What is the de broglie wavelength of this electron? [ke[ke = 12mv2;12mv2; 1 electron volt (ev)(ev) = 1. 602×10−19j]

Answers

Answer 1

broglie wavelength of this electron is 107.5pm.

what is de broglie wavelength?

The wavelength (λ) that is associated with an object in relation to its momentum and mass is known as de Broglie wavelength.

Given:

de broglie wavelength of this electron? [ke[ke = 12mv2;12mv2; 1 electron volt (ev)(ev) = 1. 602×10−19j] is 107.5pm

[tex]h = 6.63 \times 10 { }^{ - 34} [/tex]

[tex]k = 120ev[/tex]

[tex]me = 9 \times 10 {}^{ - 31} kg[/tex]

[tex]1ev = 1.6 \times 10 {}^{ - 19} [/tex]

[tex]p = \sqrt{2mk} [/tex]

[tex] = \sqrt{2 \times 9 \times 10 { }^{ - 31} \times 1.6 \times 10 {}^{ - 19} } [/tex]

[tex] = 5.88 \times 10 {}^{ - 24} kgm/s[/tex]

de broglie wavelength

λ=h/p

[tex] = \frac{6.63 \times 10 {}^{ - 34} }{5.88 \times 10 {}^{ - 24} } [/tex]

Thus from the above calculation the de broglie wavelength comes out to be 107.5pm

learn more about de broglie wavelength from here: https://brainly.com/question/28165547

#SPJ4


Related Questions

Can a wire carry a current and still be neutral—that is, have a total charge of zero? Explain.

Answers

When a wire is carrying current, charges enter the wire at the positive terminal of the voltage source and exit at the negative terminal, keeping the overall charge at zero throughout the current's passage.

Wire carries a current and still be neutral:

Charge moving across a conductor produces current. There is always the same number of electrons in a wire today. As a result of an equal amount of electrons entering and exiting the circuit simultaneously, current flows through the wire when electrons enter the circuit. Current flow may nevertheless be neutral with no overall charge.

Neutral wires do indeed carry current. In single-phase circuits, the current flows in the opposite direction from the "phase" or "line" or "hot" wire, but it is exactly equal to that current. Out of "line," into "neutral," back into "line," and finally back into "neutral" and back into "line" (since it is AC the direction reverses every cycle.)

Learn more about current here:

https://brainly.com/question/25922783

#SPJ4

What term appears in total energy equation of a flowing fluid, that does no appear in the total energy equation for a non-flowing fluid?

Answers

The Kinetic energy per unit volume appears in total energy equation of a flowing fluid, that does not appear in the total energy equation for a non-flowing fluid.

Kinetic Energy per unit volume is defined as the Kinetic energy of the flowing fluid per unit volume.

Bernoulli Equation is a equation that remains constant for a given fluid which comprises of Potential energy per volume, Kinetic energy per volume and Pressure.

It is given by:

P + ρgh + ρv²/2 = constant

where, P is the Pressure

            ρ is the density of fluid

            g is acceleration due to gravity

            h is the height

            v is the velocity

∴ ρgh is called as Potential energy per volume

ρv²/2 is called as Kinetic energy per volume

In a Flowing Fluid:

P is presentPotential energy per volume is presentKinetic energy per volume is present since velocity is present

In a Non-Flowing Fluid:

P is presentPotential energy per volume is presentKinetic energy per volume is absent since velocity is absent

Hence, Kinetic Energy per unit volume does not appear in the total energy equation for a non-flowing fluid but appears in total energy equation for a flowing fluid.

Learn more about Bernoulli Equation here, https://brainly.com/question/13098748

#SPJ4

A 3. 5-a current is maintained in a simple circuit with a total resistance of 1500 ω. What net charge passes through any point in the circuit during a thirty second interval?.

Answers

Electric Current:

Electric current is the flow of charge through a given circuit per unit time. Electric current is one of the components needed to calculate the electric power that a device needs to operate and do work. Electric current is measured in amperes (A), which is equal to:

            1A = 1 C/ s

Recall that the coulomb (C) is the unit for charge while the second (s) is the unit for time

Given: I = 3.5

A is the current

Δt =30 s is the time interval

                     A =ΔQ/ΔT

Net charge = 100C

Electricity is produced when an electric current runs through a circuit.

How does electric current work?

A current of electricity is a steady flow of electrons. When electrons move from one place to another, round a circuit, they carry electrical energy from place to place like marching ants carrying leaves. Instead of carrying leaves, electrons carry a tiny amount of electric charge.

Learn more about Electric current :

brainly.com/question/27003377

#SPJ4

When 6a of ac current at 114 v flows in the primary coil of an ideal transformer, how many amps at 29 v wul flow in the secondary?

Answers

The current that will flow in the secondary coil will be 23.5 Amperes

Power is the rate per unit time, at which electrical energy is transferred by an electrical circuit.

The SI unit of power is the watt and is given by Voltage * Current

Let's solve the question:

Given:

Voltage ( Primary ) = Vp = 114 V

Current ( Primary ) = Ip = 6 A

Voltage ( Secondary ) = Vs = 29 V

Current ( Secondary ) = Is = ?

In Ideal Transformer Primary Power = Secondary Power

Therefore, Vp * Ip = Vs * Is

                  114 * 6 = 29 * Is

                   684 = 29 Is

                   Is = 23.5 Amperes

To learn more about Transformer click below :

https://brainly.com/question/15200241

# SPJ4

If you apply 10.0 n of force to lift an object with a single, fixed pulley, then what is the resistive force?

Answers

Resistive force against 10.0 N of force to lift an object with a single, fixed pulley will be 10 N

Resistive force is a force, or the vector sum of numerous forces, whose direction is opposite to the motion of a body

A resistive force is one that inhibits or resists the motion of an object. It acts in a direction opposite to any motion or applied force that is trying to move the object. The most common resistive force is friction where an object is held back from sliding across a surface.

The force that the string (or similar) exerts on the object in these types of problems is called tension. Resistive Forces These include: Friction which is a force that prevents, or tries to prevent, the slipping or sliding of two surfaces in contact.

Hence , resistive force against 10.0 N of force to lift an object with a single, fixed pulley will be 10 N but in opposite direction to where pulley is been lifted .

To learn more about friction

https://brainly.com/question/13000653

#SPJ4

If the pressure on a gas is increased, then its volume will decrease because the gas molecules will be pushed closer together. did the data support the hypothesis (above)? justify your answer.

Answers

Boyle's Law

As weight was added to the top of a syringe, the volume of the air trapped in the syringe decreased. The weight and the surface area of the plunger were used to calculate pressure. As more weight was added, the pressure increased. The volume decreased in response.

What is Boyle's law ?

As the pressure on a gas increases, the volume of the gas decreases because the gas particles are forced closer together. Conversely, as the pressure on a gas decreases, the gas volume increases because the gas particles can now move farther apart

A contained gas's pressure will rise when its volume is reduced, and fall when its volume is increased. In actuality, the pressure reduces by the same factor as the volume increases, and vice versa.

Learn more about Boyle's law here:

https://brainly.com/question/26040104

#SPJ4

Answer:yes

Explanation:

Sample Justification: As weight was added to the top of a syringe, the volume of the air trapped in the syringe decreased. The weight and the surface area of the plunger were used to calculate pressure. As more weight was added, the pressure increased. The volume decreased in response.

then

yes and yes

If a current of 2. 4 a is flowing in a wire of diameter 2. 0 mm, what is the average current density?

Answers

The average current density is 7.6 × 10⁵ A/m².

To calculate the current density current will be 2.4 A.

Diameter of a wire = 2mm.

The cross-sectional area of the wire is given by r = d/2

where r is the radius of the wire.  

Then, the cross-sectional area is = 0.00000314159265

                                                                   = 3.1 × 10⁻⁶ m².

What is average current density?

         Consider a current carrying conductor, the current density depends upon  the current flow in the conductor. If the current flow in the conductor will be high then the current density will also be high. Using the average current flowing through the conductor, the average current density will be found.

Average current density j = I / A Ampere/ meter².

By substituting the values in the formula,

             j = 2.4 / ( 3.1 × 10⁻⁶)

               = 7.6 × 10⁵ A/m².

Hence, the current density can be calculated.

Learn more about average current density,

https://brainly.com/question/3981451

#SPJ4

When two vectors are added geometrically (by drawing them), how are they arranged?

Answers

Two vectors are added geometrically (by drawing them), they arranged in such a way that Tail of one touching the head of the other .

A vector is a quantity or phenomenon that has two independent properties: magnitude and direction. The term also denotes the mathematical or geometrical representation of such a quantity. Triangle law of vector addition is used to find the sum of two vectors when the head of the first vector is joined to the tail of the second vector.

Magnitude of the resultant sum vector R: R = √([tex]P^{2}[/tex] + 2PQ cos θ + [tex]Q^{2}[/tex])

According to the Parallelogram law of vector addition: If two vectors are considered to be the adjacent sides of a parallelogram, then the resultant of the two vectors is given by the vector that is diagonal passing through the point of contact of two vectors. drawn from the same point.

To learn more about  vectors  here

https://brainly.com/question/13322477

#SPJ4

A generator produces 38 mwmw of power and sends it to town at an rms voltage of 78 kvkv. part a what is the rms current in the transmission lines?

Answers

The rms current in the transmission lines is I = 487.18 A.

The root-imply-rectangular (rms) voltage of a sinusoidal supply of electromotive force  is used to represent the source. it is the rectangular root of the time average of the voltage squared.

Alternating-present day circuits. the root-imply-square (rms) voltage of a sinusoidal source of electromotive force is used to symbolize the supply. it's far the square root of the time average of the voltage squared.

Electric power is  by using present day or the waft of electric fee and voltage or the capacity of rate to deliver electricity. A given cost of power can be produced by using any combination of contemporary and voltage values

power = 38 M watt

rms voltage = 78 K v

power = IV

I = power/V

I = (38 * 1000000)/78*1000

I = 487.18 A.

Learn more about rms current here:-https://brainly.com/question/20913680

#SPJ4

A particle of mass 16kg travelling with a velocity of 10m/s is acted upon by a steady force of friction in a direction opposite that of its motion. Find the speed of the particle after 10 seconds if the force of friction is 25N.​

Answers

The speed of the particle after 10 seconds is, 25.88m/s.

To find the answer, we have to know more about the equations of motion.

How to find the speed of the particle after 10s?It is given that,

                          [tex]m=16kg\\u=10m/s\\t=10s\\f=25N[/tex]

It is clear from the question that, the motion is balanced by the frictional force. Thus, the acceleration will be,

                        [tex]ma=f\\a=\frac{f}{m} =\frac{25}{16}=1.6m/s^2[/tex]

We have the equation of motion for the distance travelled as,

           [tex]S=ut+\frac{1}{2}at^2=(10*10)+(\frac{1.6*10^2}{2})=178.13m[/tex]

Thus, by another equation of motion connecting a, S, and u, we get the final speed after 10s as,

                [tex]v=\sqrt{u^2+2aS} =\sqrt{10^2+(2*1.6*178.13)} =25.88m/s[/tex]

Thus, we can conclude that, the speed of the particle after 10 seconds is, 25.88m/s.

Learn more about the equations of motion here:

https://brainly.com/question/24595388

#SPJ1

Question 1 of 28
Which sentence is generally true of red stars?
OA. They are the oldest stars.
OB. They are the hottest stars.
OC. They are the youngest stars.
D. They are the coldest stars.

Answers

Answer: D. They are the coldest stars.

Explanation:

what is the definition of laws of conservation​

Answers

Answer:

conservation law, also called law of conservation, in physics, a principle that states that a certain physical property (i.e., a measurable quantity) does not change in the course of time within an isolated physical system.

Explanation:

The definition of a conservation law in physics asserts that a certain observable attribute of an isolated physical system doesn't change over time.

When constructing a climograph one needs to know the annual_________ temperature and wind speed.

Answers

A Final statement or concluding statement

When constructing a climograph one needs to know the annual average temperature and wind speed.

What is the purpose of Climographs?

A climograph is a graph that depicts an area's average (mean) precipitation and temperature.

It is used to compare the climate of various locations.

Climographs are made to compare climates in various locations.

Climographs simplify a large amount of numerical data into a simple  depiction of bars and lines.

Climographs are useful for observing trends in climate and comparing  climates in different locations since they are so basic.

To learn more about Climographs from the given link

https://brainly.com/question/15010448

#SPJ4

Observing star clusters will give astronomers needed data for stellar evolution because all the stars in the cluster have the same ___.

Answers

Observing star clusters will give astronomers needed data for stellar evolution because all the stars in the have the same Age

A star changes over time through a process called stellar evolution. A star can have a life that is substantially longer than the age of the universe, ranging from a few million years for the most massive to billions of years for the least massive.

Stellar evolution is a term used to describe how stars change through time. Most stars don't seem to change much on a human time scale, but if we looked for billions of years, we would witness how stars are born, how they grow older, and then how they die. Stellar evolution is significant because it produces the majority of the components.

To learn more about Stellar evolution please visit-
https://brainly.com/question/12790561
#SPJ4

A bus travelling at 30m/s along a straight road passes throu a stationary taxi cab.the can begins to move 5seconds later within a uniform acceleration of 2metres per seconds square in the same direction as the bus.1.calculate the time taken by the cab to meet the bus.2.distance the cab has travelled to catch-up with the bus

Answers

(1) The time taken by the cab to meet the bus is 18.96 seconds.

(2) The distance the cab has travelled to catch-up with the bus is 718.96 m.

Distance between the bus and the cab

The distance between the bus and the cab when the cab begins to move is calculated as follows;

D = speed x time

D = 30 m/s x 5 s

D = 150 m

Velocity of the cab

The velocity of the cab when it begins to move is calculated as follows;

v = at

(v - 30)t = D

(at - 30)t = 150

(2t - 30)t = 150

2t² - 30t = 150

2t² - 30t - 150 = 0

solve the quadratic equation using formula method

t = 18.96 seconds

Distance traveled by the cab

D =  vt

D = 2t²

D = 2(18.96²)

D = 718.96 m

Thus, the time taken by the cab to meet the bus is 18.96 seconds. The distance the cab has travelled to catch-up with the bus is 718.96 m.

Learn more about distance here: https://brainly.com/question/2854969

#SPJ1

Southern hemisphere winds move surface water 90 degrees to the left of the direction of the wind.
a) true
b) false

Answers

Southern hemisphere winds moving surface water 90 degrees to the left of the direction of the wind is a true statement.

What is Wind?

This is referred to as the natural movement of air and other gases present in the atmosphere.

In the southern hemisphere, the surficial ocean waters which are moved by wind will result in a net perpendicular leftward movement to it thereby making it the most appropriate choice.

Read more about Wind here https://brainly.com/question/158098

#SPJ1

The virus-induced, specific damage to the host cell that can be seen in a light microscope is called:________

Answers

Answer:

It's called, "Cytopathic effects."

Part a a calorimeter consists of an aluminum cup inside of an insulated container. The cup is weighed on a top-loading balance and is found to have a mass of 31. 91 g. A reaction is conducted in the calorimeter, raising the temperature from 21. 2 c to 26. 1 c what is the change in heat q for the aluminum cup in units of j? aluminum has a specific heat of 0. 903 j 1 ? 1 write your answer to the correct number of significant figures.

Answers

The change in heat q for the aluminum cup is 141 J.  

What is Specific heat?

A substance's heat capacity is the amount of heat needed to increase its overall temperature by one degree. The heat capacity is known as the specific heat capacity or the specific heat if the substance's mass is unity.

change in heat -

The amount of heat Q that is transported to create a temperature shift depends on the substance and phase involved, the mass of the system, and the magnitude of the temperature change. (A) The temperature change and the amount of heat transported are directly inversely related.

The answer's sign dig is determined by a calculation's lowest sign digits.

The solution will need 3 digits because the temperatures are provided with 3 significant digits and the specified heat has 3 significant digits (the mass has 4 significant digits).

31.91 g   * 0.903 J/g-C  *  (26.1 - 21.2 C) = 141 J

to learn more about Specific Heat go to - https://brainly.com/question/21406849

#SPJ4

Write an equation that expresses the first law of thermodynamics in terms of heat and work.

Answers

Answer:

Heat Input = Work Output       (at 100% efficiency)

ΔQ = ΔW

(you cannot get something for nothing)

What effect does the diameter of the string have on the lever arm? explain why we can ignore this effect

Answers

The effective lever arm will be enhanced if we utilize a big diameter string.

What is Lever Arm?

The perpendicular distance from the axis of rotation to the force's line of action is specified as the lever arm.

When a big diameter string is utilized, the effect of the diameter on the string of the lever arm will be enhanced.

This is due to the reason that if the radius of the pulley is R and the radius of the string is r, then the effective lever arm becomes R+r.

If the radius,r of the string is very minute such that its addition to the radius of the pulley, R will hardly make a change to the effective lever arm, then it is avoided. However, if the radius of the string is a big number then it can not be avoided as it can make significant errors in the calculation of the effective lever arm.

Hence, The effective lever arm will be enhanced if we utilize a big diameter string.

Learn more about Lever Arm here:

https://brainly.com/question/14682047

#SPJ2

According to hubble's law, with = 70 km/s. What is the recessional velocity of a galaxy at a distance of 180 mpc?

Answers

The recessional velocity of a galaxy at a distance of 180 mpc will be 70 km/sec

Hubble's law, which says simply that a galaxy's velocity (or as is sometimes plotted, its redshift) is directly proportional to its distance, also tells us something important about the state of the universe. If the universe is static and unchanging, there should be no correlation between distance and velocity.

Recessional velocity is the rate at which an extragalactic astronomical object recedes (becomes more distant) from an observer as a result of the expansion of the universe. It can be measured by observing the wavelength shifts of spectral lines emitted by the object, known as the object's cosmological redshift.

Recessional velocity = Hubble's  constant *  distance

                                  = 70 km/sec/Mpc * 180 Mpc

                                  = 70 km/sec

To learn more about recessional velocity here

https://brainly.com/question/19578750

#SPJ4

Find the average value have of the function h on the given interval. h(u) = (ln(u))/u, [1, 5]

Answers

The average value have of the function h on the given interval is  [tex]\frac{1}{2} \ln^2 (2)[/tex].

How to find the Average Value of function ?

The given function is [tex]h (u) = \frac{\ln (u)}{u}[/tex] on the interval (1, 5).

The average value of function (a, b) is found by using the formula:

[tex]\frac{1}{(b -a)} \displaystyle \int^{b}_{a} f(x) dx[/tex]

Here the function is  [tex]h (u) = \frac{\ln (u)}{u}[/tex] and a = 1, b = 5

Now,

[tex]\dfrac{1}{(5 - 1)} \displaystyle \int^{5}_{1} \frac{\ln (u)}{u}\ du[/tex]

[tex]= \dfrac{1}{4} \displaystyle \int^{5}_{1} \frac{\ln (u)}{u}\ du[/tex]

Substitute [tex]\ln (u) = t, dt = \frac{1}{u}\ du[/tex]

[tex]\dfrac{1}{4} \displaystyle \int^{4}_{1} \frac{\ln (u)}{u} du = \frac{1}{4} \int^{4}_{1} t (dt)[/tex]

                      [tex]= \frac{1}{4} \left [\frac{t^2}{2} \right ]^{4}_{1}[/tex]

                      [tex]= \frac{1}{8} \left [\{\ln (u)\}^2 \right ]^{4}_{1}[/tex]

                      [tex]= \frac{1}{8} [\{\ln (4) \}^2 - \{\ln (1) \}^2 ][/tex]

                      [tex]= \frac{1}{8} [\{\ln (4)\}^2 - 0][/tex]

                      [tex]= \frac{1}{8} \ln^2 (4)[/tex]

                      [tex]= \frac{2}{4} [2 \ln (2)]^2[/tex]

                      [tex]= \frac{1}{2} \ln^2 (2)[/tex]

Thus from the above conclusion we can say that The average value have of the function h on the given interval is  [tex]\frac{1}{2} \ln^2 (2)[/tex].

Learn more about the Integrational Average value please click here : https://brainly.com/question/27419605

#SPJ4

A vector of magnitude 20 is added to a vector of magnitude 25. the magnitude of this sum can be?

Answers

The sum of vectors lie between 5 - 45

We all know that Vector is a quantity of Magnitude and Direction.

Couple of examples of Vector quantity are Acceleration, Displacement, Force, Momentum, Velocity

Let's solve the problem:

I A I is given as 20

I B I is given as 25

The sum of vectors lie between their maximum and minimum

Hence,

MIn < Sum of Vectors < Max

I A-B I < Sum of Vectors < I A + B I

I 20 - 25 I < Sum of Vectors < I A + B I

5 < Sum of Vectors < 45

For more information on Vectors click here

https://brainly.com/question/14480157

# SPJ4

When a small force is applied to a gyro, the result will instead occur 90 degrees ahead of that point, in the direction of rotation. this principle is known as:_____.

Answers

When a small force is applied to a gyro, the result will instead occur 90 degrees ahead of that point, in the direction of rotation. this principle is known as: Precession

What is precession?

Precession is a shift in the direction of a rotating body's rotational axis. It can be described as a modification of the first Euler angle in the proper reference frame, while the rotation itself is defined by the third Euler angle. In other terms, a body is said to be precessing about a second axis if its own axis of rotation is spinning about that second axis. Nutation is a motion in which the second Euler angle varies. Precession can be either torque-free or torque-induced in physics.

To learn more about Precession from the given link:

https://brainly.com/question/4880418

#SJP4

Which mystery primate is a biped? list the characteristics you choose to justify your answer

Answers

Primate B mystery primate is a biped.

The characteristics are:

The vast majority of primates live in trees (Notable exceptions are humans and gorillas).The majority of primates have upright upper bodies and occasionally walk on two feet (Humans are erect and always exhibit bipedalism).All primates have smaller noses and matching olfactory brain regions (except Lemurs).Compared to other mammals, primates have enormous brains for their size. Stereoscopic vision, hand-eye coordination, and manual dexterity are all governed by the brain's enlarged regions.Considering the size of the animal, long gestationsPrimate sociality is rather high in general.The majority of primates are nocturnal.The highly enjoyable action of grooming is shared by all highly evolved primates, including humans.Primate

Lemurs, lorises, tarsiers, monkeys, apes, and humans are all included in the biological order called primates. Class Mammalian of the phylum Vertebrate includes creatures with qualities that have evolved recently in the taxonomic classification of the animal kingdom. 19 subtaxa known as orders have been added to the Mammalia classification. Primates are one of such groups, which contains eutherian animals like monkeys and apes. As a result, during a period of 30 million years, new world and old world monkeys underwent different adaptive radiations and were reproductively isolated. The Oligocene epoch saw the evolution of prosimians. About 30 million years ago, all currently extant primates underwent evolution.

Which mystery primate is a biped? list the characteristics you choose to justify your answer

Learn more about primate here:

https://brainly.com/question/16671781

#SPJ4

What feature of the solar system separates the terrestrial planets from the jovian planets?

Answers

Jovian Planets have low density and no Earth like things, like the terrestrial planets.

All of the planets in our solar system,except Pluto—are categorized as either terrestrial (like Earth) or jovian (like Jupiter) planets

Terrestrial planets:

The planets Mercury, Venus, Earth, and Mars are all terrestrial. These planets are both physically and mass-wise quite small. A terrestrial planet has a dense interior of metals and a stable rocky surface. These planets are warmer than planets farther from the sun because they are closer to the sun in the solar system.

Jovian planets:

Saturn, Uranus, Neptune, and Jupiter are examples of jovian planets. These planets are bigger and heavier. The surfaces of Jovian planets are not solid. Due to their size and composition, which is primarily gases, they are sometimes referred to as gas giants. Only in the deepest regions of the Jovian planets' cores can one find trace amounts of rocky elements. Jovian planets are cooler because they are farther from the sun than terrestrial planets in the solar system.

Learn more about the Solar system with the help of the given link:

https://brainly.com/question/7942530

#SPJ4

What is the concentration of the acute leukemia cc95 combination value in micromolar (μm) units?

Answers

The concentration of the acute leukemia cc95 combination value in micromolar (μm) units is  6 × 10-4 μM.

Acute lymphocytic leukemia (ALL) is also called acute lymphoblastic leukemia. “Acute” means that the leukemia can progress quickly, and if not treated, would probably be fatal within a few months. "Lymphocytic" means it develops from early (immature) forms of lymphocytes, a type of white blood cell.

A rapidly progressing cancer that starts in blood-forming tissue such as the bone marrow, and causes large numbers of white blood cells to be produced and enter the blood stream.

In acute leukemia, the abnormal blood cells are immature blood cells (blasts). They can't carry out their normal functions, and they multiply rapidly, so the disease worsens quickly. Acute leukemia requires aggressive, timely treatment.

This corresponds to 0.6 × 10^-9 M × (1 μM/1 × 10^-6 M) = 0.6 × 10^-3 μM = 6 × 10-4 μM.

Acute myeloid leukemia (AML) is caused by a DNA mutation in the stem cells in your bone marrow that produce red blood cells, platelets and infection-fighting white blood cells. The mutation causes the stem cells to produce many more white blood cells than are needed.

To learn more about Acute lymphocytic leukemia

https://brainly.com/question/10483684

#SPJ4

What are the two decisions that you can make from performing a hypothesis test? what are the two decisions that you can make from performing a hypothesis test? select all that apply

Answers

When conducting a hypothesis test there are two possible decisions  that you can make: reject the null hypothesis or fail to reject the null hypothesis.

A statistical hypothesis test is a method of statistical inference used to decide whether the data at hand sufficiently support a particular hypothesis. Hypothesis testing allows us to make probabilistic statements about population parameters.

When conducting a hypothesis test there are two possible decisions: reject the null hypothesis or fail to reject the null hypothesis. You should remember though, hypothesis testing uses data from a sample to make an inference about a population. When conducting a hypothesis test we do not know the population parameters. In most cases, we don't know if our inference is correct or incorrect.

When we reject the null hypothesis there are two possibilities. There could really be a difference in the population, in which case we made a correct decision. Or, it is possible that there is not a difference in the population (i.e.,  is true) but our sample was different from the hypothesized value due to random sampling variation. In that case we made an error. This is known as a Type I error.

When we fail to reject the null hypothesis there are also two possibilities. If the null hypothesis is really true, and there is not a difference in the population, then we made the correct decision. If there is a difference in the population, and we failed to reject it, then we made a Type II error.

Learn more about hypothesis test here : https://brainly.com/question/15980493

#SPJ4

A spaceship travels at approximately 0. 25c with respect to earth. this means 24 hours at the spaceship will be x hours to us on earth. find the time passed ton earth

Answers

The time passed on earth is  mathematically given as

t' = 24.79 hrs

What is the time passed on earth?

Generally, the equation for is time  mathematically given as

[tex]t' = \gamma t[/tex]

Where

[tex]\gamma = Lorentz\ factor \\\\\gamma = 1/ \sqrt {(1 - v^2/c^2)}[/tex]

[tex]t' = t/ \sqrt {(1 - v^2/c^2)}[/tex]

Therefore

[tex]t' = 24/ \sqrt {(1 - (0.25c/c)^2) }[/tex]

[tex]t'= 24/ \sqrt {(1 - 0.25^2)[/tex]

t' = 24.79 hrs

In conclusion, the time passed on earth

t' = 24.79 hrs

Read more about the time

https://brainly.com/question/28050940

#SPJ1

A 600-kg car makes a 90° turn. its speed before the turn is 21. 0 m/s and after the turn it is 24. 0 m/s. what is the magnitude of the change in the car's momentum during the turn?

Answers

The magnitude of the change in the car's momentum during the turn is

[tex] = 1.9 \times 10 {}^{3} kgm/s[/tex]

What is momentum?

Momentum can be defined as "mass in motion." All objects have mass,so if an object is moving, then it has momentum - it has its mass in motion.

Given:

V1=21m/s

V2=24m/s

m=600kg

To Find:

momentum

Now using Pythagoras theorem

[tex]f = ((600)(21)) {}^{2} + ((600)(24)) {}^{2} [/tex]

[tex]f = \sqrt{1.59 \times 10 {}^{8} + 2.07 \times 10 {}^{8} } [/tex]

[tex] = 1.9 \times 10 {}^{3} kgm/s[/tex]

learn more about momentum from here: https://brainly.com/question/28165726

#SPJ4

Other Questions
Find an equation for the plane through the three points p(0, 1, 1), q(1, 0, 1), and r(1, 1, 0) If apples cost $3 per pound and bananas cost $5 per pound, how many pounds of bananas should bill buy if he wants to maximize his utility and he has $31 to spend? Traditional promotional messages through advertising, publicity, and personal selling are known as? What was the Chinese economic program of the late 1950s and early 1960s?O Red SummerO Communist RevolutionO Great Leap ForwardO Cultural Revolution The art created during the ""golden age"" of charlemagne rule is called ____________ art. Joseph is planning dinners for the next 4 nights. There are 10 meals to choose from. If no meal is repeated, how many different meal arrangements are possible? What are the goals of u. s. foreign policy? How do proponents of isolationism think we should go about achieving these goals? From the consumers perspective, the elements of an imc strategy can be viewed as being either. Firms that have selected a related diversification corporate-level strategy seek to exploit? Slope=Help me please thanks When constructing a perpendicular line through a point on a line, how can you verify that the lines constructed are perpendicular? (1 point)Check the angles used in the construction with a straightedge to ensure consistency.Check the distance along the lines at several places with a compass to ensure they are the same length.Check the intersecting lines with the corner of a piece of paper to ensure the lines create 90 angles.Check the distance between the lines at several places with a compass to ensure they are equidistant Read the speech and answer the question.Voluntourism: An Opportunity Too Good to be TrueA Speech to the Student Body of Evergreen High[1] Picture this: It's Spring Break, and you fly off to some country where there's lush rainforests and beautiful, blue coastlines to explore. There's also people in need, so you decide to blend your vacation with volunteering. Volunteering as a tourist, or voluntourism, seems like a great way to explore new regions and help people at the same time. However, this "volunteer plus travel" experience can actually harm local communities. While many teens might view traveling and volunteering abroad as a worthwhile adventure, there are more genuine and effective ways to make a difference.[2] Most would agree that volunteering in general is a worthy use of time. However, what if you found out the children you are "helping" are actually being kept in poor conditions so voluntourists will spend money to come to the local area? Dale Rolfe, a supporter of ethical voluntourism, explains the shocking reality that "Animal sanctuaries and orphanages are often manufactured for the voluntourist...encouraging a cycle of exploiting the very animals and children the volunteers are trying to help."[3] Proponents of the "volunteer plus travel" experience also argue that traveling to new places builds character and is a valuable way to learn about different cultures. With voluntourism, however, participants often pursue experiences that are all about them. For example, they sign up to build a school for a gold star on their resume, but they have no real building skills and take jobs away from local construction workers (Schulten). Or, they arrive to teach English but instead take selfies with the locals. One world traveler and ethical voluntourist believes voluntourism "can perpetuate small minded views of the world by taking insulated, fake, and structured experiences and selling them as unabridged and eye opening" (Carlos). The voluntour experience is a mirage. The voluntourist's eyes are not opened to real life at the destination, and lasting change is not achieved.[4] If you want a genuine experience where you can see a lasting impact, there are better options than voluntourism. You can volunteer in your local community. Give an hour every week to your town's animal rescue. Serve monthly dinners to the homeless. Be a reliable, positive influence on a child who needs a mentor. Studies show that volunteering and forming lasting relationships with those you help has a positive impact on your physical and emotional health. In fact, blood pressure is reduced, memory is improved, and rates of depression are reduced (Michaels).[5] There is another reason to look into alternatives to voluntourism. Did you know the average "voluntour" travel package costs $3,400 (Rolfe)? Could that travel money be better spent? If the world's citizens are your passion, it could go to an international organization. If you care about education, your funds can be used to buy books for students in faraway lands. If you want villagers to have clean water, contribute funds to local efforts to dig wells. If you want to experience a different culture, travel to the country as a guest, and learn from the locals how you can best help them after you've returned home. But do not voluntour.[6] In reality, there are better ways to make a difference. Voluntourism might appear to be an adventure that blends travel and helping others, but it does little except provide a costly, superficial experience that might actually do more harm than good. So, volunteer where you are most needed-at home, where you can stay to see the job through and form genuine, lasting relationships. Choose a beautiful coastline closer to home and send the travel money you saved to an international organization that will put it to good use. Whatever you do, don't turn someone else's hardship into your vacation.Identify the two strategies the speaker uses to develop the point that people who voluntour often have selfish motivations. Examples Metaphor Repetition Stories Statistics Help and get what you want. how many lines does characteristic writing need? Identify the classification of milk a aerosol b solid emulsion c solid aerosol d foam e emulsion In what way was sarah palin a strategic choice as john mccain's running mate in the 2008 presidential election? What imperial decree in the eighth century led to a decline in the centralized power of the Japanese emperor? A tax increase Tax exemptions for land development The abolition of serfdom The appointment of a powerful shogun HELP NEED ANSWERS QIUCKLY! WILL GIVE BRAINLEST!1. What is the difference between arithmetic and geometric?2. Which formulas are used for each? Explain ratio and difference.3. Given 4, 8, 16, 32 identify the next term and if its a ratio or difference4. Explain the steps in using the sigma notation. i. 749x98+749 x2 ii. 62 x 999 +4795 iii. 736 x 97 iv. 258 x 1008solve these using distributive propertypls help if u know can someone help me with the graph I don't get it thanks