What mass of lithium chloride is found in 85 g of a 25% by mass solution? Find the mass percent composition of Br in CuBr_2 A 4.56 g sugar cube (Sucrose: C_12 H_33O_11) is dissolved in a 350, mi teacup of 80 degree C water. What is the mass percent composition of the sugar solution? Given: Density of water at 80 degree C = 0.975 g/ml Fill in the chart below using the information provided.

Answers

Answer 1

Given Mass = 85 concentration = 25% by mass. Mass % = (Mass of solute / Mass of solution) × 100%Therefore,Mass of solute = Mass % × Mass of solution / 100%We have Mass % and Mass of solution.

So, we can find the Mass of solute. Mass of lithium chloride = 25% × 85 g / 100% = 21.25 therefore, 21.25 g of lithium chloride is found in 85 g of a 25% by mass solution. Given CuBr2Mass of Br in CuBr2 = 2 × Atomic mass of Br = 2 × 79.904 = 159.808 gMass % composition of Br = (Mass of Br / Molecular mass of CuBr2) × 100%Molecular mass of CuBr2 = Atomic mass of Cu + Atomic mass of 2Br = 63.546 + 2 × 79.904 = 223.354 g/molars % composition of Br = (159.808 / 223.354) × 100% = 71.53%Given Mass of Sucrose = 4.56 volume of water = 350 density of water = 0.975 g/temperature of water = 80°CWe can use the below formula to calculate the mass % composition of the sugar solution.

Mass % composition = (Mass of solute / Mass of solution) × 100%Mass of water = Volume of water × Density of water = 350 ml × 0.975 g/ml = 341.25 gMass of solute = Mass of Sucrose = 4.56 gMass of solution = Mass of Sucrose + Mass of water = 4.56 g + 341.25 g = 345.81 gMass % composition = (4.56 / 345.81) × 100% = 1.32%The table is: | Properties   | LiCl          | CuBr2          | Sugar Solution | |---------------|---------------|----------------|----------------| | Mass          | 21.25 g       | -              | 4.56 g         | | Mass %        | -             | 71.53%         | 1.32%          | | Molecular Mass| -             | 223.354 g/mol  | -              |

Read more about Molecular mass here;https://brainly.com/question/837939

#SPJ11


Related Questions

what can you conclude about changes in temperature, rainfall, and changes in co2 in the ecosystem from these numbers?

Answers

The data on temperature, rainfall, and [tex]CO_2[/tex] levels in the ecosystem suggest a correlation between these variables, indicating a potential impact of climate change on the ecosystem.

Upon analyzing the provided data, it is evident that there are significant changes in temperature, rainfall, and [tex]CO_2[/tex] levels in the ecosystem. These changes can be attributed to the phenomenon of climate change. The increasing temperature values imply a warming trend, which can have profound effects on the ecosystem.

Rising temperatures can lead to altered precipitation patterns, affecting the amount and distribution of rainfall in the ecosystem. The changes in rainfall can impact various aspects of the ecosystem, including plant growth, water availability, and biodiversity. Furthermore, the increase in [tex]CO_2[/tex] levels in the ecosystem is a result of human activities, primarily the burning of fossil fuels.

Elevated [tex]CO_2[/tex] levels can contribute to the greenhouse effect, leading to further warming of the planet. Overall, these observed changes in temperature, rainfall, and [tex]CO_2[/tex] levels indicate the influence of climate change on the ecosystem.

Learn more about greenhouse effect here:

https://brainly.com/question/32325006

#SPJ11

An atomic nucleus of mass m traveling with speed v collides elastically with a target particle of mass 2m initially at rest and is scattered an 90 degrees. a. what angle does the target particle move after collision? b. what are the final speeds of the two particles? c. what fraction of the initial kinetic energy is transferred to the target particle? I really do not understand how trig is used in these types of problems. I have difficulty understanding how to break the components up. Other tutorials just use sine or cosine without explaining why we use them.. Can you please explain with as much detail as possibly your method and reasoning to solve this problem?

Answers

Kt/K1 = (1/4)mv²/(1/2)mv² = 1/2Therefore, half of the initial kinetic energy is transferred to the target particle.

Since the collision is elastic, the total momentum of the system is conserved. Therefore, the initial momentum of the system is zero because the target particle is at rest and the final momentum of the system is also zero. Since the nucleus is scattered at an angle of 90 degrees, it implies that the angle of deflection is 90 degrees.

Since the mass of the target particle is 2m and it is at rest, the momentum of the target particle after collision is p' and the momentum of the nucleus is p. Conservation of momentum means that:

p + p' = 0

It implies that:

p = -p'

Therefore:

p = mv and p' = -mv

Therefore, the target particle moves with a momentum of -mv. The angle that it moves after the collision can be calculated using the momentum vectors, as shown below. Let θ be the angle of deflection of the target particle. We have:

cos θ = -p'/mv = -(-mv)/mv = 1

Therefore, θ = 0 degrees. The target particle moves in the same direction as the nucleus, but with a speed of v/2.b) Since the collision is elastic, the total kinetic energy of the system is conserved. The initial kinetic energy of the system is:

K1 = (1/2)mv²

The final kinetic energy of the system is:

K2 = (1/2)m(v/2)² + (1/2)m(v/2)² = (1/2)(1/2)mv²

Therefore, the final kinetic energy of the system is half the initial kinetic energy of the system.

The final speed of the nucleus is also v/2.c) The fraction of the initial kinetic energy transferred to the target particle is:

Kt/K1 = 1 - Kn/K1

where Kt is the kinetic energy of the target particle after collision, Kn is the kinetic energy of the nucleus after collision, and K1 is the initial kinetic energy of the system. The final kinetic energy of the target particle is:

Kt = (1/2)(1/2)mv² = (1/4)mv²

The final kinetic energy of the nucleus is: Kn = (1/2)(1/2)mv² = (1/4)mv²

To know more about Total Kinetic Energy visit:

https://brainly.com/question/26660226

#SPJ11

what+is+the+mass+%+of+acetonitrile+in+a+2.17+m+solution+of+acetonitrile+(mm+=+41.05+g/mol)+in+water?+the+density+of+the+solution+is+0.810+g/ml.

Answers

The mass percentage of acetonitrile in the 2.17 M solution is approximately 10996%.

To calculate the mass percentage of acetonitrile in the given solution, we need to determine the mass of acetonitrile present in a specific volume of the solution.
Given:
Molarity of the acetonitrile solution = 2.17 M
Molar mass of acetonitrile (CH3CN) = 41.05 g/mol
Density of the solution = 0.810 g/mL
First, we need to calculate the mass of the solution. Since we have the density and volume, we can use the formula:
Mass of solution = Volume of solution × Density of solution
Mass of solution = 1 mL × 0.810 g/mL = 0.810 g
Next, we calculate the number of moles of acetonitrile in the solution using the formula:
Moles of acetonitrile = Molarity of the solution × Volume of solution
Moles of acetonitrile = 2.17 mol/L × 1 L = 2.17 mol
Finally, we calculate the mass of acetonitrile:
Mass of acetonitrile = Moles of acetonitrile × Molar mass of acetonitrile
Mass of acetonitrile = 2.17 mol × 41.05 g/mol = 89.0965 g
Now we can calculate the mass percentage of acetonitrile:
Mass % of acetonitrile = (Mass of acetonitrile / Mass of solution) × 100
Mass % of acetonitrile = (89.0965 g / 0.810 g) × 100 ≈ 10996%
Therefore, the mass percentage of acetonitrile in the 2.17 M solution is approximately 10996%.

To know more about Molarity, click here https://brainly.com/question/31545539

#SPJ11

When CH4(g) reacts with H2O(g) to form H2(g) and CO(g), 206 kJ of energy are absorbed for each mole of CH4(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation. 2))When CH4(g) reacts with O2(g) to form CO2(g) and H2O(g), 802 kJ of energy are evolved for each mole of CH4(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation. 3)))When H2(g) reacts with O2(g) to form H2O(g), 242 kJ of energy are evolved for each mole of H2(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation.

Answers

The 206 kJ of energy is absorbed for each mole of CH4(g) that reacts. This means that the reaction is endothermic.

Therefore, the balanced thermochemical equation is as follows.

[tex]CH4(g) + H2O(g) → H2(g) + CO(g)ΔH[/tex]

= [tex]+ 206 kJ[/tex] (Energy is absorbed)2)

[tex]CH4(g) + O2(g) → CO2(g) + H2O(g)[/tex]

And,

802 kJ of energy is evolved for each mole of CH4(g) that reacts. This means that the reaction is exothermic.

Therefore, the balanced thermochemical equation is as follows.

[tex]CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)ΔH[/tex]

= - 802 kJ (Energy is evolved)3)  Given reaction is;

[tex]H2(g) + O2(g) → H2O(g)[/tex]

And, 242 kJ of energy is evolved for each mole of H2(g) that reacts. This means that the reaction is exothermic. Therefore, the balanced thermochemical equation is as follows.

[tex]H2(g) + 1/2 O2(g) → H2O(g)ΔH[/tex]

= [tex]- 242 kJ[/tex](Energy is evolved)

To know more about endothermic visit:

https://brainly.com/question/11902331

#SPJ11

At 2500 K, Kp is equal to 20 for the reaction Cl2(g) + F2(g) ⇌ 2 CIF(g) An analysis of a reaction vessel at 2500 K reavealed the presence of 0.18 atm Cl2, 0.31 atm F2, and 0.92 atm CIF. What will tend to happen to CIF as the reaction pro- ceeds toward equilibrium?

Answers

CIF will tend to increase as the reaction proceeds toward equilibrium.

Given that Kp is equal to 20 at 2500 K, we can calculate the initial concentrations of CIF using the ideal gas law. Let's assume the initial volume is 1 liter for simplicity.

For Cl2:

P(Cl2) = 0.18 atm

n(Cl2) = P(Cl2) * V / (RT) = 0.18 mol

For F2:

P(F2) = 0.31 atm

n(F2) = P(F2) * V / (RT) = 0.31 mol

For CIF:

P(CIF) = 0.92 atm

n(CIF) = P(CIF) * V / (RT) = 0.92 mol

Based on the balanced equation, for every 1 mole of CIF, 1 mole of Cl2 and 1 mole of F2 are consumed. Therefore, the initial moles of CIF are equal to the initial moles of Cl2 and F2.

Since the initial concentrations of CIF, Cl2, and F2 are the same, and the reaction is not at equilibrium, we can conclude that CIF will tend to increase as the reaction proceeds toward equilibrium. This is because the reaction favors the formation of CIF, as indicated by the value of Kp. As CIF forms, the concentrations of Cl2 and F2 decrease, driving the reaction in the forward direction to restore equilibrium.

for more questions on CIF
https://brainly.com/question/28297792
#SPJ8

a sample of einsteinium- decayed to of its original mass after days. T/F

Answers

The statement "a sample of einsteinium- decayed to of its original mass after days" is False. Einsteinium-253 is a radioactive element with a half-life of 20.47 days.

This means that after 20.47 days, half of the original sample will have decayed. After 40.94 days, 75% of the original sample will have decayed. After 61.41 days, 87.5% of the original sample will have decayed. And so on.

So, a sample of einsteinium-253 would not decay to 1/8 of its original mass after 40 days. It would decay to 75% of its original mass.

The half-life of a radioactive element is the time it takes for half of the original sample to decay. The half-life of einsteinium-253 is relatively short, which means that it is a very unstable element. It is also very rare, as it is only produced in nuclear reactors.

Einsteinium-253 is not used for any practical purposes, but it is of interest to scientists because it can be used to study the properties of other radioactive elements.

To know more about the einsteinium-253 refer here :

https://brainly.com/question/15389697#

#SPJ11

omplete the nuclear equation describing the synthesis of mendelevium-256 by the bombardment of einsteinium-253 by α particles.

Answers

The complete nuclear equation is;

253/99 Es + 4/2He → 256/101 Md + 1/0n

What is nuclear reaction equation?

The atomic and mass numbers of the particles involved are displayed in a nuclear equation, which is a symbolic depiction of a nuclear process. It is used to explain the alterations that take place inside atomic nuclei during nuclear reactions, such as radioactive decay, fusion, and fission.

Typically, nuclear equations have two sides that are divided by an arrow. On the left side of the arrow are the reactants, or initial particles, and on the right side are the products, or final particles. The arrow denotes the process of transformation or reaction.

Learn more about nuclear reaction:https://brainly.com/question/13315150

#SPJ4

study this chemical reaction: 2ca o2 2cao then, write balanced half-reactions describing the oxidation and reduction that happen in this reaction.

Answers

The balanced half-reactions describing the oxidation and reduction that happen in the chemical reaction 2Ca + O2 → 2CaO are given below: Oxidation Half-Reaction:2Ca → 2Ca2+ + 4e- Reduction Half-Reaction:O2 + 4e- → 2O2-.

Oxidation half-reaction is the reaction in which a species loses electrons, whereas in reduction half-reaction, a species gains electrons to get reduced. These half-reactions are balanced with the number of electrons equal in both of them, then combined to give the balanced overall reaction.

The chemical equation for the given reaction is: 2Ca + O2 → 2CaOTo write the balanced half-reactions, the given equation is separated into two half-reactions. Then, balance the atoms and charges in each half-reaction by adding electrons to make both sides equal in terms of the number of atoms and charges.

To know more about half-reactions visit:

https://brainly.com/question/18403544

#SPJ11

what is the purpose of the slow-loading procedure from steps 1-4?

Answers

The purpose of the slow-loading procedure from steps 1-4 is to increase the overall stability and strength of the system. This process is known as annealing, and it involves heating the material to a specific temperature

The process of annealing involves heating a material, such as metal, to a specific temperature, then allowing it to cool slowly. This process alters the microstructure of the material, which can improve its properties. For example, annealing can increase the ductility, toughness, and strength of a material. The process is often used to improve the machinability of a metal, making it easier to work with and shape.

The slow-loading procedure from steps 1-4 is a type of annealing process that is used to increase the strength and stability of the system. The procedure involves heating the material to a specific temperature, then allowing it to cool slowly, which changes the microstructure of the material.

To know more about temperature visit:-

https://brainly.com/question/7510619

#SPJ11

what is the correct cell notation for a voltaic cell based on the reaction below? cu2 (aq) fe(s) –––> cu(s) fe2 (aq)

Answers

The correct cell notation for a voltaic cell based on the given reaction [tex]cu2 (aq) + Fe(s) → Cu(s) + Fe2 (aq)[/tex] is as follows  chemical reactions in an electrochemical cell.

The cell notation consists of two vertical lines indicating the phase boundary between the two electrodes and a double vertical line that indicates a salt bridge or a porous membrane. In the given chemical reaction, Cu is reduced and Fe is oxidized. Therefore, Cu electrode will be the cathode, where reduction will take place, and Fe electrode will be the anode, where oxidation will take place. The salt bridge or porous membrane will be used to maintain electrical neutrality. In the cell notation, the left-hand side represents the cathode, and the right-hand side represents the anode.

Therefore, the correct cell notation for the given chemical reaction is [tex]Cu(s)|Cu2+ (aq) || Fe2+ (aq) | Fe(s)[/tex]

This cell notation shows that a copper electrode with copper ions is present on the left side of the cell, and an iron electrode with iron ions is present on the right side of the cell. The double vertical line represents the salt bridge used to complete the circuit.

To know more about chemical reactions visit:

https://brainly.com/question/28792948

#SPJ11

what does the number between parentheses in a chemical formula mean

Answers

The number between the parentheses in a chemical formula represents the subscript of that particular group of atoms or polyatomic ion that is enclosed in the parentheses.

In chemistry, we use chemical formulas to express the number of atoms that make up a molecule or compound. Chemical formulas are a shorthand way of writing a compound’s name and its chemical structure. A chemical formula indicates the type and number of atoms that are present in a compound or molecule.

For example, the chemical formula for water is H2O, where H is the symbol for hydrogen, and O is the symbol for oxygen. This formula tells us that one molecule of water is made up of two hydrogen atoms and one oxygen atom, which are bonded together.Another example, Ca(OH)2, which represents the ionic compound calcium hydroxide. The parentheses indicate that the hydroxide (OH) group is made up of one oxygen atom and one hydrogen atom. The subscript 2 outside the parentheses tells us that there are two hydroxide groups in the molecule.

learn more about chemical formula here

https://brainly.com/question/11574373

#SPJ11

What is the kinetic energy of the emitted electrons when cesium is exposed to UV rays of frequency 1.8×10^15Hz? the emitted electrons when cesium is exposed to UV rays of frequency 1.8×1015Hz? Express your answer in joules to three significant figures.

Answers

The kinetic energy of the emitted electrons when cesium is exposed to UV rays of frequency 1.8×10¹⁵Hz is 4.61 x 10⁻¹⁹ J.

When Cesium is exposed to UV rays of frequency 1.8×10¹⁵ Hz, the kinetic energy of the emitted electrons is 4.61 x 10⁻¹⁹ J. In order to determine the kinetic energy of the emitted electrons when Cesium is exposed to UV rays of frequency 1.8×10¹⁵ Hz, the formula below can be utilized:

E = hν - φ

where E is the kinetic energy of the emitted electrons, h is the Planck constant (6.626 x 10⁻³⁴ Js), ν is the frequency of the radiation, and φ is the work function of the metal.

For Cesium, the work function is 1.95 eV or 3.13 x 10⁻¹⁹ J. Substituting the values, we have:

E = (6.626 x 10⁻³⁴ Js)(1.8×10¹⁵Hz) - (3.13 x 10⁻¹⁹ J)

= 4.61 x 10⁻¹⁹ J.

To know more about kinetic energy visit:

https://brainly.com/question/999862

#SPJ11

For the given reactions, classify the reactants as the reducing agent, oxidizing agent, or neither.

3O2 + 4Fe ? 2Fe2O3

H2 + Br2 ? 2HBr

Answers

The reducing agent is the element that is oxidized, which means that it loses electrons. The oxidizing agent is the element that is reduced, which means that it gains electrons.

In some reactions, there may not be a reducing or oxidizing agent identified, in which case neither is the classification for the reactant.

For the given reactions, classify the reactants as the reducing agent, oxidizing agent, or neither are discussed below:

3O2 + 4Fe → 2Fe2O3

In the given reaction, 4Fe is oxidized to Fe2O3, which means that it loses electrons.

Therefore, 4Fe is the reducing agent. 3O2 is reduced to Fe2O3, which means that it gains electrons. Therefore, 3O2 is the oxidizing agent.

H2 + Br2 → 2HBrIn the given reaction, Br2 is reduced to 2HBr, which means that it gains electrons.

Therefore, Br2 is the oxidizing agent. H2 is oxidized to 2HBr, which means that it loses electrons. Therefore, H2 is the reducing agent.

learn more about reducing agent here

https://brainly.com/question/12549467

#SPJ11

consider the stork reaction between cyclohexanone and ethyl propenoate. draw the structure of the product of the enamine formed between cyclohexanone and morpholine.

Answers

the structure of the product of the enamine formed between cyclohexanone and morpholine  required to explain how to obtain the structure of the enamine product. The Stork reaction between cyclohexanone and ethyl propenoate involves the formation of an enamine.

The reaction proceeds as follows Formation of the enamine In this step, the nitrogen atom in morpholine attacks the carbonyl carbon in cyclohexanone to form the enamine intermediate.  Addition of ethyl propenoate The enamine intermediate then attacks the electrophilic carbon in ethyl propenoate to form a new carbon-carbon bond. The intermediate then undergoes hydrolysis to give the final product. The structure of the product of the enamine formed between cyclohexanone and morpholine is shown below of the structure in  the enamine intermediate formed in step 1 of the Stork reaction,

the nitrogen atom in morpholine is attached to the carbonyl carbon in cyclohexanone, forming a new carbon-nitrogen double bond. The enamine intermediate can exist in two possible conformations, the E and Z forms. The E-form is thermodynamically more stable than the Z-form, and therefore, it is the major product. The enamine intermediate then attacks the electrophilic carbon in ethyl propenoate to form a new carbon-carbon bond. The intermediate is protonated to give the final product .In the final product, the morpholine group is attached to the carbon chain through a new carbon-carbon bond.

To know more about structure  Visit;

https://brainly.com/question/32354591

#SPJ11

Of the following substances, only __________ has London dispersion forces as its only intermolecular force.
a. CH3OH b. NH3 c. H2S d. Kr e. HCl

Answers

Of the following substances, only  Kr has London dispersion forces as its only intermolecular force. The correct answer is option (D) Kr.

The weakest type of intermolecular force between nonpolar molecules and noble gases (Ar, He, Kr, Xe) is the London dispersion force. The movement of electrons in one molecule's electron cloud causes a similar movement of electrons in another molecule, resulting in these brief, weak attractive forces. The electrons form temporary dipoles as a result of random movement in the electron cloud, which can be referred to as "dispersing" throughout the cloud.

The properties of noble gases are determined by London dispersion forces in the absence of any other intermolecular force. At room temperature, for instance, the gases helium, neon, argon, krypton, and xenon are all gases.

To know more about London dispersion forces:

https://brainly.com/question/30763886

#SPJ11

calculate the molality of a solution prepared by dissolving 15.9 g of kcl in 750.0 ml of water.

Answers

The given data is Mass of KCl = 15.9g and Volume of water = 750 mlMolality can be defined as the number of moles of solute per kilogram of solvent in the solution. Mathematical representation:Molality= Moles of solute/ Mass of solvent (kg)Since, given Mass of KCl = 15.9 g.

To calculate molality, it is necessary to convert grams of KCl to moles by using its molar mass:2KCl (s) → 2K+ (aq) + Cl- (aq)The molar mass of KCl is 74.5 g/mol.Therefore, the number of moles of KCl can be calculated as:15.9 g / 74.5 g/mol = 0.213 moles of KClThe given volume of water is 750.0 ml.To calculate the mass of the solvent, it is necessary to convert the given volume into kg.

Therefore, the mass of solvent in kg is:mass = volume × densitydensity of water = 1g/mL = 1 kg/LTherefore, the mass of solvent (water) is 0.750 kg.Molality can be calculated by: {tex}\text{Molality= Moles of solute/ Mass of solvent (kg)} {/tex}={tex}\frac{0.213\ mol}{0.750\ kg} {/tex}={tex}\boxed{0.284\ \text{mol/kg}} {/tex}Thus, the molality of the given solution is 0.284 mol/kg.

To know more about Mass visit :

https://brainly.com/question/11954533

#SPJ11

Which one of the following solutions would be the most basic? A) NaCN B) NaNO₂ C) HONH₂ D) H₂NNH₂

Answers

When it comes to basic solutions, the pH of a solution is a measure of how basic or acidic it is. Basic solutions have a pH greater than 7. A stronger base has a higher pH than a weaker base.

To determine which one of the following solutions would be the most basic, we need to find out which of them produces the most OH- ions when dissolved in water.

We will use the following information: HNO2 + H2O ⇌ H3O+ + NO2−HONH2 + H2O ⇌ H3O+ + ONH3H2NNH2 + H2O ⇌ H3O+ + NNH3+NaCN + H2O → Na+ + OH- + HCN.

As you can see, NaCN does not produce any OH- ions, so it cannot be the most basic. NaNO2 produces only a small number of OH- ions since it is a weak base, so it cannot be the most basic either.

HONH2 and H2NNH2 are both stronger bases than NaNO2, but H2NNH2 is the strongest of the three.

This means that the most basic solution would be D) H2NNH2.

To know more about Basic solutions visit:

https://brainly.com/question/3595168

#SPJ11

what is the mass-volume percentage of 30 g of sodium nitrate in 150 ml of solution? your answer should have one significant figure. provide your answer below:

Answers

The mass volume percentage of 30 g of sodium nitrate in 150 ml of solution is 20%. Given Mass of sodium nitrate = 30 g Volume of solution = 150 ml. We know that, Mass-volume percentage = (mass of solute ÷ volume of solution) × 100Substitute the values in the above equation.

Mass-volume percentage = (30 g ÷ 150 ml) × 100 Mass volume percentage = 0.2 × 100 Mass volume percentage = 20%Hence, the mass volume percentage of 30 g of sodium nitrate in 150 ml of solution is 20%. Whenever we say mass or volume of the solution, you need to add the respective masses and volumes of ALL the components of the solution.

Do not commit the error of taking the mass or volume of only the solute or solvent in the denominators of the above expressions. The concentration of a solution is most of the time expressed as the number of moles of solute present in 1 Litre of the solution also called molarity.

To know more about mass visit:

https://brainly.com/question/11954533

#SPJ11

state the conversion factor needed to convert between mass and moles of the atom fluorine

Answers

The conversion factor needed to convert between mass and moles of the atom fluorine is the molar mass of fluorine (F₂).

The molar mass of fluorine is 38.00 g/mol which means that one mole of fluorine weighs 38.00 grams.

When given the mass of fluorine, dividing the given mass by the molar mass of fluorine (38.00 g/mol) will give the number of moles of fluorine present. On the other hand, when given the number of moles of fluorine, multiplying the given number of moles by the molar mass of fluorine (38.00 g/mol) will give the mass of fluorine present. The formula that can be used for this conversion is:n = m / MM

where n is the number of moles, m is the mass, and MM is the molar mass. It is important to keep in mind that the molar mass of any element or compound can be found by summing the atomic masses of all the atoms in the molecule.

learn more about moles here

https://brainly.com/question/15356425

#SPJ11

what volume of a 6.0 solution of ethanol contains 3.0 g of ethanol

Answers

Volume of a 6.0 solution of ethanol that contains 3.0 g of ethanol is 0.50 L. Amount of ethanol (in moles) = 3.0 g / 46 g/mol = 0.0652 mol Volume of solution = Amount of substance (in moles) / Concentration of solution= 0.0652 mol / 6.0 M = 0.0109 L = 10.9 mL

Given ,Amount of ethanol = 3.0 g Concentration of ethanol solution = 6.0 MWe know, Amount of substance (in moles) = Mass of substance / Molar mass of substance Molar mass of ethanol = 46 g/mol.

Amount of ethanol (in moles) = 3.0 g / 46 g/mol = 0.0652 mol Volume of solution = Amount of substance (in moles) / Concentration of solution= 0.0652 mol / 6.0 M = 0.0109 L = 10.9 mL Therefore, volume of a 6.0 solution of ethanol that contains 3.0 g of ethanol is 0.50 L.

To know more about solution visit:

https://brainly.com/question/1416865

#SPJ11

what quantity in moles of precipitate are formed when 25.0 ml of 0.200 m cacl₂ is mixed with excess li₃po₄ in the following chemical reaction? 3 cacl₂(aq) 2 li₃po₄(aq) → ca₃(po₄)₂(s) 6 licl(aq)

Answers

The quantity in moles of precipitate that are formed when 25.0 mL of 0.200 M CaCl₂ is mixed with excess Li₃PO₄ is 1.25 × 10⁻³ mol.

The given balanced equation is:3 CaCl₂(aq) + 2 Li₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6 LiCl(aq)Given that the volume of CaCl₂ is 25.0 mLConcentration of CaCl₂ solution is 0.200 MSo, number of moles of CaCl₂ present in 25.0 mL solution is:0.2 × 25.0 × 10⁻³ = 5.00 × 10⁻³ molNow, the reaction is given as:3 CaCl₂(aq) + 2 Li₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6 LiCl(aq)1 mole of CaCl₂ reacts with 1/3 mole of Ca₃(PO₄)₂So, 5.00 × 10⁻³ moles of CaCl₂ reacts with 5.00 × 10⁻³ / 3 = 1.67 × 10⁻³ moles of Ca₃(PO₄)₂.

However, it is given that the quantity of Li₃PO₄ is in excess.Hence, the number of moles of Ca₃(PO₄)₂ that would be formed would be limited by CaCl₂ and will be 1.67 × 10⁻³ moles.Moles of Ca₃(PO₄)₂ formed = 1.67 × 10⁻³ molMass of Ca₃(PO₄)₂ = number of moles × molar mass= 1.67 × 10⁻³ × 310= 0.5187 gHence, the quantity in moles of precipitate that are formed when 25.0 mL of 0.200 M CaCl₂ is mixed with excess Li₃PO₄ is 1.25 × 10⁻³ mol.

To know more about moles visit:

https://brainly.com/question/15209553

#SPJ11

enter a molecular equation for the gas-evolution reaction that occurs when aqueous hydrobromic acid and aqueous sodium sulfite are mixed.

Answers

When hydrobromic acid and sodium sulfite react, the following gas-evolution reaction takes place:2HBr (aq) + Na2SO3 (aq) → SO2 (g) + 2NaBr (aq) + H2O (l) Hydrobromic acid is a strong acid with the formula HBr, while sodium sulfite is an inorganic salt with the formula Na2SO3.

The aqueous solutions of these two chemicals react in a gas-evolution reaction, resulting in the release of sulfur dioxide gas (SO2). The equation above is the balanced molecular equation for the reaction that occurs.To get the balanced equation, you need to first write the unbalanced equation: HBr (aq) + Na2SO3 (aq) → SO2 (g) + NaBr (aq) + H2O (l).

After balancing the equation, the coefficient for HBr becomes 2, which balances the number of bromine atoms on both sides of the equation.

The coefficients for Na2SO3 and NaBr become 1 and 2, respectively, which balances the sodium and bromide atoms on both sides of the equation. Finally, the coefficient for H2O becomes 1, which balances the hydrogen and oxygen atoms on both sides of the equation.

Hence, the molecular equation for the gas-evolution reaction that occurs when aqueous hydrobromic acid and aqueous sodium sulfite are mixed is 2HBr (aq) + Na2SO3 (aq) → SO2 (g) + 2NaBr (aq) + H2O (l).

To know more about gas-evolution reaction visit:

https://brainly.com/question/28099693

#SPJ11

what is the rate constant of a first-order reaction that takes 430 seconds for the reactant concentration to drop to half of its initial value

Answers

The rate constant of a first-order reaction that takes 430 seconds for the reactant concentration to drop to half of its initial value is 0.001613 s^-1.

A first-order reaction is a chemical reaction that depends only on the concentration of one reactant. In a first-order reaction, the rate of reaction is directly proportional to the concentration of the reactant.

The rate constant (k) for a first-order reaction is the proportionality constant in the relationship between the rate of the reaction and the concentration of the reactant.

For a first-order reaction, the rate constant can be determined using the following equation:t1/2 = ln 2 / kw here t1/2 is the half-life of the reaction, ln is the natural logarithm, and k is the rate constant.

The half-life of a reaction is the time it takes for the reactant concentration to drop to half of its initial value. From the given problem, we know that the reaction is a first-order reaction that takes 430 seconds for the reactant concentration to drop to half of its initial value.

Therefore, we can use the half-life equation to determine the rate constant: k = ln 2 / t1/2k = ln 2 / 430 second sk = 0.001613 s^-1Therefore, the rate constant for the first-order reaction is 0.001613 s^-1.

To know more about  seconds visit:

https://brainly.com/question/24237610

#SPJ11

the sp of iron(ii) carbonate, feco3, is 3.13×10−11. calculate the molar solubility, , of this compound.

Answers

The given solubility product (Ksp) of iron(II) carbonate, FeCO3, is 3.13 × 10⁻¹¹. We need to calculate the molar solubility (s) of this compound.

FeCO3 (s) ⇌ Fe²⁺ (aq) + CO3²⁻ (aq)The solubility product expression for FeCO3 is given as:Ksp = [Fe²⁺] [CO3²⁻]At equilibrium, the concentration of Fe²⁺ and CO3²⁻ ions are equal to the solubility of FeCO3. Let the molar solubility of FeCO3 be s, then:[Fe²⁺] = s M[CO3²⁻] = s M.

Putting these values in the solubility product expression, we get: Ksp = s × s = s²Hence, the molar solubility (s) of FeCO3 can be calculated as:s = sqrt(Ksp) = sqrt(3.13 × 10⁻¹¹) = 5.59 × 10⁻⁶ M Therefore, the molar solubility of FeCO3 is 5.59 × 10⁻⁶ M.

To know more about solubility visit :

https://brainly.com/question/31493083

#SPJ11

A chemical is typically classified as a sensitizer if it causes an allergic reaction after exposure. Based on the SDS information provided, which of the following chemicals used in this lab is most likely classified as a sensitizer ethanol potassium hydroxide benzaldehyde dibenzalacetone Question 10 (1 point) What would happen if the Erlenmeyer flask containing the crude dba in EtOH undergoing recrystallization was moved while still hot directly to the ice bath? Solid would appear more rapidly The solid would contain more impurities The melting range of the solid would be broader All of the above

Answers

Moving the hot Erlenmeyer flask directly to the ice bath during recrystallization would result in all of the above consequences.

What are the possible outcomes if the hot Erlenmeyer flask is transferred directly to the ice bath?

When the hot Erlenmeyer flask is moved directly to the ice bath during recrystallization of the crude dba in EtOH, several consequences can occur simultaneously.

Firstly, the solid would appear more rapidly due to the rapid cooling of the solution, causing the solute to precipitate out faster. However, this rapid crystallization can also lead to the incorporation of impurities into the solid, resulting in a solid that contains more impurities than if the cooling were done gradually.

Additionally, the quick temperature change from hot to cold can lead to a broader melting range of the solid. This is because the rapid cooling can result in the formation of different crystal structures or sizes within the solid, causing variations in the melting behavior.

It is important to note that these consequences are specific to the recrystallization process and the particular compound being handled. The specific details and characteristics of the compound and the recrystallization procedure will determine the extent of these effects.

Learn more about Erlenmeyer flask

brainly.com/question/1851397

#SPJ11

A fatty acid composed of 18 carbon atoms undergoes β-oxidation. How many acetyl CoA, FADH₂, and NADH does β-oxidation of this fatty acid generate? A. 9 acetyl CoA, 8 FADH₂, 9 NADH B. 18 acetyl CoA, 18 FADH₂, 18 NADH C. 9 acetyl CoA, 8 FADH₂, 8 NADH D. 9 acetyl CoA, 9 FADH₂, 9 NADH D. 18 acetyl CoA, 17 FADH₂, 18 NADH

Answers

β-oxidation of an 18-carbon fatty acid will generate 9 acetyl CoA, 8 FADH₂, and 9 NADH. So, the correct option is (A)

What is Beta-oxidation?

The beta-oxidation process involves the breakdown of long fatty acid chains into smaller 2-carbon fragments known as acetyl-CoA. Fatty acids are oxidized to produce acetyl-CoA in the mitochondrial matrix via the beta-oxidation process.The β-oxidation cycle breaks down long-chain fatty acids into acetyl-CoA fragments, which can then be used to generate ATP via the Krebs cycle. During beta-oxidation, the carbon chain of the fatty acid is gradually shortened by two-carbon fragments, each of which yields one acetyl-CoA molecule, as well as NADH and FADH2 as electron carriers.

Learn more about the β-oxidation:

brainly.com/question/7500360

#SPJ11

Suppose that a large farm with a known reservoir of gas beneath the ground sells the gas rights to a company for a guaranteed payment at a rate of 1, 300e ^ (0.03t) dollars per year . Find the present value of this assuming an interest rate of 8 % compounded continuously. The present value is _____

Answers

The present value of the given scenario can be determined by using the formula, PV = FV * e^(-rt), where PV is the present value, FV is the future value, r is the interest rate and t is the time in years.

Given that a large farm with a known reservoir of gas beneath the ground sells the gas rights to a company for a guaranteed payment at a rate of 1, 300e ^ (0.03t) dollars per year and an interest rate of 8% compounded continuously.

PV = FV * e^(-rt)PV = (1300/0.03) * e^(-0.08 * t)PV = 43333.33 * e^(-0.08 * t)The present value is represented by PV. The present value of the given scenario can be determined by using the formula, PV = FV * e^(-rt), where PV is the present value, FV is the future value, r is the interest rate and t is the time in years.

To know more about future value visit :

https://brainly.com/question/30787954

#SPJ11

What is the molar mass of an unknown
hydrocarbon whose density is measured to be 1.34
g/L at STP?
a) 30.0 g/mol
b) 26.8 g/mol
c) 44.5 g/mol
d) 72.17 g/mol
e) 16.4 g/mol

Answers

The molar mass of the unknown hydrocarbon is 1.338 g/mol. Therefore, the correct option is E: 16.4 g/mol.


The molar mass of an unknown hydrocarbon whose density is measured to be 1.34 g/L at STP can be calculated by the following steps:First, calculate the number of moles of the hydrocarbon using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature at STP (273.15 K).

At STP, the pressure is 1 atm, so the equation becomes:1 atm × V = n × 0.08206 L·atm/mol·K × 273.15 Kn = 1 atm × V / (0.08206 L·atm/mol·K × 273.15 K)Next, calculate the mass of the hydrocarbon using its density, which is the mass per unit volume. Since the density is given in g/L, we can use the volume calculated from the ideal gas law (V = nRT/P) to find the mass.m = d × V = d × nRT/P

To know more about hydrocarbon visit:-

https://brainly.com/question/32019496

#SPJ11

Draw the structure with a positively charged carbon.

Answers

A positively charged carbon is referred to as a carbocation. It is a carbon atom that has lost an electron and therefore carries a positive charge.

The carbon atom forms three bonds instead of the usual four, leaving an empty p-orbital. The structure of a carbocation can vary depending on the specific substituents attached to the carbon atom. Here is a general representation of a carbocation:

R1 - C+

|

R2 - R3

In this structure, R1, R2, and R3 represent different substituents or groups attached to the carbon atom. The positive charge is indicated by the "+" symbol next to the carbon atom.

Learn more about carbocation, here:

https://brainly.com/question/31538109

#SPJ4

Which of the following tests can be used to distinguish between two isomeric ketones: 3- pentanone and 2- pentanone? a.I1/Naoh. b.NaSo3H c. HCI d.2,4-DNP

Answers

The 2,4-DNP test can be used to distinguish between the two isomeric ketones because it will form different precipitate with both the ketone compounds.

Isomeric ketones have the same molecular formula but differ in the arrangement of atoms. In the case of 3-pentanone and 2-pentanone, they have the same molecular formula C5H10O but differ in the position of the carbonyl group (C=O). One test that can be used to distinguish between the two is the 2,4-dinitrophenylhydrazine (2,4-DNP) test.

Here is a brief explanation:

2,4-DNP Test - This test is used to detect the presence of a carbonyl functional group (C=O) in a compound. When 2,4-DNP reacts with a carbonyl compound, a yellow-orange precipitate is formed. The test can be used to distinguish between aldehydes and ketones. In the case of 3-pentanone and 2-pentanone, both compounds are ketones, but their carbonyl groups are in different positions. If both are reacted with 2,4-DNP, two different precipitates will be formed. The precipitate formed by 3-pentanone will be different from the one formed by 2-pentanone. Therefore, the 2,4-DNP test can be used to distinguish between the two isomeric ketones.

To learn more about ketones : https://brainly.com/question/23849260

#SPJ11

Other Questions
Suppose that two firms are Cournot competitors. Industry demand is given by: P=200-91-92 where 91 is the output of Firm 1 and q is the output of Firm 2. Both Firm 1 and Firm 2 face constant marginal and average total costs of $20. 1) Solve for the Cournot price, quantity, and firm profits. A stone thrown horizontally from a cliff with an initial speed of 10 m/s hits the bottom of the cliff in 4.3 s. What is the height of the cliff?A projectile is thrown from the top of a tall building Corporation is a form of business organization in which the ownership of the business and management of the business lies in different hands. The owners of the business are known as Stockholders of the business and management of the business lies with the board of directors. Given below is the stem-and-leaf display representing the amount of syrup used in fountain soda machines in a day by 25 McDonald's restaurants in Northern Virginia. 911, 4, 7 100, 2, 2, 3, 8 11/1, 3, 5, 5, 6, 6, 7,7,7 12/2, 2, 3, 4, 8, 9 13|0, 2 If a percentage histogram for the amount of syrup is constructed using "9.0 but less than 10.0" as the first class, what percentage of restaurants use at least 10 gallons of syrup in a day? 24 68 80 88 O None of the above are correct. According to the Sarbanes-Oxley Act of 2002, if an executive receives a bonus higher than that mandated by financial statements, the executive must appear in court o pay the company back O be fined 10-15 percent of his or her salary O be asked to leave the company Maximizing owners' equity value means carefully considering all of the following EXCEPTMultiple Choicehow to best bring additional funds into the firm.which projects to invest in.how best to increase the firm's risk.how best to return the profits from those projects to the owners over time. scientists believe eukaryotic cells originated from two independent bacteria. Omar Company estimates its sales at 190,000 units in the first quarter and that sales will increase by 18,000 units each quarter over the year. They have, and desire, a 25% ending inventory of finished goods. Each unit sells for $25. 40% of the sales are for cash. 70% of the credit customers pay within the quarter. The remainder is received in the quarter following sale. based on the above information, the Production in units for the third quarter should be budgeted as O a. 220,500. O b. 207,000. O c. 274,500. O d. 216,000. O e. None of the answers is correct Hydrogen chloride and oxygen react to form water and chlorine, like this: 4HCI (g)+02(g) 2H2O(g)+2Cl2(g) Suppose a mixture of HCI, O2, H20 and Cl2 has come to equilibrium in a closed reaction vessel. Predict what change, if any, the perturbations in the table below will cause in the composition of the mixture in the vessel. Also decide whether the equilibrium shifts to the right or left perturbation change in composition shift in equilibrium to the right to the left (none) The pressure of HCI will Some 02 is added The pressure of H20 ? to the right to the left (none) The pressure of HCI will Some Cl2 is removed The pressure of O2 will? to the right to the left (none) The pressure of H20 ? The volume of the vessel is reduced The pressure of Cl2 will Not Situation Covered Covered 1. Susan decided to save money by reducing the amount of liability coverage provided by her policy. She carries only the state-minimum required coverage but had an accide What concentration of SO23 is in equilibrium with Ag2SO3(s) and 9.40103 M Ag+ ? The Ksp of Ag2SO3 can be found in this table.Ksp of Ag2SO3 = 1.50x10^-14 fill in the blank .For the reaction given below, H0 = 1516 kJ at 25C and S0 = 432.8 J/K at 25C. This reaction is spontaneous ____. SiH4(g) + 2O2(g) SiO2(s) + 2H2O A long wire carrying a 4.0 A current perpendicular to the xy-plane intersects the x-axis at x=2.0cm. A second, parallel wire carrying a 2.5 A current intersects the x-axis at x=+2.0cm.Part A At what point on the x-axis is the magnetic field zero if the two currents are in the same direction? (in cm)Part B At what point on the x-axis is the magnetic field zero if the two currents are in opposite directions? (in cm) The United States Environmental Protection Agency has defined five tiers of environmental costs. Tie-2 costs are called 'hidden costs' becausethey are hidden in the accounts so that stakeholders are unaware of the potential environmental risks of the firm.they tend to be included in other accounts such as overhead and therefore are not easily identifiable.they cannot be estimated with any degree of certainty.it is not possible to show them in a separate account.they may not be incurred in the future 1. Identify ANY TWO external environmental factors that are interconnected to each other. Explain why they are connected using examples Balance the following redox reaction in acidic solutionS2O3- (aq) + Cl2 (g) -----> SO4-(aq) + Cl-(aq) hot, plastic material of the asthenosphere is most conspicuous at ________. Describe the difference between TTP-A,TTPC-C and CAN communication networks andtheir applications (ie. When would you useeach) the rate constant for a second-order reaction is 0.54 m-1s-1. what is the half-life of this reaction if the initial concentration is 0.27 m? Blue, Inc., produces stereo speakers. The selling price per pair of speakers is $1,000. The variable cost of production is $360 and the fixed cost per month is $49,000.Calculate the contribution margin associated with a pair of speakers. Enter your answers as amounts only with neither commas nor decimals.$In August, the company sold 6 more pairs of speakers than planned. What is the expected effect on profit of selling the additional speakers? Enter your answers as amounts only with neither commas nor decimals.$Calculate the contribution margin ratio for Blue associated with a pair of speakers. Enter your answers as amounts only with neither commas nor decimals.%In October, the company had sales that were $9,100 higher than planned. What is the expected effect on profit related to the additional sales? Enter your answers as amounts only with neither commas nor decimals.