Mass of 7.64 x 10^25 molecules of l₂ is 3.04 grams
Calculation of mass here we are doing from the number of molecules given. To do so we use the Avogadro's number. Avogadro's number is one of the most fundamental constants of chemistry. It helps us to compare the different atoms or molecules of given substances where the same number of atoms or molecules are being compared.
Along with that we will also be using the number mole as well here. number of moles is nothing but the given mass divided by the molecular mass of the compound.
To solve the above given question we use the below given formulas;
number of molecules = Number of moles × Avogadro number
Number of moles = Number of molecules
Avogadro number
⇒ 7.64×[tex]10^{25}[/tex] = 0.012 moles
6.023×[tex]10^{23}[/tex]
Mass = Number of moles × Molecular mass
⇒ 0.012 × 253.80 = 3.045 grams
To know more about mass
https://brainly.com/question/1989505
#SPJ1
thsof
is which acid H2S04
Explanation:
H2So4=sulphuric acid , strong acid
Arrange methanoic acid, methanol and methylamine in order of increasing boiling point
Answer: CH3-CO-CH3<CH3-CH2-OH<CH3-COOH
Explanation:
basically the boiling point depends upon the intermolecular hydrogen bonding. thus alcohol tends to have a higher boiling points then ketones because they have -OH group unlike carbonyl.
how to increase rate of the reaction "nitrogen with hydrogen"
The reactants' concentration needs to be raised.
What factors influence rate of reaction?
The rate of the reaction controls how quickly the chemical reaction moves forward. The reaction's rate is influenced by a number of variables. These elements are:
(i) The concentration of the reactant: As the reactant concentration rises, the reaction rate does as well.
(ii) The reactant's nature. The condition, reactivity, or solution type of the reactants all have an impact on the reaction's pace.
(iii)The pressure of the gases: As the pressure of the gases involved in a reaction rises, so does its rate.
(iv) The surface area of the solids—As exposed surface area increases, so does the rate of reaction.
Therefore, if we to speed up the process, she should raise the reactant concentration since the more reactant molecules there are, the more molecules will actually collide, which will enhance the rate of the reaction.
To learn more about reaction rate, click on link below
https://brainly.com/question/12904152
#SPJ1
What summarizes the process of cellular respiration in plants and animals
In both plants and animals, the process of cellular respiration may be broken down into the following steps: Oxygen + carbon dioxide.
When plant cells undergo cellular respiration, oxygen is taken in through the plant's leaves from the surrounding atmosphere, and carbon dioxide is exhaled back into the atmosphere as a byproduct of the process. In contrast, when animal cells undergo cellular respiration, oxygen is taken in through the lungs, and carbon dioxide is exhaled through the lungs.
Therefore, a quick review, throughout the process of cellular respiration, plants and animals trade oxygen and carbon dioxide with one another.
Therefore, we may draw the following conclusion: Oxygen + carbon dioxide is a shorthand for the process of cellular respiration in plants and animals.
Know more about cellular respiration at,
https://brainly.com/question/13721588
Question: Children in a tree house lift a small dog in a basket 3.95 m up to their house. If it takes 221 J of work to do this, what is the combined mass of the dog and basket?
Express your answer using three significant figures.
Answer: M = ? kg
The combined mass of the dog and the basket is equal to 5.71 Kg.
What is work?Work can be described as the energy used when applying a force to move an object through a definite displacement.
The work done by a force to move an object through a displacement can be represented as:
W = F.dcosθ
Where θ is angle between displacement and force.
Given, the height the basket lifted up, d = 1.4 m
The angle between force and displacement, θ = 0°
Thus, the work done when lifting the basket is:
W = F d cosθ
W = mg.d cosθ
W = mg.d cos0°
m = W/gd
m = 221/(9.8).(3.95)
m = 5.71 Kg
Therefore, the mass of the basket and dog is equal to 5.71 Kg.
Learn more about work, here:
brainly.com/question/13662169
#SPJ1
425 L of chlorine at 32° C will occupy what volume at -15° C while the
pressure remains constant?
502.4 L
185.2 L
O 199.2 L
359.5 L
*
2 points
According to the solution 359.5 L volume at -15° C while the pressure remains constant.
What kind of force is pressure?The definition of force in physics is The push or pull on a massed object alters its velocity. An external factor is an agent that has the power to alter the resting or moving condition of a thing. It has a path and a magnitude.
Briefing:Initial volume of chlorine gas = 425 L
Initial temperature = 32°C
Final volume = ?
Final temperature = -15°C
Solution
Initial temperature = 32°C (32+273 = 305 K)
Final temperature = -15°C (-15 +273 = 258 K)
The Charles Law will be used to resolve the presented issue.
This equation states that at constant pressure and molecular number, the volume of a given amount of a gas is precisely proportional to its temperature.
V₁/T₁ = V₂/T
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
We will now enter the values into the formula.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
V₂ = 425 L× 258 K /305 K
V₂ = 109650 L.K / 305 K
V₂ = 359.5 L.
To know more about Pressure visit:
https://brainly.com/question/356585
#SPJ13
Name one thing that we use in everyday life that uses either a magnetic field or an electric field.
A common thing in everyday life that uses the magnetic field or an electric field is the transformer.
What is a magnetic field?The term magnetic field is the region that is around a magnet where there is a the influence of a magnetic. Also, the region around a charge where the influence of the charge can be felt is called the electric field.
Most of the devices that we have at home do have a transformer such as a radio set and a television set. The transformer that is in this appliance causes the regulation of voltage in the appliance.
The transformer works on the principle of the magnetic field and the electric field.
Learn more about magnetic field:https://brainly.com/question/14848188
#SPJ1
What is the pH of 3.9 M potassium fluoride?
Round your answer to 2 decimal places.
The pH of the 3.9M of pottasium fluoride is 0.591.
How to calculate pH?pH of a solution can be described as the figure expressing the acidity or alkalinity of a solution on a logarithmic scale on which 7 is neutral, lower values are more acid and higher values more alkaline.
The pH of a solution can be calculated by using the following expression:
pH = -log {H}
Where;
H = hydrogen ion concentrationAccording to this question, a 3.9 M potassium fluoride is given. The pH can be calculated as follows:
pH = - log {3.9}
pH = -0.591
Therefore, the pH of the solution is 0.591
Learn more about pH at: https://brainly.com/question/11300720
#SPJ1
0.620 L of a 2.6 MKCl solution Express your answer using two significant figures.
The number of moles in 0.620 L of a 2.6M KCl solution is 1.61 moles.
How to calculate number of moles?Molarity is the concentration of a substance in solution, expressed as the number of moles of solute per litre of solution.
The molarity of a solution can be calculated by dividing the number of moles of the substance by its volume as follows:
no of moles = molarity × volume
According to this question, 0.620 L of a KCl solution has a molarity of 2.6 M. The number of moles of the substance is as follows:
no of moles = 2.6M × 0.620L = 1.612moles
Therefore, 1.61 moles is the number of moles in the pottasium chloride solution.
The incomplete question is as follows:
Determine the number of moles contained in 0.620L of a 2.6 M KCl solution.
Learn more about moles at: https://brainly.com/question/16386473
#SPJ1
what has the biologist Rahul Kumar came to India to find
It is to be noted that Rahul Kumar the biologist came to India to find problems that he can solve using his knowledge in Biology.
Who is Rahul Kumar?Rahul Kumar, an Indian and the son of a migrant worker from Bihar, graduated with honors from IIT Roorkee and is currently on his way to the United States to pursue his PhD at the University of Utah.
A biologist is a scientist who undertakes biological study. Biologists are interested in researching all forms of life on Earth, whether they be single cells, multicellular organisms, or communities of interacting individuals. They often specialize in a single field of biology and have a specialized research emphasis.
The majority of biologists work full-time at government agencies, private research laboratories, medical testing facilities, higher education institutions, or other research facilities.
Physician's assistants, radiation and nuclear medicine technologists, and registered nurses are among the hospital employment available to those with a bachelor's degree in biology. These positions can also be found in clinics, physicians' offices, nursing homes, rehabilitation institutions, government organizations, the military, and other settings.
Learn more about biologist:
https://brainly.com/question/14887111
#SPJ1
The autoionization of water is a reversible reaction.
2H₂O ⇌ H3O⁺ + OH⁻
This reaction is endothermic (ΔH is positive).
What is the effect of increasing temperature of water on:
The numerical value of Kw
Answer 1
Choose...
pH
Answer 2
Choose...
[H3O+ ]
Reaction will move forward and favor according to Le Chatelier's principle on increasing temperature of water.
According to Le Chatelier's principle, the position of equilibrium will shift if a system in a state of dynamic equilibrium is disturbed by a change in its conditions. The point of equilibrium will shift toward the products to offset the additional reactant if you raise the concentration of one of the reactants. For instance, extra N2 will react with H2 in the system if it is added. More ammonia will be produced as a result of this.
Similar to this, the location of equilibrium would move to the left if you reduced the concentration of one of the reactants. In this instance, removing N2 would cause more NH3 to break down into the reactants.
To know more about Le Chatelier's principle visit https://brainly.com/question/2001993
#SPJ1
The atomic weight of element A is 88.7 if the element consist of two Isotopes that have mass number 88 and 92. what is the approximate % natural abundance of the heaviest Isotope?
Answer: 17.5 %
Write the equation for relative Atomic mass in terms of an ( 'a' being one isotope's mass) and solve for x:
88.7 = [tex]\frac{(a * 88) + ((100 - a) * 92)}{100}[/tex]
8870 = 88*a + 9200 - 92 * a
4*a = 330
a = 82.5
Find the value of b using a,
100 - a = b
100 - 82.5 = b
b = 17.5
So, the % abundance for the isotope with mass number 88 is 82.5% and the % abundance for the isotope with mass number 92 is 17.5% .
To learn more about natural abundance,
https://brainly.com/question/13187634
I need help with this
bace, acid and I'd not
bace, acid
There are 0.05216 mol ZnSO4 and
0.3609 mol H2O in the sample.
Step 3: Divide each by the smallest number
of moles to get the ratio.
What is the ratio of ZnSO4:H2O?
[?]
mol ZnSO4: [?] mol H2O
The ratio of mol of ZnSO₄ : mol H₂O is 1:7.
Empirical formula- The relative ratios of the various atoms in a compound are given by an empirical formula. The ratios are still valid at the molar level. As a result, H₂O is made up of two hydrogen and one oxygen atoms. Similar to how 2.0 moles of hydrogen and 1.0 mole of oxygen make up 1.0 mole .
Steps to determine Empirical formula-
Determine the masses in Step 1. Step 2: Multiply the grams by the atomic mass to get the number of moles. Step 3: Subtract the smallest number of moles from the total number of moles of each element. Step 4: Make entire numbers out of the numbers.
Given,
0.05216 mol of ZnSO₄
0.3609 mol of H₂O
Here, the smallest number of mole is 0.05216.
Dividing each by the smallest number of moles to get the ratio -
⇒ 0.05216/ 0.05216 = 1
⇒ 0.3609/ 0.05216 = 6.91 ≈ 7
Therefore the mol ratio of ZnSO₄ and H₂O are 1 and 7 respectively.
Hence, 1 mol ZnSO₄ : 7 mol H₂O.
To learn more about Empirical formula refer- https://brainly.com/question/14318768
#SPJ1
An arctic weather balloon is filled with 30.6 L of hellum gas inside a prep shed. The temperature inside the shed is 12. °C. The balloon is then taken outside,
where the temperature is -28. °C. Calculate the new volume of the balloon.
You may assume the pressure on the balloon stays constant at exactly 1 atm. Be sure your answer has the correct number of significant digits.
The new volume of the balloon is 26.307L. This can be solved with the help of Charles' law.
What is Charles' law?
According to the Charles' law, the volume of the gas is directly proportional to the temperature at constant pressure.
Here we assume that the pressure is constant in both the cases.
V1/T1 = V2/T2
30.6L/285.15K = V2/245.15K
V2= 26.307L.
Therefore, the new volume at -28 degree Celsius and constant 1 atm pressure is 26.307L according to Charles' law.
To learn more about Charles' law from the given link https://brainly.com/question/13869084
#SPJ13
What is the solubility of MgCO₃ in a solution that contains 0.055 M Mg²⁺ ions? (Ksp of MgCO₃ is 3.5 × 10⁻⁸)
The solubility of MgCO₃ in a solution that contains 0.055 M Mg²⁺ ions is 6.36 * 10⁻⁷.
What is the solubility of a solution?The solubility of a solution is the amount of solute present in a given volume of solvent.
The solubility of MgCO₃ in a solution that contains 0.055 M Mg²⁺ ions is calculated from the dissociation equation for the reaction given below:
MgCO₃ (s) → Mg²⁺ (aq) + CO₃²⁻ (aq)The solubility product constant, Ksp = [Mg²⁺] * [CO₃²⁻]
At equilibrium, [Mg²⁺] = 0.055 + x
[CO₃²⁻] = x
Assuming x is <<< 0.055, hence 0.055 + x = 0.055
Ksp = 0.055 * x
x = Ksp / 0.055
x = 3.5 × 10⁻⁸ / 0.055
x = 6.36 * 10⁻⁷
Hence, the solubility of MgCO₃ = 6.36 * 10⁻⁷
Learn more about solubility at: https://brainly.com/question/24124376
#SPJ1
Choose the colder temperature.
A) -30°F
B) 20°F
[tex]-6.66^{0} C[/tex][tex]-30.4^{0} C[/tex]Between the two options, the option A shows the colder temperature, that is [tex]-30^{o}[/tex] F.
How to determine the colder temperature?
Both Fahrenheit and Celsius employ different temperatures as the water's freezing and boiling points, as well as differing sizes for their degrees. While water freezes at zero degrees Celsius and boils at one hundred degrees C, it does so at 32 degrees Fahrenheit and two hundred and twenty degrees F, respectively. You can see that although Fahrenheit has 180 ° between the freezing and boiling extremes, Celsius has 100 degrees. The difference between one degree Celsius and one degree Fahrenheit is 1.8.
On converting [tex]-30^{o}[/tex] F to Celsius we get, [tex]-30.4^{0} C[/tex]
and on converting [tex]20^{o} F[/tex] to Celsius, we get, [tex]-6.66^{0} C[/tex]
Hence, we can say [tex]-30.4^{0} C[/tex] is colder temperature than [tex]-6.66^{0} C[/tex].
To know more about temperature scale, visit:
https://brainly.com/question/1373930
#SPJ1
How many grams of NCI3
are in 4.00 moles of NC13?
The mass of NCl3 in 4.00 moles of NCl3 is 481.44 grams
Mole is defined as the amount of the substance containing the same number of discrete entities (atoms, molecules, ions, etc) as there are atoms in a sample of pure 12C weighing exactly 12g. The number of particles present in one mole of any substance =Avogadro Number=6.
The formula for number mole is given as:
Number of moles = Mass of the substance ; Now substituting the values
Molar mass
⇒ 4.00 = x [Molar mass of NCl3 = 120.36]
120.36
⇒ x = 4.00 × 120.36
⇒ x = 481.44 grams
Therefore the mass of NCl3 is 481.44 grams
To know more about mole concept
https://brainly.com/question/23059935
#SPJ1
classification of Sulfur Dioxide
Sulfur Dioxide, (SO2), is an inorganic compound, a heavy colorless poisonous gas.
Sulfur dioxide has a pungent, irritating odor, familiar as the smell of a just-struck match. It is produced in huge quantities in an intermediate setup. Occurring in nature in volcanic gases and in solution in the waters of some warm springs, sulfur dioxide usually is prepared industrially by the burning in air or oxygen of sulfur or such compounds of sulfur as iron pyrite or copper pyrite.
In the atmosphere, it can combine with water vapor to form sulfuric acid, a major component of acid rain. In the laboratory the gas may be prepared by reducing sulfuric acid (H2SO4) to sulfurous acid (H2SO3), which decomposes into water and sulfur dioxide, or by treating sulfites (salts of sulfurous acid) with strong acids, such as hydrochloric acid, again forming sulfurous acid.
Sulfur dioxide can be liquefied under moderate pressures at room temperatures; the liquid freezes at −73° C (−99.4° F) and boils at −10° C (14° F) under atmospheric pressure. Although its chief uses are in the preparation of sulfuric acid, sulfur trioxide, and sulfites, sulfur dioxide also is used as a disinfectant, a refrigerant, a bleach, and a food preservative, especially in dried fruits.
Molecular Formula: SO2
Molecular Weight: 64.07
To know more about Sulfur Dioxide:
https://brainly.com/question/7072447
For this experiment, various solutions were compared to look for precipitation or bubbling. What is the independent variable in the experiment?
A. the precipitates or bubbles
B. all the solutions
C. only the pickle crisp and vinegar
Answer:
A
Explanation:
Independent variable: the surface of the slope rug, bubble wrap and wood
For this experiment, various solutions were compared to look for precipitation or bubbling. The precipitates or bubbles are the independent variable in the experiment. Therefore, option B is correct.
What is precipitation ?The term precipitation is defined as a solid produced by a change in a solution, often due to a chemical reaction or change in temperature that decreases solubility of a solid.
A substance separated from a solution or suspension by chemical or physical change, usually as an insoluble amorphous or crystalline solid.
A compound may precipitate when its concentration exceeds its solubility. This can be caused by temperature changes, solvent evaporation, or solvent mixing. A strongly supersaturated solution precipitates more quickly.
Independent variable are the surface of the slope rug, bubble wrap and wood.
Thus, option B is correct.
To learn more about the precipitation, follow the link;
https://brainly.com/question/18109776
#SPJ2
724.4g of ammonium phosphate in 4500 mL of alcohol. what is the molarity?
The molarity of the 724.4g of ammonium phosphate in 4500 mL of alcohol is 1.0804m.
Ammonium phosphate [tex]$\Rightarrow\left(\mathrm{NH}_4\right)_3 \mathrm{PO}_4$[/tex]
GMM of Ammonium Phosphate [tex]$\Rightarrow 109 \mathrm{~g}+40 \mathrm{~g}$[/tex] [tex]$\Rightarrow 149 \mathrm{~g}$[/tex]
No. of moles of Ammonium Phosphate [tex]$\Rightarrow\left\{\frac{724.4}{149}\right\} \Rightarrow 4.8$[/tex]
Molarity = 4.86/4.5 = 1.0804m.
Phosphates are low in toxicity, however they create nutrient contamination and nourish algae. Eutrophication and hazardous algal blooms result as a result of this. Many countries, notably the European Union and the United States, have outlawed the use of phosphates in detergent.
To learn more about Molarity visit:https://brainly.com/question/8732513
#SPJ9
What is the density of an object that has a mass of 6.2 g and a volume of 4.4 mL ?
Density=mass/volume
d=6.2/4.4
d=1.40 grams/cm³
What is the pH of a solution that is 0.21 M sodium fluoride and 0.57 M hydrofluoric acid?
The pH of a solution that is 0.21 M sodium fluoride and 0.57 M hydrofluoric acid is 3.36.
given the data as follows :
sodium fluoride ( base ) = 0.21 M
hydrofluoric acid ( acid )= 0.57 M
using the Henderson - Hassel Balch equation we get:
pH = pKa + log (base / acid)
pKa of hydrofluoric acid = 3.8
∴ pH = 3.8 + log ( 0.21 / 0.57 )
pH = 3.8 + ( - 0.4341)
pH = 3.36
Thus, The pH of a solution that is 0.21 M sodium fluoride and 0.57 M hydrofluoric acid is 3.36.
To learn more about pH here
https://brainly.com/question/491373
#SPJ1
An element is a substance formed of
Answer:
the same kind of atoms
Explanation:
the same kind of atoms
7. Help question is in picture below!
The equation of the reaction can be obtained as the net ionic equation of the reaction is; [tex]Fe^{2+} (aq) + CO_{3} ^{2-} (aq) ----- > Fe CO_{3} (s)[/tex]
What is the net ionic equation of the reaction?The term net ionic equation has to do with the fact that we have considered the is that did not participate in the reaction. These ions that did not change in the course of the reaction are called the spectator ions in the reaction.
As we look at the reaction, we can see that ions that did not change in the reaction are the chlorate ion and the sodium ion. Thus the net ionic equation can be written as; [tex]Fe^{2+} (aq) + CO_{3} ^{2-} (aq) ----- > Fe CO_{3} (s)[/tex].
Learn more about net ionic equation:https://brainly.com/question/15466794
#SPJ1
24. The thumbprint-shaped region on the pressure/enthalpy
chart is called the
A. saturation curve.
B. saturation cycle.
C. superheated curve.
D. superheated region.
The thumbprint-shaped region on the pressure/enthalpy chart is called saturation curve
An enthalpy chart show the A/C cycle and at what temprature and pressure the refrigerant changes from gas to liquid and back to gas and the vapor liquid saturation curve of the pure substances is important from both the practical and thermodynamic viewpoint because it provide basic information on the behavior of the fluid as well as on its properties and the loop is the most common type of fingerprint and the ridges form elongated loop and some people have double loop fingerprint
Know more about pressure/enthalpy
https://brainly.com/question/17074575
#SPJ9
The preexponential and activation energy for the diffusion of iron in cobalt are 1.1 × 10−5 m2/s and 253,300 J/mol, respectively. At what temperature will the diffusion coefficient have a value of 2.1 × 10−14 m2/s?
The temperature is obtained as 1517 K.
What is the temperature?We know that we asked here to find the temperature at which we are going to have a diffusion coefficient of 2.1 × 10−14 m2/s. Let us look at the following from the question;
D = diffusion coefficient = 2.1 × 10−14 m2/s
[tex]D_{o}[/tex] = pre-exponential constant = 1.1 × 10−5 m2/s
[tex]E_{a}[/tex] = Activation energy = 253,300 J/mol
R = Gas constant = 8.314 J/mol.K
T = temperature = ??
Then;
log D= log [tex]D_{o}[/tex] - Ea/2.303RT
log(2.1 × 10−14) = log( 1.1 × 10−5) - 253,300/2.303 * 8.314 * T
log(2.1 × 10−14) / log( 1.1 × 10−5) = - 253,300/2.303 * 8.314 * T
T = - 253,300/-8.719 * 2.303 * 8.314
T= 1517 K
Learn more about diffusion coefficient:https://brainly.com/question/14921285
#SPJ1
35.0 L of an ideal gas at 268 K and 5.16 atm are heated to 343 K with a new pressure of 7.65 atm. What is the new volume (in L)?
From the calculations, the new volume of the gas is 30.2 L.
What is the new volume?We know that we can be able to obtain the parameters that ahs to do with the gas by use of any of the equations of the laws that relate to an ideal gas.
Given that the;
Initial volume [tex]V_{1}[/tex] = 35.0 L
Initial temperature [tex]T_{1}[/tex] = 268 K
Initial pressure [tex]P_{1}[/tex] = 5.16 atm
Final temperature [tex]T_{2}[/tex] = 343 K
Final pressure [tex]P_{2}[/tex] = 7.65 atm
Final volume [tex]V_{2}[/tex] = ??
Then we have to use the general gas equation;
[tex]P_{1}[/tex] [tex]V_{1}[/tex]/ [tex]T_{1}[/tex]= [tex]P_{2}[/tex] [tex]V_{2}[/tex]/ [tex]T_{2}[/tex]
[tex]V_{2}[/tex] = 5.16 * 35.0 * 343/7.65 * 268
[tex]V_{2}[/tex] = 61945.8/2050.2
[tex]V_{2}[/tex] = 30.2 L
Learn more about gas laws:https://brainly.com/question/12669509
#SPJ1
Is the structure of C4H6 rigid? (i.e. is it unable to rotate/move?) If not, which part of the molecule is not rigid? Try to describe the shape of this molecule.
The molecular structure of C4H6 rigid is Not rigid.
The Schrödinger equation, a quantum mechanical equation for the motion of electrons in the field of nuclei, can theoretically be used to identify the molecule structure. The bond lengths and bond angles in a molecular structure are those where the molecular energy is lowest. The numerical solution of the Schrödinger equation to determine structures has developed into a highly developed technique requiring the use of computers and supercomputers.
Either either neutron diffraction or microwave vibration-rotation spectra are used to determine the nuclear locations within a molecule. X-ray diffraction investigations can be used to analyse the electron cloud that surrounds a molecule's nucleus.
To know more about molecular structure visit : https://brainly.com/question/512689
#SPJ1
I need help on #10 please
Answer:
Na,Ba,Ti,on their placement on the periodic table...
