what is the mass of 26.8l ozone gas (o3) at stp? round to 3 significant figures.

Answers

Answer 1

The mass of 26.8L ozone gas (O3) at STP is 72.7 g. Therefore, the mass of 26.8L ozone gas (O3) at STP is 72.7 g.

Given that the volume of ozone gas (O3) is 26.8L.The formula for the mass of any gas is:m = DRT/PM, where D is the density of the gas at STP,R is the gas constant, T is the temperature at STP, and P is the pressure at STP. At STP, T = 273 K, P = 1 atm, andD for ozone gas (O3) is 2.14 g/L.

Substituting these values, we get:m = 2.14 g/L × 273 K / 1 atm × 26.8 L × 48 g O3 / 1 mol= 72.7 g (rounded to 3 significant figures).Therefore, the mass of 26.8L ozone gas (O3) at STP is 72.7 g.

To know more about mass visit:

https://brainly.com/question/11954533

#SPJ11


Related Questions

Aqueous hydrochloric acid reacts with solid manganese(IV) oxide to form aqueous manganese(II) chloride, liquid water, and chlorine gas. Express your answer as a chemical equation. Identify all of the phases in your answer. Liquid pentane (C_5H_12) reacts with gaseous oxygen to form carbon dioxide and liquid water.

Answers

A chemical equation is a symbolic representation of a chemical reaction. It shows the reactants and products of the reaction, as well as the physical states of the reactants and products.

Reaction 1: 4HCl(aq) + MnO₂(s) → MnCl₂(aq) + 2H₂O(l) + Cl₂(g)

Reaction 2: C₅H₁₂(l) + 8O₂(g) → 5CO₂(g) + 6H₂O(l)

Aqueous phases are denoted by (aq), solid phases by (s), liquid phases by (l), and gas phases by (g).

Here is the explanation :

The chemical equation for the reaction between aqueous hydrochloric acid (HCl) and solid manganese(IV) oxide (MnO₂) is:

4HCl(aq) + MnO₂(s) → MnCl₂(aq) + 2H₂O(l) + Cl₂(g)

In this reaction, aqueous hydrochloric acid reacts with solid manganese(IV) oxide to form aqueous manganese(II) chloride, liquid water, and chlorine gas.

The chemical equation for the reaction between liquid pentane (C₅H₁₂) and gaseous oxygen (O₂) is:

C₅H₁₂(l) + 8O₂(g) → 5CO₂(g) + 6H₂O(l)

In this reaction, liquid pentane reacts with gaseous oxygen to form carbon dioxide (CO₂) and liquid water (H₂O).

Phases are indicated by (aq) for aqueous, (s) for solid, (l) for liquid, and (g) for gas.

To know more about the Phases refer here :

https://brainly.com/question/32302531#

#SPJ11

if 30 ml of a 0.80 m solution of k is mixed with 50 ml of a 0.45 m solution of clo−4, will a precipitate be observed? the ksp for the following equilibrium is 0.004. kclo4(s)↽−−⇀k (aq) clo−4(aq)

Answers

If 30 ml of a 0.80 m solution of k is mixed with 50 ml of a 0.45 m solution of clo−4, a precipitate will be observed in this solution.

The solution contains k (potassium) and clo−4 (chlorate) ions and we are to find out if a precipitate will form or not. The ksp for the following equilibrium is 0.004. kclo4(s)↽−−⇀k (aq) clo−4(aq)

We can obtain the molarity of k ions as follows: 0.80 M = (moles of K)/(0.030 L)Moles of K = 0.80 M × 0.030 L = 0.024 mol

We can obtain the molarity of clo−4 ions as follows: 0.45 M = (moles of clo−4)/(0.050 L)Moles of clo−4 = 0.45 M × 0.050 L = 0.0225 mol

The concentration of K and clo−4 ions are 0.8 M and 0.45 M respectively. Now, we need to calculate the reaction quotient Q of the solution to find out whether the precipitate will form or not. Q = [K+][clo−4] = 0.8 M × 0.45 M = 0.36

Since Q (0.36) > Ksp (0.004), the reaction quotient is greater than the solubility product constant. It indicates that the product is more than what it should be. The excess products will precipitate to form a solid. Hence, we can say that a precipitate will be observed in this solution.

More on precipitate: https://brainly.com/question/30904755

#SPJ11

rite a balanced chemical equation for the standard formation reaction of liquid acetic acid .

Answers

The formation of acetic acid can be represented using the chemical equation as follows;`CH₃COOH (l) ⇌ CH₃COO⁻ (aq) + H⁺ (aq)`

Acetic acid has a molecular formula of `CH₃COOH`, which is the simplest carboxylic acid. It can be formed in several ways, such as through the oxidation of ethanol, using bacteria, among other methods. When formed under standard conditions, its formation is represented by the balanced equation above.

The above equation shows that one molecule of liquid acetic acid (CH₃COOH) forms one hydronium ion (H⁺) and one acetate ion (CH₃COO⁻) in an aqueous solution. Since the reaction is reversible, the arrow shows that it can proceed in both directions under appropriate conditions.

You can learn more about acetic acid at: brainly.com/question/15202177

#SPJ11

The balanced chemical equation for the standard formation reaction of liquid acetic acid is:

CH3 (g) + CO2 (g) + H2 (g) → CH3COOH (l) with ΔfH° = -484.5 kJ/mol.

The standard formation reaction is the chemical reaction which takes place in order to form 1 mole of a substance from its constituent elements, with all reactants and products in their standard states at 25°C (298K) and 1 atm pressure. For the liquid acetic acid, the standard formation reaction equation is:

CH3COOH (l)   →  C2H4O2 (l)

ΔfH° = -484.5 kJ/mol

where,CH3COOH = liquid acetic acid

C2H4O2 = chemical formula of acetic acid

The standard formation reaction is an important method of calculating the standard enthalpy of formation, ΔHf°. This is the change in enthalpy when 1 mole of the substance is formed from its elements in their standard states. The formation of liquid acetic acid from its elements has a negative enthalpy change, indicating that it is an exothermic process. The chemical equation is balanced, with 1 mole of CH3COOH liquid being formed from 1 mole of its constituent elements. The number of atoms on both sides of the reaction equation are equal, and the overall charge is zero. Therefore, the balanced chemical equation for the standard formation reaction of liquid acetic acid is:

CH3 (g) + CO2 (g) + H2 (g) → CH3COOH (l) with ΔfH° = -484.5 kJ/mol.

To know more about liquid acetic acid visit:

https://brainly.com/question/15202177

#SPJ11

what mass (in grams) of mg(no3)2 is present in 184 ml of a 0.350 m solution of mg(no3)2

Answers

The mass (in grams) of Mg(NO3)2 present in 184 ml of a 0.350 M solution of Mg(NO3)2 is 33.3 g.

Given, Volume of the solution (V) = 184 mL = 0.184 L Concentration of the solution (M) = 0.350 M Molar mass of Mg(NO3)2 = 24.3050 + 2(14.0067 + 3 × 15.9994) = 148.3126 g/mol We can use the following formula to calculate the mass of Mg(NO3)2 present in the solution.

Molarity (M) = moles of solute / liters of solution=> Moles of solute (n) = Molarity × liters of solution n(Mg(NO3)2) = Molarity × Volume of the solution (L)n(Mg(NO3)2) = 0.350 × 0.184n(Mg(NO3)2) = 0.0644 moles Mass of Mg(NO3)2 = moles of Mg(NO3)2 × Molar mass of Mg(NO3)2= 0.0644 moles × 148.3126 g/mol= 9.5661 g Mass of Mg(NO3)2 in grams present in 184 ml of a 0.350 M solution of Mg(NO3)2 is 9.5661 g.

To know more about solution visit:

https://brainly.com/question/15757469

#SPJ11

which of the following is not a product of volcanic outgassing? group of answer choices
A. oxygen (o2)
B. nitrogen (n2)
C. water (h2o)
D. carbon dioxide (co2)

Answers

Nitrogen (N2) is not a product of volcanic outgassing. The correct answer is in option(b).

Volcanic outgassing refers to the process by which gases are released from a volcano into the atmosphere. Volcanic outgassing includes gases like sulfur dioxide (SO2), water vapor (H2O), carbon dioxide (CO2), hydrogen sulfide (H2S), and many others. But one gas that is not a product of volcanic outgassing is nitrogen (N2). Nitrogen is a major component of the Earth's atmosphere and makes up about 78% of it.

Nitrogen gas is a non-reactive element that is not easily released during volcanic eruptions. As a result, it is not a product of volcanic outgassing. All the other options are products of volcanic outgassing: Oxygen (O2), water (H2O), and carbon dioxide (CO2). Volcanic outgassing is a natural process that contributes to the composition of the Earth's atmosphere, which is essential for the survival of living organisms on Earth.

To know more about volcanic outgassing refer to:

https://brainly.com/question/9966675

#SPJ11

draw a lewis structure for the following. include all lone pair electrons in your structure. sif4 secl2 cof2 (c is central)

Answers

Lewis structures are structural formulas that provide a visual representation of covalent bonding between atoms in a molecule. The most probable Lewis structure of SIF4, SeCl2, and COF2 is given below:

SIF4 Lewis structureThe total valence electrons of sulfur and fluorine are 32 (6 + 4 × 7 = 34).To obtain the SIF4 Lewis structure, we follow the below steps: Step 1: Count the valence electrons of the atoms present in the molecule. Step 2: Determine which atom will be the central atom. Step 3: Form single bonds between the central atom and other surrounding atoms. Step 4: Place the leftover valence electrons on the outer atoms. Step 5: If the central atom does not achieve an octet, transfer lone pairs from an outer atom to the central atom until it achieves an octet. The most probable Lewis structure of SIF4 is shown below.

SeCl2 Lewis structureThe total valence electrons of selenium and chlorine are 24 (6 + 2 × 7 = 20).To obtain the SeCl2 Lewis structure, we follow the below steps: Step 1: Count the valence electrons of the atoms present in the molecule. Step 2: Determine which atom will be the central atom. Step 3: Form single bonds between the central atom and other surrounding atoms. Step 4: Place the leftover valence electrons on the outer atoms. Step 5: If the central atom does not achieve an octet, transfer lone pairs from an outer atom to the central atom until it achieves an octet.The most probable Lewis structure of SeCl2 is shown below. COF2 Lewis structure.The total valence electrons of carbon and fluorine are 24 (4 + 2 × 7 = 18).

To know more about covalent bonding visit:-

https://brainly.com/question/19382448

#SPJ11

For the following pair of compounds, identify whether the compounds are constitutional isomers or different representations of the same compound: w same compound O constitutional isomers

Answers

The pair of compounds are different representations of the same compound. Constitutions isomers are two or more molecules that have the same molecular formula but differ in their connections between atoms.

C2H6O can represent two constitutional isomers, which are ethanol and dimethyl ether. The molecular formula of the pair of compounds provided isn't given, but since the question only requires the identification of whether they are constitutional isomers or different representations of the same compound, it can be said that they are different representations of the same compound.

Constitutional isomers are isomers that have the same molecular formula, but different atomic connectivity or sequence of bonds in the molecule. Constitutional isomers are also known as structural isomers. The two compounds in the pair share the same atomic connectivity or sequence of bonds in the molecule, as such, they are different representations of the same compound.

To know more about compounds visit:

https://brainly.com/question/14117795

#SPJ11

When liquid water is introduced into an evacuated vessel at 25°C, some of the water vaporizes. Predict how the enthalpy, entropy, free energy, and temperature change in the system during this process. Explain the basis for each of your predictions

Answers

There is no change in the temperature of the system.

When liquid water is introduced into an evacuated vessel at 25°C, some of the water vaporizes.

Enthalpy change: The enthalpy of vaporization will be positive because the liquid water absorbs heat to overcome the intermolecular forces between the molecules during the vaporization process. The enthalpy change is ΔHvap > 0.

Entropy change: Entropy always increases in the system when a liquid is vaporized. This is because the disorder of the vapor is greater than the disorder of the liquid. The entropy change is ΔSvap > 0.

Free energy change: Free energy (Gibbs energy) is negative when a substance changes from a more ordered to a more disordered state. As the entropy change is positive and the enthalpy change is positive, we cannot predict the sign of the free energy change. The free energy change is ΔGvap = ΔHvap - TΔSvap.

Temperature change: The temperature remains constant at the boiling point (100 °C for water at standard pressure). The vaporization occurs only if enough heat is supplied to the water, which results in an increase in the internal energy of the system. But since the vessel is evacuated, the pressure inside the vessel will remain constant. Therefore, there is no change in the temperature of the system. The temperature change is ΔT = 0.

To know more about Gibbs Energy visit:

https://brainly.com/question/13795204

#SPJ11

5. list two other properties of the will that can be tested to investigate the alleged document forgery

Answers

Two other properties of the will that can be tested to investigate the alleged document forgery are the ink composition and the paper age.

1. Ink Composition: Forensic analysis can examine the ink used to write the will and compare it to the expected ink characteristics for the alleged time period when the document was created. Different ink formulations and chemical compositions are used in different time periods, and an inconsistency in the ink composition may indicate tampering or forgery.

2. Paper Age: Determining the age of the paper on which the will is written can also provide valuable insights. Paper can be analyzed using techniques such as carbon dating or examination of watermarks, manufacturing methods, and materials. If the determined age of the paper does not align with the alleged date of the will, it raises suspicions of forgery or document alteration.

By examining the ink composition and paper age, forensic experts can gather scientific evidence to support or refute the authenticity of the will. These additional properties add another layer of scrutiny and can provide critical information in investigating alleged document forgery.

learn more about Forgery here:

https://brainly.com/question/12232438

#SPJ11

Arrange the following molecules in order of increasing average molecular speed. H2 at 371K, NO2 at 339K, Ne at 371K, H2 at 425K Enter formulas and temperatures in the boxes below: 1 = slowest, 4 = fastest 1 at K 2 at K 3 at K 4 at K ???

Answers

The order of the molecular speed is;

NO2 at 339K < Ne at 371K, <  H2 at 371K < H2 at 425K

Does temperature affect molecular speed?

The speed of molecules is influenced by temperature. The average kinetic energy and speed of gas molecules are exactly proportional to the temperature of the gas, says the kinetic theory of gases.

The molecules' kinetic energy rises as the temperature rises. The molecules' average speed rises as a result of this increase in kinetic energy. On the other hand, as the temperature drops, so do the molecules' average speed and kinetic energy.

Learn more about molecular speed:https://brainly.com/question/15907052

#SPJ4

The mass of sodium chloride that would be produced when 2.3 g of sodium reacts with 0.56 L of chlorine gas at 290K and 1.2 atm. Assume 100% yield.

Answers

The balanced equation for the reaction between sodium and chlorine is given as follows:2 Na + Cl2 → 2 NaClTo find the mass of sodium chloride produced, we need to first calculate the limiting reactant.

The limiting reactant is the reactant that is completely consumed in a reaction. The other reactant is present in excess and is not completely consumed. The limiting reactant can be determined by comparing the mole ratio of the reactants to the actual mole ratio of the reactants given in the problem. Let's start the solution:Calculate the moles of sodium (Na) using the given mass:mass of Na = 2.3 gMolar mass of Na = 23 g/molNumber of moles of Na = (2.3 g) / (23 g/mol) = 0.1 molCalculate the moles of chlorine (Cl2) using the given volume, temperature, and pressure. We can use the ideal gas law, PV = nRT, to calculate the number of moles of gas.PV = nRTn = PV / RTn = [(1.2 atm) (0.56 L)] / [(0.0821 L atm mol^-1 K^-1) (290 K)]n = 0.023 molWe can see that the mole ratio of Na to Cl2 is 2:1. That means 2 moles of Na react with 1 mole of Cl2. Therefore, we need 0.05 mol of Cl2 to react with all of the Na.

We only have 0.023 mol of Cl2, which is less than what we need. That means Cl2 is the limiting reactant and Na is in excess. The amount of NaCl produced is limited by the amount of Cl2. We can calculate the mass of NaCl produced using the number of moles of Cl2 that reacted: mol of NaCl produced = 0.023 mol (from Cl2)Since 2 moles of NaCl are produced for every 1 mole of Cl2 that reacts, we can calculate the number of moles of NaCl produced: mol of NaCl produced = (2/1) × (0.023 mol) = 0.046 mol Finally, we can calculate the mass of NaCl produced using the molar mass of NaCl: mass of NaCl produced = (0.046 mol) × (58.44 g/mol) = 2.69 g Therefore, the mass of sodium chloride produced when 2.3 g of sodium reacts with 0.56 L of chlorine gas at 290K and 1.2 atm, assuming 100% yield, is 2.69 g.

To know more about reactant refer to:

https://brainly.com/question/26283409

#SPJ11

draw the product formed when the following starting material is treated with lda in thf solution at −78°c.

Answers

The product formed when the given starting material is treated with LDA (lithium diisopropylamide) in THF (tetrahydrofuran) solution at -78°C is the deprotonated form of the starting material, known as an enolate.

LDA is a strong base commonly used to deprotonate acidic hydrogens. In this case, when the starting material is treated with LDA in THF solution at a low temperature of -78°C, the LDA abstracts a hydrogen atom from the molecule. The most acidic hydrogen in this case is typically the alpha hydrogen (adjacent to the carbonyl group) of a ketone or aldehyde.

The reaction proceeds as follows:

[tex]\[\text{Starting material} \xrightarrow[\text{LDA, THF (-78°C)}]{\text{Deprotonation}} \text{Enolate}\][/tex]

The enolate is formed by the removal of the alpha hydrogen, resulting in the creation of a negatively charged carbon atom, which then reacts with the surrounding solvent or other electrophiles present in the reaction mixture. The enolate can undergo various reactions, such as nucleophilic addition or substitution, depending on the specific conditions and reagents present.

It's important to note that without further information about the specific starting material, a more detailed and specific product cannot be determined. The identity and structure of the starting material would greatly influence the outcome of the reaction and the subsequent reactions that could occur.

To learn more about LDA refer:

https://brainly.com/question/13327577

#SPJ11

The reaction of an aldehyde or a ketone with PhMgBr followed by acidic workup is an example of a/an Fisher Esterification Grignard Reaction Dieckmann Condensation Friedel-Crafts Alkylation Aldol Condensation

Answers

The intermediate can either be treated with acid to yield the alcohol or quenched with water to yield the corresponding hydrocarbon. It is one of the most common methods for the formation of C-C bonds between organic compounds.

The Fisher Esterification is a reaction in which an alcohol and a carboxylic acid are converted into an ester using an acid catalyst. The Dieckmann Condensation is a reaction in which a diester is converted into a cyclic β-ketoester through intramolecular condensation.

The Friedel-Crafts Alkylation is a reaction in which an alkyl or acyl group is added to an aromatic ring. The Aldol Condensation is a reaction in which an enolizable aldehyde or ketone reacts with itself or another carbonyl group-containing compound to form a β-hydroxyaldehyde or ketone.

To know more about hydrocarbon visit:

https://brainly.com/question/32019496

#SPJ11

starting with the following equation, fe₂o₃(s) al(s) → fe(l) al₂o₃(s) calculate the moles of fe₂o₃ that will be required to produce 975 grams of fe.

Answers

The number of mole of Fe₂O₃ that will be required to produce 975 grams of Fe in the given reaction is 8.73 moles

How do i determine the mole of Fe₂O₃ required?

First, we shall determine the mole present in 975 grams of Fe. Details below:

Mass of Fe = 975 grams Molar mass of Fe = 55.845  g/mol Mole of Fe =?

Mole = mass / molar mass

Mole of Fe = 975 / 55.845  

= 17.46 moles

Finally, we shall determine the number of mole of Fe₂O₃ required. This is shown below:

2Fe₂O₃ + 2Al -> 4Fe + 2Al₂O₃

From the balanced equation above,

4 moles of Fe were obtained from 2 moles of Fe₂O₃

Therefore,

17.46 moles of Fe will be obtained from = (17.46 × 2) / 4 = 8.73 moles of Fe₂O₃

Thus, the number of mole of Fe₂O₃ required is 8.73 moles

Learn more about number of mole needed:

https://brainly.com/question/23123935

#SPJ4

What mass of precipitate (in g) is formed when 85.6 mL of 0.500 M FeCl₃ reacts with excess AgNO₃ in the following chemical reaction? FeCl₃(aq) + 3 AgNO₃(aq) → 3 AgCl(s) + Fe(NO₃)₃(aq)

Answers

When 85.6 mL of 0.500 M [tex]FeCl_3[/tex] reacts with excess [tex]AgNO_3[/tex] according to the given chemical reaction, a mass of precipitate (AgCl) is formed.

The balanced chemical equation shows that one mole of [tex]FeCl_3[/tex] reacts with three moles of [tex]AgNO_3[/tex] to produce three moles of AgCl and one mole of [tex]Fe(NO_3)_3[/tex]. To determine the mass of the AgCl precipitate formed, we need to convert the volume of [tex]FeCl_3[/tex] the solution to moles using its molarity.

First, we calculate the moles of[tex]FeCl_3[/tex]:

Moles of [tex]FeCl_3[/tex] = volume (L) × molarity (mol/L)

= 0.0856 L × 0.500 mol/L

= 0.0428 mol

Since the stoichiometric ratio between [tex]FeCl_3[/tex] and AgCl is 1:3, the moles of AgCl formed will be three times the moles of [tex]FeCl_3[/tex]:

Moles of AgCl = 3 × moles of [tex]FeCl_3[/tex]

= 3 × 0.0428 mol

= 0.1284 mol

To determine the mass of AgCl precipitate, we need to multiply the moles of AgCl by its molar mass:

Mass of AgCl = moles of AgCl × molar mass of AgCl

= 0.1284 mol × 143.32 g/mol

= 18.41 g

Therefore, approximately 18.41 grams of AgCl precipitate will be formed in this reaction.

Learn more about stoichiometric ratios here:

https://brainly.com/question/6907332

#SPJ11

Some cleansers may contain bromate salts as oxidizing agents. These salts will react with iodide ion under the conditions we are using according to the reaction

BrO3- + 6H+ + 6I- -> 3I2 + Br- + 3H2O
What percentage by weight of KBrO3 would a cleanser have to contain in order to produce an amount of iodine equivalent to that produced by an equal weight of cleanser containing 0.50% NaOCl by weight?

Answers

We know that the mass of cleanser required to produce an amount of iodine equivalent to that produced by an equal weight of cleanser containing 0.50% NaOCl by weight is 100 g.Percent weight of KBrO3 = 0.18704 g / 100 g × 100%= 0.18704%Therefore, a cleanser would have to contain 0.18704% by weight of KBrO3 in order to produce an amount of iodine equivalent to that produced by an equal weight of cleanser containing 0.50% NaOCl by weight.

To calculate what percentage by weight of KBrO3 would a cleanser have to contain in order to produce an amount of iodine equivalent to that produced by an equal weight of cleanser containing 0.50% NaOCl by weight, we can use the following steps:Step 1: Determine the molecular weight of NaOCl and KBrO3

.NaOCl = 74.44 g/mol KBrO3 = 167.00 g/mol

Step 2: Calculate the number of moles of NaOCl in 100 g of the cleanser containing 0.50% NaOCl by weight.Mass of NaOCl in 100 g of cleanser = 0.50 gNumber of moles of NaOCl = Mass of NaOCl / Molecular weight of NaOCl= 0.50 g / 74.44 g/mol= 0.0067 molStep 3: Calculate the number of moles of iodine produced by 0.0067 mol of NaOCl according to the following balanced chemical equation:

NaOCl + 2HI → NaI + H2O + I2

The stoichiometry of the balanced chemical equation shows that 1 mol of NaOCl reacts with 2 mol of HI to produce 1 mol of I2.Number of moles of I2 produced

= 0.0067 mol NaOCl × (1 mol I2 / 2 mol NaOCl) = 0.00335 mol I2

Step 4: Calculate the number of moles of KBrO3 required to produce 0.00335 mol of I2 according to the balanced chemical equation.

BrO3- + 6H+ + 6I- → 3I2 + Br- + 3H2O

Molar ratio of KBrO3 to I2 in the balanced chemical equation is 1:3.Number of moles of KBrO3 required =

0.00335 mol I2 × (1 mol KBrO3 / 3 mol I2) = 0.00112 mol KBrO3

Step 5: Calculate the mass of KBrO3 required to produce 0.00112 mol of KBrO3.Mass of KBrO3 required = Number of moles of KBrO3 × Molecular weight of

KBrO3= 0.00112 mol × 167.00 g/mol= 0.18704 g

Step 6: Calculate the percentage by weight of KBrO3 in the cleanser.Percent weight of KBrO3 = Mass of KBrO3 / Mass of cleanser × 100%We know that the mass of cleanser required to produce an amount of iodine equivalent to that produced by an equal weight of cleanser containing 0.50% NaOCl by weight is 100 g.Percent weight of

KBrO3 = 0.18704 g / 100 g × 100%= 0.18704%

Therefore, a cleanser would have to contain 0.18704% by weight of KBrO3 in order to produce an amount of iodine equivalent to that produced by an equal weight of cleanser containing 0.50% NaOCl by weight.

To know more about iodine visit:

https://brainly.com/question/30957837

#SPJ11

Determine whether each compound is soluble or insoluble in water. Consult the solubility table to answer the question. 1. NiP4 2. KBr
3. KNO3
4. ALCOH)2
5. AgBr

Answers

1. NiP₄is insoluble in water.

2. KBr is soluble in water.

3. KNO₃ is soluble in water.

4. Al(C₂H₅OH)₃ is insoluble in water.

5. AgBr is insoluble in water.

To determine the solubility of compounds in water, we can consult a solubility table. Here are the solubility classifications for the compounds mentioned:

1. NiP₄: According to the solubility table, phosphates (P⁴⁻) are generally insoluble except for alkali metal and ammonium phosphates. Therefore, NiP₄ is most likely insoluble in water.

2. KBr: Bromides (Br⁻) are generally soluble in water, including potassium bromide (KBr). Therefore, KBr is soluble in water.

3. KNO₃: Nitrates (NO₃⁻) are generally soluble in water, including potassium nitrate (KNO₃). Therefore, KNO₃ is soluble in water.

4. Al(C₂H₅OH)₃: This compound represents aluminum ethoxide, which is derived from the reaction of aluminum with ethanol. Ethoxides are generally insoluble in water. Therefore, Al(C₂H₅OH)₃ is most likely insoluble in water.

5. AgBr: According to the solubility table, bromides (Br⁻) are generally soluble in water except for those of silver, lead, and mercury(I). Therefore, AgBr (silver bromide) is insoluble in water.

Learn more about solubility at https://brainly.com/question/9098308

#SPJ11

what+is+the+mole+fraction+of+urea,+ch4n2o+(mm+60+g/mol),+in+an+aqueous+solution+that+is+21%+urea+by+mass?

Answers

The mole fraction of urea (CH4N2O) in an aqueous solution that is 21% urea by mass is 0.119. Given information Mass percentage of urea in the solution = 21%Mass of the solvent = 100 g Molecular mass of urea (CH4N2O) = 60 g/mol.

Now, let's calculate the mass of urea present in 100 g of the solution. Mass of urea = 21% of 100 g= (21/100) × 100 g= 21 gNow, calculate the number of moles of urea present in the solution. Number of moles of urea = mass of urea / molecular mass= 21 g / 60 g/mol= 0.35 mol. Now, calculate the total number of moles of the solution.

Total number of moles = mass of solution / molar mass of solution= 100 g / (18 g/mol)= 5.56 mol. The mole fraction of urea is the ratio of moles of urea to total moles of the solution. Mole fraction of urea = Number of moles of urea / Total number of moles of the solution= 0.35 mol / 5.56 mol= 0.119 Therefore, the mole fraction of urea (CH4N2O) in an aqueous solution that is 21% urea by mass is 0.119.

To know more about Mass visit:

https://brainly.com/question/11954533

#SPJ11

what is the ka of a weak acid (ha) if equilibrium concentrations are [h3o ] = [a-] = 1.6 x 10-4 m , [ha] = 0.25 m group of answer choices

Answers

The given equilibrium concentrations are [H3O+] = [A-] = 1.6 × 10-4 M, [HA] = 0.25 M. We are required to calculate the Ka of the weak acid (HA).

A weak acid is an acid that partially dissociates in water. In other words, only some of the acid molecules react with water to produce hydrogen ions (H+). The formula for Ka is:Ka = [H+][A-] / [HA]Where[H+] = hydrogen ion concentration[A-] = concentration of the conjugate base[HA] = concentration of the weak acid.

Substitute the given values in the formula:Ka = [H+][A-] / [HA]Ka = (1.6 × 10-4 M)2 / (0.25 M)Ka = 1.024 × 10-6M. A weak acid is an acid that partially dissociates in water. In other words, only some of the acid molecules react with water to produce hydrogen ions (H+). The formula for Ka is:Ka = [H+][A-] / [HA]Where[H+] = hydrogen ion concentration[A-] = concentration of the conjugate base[HA] = concentration of the weak acid.

To know more about equilibrium visit :

https://brainly.com/question/30694482

#SPJ11

what isthe thod of the following chemicals?show the balanced stoichiometric equation with yourwork: (a) 5 mg/l c7h3; (b)0.5 mg/l c6cl5oh; (c)c12h10.

Answers

The method of degradation of the given chemicals are stated 5 mg/l C7H3 the process of photolysis by which C7H3 can be degraded  to this is that C7H3 undergoes photodegradation process

Under the influence of solar light and ultraviolet rays. Here is the balanced stoichiometric equation with the work:2 C7H3 + 3 O2 → 14 CO2 + 3 H2Ob) 0.5 mg/l C6Cl5OHSimilarly, the main answer to this is the process of photolysis by which C6Cl5OH can be degraded. The long answer to this is that C6Cl5OH undergoes photodegradation process under the influence of solar light and ultraviolet rays. Here is the balanced stoichiometric equation with the work:2 C6Cl5OH + 9 O2 → 12 CO2 + 5 H2O + 3 Cl2c) C12H10 to this question is the process of biodegradation by which C12H10 can be degraded. The long answer to this is that C12H10 undergoes biodegradation process by the microorganisms present in the soil.

Here is the balanced stoichiometric equation with the work:C12H10 + 32 O2 → 12 CO2 + 5 H2OExplanation:Given,5 mg/l of C7H3,0.5 mg/l of C6Cl5OH and C12H10. The methods of degradation for C7H3 and C6Cl5OH are photolysis under the influence of solar light and ultraviolet rays. For C12H10, the method of degradation is biodegradation under the influence of microorganisms. The balanced stoichiometric equations for the degradation of the given chemicals are stated below:2 C7H3 + 3 O2 → 14 CO2 + 3 H2O (Photolysis of C7H3)2 C6Cl5OH + 9 O2 → 12 CO2 + 5 H2O + 3 Cl2 (Photolysis of C6Cl5OH)C12H10 + 32 O2 → 12 CO2 + 5 H2O (Biodegradation of C12H10)

To know more about chemicals Visit;

https://brainly.com/question/23693316

#SPJ11

how many grams of mg would be required to produce 100.00 ml of h2 at a pressure of 1.034 atm and a temperature of 21.01 c?

Answers

The stoichiometry shows that 1 mole of Mg produces 1 mole of H2. Therefore, the number of grams of Mg required is equal to the number of moles of H2. You can multiply the moles of H2 by the molar mass of Mg to get the grams of Mg required.

To calculate the number of grams of Mg required to produce 100.00 mL of H2, we need to use the ideal gas law equation: PV = nRT.
First, we need to convert the temperature to Kelvin by adding 273.15:
T = 21.01°C + 273.15 = 294.16 K
Next, we need to convert the volume from mL to liters:
V = 100.00 mL = 0.100 L
Given that the pressure is 1.034 atm and the temperature is 294.16 K, we can rearrange the ideal gas law equation to solve for moles (n):
n = PV / RT
Substituting the values into the equation, we have:
n = (1.034 atm * 0.100 L) / (0.0821 L·atm/mol·K * 294.16 K)
Solving for n will give us the moles of H2. Since the reaction is:
Mg + 2HCl → MgCl2 + H2
The stoichiometry shows that 1 mole of Mg produces 1 mole of H2. Therefore, the number of grams of Mg required is equal to the number of moles of H2. You can multiply the moles of H2 by the molar mass of Mg to get the grams of Mg required.

To know more about gas law, click here https://brainly.com/question/30458409

#SPJ11

what is the coefficient for h in the balanced version of the following redox reaction? zn no−3→zn2 nh 4

Answers

The balanced version of the given redox reaction is: Zn + 2NO3- + 8H+ → Zn2+ + 2NO + 4H2OIn the above-given balanced redox reaction, the coefficient of h is 8.

Redox reactions can be balanced by using the oxidation number method. In the given redox reaction, the oxidation number of nitrogen changes from +5 to +2. Therefore, it is undergoing reduction. On the other hand, the oxidation number of zinc changes from 0 to +2. Follow the steps given below to balance the given redox reaction using the oxidation number method.

Write down the given unbalanced redox reaction. Zn + NO3- → Zn2+ + NO Step 2: Write down the oxidation number of each atom in the given redox reaction. Zn + NO3- → Zn2+ + NO    0      +5        +2      +2Step 3: Balance the atoms of each element present in the redox reaction except for oxygen and hydrogen. The balanced equation is given below. Zn + 2NO3- → Zn2+ + 2NO3-Step 4: Add H2O to balance oxygen atoms. The balanced equation is given below. Zn + 2NO3- + 8H+ → Zn2+ + 2NO3 + 4H2OStep 5: Add electrons to balance the charges. The balanced equation is given below. Zn + 2NO3- + 8H+ → Zn2+ + 2NO3 + 4H2O + 2e-Step 6: Make the electrons equal in both half-reactions. The balanced equation is given below. Zn + 2NO3- + 8H+ → Zn2+ + 2NO3 + 4H2O + 2e-2H+ + 2e- → H2Step 7: Add half-reactions to form a complete redox reaction.

To know more about redox reaction visit:

https://brainly.com/question/28300253

#SPJ11

at a certain temperature, 0.367 mol ch4 and 0.603 mol h2o is placed in a 1.50 l container. ch4(g) 2h2o(g)↽−−⇀co2(g) 4h2(g) at equilibrium, 6.95 g co2 is present. calculate c .

Answers

Using the stoichiometry of the reaction, we find that the concentration (C) is approximately 0.158 M.

According to the balanced equation, the molar ratio between CH4 and CO2 is 1:1. Therefore, the number of moles of CO2 formed will be equal to the number of moles of CH4 present initially, which is 0.367 mol.

To convert the moles of CO2 to grams, we need to use the molar mass of CO2, which is approximately 44.01 g/mol. Thus, the mass of CO2 present at equilibrium is:

Mass of CO2 = moles of CO2 × molar mass of CO2

Mass of CO2 = 0.367 mol × 44.01 g/mol

Mass of CO2 = 16.135 g

Given that the mass of CO2 at equilibrium is 6.95 g, we can set up the following proportion to find the concentration (C):

6.95 g CO2 / 16.135 g CO2 = C / 0.367 mol

Solving for C, we find:

C = (6.95 g CO2 / 16.135 g CO2) × 0.367 mol

C ≈ 0.158 M

Therefore, the concentration (C) is approximately 0.158 M.

To know more about stoichiometry, refer to the link :

https://brainly.com/question/28780091#

#SPJ11

What is the empirical formula of a compound containing 83% potassium and 17% oxygen?

Answers

The empirical formula of the compound containing 83% potassium and 17% oxygen is K₂O.

What is the empirical formula of the compound with 83% potassium and 17% oxygen?

The empirical formula represents the simplest whole-number ratio of atoms present in a compound. To determine the empirical formula, we need to convert the given percentages of potassium and oxygen into mole ratios.

Assuming we have 100 grams of the compound, we would have 83 grams of potassium and 17 grams of oxygen. To find the moles of each element, we divide the mass by their respective molar masses. The molar mass of potassium (K) is 39.10 g/mol, and the molar mass of oxygen (O) is 16.00 g/mol.

Converting the masses to moles, we find that we have approximately 2.12 moles of potassium and 1.06 moles of oxygen. To obtain the empirical formula, we divide the moles by the smallest number of moles, which is 1.06. This gives us a ratio of approximately 2:1.

Therefore, the empirical formula of the compound is K₂O, indicating that it contains two potassium atoms for every oxygen atom.

Learn more about empirical formula

brainly.com/question/32125056

#SPJ11

What is the concentration of Al3+ when 25 grams of Al(OH)3 is added to 2.50 L of solution that originally has [OH‒] = 1 × 10‒3? Ksp(Al(OH)3) = 1.3 × 10‒33
a) The concentration of Al3+ cannot be determined with the given information.
b) 1.3 × 10‒33 M
c) 2.5 × 10‒11 M
d) 6.25 × 10‒10 M

Answers

The correct answer is a) The concentration of Al3+ cannot be determined with the given information.

To determine the concentration of Al3+ when 25 grams of Al(OH)3 is added to a solution with [OH‒] = 1 × 10‒3 M, we need to consider the solubility equilibrium of Al(OH)3.

The solubility product constant, Ksp, for Al(OH)3 is given as 1.3 × 10‒33. The balanced equation for the dissociation of Al(OH)3 is:

Al(OH)3 ⇌ Al3+ + 3OH‒

From the equation, we can see that one mole of Al(OH)3 dissociates to yield one mole of Al3+ and three moles of OH‒.

First, we need to calculate the moles of Al(OH)3 from the given mass and its molar mass. The molar mass of Al(OH)3 is calculated as follows:

(1 x atomic mass of aluminum) + (3 x atomic mass of oxygen) + (3 x atomic mass of hydrogen)

(1 x 26.98 g/mol) + (3 x 16.00 g/mol) + (3 x 1.01 g/mol) = 78.00 g/mol

Calculate the moles of Al(OH)3:

moles of Al(OH)3 = mass of Al(OH)3 / molar mass of Al(OH)3

moles of Al(OH)3 = 25 g / 78.00 g/mol ≈ 0.320 mol

Next, we need to calculate the concentration of OH‒ ions in the solution.

Calculate the concentration of OH‒ ions:

[OH‒] = 1 × 10‒3 M (given)

Since Al(OH)3 dissociates to yield three moles of OH‒ for every mole of Al(OH)3, the concentration of OH‒ ions is tripled:

[OH‒] = 3 × 1 × 10‒3 M = 3 × 10‒3 M

Now, we can assume that the concentration of Al3+ is x M. At equilibrium, the concentration of OH‒ ions is reduced by x M due to the dissociation of Al(OH)3:

[OH‒] = 3 × 10‒3 M - x

The solubility product expression for Al(OH)3 is:

Ksp = [Al3+][OH‒]^3

Substituting the values into the Ksp expression:

1.3 × 10‒33 = x(3 × 10‒3 - x)^3

Since x is much smaller than 3 × 10‒3, we can approximate (3 × 10‒3 - x)^3 as (3 × 10‒3)^3.

1.3 × 10‒33 ≈ x(3 × 10‒3)^3

1.3 × 10‒33 ≈ 27x × 10‒9

Dividing both sides by 27 × 10‒9:

x ≈ (1.3 × 10‒33) / (27 × 10‒9) ≈ 4.81 × 10‒26 M

Therefore, the concentration of Al3+ is approximately 4.81 × 10‒26 M. Option A

For more such questions on concentration visit:

https://brainly.com/question/28564792

#SPJ8

rank the following oil spills from highest to lowest in terms of oil tonnage spilled.

Answers

Answer:

don't worry I'm here

Here is a ranking of the following oil spills from highest to lowest in terms of oil tonnage spilled:

Deep water Horizon oil spill (2010): The Deep water Horizon oil spill in the Gulf of Mexico is considered one of the largest and most devastating oil spills in history. It resulted in an estimated 4.9 million barrels (approximately 210 million gallons or 780,000 metric tons) of oil being released into the ocean.

Ixtoc I oil spill (1979): The Ixtoc I oil spill occurred in the Bay of Campeche in the Gulf of Mexico. It released an estimated 3.3 million barrels (approximately 140 million gallons or 525,000 metric tons) of oil into the marine environment.

Atlantic Empress oil spill (1979): The Atlantic Empress, an oil tanker, collided with another tanker, Aegean Captain, off the coast of Trinidad and Tobago. This accident resulted in the release of an estimated 2.1 million barrels (approximately 90 million gallons or 337,000 metric tons) of oil into the Caribbean Sea.

ABT Summer oil spill (1991): The ABT Summer, an oil tanker, experienced an explosion and sank off the coast of Angola. It spilled an estimated 1.8 million barrels (approximately 75 million gallons or 280,000 metric tons) of oil into the Atlantic Ocean.

Nowruz oil field spill (1983): The Nowruz oil field spill occurred during the Iran-Iraq War. It resulted in the deliberate release of an estimated 1.5 million barrels (approximately 63 million gallons or 236,000 metric tons) of oil into the Persian Gulf.

Please note that the figures provided are approximate estimates, and the actual quantities spilled may vary depending on different sources and ongoing assessment

phosphomolybdic acid fumes uncontrollably when exposed to air.

Answers

Phosphomolybdic acid (PMA) is a white, crystalline, odorless, water-soluble compound that fumes uncontrollably when exposed to air.

PMA is a strong oxidizing agent that is used as a chemical reagent in the laboratory. It is used as an indicator for metals, including lead, copper, and cadmium. PMA is used in qualitative analysis to distinguish among amino acids and peptides.Phosphomolybdic acid is a white, crystalline powder that is used in organic chemistry and inorganic chemistry as a powerful oxidizing agent. It is a common reagent in the laboratory, and it is used to prepare organic compounds, including aldehydes, ketones, carboxylic acids, and esters.

The fumes released by phosphomolybdic acid when exposed to air are harmful and should be avoided. These fumes can cause respiratory problems and should not be inhaled.

To know more about acid visit:

https://brainly.com/question/29262915

#SPJ11

he circles below represent a phase change occurring at constant temperature: h5ani Is the value of each of the following positive (+), negative (−), zero (0), or impossible to determine from the given information? (a) qsys (b) ΔEsys (c) ΔEuniv + − 0 inconclusive + − 0 inconclusive + − 0 inconclusive

Answers

(a) qsys: impossible to determine

(b) ΔEsys: 0

(c) ΔEuniv: inconclusive

What is the determination of the changes in qsys, ΔEsys, and ΔEuniv during the phase change?

In the given information, the circles represent a phase change occurring at constant temperature. However, the information provided does not allow us to determine the value of qsys, which represents the heat transfer to or from the system. Without additional data, we cannot ascertain whether heat is being added or removed from the system.

Regarding ΔEsys, which represents the change in internal energy of the system, it is determined to be zero. This indicates that there is no change in the system's internal energy during the phase change occurring at constant temperature.

Lastly, the value of ΔEuniv, which represents the change in the total energy of the system and its surroundings, is inconclusive based on the given information. Without further details, it is not possible to determine whether the phase change results in a change in the total energy of the system and its surroundings.

Learn more about phase change

brainly.com/question/30270780

#SPJ11

solid state question
2. (pt 10) Indium antimonide has Eg = 0.23 eV, dielectric constant &= 18; electron effective mass m 0.015 m. Calculate (a) the donor ionization energy, (b) the radius of the ground state orbit (the ra

Answers

The donor ionization energy in indium antimonide is 0.063 eV and the radius of the ground state orbit is 6.0×10⁻⁶ cm.

The donor ionization energy is the energy required to remove an electron from a donor impurity atom in InSb. It is given by:

[tex]E_d = \frac{13.6 \text{ eV}}{m^*/m} \cdot \frac{1}{\epsilon^2}[/tex]

where m ∗is the effective mass of the electron and ϵ is the dielectric constant. For InSb, m ∗=0.015m and ϵ=18, so the donor ionization energy is:

[tex]E_d = \frac{13.6 \text{ eV}}{0.015 m/m} \cdot \frac{1}{18^2} = 0.063 \text{ eV}[/tex]

The radius of the ground state orbit is the radius of the Bohr orbit for the electron in the ground state. It is given by:

[tex]a_0 = \frac{\hbar^2}{m^* e^2} \cdot \frac{1}{\epsilon}[/tex]

where ℏ is the reduced Planck constant, m∗ is the effective mass of the electron, e is the elementary charge, and ϵ is the dielectric constant. For InSb, m ∗=0.015m and ϵ=18, so the radius of the ground state orbit is:

[tex]a_0 = \frac{\hbar^2}{0.015 m e^2} \cdot \frac{1}{18} = 6.0 \times 10^{-6} \text{ cm}[/tex]

To know more about the ionization energy refer here :

https://brainly.com/question/17222735#

#SPJ11

2. (pt 10) Indium antimonide has Eg = 0.23 eV, dielectric constant &= 18; electron effective mass m 0.015 m. Calculate (a) the donor ionization energy, (b) the radius of the ground state orbit (the radius of the impurity atom)?

how many electrons are transferred in the following redox reaction? zn + 2agno3⟶2ag + zn(no3)2

Answers

The following redox reaction is given below:

Zn + 2AgNO3 ⟶ 2Ag + Zn(NO3)2In the above redox reaction, the oxidation state of Zn changes from 0 to +2, while the oxidation state of Ag changes from +1 to 0.

Therefore, Zn loses 2 electrons and Ag gains 1 electron.2 moles of AgNO3 will consume 2 × 2 = 4 electrons, since each mole of AgNO3 consumes two electrons to reduce the two Ag+ ions.

The number of electrons transferred during the reaction is 2 × 1 = 2.

Thus, two electrons are transferred in the given redox reaction.

To know more about redox reaction visit:
https://brainly.com/question/28300253

#SPJ11

Other Questions
Which of the following is the best proxy for the expected return of the market? Multiple Choice O The Treasury Bill yield Last year's Dow Jones Industrials Average return Whatever Jim Cramer s predicting The 5-year trailing return of the S&P 500 Index Constant returns to scale are defined as long-run average total costs thata. remain the same as production capacity increases.b. decrease as a firm produces additional products. c. decrease as production capacity increases.d. increase as production capacity increases. Suppose the purchase price of a tractor is $250.000, its residual value in five years is certain to be $35,000 and there is no risk that the lessee will default on the lease Lease payments are made at the beginning of each payment period. Assume that capital markets are perfect and the risk-free interest rates 48% APR with monthly compounding. The monthly lease payments for a five-year $1.00 out a lease of the tractor are closest to O $5,150 Ob $4,550 O $5.500 06 $4100 A system, which detects plagiarism in student submissions, isvery reliable and gives 98% true positive results and 98% truenegative results. It is also known that 2% students use someoneelse's work Under the Code of Professional Conduct of the AICPA, which of the following is required to be independent in fact and appearance when discharging professional responsibilities?1) A CPA in public practice providing tax and management advisory services.2) A CPA not in public practice.3) All CPAs.4) A CPA in public practice providing auditing and other attestation services. HURRY PLEASEQ.26This excerpt is taken from a letter written by a father to his son."But then, on the other hand, I flatter myself, that as your own reason (though too young as yet to suggest much to you of itself) is, however, strong enough to enable you both to judge of and receive plain truths: I flatter myself, I say, that your own reason, young as it is, must tell you, that I can have no interest but yours in the advice I give you; and that, consequently, you will at least weigh and consider it well: in which case, some of it will, I hope, have its effect."The tone of this excerpt can best be described asA. scathing and unapologeticB. conciliatory and humbleC. sorrowful and regretfulD. hopeful and conversationalE. loving and melancholy You are a small business person who plans to open a premium coffee shop, much like Starbucks. Your value proposition is premium blend coffee from small farmers around the globe, a fun, informal environment for college students and others who might enjoy televisions, a funky atmosphere (paintings on the walls, workers wearing tee-shirts and shorts, cement floors, and used furniture for seating. Compose a discussion post that responds to each of the following prompts:1. Considering your unique brand position the market competition, and your goal of achieving brand awareness and premium image, how would you arrive at prices for your coffee? How important are the 4Cs (costs, competition, customers, company strategy) for this product?2. Consider the pricing objectives and strategies (attached) what are your objectives as a new shop and what is your pricing strategy (long term? Explain your rationale3. What is your price ter level relative to your competition Discuss your reasoning4. Assume the following factors the average variable cost for all coffee sold is 15 foxed costs $30 K/ month How much coffee do you need to sell at the prices you've set to breakeven (e. cover all fixed costs) for a month? express the function as the sum of a power series by first using partial fractions. f(x) = 8 x2 2x 15 Consider A Firm Who Created A Product And Applied For A Patent. This Patent Is Now About To Expire And It Is Expected Quite A Number Of Additional Firms Will Begin To Produce A Variation Of This Good. A. Describe In Detail What The Original (With Patent) And New (Without Patent) Market Structures Will Look Like. B. Explain Whether Its True, False Or Consider a firm who created a product and applied for a patent. This patent is now about to expire and it is expected quite a number of additional firms will begin to produce a variation of this good.a. Describe in detail what the original (with patent) and new (without patent) market structures will look like.b. Explain whether its true, false or uncertain that the increase in competition will lead to zero profits for the firms and a better outcome for the consumers and the market. one way firms have made the application process more efficient and effective is by: Solve for x in simplest form. What is the probability of picking exactly 1 red and 1 green ball without replacement from a bag that contains 5 red, 6 green, and 4 blue balls? 0.250 0.083 0.143 O 0.104 Feather Friends, Incorporated,distributes a high-quality wooden birdhouse that sells for $20 per unit.Variable expenses are $80 per unit,and fixed expenses total $160,000 per year. Its operationg results fpr ;ast year were as follows: Assume that you work for an airline unloading luggage from airplanes. Your boss has said that, on average, each airplane contains 100 pieces of luggage. Furthermore, your boss has stated that you should be able to unload 100 pieces of luggage from an airplane in 10 minutes. Today an airplane arrived with 150 pieces of luggage and you unloaded all of it in 13 minutes. After finishing with the 150 pieces of luggage, your boss yelled at you for exceeding the 10 minute allowance for unloading luggage from an airplane. Required: How would you feel about being yelled at for taking 13 minutes to unload 150 pieces of luggage? How does this scenario relate to the larger issue of how companies design control systems? Assume that you just completed a December weekend vacation to a casino within the United States. During your trip you won $10,000 gambling. When the casino exchanged your chips for cash they did not record any personal information, such as your driver's license number or social security number. Four months later while preparing your tax returns for the prior year, you stop to contemplate the fact that the Internal Revenue Service requires taxpayers to report all gambling winnings on Form 1040. Required: Would you report your gambling winnings to the Internal Revenue Service so that you could pay federal income taxes on those winnings? Do you believe that your actions are ethical? Why? What are Porter's three generic strategies? Briefly describe them.What are the limitations when it comes to a strategic alliance and a joint venture? In connection with your audit Jonli Company, you noted that the company has a long-standing policy of acquiring company equipment, by leasing.In 2021, the company entered a lease for a new machine. The lease stipulates those annual payments will be made for 5 years.The payments are to be made in advance on December 31 of each year. At the end of the 5-year period, Jonli may purchase the machine.The estimated economic life of the equipment is 12 years. Jonli uses the calendar year for reporting purposes and straight-line depreciation for other equipment. In addition, the following information about the lease is also available:Annual lease payments (including executory costs of P5,000): 60,000Purchase option price: 25,000Estimated fair value of machine after 5 years: 75,000Implicit rate: 10%Date of the first lease payment: Jan. 1, 2021Based on the foregoing and the results of your audit, compute for the following: (Round off present value factors to decimal places.)1. Cost of right-of-use assetA. 224,017B. 229,345C. 244,868D. 275,9132. Lease liability as of December 31, 2021A. 130,919B. 136,780C. 153,855D. 189,6863. Current portion of the lease liability at December 31, 2021A 36,013B. 39,614C. 41,322D. 41,9084. Interest expense for the year 2021A. 0B. 16,902C. 17.435D. 18,9875. Depreciation expense for the year 2021A. 18,668B. 19,112C. 20,406D. 48,974 digital marketing tools provide which type of support for a company or organization's marketing messages? Question 10 12 pts CWB Inc. budgeted $60000 for fixed manufacturing overhead. Its fixed manufacturing overhead rate based on practical capacity was $1.5 per unit. How many units of practical capacity did CWB have? The expected capacity variance computed before the period began had been 15000 U. What were CWB's budgeted production units? The unexpected capacity variance computed after the period had been over was 15000 F. What were CWB's actual production units? A firm sells two products. Product R sells for $20; its variable cost is $6. Product S sells for $50; its variable cost is $30. Product R accounts for 60 percent of the firm's sales. while S accounts for 40 percent. The firm's fixed costs are $4 million annually. Calculate the firm's break-even point. If a stock has a positive alpha:a. none of the choicesb. then the expected return exceeds the required return.c. then the expected return exceeds the Sharpe ratio.d. then the stock's beta exceeds the market beta.