The condensing enzyme active site is the only active site not used in the second round of fatty acid synthase.
Fatty acid synthase is an enzyme complex involved in the synthesis of fatty acids. It consists of multiple functional domains or active sites, each responsible for specific chemical reactions in the fatty acid synthesis process. During the second round of fatty acid synthesis, all active sites except the condensing enzyme active site are utilized.
The condensing enzyme active site is involved in the initial condensation of malonyl-ACP (acyl carrier protein) with the growing fatty acid chain. After the first round of synthesis, the growing fatty acid chain is transferred to a different active site, and the condensing enzyme active site remains unutilized in the subsequent rounds.
You can learn more about fatty acid at
https://brainly.com/question/17352723
#SPJ11
The second round of the fatty acid synthesis pathway begins with a new cycle, and this time acetyl-ACP rather than malonyl-ACP is used as the substrate to initiate chain elongation. As a result, malonyl transferase is no longer used, and the other six catalytic activities in fatty acid synthase take over the process of elongating the fatty acid chain. Therefore, Malonyl transferase is the only active site not used in the second round of fatty acid synthase.
Fatty acid synthase is a multifunctional protein enzyme that synthesizes long-chain saturated fatty acids. The synthesis of saturated fatty acids occurs in the cytoplasm of prokaryotes and in the cytoplasmic face of the endoplasmic reticulum (ER) in eukaryotes. Fatty acid synthase contains seven catalytic activities: ketoacyl synthase, ketoacyl reductase, ketoacyl dehydrase, enoyl reductase, malonyl transferase, β-ketoacyl reductase, and acyl carrier protein (ACP). The only active site not used in the second round of fatty acid synthase is malonyl transferase.Malonyl transferase is an active site that attaches the malonyl group to the malonyl-ACP during the first round of the fatty acid synthesis. Malonyl group transfer is essential for elongating fatty acids, since it serves as the building block for the growing chain. The second round of the fatty acid synthesis pathway begins with a new cycle, and this time acetyl-ACP rather than malonyl-ACP is used as the substrate to initiate chain elongation. As a result, malonyl transferase is no longer used, and the other six catalytic activities in fatty acid synthase take over the process of elongating the fatty acid chain. Therefore, Malonyl transferase is the only active site not used in the second round of fatty acid synthase.
To know more about fatty acid visit:
https://brainly.com/question/31752492
#SPJ11
when reactions occur in aqueous solutions, what common types of products are produced?
The common types of products produced when reactions occur in aqueous solutions are acids, bases, and salts.
When chemical reactions occur in aqueous solutions, the products that form may be acids, bases, or salts depending on the nature of the reactants involved. For example, when a strong acid reacts with a strong base, the products formed are water and a salt. If a metal reacts with an acid, the products are salt and hydrogen gas. In some cases, there may be no visible evidence of a chemical reaction as the products remain in solution.
Furthermore, some reactions may involve the exchange of ions, such as precipitation reactions, which occur when an insoluble salt forms due to the mixing of two solutions. In summary, the common types of products that are produced when reactions occur in aqueous solutions are acids, bases, and salts.
Learn more about precipitation reactions here:
https://brainly.com/question/11081618
#SPJ11
for the following equilibrium, if ksp=2.0×10−15, what is the molar solubility of nickel hydroxide? ni(oh)2(s)↽−−⇀ni2 (aq) 2oh−(aq)
The molar solubility of nickel hydroxide (Ni(OH)2) is the maximum amount of nickel hydroxide that can dissolve in water to produce nickel ion (Ni2+) and hydroxide ion (OH-) ions.
To calculate the molar solubility of nickel hydroxide, we need to first write down the balanced chemical equation for the dissociation of nickel hydroxide in water. This is given by:
Ni(OH)2 (s) ↔ Ni2+ (aq) + 2OH- (aq)
The solubility product (Ksp) expression for this reaction can be written as:
Ksp = [Ni2+] [OH-]2 = 2.0×10−15
The molar solubility (x) of nickel hydroxide in water can be determined using the Ksp expression and the stoichiometry of the reaction as follows:
x × (2x)2 = Ksp
= 2.0×10−15x3 = Ksp/4
= 2.0×10−15/4
= 5.0×10−16mol3/L3x
= (5.0×10−16mol3/L3)1/3
= 1.7×10−5 mol/L
Therefore, the molar solubility of nickel hydroxide is 1.7 × 10-5 M.
This implies that in a saturated solution of nickel hydroxide, the concentration of nickel ions is 1.7 × 10-5 M and the concentration of hydroxide ions is twice this value i.e. 3.4 × 10-5 M.
To know more about molar solubility visit:
https://brainly.com/question/31435315
#SPJ11
what is the electron configuration of br if it loses three electrons?
The electron configuration of Br if it loses three electrons is [Ar] 3d10 4s2 4p2. In order to answer this question, we first have to determine the electron configuration of bromine Br.
The electron configuration of bromine (Br) is [Ar] 3d10 4s2 4p5, where [Ar] represents the electron configuration of the noble gas argon. This means that bromine has seven valence electrons in its outermost shell. If it loses three electrons, it will have four valence electrons left.
The electron configuration of Br if it loses three electrons is therefore [Ar] 3d10 4s2 4p2.This is because the loss of three electrons would result in the loss of all of the electrons in the 4p subshell, leaving only the electrons in the 3d and 4s subshells.
To know more about bromine visit:
https://brainly.com/question/29557040
#SPJ11
For The Reaction 2NO(G) + O2(G)2NO2(G) H° = -114.2 KJ And S° = -146.5 J/K The Equilibrium Constant For This Reaction At 275.0 K Is . Assume That H° And S° Are Independent Of Temperature. 2.For The
1. For the reaction
2NO(g) + O2(g)2NO2(g)
H° = -114.2 kJ and S° = -146.5 J/K
The equilibrium constant for this reaction at 275.0 K is .
Assume that H° and S° are independent of temperature.
2.For the reaction
NH4NO3(aq)N2O(g) + 2H2O(l)
H° = -149.6 kJ and S° = 99.9 J/K
The equilibrium constant for this reaction at 256.0 K is .
Assume that H° and S° are independent of temperature.
1. For the reaction
2NO(g) + O2(g)2NO2(g)
Kc = 6.64 × 10^21
2. For the reaction
NH4NO3(aq)N2O(g) + 2H2O(l)
Kc = 2.17 × 10^29.
1. For the reaction
2NO(g) + O2(g)2NO2(g)
H° = -114.2 kJ and S° = -146.5 J/K.
The equilibrium constant for this reaction at 275.0 K is given by:
Kc = e^(-ΔG/RT)
where R = 8.314 J/mol.K;
T = 275 K;
ΔH° = -114.2 kJ/mol and ΔS° = -146.5 J/mol.K
First, ΔG° = ΔH° - TΔS°
ΔG° = -114200 - 275 (-146.5/1000)Δ
G° = -114200 + 40.2125
ΔG° = -114159.79 J/mol
Kc = e^(-ΔG°/RT)
Kc = e^(-(-114159.79)/(8.314 × 275))
Kc = e^(49.51)
Kc = 6.64 × 10^21
2. For the reaction
NH4NO3(aq)N2O(g) + 2H2O(l)
H° = -149.6 kJ and S° = 99.9 J/K.
The equilibrium constant for this reaction at 256.0 K is given by:
Kc = e^(-ΔG/RT)
where R = 8.314 J/mol.K; T = 256 K;
ΔH° = -149.6 kJ/mol and ΔS° = 99.9 J/mol.K
First, ΔG° = ΔH° - TΔS°
ΔG° = -149600 - 256 (99.9/1000)
ΔG° = -149600 + 25.554
ΔG° = -149574.446 J/mol
Kc = e^(-ΔG°/RT)
Kc = e^(-(-149574.446)/(8.314 × 256))
Kc = e^(68.153)
Kc = 2.17 × 10^29.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
1. The equilibrium constant for the reaction 2NO(g) + O₂(g) → 2NO₂(g) at 275.0 K is 840.562.
2. The equilibrium constant for the reaction NH₄NO₃(aq) → N₂O(g) + 2H₂O(l) at 256.0 K is 194.43.
1. To calculate equilibrium constant for the reaction 2NO(g) + O₂(g) → 2NO₂(g) at 275.0 K, we use the following equation:
ΔG° = -RTlnK,
where
ΔG° = -114.2 kJ/mol - (275.0 K)(-146.5 J/K)(1 kJ/1000 J)
= -114.2 kJ/mol + 40.2475 kJ/mol
= -73.95 kJ/mol
R = 8.314 J/mol·K
T = 275.0 K
Substituting these values into the equation above gives:
ΔG° = -RTlnK
-73.95 kJ/mol = -(8.314 J/mol·K)(275.0 K)lnK
lnK = 6.7156K = e6.7156K = 840.56
Thus, the equilibrium constant for the reaction at 275.0 K is 840.562.
2. To calculate the equilibrium constant for the reaction NH₄NO₃(aq) → N₂O(g) + 2H₂O(l) at 256.0 K, we can use the following equation:
ΔG° = -RTlnK,
where
ΔG° = -149.6 kJ/mol - (256.0 K)(99.9 J/K)(1 kJ/1000 J)
= -149.6 kJ/mol + 25.5264 kJ/mol
= -124.07 kJ/mol
R = 8.314 J/mol·K
T = 256.0 K
Substituting these values into the equation above gives:
ΔG° = -RTlnK
-124.07 kJ/mol = -(8.314 J/mol·K)(256.0 K)lnK
lnK = 5.2656K = e5.2656K = 194.43
Thus, the equilibrium constant for the reaction at 256.0 K is 194.43.
Learn more about equilibrium constant: https://brainly.com/question/29809185
#SPJ11
what is the correct assignment of the names of the functional groups in the following nitrogen-containing compounds?
Assignment of the names of the functional groups in nitrogen-containing compounds the nitrogen-containing functional groups are the following: Amine (NH2)Amide (CONH2)Nitrile (C≡N)Nitro (NO2) and Diazo (N2).
1. Amine (NH2): In amines, nitrogen is directly bonded to carbon. This bond can be a single bond or a double bond. The amine group is named based on the number of carbon atoms directly bonded to nitrogen. For example, in the molecule CH3NH2, nitrogen is directly bonded to one carbon, so it is called a primary amine. 2. Amide (CONH2): In amides, nitrogen is bonded to a carbonyl group. The carbonyl group is either an aldehyde or a ketone. The amide group is named based on the carbon atom that is directly bonded to nitrogen. 3. Nitrile (C≡N): In nitriles, nitrogen is bonded to a carbon atom via a triple bond. The nitrile group is named based on the carbon atom that is directly bonded to nitrogen. 4. Nitro (NO2): In nitro compounds, nitrogen is bonded to two oxygen atoms. The nitro group is named based on the carbon atom that is directly bonded to nitrogen. 5. Diazo (N2): In diazo compounds, two nitrogen atoms are bonded together. The diazo group is named based on the carbon atom that is directly bonded to one of the nitrogen atoms.
Example of functional group naming of nitrogen containing compounds: CH3NH2 - Primary amide Acetamide - CH3CONH2 Cyanide - C≡N Nitrobenzene - C6H5NO2 Diazo methane - CH2N2
To know more about functional groups visit:-
https://brainly.com/question/1356508
#SPJ11
what is the purpose of a Alkenes from alcohols analysis by gas chromatography organic chemistry experiment ? ( a mixture of 2-methyl - 1 butene and 2-methyl - 2 butene by dehydration of 2-methyl - 2-butanol )
The purpose of alkene analysis from alcohols by gas chromatography organic chemistry experiment is to determine the products obtained by dehydration of 2-methyl-2-butanol which is a mixture of 2-methyl-1-butene and 2-methyl-2-butene.
A gas chromatography is a chemical analysis process that determines the composition of a sample. The sample in this case will be passed through a column filled with a stationary phase of different substances with different boiling points, and each of these substances will be separated as they pass through the column with the least volatile at the beginning and the most volatile at the end of the column. The time taken by each substance to pass through the column will determine the component of the mixture and thus the quantity in the mixture.
The products obtained by dehydration of 2-methyl-2-butanol are 2-methyl-1-butene and 2-methyl-2-butene. During the reaction, an elimination reaction takes place which removes a molecule of water from 2-methyl-2-butanol to produce a mixture of the two alkenes. The gas chromatography experiment is important since it is the most reliable and fastest way to determine the composition of the mixture.
To learn more on gas chromatography : https://brainly.com/question/32612695
#SPJ11
at 25 °c and 765 torr, carbon dioxide has a solubility of 0.0342 m in water. what is its solubility at 25 °c and 1870 torr?'
The solubility of CO2 in water at 25°C and 1870 torr is 0.0833 m.
Henry's law can be used to solve this problem. It says that at a given temperature, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas in equilibrium with the liquid. Let's solve the problem using this principle.
Let's denote the solubility of CO2 in water at 25°C and 765 torr as S1, and the solubility of CO2 in water at 25°C and 1870 torr as S2.
Now, according to Henry's Law, we have:
P1 / S1 = P2 / S2
where P1 and P2 are the partial pressures of CO2 in torr.
We can rearrange this equation as:S2 / S1 = P2 / P1
Let's plug in the given values:S1 = 0.0342 mP1 = 765 torrP2 = 1870 torr
Now let's solve for S2:S2 / 0.0342 m = 1870 torr / 765 torrS2 = (0.0342 m) x (1870 torr / 765 torr)S2 = 0.0833 m
Therefore, the solubility of CO2 in water at 25°C and 1870 torr is 0.0833 m.
To know more about solubility visit:
https://brainly.com/question/31493083
#SPJ11
What temperature change in C is produced when 800 calories are absorbed by 100 g of water?
the temperature change produced when 800 calories are absorbed by 100 g of water is 8°C.
When 800 calories of heat are absorbed by 100 g of water, the temperature change that occurs can be calculated using the specific heat capacity of water.
The specific heat capacity of water is the amount of heat energy required to raise the temperature of 1 gram of water by 1 degree Celsius. It is 1 calorie/gram°C.
Therefore, to calculate the temperature change in Celsius produced when 800 calories of heat are absorbed by 100 g of water, we can use the following formula:Q = m × c × ΔTwhere Q = heat energy absorbed, m = mass of water, c = specific heat capacity of water, and ΔT = change in temperature.
Substituting the values, we get:800 = 100 × 1 × ΔTΔT = 800/100ΔT = 8°CTherefore, the temperature change produced when 800 calories are absorbed by 100 g of water is 8°C.
For more questions on temperature
https://brainly.com/question/30982315
#SPJ8
how a date is achieved using half life and ratios of parent daughter isotopes
If there were 12.5 daughter isotopes, it would have been 2 half-lives, or 2 million years since the rock formed.By knowing the half-life of the parent isotope and the ratio of parent to daughter isotopes in the rock, scientists can calculate the age of the rock.
Radiometric dating is the process of determining the age of rocks using radioactive isotopes. The half-life of a radioactive element is the time it takes for half of the radioactive atoms to decay. When using half-life and ratios of parent-daughter isotopes, scientists can determine the age of a rock. Here is how a date is achieved using half-life and ratios of parent-daughter isotopes:Radioactive isotopes are incorporated into the rock at formation, and they decay over time. The parent isotope decays into a daughter isotope at a known rate called its half-life. By measuring the ratio of parent to daughter isotopes in the rock, scientists can calculate how long it has been since the rock formed.For example, let's say a rock contains 100 parent isotopes and 25 daughter isotopes. If the half-life of the parent isotope is 1 million years, then after 1 million years, there should be 50 parent isotopes and 50 daughter isotopes. Since there are only 25 daughter isotopes in our rock sample, it must have been 1 half-life, or 1 million years since the rock formed. If there were 12.5 daughter isotopes, it would have been 2 half-lives, or 2 million years since the rock formed.By knowing the half-life of the parent isotope and the ratio of parent to daughter isotopes in the rock, scientists can calculate the age of the rock.
To know more about isotope visit:
https://brainly.com/question/28039996
#SPJ11
can this transformation be accomplished as shown? ch12 3e d3 no, the alcohol in the starting material will not react with the grignard reagent. no, the alcohol in the starting material will react with the grignard reagent. yes, the alcohol in the starting material will not react with the grignard reagent. yes, the alcohol in the starting material will react with the grignard reagent.
The answer to the given question is no, the alcohol in the starting material will not react with the Grignard reagent.
Explanation:
In the given transformation:
ch12 3e d3The reactant is a 1-chlorohexane, which contains a primary halide that will react with the Grignard reagent (3-methyl-2-butanone).In the given starting material, there is an alcohol group attached to the carbon, which means it will not react with the Grignard reagent as it will be more reactive towards its own OH group than the C=O bond of 3-methyl-2-butanone.
Therefore, the correct option is, no, the alcohol in the starting material will not react with the Grignard reagent.
To know more about Grignard reagent refer to:
https://brainly.com/question/16040954
#SPJ11
What volume of a concentrated HCL , which is 36.0% HCL by mass and has a density of 1.179g/mL , should be used to make 5.10 L of an HCL solution with a pH of 1.8?
Concentration is a term used in chemistry to refer to the amount of a substance present in a particular volume or mass of a solvent or mixture. It is expressed as a percentage, weight by volume, or molarity, among other things, and it is used to measure the amount of one or more substances present in a given solution.
The HCL solution has a pH of 1.8, indicating that it is acidic. In order to produce the HCL solution, it will be necessary to add concentrated HCL of a certain volume. Let us determine the volume of concentrated HCL required to make 5.10 L of an HCL solution with a pH of 1.8.
What is meant by concentration?
Concentration is a term used in chemistry to refer to the amount of a substance present in a particular volume or mass of a solvent or mixture. It is expressed as a percentage, weight by volume, or molarity, among other things, and it is used to measure the amount of one or more substances present in a given solution. Density is the amount of mass that a substance contains per unit volume. When a substance has a high density, it is denser than when it has a low density. As a result, density is a key factor in the calculation of the amount of concentrated HCL required to produce a specified amount of HCL solution. A concentrated HCL that is 36.0% HCL by mass and has a density of 1.179 g/mL is the concentrated HCL mentioned in the problem. To determine the volume of concentrated HCL required to make 5.10 L of an HCL solution with a pH of 1.8, we will use the formula for calculating the volume of concentrated HCL, which is given as:
Volume of concentrated HCL = (Molar concentration × Volume of HCL solution) ÷ (Molar concentration of concentrated HCL × Density of concentrated HCL)
Where: Molar concentration = 10-pH
Volume of HCL solution = 5.10 L
Molar concentration of concentrated HCL = 36.0% by mass = 12.1 M = 0.121
Density of concentrated HCL = 1.179 g/mL
Substituting the values we get: Volume of concentrated HCL = (10-pH × Volume of HCL solution) ÷ (Molar concentration of concentrated HCL × Density of concentrated HCL)
Volume of concentrated HCL = (10-1.8 × 5.10 L) ÷ (0.121 × 1.179 g/mL)
Volume of concentrated HCL = 334.68 mL or 0.33468 L
Therefore, the volume of concentrated HCL required to make 5.10 L of an HCL solution with a pH of 1.8 is 0.33468 L.
To know more about molarity visit: https://brainly.com/question/31545539
#SPJ11
Two meshing helical gears are made of SAE 1040 steel, hardened about to 200 Bhn, and are mounted on parallel shafts 6 in. apart. Determine the horsepower capacity of the gearset (a) Applying the Lewis equation and K, = 1.4 for bending strength and the Buckingham equation for wear strength. (b) Applying the AGMA method on the basis of strength only.
Given that the helical gears are made of SAE 1040 steel and hardened to 200 Bhn and the distance between the parallel shafts is 6 in.To determine the horsepower properties capacity of the gearset, two methods will be used, these are:1.
(a) Applying the Lewis equation and K, = 1.4 for bending strength and the Buckingham equation for wear strength. Horsepower capacity of the gearset can be calculated using the Lewis formula:HP = 2NT/33,000 (Ft+FW)...(i)Where, N = pinion speed in rpmT = transmitted load in lbsFt = allowable bending stressFW = allowable surface or wear stress.Using the Lewis bending strength equation, we can find Ft as:Ft = Ks( YB / (YB+1)) (Sf / N ) ... (ii)Where,Ks = Lewis form factor, which is given by 1/(b+1)^(1/2)b = Facewidth in inchesSf = bending stressWt = transmitted loadYB = Lewis bending factor.
YB = 0.154 (βm^3) + 0.757 (βm^2) + 1.77 (βm) + 1.6Here, βm = 0.25 (12- b)/bSf = Ks(YB/(YB+1)) (Sf/N) ...(iii)Using Buckingham’s formula, the allowable wear stress can be calculated as:FW = Cw/((Wp^0.75) x Vp) ... (iv)Where,Cw = wear capacity constantWp = circular pitch in inchesVp = pitch line velocity in feet per minute.Wp = πDm/ZmDm = pitch diameter of gear.Zm = number of teeth on gear.Buckingham formula relates the wear strength of gear to the power transmitted, speed, and tooth geometry.
To know more about properties visit:
https://brainly.com/question/30485469
#SPJ11
For F− , enter an equation that shows how the anion acts as a base. Express your answer as a chemical equation. Identify all of the phases in your answer
For C7H5O2− , enter an equation that shows how the anion acts as a base.
In this regard, let us first discuss the definition of a base is a substance that can accept a proton or hydrogen ion from another molecule. When a base accepts a proton, it forms a conjugate acid.
Hence, a base is a substance that can accept a proton in a chemical reaction. Let us now write the equation for F- acting as a base F- (aq) + H2O (l) → HF (aq) + OH- (aq). The equation shows that the fluoride ion accepts a proton from water, forming the fluoride ion's conjugate acid. In this reaction, fluoride ion (F-) acts as a Bronsted-Lowry base and accepts a proton from water (H2O), forming the conjugate acid, HF and the hydroxide ion (OH-) as shown in the above equation.
Let us now write the equation for C7H5O2− acting as a base C7H5O2- (aq) + H2O (l) ⇌ C7H6O2 (aq) + OH- (aq). The equation shows that benzoate ion acts as a base by accepting a proton from water to form the benzoic acid (C7H6O2) and hydroxide ion (OH-).
To know more about molecule visit:-
https://brainly.com/question/32298217
#SPJ11
how many stereoisomers will be formed from the addition of phenyllithium to this molecule
The addition of phenyllithium to the given molecule will produce three different stereoisomers; two diastereomers and an enantiomer.
For the calculation of stereoisomers from the addition of phenyllithium, we will first identify the given molecule.C6H5-CH2-CH(OH)-CH(Br)-CH3This molecule has four different groups attached to the carbon atom marked as chiral carbon. Hence, it is an asymmetrical molecule and has stereoisomers. Now, when phenyllithium is added to the given molecule, it will form three different stereoisomers.The three stereoisomers are as follows:Pair 1: Trans and Cis Diastereomers.
The two diastereomers are possible in this case because the H and the phenyl groups can either be on the same or opposite sides of the plane that bisects the molecule as shown below:Pair 2: EnantiomerPair 2 is an enantiomer because the Br, OH, and the phenyl group will be reversed relative to each other as shown below:In conclusion, the addition of phenyllithium to the given molecule will form three stereoisomers which include two diastereomers and an enantiomer.
To know more about phenyllithium visit:-
https://brainly.com/question/31477249
#SPJ11
An) reaction is a spontaneous reaction in which the standard change in free energy is negative. (HINT: Think of an energy diagram-type chart). O endothermic endergonic O exothermic exergonic
An exergonic reaction is a spontaneous reaction in which the standard change in free energy is negative.
Exergonic reactions are spontaneous and release energy. When a chemical reaction is exergonic, it releases energy, and its reactants have more energy than its products. This type of reaction releases energy during a reaction, resulting in a net decrease in the Gibbs free energy of the system.
The energy diagram for the exergonic reaction is as follows:It can be seen from the above figure that the reaction proceeds spontaneously from the higher energy state to the lower energy state. The difference between the initial and final states is the energy that is released by the system.Exergonic reaction releases energy and it is a spontaneous process.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
solid sodium carbonate and sodium bicarbonate both release carbon dioxide when treated with acid
Solid sodium carbonate and sodium bicarbonate both release carbon dioxide when treated with acid. When solid sodium carbonate and sodium bicarbonate are treated with acid, they both release carbon dioxide gas.
This is a chemical reaction in which the acid reacts with the carbonate or bicarbonate, forming carbon dioxide gas along with a salt and water. It can be represented as the following:Na2CO3 + 2HCl → 2NaCl + H2O + CO2NaHCO3 + HCl → NaCl + H2O + CO2Sodium carbonate and sodium bicarbonate are commonly used in various household products.
For example, baking soda (sodium bicarbonate) is used in baking as a leavening agent to help dough or batter rise. When baking soda is heated, it decomposes to release carbon dioxide gas, which causes the dough or batter to rise and become fluffy. Sodium carbonate is used in the production of glass, soap, and paper, among other things. In addition, both sodium carbonate and sodium bicarbonate are used as cleaning agents due to their ability to react with acids and release carbon dioxide gas, which helps to remove dirt and stains.
To know more about bicarbonate visit;-
https://brainly.com/question/13929437
#SPJ11
The total pressure of gas collected over water is 770.0 mmHg and the temperature is 25.5 C what is the pressure of hydrogen gas formed in mmHg?
The pressure of hydrogen gas formed in mmHg is 745.7 mmHg. In order to find the pressure of hydrogen gas formed in mmHg, we need to make use of the Dalton's Law of Partial Pressures which states that the total pressure of a gas mixture is equal to the sum of the partial pressures of each individual gas present.
We know that the total pressure of gas collected over water is 770.0 mmHg and that the temperature is 25.5 °C. Since the gas was collected over water, we know that it must have contained some amount of water vapor. This means that the total pressure is equal to the sum of the partial pressures of hydrogen gas and water vapor. Let's use this information to find the partial pressure of hydrogen gas.1.
We can use a table or a graph to find this value. A quick search shows that the vapor pressure of water at 25.5 °C is 24.3 mmHg.2.
Now we can use the Dalton's Law of Partial Pressures to find the partial pressure of hydrogen gas. P total = PH₂ + P water PH₂ = P total - P water
PH2 = 770.0 mmHg - 24.3 mmHg
PH2 = 745.7 mmHg.
Therefore, the pressure of hydrogen gas formed in mmHg is 745.7 mmHg.
To know more about Dalton's Law, refer
https://brainly.com/question/14119417
#SPJ11
what volume of 0.25 m hcl must be diluted to prepare 0.82 l of 7.1×10-2m hcl?
we need to dilute 0.23 L (or 230 mL) of 0.25 M HCl to prepare 0.82 L of 7.1×10^−2
we can use the formula for dilution:
D1V1 = D2V2
Where D is the concentration and V is the volume.
We can rearrange the formula to solve for V1, which is the volume of the concentrated solution that needs to be diluted
:V1 = D2V2 / D1
Now we can plug in the values we know:
D1 = 0.25 MV2 = 0.82 LD2 = 7.1×10^−2 MV1 = ?
So:V1 = (7.1×10^−2 M) (0.82 L) / (0.25 M)V1 = 0.23288 L
We can simplify this to two significant figures, which gives:V1 = 0.23 L
Therefore, we need to dilute 0.23 L (or 230 mL) of 0.25 M HCl to prepare 0.82 L of 7.1×10^−2 M HCl.
learn more about dilution here
https://brainly.com/question/27097060
#SPJ11
Based on the octet rule, determine the number of covalent bonds an atom of the following elements is likely to make in a molecule.
1. C
2. N
3. O
4. F
Based on the octet rule, the number of covalent bonds an atom of the following elements is likely to make in a molecule is 1. C- 4; 2.N-3; 3. O - 2 and 4. F -1 covalent bond.
According to the octet rule, an atom may form as many covalent bonds as it takes to obtain eight valence electrons. This implies that an atom can form one or more covalent bonds with other atoms to fill the valence shell. For instance, carbon, nitrogen, oxygen, and fluorine are members of Groups 14, 15, 16, and 17, respectively.
As a result, each of these elements has four, five, six, and seven valence electrons. Based on the octet rule, the number of covalent bonds that an atom of the following elements is likely to make in a molecule is as follows:
Carbon (C) has four valence electrons, so it can form four covalent bonds to complete its octet.
Nitrogen (N) has five valence electrons, so it can form three covalent bonds and a lone pair, or it can form five covalent bonds to complete its octet.
Oxygen (O) has six valence electrons, so it can form two covalent bonds and two lone pairs or it can form two covalent bonds to complete its octet.
Fluorine (F) has seven valence electrons, so it can form a single covalent bond to complete its octet.
Learn more about the octet rule here:
https://brainly.com/question/30779148
#SPJ11
Complete and balance the following equations in molecular form in aqueous solution. a. The reaction of ammonium nitrate with potassium hydroxide: b. The reaction of oxalic acid with potassium hydroxide: 3. a. What reagent will you put in your buret for today's titration? in2 b. What indicator will you use?
A. The reaction of ammonium nitrate with potassium hydroxide. NH4NO3 (aq) + KOH (aq) → NH3 (g) + KNO3 (aq) + H2O (l).
The reaction is balanced as follows: NH4NO3 (aq) + KOH (aq) → NH3 (g) + KNO3 (aq) + H2O (l) b. The reaction of oxalic acid with potassium hydroxide H2C2O4 (aq) + 2KOH (aq) → K2C2O4 (aq) + 2H2O (l) Oxalic acid (H2C2O4) and potassium hydroxide (KOH) are the reactants of the reaction.
The balanced chemical equation is as follows:H2C2O4 (aq) + 2KOH (aq) → K2C2O4 (aq) + 2H2O (l)3. a. What reagent will you put in your buret for today's titration. The reagent that is put into the buret for a titration depends on the chemical reaction that is taking place.
To know more about hydroxide visit:
https://brainly.com/question/31820869
#SPJ11
the acid-dissociation constant, ka, for an unknown acid ha is 4.57 × 10−3 . what is the base-dissociation constant, kb, for the unknown anion a− ?
The base-dissociation constant (Kb) for the unknown anion a- is 2.19 x 10^-12. The relationship between acid-dissociation constant (Ka) and base-dissociation constant (Kb).
Substituting the value of Ka into the above equation:Ka x Kb = Kw4.57 x 10^-3 x Kb = 1.0 x 10^-14Kb = 1.0 x 10^-14 / 4.57 x 10^-3Kb = 2.19 x 10^-12Long answerThe acid-dissociation constant (Ka) is a measure of the strength of an acid. It is defined as the equilibrium constant for the dissociation reaction of an acid into its conjugate base and a hydrogen ion (H+).
The base-dissociation constant (Kb) is a measure of the strength of a base. It is defined as the equilibrium constant for the dissociation reaction of a base into its conjugate acid and a hydroxide ion (OH-).The relationship between Ka and Kb is given by the following equation:Ka x Kb = Kwwhere Kw is the ion product constant of water and has a value of 1.0 x 10^-14 at 25°C.If we know the value of Ka for an acid, we can use the above equation to calculate the value of Kb for its conjugate base.
To know more about acid-dissociation visit:-
https://brainly.com/question/15012972
#SPJ11
if 6.2 g of butanoic acid, c4h8o2, is dissolved in enough water to make 1.0 l of solution, what is the resulting ph
The main answer to the question is 3.67. The explanation of the process involved in solving the problem is given below:Determine the number of moles of butanoic acid:1 mole of butanoic acid (C4H8O2) has a mass of 88.11 g. Divide the mass of butanoic acid given (6.2 g)
the molar mass (88.11 g/mol) to determine the number of moles.N = (6.2 g) / (88.11 g/mol) = 0.0703 molesFind the concentration of the solution:The concentration of the solution is expressed in terms of moles of solute per liter of solution. Since 0.0703 moles of butanoic acid are dissolved in 1.0 L of solution, the concentration of butanoic acid is 0.0703 M.Find the dissociation constant for butanoic acid:Using a table of dissociation constants, find the Ka value for butanoic acid. The value for butanoic acid is 1.52 × 10-5. This value will be used in the next step.Write the equation for the dissociation of butanoic acid:Butanoic acid (C4H8O2) is a weak acid that dissociates in water to produce H+ ions and the conjugate base (C4H7O2-)
The balanced equation for the dissociation is: C4H8O2 + H2O ⇌ C4H7O2- + H3O+Calculate the concentration of H+ ions in the solution:Using the dissociation constant and the initial concentration of butanoic acid, calculate the equilibrium concentration of H+ ions. The concentration of H+ ions will be used to calculate the pH of the solution.Ka = [C4H7O2-][H3O+] / [C4H8O2]1.52 × 10-5 = [H+][C4H7O2-] / [C4H8O2]Since the initial concentration of butanoic acid equals the concentration of the conjugate base ([C4H7O2-] = 0.0703 M), substitute this value into the equation to solve for the concentration of H+ ions.[H+] = Ka [C4H8O2] / [C4H7O2-]= (1.52 × 10-5)(0.0703 M) / 0.0703 M= 1.52 × 10-5 mol/LNow that the concentration of H+ ions is known, the pH of the solution can be calculated:pH = -log[H+]= -log(1.52 × 10-5)= 3.67Therefore, the resulting pH is 3.67.
To know more about moles visit:
https://brainly.com/question/15209553
#SPJ11
the standard reduction potentials are as follows: mno4- 8h 5e- -- mn2 4h2o. e=1.51 v. when current is allowed to flow, which species is oxidized. cr2o72-
The given reaction in the question can be balanced as shown below: The correct answer is the species Cr2O72- is oxidized.
The given reaction is a reduction reaction as it involves the gain of electrons. A reduction reaction is an addition of electrons to a chemical species. It is opposite of an oxidation reaction. Oxidation is the loss of electrons by a chemical species. When current is allowed to flow, the oxidation reaction occurs at the anode and reduction reaction occurs at the cathode.
Therefore, in this reaction, the species MnO4- is reduced and gets reduced to Mn2+.
Thus, in this reaction, MnO4- is reduced, and the other species (Cr2O72-) present in the solution is oxidized.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
what volume of each solution contains 0.340 mol of nai? part a 0.167 m nai
The volume of 0.340 mol of NaI in 0.167 M NaI solution is 2.036 L. Now, we are supposed to calculate the volume of this solution that contains 0.340 moles of NaI.
The given molarity of NaI solution is 0.167 molarity. Molarity is defined as the number of moles of a solute per liter of a solution. Here, the concentration of NaI in the solution is 0.167 moles/L. Now, we are supposed to calculate the volume of this solution that contains 0.340 moles of NaI.
Let us use the formula: `Molarity = Number of moles / Volume of Solution`We need to calculate the volume, so rearranging the formula we get, `Volume of Solution = Number of moles / Molarity`Volume of the solution containing 0.340 moles of NaI is: `Volume of Solution = 0.340 moles / 0.167 moles/L`= 2.036 LTherefore, the volume of 0.167 M NaI solution that contains 0.340 mol of NaI is 2.036 L.
To know more about moles visit:
https://brainly.com/question/15209553
#SPJ11
how many grams of sodium are required to produce 3.95 grams of sodium hydroxide? assume water is in excess.
1.13 grams of sodium are required to produce 3.95 grams of sodium hydroxide.
Sodium hydroxide is produced through the reaction of metallic sodium with water. Sodium is a highly reactive metal, and it needs to be stored under oil to prevent it from reacting with moisture in the air. Sodium hydroxide is a basic compound, which means that it is a compound that releases hydroxide ions when dissolved in water. The reaction of sodium and water generates sodium hydroxide, hydrogen gas, and heat. The equation for this reaction is given below:
2 Na(s) + 2 H2O(l) → 2 NaOH(aq) + H2(g)
Sodium hydroxide (NaOH) has a molar mass of 40.00 g/mol. Using the balanced chemical equation, we can determine that two moles of sodium (Na) react with two moles of water (H2O) to produce two moles of sodium hydroxide (NaOH). Therefore, the ratio of the number of moles of Na to the number of moles of NaOH is 2:2 or 1:1. This means that the number of moles of Na required to produce a given amount of NaOH is equal to the number of moles of NaOH. To find the number of moles of NaOH produced by 3.95 g NaOH, we divide the mass by the molar mass.
40.00 g NaOH/mol × (1 mol Na/1 mol NaOH) = 40.00 g Na/mol
3.95 g NaOH × (1 mol NaOH/40.00 g NaOH) = 0.0988 mol NaOH
The balanced equation for the reaction of Na and H2O tells us that two moles of Na produce two moles of NaOH. Therefore, to find the number of moles of Na required to produce 0.0988 mol NaOH, we divide the number of moles of NaOH by two.0.0988 mol NaOH × (1 mol Na/1 mol NaOH) × (1/2) = 0.0494 mol Na.
Finally, we can use the molar mass of Na to convert moles to grams. The molar mass of Na is 22.99 g/mol.0.0494 mol Na × 22.99 g Na/mol = 1.13 g Na
To know more about Sodium Hydroxide visit:
https://brainly.com/question/10073865
#SPJ11
Atomic sodium produces a yellow glow (as in some street lamps) resulting from the emission of radiation of 590 nm. What is the energy separation of the levels in responsible for the emission? (Provide your answer in Joules, kJ/mol and eV).
The energy separation of the levels in responsible for the emission is 0.0563 kJ/mol, 0.0563 kJ/mol, 2.105 eV.
E = (hc)/λ
Where h is Planck’s constant, c is the speed of light, λ is the wavelength of the emitted radiation.
Substitute the values in the above formula:
Planck's constant, h = 6.626 × [tex]10^-^3^4[/tex]J·s
Speed of light, c = 2.998 × [tex]10^8[/tex] m/s
Wavelength,λ = 590 nm = 590 ×[tex]10^-^9[/tex] m
E = (6.626 ×[tex]10^-^3^4[/tex]J·s × 2.998 × 10^8 m/s)/590 × [tex]10^-^9[/tex]m
E = 3.376 × [tex]10^-^1^9[/tex] J
Hence, the energy separation of the levels in responsible for the emission is 3.376 × [tex]10^-^1^9[/tex]J (Joules).
To calculate the energy separation of the levels in kJ/mol, we need to convert Joules into kJ/mol. We know that 1 J = 0.001 kJ and 1 mol = 6.022 × 10^23 particles.
So,3.376 ×[tex]10^-^1^9[/tex]J = (3.376 ×[tex]10^-^1^9[/tex]J / 6.022 ×[tex]10^2^3[/tex]) × (6.022 × [tex]10^2^3[/tex])
Therefore, 3.376 × [tex]10^-^1^9[/tex] J = 0.0563 kJ/mol.
Hence, the energy separation of the levels in responsible for the emission is 0.0563 kJ/mol.
To calculate the energy separation of the levels in eV, we need to convert Joules into eV.
We know that 1 J = 6.242 × [tex]10^1^8[/tex] eV.
So,3.376 × [tex]10^-^1^9[/tex] J = 3.376 × [tex]10^-^1^9[/tex] J × (6.242 ×[tex]10^1^8[/tex] eV/1 J)
Therefore, 3.376 ×[tex]10^-^1^9[/tex]J = 2.105 eV.
Hence, The energy separation of the levels in responsible for the emission is 0.0563 kJ/mol, 0.0563 kJ/mol, 2.105 eV.
To know more about Emission refer here :
https://brainly.com/question/24213957
#SPJ11
draw the lewis structure for ccl4 in the window below and then decide if the molecule is polar or nonpolar.
The Lewis structure for CCl4 is: In this molecule, the central atom is carbon which has 4 valence electrons and chlorine atoms have 7 valence electrons.
The total valence electrons in the molecule will be 32 (4*7 + 4*2).To get the Lewis structure of CCl4, first, we need to draw the atoms and connect them with a single bond. After that, we need to fill the valence electrons. It will be 4 electrons on each of the 4 chlorine atoms and 4 electrons on the carbon atom.Then we will add the remaining valence electrons, which will be 4 (8-4) electrons on the carbon atom to complete its octet.
The Lewis structure of CCl4 will have no lone pairs and it will be tetrahedral in shape with bond angles of 109.5 degrees. The molecule of CCl4 is nonpolar because the shape of the molecule is symmetrical and all the chlorine atoms are arranged in the corners of the tetrahedron with equal dipole moments. Thus, the polarities of all bonds in the molecule will cancel each other, making the molecule nonpolar. The polarity of the molecule depends on the distribution of charges in the molecule, which is determined by the molecular shape. If the dipole moments of all the bonds are not equal, then the molecule will be polar, and if the dipole moments are equal, then the molecule will be nonpolar.
To know more about Lewis structure visit:-
https://brainly.com/question/29603042
#SPJ11
How many grams of KCl are needed to make 50.0 ML of 2.45M KCl ? A. 91.3M B. 0.123M C. 9.13M D. 1.52M
Number of moles x Molar massMass of KCl = 0.1225 mol x 74.55 g/molMass of KCl = 9.13 gTherefore, we need 9.13 grams of KCl to make 50.0 mL of a 2.45 M KCl solution. The correct option is (C) 9.13M.
Here, we need to find the number of grams of KCl required to make a 50.0 mL solution with a molarity of 2.45 M. The given options represent different molarities of KCl. Therefore, we need to calculate the molarity of KCl in the given solution, and the option with the same molarity will be the correct answer.
The molarity of a solution can be calculated using the following formula:Molarity (M) = Number of moles of solute (n) / Volume of solution (V) in litersTherefore, to calculate the molarity of KCl, we need to determine the number of moles of KCl present in the solution. The number of moles of KCl can be calculated using the following formula:Number of moles (n) = Mass of solute (m) / Molar mass of solute (M)The molar mass of KCl can be determined by adding the atomic masses of potassium and chlorine atoms.
To know more about moles visit:-
https://brainly.com/question/15209553
#SPJ11
identify the compound with the highest boiling point. question 32 options: ch3ch2ch3 ch3och3 ch3oh ch3cho ch3cn
Out of the given options, CH₃OH is the compound with the highest boiling point. So, the correct option is c.
To determine the compound with the highest boiling point among the given options, we need to consider the intermolecular forces present in each compound.
Intermolecular forces, such as hydrogen bonding, dipole-dipole interactions, and London dispersion forces, play a crucial role in determining the boiling points of compounds. The stronger the intermolecular forces, the higher the boiling point.
Let's analyze each compound:
a. CH₃CH₂CH₃ (propane): Propane is a nonpolar molecule, so it only exhibits London dispersion forces, which are relatively weak intermolecular forces. Therefore, it has a lower boiling point compared to compounds with stronger intermolecular forces.
b. CH₃OCH₃ (dimethyl ether): Dimethyl ether is a polar molecule, allowing for dipole-dipole interactions. However, it lacks the ability to form hydrogen bonds. While dipole-dipole interactions are stronger than London dispersion forces, they are weaker than hydrogen bonding.
c. CH₃OH (methanol): Methanol is a polar molecule capable of forming hydrogen bonds. Hydrogen bonding is a stronger intermolecular force compared to both dipole-dipole interactions and London dispersion forces. Methanol has a higher boiling point than dimethyl ether due to the presence of hydrogen bonding.
d. CH₃CHO (acetaldehyde): Acetaldehyde is a polar molecule with a carbonyl group (C=O), allowing for dipole-dipole interactions. However, it does not have hydrogen bonding. While dipole-dipole interactions are stronger than London dispersion forces, they are weaker than hydrogen bonding.
e. CH₃CN (acetonitrile): Acetonitrile is a polar molecule capable of dipole-dipole interactions. It does not have hydrogen bonding. Similar to acetaldehyde, it has a higher boiling point than propane due to dipole-dipole interactions but a lower boiling point than compounds capable of hydrogen bonding.
Considering the analysis above, the compound with the highest boiling point among the given options is c. CH₃OH (methanol) because it can form hydrogen bonds, which are stronger intermolecular forces compared to dipole-dipole interactions or London dispersion forces.
Learn more about boiling point at https://brainly.com/question/40140
#SPJ11
The question should be:
Identify the compound with the highest boiling point. options: a. CH₃CH₂CH₃ b. CH₃OCH₃ c. CH₃OH d. CH₃CHO e. CH₃CN
(10 points) What is the amount of radioactivity given off by a typical banana that contains 420 mg of Potassium, due to the presence of the natural isotope of 40 K? which has a half-life of 1.248 x 10
The amount of radioactivity given off by a typical banana that contains 420 mg of Potassium, due to the presence of the natural isotope of 40 K, is about 15 Bq.
The half-life of 40K is 1.248 x 10⁹ y, which is about 4.5 x 10¹⁶ s. The number of 40K atoms in 420 mg of Potassium is about 1.2 x 10²¹ atoms. The activity of 40K is given by the following equation:
A = λN
where A is the activity, λ is the decay constant, and N is the number of atoms. The decay constant for 40K is 6.30 x 10⁻¹¹ s⁻¹.
Plugging in the values, we get the following:
A = (6.30 x 10⁻¹¹ s⁻¹)(1.2 x 10²¹ atoms) = 7.5 x 10¹⁰ s⁻¹
The activity of 40K is measured in becquerels (Bq), where 1 Bq = 1 decay per second. So, the activity of 40K in a typical banana is about 15 Bq.
It is important to note that the amount of radioactivity given off by a banana is very small. The average person is exposed to about 300 mSv of radiation per year from natural sources, such as radon gas, cosmic rays, and the food we eat.
The amount of radiation given off by a banana is about 0.000005 mSv, which is about 0.0002% of the average annual exposure from natural sources. So, eating a banana will not increase your risk of radiation exposure.
To know more about the radioactivity refer here :
https://brainly.com/question/32007161#
#SPJ11
Complete question :
What is the amount of radioactivity given off by a typical banana that contains 420 mg of Potassium, due to the presence of the natural isotope of 40 K? which has a half-life of 1.248 x 10⁹ y and is 0.0117% of all Potassium. Atomic mass of K is 39.0983 g and A = 6.023 x 10 23 atoms
