The pH of the solution is 5.72, which is slightly acidic.
pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm of the hydrogen ion concentration (H+) in a solution. The pH scale ranges from 0 to 14, where a pH of 7 is neutral, pH below 7 is acidic, and pH above 7 is basic. The formula to calculate pH is pH = -log[H+], where [H+] represents the concentration of hydrogen ions in moles per liter.
Given the H+ concentration of 1.9x10-6, we can calculate the pH of the solution as follows:
pH = -log(1.9x10-6) = 5.72
It is important to note that pH is an important factor in various chemical and biological processes. It can affect the solubility of certain substances, enzymatic activity, and the growth and survival of living organisms. Maintaining the appropriate pH is crucial for the proper functioning of these processes.
for more questions on slightly acidic
https://brainly.com/question/15342347
#SPJ11
help with questions 1-5 pls??
In comparison to towns located inland, cities close to water features like lakes or oceans typically experience cooler summer temperatures.
Why is a city not so hot in summer when the city is close to water?Since water has a higher specific heat capacity than land, this is the case. The quantity of energy needed to raise a substance's temperature by a specific amount is known as its specific heat capacity. Compared to land, raising the temperature of water requires more energy because water has a higher specific heat capacity.
The summer sun warms both land and water, but due to land's lower specific heat capacity, land warms up more quickly than water. As a result, communities farther from water bodies tend to be hotter than cities closer to water.
Learn more about specific heat capacity:https://brainly.com/question/29766819
#SPJ1
Draw a model of the four types of nuclear decay and explain each. Pick the same element (Si-32) to start with.
Sure, I can explain the four types of nuclear decay and provide a model for each using Si-32 as an example.
Si-32 is a radioactive isotope of Silicon with 14 protons and 18 neutrons.
1. Alpha Decay:
In alpha decay, an unstable nucleus emits an alpha particle, which consists of two protons and two neutrons, reducing the atomic number by two and the mass number by four. This makes the resulting nucleus a different element.
Model: Si-32 → alpha particle + Mg-28
Explanation: Si-32 decays into an alpha particle (two protons and two neutrons) and becomes Mg-28.
2. Beta Decay:
In beta decay, a neutron is converted into a proton and an electron. The proton stays in the nucleus, and the electron is emitted as a beta particle. This increases the atomic number by one while keeping the mass number the same.
Model: Si-32 → beta particle + P-32
Explanation: Si-32 decays into a beta particle (an electron) and becomes P-32.
3. Gamma Decay:
Gamma decay occurs when an unstable nucleus emits high-energy photons called gamma rays. Unlike alpha and beta decay, gamma decay does not change the atomic number or mass number of the nucleus.
Model: Si-32 → Si-32 + gamma ray
Explanation: Si-32 emits a gamma ray but remains Si-32.
4. Electron Capture:
In electron capture, an unstable nucleus absorbs an electron from an inner shell, converting a proton into a neutron. This reduces the atomic number by one while keeping the mass number the same.
Model: Si-32 + electron → Al-32
Explanation: Si-32 captures an electron and becomes Al-32.
These four types of nuclear decay can occur in radioactive isotopes, and they result in a change in the atomic number and/or mass number of the nucleus.
please help show i need help
The complete table for the phase changes would be as follows:
solid to liquid: melting, heating, IMF's breaking, energy absorbedliquid to gas: vaporization, heating, IMF's breaking, energy absorbedsolid to gas: sublimation, heating, IMF's breaking, energy absorbedliquid to solid: freezing, cooling, IMF's forming, energy releasedgas to solid: deposition, cooling, IMF's forming, energy releasedgas to liquid: condensation, cooling, IMF's forming, energy releasedWhat are phase changes?Phase changes occur when a substance changes from one phase to another. When a significant amount of energy is gained or lost, this process takes place.
Phase change also depends on elements like pressure and temperature.
There are six ways a substance can change between these three phases; melting, freezing, evaporating, condensing, sublimation, and deposition.
Learn more about phase changes at: https://brainly.com/question/25664350
#SPJ1
Jeremiah is conducting an investigation about the water cycle. He is given the following materials:
a lamp
a glass jar that contains water
plastic wrap
Describe how Jeremiah can arrange these materials to create a model that shows the processes by which water is cycled from a lake into the atmosphere and back to the lake. Be sure to identify what each material represents in the model.
Input Field 1 of 1
Skip to input field
Jeremiah can arrange the materials in the following way to create a model that shows the processes by which water is cycled from a lake into the atmosphere and back to the lake
What is the water cycle?The following can be a representation of the water cycle;
Fill the glass jar with water to resemble the lake.
Put the lamp next to the jar to symbolize the sun.
Wrap the jar in plastic sheet to imitate the atmosphere.
Turn on the bulb to represent the sun warming the water.
When the water in the jar warms up and evaporates into water vapor, moisture will condense on the plastic wrap.
The water vapor will ascend and collect on the plastic wrap to represent the water vapor rising into the atmosphere.
Water vapor cools as it rises and condenses back into liquid form, as shown by the water droplets gathering on the plastic wrap.
Learn more about the water cycle:https://brainly.com/question/31195929
#SPJ1
A sample of gas is contained in a 245 mL flask at a temperature of 23.5°C. The gas pressure is 37.8 mm Hg. The gas is moved to a new flask, which is then immersed in ice water, and which has a volume of 54 mL. What is the pressure of the gas in the smaller flask at the new temperature?
We can use the combined gas law to solve this problem:
(P1V1/T1) = (P2V2/T2)
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
We are given that the initial pressure is P1 = 37.8 mm Hg and the initial volume is V1 = 245 mL. The initial temperature is T1 = 23.5°C, which we need to convert to Kelvin by adding 273.15:
T1 = 23.5°C + 273.15 = 296.65 K
We are also given that the final volume is V2 = 54 mL, and the final temperature is the temperature of the ice water, which is 0°C or 273.15 K.
Now we can solve for the final pressure, P2:
(P1V1/T1) = (P2V2/T2)
P2 = (P1V1T2) / (V2T1)
P2 = (37.8 mm Hg * 245 mL * 273.15 K) / (54 mL * 296.65 K)
P2 = 24.4 mm Hg
Therefore, the pressure of the gas in the smaller flask at the new temperature is 24.4 mm Hg.
Н
HOH
14
Н-С-С-С-Н
I
ННН
List the number of each atom in the formulas above:
H
НН Н
Н-С-С-С-О-Н
LI
НН Н
DONE
Н Н
H
Н-С-С-О-С-Н
II
Н Н
H
Answer:
Explanation:
It seems like you’re trying to count the number of atoms in some chemical formulas. Here’s the list of the number of each atom in the formulas you provided:
Formula 1: Н - 1 Formula 2: H - 1, O - 1 Formula 3: Н - 14 Formula 4: Н - 2, C - 3 Formula 5: I - 1 Formula 6: Н - 3 Formula 7: H - 2 Formula 8: Н - 2, C - 3, O - 1 Formula 9: Li - 1 Formula 10: Н - 2 Formula 11: Н - 2 Formula 12: H - 1 Formula 13: Н - 2, C - 2, O - 1 Formula 14: II
Silver chloride, AgCl, is a sparingly soluble solid. Answer the following questions about a saturated solution prepared by placing solid silver chloride in a 2.45 10-5 M NaCl(aq) solution. At some temperature, the silver ion concentration, [Ag+], was found to be 5.36 10-6 M.
(a) What is the concentration of chloride ions, [Cl − ], in the resulting solution?
The solubility of silver chloride (AgCl) can be represented by the following equilibrium equation:
AgCl(s) ⇌ Ag+(aq) + Cl-(aq)
In a saturated solution of AgCl, the concentration of Ag+ ions is equal to the solubility product constant (Ksp) for AgCl at that temperature. Since the concentration of Ag+ ions in the solution is given as 5.36 x 10^-6 M, we can write:
[Ag+] = 5.36 x 10^-6 M
According to the stoichiometry of the equilibrium equation, the concentration of chloride ions ([Cl-]) is also equal to the concentration of Ag+ ions, as one mole of AgCl dissociates to yield one mole of Ag+ ions and one mole of Cl- ions. Therefore:
[Cl-] = 5.36 x 10^-6 M
So, the concentration of chloride ions in the resulting solution is 5.36 x 10^-6 M.
For more questions on: silver
https://brainly.com/question/30665133
#SPJ11
The density of a test gas is to be determined experimentally at 289.2 K using an apparatus constructed of a 4.050 L glass bulb volume that is attached to a vacuum pump. The mass of the evacuated bulb is 22.513 g. After it is filled with the test gas to a pressure of 0.0250 atm, the mass increases to 22.651 g. Assume the gas behaves ideally.
What is the density of the gas? How many moles of gas are in the bulb? What is the apparent molar mass of the gas?
The density of the gas is 0.0340 g/L, moles of gas in the bulb is 0.00124 mol and apparent molar mass is 111.3 g/mol.
How to calculate density, moles and molar mass?To determine the density of the gas, use the ideal gas law:
PV = nRT
where P = pressure, V = volume, n = number of moles, R = gas constant, and T = temperature.
Since the volume and temperature are constant:
(P/n) = constant
Therefore, the density (ρ) of the gas is given by:
ρ = (m-m₀)/V = (Δm)/V
where m = mass of the bulb filled with the gas, m₀ = mass of the evacuated bulb, and Δm = m - m₀ is the mass of the gas.
Substituting the given values:
Δm = 22.651 g - 22.513 g = 0.138 g
V = 4.050 L
ρ = 0.138 g / 4.050 L = 0.0340 g/L
To find the number of moles of gas in the bulb, use the equation:
n = PV/RT
Substituting the given values:
n = (0.0250 atm)(4.050 L) / (0.0821 L·atm/mol·K)(289.2 K) = 0.00124 mol
Finally, to find the apparent molar mass of the gas, use the equation:
M = m/n
where M = molar mass of the gas and m = mass of the gas.
Substituting the given values:
M = 0.138 g / 0.00124 mol = 111.3 g/mol
Therefore, the density of the gas is 0.0340 g/L, there are 0.00124 mol of gas in the bulb, and the apparent molar mass of the gas is 111.3 g/mol.
Find out more on molar mass here: https://brainly.com/question/31600958
#SPJ1
Write the cations and anions present in CrO2
The chemical molecule CrO2 is also known as chromium(IV) oxide or chromic acid. It has the molecular formula CrO2 and is an inorganic substance.
In the solid state, CrO2 exists as a solid with a layered structure, and it is considered a cationic compound. The cation present in CrO2 is chromium(IV) ion, denoted as Cr4+.
On the other hand, the anion present in CrO2 is oxide ion, denoted as O2-. The oxidation state of oxygen in this compound is -2.
So, the cations present in CrO2 are Cr 4+ ions, and the anions present are O2 -2 ions.
In CrO2, the cation present is Chromium (Cr) with a charge of +4, and the anion present is Oxygen (O) with a charge of -2.
For more questions on: chromic
https://brainly.com/question/13059491
#SPJ11
What do not have true leaves or roots
Answer: Moss
Explanation: It's a flowerless plant
Which solution would you choose to supress the dissolution of MgCO3?
A. 0.200 M NaCl
B. 0.200 HCl
C. 0.200 M NaNO3
D. 0.200 M Na2CO3
The best solution to suppress the dissolution of MgCO3 is option D 0.200 M Na2CO3
To suppress the dissolution of MgCO3We need to add an ion or compound that will react with MgCO3 and form a precipitate, thus removing Mg2+ and CO32- ions from the solution.
Therefore, Option D, 0.200 M Na2CO3, contains CO32- ions that can react with Mg2+ ions to form MgCO3 precipitate. This would effectively suppress the dissolution of MgCO3 by removing Mg2+ and CO32- ions from the solution.
Therefore, option D is the best solution to suppress the dissolution of MgCO3.
Learn more about dissolution here : brainly.in/question/14694236
#SPJ1
Help!!!!!!!!!!!!!!!!!!!!!!!
All of the equation-related claims are not entirely true. The appropriate chemical formula should be:
Fe(OH)3 + 3NH4Cl = FeCl3 + 3NH4OH
Because the total mass of the reactants and products are equal, as well as the number of each type of atom in each of the reactants and products, mass is conserved in this balanced equation. Depending on the stoichiometric coefficients in the balanced equation, there may or may not be an equal amount of molecules in the reactants and products.
Iron(III) hydroxide (Fe(OH)3) and ammonium chloride (NH4Cl) are the products of the chemical reaction between iron(III) chloride (FeCl3) and ammonium hydroxide (NH4OH).
The coefficients (the numbers in front of the chemical formulae) must be changed to make sure that the number of each type of atom is the same on both sides of the equation in order to ensure that the equation is balanced. The coefficients in this instance are:
Fe(OH)3 + 3NH4Cl = FeCl3 + 3NH4OH
Learn more about coefficients at :
https://brainly.com/question/29993529
#SPJ1
A sample of air occupies 0.75 L at standard conditions. What is the pressure in atm if the volume is 100.0 mL at 25oC?
P1 = 760 mmHg P2 = ?
V1 = 0.750 L V2 = 100.0 mL
T1 = 273 K T2 = 25oC
According to the ideal gas law, a gas's pressure is inversely related to its volume and directly proportionate to its temperature. So, if a gas sample's volume is reduced, the gas sample's pressure must also increase.
As a result, in order to determine the pressure of the gas sample under the specified circumstances, we must first determine the ratio of the two volumes before multiplying the starting pressure of the sample by that ratio.
We may get the ratio of the two volumes using the ideal gas law as follows: V2/V1 = (100.0 mL/0.75 L) x (273 K/25oC) = 8.02 As a result, the gas sample's pressure at 25 oC with a volume of 100.0 mL is 8.02 times higher than the sample's original pressure.
Learn more about gas at:
https://brainly.com/question/3637358
#SPJ1
A solution has [H+] = 1.39x10^-6 M. What is the pH?
Answer:
the pH of the solution is approximately 5.857.
Explanation:
The pH of a solution can be calculated using the formula:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in moles per liter (M).
In this case, [H+] = 1.39x10^-6 M, so:
pH = -log(1.39x10^-6)
= 5.857
Therefore, the pH of the solution is approximately 5.857.
Write the net chemical equation for the production of manganese from manganese (II) carbonate, oxygen and aluminum. Be sure your equation is balanced.
Answer:
Explanation:
The chemical equation for the production of manganese from manganese (II) carbonate, oxygen, and aluminium can be represented as follows:
3MnCO3(s) + 3O2(g) + 4Al(s) → 3Mn(s) + 3CO2(g) + 2Al2O3(s)
In this equation, manganese (II) carbonate (MnCO3) reacts with oxygen (O2) and aluminium (Al) to produce manganese (Mn), carbon dioxide (CO2), and aluminium oxide (Al2O3). The equation is balanced with three molecules of manganese carbonate, three molecules of oxygen, and four molecules of aluminium reacting to produce three molecules of manganese, three molecules of carbon dioxide, and two molecules of aluminium oxide.
PLS MARK ME BRAINLIEST
The enthalpy combustion of ethanol is -1430 kJ/mol. Determine heat given off from the combustion of 1 dm³ of ethanol. Given density of ethanol is 0.79 gcm³. (molar mass ethanol = 46 g/mol)
Answer:
The enthalpy of combustion of ethanol is -1430 kJ/mol, which means that for every mole of ethanol that is burned, 1430 kJ of heat is released.
To determine the amount of heat given off from the combustion of 1 dm³ of ethanol, we need to first calculate the number of moles of ethanol in 1 dm³.
1 dm³ is equivalent to 1000 cm³. Since the density of ethanol is 0.79 g/cm³, the mass of 1 dm³ of ethanol can be calculated as:
mass = density x volume
mass = 0.79 g/cm³ x 1000 cm³
mass = 790 g
To convert this mass to moles, we need to divide by the molar mass of ethanol:
moles = mass / molar mass
moles = 790 g / 46 g/mol
moles = 17.17 mol
Therefore, 1 dm³ of ethanol contains 17.17 moles of ethanol.
To calculate the heat given off from the combustion of 1 dm³ of ethanol, we can use the following equation:
heat = enthalpy of combustion x moles of ethanol
heat = -1430 kJ/mol x 17.17 mol
heat = -24,551 kJ
Therefore, the heat given off from the combustion of 1 dm³ of ethanol is -24,551 kJ, or approximately 24,551 kJ of heat is released.
What mass (grams) of silver oxide would you need to decompose in order to produce 120.6 grams of silver?
Ag2O --> Ag + O2
The mass of silver oxide needed to decompose in order to produce 120.6 grams of silver is 494.5 grams.
The balanced chemical equation for silver oxide breakdown is:
[tex]Ag_2O[/tex] → [tex]2 Ag[/tex] + [tex]1/2 O_2[/tex]
The equation shows that for every mole of silver oxide that decomposes, two moles of silver are created, and the molar mass of [tex]Ag_2O[/tex] is 231.74 g/mol.
Hence, using stoichiometry, we can calculate the quantity of silver oxide necessary to generate 120.6 grams of silver:
120.6 g Ag × (1 mol Ag / 107.87 g Ag) × (1 mol [tex]Ag_2O[/tex]/ 2 mol Ag) × (231.74 g [tex]Ag_2O[/tex] / 1 mol [tex]Ag_2O[/tex] )
= 494.5 g [tex]Ag_2O[/tex]
As a result, 494.5 grams of silver oxide is needed to decompose in order to produce 120.6 grams of silver.
For more such questions on silver oxide, click on:
https://brainly.com/question/27241605
#SPJ11
An argon ion laser emits visible radiation with photons of energy 4.071 x 10-19 J. What is the
wavelength of the radiation?
The wavelength of the radiation emitted by the argon ion laser is [tex]4.854 * 10^-7 m[/tex].
Wavelength is a property of any type of wave that refers to the distance between two adjacent points on the wave that is in phase, i.e., at the same point in their respective cycles. It is usually denoted by the Greek letter lambda (λ) and is measured in units of length, such as meters or nanometers.
The energy carried by the photon (E) is related to the wavelength ([tex]\lambda[/tex]) through the following equation:
[tex]E=hc/\lambda[/tex]; where 'h' is the Plank's Constant and 'c' is the speed of light which is [tex]3* 10^{-7} m/s[/tex].
We can say that
[tex]\lambda - hc/E[/tex]
Now after substituting the given values, we get:
[tex]\lambda = (6.626 * 10^{-34} J.s * 3.00 * 10^8 m/s) / (4.071 * 10^{-19} J)\\\lambda = 4.854 * 10^-7 m[/tex]
Therefore the wavelength of the radiation emitted by the argon ion laser is [tex]4.854 * 10^-7 m[/tex].
Learn more about the Plank's Constant at:
https://brainly.com/question/28060145
#SPJ4
How is oil soap and water sustainable
Oil soap and water are sustainable because they are both natural and biodegradable.
What is oil soap?Oil soap is a cleaning product that is made from natural materials, such as vegetable oils and potassium hydroxide.
One of the main ways in which oil soap and water can be considered sustainable is that they are both natural and biodegradable.
In addition, using oil soap and water to clean wooden surfaces can help to prolong their lifespan, reducing the need for frequent replacements and minimizing waste.
Regular maintenance with oil soap can help to prevent dirt and grime buildup that can cause damage to wooden surfaces.
Learn more about oil soap here: https://brainly.com/question/16375181
#SPJ1
N
01H
H
The property of water shown allows it to-
A freeze faster than it boils due to sharing metallic bonds
B. support floating objects due to forces between covalent bonds
C remain stable due to electrons forming ionic bonds
D. be both cohesive and adhesive due to hydrogen bonds
Answer:
D
Explanation:
The special property of water is that it is able to be cohesive and adhesive due to their hydrogen bonds
A chemistry teacher has 6 liters of a
sodium nitrate solution. She has 24
students in her class and she wants
to divide the solution evenly among
them. How many milliliters of sodium
nitrate solution will each student
receive?
Answer:
There are 1000 milliliters (ml) in one liter. Therefore, the teacher has a total of 6 x 1000 = 6000 ml of sodium nitrate solution.
Explanation:
To divide the solution evenly among the 24 students, we need to divide the total volume of the solution by the number of students:
6000 ml ÷ 24 students = 250 ml per student
Therefore, each student will receive 250 milliliters of sodium nitrate solution.
Answer:
Answer- 0.25ml
Explanation:
So there are 24 students and 6 liters of Solution.So to evenly distribute
Just divide 6 by 24(6÷24/)... So the answer will be 0.25
2C8H18(l)+25O2(g)⟶16CO2(g)+18H2O(l)
If 538 mol
of octane combusts, what volume of carbon dioxide is produced at 31.0 ∘C
and 0.995 atm?
The volume of the carbon dioxide is produced at the 31.0 °C and the 0.995 atm is 119,786 L.
The number of moles of octane = 538 mol
The moles of carbon dioxide = 4888 mol
The temperature of the gas = 31.0 °C
The pressure of the gas = 0.995 atm
The volume of the gas = ?
The ideal gas equation is :
P V = n R T
Where,
The p is the pressure = 0.995 atm
The V is the volume = ?
The n is moles of gas = 4888 mol
The R is gas constant = 0.823 atm L / mol K
The T is temperature = 31 + 273 = 304 K
V = n R T / P
V = ( 4888 mol × 0.0823 × 304 ) / 0.995
V = 119,786 L
The volume is 119,786 L.
To learn more about volume here
https://brainly.com/question/29813393
#SPJ1
Based on the solubility rules, which one of these phosphate compounds is insoluble in water?
A) Li2CO3
B) Na3PO4
C) Ba(OH)2
D) (NH4)3PO4
(NH4)3PO4 is insoluble in water. The correct option is D
What is solubility rules ?According to their chemical formula and ionic charges, ionic compounds generally follow a set of solubility laws that define their solubility patterns in water. These guidelines aid in determining whether an ionic compound will dissolve in water or not as well as if it will precipitate when combined with other ionic compounds.
Therefore, (NH4)3PO4 is the compound that is expected to be insoluble in water based on the solubility rules.
Learn more about solubility rules here : brainly.com/question/15596863
#SPJ1
What is the equilibrium constant, K? 3 A(g) + 3 B(g) <-> 5 C(g) + 2 D(g)
The equilibrium constant is written as;
Keq = [tex][D]^2 [C]^5/[A] [B]^3[/tex]
What is the equilibrium constant?The equilibrium constant's value is influenced by the reaction's chemical make-up and temperature.
The product of the product concentrations, each raised to the power of their stoichiometric coefficient, divided by the product of the reactant concentrations, each raised to the power of their stoichiometric coefficient, is known as the equilibrium constant.
The equilibrium constant is Keq = [tex][D]^2 [C]^5/[A] [B]^3.[/tex]
Learn more about equilibrium constant: https://brainly.com/question/10038290
#SPJ1
Perform the conversions between energy units.
6.61 x 10^6 J = ___kcal. My initial answer was 6610 but it was wrong can someone show me how to get the correct answer
After considering the given data and performing the evaluation regarding the convertion of energy units the answer derived is 6.61 x 10⁶ J = 1577.16 kcal.
In order to alter joules (J) to kilocalories (kcal), the below conversion can be applied.
1 kcal = 4.184 kJ.
We start by, converting J to kJ by dividing by 1000:
6.61 x 10⁶ J = 6.61 x 10³ kJ
Next step we convert kJ to kcal by dividing by 4.184:
= 6.61 x 10³ kJ ÷ 4.184
= 1577.16 kcal (rounded to five significant figures)
1 joule (J) is the amount of energy needed to apply a force of 1 newton (N) over a distance of 1 meter (m).
1 kilocalorie (kcal), on the other hand, is described as the amount of energy required to increase the temperature of 1 kilogram (kg) of water by 1 degree Celsius (°C), which is equal to 4184 joules (J).
To learn more about kilocalorie
https://brainly.com/question/30763955
#SPJ1
What happens to the particles of a gad when the gas is compressed
Answer:
When the gas is compressed, its molecules come closer and internal energy of gas is increased and the number of collisions will also increase. As the gas is compressed, the work done on it shows up as increased internal energy, which must be transferred to the surroundings to keep the temperature constant.
After writing the correct formulas for the reactants and products, the equation is balanced by a. adjusting subscripts to the formula(s). b. adjusting coefficients to the smallest whole-number ratio. c. changing the products formed. d. making the number of reactants equal to the number of products.
After writing the correct formulas for the reactants and products, the equation is balanced by adjusting coefficients to the smallest whole-number ratio. The correct answer is option b.
Adjusting the coefficients to the smallest whole-number ratio is the process of balancing a chemical equation. Balancing the equation means that the number of atoms of each element on the reactant side must equal the number of atoms of each element on the product side.
The coefficients in front of the formulas of the reactants and products are used to balance the equation. By adjusting the coefficients, you can make sure that the number of atoms of each element is balanced on both sides of the equation. Therefore option b is correct
For more such questions on reactants, click on:
https://brainly.com/question/26283409
#SPJ11
Which of the following statements confirms the law of conservation of energy?
Statement that shows that the total energy of a system remains constant and is conserved would confirm the law of conservation of energy.
What is law of conservation?
The law of conservation of energy states that energy cannot be created or destroyed, only transformed from one form to another. Therefore, any statement that shows that the total energy of a system remains constant and is conserved would confirm the law of conservation of energy.
Here are some examples of statements that confirm the law of conservation of energy:
The total energy of a closed system, such as a roller coaster, remains constant as the coaster moves from one point to another. Even though the potential energy of the coaster decreases as it goes downhill and the kinetic energy increases, the total energy of the coaster (potential plus kinetic) remains constant.When a pendulum swings back and forth, the potential energy is converted into kinetic energy and back again, but the total energy of the pendulum remains constant.In a chemical reaction, the total energy of the reactants is equal to the total energy of the products. Although energy can be released or absorbed during the reaction, the total energy of the system is conserved.When a ball is thrown into the air, it gains potential energy as it rises and loses potential energy as it falls back down. However, the total energy of the ball (potential plus kinetic) remains constant, neglecting air resistance.All of these statements confirm the law of conservation of energy by showing that the total energy of a system is conserved over time.
To know more about energy, visit:
https://brainly.com/question/1859083
#SPJ9
Complete question is: "The total energy of a system remains constant and is conserved" statement would confirm the law of conservation of energy.
Hellpppp with this question!!! THE ANSWER IS NOT 0.3 or 0.5
the answer is 2.5 according to me
For the Li2 molecule, rank order the following orbitals from lowest to highest energy: 1s, 2s, σ2s, σ*2s
The order of the energy levels for the Li2 molecule is:
1s < σ2s < 2s < σ*2s
The 1s orbital is the lowest in energy because it is closest to the nucleus and has the highest electron density. The σ2s orbital is next in energy because it is a bonding orbital that is formed by the overlap of two atomic 2s orbitals. The 2s orbital is higher in energy than the σ2s orbital because it is an atomic orbital that has not participated in bonding. The σ*2s orbital is the highest in energy because it is an antibonding orbital that weakens the bond between the two Li atoms.
To know more about energy levels, here
brainly.com/question/29736874
#SPJ1
