What mass of precipitate (in g) is formed when 85.6 mL of 0.500 M FeCl₃ reacts with excess AgNO₃ in the following chemical reaction? FeCl₃(aq) + 3 AgNO₃(aq) → 3 AgCl(s) + Fe(NO₃)₃(aq)

[Pt(NH3)2ClF] and its mirror image are distinct structures.

To sketch the structures of the distinct isomers of [Pt(NH3)2], we need to consider the arrangement of ligands around the central platinum (Pt) atom in an octahedral geometry. In an octahedral complex, there can be three types of isomers: cis, trans, and facial.

1. Cis-Isomer:

In the cis-isomer, two ligands are adjacent to each other. In the case of [Pt(NH3)2], there are two possibilities for the cis-isomer, where the two NH3 ligands are adjacent to each other while the other two positions are vacant.

  [Pt(NH3)2]

    | |

  [Pt(NH3)2]

2. Trans-Isomer:

In the trans-isomer, two pairs of ligands are opposite to each other. In the case of [Pt(NH3)2], there is only one possibility for the trans-isomer, where the two NH3 ligands are opposite to each other while the other two positions are vacant.

  [Pt(NH3)2]

    | |

  [Pt(NH3)2]

3. Facial-Isomer:

In the facial-isomer, three ligands form a plane around the central Pt atom. In the case of [Pt(NH3)2], there is only one possibility for the facial-isomer, where three NH3 ligands form a plane while the other three positions are vacant.

  [Pt(NH3)2]

    | |

    [Pt]

Now, let's consider [Pt(NH3)2ClF]. It has one additional ligand, Cl, and F compared to [Pt(NH3)2]. The same isomer types (cis, trans, and facial) will still exist, but with different configurations due to the presence of Cl and F.

For example, the cis-isomer can have Cl and NH3 ligands adjacent to each other, and the F ligand opposite to them. The trans-isomer can have Cl and NH3 ligands opposite to each other, with the F ligand opposite to the vacant positions. Similarly, the facial-isomer can have three NH3 ligands in a plane, while the Cl and F ligands occupy the remaining positions.

for more questions on structures
https://brainly.com/question/30459965
#SPJ8

The bond order for this molecular electron configuration is 0.

(1)2(1*)2(2)2(2*)2(2p)4:

In this electron configuration, we have 2 electrons in the bonding molecular orbital (1) and 2 electrons in the antibonding molecular orbital (1*). Similarly, we have 2 electrons in the bonding molecular orbital (2) and 2 electrons in the antibonding molecular orbital (2*). Additionally, there are 4 electrons in the 2p atomic orbital.

To calculate the bond order, we subtract the number of antibonding electrons from the number of bonding electrons and divide the result by 2:

Bond order = [(number of bonding electrons) - (number of antibonding electrons)] / 2

Bond order = [(2 + 2) - (2 + 2)] / 2 = 0

Therefore, the bond order for this molecular electron configuration is 0.

(1)2(1*)2(2)2:

In this electron configuration, we have 2 electrons in the bonding molecular orbital (1) and 2 electrons in the antibonding molecular orbital (1*). We also have 2 electrons in the bonding molecular orbital (2) and no electrons in the antibonding molecular orbital (2*).

Calculating the bond order:

Bond order = [(number of bonding electrons) - (number of antibonding electrons)] / 2

Bond order = [(2 + 2) - 0] / 2 = 4 / 2 = 2

Therefore, the bond order for this molecular electron configuration is 2.

Click the below link, to learn more about bond order:

https://brainly.com/question/10429880

#SPJ11

Yellow color will be observed at 583 nm.Orange color will be observed at 605 nm.Red color will be observed at 691 nm. Wavelength of maximum absorption(λmax)

The wavelength of the maximum absorption of light depends on the energy of the transition and the type of atom that is undergoing the transition.The various colors that would be observed along with their corresponding wavelength are given below:Blue color will be observed at 435 nm.Violet color will be observed at 435 nm.Green color will be observed at 535 nm.

Yellow color will be observed at 583 nm.Orange color will be observed at 605 nm.Red color will be observed at 691 nm.The correct matching of the wavelength of maximum absorption with the color that would be observed is:blue: 435 nmviolent: 435 nmgreen: 535 nmyellow: 583 nmorange: 605 nmred: 691 nm

To know more about Wavelength  visit:-

https://brainly.com/question/31143857

#SPJ11

Nobr is a compound that has Nitrogen (N) in its structure. The number of sigma (σ) bonds that nitrogen (N) has in the NOBr compound is equal to 3.

What is sigma bond? Sigma bond is a type of covalent bond that forms between two atoms by head-to-head overlap of their atomic orbitals.

A sigma bond is a single bond that occurs when one sigma bond is formed between two atoms. A triple bond consists of one sigma bond and two pi (π) bonds between two atoms.

A double bond consists of one sigma bond and one pi (π) bond between two atoms.

Therefore, N atom in the NOBr compound forms three sigma bonds.

To know more about Nitrogen visit:

https://brainly.com/question/16711904

#SPJ11

Oxygen has a lower first ionization energy than both nitrogen and fluorine due to its half-filled p orbital, which makes it more stable.


First ionization energy is the amount of energy required to remove one mole of electrons from one mole of isolated atoms in their gaseous phase. Oxygen has a lower first ionization energy than both nitrogen and fluorine. This is due to its half-filled p orbital, which makes it more stable.

Oxygen has six electrons in its outermost shell, which are distributed in two pairs in the p orbital. Since the p orbital is half-filled, removing one electron from it requires less energy than from nitrogen and fluorine, whose p orbitals are either completely filled or have one less electron. This makes oxygen easier to ionize than nitrogen and fluorine, and explains why it has a lower first ionization energy.

Learn more about ionization energy here:

https://brainly.com/question/28385102

#SPJ11

To calculate the standard entropy change for a reaction from tables of standard entropies.

we use the formulaΔS°rxn = ΣS°products - ΣS°reactantswhere: ΔS°rxn = standard entropy change for the reaction ΣS°products = the sum of the standard entropies of the products ΣS°reactants = the sum of the standard entropies of the reactants. Here are the steps to calculate the standard entropy change for a reaction from tables of standard entropies: Step 1: Identify the products and reactants of the reaction. Step 2: Look up the standard entropies of each product and reactant in a standard entropy table. Step 3: Multiply the standard entropy of each product by the number of moles of that product produced, then add all of these values together. Do the same for the reactants. Step 4: Subtract the sum of the reactants' standard entropies from the sum of the products' standard entropies to find the standard entropy change for the reaction. This value will be in units of joules per kelvin (J/K) or kilojoules per kelvin (kJ/K).

Hence, the standard entropy change for a reaction from tables of standard entropies can be calculated using the above formula and steps.

To know more about standard entropy visit:-

https://brainly.com/question/31663616

#SPJ11

The voltage of the electrochemical cell is given by the difference between the potential of the two half-cells, Ecell = Ecathode - Eanode.

In a standard electrochemical cell, the half-cell potentials are equal to the standard reduction potentials (Eo) for the given redox reaction. However, in the experiment described, the voltage was not equal to the standard reduction potential for the Cu/Zn redox reaction at all times.

This is likely due to a few different factors.First, the initial concentrations of the Cu2+ and Zn2+ ions may not have been exactly 1 M. There could have been slight variations in the actual concentrations of the solutions used, which would result in a voltage that is different from the expected value based on the standard reduction potentials. Additionally, the Cu2+ and Zn2+ ions in solution may have reacted with each other to form other species, which could change the concentration of the ions and affect the voltage of the cell.

To know more about electrochemical visit:-

https://brainly.com/question/31606417

#SPJ11

The energy (in MeV) released in the neutron-induced fission reaction is 19.32 MeV.  The total number of nucleons and total charge are conserved in this reaction.

(a) Given,m(88Kr) = 87.914447 um(144Ba) = 143.922941 u1 u = 931.5 MeV/c2

Let X be the energy released during the reaction.

Therefore, n + 235U → 88Kr + 144Ba + 4n

Initial mass of neutron and 235U = m(n) + m(235U) = (1.008665 u + 235.043928 u) = 236.052593 u

Final mass of 88Kr and 144Ba and 4n = m(88Kr) + m(144Ba) + 4m(n)= (87.914447 u + 143.922941 u + (4 × 1.008665 u))= 236.073348 u

Mass defect, Δm = Initial mass – final mass

= 236.052593 u – 236.073348 u

= –0.020755 u

By Einstein's mass-energy equivalence principle,

ΔE = Δmc2

ΔE = –0.020755 u × (931.5 MeV/c2 / u)

ΔE = –19.32 MeV

The energy released during the reaction is 19.32 MeV.

(b) Let us calculate the total number of nucleons and total charge before and after the reaction.

Initially, the total number of nucleons = number of nucleons in neutron + number of nucleons in 235U

= 1 + 235

= 236

Finally, the total number of nucleons = number of nucleons in 88Kr + number of nucleons in 144Ba + number of nucleons in 4n

= 88 + 144 + (4 × 1)

= 236

Thus, the total number of nucleons is conserved.

Initially, the total charge = charge of neutron + charge of 235U= 0 + 92= 92

Finally, the total charge = charge of 88Kr + charge of 144Ba + charge of 4n

= 36 + 56 + (4 × 0)= 92

Thus, the total charge is also conserved.

Learn more about Einstein's mass energy here:

https://brainly.com/question/15991401

#SPJ11

The frequency of the photon absorbed during the transition from n1 = 2 to n2 = 4 is approximately 6.17 × 10^14 Hz.

The Rydberg equation is given by:

1/λ = R * (1/n1^2 - 1/n2^2)

where λ is the wavelength of the absorbed or emitted photon, R is the Rydberg constant, and n1 and n2 are the principal quantum numbers representing the initial and final energy levels of the hydrogen atom, respectively.

To calculate the frequency (f) of the absorbed photon, we can use the equation:

f = c / λ

where c is the speed of light in a vacuum, approximately 3.00 × 10^8 m/s.

Let's substitute the given values into the equations:

For the Rydberg equation:

1/λ = R * (1/n1^2 - 1/n2^2)

1/λ = (1.096776×10^7 m^−1) * (1/2^2 - 1/4^2)

Simplifying the expression:

1/λ = (1.096776×10^7 m^−1) * (1/4 - 1/16)

1/λ = (1.096776×10^7 m^−1) * (3/16)

1/λ = (3.295328×10^7 m^−1) / 16

1/λ = 2.05958×10^6 m^−1

Now, we can calculate the wavelength (λ) using λ = 1 / (1/λ):

λ = 1 / (2.05958×10^6 m^−1)

λ = 4.85579 × 10^(-7) m

Finally, we can calculate the frequency (f) using f = c / λ:

f = (3.00 × 10^8 m/s) / (4.85579 × 10^(-7) m)

f ≈ 6.17 × 10^14 Hz

Learn more about photon at https://brainly.com/question/15946945

#SPJ11

The given galvanic cell is Cr3+|Cr2+ and H+|H2. In this cell, the oxidation of Cr3+ is taking place at the anode and reduction of H+ is occurring at the cathode. The overall reaction is: Cr3+(aq) + H2(g) → Cr2+(aq) + 2H+(aq)The standard reduction potential of Cr3+ is -0.74 V and that of H+ is 0 V.

1. The anode compartment is the Cr3+|Cr2+ compartment.2. H+ is reduced at the cathode.4. In the external circuit, electrons flow from the Cr3+|Cr2+ compartment to the H+|H2 compartment. Explanation:1. The anode of the galvanic cell is where oxidation takes place and electrons are released. In this case, Cr3+ gets oxidized to Cr2+ and loses two electrons. Hence, Cr3+ is the anode and Cr3+|Cr2+ compartment is the anode compartment.2. H+ is the cathode and gets reduced to H2 and gains two electrons.

Hence, H+ is reduced at the cathode.3. As the cell runs, cations (Cr2+) will migrate from the Cr3+|Cr2+ compartment to the H+|H2 compartment through the salt bridge to maintain electrical neutrality. Anions will migrate in the opposite direction.4. The flow of electrons is from the anode to the cathode in an external circuit. Hence, electrons flow from the Cr3+|Cr2+ compartment to the H+|H2 compartment.5. The cathode is where reduction takes place and electrons are accepted. In this case, H+ gets reduced to H2 and accepts two electrons.

To know more about oxidation visit:

https://brainly.com/question/13182308

#SPJ11

We can see here that the groups of atoms in order of  increasing size, we have:

(a) Ga < As < In

(b) Cl < Al < Tl

(c) Be < Na < Rb

(d) He < Ne < Xe

(e) Li < Na < K

A chemical element is a pure substance that consists of atoms with the same number of protons in their atomic nuclei. Each element is represented by a unique symbol, typically a one or two-letter abbreviation, such as H for hydrogen, O for oxygen, or Fe for iron.

Elements are the fundamental building blocks of matter and cannot be broken down into simpler substances by ordinary chemical means.

Learn more about chemical element on https://brainly.com/question/28376204

#SPJ4

The acetoacetic ester synthesis involves alkylation of the enolate of the acetoacetic ester, followed by ester hydrolysis and decarboxylation of the B-ketoacid. Among the given options, the methyl ketone that is difficult to prepare by this method is [tex]CH_3CCH_2CH_2CH=CH_2[/tex].

The acetoacetic ester synthesis is a useful method for the preparation of methyl ketones. It involves the alkylation of the enolate of the acetoacetic ester, which is formed by the deprotonation of the α-hydrogen of the ester. The resulting alkylated enolate undergoes subsequent ester hydrolysis and decarboxylation of the B-ketoacid, leading to the formation of the desired ketone.

Among the given options, [tex]CH_3CCH_2CH_2CH=CH_2[/tex] is difficult to prepare by this method. This is because the presence of the double bond in this compound makes it less reactive towards alkylation reactions.

The alkylation step requires a strong electrophile to react with the enolate, and the presence of the double bond reduces the electrophilic character of the compound. As a result, the alkylation of the enolate is hindered, making it difficult to form the desired methyl ketone.

Learn more about acetoacetic ester synthesis here:

https://brainly.com/question/31419783

#SPJ11

When Na₃PO₄ is dissolved in aqueous solution, it produces four ions: three Na+ ions and one PO43- ion.

When Na₃PO₄ is dissolved in an aqueous solution, it undergoes dissociation into its constituent ions. Na3PO₄ is composed of three sodium ions (Na+) and one phosphate ion (PO43-). When the compound dissolves, each Na+ ion separates from the PO43- ion, resulting in the formation of four ions in total. Three sodium ions (Na+) and one phosphate ion (PO43-) are produced in the solution. The sodium ions carry a positive charge, while the phosphate ion carries a negative charge due to the loss or gain of electrons during the dissolution process.

Learn more about: Aqueous solution,

brainly.com/question/1382478

#SPJ11

The change in entropy of 73.8 g of neon gas when it undergoes isothermal contraction from 22.6 L to 13.3 L is -69.43 J/K.

Isothermal process is the thermodynamic process that takes place at a constant temperature. In this process, heat is exchanged from the system to the surroundings in order to keep the temperature constant. For an ideal gas, the change in entropy (ΔS) is given by the formula:ΔS = nR ln(V2/V1)Where, n is the number of moles of gas, R is the universal gas constant, and V1 and V2 are the initial and final volumes of the gas respectively.In this problem, the number of moles of neon gas (n) can be calculated as:n = mass/molar mass = 73.8 g / 20.18 g/mol = 3.65 mol

The universal gas constant (R) is 8.314 J/(mol·K). The initial volume (V1) is 22.6 L and the final volume (V2) is 13.3 L. Substituting these values in the formula, we get:ΔS = nR ln(V2/V1)ΔS = 3.65 mol × 8.314 J/(mol·K) × ln(13.3 L / 22.6 L)ΔS = -69.43 J/KThus, the change in entropy of 73.8 g of neon gas when it undergoes isothermal contraction from 22.6 L to 13.3 L is -69.43 J/K.

To know more about neon gas visit:

https://brainly.com/question/23728554

#SPJ11

The concentration of a solution is the amount of solute dissolved in the solvent. In order to calculate the concentration of the sodium acetate solution in table 1 (question 2 above). Answer: The concentration of the sodium acetate solution in table 1 is 0.120 M.

We need to use the formula of Molarity, which is: `Molarity = moles of solute / liters of solution where moles of solute are the number of moles of the solute present in the solution. Here, we have been given the mass of sodium acetate and we need to find the number of moles of the solute present in the solution. We can use the molar mass of the solute for this. The molar mass of sodium acetate is 82.03 g/mol. Hence, number of moles of NaCH3COO present = mass of solute / molar mass of solute= 2.35 g / 82.03 g/mol= 0.0286 mol.

Now, let's calculate the volume of solution. We have been given the mass of the solution which is 249.8 g. We know that density = mass/volume of solution. Hence, volume of solution = mass of solution / density of solution = 249.8 g / 1.05 g/cm³= 237.5 mL= 0.2375 L. Therefore, the concentration of the sodium acetate solution is given by; Molarity = number of moles / liters of solution Molarity = 0.0286 mol / 0.2375 L= 0.120 M

To know more about solution visit:-

https://brainly.com/question/15757469

#SPJ11

The degree of unsaturation for the given formulas is as follows:

(a) C₂₄H₂₄: 36

(b) C₇H₆BrCl: 12

(c) C₉H₁₁N: 12.5

To determine the degree of unsaturation (index of hydrogen deficiency) in a formula, we can use the formula:

Degree of unsaturation = [tex]\[(2n + 2) - \frac{h + x}{2}\][/tex]

where n is the number of carbon atoms, h is the number of hydrogen atoms, and x is the number of halogen atoms (if present).

(a) C₂₄H₂₄:

Degree of unsaturation = [tex]\[(2 \times 24 + 2) - \frac{24 + 0}{2}\][/tex]

                     = 48 - 12

                     = 36

The degree of unsaturation for C₂₄H₂₄ is 36.

(b) C₇H₆BrCl:

Degree of unsaturation = [tex]\[(2 \times 7 + 2) - \frac{6 + 1 + 1}{2}\][/tex]

                     = 14 - 2

                     = 12

The degree of unsaturation for C₇H₆BrCl is 12.

(c) C₉H₁₁N:

Degree of unsaturation = [tex]\[(2 * 9 + 2) - \frac{11 + 0}{2}\][/tex]

                     = 18 - 5.5

                     = 12.5

The degree of unsaturation for C₉H₁₁N is 12.5.

To know more about the degree of unsaturation refer here :

https://brainly.com/question/31745187#

#SPJ11

The value of x is very small compared to 0.0069 and 0.21 so we can consider

(0.0069 - x) = 0.0069 and (0.21 - x) = 0.21.K = [NO][H₂O]/[HNO₂] = (x)(1)/((0.0069)(0.21)) = 2.27 × 10⁻⁴

.Now let us calculate the value of

ΔG.ΔG = - 2811.84 ln K + 0.738 kcal mol⁻¹= - 2811.84 ln (2.27 × 10⁻⁴) + 0.738 kcal mol⁻¹= - 14.53 kcal mol⁻¹= - 14.53 × 4.184 J mol⁻¹= - 60.84 kJ mol⁻¹.

Hence, the value of

δg when [h ] = 6.0×10−2m, [no−2] = 6.9×10−4m

and [hno2] = 0.21 m is - 60.84 kJ mol⁻¹.

Given, [H] = 6.0 × 10⁻²M, [NO₂] = 6.9 × 10⁻⁴M and

[HNO₂] = 0.21

MWe know that,

ΔG° = - RT ln K

where

R = 8.314 J K⁻¹ mol⁻¹ , T = 298 KΔG = ΔG° + RT ln Q

where Q = [NO₂][H₂O]/[HNO₂]

at equilibrium Now let us calculate the value of

Q;Q = [NO₂][H₂O]/[HNO₂] = 6.9 × 10⁻⁴ × 1/ 0.21= 3.28 × 10⁻⁶

Substituting the values,

ΔG = - RT ln K = ΔG° + RT ln Q= - (8.314 J K⁻¹ mol⁻¹ × 298 K) ln K + (8.314 J K⁻¹ mol⁻¹ × 298 K) ln 3.28 × 10⁻⁶= - 2.47 × 10⁴ ln K + 3.09 J mol⁻¹= (- 2.47 × 10⁴/4.184) kcal mol⁻¹ ln K + (3.09/4.184) kcal mol⁻¹= - 5904.06 ln K + 0.738 kcal mol⁻¹

We know that

R = 1.986 cal K⁻¹ mol⁻¹ΔG = - 5904.06 ln K + 0.738 kcal mol⁻¹= - 5904.06 (1.986/4.184) cal mol⁻¹ ln K + 0.738 kcal mol⁻¹= - 2811.84 ln K + 0.738 kcal mol⁻¹

Now we are to determine the value of K

;2 HNO₂(aq) ⇌ NO(g) + H₂O(l)K = [NO][H₂O]/[HNO₂]

Now we have to apply the given equilibrium concentrations to calculate the value of

K;K = [NO][H₂O]/[HNO₂] = ?

So we have to calculate the equilibrium concentration of NO.To calculate the concentration of NO, we must use the following equation for the reaction quotient,

Q;Q = [NO₂][H₂O]/[HNO₂]

where Q = K at equilibrium

K = [NO][H₂O]/[HNO₂]NO₂HNO₂0.0069 M0.21 MΔ0.0069 M- x0.21 M- xxxK = [NO][H₂O]/[HNO₂] = (x)(1)/((0.0069 - x)(0.21 - x))

The value of x is very small compared to 0.0069 and 0.21 so we can consider

(0.0069 - x) = 0.0069 and (0.21 - x) = 0.21.K = [NO][H₂O]/[HNO₂] = (x)(1)/((0.0069)(0.21)) = 2.27 × 10⁻⁴.

Now let us calculate the value of

ΔG.ΔG = - 2811.84 ln K + 0.738 kcal mol⁻¹= - 2811.84 ln (2.27 × 10⁻⁴) + 0.738 kcal mol⁻¹= - 14.53 kcal mol⁻¹= - 14.53 × 4.184 J mol⁻¹= - 60.84 kJ mol⁻¹.

Hence, the value of δg

when [h ] = 6.0×10−2m, [no−2] = 6.9×10−4m and [hno2] = 0.21 m is - 60.84 kJ mol⁻¹.

To know more about compared visit :

https://brainly.com/question/31877486

#SPJ11

The mass/volume percent of the NaCl solution, in which 157 g of NaCl is dissolved in enough water to give a total volume of 1.74 L, is approximately 90.23%.

To calculate the mass/volume percent of a NaCl solution, we need to determine the mass of NaCl and divide it by the volume of the solution, then multiply by 100.

Mass of NaCl = 157 g

Total volume of solution = 1.74 L

Mass/volume percent = (mass of solute / volume of solution) * 100

Let's calculate it:

Mass/volume percent = (157 g / 1.74 L) * 100

Mass/volume percent ≈ 90.23%

Therefore, the mass/volume percent of the NaCl solution is approximately 90.23%.

The mass/volume percent is a measurement used to express the concentration of a solute in a solution. It is calculated by dividing the mass of the solute by the volume of the solution and multiplying by 100.

In this case, we divide the given mass of NaCl (157 g) by the total volume of the solution (1.74 L) and then multiply by 100 to obtain the mass/volume percent.

To read more about mass, visit:

https://brainly.com/question/86444

#SPJ11

The change in entropy when 1 mol of acetonitrile condenses at 297.85 K is 0.102 kJ/(mol.K).T

Given that heat of vaporization of acetonitrile is ΔHvap = 30.5 kJ/molThe change in entropy (ΔS) can be calculated using the following formula:ΔS = ΔHvap / TΔS = 30.5 kJ/mol / 297.85 K = 0.102 kJ/(mol.K)Therefore, the change in entropy when 1 mol of acetonitrile condenses at 297.85 K is 0.102 kJ/(mol.K).

Mathematically, it is represented as:ΔS = ΔH/TWhere,ΔS = Change in entropyΔH = Change in heat energyT = Absolute temperatureThe heat of vaporization of acetonitrile is given as ΔHvap = 30.5 kJ/mol. So, the change in entropy when 1 mol of acetonitrile condenses at 297.85 K can be calculated as follows:ΔS = ΔHvap / TΔS = 30.5 kJ/mol / 297.85 K = 0.102 kJ/(mol.K)

To know more about entropy visit:-

https://brainly.com/question/20166134

#SPJ11

The emission of a photon with the largest energy can be identified using the energy formula for an electron's transition between different energy levels in an atom.

The larger the energy difference between the initial and final energy levels, the larger the energy of the emitted photon. The energy difference between the initial and final energy levels is directly proportional to the frequency and inversely proportional to the wavelength of the emitted photon. Therefore, the larger the frequency or the smaller the wavelength, the larger the energy of the emitted photon.(a) n = 2 to n = 1: ΔE = 2.18 x 10^-18 J - 5.45 x 10^-19 J = 1.64 x 10^-18 J. The frequency of the emitted photon is given by:f = ΔE/h = (1.64 x 10^-18 J)/(6.626 x 10^-34 J s) = 2.47 x 10^15 Hz. The wavelength of the emitted photon is given by:λ = c/f = (2.998 x 10^8 m/s)/(2.47 x 10^15 Hz) = 1.21 x 10^-7 m.(b) n = 3 to n = 1: ΔE = 2.18 x 10^-18 J - 1.36 x 10^-18 J = 8.23 x 10^-19 J. The frequency of the emitted photon is given by:f = ΔE/h = (8.23 x 10^-19 J)/(6.626 x 10^-34 J s) = 1.24 x 10^15 Hz. The wavelength of the emitted photon is given by:λ = c/f = (2.998 x 10^8 m/s)/(1.24 x 10^15 Hz) = 2.42 x 10^-7 m.(c) n = 6 to n = 4: ΔE = 2.18 x 10^-18 J - 4.86 x 10^-19 J = 1.69 x 10^-18 J. The frequency of the emitted photon is given by:f = ΔE/h = (1.69 x 10^-18 J)/(6.626 x 10^-34 J s) = 2.55 x 10^15 Hz.

The wavelength of the emitted photon is given by:λ = c/f = (2.998 x 10^8 m/s)/(2.55 x 10^15 Hz) = 1.18 x 10^-7 m.(d) n = 1 to n = 4: ΔE = 4.36 x 10^-19 J - 2.18 x 10^-18 J = -1.74 x 10^-18 J. This is an absorption process, not emission.(e) n = 2 to n = 4: ΔE = 4.86 x 10^-19 J - 1.64 x 10^-18 J = -1.16 x 10^-18 J. This is an absorption process, not emission.Therefore, the correct answer is (b) n = 3 to n = 1 because it has the smallest wavelength and the highest frequency, and therefore, the largest energy of the emitted photon. The energy formula for this transition is ΔE = 8.23 x 10^-19 J, and the wavelength of the emitted photon is 2.42 x 10^-7 m.

To know more about photon visit:-

https://brainly.com/question/32364752

#SPJ11

The correct nuclear symbol and hyphen notation for the isotope which has a mass number of 28 and atomic number of 14 is: Si-28

The atomic number is the number of protons in an atom, which is equivalent to the number of electrons present in an atom. Silicon is element number 14 on the periodic table, meaning it has 14 protons and 14 electrons. Mass number is the total number of protons and neutrons in an atom.

Since we have the atomic number and mass number, we can figure out how many neutrons an isotope of silicon would have by subtracting the atomic number from the mass number. Thus, to obtain the correct nuclear symbol and hyphen notation for the isotope which has a mass number of 28 and atomic number of 14 is Si-28.

To know more about nuclear symbol visit:

https://brainly.com/question/1398857

#SPJ11

Arachidic acid has 20 carbon atoms.

Therefore, for complete oxidation of arachidic acid to acetyl-CoA, there will be 10 cycles of β-oxidation.

Beta oxidation is the process by which fatty acids are converted to acetyl-CoA.

The cycle of β-oxidation involves four main reactions.

These reactions occur in a cycle.

The four reactions that occur in the beta oxidation cycle are as follows:

Step 1: Dehydrogenation

Step 2: Hydration

Step 3: Dehydrogenation

Step 4: Thiolysis

Arachidic acid is a saturated fatty acid with 20 carbon atoms.

Saturated fatty acids do not have double bonds between carbon atoms; thus, they require one less cycle than unsaturated fatty acids.

Therefore, for complete oxidation of arachidic acid to acetyl-CoA, there will be 10 cycles of β-oxidation.

Learn more about the arachidic acid:

brainly.com/question/31499497

#SPJ11

The metal that will dissolve in HCl (hydrochloric acid) among the options given is "Al" (aluminum).

Aluminum (Al) will dissolve in HCl because it reacts with the acid to form aluminum chloride (AlCl3) and hydrogen gas (H2). The reaction can be represented by the following balanced chemical equation:

2 Al + 6 HCl -> 2 AlCl3 + 3 H2

The other metals listed in the options, such as calcium (Ca), potassium (K), and manganese (Mn), do not readily react with HCl to dissolve. Calcium and potassium are more reactive metals, but they form a protective oxide layer on their surfaces that prevents further reaction with the acid. Manganese is not reactive enough to dissolve in HCl.

Among the given options, only aluminum (Al) will dissolve in HCl to form aluminum chloride and hydrogen gas. Calcium (Ca), potassium (K), and manganese (Mn) will not dissolve in HCl.

Learn more about  hydrochloric ,visit:

https://brainly.com/question/27576431

#SPJ11

In the reverse direction from products to reactants, H3O+ is the acid. In the given reaction, hcn(aq) + h2o(l) ⇌ cn−(aq) + h3o aq. The given reaction is reversible, thus it is a reversible reaction. The reaction is in the forward direction from reactants to products and in the reverse direction from products to reactants.

Hence, we can also write the reaction as cn−(aq) + h3o (aq) ⇌ hcn(aq) + h2o(l)In the forward direction from reactants to products, HCN is the acid and in the reverse direction from products to reactants, H3O+ is the acid. Therefore, in the given reaction.

Hcn(aq) + h2o(l) ⇌ cn−(aq) + h3o (aq). When the reaction goes in the reverse direction (from products to reactants), the acid is H3O+.Hence, the acid in the given reaction when it goes in the reverse direction is H3O+.

To know more about H3O visit:

https://brainly.com/question/27549051

#SPJ11

No, the atoms that make up oxygen are not the same as the atoms of hydrogen. Atoms are made up of protons, are neutrons, and electrons. Each element has a unique number of protons, which determines its atomic number. The main atomic number of oxygen

while the atomic number of hydrogen is  This means that the atoms of oxygen and hydrogen have different numbers of protons in their nuclei. The number of electrons in an atom can vary, but for a neutral atom, the number of electrons is equal to the number of protons. This means that an oxygen atom has 8 electrons, while a hydrogen atom has only 1 electron. The number of neutrons in an atom can also vary, but for a given element, the number of neutrons is usually very close to the number of protons.

Oxygen has several isotopes, which means that the number of neutrons in an oxygen atom can vary.  the most common isotope of oxygen has 8 neutrons, which is the same as the number of protons. Hydrogen has only one isotope, which means that all hydrogen atoms have 1 proton and 0 neutrons. the atoms that make up oxygen and hydrogen are different. Oxygen has 8 protons, 8 electrons, and usually 8 neutrons, while hydrogen has 1 proton, 1 electron, and 0 neutrons. Therefore, the two atoms are chemically different and have different properties.

To know more about atomic  Visit;

https://brainly.com/question/16858932

#SPJ11

The correct answer is to pump an organic electron donor, such as lactate, down to the U6+ to so that iron oxidizing bacteria can further oxidize the uranium to U4+ which is insoluble and unable to move though the groundwater.

In the given scenario, the groundwater contains uranium in the U6+ oxidized state that is soluble and moving in the groundwater towards an aquifer that is used as drinking water for the local community. It is necessary to take steps to stop the migration of uranium and prevent it from reaching the drinking water. The most plausible method is to pump an organic electron donor, such as lactate, down to the U6+ to allow iron-oxidizing bacteria to further oxidize the uranium to U4+. The U4+ is insoluble and unable to move through the groundwater, so the local community's drinking water is protected.

The method of pumping an organic electron donor, such as lactate, down to the U6+ to allow iron-oxidizing bacteria to further oxidize the uranium to U4+ is the most effective and plausible way to prevent the migration of uranium and safeguard drinking water for the local community.

To know more about electron visit:

brainly.com/question/12001116

#SPJ11

The concentration of OH- in the aqueous solution is 1.0 x 10-3 M.

In an aqueous solution, the concentration of hydroxide ions (OH-) can be determined based on the concentration of hydronium ions (H3O+).

The relationship between the two can be expressed using the concept of the pH scale, where pH is defined as the negative logarithm of the H3O+ concentration.

Given that the H3O+ concentration is 1.0 x 10-11 M, we can determine the concentration of OH- using the relationship Kw = [H3O+][OH-]. Kw represents the ion product of water and is equal to 1.0 x 10-14 at 25°C.

Rearranging the equation, we find [OH-] = Kw / [H3O+].

Substituting the values, we get [OH-] = (1.0 x 10-14) / (1.0 x 10-11) = 1.0 x 10-3 M.

Therefore, the concentration of OH- in the aqueous solution is 1.0 x 10-3 M.

Learn more about aqueous solution

brainly.com/question/1382478

#SPJ11

Therefore, the molarity of the NaOH solution is 0.04608 M.

To find the molarity of NaOH solution if 50.0 mL of NaOH solution is required to react completely with 0.47 g KHP, we need to follow a few steps. Here's the long answer that explains how to solve the problem:

Step 1: Write the balanced equation of the reaction

KHP + NaOH → NaKP + H2O

This equation is balanced and shows that one mole of NaOH reacts with one mole of KHP.

Step 2: Calculate the number of moles of KHP

Number of moles of KHP = Mass of KHP / Molar mass of KHP

Molar mass of KHP (Potassium hydrogen phthalate) = 204.22 g/mol

Number of moles of KHP = 0.47 g / 204.22 g/mol = 0.002304 mol

Step 3: Calculate the molarity of NaOH solution

Molarity = Number of moles of solute / Volume of solution in liters

Volume of NaOH solution = 50.0 mL = 50.0/1000 = 0.050 L

Molarity of NaOH solution = 0.002304 mol / 0.050 L = 0.04608 M

To know more about molarity visit:-

https://brainly.com/question/31545539

#SPJ11

If all the eg orbitals are full, it is impossible to promote an electron from the t2g level to the eg level because there are no empty energy states.

The energy of the photon must be sufficient to promote an electron to a higher energy level.2. Draw the crystal field splitting diagram for octahedral Zn^2+ and Ca^2+ complexes. Predict the color of aqueous solutions of Zn^2+ sals and Ca^2+ salts. Does it matter if the complexes are high-spin or low-spin. The crystal field splitting diagram for Zn2+ and Ca2+ are as follows: Zn2+:

It is colorless in both high-spin and low-spin complexes. Ca2+:

In high-spin complexes, it is colorless, but in low-spin complexes, it is purple.

To summarize, the color of Zn2+ complexes is colorless in both high-spin and low-spin complexes. The color of Ca2+ complexes is dependent on the spin-state, being colorless in high-spin complexes and purple in low-spin complexes.

To know more about orbitals visit:

https://brainly.com/question/32355752

#SPJ11

The density of ammonia gas at 2.00 atm pressure and a temperature of 30.0°C is approximately 1.362 g/L.

The density of a gas can be calculated using the ideal gas law equation, which is given by:

density = (pressure * molar mass) / (gas constant * temperature)

The molar mass of ammonia (NH3) is approximately 17.03 g/mol. The gas constant (R) is 0.0821 L·atm/(mol·K).

Now, let's convert the given temperature from Celsius to Kelvin:

T(K) = T(°C) + 273.15

T(K) = 30.0 + 273.15

T(K) = 303.15 K

Using the given values, we can calculate the density:

density = (2.00 atm * 17.03 g/mol) / (0.0821 L·atm/(mol·K) * 303.15 K)

density = 34.06 g / (24.997 L/mol)

density ≈ 1.362 g/L

Therefore, the density of ammonia gas at 2.00 atm pressure and a temperature of 30.0°C is approximately 1.362 g/L.

To know more about density visit:

https://brainly.com/question/26364788

#SPJ11