Answer:
Where's the array for stuff?
Explanation:
Depending on how stuff[0] was declared or instantiated because I'm assuming it's not a constant, I need more info on stuff.
I'm in Code HS and I'm trying to make this Circle shrink. I already know how to make it grow but am having trouble with shrinking it. Any help? (4.2.5 Growing/Shrinking Circles)
To make the circle shrink, you can start by using a loop to decrease the circle's size over time.
You can achieve this by setting a variable for the circle's size and then decreasing it by a certain amount within the loop until it reaches the desired size.For example, you can start with a variable 'circleSize' set to a value that represents the maximum size of the circle. Then, within the loop, you can decrement 'circleSize' by a certain amount, such as 5 or 10 pixels, until it reaches the desired minimum size.Make sure to update the circle's size at each iteration of the loop to reflect the new 'circleSize' value. You may also want to include a delay to control the speed of the shrinking animation.To know more about coding visit:
https://brainly.com/question/17293834
#SPJ1
you have a thin-provisioned storage space that suddenly unmounts. what is the most likely cause of this problem? answer the storage space has become corrupted. the storage space has run out of disk space. a new storage device has been added to the pool. one of the disks in the storage space pool has crashed.
There is no more disc space available for storage. You wish to set up 100 gigabytes of storage space per drive for a number of people in your firm.
What drawbacks are there to thin provisioning?absence of elastic Although allowing you to increase your disc space as needed, thin provisioning is a non-elastic technology. To put it another way, you can increase your space allocation but not decrease it.
How is it possible to give users access to more storage space than is available in the pool thanks to thin provisioning?Thin provisioning gives users the amount of disc space they need at any given time on demand. More data is saved by the user, consuming more space on the disc.
To know more about gigabytes visit:-
https://brainly.com/question/25222627
#SPJ1
write a program that takes in three integers and outputs the largest value. if the input integers are the same, output the integers' value.
Answer:
#include <iostream>
int findLargest(int a, int b, int c) {
if (a == b && b == c) {
return a;
} else {
int largest = a;
if (b > largest) largest = b;
if (c > largest) largest = c;
return largest;
}
}
int main() {
int a, b, c;
std::cout << "Enter the first integer: ";
std::cin >> a;
std::cout << "Enter the second integer: ";
std::cin >> b;
std::cout << "Enter the third integer: ";
std::cin >> c;
int largest = findLargest(a, b, c);
std::cout << "The largest integer is: " << largest << std::endl;
return 0;
}
Explanation:
The function findLargest takes in three integers a, b, and c. If all the integers are the same, it returns the integer. Otherwise, it compares the values of a, b, and c and returns the largest value. In the main function, the three integers are read from the user, and the result of findLargest is printed to the screen.
which of the following are generally specified by a protocol? select all that apply. indicate important network devices. actions taken on message transmission/reception events. precise rate of message transmission. format of a message. circuit switching. order of exchange of messages.
-Actions taken on message transmission/reception events, Format of a message and Order of exchange of messages are generally specified by a protocol.
Option B, D and F are correct.
Transmission: What is it?A computer program called Transmission is made to move data from one computer to another. It is a cross-platform, open-source BitTorrent client made to make file sharing over the internet easier.
It supports peer exchange, encryption, proxy support, and web seed support and is available for Windows, Linux, and Mac OS X. Users can search for and download torrents directly from the program thanks to its support of Magnet URIs. It also supports the scripting language Lua, which lets users automate tasks and customize their experience.
Question incomplete:which of the following are generally specified by a protocol? select all that apply.
A. indicate important network devices.
B. actions taken on message transmission/reception events.
C. precise rate of message transmission.
D. format of a message.
E. circuit switching
.F.order of exchange of messages.
Learn more about protocol:
brainly.com/question/5660386
#SPJ4
on average there are 35 objects downloaded per second, and the average object size is 50,000 bits. what is the traffic intensity on the 2 mbps access link?
Answer:
0.875
Explanation:
To calculate the traffic intensity on a 2 Mbps access link, we need to know the amount of data that is being transmitted per second. To do this, we can multiply the number of objects downloaded per second (35) by the average object size (50,000 bits).
[tex]35 objects * 50,000 bits/object = 1,750,000 bits/second[/tex]
Next, we can divide the total data transmitted per second by the link capacity.
[tex]1,750,000 bits/second / 2,000,000 bits/second = 0.875[/tex]
So, the traffic intensity on the 2 Mbps access link is 0.875. This means that the link is being used at 87.5% of its capacity.
9. in a while loop, the controlling condition is checked at the start of each iteration. true or false?
Answer:
true
Explanation:
Which is the term for data collection that collects data at a distance, such as by satellite?A) remote sensingB) heat sensingC) mobile sensingD) local sensing
Answer:
remote sensing
Explanation:
Answer:
(A) Remote sensing
Explanation:
a computer models how physicians diagnose illness. this is an example of
A computer simulates how doctors make medical diagnoses. Artificial intelligence (AI) or machine learning is demonstrated here (ML).
This is an illustration of expert systems, a particular subset of artificial intelligence. Expert systems are computer programmes that simulate a human expert's problem-solving abilities in a certain subject, in this example, that of a doctor. The computer models are created by combining machine learning techniques with a database of medical information. The expert system may detect sickness and suggest treatments based on a patient's symptoms and medical history, thereby increasing the precision and timeliness of diagnosis. AI is being utilised more and more in the medical field to help with diagnostic and treatment choices.
learn more about computer here:
https://brainly.com/question/15707178
#SPJ4
Please help! ESSAY: TELESCOPES
Research the critical new developments in telescopes. Write a 200-word paper on the new developments.
OLEASE DONT EXPLAIN HOW TO DO IT, AND WRITE ME AND ACTUAL ORIGINAL ESSAY :)
Answer:
Telescopes have been used to observe space since the 1600s and have been continually improved and developed to give us a better understanding of the universe. Over the past few decades, there have been many critical new developments in telescopes that have allowed us to explore further and gain a deeper understanding of the universe.
One major development has been the use of mirrors to reflect and focus light to achieve greater magnification and resolution. This has allowed telescopes to observe distant objects in greater detail and at greater distances. Another major advancement has been the use of segmented mirror designs that allow for larger apertures and thus larger fields of view. This has allowed for greater coverage of the night sky and for more accurate observations.
In addition, the introduction of adaptive optics has allowed for telescopes to adjust their focus in real-time to compensate for atmospheric turbulence, allowing for much sharper images. Another development has been the introduction of space telescopes, allowing us to observe the universe without the interference of the Earth's atmosphere. The Hubble Space Telescope and the James Webb Space Telescope are examples of this type of telescope.
Finally, the development of space-based observatories has allowed for greater accuracy in observation than ever before. These observatories use multiple telescopes to observe a single object, allowing for greater accuracy and detail.
All of these developments have allowed us to observe the universe in greater detail and to gain a deeper understanding of its many mysteries. Telescopes have become increasingly powerful and precise, and have allowed us to explore further and deeper than ever before.
In programming && is considered an arithmetic operator. True/False.
In programming && is considered an arithmetic operator---- False. The double ampersand operator && is considered a logical operator rather than an arithmetic operator when used in programming.
Which logical operator is it?A type of operator that is utilized in programming to carry out logical operations on one or more Boolean values or expressions is known as a logical operator. Based on the evaluation's outcome, these operators are used to evaluate conditions and direct program execution.
The three primary logical operators are:
The AND (&&) operator evaluates to true in programming when both of its operands are true, and to false otherwise.
The OR (||) operator, on the other hand, evaluates to true only if both of its operands are false, and to true only if at least one of its operands is true.
The WRONG operator negates its operand's value. These operators are used to control a program's flow and evaluate logical expressions.
For logical AND operations on two Boolean values or phrases, programmers use the logical operator && (double ampersand). It returns true if both operands are true; If not, it will return false. It is not regarded as an operator in mathematics.
Mathematical operations like addition, subtraction, multiplication, division, and modulus are carried out with the help of arithmetic operators. +, -, *, /, and % are some common arithmetic operators used in programming languages.
Therefore, the assertion that the programming operator && is an arithmetic operator is incorrect because it is a logical operator. Arithmetic operators are used to perform mathematical operations on numerical values, whereas logical operators are used to evaluate logical expressions and control program flow.
Learn more about logical operator:
brainly.com/question/13382096
#SPJ4
1. Which team had the most accurate device? How can you tell (justify)?
2. Which team had the most precision with their device? How can you tell( (justify)?
Answer:
please man me brainliest i don't have the right answer but hope this helps
Explanation:
You can measure precision by finding the average deviation, which calculates the average of the differences in measurements. Data can be precise without being accurate, but ideally, the measurements are both precise and accurate to produce quality results.
digital transmission permits higher maximum transmission rates when compared to analog. group of answer choices true false
True. Digital transmission can transmit data faster and more accurately than analog transmission.
What is Transmission?
Transmission is a free and open-source software for downloading, sharing and distributing electronic files, such as music, videos, images and documents. It is a cross-platform application that runs on multiple operating systems (including Windows, Mac, Linux, and BSD), allowing users to easily access and share files with others. It is an efficient, reliable and lightweight program that enables users to securely download, upload and share files with others, while providing an intuitive user interface. Transmission also offers advanced features, such as bandwidth control, encryption, proxy support, torrent creation, and more. It uses the BitTorrent protocol to share files and is one of the most popular BitTorrent clients available.
To know more about Transmission
https://brainly.com/question/24373056
#SPJ4
true or fasel,With the Discretionary Access Control (DAC) model, no object has an owner; the system has total control over that object.
Answer: False
Explanation:
False. With the Discretionary Access Control (DAC) model, each object has an owner who sets access permissions to control who can access that particular object. This gives the owner of an object control over who can access that particular object. The system does not have total control; the owner decides who is allowed to access the object.
False, with the Discretionary Access Control (DAC) model, an object does have an owner, and the owner has control over that object.
The Discretionary Access Control (DAC) model is a type of access control that allows the owner of an object to decide who can access the object and what level of access they have. The owner can grant or deny access to the object at their discretion. This is different from the Mandatory Access Control (MAC) model, where the system has total control over an object and decides who can access it.
Therefore, the statement "With the Discretionary Access Control (DAC) model, no object has an owner; the system has total control over that object" is false. In the DAC model, the owner of an object has control over that object, not the system.
Lear More About Access Control
https://brainly.com/question/27961288
#SPJ11
b)what information is kept in the process table? how many areas of the operating system are using the process table to store data?
System monitoring utilities and tools also use the process table to show users data about active processes.
What details are stored in an operating system's process table?Each item in the table, which is frequently referred to as a context block, provides details about a process, including its name, state (described below), priority (discussed below), registers, and any pending semaphores (discussed later). Depending on the operating system, a context block's precise contents will vary.
Which information is kept in the process tables?The Linux kernel has a data structure called the process table that contains details about every process that is currently active. Process IDs, memory use statistics, and file descriptor usage are all listed in the process table process IDs, memory use, file descriptor usage, and other information are all contained in the process table.
To know more about data visit:-
https://brainly.com/question/29555990
#SPJ4
External Hard Drive
Removable hard drive located outside of the main computer tower.
It provides additional storage space for files and data. An external hard drive is usually connected to the computer via a USB cable.
What is Hard Drive?
A hard drive is a device that stores digital data in a magnetic format on rapidly spinning disks. It is the main storage device in a computer, allowing it to store large amounts of data that can be quickly accessed by the user. Hard drives are typically composed of several platters, or disks, that are coated with a magnetic material. Data is written to and read from the platters in a process called magnetic recording. The data is stored as tiny magnetic regions that represent 0s and 1s, the same as a computer's electronic memory. The data is organized into sectors, or small blocks of data, which are then put together to form files.
To know more about Hard Drive
https://brainly.com/question/28493309
#SPJ4
what is the proper way of creating a thread class if the class has already inherited members from another class?
The proper way to create a thread class when the class already inherits members from another class is to extend the Thread class in your class and override the run() method.
What is Threads?
Threads is an operating system feature that enables multiple tasks to be performed at once. It is an approach to concurrent programming that allows a program to divide itself into two or more simultaneously running tasks. These tasks are known as threads and are executed concurrently. Threads are a lightweight alternative to processes, making them ideal for applications that require multiple computations to be performed simultaneously. Threads allow for efficient multitasking and can reduce the amount of time it takes to complete a task.
To know more about Threads
https://brainly.com/question/13155644
#SPJ4
according to power information network, as of 2009, the average term for a new-car loan was nearly months. a) 12 b) 24 c) 36 d) 64
The average term for a new-car loan in 2009 was roughly 36 months. This means that a borrower would usually have three years to repay the loan in full.
The average term for a new-car loan in 2009 was roughly 36 months. This means that a borrower would usually have three years to repay the loan in full. The length of the loan term is important to consider when deciding to purchase a vehicle, as it affects the size of the monthly payments. Additionally, a longer loan term can also increase the total interest paid over the life of the loan. Generally, shorter loan terms have higher monthly payments but less interest paid in the long run. When taking out a loan to purchase a vehicle, it’s important to consider all of these factors and decide the best option for your financial situation.
Learn more about average here
https://brainly.com/question/24057012
#SPJ4
A resistor with a large physical size (I.e.,large dimensions ) gender has
In comparison to a resistor with a smaller physical size, a resistor with a larger physical size typically has a lower resistance value. This is thus because a resistor's resistance is directly inversely correlated with its cross-sectional area and directly correlated with its length.
what do you mean by resistor?A piece of electronics that opposes the flow of current in a circuit. Carbon in the form of chunks, thin films, or other resistant materials is frequently used to create resistors. Wires looped around a cylinder can also be used to create them. In order to block undesirable electrical signals, resistors are used in electrical equipment like computers and cell phones. Contrary to popular belief, resistors are extremely necessary to the proper operation of electronics even though they consume energy.
How do computer resistors work?A resistor is an electrical component with two terminals that generates electrical resistance in circuits. Resistors have a variety of roles in electronic circuits, including limiting current flow, controlling signal levels, dividing voltages, biasing active components, and terminating transmission lines.
To know more about Resistors visit:
https://brainly.com/question/13265041
#SPJ1
Write a console based program for the acme burrito company. The acme burrito company offers 3 types of burritos: beef, bean, and supreme. This program should prompt the user for their name and how many of each type of burrito they want to order (this means that they will be prompted for how many beef, bean and supreme burritos
This program prompts the user for their name and the number of beef, bean, and supreme burritos they want to order.
Here is an example program in Python that prompts the user for their name and the number of each type of burrito they want to order:
# prompt user for their name
name = input("Please enter your name: ")
# prompt user for how many of each type of burrito they want to order
num_beef = int(input("How many beef burritos do you want? "))
num_bean = int(input("How many bean burritos do you want? "))
num_supreme = int(input("How many supreme burritos do you want? "))
# calculate the total cost of the order
beef_cost = 4.99 * num_beef
bean_cost = 3.99 * num_bean
supreme_cost = 6.99 * num_supreme
total_cost = beef_cost + bean_cost + supreme_cost
# print the order summary
print("Name:", name)
print("Beef burritos:", num_beef)
print("Bean burritos:", num_bean)
print("Supreme burritos:", num_supreme)
print("Total cost:", total_cost)
This program prompts the user for their name and the number of beef, bean, and supreme burritos they want to order. It then calculates the total cost of the order based on the number of each type of burrito, and prints a summary of the order including the customer's name, the number of each type of burrito ordered, and the total cost.
Learn more about program :
https://brainly.com/question/3224396
#SPJ4
Which of the following is most likely to be a complement to coffee? a) decal coffee b) baked beans c) tea d) creamer.
Creamer among the following is most likely to be a complement to coffee. Creamer comes in many different flavors, including organic, non-dairy, and flavored varieties
Option D is correct.
Creamer: What is it?Coffee and tea's flavor and texture are enhanced with creamer, a type of dairy product. It typically consists of cow's milk and vegetable oils like soybean or coconut oil, making it a thicker liquid than milk. Cream, sugar, and a variety of flavorings can also be used to make creamer. It gives drinks a velvety, creamy texture and is typically used sparingly. Creamer comes in many different flavors, including organic, non-dairy, and flavored varieties. Cappuccinos, lattes, and other popular coffee drinks can all be made with it.
Learn more about creamer:
brainly.com/question/451835
#SPJ4.
problem 1. (40 points) consider the following relational database: student ( student number , name ) course ( course number , year , semester , classroom ) registration ( ? ? ? ) (a) (10 points) identify an appropriate primary key for each of the student and course relations. assume that (i) each student is assigned a unique number, (ii) for each combination of year and semester (e.g., 2023 spring), each course is assigned a unique course number, and (iii) a course with a certain course number (e.g., csi 410) may have been offered multiple times (e.g., 2022 fall and 2023 spring). explain why the primary key that you have chosen for the course relation is a candidate key. (b) (10 points) given your choice of primary keys for the student and course relations, identify appropriate attributes for the registration relation. this registration relation must store data regarding the courses that each student has taken. assume that a student may have taken a course (e.g., csi 410) multiple times (e.g., 2022 spring and 2022 fall). also, identify an appropriate primary key for the registration relation. (c) (10 points) given your choice of primary keys, identify all of the foreign keys. for each foreign key, specify the referencing and referenced relations. (d) (10 points) describe a situation where an attempt to update the registration relation violates a foreign key constraint. explain why your answer is correct.
Removing a row from a foreign key table while leaving the related entry in the primary key table intact.
Using a referential integrity rule will prevent you from adding data to table Y that cannot be linked to data in table X. In order to maintain referential integrity, any records that are linked to a removed record from table X must also be deleted. A database is considered to be in referential integrity when all values for all foreign keys are valid. Foreign keys are a column or set of columns in a table that must contain values that correspond to at least one of the main key or unique key values of a row in its parent table. The necessary entry from the linked primary key table must still be present when removing a row from a database with foreign keys.
Learn more about Referential integrity here:
https://brainly.com/question/29534597
#SPJ4
When using cellular service, your device transmits data via ______.
Answer:
When using cellular service, your device transmits data via radio waves over the airwaves of a mobile network. The data is sent to a nearby cell tower, which then forwards it to the network's servers for processing and ultimately to its destination.
Explanation:
When using cellular service, your device transmits data via radio waves. These radio waves are sent and received by cell towers, which are responsible for transmitting the data to and from your device.
Cellular phone work in the same way as the other wireless devices we have discussed. The signals that carry digital voice, text, and data are transmitted via radio waves from one device to another device.
It is important to note that different types of cellular service, such as 3G, 4G, and 5G, use different frequencies of radio waves to transmit data. These frequencies are important terms to understand when discussing cellular service and how it works.
Learn more about transmits data by cellular phone here; https://brainly.com/question/28643101
#SPJ11
it takes 1 second of transmission delay to send a packet over a link. how many seconds does it take to transmit 100 packets over three hops? assume that all links have the same bandwidth and that all packets are the same size. ignore all other delays.
To transmit 100 packets over three hops, each packet must be transmitted over each of the three links, for a total of 3 transmissions per packet.
How to calculate transmissions of packets?
There is a 1 second transmission delay for each link, for a total of 3 seconds of delay per packet.
Therefore, the total time to transmit 100 packets over three hops can be calculated as follows:
Total time = (number of packets) x (number of transmissions per packet) x (delay per transmission)
Total time = 100 x 3 x 1
Total time = 300 seconds
So, it would take 300 seconds to transmit 100 packets over three hops, assuming all links have the same bandwidth and all packets are the same size, and ignoring all other delays.
To learn more about packets, visit: https://brainly.com/question/28140546
#SPJ4
assume that the turtlebot uses a* tree search with manhattan distance heuristic (using path lengths) to generate the navigation path. what will be the path returned?
The environment as well as the starting and goal points will influence the return path. Taking into account the distances between the start and goal points as well as any obstacles in the way
A tree search using the Manhattan distance heuristic will typically return the path with the shortest overall path length.
Dot the turtle does what?The dot() function is used to draw a circular dot with some color and a particular size. The maximum of pensize+4 and 2*pensize is used if the size is not specified.
In Python, what does "turtle" stand for?By providing users with a virtual canvas, turtle, a pre-installed Python library, enables them to create pictures and shapes. The library takes its name from the turtle-shaped onscreen pen that is utilized for drawing.
Learn more about turtle dot:
brainly.com/question/18846647
#SPJ4
jackson asked his five staff members to complete a customer service training course online. the program will allow him to see which staff members have enrolled and how much of the program they have completed. this computer program is an example of a(n) .
E-learning, often known as web-based training, involves providing learners with browsers instruction anytime, anywhere, over the internet or a corporate intranet.
Why is it crucial to confirm that a training program's content aligns with the organization's goals?Employees will gain more knowledge from a training that is beneficial and important to them. A training course that does not teach the employees the skills the business requires them to have is a waste of money.
Why is it crucial to finish a training requirements analysis before creating a training strategy?A training needs assessment is concerned with identifying the information, skills, and abilities that employees of an agency must possess in order to satisfy the performance criteria.
To know more about browsers visit:-
https://brainly.com/question/28504444
#SPJ4
in a multiprogramming and timesharing environment, several users share the system simultaneously. this situation can result in various security problems. name two types of protection that the os must then provide.
A user has the ability to prevent other users from performing any system-related actions. The private data of other users may be tampered with by one user. One person has secret access to the private data of other users.
In a multiprogramming and time-sharing context, what do several users have in common?Many users and processes are given access to computer resources in designated time slots under this time-sharing operating system. The issue with memory and processor underutilization has been fixed, and the CPU can now execute numerous programs. It is termed multiprogramming for this reason. Many users share the processor's time.
In what situations is a time-sharing system preferable to a personal or single-user system for a user?When might a user benefit more from utilizing a time-sharing system than a PC or single-user workstation? When several users or processes need to engage with a shared resource (such as whiteboards) or interact with other users.
to know more about protection here:
https://brainly.com/question/28180162
#SPJ4
on print eo4.1 (1 of 4), what does the square symbol with an f inside and an attached triangle represent?
The square symbol with an f inside and an attached triangle represents a fire alarm audio/visual signaling device. The correct option is b.
What is a square?An item used in engineering and technical design with the purpose of supplying a straightedge at a right angle or another specific planar angle to a baseline is known as a set square or triangle.
Deaf and hard of hearing people are warned of a fire using visual alarm devices (VADs). To warn individuals who cannot hear the fire alarm system's sounder, they generate flashing light pulses.
Therefore, the correct option is b. Fire alarm audio/visual signaling device.
To learn more about the square, refer to the link:
https://brainly.com/question/19711761
#SPJ1
The question is incomplete. The missing options are given below:
4" square box
Fire alarm audio/visual signaling device
Fire alarm pull station
Fountain for drinking water
a company wants to transmit data over the telephone, but is concerned that its phones could be tapped. all of the data are transmitted as four-digit integers. the company has asked you to write a program that encrypts the data so that it can be transmitted more securely. your program should read a four-digit integer and encrypt it as follows: replace each digit by (the sum of that digit plus 7) modulus 10. then, swap the first digit with the third, swap the second digit with the fourth and print the encrypted integer. your main duty for this assignment is creating an encrypt class which includes encrypt.h and encrypt.cpp. after finishing the task you can use cisp400v10a2.cpp to test the encrypt class. the following is the encrypt class specification. 1. the encrypt class has an integer private data member 8 element array named digits. the first four elements (0 ~ 3) are to store the original 4 digits integer and the next four (4 ~ 7) are to store the encrypted data. 2. encrypt class has several public member functions a. an encrypt constructor takes an integer of any digits and stores the last four digits. it encrypts the last four digits, stores the encrypted information, displays a call to the constructor information, and shows the original information and encrypted information. if the inputted number is less than or equal to 0 the integer is set to 9436. b. a displayoriginaldata function does not accept and return any data. it displays the first four elements of the private data member. page 3 of 6 cisp400v10a2 3 c. a storedata function takes an integer and does not return anything. it stores the last four digits of the passed in integer to the first 4 elements of the private data member, encrypts the data and store them in the last 4 elements of the private data member. d. a displayencrypteddata function does not accept and return any data. it displays the last four elements of the private data member.
The Encrypt class is a class that is used to encrypt data that is transmitted over the telephone. The class has an integer private data member which is an 8-element array named digits.
What is encrypt data?Encrypting data is a process of transforming plain text data into a form that is unreadable to anyone except the intended recipient. It is used to protect the confidentiality of data and to ensure that it is only available to those who are authorized to access it.
The first four elements (0-3) are used to store the original four-digit integer, and the next four (4-7) are used to store the encrypted data.
The Encrypt class has several public member functions. The first is an encrypt constructor which takes an integer of any digits and stores the last four digits. It then encrypts the last four digits, stores the encrypted information, displays a call to the constructor information, and shows the original information and encrypted information. If the inputted number is less than or equal to 0, the integer is set to 9436.
The next public member function is the displayOriginalData function which does not accept and return any data. It simply displays the first four elements of the private data member.
The third public member function is the storeData function which takes an integer and does not return anything. It stores the last four digits of the passed in integer to the first 4 elements of the private data member, encrypts the data and stores them in the last 4 elements of the.
To learn more about encrypt data
https://brainly.com/question/30011139
#SPJ4
Which tier in the three-tiered network is responsible for routing traffic in and out of a network?
The tier responsible for routing traffic in and out of a network is the "edge tier" or "access tier".
What is the role of the edge tier?
This is the tier that connects end-user devices, such as computers, phones, and printers, to the network and provides access to the services and resources on the network. It also connects the network to external networks, such as the Internet, and handles the routing of traffic between the network and external networks. The other two tiers in the three-tiered network architecture are the "distribution tier", which provides aggregation and distribution of network services and resources, and the "core tier", which provides high-speed switching and transport of data across the network.
To know more about edge-tier, Check out:
https://brainly.com/question/28235758
#SPJ1
when you can determine the value of a field using information from existing fields in a record in a query, you should create a(n) .
the expression is complete, you can save the calculated field in the query and it will be available for use in the query.
1. A calculated field is a field in a query that is created by performing calculations on existing fields.
2. To create a calculated field, you need to determine the value of a field using information from existing fields in a record.
3. This can be done by using an expression in the query, which will involve performing calculations on the existing fields in the record.
4. Once the expression is complete, you can save the calculated field in the query and it will be available for use in the query.
Learn more about query here
https://brainly.com/question/14311643
#SPJ4
