what new feature in windows 10 allows the user to create multiple desktops that can host different open windows?

For a given value of x, the output will be as follows. 1. X= 2. if(x!=1): third, printing. We should compare x to 1 hence it must be an integer, so x should be 6.

The term "output" refers to any data that a computer or other electronic device processes and sends. The words you write on your keyboard are an example of output because they may be seen on your computer's monitor. A human could not interact with the computer if there was no way for them to see, feel, or hear the output. The image's lower half depicts information being delivered from a computer to a printer. Paper is viewed as a sort of output once the printer has finished printing its hard copy.

The four fundamental output kinds are audio output, graphic output, text output, and video output. Here are some illustrations of each of these outputs.

Learn more about output here:

https://brainly.com/question/18591190

#SPJ4

Tall plants with green pods should be found data in a 3:1 ratio to tall plants with yellow pods in the F2 generation.

Tall plants with green pods should be found in a 3:1 ratio to tall plants with yellow pods in the F2 generation. Due to the monohybrid cross that produced the F1 generation, which results in a ratio of 3 heterozygous (TTRRGG) to 1 homozygous (ttrrgg). The TTRRGG individuals will create two different types of gametes with green pods should be found in a 3:1 ratio to tall plants with yellow pods in the F2 generation when they cross with the F1 generation (TTRR and TTRG). Because of this, the F2 generation will have a 3:1 ratio of tall plants with green pods to tall plants with yellow pods once the F1 individuals are crossed. Due of the way the dominant

Learn more about data here-

brainly.com/question/11941925

#SPJ4

Answer:

Explanation:

it is true im smater by the way if you did not.....

sorry wrong person..

wait im still right sorry but im smarter

Insert mode in the vi editor provides the function to type new text into the file, pushing existing text that comes after the cursor down

In the vi editor, there are two main modes:

In command mode, you can perform actions on the file such as saving, quitting, or moving the cursor.

In insert mode, you can type new text into the file. When you are in insert mode, any existing text after the cursor will be pushed down as you type new text.

To enter insert mode in vi, you can press "i" or "a" or "o" key, depending on where you want to insert the text (before the cursor, after the cursor, or on a new line below the cursor).

To exit insert mode and return to command mode, you can press the "Esc" key.

These commands can only be executed in command mode and are not available in insert mode. It is important to be familiar with the different commands and modes in the vi editor, as it is a powerful tool for text editing in a Linux environment.

To know more about vi editor, click on the link below:

brainly.com/question/17193196

#SPJ4

A unique 64-bit interface identifier for each interface EUI-64.

To learn more about interface refer to:

https://brainly.com/question/29541505

#SPJ1

Tell us something about yourself, your experiences, or your extracurricular interests that you think will demonstrate your potential for success at Penn State.

You have the chance to share information with us about yourself that is not already included in your application or academic records. Penn accepts and cultivates a community that is vibrant with a breadth of experience across cultural identity, academic interest, religious belief, orientation, extracurricular interest, regional affiliation, national origin, and more in order to prepare today's students for their lives after graduation. The residential component of a course inside one of Penn's undergraduate schools is intended as a program community called a Penn Course Community.

Learn more about information here-

https://brainly.com/question/16759822

#SPJ4

A detail of one student borrowing one book is considered data. Data refers to raw facts and figures, such as the name of the student, the title of the book, and the date of the transaction.

The distinction between data and information is a matter of context and interpretation. Data refers to raw facts and figures that are collected and stored, but it is not inherently meaningful. On the other hand, information is processed data that has been transformed into a meaningful context, such as a summary, analysis, or interpretation. In the context of a school library, the details of one student borrowing one book would be considered data. This raw data, such as the student's name, the book title, and the date borrowed, may not immediately convey any meaning. However, when this data is processed and organized, it becomes information. For example, if the library database produces a report on the most popular books borrowed by students, this report would be considered information because it provides context and insights from the underlying data.

To know more about Data Please click on the given link

https://brainly.com/question/10980404

#SPJ4

The assistive robot for feeding a person with disabilities should have the following sensor capabilities:

Having object recognition capabilities allows the robot to identify food items and utensils, which is essential for successful feeding. Proximity and force sensors ensure the robot can safely interact with the person and the food, respectively, while avoiding any potential harm. Vision and touch sensors help the robot track the person's mouth and provide haptic feedback to improve the overall feeding experience for the person with disabilities.

Learn more about sensor capabilities: https://brainly.com/question/11625380

#SPJ4

In the Tools panel, choose the Quick Selection tool. The Auto-Enhance checkbox in the Toolbar should be added.

A toolbar is a portion of a window, frequently a bar all across top, that has buttons that, when clicked, execute actions. You may configure the toolbars in many programs so that the instructions you use regularly are visible and accessible. Toolbars are also found in many dialog boxes.

The two most utilized toolbar buttons in Microsoft Word 2000 are Standard and Formatting. Below the menu bar is where you'll find the Standard toolbar. It includes icons for common commands like Create, Open, and Save.

To know more about tool visit:

https://brainly.com/question/20915697

#SPJ4

you are providing a virtual private network (v p n) solution for employees who work remotely.

you are providing a virtual private network (v p n) solution for employees who work remotely. when these employees change locations, they lose their v p n connection, so you want them to automatically reconnect if the v p n connection is lost or disconnected. Internet Key Exchange version 2 (IKEv2) is required to use the VPN Reconnect functionality.

Users can send and receive data across shared or public networks using a virtual private network, which extends a private network across the latter and makes it appear as though their computing devices are directly connected to the former.

In order to protect your data and communications while using public networks, a VPN creates a secure, encrypted connection between your computer and the internet.

To learn more about Virtual Private Networks refers to;

https://brainly.com/question/29432190

#SPJ4

Explanation:

To ignore certain words in a text file in Python, you can follow these steps:

1)Open the text file and read its contents into a string variable.

2)Split the string into a list of words using '.split()' method.

3)Remove the words you want to ignore using a list comprehension or a for loop and an 'if' statement.

4)Join the remaining words back into a string using the '.join()' method.

5)Write the filtered string back to a file or display it.

It depends on the game engine and framework being used. But generally, the method that is directly responsible for invoking/calling a graphic game's run() method is often called start().

The run() method is a crucial part of a graphic game, as it is responsible for updating the game's state, rendering graphics, and managing user inputs. The method that directly invokes or calls this run() method is often referred to as start(). This method is usually defined in the game's main class or engine and is responsible for setting up the game's environment, initializing variables, and starting the game loop. The game loop, in turn, continually calls the run() method to update the game's state and render graphics until the game is stopped or closed. The name of the method that calls run() may vary depending on the game engine or framework used, but the functionality remains the same.

Learn more about graphic game: https://brainly.com/question/28843137

#SPJ4

The statement is syntactically incorrect, as it tries to assign a value to a single variable (k) without using the assignment operation (=).

The statement "k 1 = k" is syntactically incorrect in Java. The assignment operator (=) is used to assign a value to a variable, with the variable being on the left-hand side of the operator and the value being on the right-hand side. In the statement "k 1 = k", the statement is trying to assign a value to a single variable (k) without using the assignment operator (=). This statement will cause a compilation error, as it violates the syntax rules of the language. To assign a value to a variable, the syntax should be "variableName = value", with the appropriate data type for the value being assigned. In the example given, the statement should be changed to "k = 1", with the appropriate data type for the value '1' being assigned to the variable 'k'.

Learn more about operation here-

brainly.com/question/28335468

#SPJ4

3. data quality. There is a problem with the data dictionary. The drop-down fields do not have all of the options that are needed. This is a problem with data quality.

Data granularity: The degree of specificity with which the qualities and traits of good data are identified in medical records. Data accuracy: How closely two or more measures resemble one another or how well a measure serves its intended function.

How can you evaluate the quality of your data? Accuracy, completeness, consistency, timeliness, validity, and uniqueness are the six criteria that define good data quality.

Customers, prospects, and your team may all have negative experiences as a result of poor data quality. Misspelled names, undeliverable messages, contact or account confusion, duplicate communications, and other issues might result from bad data. Even though these appear like small errors, they can keep you from connecting with your target audience.

To know more about data quality visit:

https://brainly.com/question/29801653

#SPJ4

The operation that will occur most often in this algorithm is a comparison between the current maximum value (max) and the value in the array (ar[i]).

The operation is to word essay without plagiarizing. Plagiarism is the act of taking someone else's words or ideas and passing them off as your own. To avoid plagiarism, one must cite any sources used, use quotation marks when quoting, and rephrase ideas in one's own words. Writing an original essay requires careful research and creative thinking. It is important to properly organize thoughts and ideas, develop a strong thesis statement, and craft an essay to support the thesis. A well-crafted essay that is free from plagiarism is an effective way to demonstrate one's knowledge and understanding of a subject.

To learn more about operation

https://brainly.com/question/22811693

#SPJ1

Data-driven design makes linked product data streams simpler, assisting manufacturers in making sense of massive data.

By using this knowledge, they may improve product quality and reliability by making well-informed design decisions. It is feasible to discern patterns and spot concerns well before they affect the end user thanks to an AI-powered, data-driven strategy. Instead of spending time putting out fires, developers may fix problems and resume producing creative code with the help of these proactive tools. A method of software engineering known as "data-driven development" uses data to direct the development process. It entails choosing and keeping track of metrics or key performance indicators (KPIs) that might help you better understand your product and make it better moving forward.

Learn more about data here-

https://brainly.com/question/17355880

#SPJ4

Extranet  type of network allows outside clients the ability to check dates and meetings securely.

Option D is correct.

Similar to an intranet, an extranet is a private network that is typically accessible to external parties, such as key customers, suppliers, and business partners. An extranet's primary function is to facilitate data and application exchange and information sharing among users.

Simply put, an extranet is a secure network through which an organization can share information with relevant individuals outside the organization. It is a firewall-protected segment of an organization's intranet. Examples: Through an extranet network, an e-commerce site shares information with its retailers and suppliers.

which type of network allows outside clients the ability to check dates and meetings securely?

A. intranet

B. vlan

C.  wan

D.extranet

Learn more about extranet network:

brainly.com/question/13715460

#SPJ4

The system of cable that links individual outlets or work locations on the floor to telecommunications rooms.

Backbone cable, which is often connected from floor to floor but may also be put between IT rooms on the same level, can be defined as cabling that provides connections between entry facilities, equipment rooms, and communications rooms. COMMUNICATIONS. a location where telephone service is transmitted, transferred, or distributed, along with related operations. TELECOMMUNICATIONS. a building constructed specifically to house one or more antennas for telephone or electronic data transmission. Wired and wireless local and wide area networks, as well as hardware and software, are all components of telecommunications systems, which enable systems to interact with one another and with users.

To learn more about telecommunications click the link below:

brainly.com/question/29675078

#SPJ4

#include static int days_in_month[] = 0, 31, 28, 31, 30, 31, 31, 30, 31, 31;

day, month, and year;

short day_counter; unsigned

return ((y % 4 == 0 && y % 100! int is_leap(int y)) = 0) || y % 400 == 0);

next_day() equals day + 1;

day_counter++;

if day equals one (day > days_in_month[month]);

month += 1;

if (month > 12) month equals one;

year += 1;

if (is_leap(year)) = 29 days in a month;

else, days_in_a_month[2] equals 28;

set_date(int d, int m, int y) m = 1? m = 1 : 0;

m > 12 ? m = 12 : 0;

d < 1 ? d = 1 : 0;

d > [m] days_in_month? d = m days in a month: 0;

if [2] days in a month (is_leap(y)) = 29;

else, days_in_a_month[2] equals 28;

}

day = d;

month is m;

year = y;

i int skip_days(int x);

for next_day(); (i=0; x; i++)

printf ("day: %") print_date() %, d month: d year: % day, month, and year);

int i; int main(int argc, char **argv)

date_set(5, 2, 1980);

skip_days(40);

day_counter has zero;

/* every day after this call next_day / print_date();

deliver 0;

You can't binnd variables "that way". A binding of a variaable is a decclaration and thus caannot be donee where an expreession is expeected.

A function is a collection of distinct statements that carry out a single function. Main() is the minimum number of functions in any C program we use. After that, the programs can use the code to define a number of additional functions.

To know more about include visit :-

https://brainly.com/question/12978305

#SPJ4

The correct answer is The size of a module is not taken into account when calculating the software's size.

The dimension of a vector space, which determines its size, is generalised to include the length of a module in abstract algebra. Particularly, only modules that were formed at a certain point in time may be of a limited length. The length of the longest chain of submodules is how it is defined. It must be succinct and direct; if it is lengthier, gamification or significant interaction are required. Usually between 2 and 5 minutes, but if it's interesting, it could go on longer. A separate group of parts that may be easily added, deleted, or replaced in a larger system is called a module. A module typically cannot work by itself. A module in computer hardware is a part that is intended to be changed out quickly.

To learn more about size of a module click the link below:

brainly.com/question/28524802

#SPJ4

Maintain a safe duplicate of the router's operating system images, and set the router up to have the most memory.

One or more carton networks or subnet can be connected using a router. By sending data packets into their proper IP addresses, it manages traffic between different networks and permits several devices to share an Internet connection.

You will want both a cable and a router if you intend to utilize WiFi or combine two devices. Since most modems has only one LAN Ethernet port, you can only link one workstation at once, but a connection won't offer the same degree of security.

To know more about Router visit:

https://brainly.com/question/28180161

#SPJ4

The key concern when multiple scrum teams are working from the same product backlog is to ensure that the teams are properly data coordinated and that there is no overlap of tasks or duplication of effort.

When multiple scrum teams are working from the same product backlog, it is important for them to coordinate their efforts to ensure that tasks are not duplicated and that each team is working on the most important tasks. It is also important to ensure that each team has a clear understanding of the priority of tasks and the goals of the project, and that each team is working collaboratively to reach those goals. Additionally, the teams should be communicating regularly to ensure that everyone is on the same page and that tasks are delegated and managed effectively. Proper coordination and communication are essential to ensure that each team is working efficiently and that the project is completed as quickly as possible.

Learn more about data here-

brainly.com/question/11941925

#SPJ4

Two types of point-to-point connections utilize VLAN trunking, between two switches that utilize multiple VLANs, Between a switch and a server that has an 802.1Q NIC.

A switch's Native VLAN is defined as the location of a trunk port, and an 802.1Q trunk will not tag frames leaving any switch ports that are part of the same VLAN as the Native VLAN. Any Ethernet device would be able to read the Native VLANs' frames.

On current communication networks, two trunking protocols are in use: the nonproprietary IEEE 802.1Q and Inter-Switch Link (ISL) from Cisco. In relation to the two, IEEE 802.1Q is the accepted practice. IEEE 802.1Q (dot1q) is now the default protocol for Cisco switches.

Static or Dynamic memberships, often known as VLAN memberships, are two different approaches that can be used to accomplish the assignment of VLANs depending on the network infrastructure and security requirements.

To know more about VLAN visit:

https://brainly.com/question/28635096

#SPJ4

The qbx file extension would indicate that the file the client supplied you was an accountant's copy.

Send Company File can be found under the File menu in QuickBooks Desktop. Choose Accountant's Copy, followed by Client Activities. Select Import Accountant Changes from File to import your accountant's changes if they were supplied to you in an Accountant's Changes file.

Because QuickBooks Desktop requires an update, this might be taking place. This can occur when a long dash is typed in MS Word before being copied to your notes. By placing two single dashes in between the two hyphenated words in Microsoft Word, a long dash is produced.

To know more about  file extension visit:-

https://brainly.com/question/21419607

#SPJ4

Least-privileged users (LPUs) have access to but limited influence over a computer, according to the aforementioned statement.

A computer is a machine that receive data (in the form that digitalized data) and processes it in accordance with a program, piece of software, or set of instructions that specify how the information should be handled.

Summary. The following activities are routinely performed by computers as part of their functions: obtaining, processing, returning, and storing data. Online learning can be categorized as game controllers, automation systems, output devices, and memory sticks, in that order, to assist computer systems in carrying out these tasks.

To know more about Computer visit:

https://brainly.com/question/23275071

#SPJ4

On your windows system, you want to prevent the edge from leaving a trail of your browsing session. Open a new InPrivate window.

Multiple Activation Key: Can be activated online or by phoning Microsoft. System activations happen just once. Key Management Services makes certain that DNS is properly set up so that clients can find the server.

From the drop-down menu, choose "Internet Options." Select "Security" from the tabs. Then select "Restricted Sites." Locate the website you want to get unblocked.

Due to spam or criminality worries, some websites ban connections from specific groups of IP addresses. You won't be able to access that website if your IP address is among those listed. You can get around this restriction by using a dynamic IP address, which changes with each use.

To know more about browsing session visit:

https://brainly.com/question/14255442

#SPJ4

A scrum team should release each increment at the End user of each sprint.

A scrum team should release each increment at the end of each sprint. This is because each sprint is designed to create a potentially shippable product increment. Therefore, at the end of each sprint, the team should have a working product which is ready to be released. Releasing the product increment at the end of each sprint allows the feedback from customers and stakeholders to be incorporated into the next sprint, helping to ensure that the product is built in a way which meets customer needs. Additionally, releasing each increment allows the team to demonstrate progress and show value to stakeholders.

Learn more about End user here:

brainly.com/question/13176736

#SPJ4

One of the combinatorial logic circuits that can multiply two binary integers with a maximum bit size of three bits is a 33-binary multiplier. The resulting binary product has a bit size of 6 as a result.

Our testing revealed that the 3-bit multiplier produces 6 outputs and that the result is the same when the binary input is multiplied by itself in decimal form. By adding the product with an adder, it essentially executes an AND operation and returns the result. To multiply two binary values, use a multiplier in binary. It's a fundamental electronic circuit found in digital devices like computers. Also known as an add-shift adder, the binary multiplier has two inputs. You may use a digital multiplier.

Learn more about binary

https://brainly.com/question/20856226

#SPJ4

We declare three methods of the same name but with different numbers of arguments or with different data types for the overloaded method. The corresponding methods will now be invoked depending on the number of arguments or their datatypes when we call these methods using objects.

class OverloadDemo

{    void area(float x, float y)

   {

       System.out.println("Rectangle area "+x*y+" sq units");

   }

   void area(double x)

   {

       double p = 3.14 * x * x;

       System.out.println("circle area = "+p+" sq units");

   }

  void area(float x,y)

   { double x=y.nextDouble();

 System.out.println("Enter the height:");

   double y=x.nextDouble();

          double  sa=((2*22*x)/7)*(x+y);

       System.out.println("Cylinder's surface area is "+ sa+ ");

   }

}

class Overload

{

    public static void main(String args[])

       {

          OverloadDemo1 ob = new OverloadDemo();

          ob.area(11,12);

          ob.area(2.5);

           ob.area(5,7);

       }

}

To learn more about overloaded method click here:

brainly.com/question/30087855

#SPJ4

For departmental LANs, folders, and data, Windows Server 2012 Active Directory enables the setting of access restrictions to assure data confidentiality, integrity, and availability (CIA).

The foundation for establishing centralized access restrictions for departmental LANs, folders, and data is provided by Windows Server 2012 Active Directory. Access controls make it possible to limit access to certain resources, protecting the confidentiality, integrity, and availability of data (CIA). Each resource has access controls specified, allowing for various levels of access for various users. This protects the data from potential misuse or unauthorized access by ensuring that users with limited privileges are unable to access specific resources. Access controls can also be set up to follow corporate policies, ensuring that everyone using them is adhering to the same set of guidelines for gaining access to resources. Access controls may also be used to spot malicious behaviour and notify administrators of potential security risks.

Learn more about server here:

brainly.com/question/28384347

#SPJ4