The value of the phase constant, φ is 0
Graph of x(t)Using the graph, we can see that the equation for the position function x(t) = A sin (ωt + φ) is as follows;
x(t) = A sin (ωt + φ) ....... (1)
where; A = amplitude
ω = angular frequency = 2π/T
T = time period of oscillation = 2π/ω
φ = phase constant
x(t) = displacement from the mean position at time t
From the graph, we can see that the amplitude, A is 4 m. Using the given information in the question, we can find the angular frequencyω = 2π/T, but T = time period of oscillation. We can get the time period of oscillation, T from the graph. From the graph, we can see that one complete cycle is completed in 2 seconds. Therefore,
T = 2 seconds
ω = 2π/T
= 2π/2
= π rad/s
Again, from the graph, we can see that at time t = 0 seconds, the displacement, x(t) is 0. This means that φ = 0. Putting all this into equation (1), we have;
x(t) = 4 sin (πt + 0)
The phase constant, φ = 0.
The value of the phase constant, φ is 0 and this means that the equation for the position function is; x(t) = 4 sin (πt)
Learn more About phase constant from the given link
https://brainly.com/question/31497779
#SPJ11
A disk of mass M and radius R has a surface density o=ar, where r is the radial distance from the disk's center. What is the moment of inertia of this disk (in terms of M and R) for an axis that is perpendicular to the disk through the center of mass?
Therefore, the moment of inertia of this disk (in terms of M and R) for an axis that is perpendicular to the disk through the center of mass is 3/2 * M * R².
We know that the surface density is given as;
o=ar
Where;
o is surface density
a is constant
r is radial distance from the disk's center
The mass of the disk is given as M.
The radius of the disk is given as R.
The moment of inertia of this disk (in terms of M and R) for an axis that is perpendicular to the disk through the center of mass is given as;
I=∫r²dm
Here,
dm=o*rdA.
Also, the expression for moment of inertia for a thin disk is given as;
I=1/2*M*R²
Putting the value of o=ar in dm=o*rdA, we get;
dm=ar*dA
Again,
dA=2πrdr
So,
dm=2πar²dr
Putting the value of dm in I=∫r²dm and integrating, we get;
I=2πaM/R * ∫R₀r³dr
Here, R₀ is the radius at the center of the disk and r is the radius of the disk.
I=2πaM/R * [(R³/3)-(R₀³/3)]
Putting the value of a=3M/2πR³ in I=2πaM/R * [(R³/3)-(R₀³/3)], we get;
I=3/2 * M * R²
Note: The calculation above is valid for a disk with the given density profile. In general, the moment of inertia of a disk depends on the mass distribution and the axis of rotation.
to know more about law of inertia visit:
https://brainly.com/question/1830739
#SPJ11
quantum physics question please help \
Question 2 Consider a crystal in 3 dimensions, in which each unit cell contributes Zvalence electrons and there are N unit cells (ons) per band. Which of the following is true? O For Zodd, the crystal
For Z odd, the crystal will have partially filled bands. This is a characteristic of crystals with an odd number of valence electrons and has implications for the electronic properties of the crystal.
In a crystal, the valence electrons determine the electronic properties and behavior. The number of valence electrons contributed by each unit cell is denoted by Zvalence. Additionally, the crystal consists of N unit cells.
When Zvalence is odd, it means that there is an odd number of valence electrons contributed by each unit cell. In this case, the bands in the crystal will be partially filled. This is because for each band, there are two possible spin states for each electron (spin up and spin down). With an odd number of electrons, one spin state will be occupied by an electron, while the other spin state will remain unoccupied, resulting in partially filled bands.
For a crystal with Z odd, the bands will be partially filled due to the odd number of valence electrons contributed by each unit cell. This is a characteristic of crystals with an odd number of valence electrons and has implications for the electronic properties of the crystal.
To know more about crystal visit:
https://brainly.com/question/1325088
#SPJ11
What is the maximum kinetic energy (in eV) of the photoelectrons when light of wavelength 400 nm falls on the surface of calcium metal with binding energy (work function) 2.71 eV? (15 pts.)
The maximum kinetic energy (KEmax) of photoelectrons can be calculated using the equation:
KEmax = energy of incident photons - work function
First, we need to calculate the energy of the incident photons using the equation:
energy = (Planck's constant × speed of light) / wavelength
Given that the wavelength (λ) of the incident light is 400 nm, we convert it to meters (1 nm = 10^(-9) m) and substitute the values into the equation:
energy = (6.626 × 10^(-34) J·s × 3 × 10^8 m/s) / (400 × 10^(-9) m)
This gives us the energy of the incident photons. To convert this energy to electron volts (eV), we divide it by the elementary charge (1 eV = 1.6 × 10^(-19) J):
energy (in eV) = energy (in J) / (1.6 × 10^(-19) J/eV)
Now, we can calculate the maximum kinetic energy:
KEmax = energy (in eV) - work function
Substituting the given work function of calcium (2.71 eV) into the equation, we can determine the maximum kinetic energy of the photoelectrons.
To know more about kinetic energy, please visit
https://brainly.com/question/999862
#SPJ11
pls help
A +2.0 microCoulomb charge and a -5.0 microCoulomb charge are separated by a distance of 9.0 cm. Please find the size of the force that the -5.0 microCoulomb charge experiences.
An object with a char
The force that the -5.0 microCoulomb charge encounters is around [tex]1.11 * 10^7[/tex] Newtons in size.
For finding the size of the force between two charges, you can use Coulomb's Law, which states that the force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, Coulomb's Law is expressed as:
F = k * (|q1| * |q2|) / r^2
Where:
F is the magnitude of the electrostatic force,
k is Coulomb's constant (k = [tex]8.99 * 10^9 Nm^2/C^2[/tex]),
|q1| and |q2| are the magnitudes of the charges, and
r is the distance between the charges.
In this case, we have a +2.0 microCoulomb charge (2.0 μC) and a -5.0 microCoulomb charge (-5.0 μC), separated by a distance of 9.0 cm (0.09 m). Let's calculate the force experienced by the -5.0 microCoulomb charge:
|q1| = 2.0 μC
|q2| = -5.0 μC (Note: The magnitude of a negative charge is the same as its positive counterpart.)
r = 0.09 m
Plugging these values into Coulomb's Law, we get:
F = [tex](8.99 * 10^9 Nm^2/C^2) * ((2.0 * 10^{-6} C) * (5.0 * 10^{-6} C)) / (0.09 m)^2[/tex]
Calculating this expression:
F [tex](8.99 * 10^9 Nm^2/C^2) * (10^-5 C^2) / (0.09^2 m^2)\\\\ = (8.99 * 10^9 N * 10^{-5}) / (0.09^2 m^2)\\\\ = (8.99 x 10^4 N) / (0.0081 m^2)[/tex]
= [tex]1.11 * 10^7[/tex] N
Therefore, the size of the force that the -5.0 microCoulomb charge experiences is approximately [tex]1.11 * 10^7[/tex] Newtons.
To know more about Coulomb's Law and electrostatics refer here:
https://brainly.com/question/30407638?#
#SPJ11
Gas A is monatomic, and Gas B is diatomic. Equal moles of the two gasses are initially at the same temperature,pressure, and volume. Both gasses are then heated at constant volume to the same higher temperature. Which one of the following will not be true when both gases reach the final higher temperature?
When both gases reach the final higher temperature after being heated at constant volume, the following statement will not be true, the two gases will have the same pressure. When heated at constant volume, the gases experience an increase in temperature.
In the scenario described, both gases start with equal moles, the same initial temperature, pressure, and volume. When heated at constant volume, the gases experience an increase in temperature. However, the nature of the gases (monatomic vs. diatomic) affects how they respond to the increase in temperature.
For an ideal gas, the pressure is directly proportional to the temperature, given that the volume and number of moles are constant (as in this case). However, the factor that affects this relationship is the degree of freedom of the gas molecules.
In the case of a monatomic gas (Gas A), it has three degrees of freedom, meaning it can store energy in three independent translational motion modes. As the gas is heated, the increase in temperature directly translates to an increase in the kinetic energy of the gas molecules, resulting in an increase in their average speed. This increase in speed leads to more frequent and forceful collisions with the container walls, thus increasing the pressure of the gas.
On the other hand, a diatomic gas (Gas B) has five degrees of freedom: three for translational motion and two additional degrees of freedom for rotational motion. As the diatomic gas is heated, the increase in temperature not only increases the translational kinetic energy but also the rotational kinetic energy. This increase in rotational energy distributes some of the increased kinetic energy among the rotational modes, resulting in a smaller increase in the average translational speed compared to the monatomic gas. Consequently, the pressure increase of the diatomic gas will be less compared to the monatomic gas at the same final temperature.
Therefore, when both gases reach the final higher temperature, the statement "The two gases will have the same pressure" will not be true. The diatomic gas (Gas B) will have a lower pressure compared to the monatomic gas (Gas A) at the same temperature.
Learn more about temperature here:
https://brainly.com/question/30775264
#SPJ11
3. A proton is located at A, 1.0 m from a fixed +2.2 x 10-6 C charge. The electric field is 1977.8 N/C across A [5 marks total] to B. B proton 2.2x10-6 C +1.0 m -10m a) What is the change in potential energy of the proton as it moves from A to B? [2] b) If the proton started from rest at A, what would be its speed at B? [
a) The change in potential energy of the proton as it moves from A to B is 2.424 × 10⁻¹⁵ J ; b) The speed of the proton at B is 1.75 × 10⁵ m/s.
a) At point A, the proton is located at a distance of 1 meter from the fixed +2.2 x 10⁻⁶ C charge.
Therefore, the electric field vector at A is:
E = kq/r² = (9 × 10⁹ N·m²/C²)(2.2 × 10⁻⁶ C)/(1 m)²
= 1.98 × 10³ N/C
The potential difference between points A and B is:
∆V = Vb − Va
= − [tex]∫a^b E · ds[/tex]
[tex]= − E ∫a^b ds[/tex]
= − E (b − a)
= − (1977.8 N/C)(10 m − 1 m)
= − 17780.2 V
The change in potential energy of the proton as it moves from A to B is:
ΔU = q∆V = (1.6 × 10⁻¹⁹ C)(− 17780.2 V)
= − 2.424 × 10⁻¹⁵ J
b) The potential energy of the proton at B is:
U = kqQ/r
= (9 × 10⁹ N·m²/C²)(2.2 × 10⁻⁶ C)(1.6 × 10⁻¹⁹ C)/(10 m)
= 3.168 × 10⁻¹⁴ J
The total mechanical energy of the proton at B is:
E = K + U = 3.168 × 10⁻¹⁴ J + 2.424 × 10⁻¹⁵ J kinetic
= 3.41 × 10⁻¹⁴ J
The speed of the proton at B can be calculated by equating its kinetic energy to the difference between its total mechanical energy and its potential energy:
K = E − U
= (1/2)mv²v
= √(2K/m)
The mass of a proton is 1.67 × 10⁻²⁷ kg, so we can substitute the values into the equation:
v = √(2K/m)
= √(2(3.41 × 10⁻¹⁴ J − 3.168 × 10⁻¹⁴ J)/(1.67 × 10⁻²⁷ kg))
= 1.75 × 10⁵ m/s
Therefore, the speed of the proton at B is 1.75 × 10⁵ m/s.
So, a) Change in potential energy of the proton as it moves from A to B is 2.424 × 10⁻¹⁵ J ; b) Speed of the proton at B is 1.75 × 10⁵ m/s.
To know more about potential energy, refer
https://brainly.com/question/21175118
#SPJ11
(20 pts) The chemical reaction for the formation of ammonia, NH3, from its elements at 25°C is: N₂(g) + 3H₂(g) → 2NH, (g), AG (25°C) = -32.90 kJ (a) What is the equilibrium constant for the reaction at 25 °C ? (b) What is the AG for the reaction at 35 °C, if all species have partial pressure of 0.5 atm. Assume that the standard enthalpy of the above reaction, AH° = -92.66 kJ, is constant in this temperature range.
a) The equilibrium constant for the formation of ammonia at 25 °C is approximately 3.11 x 10^-4.
The equilibrium constant (K) is a measure of the extent to which a reaction reaches equilibrium. It is defined as the ratio of the product concentrations to the reactant concentrations, with each concentration raised to the power of its stoichiometric coefficient in the balanced equation.
For the reaction N₂(g) + 3H₂(g) → 2NH₃(g), the equilibrium constant expression is:
K = [NH₃]² / [N₂][H₂]³
The value of K can be calculated using the given information. Since the reaction is exothermic (ΔH° = -92.66 kJ), a decrease in temperature will favor the formation of ammonia. Therefore, at 25 °C, the value of K will be less than 1.
Using the relationship between ΔG° and K, which states that ΔG° = -RT ln(K), where R is the gas constant and T is the temperature in Kelvin, we can calculate ΔG°:
ΔG° = -RT ln(K)
-32.90 kJ = -(8.314 J/mol·K)(25 + 273) ln(K)
Solving for ln(K):
ln(K) = -32.90 kJ / [(8.314 J/mol·K)(298 K)]
ln(K) ≈ -0.0158
Taking the exponent of both sides to find K:
[tex]K ≈ e^(^-^0^.^0^1^5^8^)[/tex]
K ≈ 3.11 x 10^-4
Therefore, the equilibrium constant for the reaction at 25 °C is approximately 3.11 x 10^-4.
b) The ΔG for the reaction at 35 °C, with all species having a partial pressure of 0.5 atm, can be calculated as approximately -33.72 kJ.
To calculate ΔG at 35 °C, we can use the equation:
ΔG = ΔG° + RT ln(Q)
Where ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.
At equilibrium, Q = K, so ΔG = 0. Since the partial pressures are given, we can calculate Q:
Q = [NH₃]² / [N₂][H₂]³
Assuming the partial pressures of all species are 0.5 atm, we have:
Q = (0.5)² / (0.5)(0.5)³ = 1
Now we can calculate ΔG at 35 °C:
ΔG = ΔG° + RT ln(Q)
ΔG = -32.90 kJ + (8.314 J/mol·K)(35 + 273) ln(1)
ΔG ≈ -33.72 kJ
Therefore, the ΔG for the reaction at 35 °C, with all species having a partial pressure of 0.5 atm, is approximately -33.72 kJ.
Learn more about equilibrium constant
brainly.com/question/29809185
#SPJ11
Acircular loop of 10m diameter carries 2A current. Find the magnetic field strength at a distance of 20m along the axis of the loop. Also find the magnetic flux density in the plane of the loop as a function of distance from the center of the loop.
The magnetic flux density in the plane of the loop as a function of distance from the center is (4π × 10^-7 T·m) / ((25m² + x²)^(3/2)).
To find the magnetic field strength at a distance of 20m along the axis of the loop, we can use the formula for the magnetic field produced by a current-carrying loop at its center:
B = (μ₀ * I * N) / (2 * R),
where B is the magnetic field strength, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), I is the current, N is the number of turns in the loop, and R is the radius of the loop.
Since the diameter of the loop is 10m, the radius is half of that, R = 5m. The current is given as 2A, and there is only one turn in this case, so N = 1.
Substituting these values into the formula, we have:
B = (4π × 10^-7 T·m/A * 2A * 1) / (2 * 5m) = (2π × 10^-7 T·m) / (5m) = 4π × 10^-8 T.
Therefore, the magnetic field strength at a distance of 20m along the axis of the loop is 4π × 10^-8 Tesla.
To find the magnetic flux density in the plane of the loop as a function of distance from the center, we can use the formula for the magnetic field produced by a current-carrying loop at a point on its axis:
B = (μ₀ * I * R²) / (2 * (R² + x²)^(3/2)),
where x is the distance from the center of the loop along the axis.
Substituting the given values, with R = 5m, I = 2A, and μ₀ = 4π × 10^-7 T·m/A, we have:
B = (4π × 10^-7 T·m/A * 2A * (5m)²) / (2 * ((5m)² + x²)^(3/2)).
Simplifying the equation, we find:
B = (4π × 10^-7 T·m) / ((25m² + x²)^(3/2)).
Therefore, The magnetic flux density in the plane of the loop as a function of distance from the center is (4π × 10^-7 T·m) / ((25m² + x²)^(3/2)).
Learn more about magnetic flux density here:
https://brainly.com/question/16234377
#SPJ11
A concave mirror has a radius of curvature of 33.6 What is its focal length? Express your answer in centimeters.
A ladybug 745 mm tall is located 21.4 cm from this mirror along the principal axis. Find the location of the image of the Insect Express your answer in centimeters to three significant figures. Find the height of the image of the insect Express your answer in millimeters to three significant figures.
If the mirror is immersed in water (of refractive index 1.33), what is its focal length Express your answer in centimeters
Radius of curvature of the mirror, R = 33.6 cm Height of the ladybug, h = 745 mm = 74.5 cm Distance of the ladybug from the mirror, u = 21.4 cm Refraction index of water, μ = 1.33
(a)The formula to find the focal length of a concave mirror is: f = R/2 Where f is the focal length and R is the radius of curvature of the mirror.
Substituting the given values of R in the above formula, f = 33.6/2f = 16.8 cm
Hence, the focal length of the mirror is 16.8 cm.
(b)We know that the mirror formula is given by: 1/v + 1/u = 1/f Where v is the distance of the image from the mirror.
As the object is placed beyond the center of curvature of the mirror, u is positive.
Substituting the given values in the above formula, 1/v + 1/21.4 = 1/-16.8
Simplifying, we get, v = -9.16 cm
The negative sign indicates that the image formed is virtual and erect. The distance of the image from the mirror is 9.16 cm.
(c)Using the magnification formula, we get: m = -v/u Where m is the magnification of the image.
Substituting the given values in the above formula, we get: m = -9.16/21.4m = -0.428
The negative sign indicates that the image formed is inverted and erect.
Using the formula for magnification, we get: m = h'/h Where h' is the height of the image. Substituting the given values in the above formula, we get: -0.428 = h'/74.5
Simplifying, we get, h' = -31.8 mm The negative sign indicates that the image formed is inverted.
The height of the image is 31.8 mm.
(d)The formula to find the focal length of a lens immersed in a liquid of refractive index μ is: f' = f/(μ - 1) Where f is the focal length of the lens in air and f' is the focal length of the lens in the liquid.
Substituting the given values in the above formula, we get: f' = 16.8/(1.33 - 1) Simplifying, we get, f' = 33.6 cm
Hence, the focal length of the mirror when immersed in water is 33.6 cm.
Learn more about a curved mirror here: https://brainly.com/question/9757866
#SPJ11
6. [-/1 Points] DETAILS SERPSE10 7.4.OP.010. At an archery event, a woman draws the string of her bow back 0.392 m with a force that increases steadily from 0 to 215 N. (a) What is the equivalent spring constant (in N/m) of the bow? N/m (b) How much work (in 3) does the archer do on the string in drawing the bow? 3. Need Help? Read It
The question asks for the equivalent spring constant of a bow and the amount of work done by an archer in drawing the bow. The woman draws the string of the bow back 0.392 m with a steadily increasing force from 0 to 215 N.
To determine the equivalent spring constant of the bow (a), we can use Hooke's Law, which states that the force exerted by a spring is directly proportional to its displacement. In this case, the displacement of the bowstring is given as 0.392 m, and the force increases steadily from 0 to 215 N. Therefore, we can calculate the spring constant using the formula: spring constant = force / displacement. Substituting the values, we have: spring constant = 215 N / 0.392 m = 548.47 N/m.
To calculate the work done by the archer on the string (b), we can use the formula: work = force × displacement. The force applied by the archer steadily increases from 0 to 215 N, and the displacement of the bowstring is given as 0.392 m. Substituting the values, we have: work = 215 N × 0.392 m = 84.28 J (joules). Therefore, the archer does 84.28 joules of work on the string in drawing the bow.
Learn more about Equivalent Spring constant:
https://brainly.com/question/30039564
#SPJ11
A parallel plate capacitor is charged to a potential of 3000 V and then isolated. Find the magnitude of the charge on the positive plate if the plates area is 0.40 m2 and the diſtance between the plate
The magnitude of the charge on the positive plate if the plates area is 0.40 m² and the diſtance between the plate is 0.0126 C.
The formula for the capacitance of a parallel plate capacitor is
C = εA/d
Where,C = capacitance,
ε = permittivity of free space,
A = area of plates,d = distance between plates.
We can use this formula to find the capacitance of the parallel plate capacitor and then use the formula Q = CV to find the magnitude of the charge on the positive plate.
potential, V = 3000 V
area of plates, A = 0.40 m²
distance between plates, d = ?
We need to find the magnitude of the charge on the positive plate.
Let's start by finding the distance between the plates from the formula,
C = εA/d
=> d = εA/C
where, ε = permittivity of free space
= 8.85 x 10⁻¹² F/m²
C = capacitance
A = area of plates
d = distance between plates
d = εA/Cd
= (8.85 x 10⁻¹² F/m²) × (0.40 m²) / C
Now we know that Q = CV
So, Q = C × V
= 3000 × C
Q = 3000 × C
= 3000 × εA/d
= (3000 × 8.85 x 10⁻¹² F/m² × 0.40 m²) / C
Q = (3000 × 8.85 x 10⁻¹² × 0.40) / [(8.85 x 10⁻¹² × 0.40) / C]
Q = (3000 × 8.85 x 10⁻¹² × 0.40 × C) / (8.85 x 10⁻¹² × 0.40)
Q = 0.0126 C
The magnitude of the charge on the positive plate is 0.0126 C.
Learn more about capacitor :
brainly.com/question/30614136
#SPJ11
Question 14 It is possible to wholly convert a given amount of heat energy into mechanical energy True False
It is possible to wholly convert a given amount of heat energy into mechanical energy is False. There are many ways of converting energy into mechanical work such as steam engines, gas turbines, electric motors, and many more.
It is not possible to wholly convert a given amount of heat energy into mechanical energy because of the laws of thermodynamics. The laws of thermodynamics state that the total amount of energy in a system is constant and cannot be created or destroyed, only transferred from one form to another.
Therefore, when heat energy is converted into mechanical energy, some of the energy will always be lost as waste heat. This means that it is impossible to convert all of the heat energy into mechanical energy. In practical terms, the efficiency of the conversion of heat energy into mechanical energy is limited by the efficiency of the conversion process.
To know more about mechanical visit:
https://brainly.com/question/20885658
#SPJ11
(14.9) Atom 1 of mass 38.5 u and atom 2 of mass 40.5 u are both singly ionized with a charge of +e. After being introduced into a mass spectrometer (see the figure below) and accelerated from rest through a potential difference V = 8.09 kV, each ion follows a circular path in a uniform magnetic field of magnitude B = 0.680 T. What is the distance Δx between the points where the ions strike the detector?
The distance Δx between the points where the ions strike the detector is 0.0971 meters. In a mass spectrometer, ions are accelerated by a potential difference and then move in a circular path due to the presence of a magnetic field.
To solve this problem, we can use the equation for the radius of the circular path:
r = (m*v) / (|q| * B)
where m is the mass of the ion, v is its velocity, |q| is the magnitude of the charge, and B is the magnetic field strength. Since the ions are accelerated from rest, we can use the equation for the kinetic energy to find their velocity:
KE = q * V
where KE is the kinetic energy, q is the charge, and V is the potential difference.
Once we have the radius, we can calculate the distance Δx between the two points where the ions strike the detector. Since the ions follow circular paths with the same radius, the distance between the two points is equal to the circumference of the circle, which is given by:
Δx = 2 * π * r
By substituting the given values into the equations and performing the calculations, we find that Δx is approximately 0.0971 meters.
To learn more about distance click here brainly.com/question/31713805
#SPJ11
3. (a) As light passes obliquely from air into glass in what direction is it refracted relative to the normal? (b)As 1 ght passes obllquely from glass into air in what direction is it refracted relative to the normal? (c) Is light refracted as it passes along a normal from air into glass? (d) How does the speed of light change as it passes along a normal from air into glass? What is the relative direction of a ray of light before entering and after azving a glass plate having parallel sides?
(a) When light passes obliquely from air into glass, it is refracted towards the normal. The angle of refraction is smaller than the angle of incidence.
Refraction is the bending of light as it passes from one medium to another with a different refractive index. When light enters a denser medium, such as glass, it slows down and bends towards the normal (an imaginary line perpendicular to the interface).
(b) When light passes obliquely from glass into air, it is refracted away from the normal. The angle of refraction is greater than the angle of incidence.
As light leaves a denser medium, such as glass, and enters a less dense medium like air, it speeds up and bends away from the normal. Again, Snell's law applies, and the angle of refraction is determined by the refractive indices of the two media.
(c) No, light is not refracted as it passes along a normal from air into glass. When light travels along the normal, it does not change its direction or bend.
Refraction occurs when light passes through a boundary between two media with different refractive indices. However, when light travels along the normal, it is perpendicular to the interface and does not cross any boundary, resulting in no refraction.
(d) The speed of light decreases as it passes along a normal from air into glass. Glass has a higher refractive index than air, which means light travels slower in glass than in air.
The speed of light in a medium depends on its refractive index. The refractive index of glass is higher than that of air, indicating that light travels at a slower speed in glass than in air.
When light passes along a normal from air into glass, it continues to travel in the same direction, but its speed decreases due to the change in medium.
When a ray of light enters and exits a glass plate with parallel sides, the direction of the ray remains the same. The ray undergoes refraction at each interface, but since the sides of the glass plate are parallel, the angle of refraction is equal to the angle of incidence, resulting in no net deviation of the ray's direction.
To learn more about light click here brainly.com/question/29994598
#SPJ11
Water flows straight down from an open faucet. The cross-sectional area of the faucet is 2.5 x 10^4m^2 and the speed of the water is
0.50 m/s as it leaves the faucet. Ignoring air resistance, find the cross-sectional area of the water stream at a point 0.10 m below the
manical
The cross-sectional area of the water stream at a point 0.10m in A2 = (2.5 x 10^(-4) m²)(0.50 m/s) / v2
Since the velocity at that point is not given, we cannot determine the exact cross-sectional area of the water stream at a point 0.10 m below the faucet without additional information about the velocity at that specific location.
To solve this problem, we can apply the principle of conservation of mass, which states that the mass flow rate of a fluid remains constant in a continuous flow.
The mass flow rate (m_dot) is given by the product of the density (ρ) of the fluid, the cross-sectional area (A) of the flow, and the velocity (v) of the flow:
m_dot = ρAv
Since the water is incompressible, its density remains constant. We can assume the density of water to be approximately 1000 kg/m³.
At the faucet, the cross-sectional area (A1) is given as 2.5 x 10^(-4) m² and the velocity (v1) is 0.50 m/s.
At a point 0.10 m below the faucet, the velocity (v2) is unknown, and we need to find the corresponding cross-sectional area (A2).
Using the conservation of mass, we can set up the following equation:
A1v1 = A2v2
Substituting the known values, we get:
(2.5 x 10^(-4) m²)(0.50 m/s) = A2v2
To solve for A2, we divide both sides by v2:
A2 = (2.5 x 10^(-4) m²)(0.50 m/s) / v2
Since the velocity at that point is not given, we cannot determine the exact cross-sectional area of the water stream at a point 0.10 m below the faucet without additional information about the velocity at that specific location.
Learn more about velocity:
https://brainly.com/question/80295
#SPJ11
Explain the ultraviolet catastrophe and Planck's solution. Use
diagrams in your explanation.
The first indication that energy is not continuous, and it paved the way for the development of quantum mechanics.
The ultraviolet catastrophe is a problem in classical physics that arises when trying to calculate the spectrum of electromagnetic radiation emitted by a blackbody. A blackbody is an object that absorbs all radiation that hits it, and it emits radiation with a characteristic spectrum that depends only on its temperature.
According to classical physics, the energy of an electromagnetic wave can be any value, and the spectrum of radiation emitted by a blackbody should therefore be continuous. However, when this prediction is calculated, it is found that the intensity of the radiation at high frequencies (short wavelengths) becomes infinite. This is known as the ultraviolet catastrophe.
Planck's solution to the ultraviolet catastrophe was to postulate that energy is quantized, meaning that it can only exist in discrete units. This was a radical departure from classical physics, but it was necessary to explain the observed spectrum of blackbody radiation. Planck's law, which is based on this assumption, accurately predicts the spectrum of radiation emitted by blackbodies.
The graph on the left shows the classical prediction for the spectrum of radiation emitted by a blackbody.
As you can see, the intensity of the radiation increases without bound as the frequency increases. The graph on the right shows the spectrum of radiation predicted by Planck's law. As you can see, the intensity of the radiation peaks at a certain frequency and then decreases as the frequency increases. This is in agreement with the observed spectrum of blackbody radiation.
Planck's discovery of quantization was a major breakthrough in physics. It was the first indication that energy is not continuous, and it paved the way for the development of quantum mechanics.
Learn more about quantum mechanics with the given link,
https://brainly.com/question/26095165
#SPJ11
The gauge pressure in a certain manometer reads 50.12 psi. What is the density (in pound-mass/cubic inch) of the fluid if the height is 49.88 inches? Report your answer in 2 decimal places. From the previous question, if the atmospheric pressure is 14.7 psi. What is the absolute pressure in psi? Report your answer in 2 decimal places. Next
From the question above, Gauge pressure, Pg = 50.12 psi
Height, h = 49.88 inches
Density of the fluid, ρ = ?
We can use the relation P = ρgh,
where P is the pressure exerted by the fluid at the bottom of the container and g is the acceleration due to gravity.
By simplifying the above relation, we get:
ρ = P / gh
Substituting the given values, we get:ρ = 50.12 / (49.88 × 0.0361)ρ = 39.64 lbm/in³
If the atmospheric pressure is 14.7 psi and the gauge pressure is 50.12 psi, then the absolute pressure can be calculated as follows:
Absolute pressure = Atmospheric pressure + Gauge pressure= 14.7 psi + 50.12 psi= 64.82 psi
Learn more about the pressure at
https://brainly.com/question/32326195
#SPJ11
(a) One of the moon of Jupitec, named 10, has an orbital radius of 4,22×10 11 m and a period of 1.77 daysi, Assuming the artie is circular, caiculate the mass of Jupitel. (b) The largest moon of Jupiter, named Ganymede, has an orbital radius of 1.07×10 9 m and a period of 7.16 days. Calculate the mass of Jupitar from this data. lig (c) Are your results to parts (a) and (b) consistent?
a) The mass of Jupiter can be calculated as 1.95×10²⁷ kg.
b) The mass of Jupiter can be calculated as 1.89×10²⁷ kg.
c) The results from parts (a) and (b) are consistent.
a) To calculate the mass of Jupiter using the data for moon 10, we can utilize Kepler's third law of planetary motion, which states that the square of the orbital period (T) is proportional to the cube of the orbital radius (R) for objects orbiting the same central body. Using this law, we can set up the equation T² = (4π²/GM)R³, where G is the gravitational constant.
Rearranging the equation to solve for the mass of Jupiter (M), we get M = (4π²R³)/(GT²). Plugging in the values for the orbital radius (4.22×10¹¹ m) and period (1.77 days, converted to seconds), we can calculate the mass of Jupiter as 1.95×10²⁷ kg.
b) Applying the same approach to calculate the mass of Jupiter using data for Ganymede, we can use the equation T² = (4π²/GM)R³. Plugging in the values for the orbital radius (1.07×10⁹ m) and period (7.16 days, converted to seconds), we can calculate the mass of Jupiter as 1.89×10²⁷ kg.
c) Comparing the results from parts (a) and (b), we can see that the masses of Jupiter calculated using the two different moons are consistent, as they are within a similar order of magnitude. This consistency suggests that the calculations are accurate and the values obtained for the mass of Jupiter are reliable.
To know more about Kepler's third law refer here:
https://brainly.com/question/30404084#
#SPJ11
: An airplane whose airspeed is 620 km/h is supposed to fly in a straight path 35.0 North of East. But a steady 95 km/h wind blows from the North. In what direction should the plaire N head ?
The plane should head approximately 10.7° north of east. To find the direction, we have to break down the airspeed vector into its east and north components.
Firstly, we need to break down the airspeed vector into its east and north components.
The angle between the airplane's direction and due east is (90° - 35°) = 55°.
Therefore,
The eastward component of the airplane's airspeed is: (620 km/h) cos 55° = 620 × 0.5736
≈ 355 km/h.
The northward component of the airplane's airspeed is: (620 km/h) sin 55° = 620 × 0.8192
≈ 507 km/h.
Now consider the velocity of the airplane relative to the ground. The plane's velocity relative to the ground is the vector sum of the airplane's airspeed velocity and the velocity of the wind.
Therefore, We have, tan θ = (95 km/h) / (507 km/h)θ
= tan⁻¹ (95/507)θ
≈ 10.7°.T
This is the direction that the plane must head, which is approximately 10.7° north of east.
Therefore, the plane should head approximately 10.7° north of east.
To know more about airspeed , refer
https://brainly.com/question/30529519
#SPJ11
2. DETAILS OSCOLPHYS2016 17.3.P.013. The warning tag on a lawn mower states that it produces noise at a level of 88.0 dB. What is this in W/m2; W/m2
the lawn mower produces a sound intensity level of approximately 3.98 x 10^(-6) W/m².
Sound intensity is the amount of energy transmitted through a unit area perpendicular to the direction of sound propagation. The sound intensity level (SIL) is a logarithmic representation of the sound intensity, measured in decibels (dB). To convert the given decibel level to sound intensity in watts per square meter (W/m²), we need to use the formula:SIL = 10 * log₁₀(I / I₀),where SIL is the sound intensity level, I is the sound intensity, and I₀ is the reference sound intensity level (typically set at 10^(-12) W/m²).
Rearranging the formula, we have:
I = I₀ * 10^(SIL / 10).Substituting the given SIL of 88.0 dB into the formula, we get:I = (10^(-12) W/m²) * 10^(88.0 dB / 10) = (10^(-12) W/m²) * 10^(8.8) ≈ 3.98 x 10^(-6) W/m².Therefore, the lawn mower produces a sound intensity level of approximately 3.98 x 10^(-6) W/m².
Learn more about sound intensity here
https://brainly.com/question/32194259
#SPJ11
A beam of light is incident from air on the surface of a liquid. If the angle of incidence is 29.5° and the angle of refraction is 19.7°, find the critical angle for total internal reflection for the liquid when surrounded by air. o Need Help? Read It Master It
When a beam of light passes through one medium into another, it is refracted. The refractive index of a substance is the ratio of the speed of light in a vacuum to the speed of light in the substance.
Snell's law can be used to calculate the angle of refraction when light passes from one medium to another. The critical angle is the angle of incidence in a refractive medium, such as water or glass, at which the angle of refraction is 90 degrees. The formula for calculating the critical angle is given by:
Critcal angle= sin⁻¹ (1/μ) Where,μ is the refractive index of the substance
In this case, the liquid is surrounded by air, which has a refractive index of 1. Therefore, the critical angle for total internal reflection in this case is:
Critical angle = sin⁻¹ (1/μ)
Critical angle = sin⁻¹ (1/1.33)
Critical angle = 48.75 degrees
The answer to the question is the critical angle for total internal reflection for the liquid when surrounded by air is 48.75 degrees.
The angle of incidence and the angle of refraction were given in the question, and the critical angle for total internal reflection for the liquid when surrounded by air was calculated using the formula Critcal angle= sin⁻¹ (1/μ) where μ is the refractive index of the substance. The critical angle is 48.75 degrees in this case.
to know more about refractive index visit:
brainly.com/question/30761100
#SPJ11
A 68.0 kg skater moving initially at 2.55 m/s on rough horizontal ice comes to rest uniformly in 3.05 s due to friction from the ice. Part A What force does friction exert on the skater? Express your answer with the appropriate units. μA 9224 ? F = Value Units Submit Request Answer
Force of friction exerted on skater can be calculated using equation F = m × a,In this case,acceleration can be determined using equation a = Δv / t.The force of friction exerted on the skater is approximately -56.889 N.
To calculate the force of friction, we first need to determine the acceleration. The skater comes to rest uniformly in 3.05 seconds, so we can use the equation a = Δv / t, where Δv is the change in velocity and t is the time. The initial velocity is given as 2.55 m/s, and the final velocity is 0 m/s since the skater comes to rest. Thus, the change in velocity is Δv = 0 m/s - 2.55 m/s = -2.55 m/s.
Next, we can calculate the acceleration: a = (-2.55 m/s) / (3.05 s) = -0.8361 m/s^2 (rounded to four decimal places). The negative sign indicates that the acceleration is in the opposite direction to the skater's initial motion.
Finally, we can calculate the force of friction using the equation F = m × a, where m is the mass of the skater given as 68.0 kg. Substituting the values: F = (68.0 kg) × (-0.8361 m/s^2) ≈ -56.889 N (rounded to three decimal places). The force of friction exerted on the skater is approximately -56.889 N.
To learn more about Force of friction click here : brainly.com/question/13707283
#SPJ11
(a) What is the order of magnitude of the number of protons in your body?
Let's assume your body is mostly composed of hydrogen atoms, which have an atomic number of 1. Therefore, each hydrogen atom has 1 proton.
The order of magnitude of the number of protons in your body can be estimated by considering the number of atoms in your body and the number of protons in each atom.
First, let's consider the number of atoms in your body. The average adult human body contains approximately 7 × 10^27 atoms.
Next, we need to determine the number of protons in each atom. Since each atom has a nucleus at its center, and the nucleus contains protons, we can use the atomic number of an element to determine the number of protons in its nucleus.
For simplicity, let's assume your body is mostly composed of hydrogen atoms, which have an atomic number of 1. Therefore, each hydrogen atom has 1 proton.
Considering these values, we can estimate the number of protons in your body. If we multiply the number of atoms (7 × 10^27) by the number of protons in each atom (1), we find that the order of magnitude of the number of protons in your body is around 7 × 10^27.
It's important to note that this estimation assumes a simplified scenario and the actual number of protons in your body may vary depending on the specific composition of elements.
to learn more about proton
https://brainly.com/question/12535409
#SPJ11
An engine has efficiency of 15% as it absorb 400 J of heat from higher temperature region. How much extra heat should it dissipates to lower temperature reservoir to make efficiency of this engine
we cannot solve for the required extra heat to dissipate without knowing the temperatures T1 and T2.
Given:
Efficiency of the engine (η) = 15%
Heat absorbed from a higher temperature region = 400 J
Let Q be the extra heat that the engine should dissipate to a lower temperature reservoir to achieve the desired efficiency.
Using the formula for efficiency:
Efficiency (η) = Work done / Heat absorbed
The heat engine transfers heat from a high-temperature region to a low-temperature region, producing work in the process.
Substituting the given values:
η = 15/100
Heat absorbed = 400 J
Work done by the engine = η × Heat absorbed
Work done = (15/100) × 400 J = 60 J
The efficiency equation can be written as:
η = 1 - T2/T1
Where T1 is the temperature of the high-temperature reservoir and T2 is the temperature of the low-temperature reservoir.
We are given the work done by the engine (60 J) but not the temperatures T1 and T2.
Therefore, we cannot solve for the required extra heat to dissipate without knowing the temperatures T1 and T2.
Learn more about Heat Dissipation:
https://brainly.com/question/33288165
#SPJ11
A sprinter starts from rest and accelerates to her maximum speed of 9.5 m/s In a distance of 9.0 m. (a) What was her acceleration, if you assume it to be constant? 9.5 m/s X Dimensionally incorrect. Please check the type or dimension of your unit. (b) If this maximum speed is maintained for another 81.9 m, how long does it take her to run 90.9 m?
(a) The acceleration of the sprinter is approximately 5.014 m/s². (b) It takes approximately 17.284 seconds for the sprinter to run 90.9 m.
To find the acceleration of the sprinter, we can use the kinematic equation;
v² = u² + 2as
where;
v = final velocity = 9.5 m/s
u = initial velocity = 0 m/s (starting from the rest)
s = distance covered = 9.0 m
Rearranging the equation to solve for acceleration (a), we have;
Plugging in the values;
a = (9.5² - 0²) / (2 × 9.0)
a = 90.25 / 18
a ≈ 5.014 m/s²
Therefore, the acceleration of the sprinter is approximately 5.014 m/s².
a = (v² - u²) / (2s)
If the sprinter maintains the maximum speed of 9.5 m/s for another 81.9 m, we can use the equation:
s = ut + (1/2)at²
where;
s = total distance covered = 90.9 m
u = initial velocity = 9.5 m/s
a = acceleration = 0 m/s² (since the speed is maintained)
t = time taken
Rearranging the equation to solve for time (t), we have;
t = (2s) / u
Plugging in the values;
t = (2 × 81.9) / 9.5
t ≈ 17.284 seconds
Therefore, it takes approximately 17.284 seconds for the sprinter to run 90.9 m.
To know more about acceleration here
https://brainly.com/question/29761692
#SPJ4
Coronary arteries are responsible for supplying oxygenated blood to heart muscle. Most heart attacks are caused by the narrowing of these arteries due to arteriosclerosis, the deposition of plaque along the arterial walls. A common physiological response to this condition is an increase in blood pressure. A healthy coronary artery. is 3.0 mm in diameter and 4.0 cm in length. ▼ Part A Consider a diseased artery in which the artery diameter has been reduced to 2.6 mm. What is the ratio Qdiseased/Qhealthy if the pressure gradient along the artery does not change?
The required ratio Qdiseased/Qhealthy if the pressure gradient along the artery does not change is 0.69.
To solve for the required ratio Qdiseased/Qhealthy, we make use of Poiseuille's law, which states that the volume flow rate Q through a pipe is proportional to the fourth power of the radius of the pipe r, given a constant pressure gradient P : Q ∝ r⁴
Assuming the length of the artery, viscosity and pressure gradient remains constant, we can write the equation as :
Q = πr⁴P/8ηL
where Q is the volume flow rate of blood, P is the pressure gradient, r is the radius of the artery, η is the viscosity of blood, and L is the length of the artery.
According to the given values, the diameter of the healthy artery is 3.0 mm, which means the radius of the healthy artery is 1.5 mm. And the diameter of the diseased artery is 2.6 mm, which means the radius of the diseased artery is 1.3 mm.
The volume flow rate of the healthy artery is given by :
Qhealthy = π(1.5mm)⁴P/8ηL = π(1.5)⁴P/8ηL = K*P ---(i)
where K is a constant value.
The volume flow rate of the diseased artery is given by :
Qdiseased = π(1.3mm)⁴P/8ηL = π(1.3)⁴P/8ηL = K * (1.3/1.5)⁴ * P ---(ii)
Equation (i) / Equation (ii) = Qdiseased/Qhealthy = K * (1.3/1.5)⁴ * P / K * P = (1.3/1.5)⁴= 0.69
Hence, the required ratio Qdiseased/Qhealthy is 0.69.
To learn more about viscosity :
https://brainly.com/question/2568610
#SPJ11
A compound microscope with objective NA = 0.3 is being used to image a biological specimen in visible light under normal focusing conditions. What is the minimum spatial detail which can be clearly resolved in the image? State any assumptions made.
To determine the minimum spatial detail that can be resolved by a compound microscope, we can use the formula for the minimum resolvable distance, also known as the resolving power. The minimum spatial detail that can be clearly resolved in the image is approximately 2,243 nanometers.
The resolving power of a microscope is given by:
Resolving Power (RP) = 1.22 * (λ / NA)
Where: RP is the resolving power
λ (lambda) is the wavelength of light being used
NA is the numerical aperture of the objective lens
In this case, the microscope is being used with visible light. The approximate range for visible light wavelengths is 400 to 700 nanometers (nm). To calculate the minimum spatial detail that can be resolved, we need to choose a specific wavelength.
Let's assume we're using green light, which has a wavelength of around 550 nm. Plugging in the values:
Resolving Power (RP) = 1.22 * (550 nm / 0.3)
Calculating the resolving power:
RP ≈ 2,243 nm
Therefore, under the given conditions, the minimum spatial detail that can be clearly resolved in the image is approximately 2,243 nanometers.
Assumptions made:
The microscope is operating under normal focusing conditions, implying proper alignment and adjustment.
The specimen is adequately prepared and positioned on the microscope slide.
The microscope is in optimal working condition, with no aberrations or limitations that could affect the resolution.
The numerical aperture (NA) provided refers specifically to the objective lens being used for imaging.
The calculation assumes a monochromatic light source, even though visible light consists of a range of wavelengths.
To learn more about, resolving power, click here, https://brainly.com/question/31991352
#SPJ11
(a) What is the maximum angular magnification he can produce in a telescope?
In optics, the maximum angular magnification produced by a telescope is determined by the ratio of the focal length of the objective lens to the focal length of the eyepiece. It can be defined as the maximum angular size that an object can have in the eyepiece for a given distance between the objective lens and the eyepiece.
The formula for the angular magnification is given by: M = fo/fe. Where M is the magnification, fo is the focal length of the objective lens, and fe is the focal length of the eyepiece. To get the maximum angular magnification that a telescope can produce, we need to find the ratio of the focal lengths of the objective lens and the eyepiece. To illustrate, let us assume that the focal length of the objective lens is 1000 mm, and the focal length of the eyepiece is 10 mm. The maximum angular magnification produced by the telescope is: M = fo/fe = 1000/10 = 100. Therefore, the maximum angular magnification that the telescope can produce is 100. This means that objects will appear 100 times larger when viewed through the telescope than they would with the bare eye.
Thus, the maximum angular magnification produced by a telescope is determined by the ratio of the focal length of the objective lens to the focal length of the eyepiece. The formula for the angular magnification is M = fo/fe. In order to find the maximum angular magnification, we need to know the focal lengths of the objective lens and the eyepiece. In the example given, the maximum angular magnification produced by the telescope was 100.
To know more about angular magnification visit:
brainly.com/question/31393439
#SPJ11
Problem 8.44 A centrifuge rotor rotating at 9800 rpm shut off and is eventually brought uniformly to rest by a frictional torque of 1.91 m N. Part A If the mass of the rotor is 4.16 kg and it can be approximated as a solid cylinder of radius 0.0440 m, through how many revolutions will the rotor turn before coming to rest? Express your answer to three significant figures. VE ΑΣΦ N = 71.6 Submit Part B ! You have already submitted this answer. Enter a new answer. No credit lost. Try again. D Previous Answers Request Answer How long will it take? Express your answer to three significant figures and include the appropriate units. t = 0.885 μÅ Provide Feedback S Submit Previous Answers Request Answer ? ? X Incorrect; Try Again; 5 attempts remaining revolutions
The centrifuge rotor, with a mass of 4.16 kg and a radius of 0.0440 m, comes to rest after a frictional torque of 1.91 mN is applied.
To find the number of revolutions the rotor will turn before coming to rest, we can use the relationship between torque and angular displacement. The rotor will complete approximately 71.6 revolutions before coming to rest.
The frictional torque applied to the rotor causes it to decelerate and eventually come to rest. We can use the equation for torque:
Torque = Moment of Inertia * Angular Acceleration
The moment of inertia for a solid cylinder is given by:
Moment of Inertia = (1/2) * mass * radius^2
Given the mass of the rotor as 4.16 kg and the radius as 0.0440 m, we can calculate the moment of inertia.
Next, we can rearrange the torque equation to solve for angular acceleration:
Angular Acceleration = Torque / Moment of Inertia
Plugging in the values of torque and moment of inertia, we can find the angular acceleration.
Since the rotor starts with an initial angular velocity of 9800 rpm and comes to rest, we can use the equation:
Angular Acceleration = (Final Angular Velocity - Initial Angular Velocity) / Time
By rearranging this equation, we can solve for time.
The number of revolutions can be calculated by multiplying the time by the initial angular velocity and dividing by 2π.
Therefore, the rotor will complete approximately 71.6 revolutions before coming to rest.
Learn more about torque here: brainly.com/question/30338175
#SPJ11
Mr. Duncan is riding a merry-go-round at the carnival. It starts from rest and accelerates at a constant rate. After 60 seconds, Mr. Duncan has rotated an angular displacement of 125.7 radians. . What is Mr. Duncan's angular acceleration? a) 0.011 rad/s² b) 0.0056 rad/s² A c) 0.035 rad/s² d) 0.07 rad/s²
Angular displacement represents the change in the angular position of an object or particle as it rotates about a fixed axis. It is measured in radians (rad) or degrees (°). Angular acceleration refers to the rate of change of angular velocity. It represents how quickly an object's angular velocity is changing as it rotates.
Angular displacement is a vector quantity that indicates both the magnitude and direction of the rotation. For example, if an object starts at an initial angular position of θ₁ and rotates to a final angular position of θ₂, the angular displacement (Δθ) is given by: Δθ = θ₂ - θ₁
Angular acceleration is measured in radians per second squared (rad/s²). Mathematically, angular acceleration (α) is defined as the change in angular velocity (Δω) divided by the change in time (Δt): α = Δω / Δt. If an object's initial angular velocity is ω₁ and the final angular velocity is ω₂, the angular acceleration can also be expressed as: α = (ω₂ - ω₁) / Δt. In summary, angular displacement describes the change in angular position, while angular acceleration quantifies the rate of change of angular velocity.
The given quantities are as follows: Angular displacement, θ = 125.7 radians Time, t = 60 s Angular acceleration is the rate of change of angular velocity, which can be given as:α = angular acceleration,ω0 = initial angular velocity,ωf = final angular velocity, t = time taken. Now, the angular displacement of Mr. Duncan is given as:θ = (1/2) × (ω0 + ωf) × t. We know that initial angular velocity ω0 = 0 rad/sSo,θ = (1/2) × (0 + ωf) × t ⇒ ωf = 2θ/t= (2 × 125.7)/60= 4.2 rad/s. Now, angular acceleration, α = (ωf - ω0) / t= 4.2/60= 0.07 rad/s². Therefore, the correct option is d) 0.07 rad/s².
For similar problems on rotational motion visit:
https://brainly.com/question/31356485
#SPJ11
