Answer:
Limiting reactant is CS2
% yield = 131.8 %
Explanation:
Using the alanced equation given, Mole ratio of C to CS2 is 1 : 5.
That is, for every 1 mole of CS2 used, 5 moles of Carbon is produced.
35g of CS2 --- [tex]\frac{35}{76.14}[/tex] moles
= 0.4597 moles
⇒ mass of C produced = 5 × 0.4597 × 12 g/mol
= 27.6 g of C.
Percentage yield (%) = [tex]\frac{actual- yield}{theoretical- yield}[/tex]
= [tex]\frac{36.4}{27.6} * 100[/tex] =131.9%
Which statements correctly describe the rock cycle? Check all that apply.
Rocks are preserved through the process.
Rocks change from one type to another.
Different rock groups are interrelated.
Rocks change from one type to another in a specific order.
Environmental conditions influence a change in rock type.
Answer: I italicize for checking
Rocks are preserved through the process.Rocks change from one type to another.Different rock groups are interrelated.Rocks change from one type to another in a specific order.Environmental conditions influence a change in rock type.
Explanation:
Rocks are preserved, as in you can't destroy them completely, but no, they don't stay the same they change.
Examples of gravitational potential energy.
Answer:
the top of the roller coaster
Explanation:
the roller coaster at the top when it has the most potential energy reaches Peak when its going to convert into kinetic energy
PLEASE HELP :"( DUE NOW!!
What is the equation for the equilibrium constant for this equation?
CO+3H2⇌CH4+H2O
[H2O][H2]/[CH4][CO]
[CO][H2]3/[CH4][H2O]
[CH4][H2O]/[CO][H2]3
[CH]4[H2O]/[H2]3
Answer:
The correct answer is
[CH4][H2O]/[CO][H2]3
Option 3 is correct
Explanation:
Step 1: Data given
For the equation aA + bB ⇆ cC + dD
The equilibrium constant is [C]^c * [D]^d / [A]^a*[B]^b
Step 2: Calculate the equilibrium constant Kc
CO+3H2⇌CH4+H2O
Kc = [H2O][CH4] / [CO][H2]³
The correct answer is
[CH4][H2O]/[CO][H2]3
Option 3 is correct
What is the correct answer? Please
Answer:
c
Explanation:
Use the drop-down menus to identify each substance as an organic or inorganic compound
ozone (O3):
methane (CH4):
aluminum hydroxide (Al(OH)3):
butane (C4H10):
carbon monoxide (CO):
Answer:
ozone (O3): inorganic
methane (CH4): organic
aluminum hydroxide (Al(OH)3): inorganic
butane (C4H10): organic
carbon monoxide (CO): inorganic
Explanation:
An inorganic compound is typically a chemical compound that lacks carbon–hydrogen bonds, that is, a compound that is not an organic compound. Some simple compounds that contain carbon are often considered inorganic. Examples of inorganic compounds include carbon monoxide , carbon dioxide , carbonates, carbides , cyanides, cyanates, and thiocyanates. Most of these compounds are normal parts of mostly organic systems, including living organisms. When a chemical substance is classified as inorganic, it does not necessarily mean that it does not occur within
living things.
Organic compounds typically contain the carbon-hydrogen bonds. The carbon atoms often catenate and most organic substances occur in living systems and are products of biochemical reactions in living organisms. However, organic substances can also be synthetic and can be prepared in the laboratory.
Answer:
inorganic
organic
inorganic
organic
inorganic
Explanation: trust me
Use the information provided in the table to determine the Kb for acetate ion, the conjugate base of acetic acid. 1.8 × 10-19 5.6 × 10-10 2.8 × 10-9 1.8 × 1010
Answer:
B. 5.6 × 10^-10
Explanation:
The Kb for the acetate ion can be obtained from; Kb = [CH3COOH] [OH-]/[CH3COO-]
The Kb of acetate ionThe term Kb refers to the base dissociation constant of a substance. We know that the Kb for the acetate ion can be obtained from;
Kb = [CH3COOH] [OH-]/[CH3COO-]
The numerical value of the Kb can be obtaned if we have the concentrations of the various species in the equation above.
Learn more about Kb: https://brainly.com/question/19165803
#SPJ2
Which of these is a conversion from chemical energy to mechanical energy?
A. A dark light bulb starting to glow
B. A ball rolling down a hill
C. A person lifting a weight
D. A potato being heated in an oven
Answer:
C . A person lifting a weight
A sample of a compound contains 60.0 g C and 5.05 g H. It’s molar mass is 78.12 g/mol. What is the compound’s molecular formula?
Answer:
C6H6
Explanation:
C : 60.0 g*1 mol/12 .01g = 5.00 mol
H: 5.05 g * 1 mol/1.01 g= 5.10 mol
C:H = 5.00 mol : 5.10 mol = 1:1
CH is an empirical formula
Molar mass (12.01 +1.01)=13.02 g/mol
78.12g/mol /13.02 g/mol =6
Molecular formula is the empirical that was taken 6 times (CH)6 = C6H6
Answer:
C. C6H6
Explanation:
For edge
help help help.
the answer choices are
a. gas
b. mirrors
c. steam
d. photovoltaic cell
Answer: I'm not totally sure if this is multiple choice or not but it's definitely D.
Explanation:
Why did the United States government set aside land for the first national parks?
A.
They wanted to settle the west as quickly as possible.
B.
They worried people would destroy the animals and land.
C.
They worried Native Americans wouldn’t have anywhere to go.
D.
They wanted to make sure all citizens would get a piece of land.
Answer:
b
Explanation:
hope it helps
PLEASE HELP LOL ‼️‼️
Accoring to KMT gases are_____
mostly empty space
or
very dense
or
organized
Answer:
Explanation:
mostly empty space
Which of these Electromagnetic waves has the most kinetic energy and can be
dangerous?
O radio waves
O gamma rays
O ultraviolet waves
O visible light
Answer:
Gamma Rays.
Explanation:
Gamma-ray photons have the highest energy in the EMR spectrum and their waves have the shortest wavelength.
If I have 12.0 volume of gas at pressure of 1.10 and temperature of 200k, what is the number of moles? (R=8314)
Answer:
7.94 x 10^6 mol
Explanation:
PV=nRT
n=(PV)/(RT)
n=(1.10*12.0)/(8314*200)
n=7.94 x 10^6 mol
Two objects, labeled A and B, are the same size. Object A has a density of 1.21 g/cm3. Object B has a density of 1.37 g/cm3. Both are placed in a beaker of water. Which will float higher in the water?
Answer:
object a will float higher because it has less density.
Explanation:
Answer:
object a will float higher because it has less density.
Explanation:
Referencing the reasoning you used from #1, explain the difference between objects that feel hot and those that
feel "cold".
Answer:
The temperature of the cold water is lower than the warm one. So, when we put the hand in the warm from the cold water, our hand will absorb heat, causing the hand to feel hot. Thus, we can conclude that the more heat it absorbs, the more hotter it is. Whereas the more heat it releases, the colder it is.
The theoretical yield is the amount of product actually produced.
a. True
b. False
Answer:
a. True
Explanation:
Theoretical yield is the amount of product that could be obtained if a chemical reaction has 100% efficiency.
Hope it helps...
Show ur working:
What mass of sulfur trioxide is formed from 96g of sulfur dioxide?
2 SO2+O2 –> 2 SO3
Answer:
120 g SO3
Explanation:
128 g SO2 -> 160 g SO3
96 g SO2 -> x
x= (96 g SO2 * 160 g SO3)/128 g SO2
x= 120 g SO3
The mass of sulfur trioxide, SO₃, formed is 120 g
The balanced equation for the reaction is given below:
2SO₂ + O₂ —> 2SO₃Next, we shall determine the mass of SO₂ that reacted and the mass of SO₃ produced from the balanced equation. This can be obtained as follow:
Molar mass of SO₂ = 32 + (16×2)
= 32 + 32
= 64 g /mol
Mass of SO₂ from the balanced equation = 2 × 64 = 128 g
Molar mass of SO₃ = 32 + (16×3)
= 32 + 48
= 80 g /mol
Mass of SO₃ from the balanced equation = 2 × 80 = 160 g
Thus,
From the balanced equation above,
128 g of SO₂ reacted to produce 160 g of SO₃.
Finally, we shall determine the mass of SO₃ by the reaction of 96 g of SO₂. This can be obtained as follow:
From the balanced equation above,
128 g of SO₂ reacted to produce 160 g of SO₃.
Therefore, 96 g of SO₂ will react to produce = [tex]\frac{96 X 160}{128}\\\\[/tex] = 120 g of SO₃.
Therefore, the mass of SO₃ formed is 120 g
Learn more: https://brainly.com/question/18474161
If you decrease the amount of gas, what happens to the pressure? Explain WHY.
Answer:
Gas particles exert pressure by colliding with the walls of their container. If you reduce the volume, you are effectively increasing the density of the particles and they will collide with the walls more frequently, leading to an increase in pressure.
Explanation:
enjoy!
can somebody help me name this organic compound!!
Answer:
diethyl pentane bro.............
Answer:
Nonane
Explanation:
C₉H₂₀
Nonane is the name for the straight-chained hydrocarbon with nine carbons and 20 hydrogens.
If a woman is pushing a cart 125 N forward and gravity is pushing 50 N backwards on the cart and a child is pushing 25 N backwards on the cart what is the net force?
Answer: 50N forward
Explanation:
A woman is pushing a cart 125N forward (+125N)
Gravity is pushing 50N backwards (-50N)
A child is pushing 25N backwards (-25N)
The net force is the total sum of these forces.
125N+(-50N)+(-25N)
125N-50N-25N
125N-75N
50N forward because it's positive
Answer:
Explanation: A woman is pushing a cart 125N forward (+125N)
Gravity is pushing 50N backwards (-50N)
A child is pushing 25N backwards (-25N)
The net force is the total sum of these forces.
125N+(-50N)+(-25N)
125N-50N-25N
125N-75N
50N forward because it's positive
Which of the following gases will diffuse the fastest at room temperature?
H2
Ne
He
O2
Answer:
I am pretty sure that it is A. H2.
Explanation:
Sorry if it's wrong.
The mole concept will most likely be used in
Answer:
determining how many ozone molecules are lost in the atmosphere
Pls Mark as Brainliest!!! if this helps..
Where do diamonds come from?
Answer: Diamonds were first discovered and mined in India over 2,400 years ago.
Explanation: Over time, diamonds were found in many other areas around the world, including many in Africa. In today's trade, Africa, Russia, Australia, and Canada produce the most diamonds.
~Wonderopolis
Answer:
Diamonds are formed when under the heat and pressure of the earth's gravity. Diamonds have to be underground to be formed so they should be underground. Digging to Y11 is deep enough to find diamonds .
What are all of the possible products of the electrolysis of Sodium Chloride in aqueous solution of water when the electrodes are made of copper?
A photo has been provided to show what is happening
Answer:
HDHERFEHFFFHRF
Explanation:
The pressure of a gas is 1.35 atm at temperature of 21oC. If the volume and amount of gas is unchanged, what pressure would be needed for the temperature to raise to 36oC?
Answer:
2.31 atm
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
Which of the following is a chemical property of liquid water?
Its density is 1.00 g/cm3.
It reacts with sodium metal to form sodium hydroxide and hydrogen gas
It flows.
It freezes to form ice.
It boils at 100°C.
Answer:
B) it reacts with sodium metal to form sodium hydroxide and hydrogen gas
Explanation:
B is the only option that show a chemical property, density, freezing, and boiling points are physical properties.
Which of the following would form an electrolyte solution?
O A. Oil in water
B. Sand in water
C. Sugar in water
D. Salt in water
Answer:
D: Salt in water
Explanation:
Correct name of the compound
Answer:
Calcium Nitride
Explanation:
How much NaOH (in grams) is needed to prepare 463 mL of solution with a pH of 10.020?
Answer: [tex]1.94\times 10^{-3}g[/tex] of NaOH
Explanation:
pH or pOH is the measure of acidity or alkalinity of a solution.
pH is calculated by taking negative logarithm of hydrogen ion concentration.
[tex]pH=-\log [H^+][/tex]
Putting in the values:
[tex]10.020=-\log[H^+][/tex]
[tex][H^+]=9.55\times 10^{-11}[/tex]
[tex][H^+][OH^-]=10^{-14}[/tex]
[tex][OH^-]=\frac{10^{-14}}{9.55\times 10^{-11}}=1.05\times 10^{-4}M[/tex]
[tex]NaOH\rightarrow Na^++OH^-[/tex]
[tex]Molarity=\frac{moles\times 1000}{\text {Volume in ml}}[/tex]
[tex]1.05\times 10^{-4}M=\frac{moles\times 1000}{463ml}[/tex]
moles = [tex]4.86\times 10^{-5}[/tex]
Mass of [tex]NaOH=moles\times {\text {Molar mass}}=4.86\times 10^{-5}\times 40=1.94\times 10^{-3}g[/tex]
Thus [tex]1.94\times 10^{-3}g[/tex] of NaOH is needed to prepare 463 mL of solution with a pH of 10.020
Which element easily loses one electron to form a positive ion? A. Magnesium (Mg) B. Lithium (Li) C. Nitrogen (N) D. Fluorine (F)
Answer: Lithium (Li)
Explanation:
Once it loses its only valence electron, there’s no longer a negative charge.
