hydrogen and halogens and of symmetrical alkenes with hydrogen halides and water. including the conditions for the hydrogenation of ethene (high pressure/temperature, Ni catalyst).
Learn more about Alkenes here:
https://brainly.com/question/13910028
#SPJ4
