The equation of the line that passes through (1, 2) and is parallel to the line whose equation is 4x + y - 1 = 0 is 4x+y-6=0.
What is meant by slope-intercept form?The line's equation is expressed in slope-intercept form: y = mx + b, where m represents the slope and b represents the y-intercept.
The slope intercept form is used to calculate the y-intercept and slope of a straight line.
We know that the equation of the line is, y= mx +b
4x+y-1=0 is the same as y= -4x+1
For this equation, b=1, but for a line with slope -4 passing through the point (1,2), the y-intercept changes.
y= -4x+b
The above line is passing through the point (1, 2)
2=-4(1)+b
Now, we have to solve for b value we get b=6.
The equation that we get is,
y= -4x+6 or 4x+y-6=0.
The equation of the line that passes through (1, 2) and is parallel to the line whose equation is 4x + y - 1 = 0 is 4x+y-6=0.
To know more about slope-intercept form, visit:
https://brainly.com/question/9682526
#SPJ4
An object is pulled up a ramp with a 25° incline. the force required to move the object is 300 pounds. what is the component form of the force vector? (78, 290) (290, 78) (127, 272) (272, 127)
The component form of the force vector required to move the object of 300 pounds is (272, 127)
Suppose we have a vector v with angle θ to the positive x-axis, then the horizontal and vertical components of the vector are given as:
vx = v cos θ
vy = v sin θ
In the given problem, the vector is a force vector of 300 pounds.
w = 300
θ = 25⁰
Hence,
horizontal component = wx = w cos 25⁰
= 300 . cos 25⁰ = 272
vertical component = wy = w sin 25⁰
= 300 . sin 25⁰ = 127
Hence, the component form of the given force vector is (272, 127)
Learn more about vector here:
https://brainly.com/question/26700114
#SPJ4
Answer:
Its D on edge
Step-by-step explanation:
What are the factors of 3?.
Answer: 3 and 1
Step-by-step explanation: 3 is a prime number, which means its only factors are the number itself and 1. The number 3 is not divisible by anything else. You can only multiply 3 and 1.
ten gallons of a 25% salt solution are to be obtained by mixing a dilute 13% salt solution and a concentrated 33% salt solution. how many gallons of the dilute solution and how many gallons of the concentrated solution are needed?
The correct answer is amount of dilute solution is 4 gallons and amount of concentrated solution is 6 gallons.
Let the dilute amount of solution be x and the amount of salt in the solution be 0.13x
Then the concentrated amount be 10-x and the amount of salt in the solution be 0.33x (x-10).
Solving the equation
⇒ 0.13x + 0 .33 (10 - x ) = 2.5
⇒ 0.13x + 3.3 - 0.33x = 2.5
⇒ -0.2 x = 2.5 - 3.3
⇒ -0.2x = - 0.8
⇒ x = 4
Hence, the amount of dilute solution is 4 gallons and amount of concentrated solution is 6 gallons.
To find the similar questions on 'concentrated solution'
visit- https://brainly.com/question/18992432
#SPJ4
if we standardize both variables what would the regression equation be that predicts standardized mortgage amounts
If we standardize both variables what would the regression equation the mortgage amount will be 220.88 and the interest amount will be 7.768.
[tex]b_1[/tex] = r*[tex]S_{xy}/S_{xx}[/tex]
= -0.84
[tex]b_0 = y - b_1x[/tex]
Regression model is used to identify the relation between two variables.In the relation between two variables.
From the given question the regression model fits best to identify the mortgage amount from interest rates.
The interest rate and mortgage both are quantitative values so the regression model is most suitable for this given condition.
Therefore If we standardize both variables what would the regression equation the mortgage amount will be 220.88 and the interest amount will be 7.768.
Learn more about the regression equation here:
https://brainly.com/question/14184702
#SPJ4
Prove the following statement by strong mathematical induction:
The sequence a0, a1,... recursively defined by a0 = 0, a1 = 1 and an = 2an−1 − an−2 +2 for n = 2, 3, ..
satisfies an = n2 for all non-negative integers n.
By using the principal of mathematical induction, it can be proved that
[tex]a_n = a_{n-1} - 2a_{n-2}+2[/tex] for [tex]a_n = n^2[/tex]
What is Principle of Mathematical Induction?
Suppose a statement P(n) is given. At first P(n) is proved to be true for
n = 1. Then P(n) is assumed to be true for n = m. If it can be proved that P(n) is true for n = m + 1, then by principle of Mathematical Induction, it can be proved that P(n) is true for all natural numbers
Here
[tex]a_n = n^2\\P(n) = 2a_{n-1} - a_{n-2} + 2\\P(0) = 0^2 = 0\\P( 1)= 1^2 = 1\\P(2) = 2a_1-a_0 + 2\\P(2) = 2(1)^2 - 0^2+2 =4[/tex]
Let us assume P(0), P(1),... P(k) is true
[tex]a_{k+1} = 2a_k - a_{k-1} + 2\\a_{k+1} = 2k^2 - (k-1)^2 + 2\\a_{k+1} = 2k^2 - k^2 +2k -1 + 2\\a_{k+1} = k^2+2k + 1\\a_{k+1} = (k+1)^2[/tex]
P(k+1) is true
By Principle of Mathematical Induction,
P(n) is true for all natural numbers
To learn more about principle of Mathematical induction, refer to the link-
https://brainly.com/question/24672369
#SPJ4
What is the y-intercept of the function FX 4 5x 5 4 4 5?.
y-intercept of the function = 4
What in mathematics is a y-intercept?
A point on the y-axis at which the slope of a line passes is referred to as an intercept in mathematics.
It is a place on the y-axis where a straight line or a curve crosses. This is shown by writing the equation for a line as y = mx+c, where m denotes the slope and c the y-intercept.
Here the given function is
f(x) = 4 – 5x
Which can be rewritten as
f(x) = – 5x + 4
Which is of the form f(x) = mx + c
Where m = - 5 , c = 4
Hence y-intercept of the function = 4
Learn more about y-intercept
brainly.com/question/14180189
#SPJ4
The complete question is -
What is the y-intercept of the function f(x)=4 – 5x?
–5
–4
4
5
This is an invalid proof that all isosceles triangles are similar. Explain which step is invalid and why
The conclusion of step 4 and step 5 are not valid . Therefore, this is an invalid proof that all isosceles triangles.
Each step is valid, but the conclusion is not. At the end of step 4, there are a series of isometric maps that lead A to D and C to F, as claimed.. After the final rotation in Step 5, the sequence of isometries takes B to E and C to F —but here’s the hitch—there is no reason why it should still take A to D, in fact it can’t take A to D unless the rotation angle is zero.
If the rotation angle in Step 5 is zero, then the isometries take [A,B,C] to [D,E,F] and the two triangles are indeed similar. But this requires the dilation in Step 2 to have made A′B′ congruent to DE , in other words, it requires assuming the triangles are similar before performing any of of the transformations.
To learn more about Isoceles triangle, refer:
https://brainly.com/question/13664166
#SPJ4
Complete Question:
This is an invalid proof that all isosceles triangles are similar. Explain which step is invalid and why. 1. Draw 2 isosceles triangles ABC and DEF where AC = BC and DF = EF. 2. Dilate triangle ABC to a new triangle A'B'C' using center C and scale factor DF/AC so that A'C= BC - DF = EF. 3. Translate by directed line segment CF to take A'B'C' to a new triangle A" B" F. Since translation preserves distance, A"F = A'C=DF and B" F = BC = EF. 4. Since A"F=DF, we can rotate using center F to take A" to D. 5. Since B" F = EF, we can rotate using center F to take B" to E. 6. We have now established a sequence of dilations, translations, and rotations that takes A to D, B to E, and C to F, so the triangles are similar.
Solve using method of elimination
3x - y= 5
4x + y= 9
Answer:
Step-by-step explanation:
solving by elimination means to get rid of one of the variables, pick either one, X or Y and use the other equation to make it zero.
3x - y = 5
4x + y = 9
+______ add the two equations, column for column,
7x + 0y = 14
now solve for x, that is, get x by itself
7x / 7 = 14/7
x = 2
Now that you've solved for x, plug that x into either equation.
3(2) - y = 5
6-y = 5
6-5 = y +5-5
1 = y
Now you have both :)
Can a triangle be possible with the sides 3cm 4cm 5cm?.
Answer:
Yes, the measurements 3cm, 4cm and 5cm are possible to create a triangle!
Step-by-step explanation:
x-2.
2x + 4
25
2x - 2
24
Solve for x.
48
36
Answer: x-2
and 2x+4
Step-by-step explanation:
After analyzing several months of sales data, the owner of an appliance store produced the following joint probability distribution of the number of refrigerators and stoves sold hourly
0 1 2 Stoves
0 0.08 0.14 0.12 0.34
1 0.09 0.17 0.13 0.39
2 0.05 0.18 0.04 0.27
REF 0.22 0.49 0.29 1
b. What are the laws for a discrete probability density function?
c. If a customer purchases 2 stoves, what is the probability they will also purchase two refrigerators?
d. What is the average number of refrigerators purchased?
e. What is the variance in the number of refrigerators purchased?
f. Are the sale of stores and refrigerators independent?
g. What is the conditional probability distribution for sales in refrigerators if the customer did not purchase a stove?
h. What is the expected value and variance for sales in refrigerators, if the customer did not purchase a stove?
Each probability lies between 0 to 1, If a customer purchases 2 stoves, the probability is 0.1379 they will also purchase two refrigerators, the average number of refrigerators purchased is 0.93, and the variance in the number of refrigerators purchased is 0.6051.
A) 0 1 2 stoves
0 0.08 0.14 0.12 0.34
1 0.09 0.17 0.13 0.39
2 0.05 0.18 0.04 0.27
RF 0.22 0.49 0.29 1
B) Each probability lies between 0 to 1
All the probabilities sum up to 1
C) P(2 Ref/ 2 stoves) = P(2 Ref and 2 stoves) / 2 stoves)
= 0.04/0.29 = 4/29 = 0.1379
D) Average number of Ref purchased E(x) = ∑xi pi
X 0 1 2
Prob. 0.34 0.39 0.27
= 0.39 + 0.54
= 0.93
E) Var(x) = ∈(x)² - (∈{x})²
= (0.39 + 1.08) - (0.93 * 0.93)
= 1.47 - 0.8649
= 0.6051
To learn more about probability
https://brainly.com/question/11234923
#SPJ4
What are the 4 types of functions?.
The four types of function are One One Function , Many to One Function , Onto Function and Into Function .
The four types of functions are :
A one-to-one function is defined as f: A B, where each element in set A is connected to a specific element in set B. The one-to-one function is also known as an injective function. Each domain element in this case has a distinct image or co-domain element for the given function.A many-to-one function is defined by the function f: A B, which links various elements of set A to a single element of set B. In a many to one function, multiple elements share the same co-domain or image.In an onto function, the domain element and each codomain element are connected. For a function described by f: A B, every element in set B has a pre-image in set A. The onto function is also known as a subjective function.The characteristics of an onto function and an into function are identical. In this instance, some co-domain components are missing pre-images. Set B contains an excessive number of components in its range, and none of them are related to anything in set A.To learn more about functions visit:
https://brainly.com/question/22279877
#SPJ4
A dressmaker needs to cut 18-inch pieces of ribbon from rolls of ribbon that are 6 feet in length. How many 18-inch pieces can the dressmaker cut from 15 of these rolls of ribbon?.
Using simple Units Measurement System,
Dressmaker cut total 40 pieces of length 18 inch from 15 of given rolls of ribbon.
We have given that,
total length of roll of ribbon = 6 feet
the length of ribbon cut by dressmaker = 18 inch
As we know , 1 inch = 2.5 cm --(1)
then 1 feet = 30cm --(2)
from (1) and (2) , we get
1 feet = 12 inch
total length of roll ribbon in inch = 6×12
= 72 inches
we have total number of ribbons = 5
so, total number of inches = 5 ×72 = 360 inches
As per question given that dressmaker need to cut 18 inch piece for making dress .
So, total number of 18 inch pieces Dressmaker has is equal to ratio of total length of ribbon / length of ribbon dressmaker needed
= 720/18
= 40
Hence, total 40 pieces of length 18 inch dressmaker have.
To learn more about Units measurement System, refer:
https://brainly.com/question/777464
#SPJ4
primarily involves modifying programs to meet new business needs, but also debugging of errors that were not detected when testing the developed code.
Maintenance primarily involves modifying programs to meet new business needs, but also debugging of errors that were not detected when testing the developed code.
Preventive maintenance schedules can be regular or periodic (time-based). When an issue is discovered, corrective maintenance is performed. Maintenance is predetermined and follows a factory schedule. Condition-based maintenance occurs when a situation or condition indicates the need for maintenance.
What is modifying a program?
A program modification is defined as a programmatic change that does not clearly qualify as a new program or a nonsubstantive change, such as a new program composed primarily of course work from a previously approved program; an approved program to be offered at an off-campus location; a change in the.
Learn more about Maintenance to visit this link
https://brainly.com/question/13257907
#SPJ4
Full Question:_____ primarily involves modifying programs to meet new business needs, but also debugging of errors that were not detected when testing the developed code.
14. the height of a rectangular box is a constant 10 inches. its length increases at the rate of 2 in/sec, its width decreases at the rate of 4 in/sec. when the length is 8 inches and the width is 6 inches, find the rate at which the volume is changing in cubic inches per second.
The rate at which the volume of the box of height 10 inches is changing when the width is 8 inches and the length is 6 inches is 440 cubic inches per second
What is the volume of a rectangular box?The volume of a rectangular box is the product of the length, the width and the height of the box.
The height of the rectangular box, h = 10 inches
The rate of change of the length of the box is; [tex]\frac{dl}{dt}[/tex] = 2 in/sec
The rate at which the width is decreasing is; [tex]\frac{dw}{dt}[/tex] = 4 in/sec
When the length is 8 inches and the width is 6 inches, we get;
[tex]\dfrac{dV}{dt} = \dfrac{d}{dt} \left(l\cdot w \cdot h\right)[/tex]
[tex]\dfrac{dV}{dt} =h\times \left(l\cdot \dfrac{dw}{dt} + w \cdot \dfrac{dl}{dt} \right)[/tex]
When l = 8, and w = 6, we get;
[tex]\dfrac{dV}{dt} =10\times \left(8\times 4 + 6 \times 2 \right)=440[/tex]
The rate at which the volume of the rectangular box is changing in cubic inches per second is therefore;
[tex]\dfrac{dV}{dt} =440 \ in^3/sec[/tex]
Learn more about the rate of change of a function here:
https://brainly.com/question/8728504
#SPJ1
How do you describe the transformation of Y x2?.
The transformation of y = x² can be described as, Right and left one and down one-half, right and left two and down two, and right and left three and down four and one-half are the points plotted from the vertex.
Define transformation.A transformation is a technique for moving or repositioning a shape. Every point in the shape is moved in the same direction and by the same amount. When a shape is rotated, a point is turned into the center. When a shape appears in a mirror line, it is said to be reflecting. When a shape is shifted a predetermined amount from its initial position, this is known as translation.
Given,
The transformation of y = x² can be described as,
A vertical stretch is the name for this change. Transformation of y = x² can be described as. Right and left one and down one-half, right and left two and down two, and right and left three and down four and one-half are the points plotted from the vertex.
To learn more about transformation, visit:
https://brainly.com/question/11709244
#SPJ4
What are the 3 linear functions?.
There are three major forms of linear equations:
point-slope form, standard form, and slope-intercept form.Point slope form:
The point-slope form, as its name suggests, identifies a point on a line and its slope. Not frequently is this form provided to assist with line graphing. To get from a verbal or visual representation of a line to its slope-intercept or standard form, however, is where it is more frequently utilized.
Slope intercept form:
A line's slope and y-intercept are communicated using the slope-intercept form. Technically speaking, it is an exception to the point-slope form.
Standard form:
An equation's conventional form is as follows:
Ax+By=C
Where A is not a negative number and B, C, and all three are whole numbers.
Hence we get the required answer.
Learn more about Linear equations here:
brainly.com/question/4074386
#SPJ4
After analyzing this data set, francine calculates a value of 20. 73 g. Which of these characteristics has been calculated? mean median mode range.
The correct answer is mean.
The characteristic which is being calculated here is the mean or the average of the data set.
(20.73 + 20.76 + 20.68 + 20.75)/4
when we divide it by 4 because there are four data sets
= 82.92 / 4
= 20.73
The complete question is 'Francine makes several measurements of the mass of a metal block and the data set is shown in the table below. The measurement mass of metal blocks(g) are a) 20.73 b) 20.76 c) 20.68 d) 20.75 . After analyzing the given data set, Francine calculates a value of 20.73 g so which of these characteristics has been calculated?'
To know more about 'mean' related questions
visit- https://brainly.com/question/3714697
#SPJ4
Let R Be A Relation On A Set A. Prove The Following: A) If R Is Reflexive, Then R-1 Is Reflexive. B) If R Is Symmetric, Then R-1 Is Symmetric. C) If R Is Transitive, Then R-1 Is Transitive. 3. Let R Be A
By using the concept of relation, it can be proved that
If R is a Reflexive relation, then [tex]R^{-1}[/tex] is a Reflexive relation
If R is a Symmetric relation, then [tex]R^{-1}[/tex] is a Symmetric relation
If R is a Transitive relation, then [tex]R^{-1}[/tex] is a Transitive relation
What is a relation?
Relation on a set [tex]X_1, X_2,....,X_n[/tex] is the subset of the cartesian product
[tex]X_1 \times X_2 \times..... \times X_n[/tex]
A)
Let R be a reflexive relation .
Let (x, x) ∈ R
Then (x, x) ∈ [tex]R^{-1}[/tex]
So [tex]R^{-1}[/tex] is reflexive
B)
Let R be a symmetric relation such that [tex]xR^{-1}y[/tex] holds
so yRx holds
Since R is symmetric, xRy holds
[tex]yR^{-1}x[/tex] hold
[tex]R^{-1}[/tex] is symmetric
C)
Let R be a transitive relation such that [tex]xR^{-1} y[/tex] and [tex]yR^{-1}z[/tex] holds
Then yRx and zRy holds
Since R is transitive
zRx holds
[tex]xR^{-1}z[/tex] holds
[tex]R^{-1}[/tex] is transitive
To learn more about relation, refer to the link-
https://brainly.com/question/24779057
#SPJ4
Complete Question
Let R Be A Relation On A Set A. Prove The Following: A) If R Is Reflexive, Then [tex]R^{-1}[/tex] Is Reflexive. B) If R Is Symmetric, Then [tex]R^{-1}[/tex]Is Symmetric. C) If R Is Transitive, Then [tex]R^{-1}[/tex] Is Transitive.
5x+6y=6 Put the following equation of a line into slope-intercept form, simplifying all fractions.
The slope intercept form of the given line equation is y=-5/6 x+1.
The given equation of a line is 5x+6y=6.
The slope intercept form of a straight line is one of the most common forms used to represent the equation of a line. The slope intercept formula can be used to find the equation of a line when given the slope of the straight line and the y-intercept.
The standard form of the slope intercept form is y=mx+c.
Here, the equation can be written in slope intercept form as
5x+6y=6
6y=6-5x
y=-5/6 x+1
Therefore, the slope intercept form of the given line equation is y=-5/6 x+1.
To learn more about the slope intercept form visit:
brainly.com/question/9682526.
#SPJ6
I really need help to get this done, please.
Answer:
The area of the base of the cylinder (the circle face) is the same as the area of the base of the prism (the triangle face).
Step-by-step explanation:
The volume of a prism is the area of the base of the prism multiplied by its height.
The volume of a cylinder is the area of the base of the cylinder multiplied by its height.
So because the volumes are both equal, and the heights are both equal
Then the area of the bases should also be equal.
Which equation shows the point-slope form of the line that passes through 3 2 and has a slope of 1 3?.
The point-slope form of the line is y - 2 = 1/3(x - 3).
What is slope ?
A line's steepness is determined by its slope. In mathematics, slope is determined by "rise over run" (change in y divided by change in x).
An equation is a mathematical statement that proves two mathematical expressions are equal in algebra, and this is how it is most commonly used. In the equation 3x + 5 = 14, for instance, the two expressions 3x + 5 and 14 are separated.
The equation of the line into point slope-form is equal to
y - y1 = m(x - x1)
slope(m) = 1/3
(3,2)....x1 = 3 and y1 = 2
now we sub
y - 2 = 1/3(x - 3)
To learn more about the slope from the given link
https://brainly.com/question/16949303
#SPJ4
say whether the given pair of events is independent, mutually exclusive, or neither. a: your first coin flip results in heads. b: your second coin flip results in heads.
independent
mutually exclusive
neither
The given pair of events are independent when your first coin flip results in heads. and your second coin flip results in heads.
Events that occur independently of any other events are referred to as independent events. if we flip a coin in the air and get the head, we will then flip the coin again, but this time we will get the tail. The occurrence of both events is unrelated in either instance. Tossing the coin the first time does not affect the outcome of the second toss.
Note that the events are not mutually exclusive as it is possible that both the first and the second toss are headed.
know more about independent events here: https://brainly.com/question/12619550
#SPJ4
Two players, A and B alternatively toss a fair coin (A tosses the coin first, then B tosses the coin, then A, then B and so on). The sequence of heads and tails is recorded. If there is a head followed by a tail (HT sub-sequence), the game ends and the person who tosses the tail wins. What is the expected length of this game? Let T number of coin tosses until the game ends. Find E(T). Round answer to 3 decimals
The E(T) is 4 when A and B, two players, alternately toss a fair coin (A tosses the coin first, then B tosses the coin, then A, then B and so on).
Given that,
A and B, two players, alternately toss a fair coin (A tosses the coin first, then B tosses the coin, then A, then B and so on). The heads and tails are recorded in order. The game is over and the winner is the person who throws the tail if there is a head followed by a tail (HT sub-sequence).
We have to find what is the anticipated game length. Let the game continue for T number of coin tosses. Find E (T).
We know that,
Here,
E(T )=first time sequence HT occurs
E(T) = P(first H)× P(expected number till 1st T |first H)+ P(first T)× P(expected number till 1st HT |first T)
E(T) =0.5×(1+2)+0.5×(1+E(T))
0.5×E(T)=0.5×4
E(T) =4
Therefore, The E(T) is 4 when A and B, two players, alternately toss a fair coin (A tosses the coin first, then B tosses the coin, then A, then B and so on).
To learn more more about coin visit: https://brainly.com/question/5495713
#SPJ4
Determine which set of side measurements could be used to form a triangle. 9, 13, 21 8, 9, 18 3, 18, 21 2, 5, 9
The set of side measurements that could be used to form a triangle is 9, 13, 21.
A triangle is a polygon with three sides and three vertices.
To know if a set of number is a valid measure of the sides of a triangle, it must follow the Triangle Inequality Theorem which states that the sum of any two sides must be greater than the third side, such that a + b > c, a + c > b, and b + c > a.
9, 13, 21 : 9 + 13 > 21 ; 13 + 21 > 9 ; 9 + 21 > 13
8, 9, 18 : 8 + 9 < 18
3, 18, 21 : 3 + 18 = 21
2, 5, 9 : 2 + 5 < 9
Hence, the side measurements 9, 13, 21 is the only set that can be used to form a triangle.
Learn more about triangles here: https://brainly.com/question/28562743
#SPJ4
how many integers fall between the square root of 7 and the square root of 77 on a number line
Answer:
There are 6 integers between sqrt7 and sqrt77.
Step-by-step explanation:
Sqrt9, sqrt16, sqrt25, sqrt36, sqrt49, sqrt64 are all between sqrt7 and sqrt77. Since these are all perfect squares, they simplify to integers.
sqrt9 = 3
sqrt16 = 4
sqrt25 = 5
sqrt36 = 6
sqrt49 = 7
sqrt 64 = 8
There are 6 integers between sqrt7 and sqrt77.
Based on the results of the simulation, which of the following is closest to the probability that at least 2 thumbtacks land pointing up when 5 thumbtacks are tossed?
A 0.09
B 0.19
C 0.28
D 0.72
E 0.91
The correct option C 0.28; for the probability that at least 2 thumbtacks land pointing up when 5 thumbtacks are tossed.
Explain the term binomial probability distribution?A popular probability distribution known as the binomial distribution simulates the likelihood of getting one of two outcomes given a set of parameters. It totals the number of trials whenever the trial has an equal chance of producing a particular result.This problem involves a binomial probability distribution.
Now that five thumbtacks have been thrown, we want to determine the likelihood that at least two of them will land pointing up. As it is written;
P(X ≥ 2) = P(2) + P(3) + P(4) + P(5)
Based on the histogram
P(5) = 0.02
P(4) = 0.02
P(3) = 0.05
P(2) = 0.19
So,
P(X ≥ 2) = 0.19 + 0.05 + 0.02 + 0.02
P(X ≥ 2) = 0.28
Thus, the probability that at least 2 thumbtacks land pointing up when 5 thumbtacks are tossed is 0.28.
To know more about the binomial probability distribution, here
https://brainly.com/question/24756209
#SPJ4
A thumbtack that is tossed can land point up or point down. The probability of a tack landing point up is 0.2. A simulation was conducted in which a trial consisted of tossing 5 thumbtacks and recording the number of thumbtacks that land point up. Many trials of the simulation were conducted and the results are shown in the histogram.
Based on the results of the simulation, which of the following is closest to the probability that at least 2 thumbtacks land pointing up when 5 thumbtacks are tossed?
A 0.09
B 0.19
C 0.28
D 0.72
E 0.91
Find the missing length. (the ?)
In the given triangle, the length of missing side is 15.
What is a triangle?A triangle is a geometric figure with three edges, three angles and three vertices. It is a basic figure in geometry.
The sum of the angles of a triangle is always 180°
In the given triangle,
Side BD = 5, CE = 3 and AE = 9
Let the side AD is x,
Since, line BC and DE and parallel to each other,
Therefore, by side splitter theorem,
A line that is parallel to one side of a triangle and crosses the other two sides equally divides the side in proportional ratio.
Implies that,
AD/BD = AE/EC
x/5 = 9/3
x/5 = 3
x = 15
The value of side AD is 15.
To know more about Triangle on:
https://brainly.com/question/2773823
#SPJ1
How do you show that a function is a linear function?.
The approach to identify linear functions is whether the change in y will always have the same value for any given change in x.
Possibly the most significant mathematical function is the linear function. One of the simplest functions to comprehend, it frequently appears when you least expect it. We frequently turn more complex functions into linear functions for understanding purposes since it is so convenient to do so. The linear function is incredibly straightforward for one variable. A linear function is one with the formula f(x)=ax, where an is a real number of any value. The parameter an is the slope of the line through the origin that makes up the graph of the function f.
learn more about linear function here
https://brainly.com/question/21107621
#SPJ4
-5-4-3
Mark this and return
y
5
4+
3+
2+
14
T
-2-
-3-
4
-5
1 2 3 4 5
X
What is the domain of the function on the graph?
all real numbers
all real numbers greater than or equal to 0
all real numbers greater than or equal to -2
all real numbers greater than or equal to -3
Save and Exit
Next
Submit
The answer is all real numbers greater than or equal to -3, as domain and range.
What is the domain and range of function?
A function's domain and range are its components. A function's range is its potential output; its domain is the set of all conceivable input values. Domain, Function, and Range. If a function f: A B exists that maps every element in A to an element in B, then A is the domain and B is the co-domain. The image of an element 'a' under a relation R is provided by 'b,' where (a,b) R. The set of photographs makes up the function's range.
The domain of a relation or a function is the set of all possible values for an input in that relation/function.
The range of a relation or function is the set of all possible values that can be the result of a relation or function.
From the graph, nothing can be seen on the left side of x = - 3 and the graph is continuous and going in the direction of infinity on the right side of the x axis.
Hence all real numbers greater than or equal to -3
Learn more about Domain and Range, by the following link.
brainly.com/question/1942755
#SPJ1
