Answer:
4.37 g of barium sulphate
Explanation:
The reaction equation is;
3BaCl2(aq) + Fe2(SO4)3(aq) ---->3 BaSO4(s) + 2FeCl3(aq)
From the question, the number of moles of both barium chloride and FeSO4 = 125/1000 L × 0.150 M = 0.01875 moles
To find the limiting reactant;
3 moles of barium chloride yields 3 moles of barium sulphate
0.01875 moles of barium chloride yields 3 × 0.01875 moles/3 = 0.01875 moles of barium sulphate
1 mole of iron III sulphate yields 3 moles of barium sulphate
0.01875 molesof iron III sulphate yields 0.01875 moles ×3/1 = 0.05625 moles of barium sulphate
Hence,barium chloride is the limiting reactant
Amount of barium sulphate produced = 0.01875 moles × 233 g/mol = 4.37 g of barium sulphate
Look at this balanced chemical reaction: N2 + 3H2 2NH3
How many grams of ammonia can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm?
Answer: A mass of 124457.96 g ammonia is produced by reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Explanation:
Given: Volume = 450 L
Temperature = 450 K
Pressure = 300 atm
Using ideal gas equation, moles of nitrogen are calculated as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = tempertaure
Substitute values into the above formula as follows.
[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{135000}{36.945}\\= 3654.08 mol[/tex]
According to the given equation, 1 mole of nitrogen forms 2 moles of ammonia. So, moles of ammonia formed by 3654.08 moles of nitrogen is as follows.
[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]
As moles is the mass of substance divided by its molar mass. So, mass of ammonia (molar mass = 17.03 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\7308.16 = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]
Thus, we can conclude that a mass of 124457.96 g ammonia is produced by reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Hydrogen fluoride, HF exist as liquid at room temperature. Explain this phenomenon based on the formation of hydrogen bonds.
Explanation:
The hydrogen fluoride molecule is highly polar, in the liquid and gaseous phases, HF prone to formation hydrogen bonds. ... These hydrogen bonds are strong, their energy is 41.5 kj/mol.Hydrogen fluoride can be a liquid or gas at room temperature; it has a boiling point of 19.5 ºC. It is corrosive, colourless and has a very strong odour.The gaseous compound formed when dry fluorine gas reacts with dry Hydrogen, gas is called hydrogen fluoride. Hydrogen fluoride gas on condensation forms liquid hydrogen fluoride which is also referred to as anhydrous hydrogen fluoride or anhydrous hydrofluoric acidhope it helps
stay safe healthy and happy..In many halocarbons, among them chloroethane (CH3CH2Cl), a halogen is attached to an aliphatic carbon chain. These halocarbons are called _____.
1.carboxylic acids
2.alkyl halides
3.aryl halides
4.phenyl halides
How do you think you results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4
Answer:
Due to weak oxidizing agent.
Explanation:
In my opinion the results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4 because K2Cr2O7/H2SO4 is weak oxidizing agent as compared to KMnO4. An oxidizing agent is a substance that has the ability to oxidize other substances means that accept their electrons so that's why the results of strong oxidizing agent is different than weak oxidizing agent.
The results of the reaction will be affected due to the difference in :
Oxidizing agent strength
The use of K₂Cr₂O7 / H₂SO₄ which is weaker oxidizing agent in the reaction will produce a different result from the use of KmnO₄ which is a stronger oxidizing agent.
This is because stronger oxidizing agents in reaction readily accept electrons from reactants while weaker oxidizing agents do not readily accept electrons from substances reacting in the reaction.
Therefore we can conclude that The results of the reaction will be affected due to the difference in oxidizing agent strength
Learn more : https://brainly.com/question/16450420
Although your question is incomplete a general solution is provide within the scope of your question
Si 40 g de un compuesto C6H10O5 se disuelven en 500 g de agua, determine el punto de ebullición de esta solución. (Agua: temperatura de ebullición 100 °C y Ke = 0,52 °C/m)
The question is: If 40 g of a compound C6H10O5 are dissolved in 500 g of water, determine the boiling point of this solution. (Water: boiling temperature 100 ° C and Kb = 0.52 ° C / m).
Answer: The boiling point of given solution is [tex]100.256^{o}C[/tex].
Explanation:
Given: Mass of solute = 40 g
Mass of solvent = 500 g (1 g = 0.001 kg) = 0.5 kg
[tex]K_{b} = 0.52^{o}C/m[/tex]
Molality is the moles of solute present in kg of solvent.
Moles is the mass of substance divided by its molar mass. Hence, moles of [tex]C_{6}H_{10}O_{5}[/tex] (molar mass = 162.141 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{40 g}{162.141 g/mol}\\= 0.246 mol[/tex]
Now, molality of the solution is calculated as follows.
[tex]Molality = \frac{molesof solute}{mass(in kg)}\\= \frac{0.246}{0.5 kg}\\= 0.492 m[/tex]
The boiling point is calculated as follows.
[tex]\Delta T_{b} = K_{b}m[/tex]
where,
m = molality
Substitute the values into above formula as follows.
[tex]\Delta T_{b} = K_{b}m\\= 0.52^{o}C/m \times 0.492 m\\= 0.256^{o}C[/tex]
As the boiling point of water is 100 degree Celsius. So, the boiling point of solution is as follows.
[tex](100 + 0.256)^{o}C\\= 100.256^{o}C[/tex]
Thus, we can conclude that the boiling point of given solution is [tex]100.256^{o}C[/tex].
A gas has a pressure of 450 mmHg at 100 degrees Celsius. What will its new pressure be when the temperature rises 200 degrees Celsius
Answer:
P2 = 900 mmHg.
Explanation:
Given the following data;
Initial pressure = 450 mmHg
Initial temperature = 100°C
Final temperature = 200°C
To find the final pressure, we would use Gay Lussac's law;
Gay Lussac states that when the volume of an ideal gas is kept constant, the pressure of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Gay Lussac's law is given by;
[tex] PT = K[/tex]
[tex] \frac{P1}{T1} = \frac{P2}{T2}[/tex]
Making P2 as the subject formula, we have;
[tex] P_{2}= \frac{P1}{T1} * T_{2}[/tex]
[tex] P_{2}= \frac{450}{100} * 200 [/tex]
[tex] P_{2}= 4.5 * 200 [/tex]
Final pressure, P2 = 900 mmHg.
True or false, In a neutral atom of an element, the number of protons always equals the number of electrons.
Answer:
true
Explanation:
As an atom with no charge have same number of proton and electrons
How do you think the bonds between carbon atoms might be different in diamond and graphite?
Both have Giant Covalent Structures, resulting in very high melting temperatures. However each carbon atom in Diamond has 4 covalent bonds with other Carbons, making it extremely strong and hard. On the other hand, each carbon in graphite is bonded to three carbons, and therefore graphite is formed in layers.
what is the difference between physical chemistry and environmental chemistry.
please Answer and give the correct answer...
Answer:
Physical chemistry is the study of macroscopic, and particulate phenomena in chemical systems in terms of the principles, practices, and concepts of physics such as motion, energy, force, time, thermodynamics, quantum chemistry, statistical mechanics, analytical dynamics and chemical equilibrium while environmental chemistry is the study of chemical processes that occur in water, air, terrestrial and living environments, and the effects of human activity on them.
Physical chemistry is the area of chemistry that deals with how materials interact and change. The scientific study of chemical and biological phenomena that take place in the environment is known as environmental chemistry.
Physical chemistry attempts to quantify, correlate, and explain the quantitative features of reactions by focusing, in contrast to other branches, on the physics principles that underlie all chemical interactions (such as the gas laws).
While environmental chemistry is the study of chemical species' sources, reactions, movement, impacts, and fates in the air, soil, and water environments, as well as the impact of human activity and biological activity on these, can be summed up as the field of chemical ecology.
To learn more about environmental chemistry visit;
https://brainly.com/question/25046469
https://brainly.com/question/22517940
A new element R shows chemical properties similar to the element sodium. What is the correct formula of a compound formed with R and sulfur?
R₂S
RS₂
RS
R₂S₂
Answer:
R2S this is because sodium has one 1 valence and sulfur has valence of 2 so when they combine theyinterchange their valence
What element on the periodic table has 5 protons, 5 electrons, and 5 neutrons?
Answer:
Boron
Explanation:
this is your answer
What is the net ionic equation for the following? :)
1. Mg (s) + Na2CrO4 (aq) -->
2. K (s) + Cd(NO3)2 (aq) -->
Answer:
1. Mg (s) + 2Na+(aq) → 2Na(s) + Mg²⁺(aq)
2. 2K(s) + Cd²⁺(aq) → 2K⁺(aq) + Cd(s)
Explanation:
The net ionic equation of a reaction express only the chemical species that are involved in the reaction:
1. Mg (s) + Na2CrO4 (aq) → 2Na + MgCrO4(aq)
The ionic equation:
Mg (s) + 2Na+(aq) + CrO4²⁻ (aq) → 2Na + Mg²⁺ + CrO4²⁻(aq)
Subtracting the ions that don't change:
Mg (s) + 2Na+(aq) → 2Na + Mg²⁺
2. 2K(s) + Cd(NO3)2(aq) → 2KNO3(aq) + Cd(s)
The ionic equation:
2K(s) + Cd²⁺(aq) + 2NO3⁻(aq) → 2K⁺(aq) + 2NO3⁻(aq) + Cd(s)
Subtracting the ions that don't change:
2K(s) + Cd²⁺(aq) → 2K⁺(aq) + Cd(s)What type of soil has the finest of all the soil particles, measuring fewer than 0.002 millimeters in size?
Answer:
Clay soil
Explanation:
There are basically three types of soil namely: Sandy soil, clayey soil and loamy soil. Each of this soil type possess their own distinguishing characteristics. For example, on the basis of particle size and texture, CLAY SOIL possesses the smallest and finest particles.
Particles in a clay soil weighs lesser than 0.002 millimeters (mm) in size, making it have a high water holding or retention capacity.
what is the formula of silver sulphate
Answer:
Ag2SO4
Explanation:
What are two factors that determine the concentration of hydronium (or hydroxide) ions in an acid (or base) solution?
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes, and specific vocabulary has been developed to describe these concentrations in relative terms. A solution is neutral if it contains equal concentrations of hydronium and hydroxide ions; acidic if it contains a greater concentration of hydronium ions than hydroxide ions; and basic if it contains a lesser concentration of hydronium ions than hydroxide ions.
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water
Explanation:
Not my work! I hope this helps!
Si se analizan muestras de Al2O3 en diversos laboratorios se encuentra que todas tienen 52,94% de aluminio (Al) y 47,06% de oxígeno (O). Este dato experimental corresponde a lo expresado por la ley de:
A) La ley de las proporciones definidas
B) La ley de las proporciones múltiples
C) La ley de la conservación de la masa
D) La ley de la conservación de la energía
Of the following transitions in the Bohr hydrogen atom, which of the following
results in the emission of the lowest-energy photon.
n = 1 ® n= 6
n=5 ® n=1
n = 6® n=1
n=3® n=5
n=1 ® n=5
Un medicamento corresponde a una disolución de "nafazolina" (sustancia activa) en agua purificada, en una concentración de 12% V/V. - EXPLICA cuánto soluto hay por cada 100mL del medicamento.
Answer:
12 mL
Explanation:
Según la pregunta;
V / V% concentración del fármaco = 12%
volumen de la solución = 100 ml
De;
V / V% = volumen de fármaco / volumen de solución
volumen de fármaco = V / V% × volumen de solución
volumen de fármaco = 12/100 × 100
= 12 mL
For the equilibrium
2H2S(g) ⇋ 2H2(g) + S2(g) Kc = 9 .0X 10-8 at 700°C
the initial concentrations of the three gases are 0.300 M H2S, 0.300 M H2, and 0. 1 50 M S2' Determine the equilibrium concentrations of the gases.
Answer:
Equilibrium concentrations of the gases are
[tex]H_2S=0.596M[/tex]
[tex]H_2=0.004 M[/tex]
[tex]S_2=0.002 M[/tex]
Explanation:
We are given that for the equilibrium
[tex]2H_2S\rightleftharpoons 2H_2(g)+S_2(g)[/tex]
[tex]k_c=9.0\times 10^{-8}[/tex]
Temperature, [tex]T=700^{\circ}C[/tex]
Initial concentration of
[tex]H_2S=0.30M[/tex]
[tex]H_2=0.30 M[/tex]
[tex]S_2=0.150 M[/tex]
We have to find the equilibrium concentration of gases.
After certain time
2x number of moles of reactant reduced and form product
Concentration of
[tex]H_2S=0.30+2x[/tex]
[tex]H_2=0.30-2x[/tex]
[tex]S_2=0.150-x[/tex]
At equilibrium
Equilibrium constant
[tex]K_c=\frac{product}{Reactant}=\frac{[H_2]^2[S_2]}{[H_2S]^2}[/tex]
Substitute the values
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
By solving we get
[tex]x\approx 0.148[/tex]
Now, equilibrium concentration of gases
[tex]H_2S=0.30+2(0.148)=0.596M[/tex]
[tex]H_2=0.30-2(0.148)=0.004 M[/tex]
[tex]S_2=0.150-0.148=0.002 M[/tex]
Crystals of sodium chloride were prepared by the following method.
1 25.0 cm3
of dilute hydrochloric acid was accurately measured into a conical flask.
2 Aqueous sodium hydroxide was added until the solution was neutral. The volume of
sodium hydroxide added was measured.
3 The solution was evaporated and the crystals washed with approximately 15 cm3
of water.
Which row shows the pieces of apparatus used to measure the 25.0 cm3
of hydrochloric acid, the
volume of aqueous sodium hydroxide and the 15 cm3
of water?
Answer: the answer is C
IF U MIGHT NEED AN EXPLANATION FEEL FREE TO COMMENT
The laboratory equipment like the burette, pipette, and measuring cylinders are used in process of titration process. The solution of NaOH is added by the burette. Thus, option C is correct.
What is titration?Titration has been the analytical technique that uses the known and measured quantity of the solution to estimate the volume of another solution with an unknown volume and known molar concentration.
The laboratory equipment like burette, pipette, and measuring cylinders are used in measuring the volume in the titration process. The burette is filled with sodium hydroxide to measure its quantity.
The pipette is used to transfer the volume of the solution that is known (hydrochloric acid) and the measuring cylinder is used to measure the liquid (water) that is used in chemistry experiments.
Therefore, option C. pipette, burette, and measuring cylinder are the apparatus used in the titration process.
Learn more about titration, here:
https://brainly.com/question/10024565
#SPJ2
ASAAPPP NEED HELP IF ANYONE IS AROUND
i. Using carbon skeletal notation, write the dehydration-condensation reaction that occurs between ethanol and butanoic acid.
ii. What is the name of this ester?
Answer:
In the esterification reaction, an OH from the molecule acid and H from the alcohol form a molecule of water.
Ethanol and butanoic acid forms ethyl butanoate
List twelve types of industry
Answer:
-Aerospace Industry.
-Transport Industry.
-Computer Industry.
-Telecommunication industry.
-Agriculture industry.
-Construction Industry.
-Education Industry.
-Pharmaceutical Industry.
-Food Industry
-Health Care Industry
-Hospitality Industry
-Entertainment Industry
the representative particle for KBr is the?
Answer:
This is a chemical symbol for Potassium Bromide
this symbol (g) in a chemical formula indicates that
Answer:
indicates that the substance is in a gaseous state
Calculate the height of a column of ethanol (C2H5OH) that would be supported by atmospheric pressure. The density of ethanol is 0.789 g/cm3.
Answer:
The height of a column of ethanol is 13.1m
Explanation:
we begin by converting the density to SI unit= 0.789g/cm3* 1kg * [tex]100^{3}[/tex]* [tex]cm^{3}[/tex]
cm * 1000g * [tex]1^{3}m^{3}[/tex]
= 789kg/m3
converting pressure to SI unit= 1 atm =101325 Pa
hence P= hdg
g= 9.81 m/s2
making h the subject of the formula
h= P/dg
h= 101325Pa/ 789kg/m3 * 9.81 m/s2
h= 13.1m
Explain the sharing of electrons between a water molecule that forms four hydrogen bonds with the other four water molecules
Answer:
The sharing of electrons between a water molecule that forms four hydrogen bonds with the other four water molecules:
Explanation:
The hydrogen bond is a weak electrostatic force of attraction that exists between a covalently bonded H-atom and a highly electronegative atom like N,O or F.
In the case of the water molecule,
the highly electronegative atom is Oxygen and the intermolecular hydrogen bond in water is as shown below:
Thus H-bond is a weak electrostatic attraction formed between H-atom and O-atom in water.
if drop a watermelon from the top of one of the tower dorms at CSU, and it takes 3.34 seconds to hit the ground, calculate how tall the building is in meters and then convert into feet.
Answer:
179.5 feet
Explanation:
54.718 m converted to 179.5 feet.
2. As NH4OH is added to an HCl solution, the pH of the solution
A) increases as the OH- concentration decreases
B ) increases as the OH- concentration increases
C ) decreases as the OH- concentration decreases
D ) decreases as the OH- ion concentration increases
Answer:
c
Explanation:
Nh4OH + HCL ---> NH4Cl + H3O
so ph decreases as H3O increases
and OH also decreases
When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.
Why would the solution increase?NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.
This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.
In conclusion, option B is correct.
Find out more on Bases at https://brainly.com/question/15565260.
What is the cause of acid precipitation?
1) ozone
2) nitrogenous oxides
3) ammonia
4) chlorofluorocarbons (CFCs)
Answer:
nitrogenous oxides
Explanation:
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. ... In addition, the exhaust from cars, trucks, and buses releases nitrogen oxides and sulfur dioxide into the air. These pollutants cause acid rain.
The correct answer in you question is 2) nitrogenous oxide
I hope it helps ●~●
#CarryOnLearningWhich of the following statements regarding the movement of electrons during cellular respiration is true?
A. Electrons tend to move away from O2.
B. O2 is reduced when it accepts electrons and forms water.
C. The electrons release large amounts of energy each time they are transferred from one molecule to another.
D. O2 is eventually oxidized by the electrons to form water.
Answer:
B. O2 is reduced when it accepts electrons and forms water.
Explanation:
During cellular respiration water is formed when oxygen receives electrons and picks up protons at the conclusion of the electron transport chain. The electron transport chain will stop functioning if there isn't enough oxygen to receive electrons (for example, because a person isn't breathing in enough oxygen), and ATP will no longer be created by chemiosmosis. Cells can't carry out the reactions they need to function if they don't even have enough ATP, and they may perish after a long period of time.
