what is the molarity of h3po4 solution if 0.05 M ba(oh)2 is needed to neutralize 20.00 ml of h3po4

Answers

Answer 1

The molarity of h3po4 solution if 0.05 M ba(oh)2 is needed to neutralize 20.00 ml of h3po4 is 0.25 M.

Given,

M₁ =?

valance factor H₃PO₄ (n)₁ = 3

M₂ = 0.05 M

V1 = V2 = 20 m or 0.02 L

valance factor Ba(OH)₂(n)₂ = 2

M₁n₁V₁ = M₂n₂V₂

M₁ = (M₂n₂V₂) / n₁V₁

     = 0.05 × 2 × 3

      = 0.25 M

Molarity is the number of moles of a substance in keeping with the liter of answer. solutions labeled with the molar awareness are denoted with a capital M; a 1. zero M answer incorporates 1 mole of solute according to the liter of answer. Molality is the variety of moles of solute in step with a kilogram of solvent.

Molarity (M) is the amount of a substance in a positive volume of solution. Molarity is described because the moles of a solute in step with liters of an answer. Molarity is also known as the molar attention of an answer.

Molarity is very crucial in chemistry for one big purpose. it's far the measurement of concentration in any mixture. The molarity of any solution is a way to know the unique factors or compounds which are found in any solution.

Learn more about molarity here:-https://brainly.com/question/11555274

#SPJ1


Related Questions

determine which reaction will occur.


1) 2Li(s) + Mg2+ = 2Li+ + Mg(s)


2) Fe(s) + Zn2+ = Fe2+ + Zn(s)

Answers

The first reaction 2Li(s) + Mg^2+(aq)---> 2Li^+(aq) + Mg(s) would occur because lithium is above magnesium in the electrochemical series.

Which reaction would occur?

We know that the possibility that one metal can be able to displace the other is only brought about by the position of the metals in the electrochemical series.

We know that the metals that are higher in the series are able to displace the metals that are lower in the series from an aqueous solution of the salts of the lower metal. In this case the lithium metal is above the magnesium metal so it can be able to displace it from solution.

Learn more about electrochemical series:https://brainly.com/question/14652325

#SPJ1

PLEASE HURRY ASAP
The image below shows a certain type of global wind:

The Earth is shown as a circle. Equator is shown and labeled at 0 degrees. 30 degrees north and south latitudes are shown and labeled. 60 degrees north and south latitudes are shown and labeled. Curved arrows are shown pointing from the top and bottom ends of the circle towards 60 degrees north and s
What best describes these winds?

Polar easterlies caused due to sinking, cool air above the poles
Polar easterlies caused due to rising, warm air above the poles
Trade winds caused due to sinking, cool air above the equator
Trade winds caused due to rising warm air above the equator

Answers

Answer:

Polar easterlies caused due to sinking, cool air above the poles

Explanation:

I hope this helps! If it does would you please mark me brainliest?

What is the molar mass of phosphorus trichloride (PCI3)

Answers

Answer:

137.33 g/mol

Explanation:

Molar mass of PCl3 = 137. 332761 g/mol

Convert grams Phosphorus Trichloride to moles or moles Phosphorus Trichloride to grams

Molecular weight calculation:

30.973761 + 35.453*3

The chemical reaction that you will model is shown below. Calcium oxide (CaO) is a white
solid with a crystalline structure. It is made by heating limestone, coral, seashells, or chalk,
which are composed mainly of calcium carbonate (CaCO3). During the heating process,
carbon dioxide (CO2) is released and calcium oxide (CaO) is produced. Commercially,
calcium oxide is called lime. One of the oldest uses of lime is to make mortar, a substance
used in construction to secure bricks, stones, and blocks together.
CaCO3 → CaO + CO2

Answers

Calcium carbonate is made by passing carbon dioxide through slaked lime or calcium oxide CaO. Mainly eggshells, sedimentary rocks and minerals, seashells etc. are composed of calcium carbonate, CaCO₃.

What is calcium carbonate?

Calcium carbonate is an inorganic compound made by passing carbon dioxide gas through slaked lime or calcium oxide. This reaction is an example of combination reaction.

Calcium carbonate can be easily decomposed into its constituents carbon dioxide and and calcium oxide. The decomposition of calcium carbonate is an exothermic reaction thus heat is evolved to the surrounding.

Rocks and minerals are mainly made of calcium deposits. Calcium carbonate is mainly found in minerals, sedimentary rocks, eggshells, seashell etc.

Therefore the materials which are composed of calcium carbonate are, minerals, eggshells, seashells etc.

To find more about CaCO₃ refer the link below:

https://brainly.com/question/28300580

#SPJ1


Would Krypton (Kr), normally be expected to react and form compounds?
A Yes, because Krypton has 7 valence electrons, and a high electronegativity.
B No, because Krypton has 8 valence electrons, and no electronegativity.
C No, because Krypton has 8 valence electrons, and no ionization energy.
D Yes, because Krypton has 7 valence electrons, and a high ionization energy.

Answers

B No, because Krypton has 8 valence electrons, and no electronegativity.

Other than fluorine gas, nothing else reacts with it. Commercially, krypton is used as the refueling gas for fluorescent lights. Some flash lights used in high-speed photography also make use of it.

Why does krypton not react?

This is due to the fact that Krypton's fourth energy level valence electrons are more thoroughly shielded by inner electrons than those of the lighter noble gases.

Krypton (Kr) is a chemical element that is a rare gas belonging to Periodic Table Group 18 (noble gases). It only forms a small number of chemical compounds. Krypton is monoatomic, colorless, odorless, and about three times heavier than air.

to learn more about Krypton (Kr) refer to:

https://brainly.com/question/1683513

#SPJ13

how does elemt's atomic mass differ from its mass number?

Answers

Answer:

Mass number is a whole number because it is the sum of number of proton and number of neutrons whereas atomic mass is fractional because it is the average relative mass of its atoms as compared with mass an atom of C-12 isotope taken as 12.

hope it helps you

The mass number is the sum of the number of protons and neutrons in an atom. It is a whole number. The atomic mass is the average number of protons and neutrons for all natural isotopes of an element.

Based on the amount of sugar added, which sequence ranks the coffee from the sweetest coffee to the least-sweet coffee?

Answers

The coffee from the sweetest coffee to the least-sweet coffee is ranked as follows:

i, ii, iv, iii.

The correct option is D.

What is coffee?

Coffee is a darkly colored, bitter, and slightly acidic drink prepared from roasted coffee beans. The coffee has a stimulating effect on humans, primarily due to its caffeine content.

We will compare which coffee is the sweetest by dividing the masses of coffee in ii and iii by 2 to determine how much sugar there are per 100 g of coffee:

ii. 10 g of sugar added to 200 g of coffee will then be 5 g of sugar per 100 g of coffee.

iii. 4 g of sugar added to 200 g of coffee will then be 2 g of sugar per 100 g of coffee

Therefore we have that :

i. 10 g of sugar per 100 g of coffee

ii. 5 g of sugar per 100 g of coffee

iii. 2 g of sugar per 100 g of coffee

iv. 4 g of sugar per 100 g of coffee

In conclusion, we have that the sweetest coffee is i because it has the biggest amount of sugar per 100 g of coffee, then we have ii, iv, iii in that order.

Learn more about coffee at: https://brainly.com/question/27197896

#SPJ1

This is the full question here;

In a coffee shop, the following coffee samples are prepared for customers.

i. 10 g of sugar added to 100 g of coffee

ii. 10 g of sugar added to 200 g of coffee

iii. 4 g of sugar added to 200 g of coffee

iv. 4 g of sugar added to 100 g of coffee

Based on the amount of sugar added, which sequence ranks the coffee from the sweetest coffee to the least-sweet coffee?

i, ii , iii, iv

iii, iv, ii, i

iv, i, ii, iii

i, ii, iv, iii

Learning task 1 identify the reactant needed in the following chemical equation1. ___ + ___ = Mg(OH)22. ___ + ___ = NaCl3. ___ + ___ = H2SO44. ___ + ___ = Al(PO4)35. ___ + ___ = SO2

Answers

Number 1

The complete reaction:

[tex]MgO\text{ + H}_2O\text{ = Mg\lparen OH\rparen}_2[/tex]

Magnesium oxide + water

MgO + H2O = Mg(OH)2

------------------

Number 2

The reaction:

[tex]2Na\text{ + Cl}_2\text{ = 2NaCl}[/tex]

2 Na + Cl2 = 2 NaCl

------------------

Number 3

The reaction:

[tex]SO_3\text{ + H}_2O\text{ = H}_2SO_4[/tex]

-----------------

Number 4

[tex]Al\text{ + PO}_4=\text{ Al\lparen PO}_4)_3[/tex]

----------------

Number 5

[tex]S\text{ +O}_2=\text{ SO}_2[/tex]

Water's strong hydrogen bonds result in which physical properties? Check all that apply.
high boiling point
low boiling point
high specific heat
low specific heat
density of ice being less than that of liquid water
density of ice being greater than that of liquid water

Answers

The options all that apply are :-

High Boiling Point
High Specific Heat
Density of ice being less than that of liquid water

Explanation:

•Water is a liquid having inter molecular hydrogen bonds and exists as an Associated Molecule.

•Hydrogen bond is formed between different polar molecules , in water (H2O) hydrogen and oxygen are two different molecules and hence it is a polar molecule.

•Since water is an intermolecular hydrogen compound (associated liquid), it has high boiling point than normal liquids and has high specific heat also density of ice is less than that of liquid water .

The correct number of significant figures for the following set of numbers; 1.200, 0.00340, 55000, 80.080 would be
Responses

2, 3, 5, 5
2, 3, 5, 5

4, 5, 2, 4
4, 5, 2, 4

2, 6, 5, 5
2, 6, 5, 5

4, 3, 2, 5

Answers

4,3,2,5

Explanation:

All zero placed to the right of a decimal point in a number are significant.

1.200 = two significant figures

The zero written to the left of the first non-zero digits in a number are not significant.

0.00340 = three significant figures.

The zero written without digits and after non-zero digits are not significant.

55000 = two significant figures.

The zero between two non-zero digits in a number are significant.

80.080 = five significant figures.

PLEASE ANSWER I AM BEGGING

How many milliliters of a stock solution of 7.00 M HNO3 would you have to use to prepare 0.120 L of 0.480 M HNO3 ? If you dilute 20.0 mL of the stock solution to a final volume of 0.270 L , what will be the concentration of the diluted solution?

Answers

Taking into account the definition of dilution:

you have to use 8.23 mL of a stock solution of 7.00 M HNO₃ to prepare 0.120 L of 0.480 M HNO₃.If you dilute 20.0 mL of the stock solution to a final volume of 0.270 L , the concentration of the diluted solution is 0.518 M.

Dilution

Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volume

Volume of stock solution

In this case, you know:

Ci= 7 MVi= ?Cf= 0.480 MVf= 0.120 L

Replacing in the definition of dilution:

7 M× Vi= 0.480 M× 0.120 L

Solving:

Vi= (0.480 M× 0.120 L)÷ 7 M

Vi= 0.00823 L= 8.23 mL (being 1 L= 1000 mL)

Finally, you will need 8.23 mL of the stock solution.

Concentration of the diluted solution

In this case, you know:

Ci= 7 M assuming the stock solution is 7.00 M HNO₃Vi= 20 mL= 0.02 LCf= ?Vf= 0.270 L

Replacing in the definition of dilution:

7 M× 0.02 L= Cf× 0.270 L

Solving:

(7 M× 0.02 L)÷ 0.270 L= Cf

0.518 M= Cf

Finally, the concentration is 0.518 M.

Learn more about dilution:

brainly.com/question/13505906

brainly.com/question/6692004

brainly.com/question/11931563

brainly.com/question/16343005

brainly.com/question/24709069

#SPJ1

If we had 175.5 liters of argon, how many moles would this be?

Answers

Answer:

The number of moles of argon = 7.835moles

Appropriate ratio = 1mole/22.4L

Explanations:

To get the number of moles of argon, we will use the conversion rate as shown:

1 mole = 22.4 L

Convert 175.5 liters of argon to moles

[tex]\begin{gathered} moles\text{ of argon}=175.5\cancel{L}\times\frac{1mole}{22.4\cancel{L}} \\ moles\text{ of argon=}\frac{175.5}{22.4}mole \\ mole\text{ of argon}=7.835moles \end{gathered}[/tex]

The equivalent number of moles of 175.5 liters of argon is 7.835 moles and the appropriate ratio is 1/22.4L

the pH of a 0.010 M HOBr solution is 5.3
a. what is [H+] in that solution?
b. what is [OBr-]? What is [HOBr]? (where do the H+ and OBr- ions come from)?
c. what is the value of Ka for HOBr? What is the value of pKa?

Answers

The [H⁺] of the solution is 5.01 * 10⁶ M

The [OBr⁻] of the solution is 5.01 * 10⁶ M

The [HOBr] of the solution is 0.01 M

The H⁺ and OBr⁻ ions come from the dissociation of the weak acid HOBr.

The value of Ka is 2.51 * 10⁻⁹

The value of pKa is 5.6

What is the pH of a solution?

The pH of a solution is the negative logarithm of the hydrogen ion concentration of a solution.

pH = - log [H⁺]

From the given data:

pH of the solution = 5.3

solving for [H⁺];

[tex][H^{+}] = 10^{-pH}[/tex]

[tex][H^{+}] = 10^{-5.3}[/tex]

[H⁺] = 5.01 * 10⁶ M

The equation of the dissociation of the weak acid, HOBr is given below:

HOBr (aq) ⇄ H⁺ (aq) + OBr⁻ (aq)

Moles of H⁺ (aq) = OBr⁻ (aq)

Therefore, [H⁺] = [OBr⁻]

[OBr⁻] = 5.01 * 10⁶ M

The acid dissociation constant, Ka, is calculated as follows:

Ka = [H⁺] * [OBr⁻] /  [HOBr]

where  [HOBr] = concentration of the weak acid, HOBr.

At equilibrium  [HOBr] >>>  [H⁺] and [OBr⁻]

[HOBr] = 0.010 M

Ka = (5.01 * 10⁶ M *  5.01 * 10⁶ M) / 0.010 M

Ka = 2.51 * 10⁻⁹

pKa = - log (Ka)

pKa = - log (2.51 * 10⁻⁹)

pKa = 5.6

Learn more about acid dissociation constant at:  https://brainly.com/question/10180985

#SPJ1

which of the following substances is insolube in water

Answers

Answer:

Of the given options

; vinegar, salt and sugar completely dissolve in water. However, when sawdust is mixed with water it floats on top indicating it is insoluble in water.

What is the theoretical yield of ammonia if 1.0 g N2 and 1.5g H2 reacted? N2(g)+ 3H2(g)  2NH3(g) ΔG = -9.9 kJ/mol

Answers

The theoretical yield of NH₃ based on the equation of the reaction is 1.82 g.

What is the theoretical yield of a substance?

The theoretical yield of a substance is the amount of a substance that can be produced from the limiting reactants based on the equation of the reaction.

The equation of the reaction is given below:

N₂(g )+ 3 H₂ (g) ---> 2 NH₃ (g) ΔG = -9.9 kJ/mol

Moles of N₂ = 1 / 28

moles of N₂ = 0.0357 moles

Moles of H₂ = 1.5 / 2

Moles of H₂ = 0.75 moles

The limiting reactant is N₂

Mole ratio of N₂ and NH₃ is 1 : 3

Theoretical yield of NH₃ = 0.0357 * 3 * 17

Theoretical yield of NH₃ = 1.82 g

Learn more about theoretical yield at: https://brainly.com/question/25996347

#SPJ1

To what volume should 24 mL of a 6.00 M sulfuric acid solution be diluted in order to obtain a final solution that is 1.50 M?

Answers

They ask us to make a solution starting from a solution with a higher concentration, to find the final volume we will apply the following relationship of concentration and volume:

[tex]C_1V_1=C_2V_2[/tex]

Where,

C1 is the initial concetration, 6.00M

V1 is the initial volume, 24mL

C2 is the final concentration, 1.50M

V2 is the final volumen, unknown

We clear V2 and replace the known data:

[tex]V_2=\frac{C_1V_1}{C_2}[/tex][tex]\begin{gathered} V_2=\frac{6.00M\times24mL}{1.50M} \\ V_2=96mL \end{gathered}[/tex]

The solution has to be diluted until a volume equal to 96mL

Answer: 96mL

Raising the temperature of 10.0 g of water from 10.0°C to 20.0°C requires 418 J, while that increasing 10.0 g of aluminum from 10.0°C to 20.0°C requires 89.7 J. The reason why water requires more heat is because___________.A. water is a liquid and aluminum is a solid. B. 10.0 g of water occupies a larger volume than 10.0 g of aluminum. C. Water has a higher specific heat than aluminum. D. water has higher potential energy than aluminum.

Answers

Answer

C. Water has a higher specific heat than aluminum.

Explanation

Increasing of kinetic energy means the intermolecular attraction decreases. For water between any two molecule, there are strong H-bond (hydrogen bond). So, to overcome their bond energy we need more amount of heat than another substance. So water has a high specific heat capacity.

1. Perform a unit conversion to convert 22 gallons to mL using the following conversion factors:

1 gal = 128 oz

1 fl oz = 29.6 mL

(note, this should be to two significant figures because 22 is two significant figures)

2. Calulate the density of a pice of wood that is 1.05 kg and has a volume of 1,782 mL. Report your answer to three significant figures in g/mL. (note 1,000 g is exactly 1 kg)

Answers

The 22 gallons is equal to  83353.6 ml.

The conversion technique is the technique of converting a business's accounting from unmarried access to double entry.

Calculation:-

1 gal = 128 oz

1 fl oz = 29.6 mL

22 gallons = 128 × 22

                    = 2816 0z

1 fl oz = 29.6 mL

2816 0z = 29.6 × 2816 ml

              = 83353.6 ml

A unit conversion expresses the equal property as a unique unit of dimension. as an instance, time may be expressed in mins in preference to hours, at the same time as the distance may be transformed from miles to kilometers, or ft, or every other measure of period.

Conversion price receives its call due to the fact the prices that make up conversion fees are all of the costs incurred to transform uncooked fabric into a completed top. these fees are direct labor and manufacturing overhead.

Learn more about unit conversion here:-https://brainly.com/question/13016491

#SPJ1

Which of the most common radioactive decay particles-x, B, or y-has the least
energy but the most mass?

Answers

In general, the ionizing power increases while the penetration power decreases as mass increases. Alpha particles have the highest mass when merely comparing the three most prevalent forms of ionizing radiation.

The mass of an alpha particle is around 8,000 times more than that of a beta particle and is roughly four times that of a proton or neutron. The alpha particle has the strongest ionizing strength and the greatest capacity to harm tissue because of its huge mass. However, because of their size, alpha particles are less able to penetrate solid objects.

Although beta particles have significantly more penetrating capability due to their smaller size than alpha particles, they have far less ionizing power (less capacity to harm tissue).

Gamma rays are a high energy kind of electromagnetic radiation rather than particles (like x-rays, except more powerful). Energy that has neither mass nor charge are gamma rays. Gamma rays can penetrate many inches of thick material (like lead) and are therefore shielded by doing so. A human body may allow gamma rays to pass through completely without interacting with anything.

To learn more about radioactive elements from given link

https://brainly.com/question/27660984

#SPJ9

What is Kc at 800K? (The question is in the photo)

Answers

ANSWER

The value of Kc at 800K for the above reaction is 1.1642454865

EXPLANATION

Given that;

[tex]\text{ CO}_{(g)}\text{ + H}_2O_{(g)}\rightleftarrows\text{ CO}_{2(g)}\text{ + H}_{2(g)}[/tex]

The number of moles of CO = 1 mol

The number of moles of H2O = 1 mol

The number of moles of CO2 = 0.519 mol

The volume of the vessel = 11L

To find the value of Kc, follow the steps below

Step 1: Write the equilibrium for the given reaction

[tex]\begin{gathered} \text{ K}_c\text{ = }\frac{[products]}{[reactants]} \\ \text{ } \\ \text{ K}_c\text{ = }\frac{[CO_2]\times[H_2]}{[CO]\times[H_2O]} \end{gathered}[/tex]

Recall, that at equilibrium the mole of CO2 is 0.519 mol

Step 2: Find the mole of each reactant at equilibrium using the stoichiometry ratio

In the above reaction, 1 mole of CO reacts with 1 mole of H2O to give 1 mole of CO2 and 1 mole of H2

Let the number of moles of CO be x

[tex]\begin{gathered} \text{ 1 mol CO }\rightarrow\text{ 1 mol CO}_2 \\ \text{ x mol CO }\rightarrow\text{ 0.519 CO}_2 \\ \text{ cross multiply} \\ \text{ x}\times\text{ 1 = 0.519} \\ \text{ x = 0.519 mol} \end{gathered}[/tex]

The number of moles of CO is 0.519 mol

The next step is to find the number of moles of CO at equilibrium

At equilibrium, the number of mol of CO is calculated below

The number of moles of CO at equilibrium = 1 - 0.519

The number of moles of CO at equilibrium = 0.481 mol

Using stoichiometry ratio, the number of mole o water at equilibrium will also be 0.481 mol

Also, the number of moles of hydrogen at equilibrium is 0.519 mol

Step 3: Find Kc by substituting the calculated values into the formula

[tex]\begin{gathered} \text{ K}_c\text{ at 800K = }\frac{0.519\times0.519}{0.481\times0.41} \\ \\ \text{ K}_C\text{ at 800K = }\frac{0.269361}{0.231361} \\ \text{ Kc at 800K = 1.1642454865} \end{gathered}[/tex]

What is the reason for formulating a product containing active drugs and additive chemicals

Answers

Products containing active drugs and additive chemicals are formulated as medicines for curative purposes as well as for improving the quality of food or food products.

What are medicines?

Medicines are substances that are taken for the prevention or treatment of diseases.

Medicines are prepared from active drugs and additive chemicals.

Active drugs are substances that when taken into the body produce physiological changes in the body.

Drugs are usually used to prepare medicines.

Additive chemicals are added to substances to improve or enhance their qualities.

Learn more about medicines at: https://brainly.com/question/12646017

#SPJ1

What is the mass in grams of 6.75×10^15 molecules of NO2

Answers

Answer:

1.227 x 10^-6

Explanation:

1 mole= 6.022 x 10^23 atoms

(Please see the question in the image) All coefficients that are number two are wrong answers and need to be replaced.

Answers

The balanced equation is:

[tex]2\text{NaN}_{3_{}\text{ }}\text{ }\rightarrow3N_2\text{ + 2Na}[/tex]

The equation is balanced because we have the same amount of elements in the reactants side (to the left of the arrow) and in the products side (to the right of the arrow).

If you have 15.0 g of Na, how many grams of O2 are required for the reactionSodium reacts with oxygen to produce sodium oxide.4Na(s)+O2(g)→2Na2O(s)

Answers

[tex]4Na_{(s)}+O_2\rightarrow2Na_2O_{(s)}[/tex]

Firstly we convert the mass of Na to moles of Na:

[tex]\begin{gathered} _nNa_{(s)}=\frac{mass}{molar\text{ }mass} \\ _nNa_{(s)}=\frac{15.0g}{14\text{ }gmol^{-1}} \\ _nNa_{(s)}=1.07\text{ }mole \end{gathered}[/tex]

Based on the mole ratio 4 moles of Na reacts with 1 mole of O2. Therefore 1.07 mole of Na would react with x mole of oxygen gas. We determine x by:

[tex]\begin{gathered} _nO_{2(g)}=1.07\text{ }mole\div4 \\ _nO_{2(g)}=0.27\text{ }mole \end{gathered}[/tex]

We will now convert 0.27mol of oxygen gas to mass of oxygen gas:

[tex]\begin{gathered} mass=mole\times molar\text{ }mass \\ mass=0.27\times32\text{ }gmol^{-1} \\ mass=8.64g \end{gathered}[/tex]

Mass of O2 is 8.64g

Hydrogen emits light with a wavelength of 410 nm. Find the frequency of this light. Find the energy contained by a single photon of this light in kJ.

Answers

The energy contained by a single photon of this light is 4.84 x[tex]10^{-22}[/tex] J.

λ = 410 nm

V= C/r

Where, V = frequency

C = speed of light

r = wavelength

also 1 nm =[tex]10^{-9}[/tex] m

410nm = 410 x [tex]10^{-9}[/tex]m

V = 3x[tex]10^{8}[/tex]/ 410x[tex]10^{-9}[/tex] = 7.31×[tex]10^{14}[/tex] Hz

E = hc/λ

where h-Planck's constant 6.626x[tex]10^{-34}[/tex] J-S

E = 6.626x[tex]10^{-34}[/tex]X 3X[tex]10^{8}[/tex]

As all values. must be placed in s1 units

410 x10-9

E = Energy 4.84 x[tex]10^{-19}[/tex] Joules.

The light emitted by hydrogen atoms is red because of its four characteristic lines. The strongest line in that spectrum is at 656 nm, the red part of the visible spectrum, and is the number of waves passing through a fixed point per unit of time. Also, the number of cycles or oscillations per unit of time experienced by an object in periodic motion. When you pass an electric current through a tube of hydrogen gas, the electrons of the hydrogen atoms absorb energy and jump to a higher energy level. When these electrons drop to a lower energy level, they emit light.

Learn more about The light emitted here:-https://brainly.com/question/15035620

#SPJ1

Forming a chemical bond ____.

Answers

The ability to build molecules is made possible by a chemical bond, which is a strong attraction between atoms, ions, or molecules. The bond may be created by the sharing of electrons in covalent bonds or by the electrostatic interaction between ions that have opposing charges.

Chemical bonds keep the atoms in molecules together. Electrostatic forces between negatively charged electrons and positively charged atomic nuclei produce bonds (the positions of which in space are determined by quantum mechanics).

The three basic types of bonds are metallic, ionic, and covalent.

Definition: Valence electrons are moved from one atom to the next to finish the outer electron shell, creating an ionic bond. Example: NaCl is a typical ionically bonded substance (Salt)

To know more about chemical bond, click on the link below:

https://brainly.com/question/819068

#SPJ9


Which of the following would be most likely to happen if DNA and RNA remained in the nucleus of
the cell?

O RNA polymerase would link nitrogen bases to DNA but not RNA.
O Transcription could not take place.
O DNA functioning would remain the same, but RNA would not be able to make proteins.
O Both DNA and RNA would be double-stranded.

Answers

Cells read out or express the genetic instructions in their genes through transcription and translation.

RNA Is Produced by the Transcription of Parts of DNAA cell first copies a specific region of its DNA nucleotide sequence a gene into an RNA nucleotide sequence before reading out a necessary component of its genetic instructions.Despite being replicated into a different chemical form, the information in RNA is still expressed using a nucleotide sequence, which is effectively the same language as DNA. Therefore, transcription.Additionally, as we will see in the following chapter, a cell may modify (or regulate) the expression of each of its genes depending on the circumstances, most obviously by managing the RNA it produces.

To Learn more About Cell, Refer:

https://brainly.com/question/26122239

#SPJ9

what is the mole ratio between sodium nitrate and sodium oxide?

Answers

The mole ratio between sodium nitrate and sodium oxide is 2:1.

What is the mole ratio?

The mole ratio between two or more components of a reaction is the stoichiometric number of moles of each component.

The stoichiometric number of mole of a species of a chemical equation is the coefficient of the species when the equation is balanced.

A balanced equation is one in which the number of atoms of elements in the equation is conserved before and after the reaction.

Looking at the equation:

[tex]2NaNO_3 + PbO -- > Pb(NO_3)_2 + Na_2O[/tex]

The number of atoms of each element before and after the reaction is the same.

The coefficient of sodium nitrate is 2.

The coefficient of sodium oxide is 1.

Thus, the mole ratio between sodium nitrate and sodium oxide is 2:1.

More on mole ratios can be found here: https://brainly.com/question/15288923

#SPJ1

can anyone help me with this question please sap

Answers

This question is of longitudinal wave and the answer is given below:-

A. Crest

B. Wavelength

C. Amplitude

D. Trough

E. Cycle

F. Amplitude

In a longitudinal wave the particles are displaced parallel to the direction the wave travels. An example of longitudinal waves is compressions moving along a slinky.

Transverse waves cause the medium to move perpendicular to the direction of the wave. Longitudinal waves cause the medium to move parallel to the direction of the wave.

Learn more about longitudinal wave here:- https://brainly.com/question/6663687

#SPJ1

How many SF does this number have: 0.88400

Answers

Answer:

The number 0.88400 has 3 significant figures.

Explanation:

The number 0.88400 has 3 significant figures because, zeros to the left of the first significant figure is not significant, and only for numbers greater that 1, the zeros to the right of the decimal point are significant.

Other Questions
the continual quest for reelection, that is rooted in high-cost professional campaigns consisting of consultants and expensive media campaigns, is known as What would be the complementary base for the DNA strand TACCGATTGCA?A) ATGGCTAACGTB) ATGGCGAAACGTC) CGTTAGCCATGD) GCATCGCGTGT intestional gas is evidence of active_____in some animals digestive tracts Which characteristic distinguishes active transport from other forms of molecular transport?O It only transports large amounts of substances.O It's used to transport substances outside of a cell.O It only transports larger molecules.OIt requires energy in the form ofATP. why did the byzantines took over the eastern portion of the roman empire? A rectangle has a width of centimeters and a perimeter of centimeters. What is the rectangle's length? Hello, I was wondering what [tex]f(x) = 4 \times {5}^{x} [/tex]would look like if it were graphed The Crab That Played with the Sea,Rudyard KiplingWhat evidence supports the conclusion that the authors purpose is to teach a moral to children question will be in picture why does megamind not have water? the boston massacre in part resulted from group of answer choices the boycott of british goods. a boundary dispute between colonists and british troops. the harassment of british troops by townspeople of boston. the success of the boston tea party. 2. Which of the following is not an effective way for a manager to imple-ment change?a. Do not move too quickly to implement change.b. Do not communicate with employees about the change until a finaldecision has been made.101C. Ask employees for ideas on effective solutions and procedures.d. Be less critical of mistakes made by employees while changes arebeing made. How many calories are provided by a medium sized quarter pounder with cheese value meal from McDonalds. The nutrition information is provided below?protein: 28carbs: 38fat: 30 Which of the following structural features of E. coli is most responsible for the signs and symptoms of a urinary tract infection?FimbriaeCell wallRibosomesFlagella Write an expression that could represent an estimated cost for the party. Use at least one letter. State what each part of the expression represents how much PE would a 100 kg man have on a sled at the top of the hill? What does a strong economy depend on the most?many investors speculating.many banks giving many people loans.most consumers buying on credit.most peoples confidence in the economy. Definicion de ecosistema How did Ethiopias Christians adapt to East African culture? Find the variance of the given data 147, 141, 120, 124, 128 The answers that I already tried are 11.510864 and rounded10.29563 and rounded