The direction of heat flow is increased which means blocks temperature is higher and hotter than it was before
A technical machinist is asked to build a cubical steel tank that will hold "265" L of water. Calculate in meters the smallest possible inside length of the tank. Round your answer to the nearest .
Answer:
0.64 m
Explanation:
Given that;
1L = 0.001 cubic metre
Then;
263 L = 263 L × 0.001 cubic metre/1L
= 0.263 cubic metre
Volume of a cube = l^3
l= 3√V
l= 3√0.263 cubic metre
l= 0.64 m
17. The density of a population would influence which limiting factor?
O niche
O growth rate
O weather
O space
Answer:
The answer is growth rate
Explanation:
it will help you
An object was measured by a worker as 14.6cm long, however, the manufacturer specifications list the length of the object at 14.4cm. What is the percent error in the worker's measurement? A. 1.39%
B. 1.37%
it's 0.2cm different from the expected value, wich was 14.6cm
how many percent that are is calculated in the screenshot.
rounded it's 1.37%
define the following terms atom
find out the equivalent weight of Ca(OH)2
Answer:
The equivalent weight of calcium hydroxide is 1/2 he mass of a mol of calcium hydroxide. 1 mol Ca(OH)2 = 74 grams Ca(OH)2 ; 1 equivalent Ca(OH)2 = 37 grams Ca(OH)2......
Explanation:
HOPE IT HELPS YOU
A 25.0 mL sample of a saturated C a ( O H ) 2 solution is titrated with 0.029 M H C l , and the equivalence point is reached after 37.3 mL of titrant are dispensed. Based on this data, what is the concentration (M) of the hydroxide ion?
Answer:
0.043 M
Explanation:
The reaction that takes place is:
Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂OFirst we calculate how many HCl moles reacted, using the given concentration and volume required to reach the equivalence point:
0.029 M HCl * 37.3 mL = 1.0817 mmol HCl = 1.0817 mmol H⁺As 1 mol of H⁺ reacts with 1 mol of OH⁻, in the 25.0 mL of the Ca(OH)₂ sample there are 1.0817 mmoles of OH⁻.
With that in mind we can calculate the hydroxide ion concentration in the original sample solution, using the calculated number of moles and given volume:
1.0817 mmol OH⁻ / 25.0 mL = 0.043 MThe titration is termed the neutralization reaction with the acid and base. The concentration of hydroxide in the titration is 0.0865 M.
What is a neutralization reaction?The neutralization reaction is given as the reaction in which the acid and base react to form the salt and water, stabilizing the pH of the solution.
The neutralization of acid and base to identify the strength can be given as:
[tex]\rm M_V_1=M_2V_2[/tex]
Substituting the strength and the volume of calcium hydroxide and the HCl with the volume:
[tex]\rm 0.029\;M\;\times\;37.3\;mL=M_2\;\times\;25\;mL\\M_2=\dfrac{ 0.029\;M\;\times\;37.3\;mL}{25\;mL} \\M_2=0.0432\;M[/tex]
The strength of the calcium hydroxide in the reaction is 0.04326 M.
One molar unit of calcium hydroxide results in 2 molar units of hydroxide. The molar unit of hydroxide in 0.04326 M calcium hydroxide is:
[tex]\rm 1\;M\;Ca(OH)_2=2\;M\;OH^-\\\\0.04326\;M\;Ca(OH)_2=0.04326\;\times\;2\;M\;OH^-\\0.04326\;M\;Ca(OH)_2=0.0865\;M\;OH^-[/tex]
The concentration of hydroxide ion in the titration is 0.0865 M.
Learn more about molarity, here:
https://brainly.com/question/12127540
Suppose an enzyme and its substrate obey the lock and key model of enzyme catalysis. Which of the following would be true of the enzyme?
a. only one substrate could be converted to product by the enzyme
b. the active site of the enzyme must be rigid
c. the entire enzyme must be rigid
d. the active site of the enzyme must be flexible
e. the enzyme could bind different substrates if the substrates shared a common motif somewhere in their structures
Answer:
only one substrate could be converted to product by the enzyme
Explanation:
If an enzyme obeys the lock and key model, it then follows that the design of the enzyme is unique to a particular substrate.
Just as only the correct key can effectively fit into a lock, only the appropriate substrate whose design matches that of the enzyme can fit into the enzyme.
Owing to the lock and key model of enzyme activity, only one enzyme could interact with a substrate to yield particular product.
important of organic chemistry in our daily life
Answer:
Human life has become very simple by using organic chemicals. The importance of organic chemicals in the daily life and industrial area can be explained as follows. (i) Food Vitamins, proteins, sugar, flour, fats etc. ... (ii) Agriculture is an important place for organic chemical for the growth of agricultural production.
Which statement is about population density
Explanation:
Population density is defined as the number of people present per square kilometre. Population density of India according to 2011 census is 382 persons per square kilometres.
I need help with the practice question at the bottom. Thank you.
As the gas expands on the surrounding, work is done by the system.
Therefore, W= -279J
Absorbtion of heat,q= +216J
∆U=q+W = (216-279)J= -63J
The equilibrium constant (K p) for the interconversion of PCl 5 and PCl 3 is 0.0121:
PCl5 (g) → PCl3 (g) + Cl2 (g)
A vessel is charged with PCl 5 giving an initial pressure of 0.123 atm and yields PCl 3 and Cl 2. At equilibrium, the partial pressure of PCl 3 is ________ atm.
A) 0.0782.
B) 0.0455.
C) 0.0908.
D) 0.0330.
E) 0.123.
Answer: At equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
Explanation:
The partial pressure of [tex]PCl_{3}[/tex] is equal to the partial pressure of [tex]Cl_{2}[/tex]. Hence, let us assume that x quantity of [tex]PCl_{5}[/tex] is decomposed and gives x quantity of [tex]PCl_{3}[/tex] and x quantity of [tex]Cl_{2}[/tex].
Therefore, at equilibrium the species along with their partial pressures are as follows.
[tex]PCl_{5}(g) \rightarrow PCl_{3}(g) + Cl_{2}(g)\\[/tex]
At equilibrium: 0.123-x x x
Now, expression for [tex]K_{p}[/tex] of this reaction is as follows.
[tex]K_{p} = \frac{[PCl_{3}][Cl_{2}]}{[PCl_{5}]}\\0.0121 = \frac{x \times x}{(0.123 - x)}\\x = 0.0330[/tex]
Thus, we can conclude that at equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
D
Question 2
1 pts
How many moles of carbon tetrachloride are present in
18.Og of CC14?
i think .117018
now to get to the 20charaeactrs minimum.
What is the amount of solute required if the solution is 50 ml and the solvent is 35 ml. Solve and explain
I don’t know what to do
Answer:
15 mL of the solute
Explanation:
From the question given above, the following data were obtained:
Solution = 50 mL
Solvent = 35 mL
Solute =?
Solution is simply defined as:
Solution = solute + solvent
With the above formula, we can easily obtain the solute in the solution as follow:
Solution = 50 mL
Solvent = 35 mL
Solute =?
Solution = solute + solvent.
50 = solute + 35
Collect like terms
50 – 35 = solute
15 = solute
Solute = 15 mL
Therefore, 15 mL of the solute is required.
The blank is the accepted form of gathering and reporting information within the science community.
Answer:
Scientific method.
Explanation:
Scientific method is the way taken to acquire scientific knowledge. It includes experiments, statistical analysis of existing data, and all kinds of observations of the world around us, while theoretical research is based on deriving certain theories about the world from basic principles, in a mathematical or logical way. The scientific method applies to both types of research, and emphasizes that scientific research is objective, that it can be verified by other scientists, and that knowledge is not acquired without context, but in a way that leads to a greater understanding of previous research and the world. we live in. To contribute to this, researchers are expected to clearly record both their findings and the methods they use to arrive at the results.
Which probing question lies within the scope of physics?
O A.
Are fish in the open ocean
attracted by underwater sounds?
O B.
Does increasing the saltiness of
ocean water affect the speed
of sound in the water?
O C.
What effect does the release of industrial wastewater have on
the acidity of oceans?
D. What is the effect of rising sea temperatures on
ocean currents?
Answer:
answer number C is the correct answer for this
Green plants use light from the Sun to drive photosynthesis, a chemical reaction in which liquid water and carbon dioxide gas form aqueous glucose (CH1206) and oxygen (O2) gas. Calculate the moles of glucose produced by the reaction of 2.40 mol of carbon dioxide. Be sure your answer has a unit symbol, if necessary, and round it to 3 significant digits.
Answer:
.
Explanation:
Calculate the percent dissociation of benzoic acid C6H5CO2H in a 1.3M aqueous solution of the stuff. You may find some useful data in the ALEKS Data resource. Round your answer to 2 significant digits.
Answer:
the percent dissociation is 0.69 %
Explanation:
Given the data in the question;
benzoic acid C₆H₅CO₂H
C₆H₅COOH[tex]_{(aq)[/tex] ⇔ C₆H₅COO[tex]_{-(aq)[/tex] + H[tex]_{+(aq)[/tex]
Ka = [C₆H₅COO- ][ H+ ] / [ C₆H₅COOH ] = 6.28 × 10⁻⁵
given that it dissociated in a 1.3 M aqueous solution.
so Initial concentration is;
[ C₆H₅COOH ] = 1.3
[C₆H₅COO- ] = 0
[ H+ ] = 0
Change in concentration
[ C₆H₅COOH ] = -x
[C₆H₅COO- ] = +x
[ H+ ] = +x
Concentration equilibrium
[ C₆H₅COOH ] = 1.3 - x
[C₆H₅COO- ] = +x
[ H+ ] = +x
Hence,
x² / ( 1.3 - x ) = 6.28 × 10⁻⁵
6.28 × 10⁻⁵( 1.3 - x ) = x²
8.164 × 10⁻⁵ - 6.28 × 10⁻⁵x = x²
x² + 6.28 × 10⁻⁵x - 8.164 × 10⁻⁵ = 0
solve for x
ax² + bx - c = 0
x = [ -b ± √( b² - 4ac ) ] / [ 2a ]
we substitute
x = [ -6.28 × 10⁻⁵ ± √( (6.28 × 10⁻⁵)² - (4 × 1 × -8.164 × 10⁻⁵ ) ) ] / [ 2 × 1 ]
x = [ -6.28 × 10⁻⁵ ± 0.01807 ] / [ 2]
x = [ -6.28 × 10⁻⁵ - 0.01807 ] / [ 2] or [ -6.28 × 10⁻⁵ + 0.01807 ] / [ 2]
x = -0.0090664 or 0.0090036
so x = 0.0090036
hence
[ H+ ] = +x = 0.0090036 M
[C₆H₅COO- ] = +x = 0.0090036 M
Initial concentration of [ C₆H₅COOH ] = 1.3 M
concentration of C₆H₅COOH dissociated = 0.0090036 M
percent dissociation of C₆H₅COOH will be;
⇒ ( 0.0090036 M / 1.3 M ) × 100 = 0.69 %
Therefore, the percent dissociation is 0.69 %
What evidence supports the law of conservation of energy?
Light energy is converted to chemical energy during photosynthesis.
Oxygen is made from the breakdown of carbon dioxide during photosynthesis.
Energy is absorbed by chlorophyll during photosynthesis.
The sun gives off light energy that is absorbed by plants.
Answer:
light energy is converted to chemical energy during photosynthesis.
Explanation:
Law of conservation of energy says: Energy can neither be created nor destroyed-only converted from one form of energy to another.
Answer:
A. Light energy is converted to chemical energy during photosynthesis.
The following data were obtained using the same procedure as in your experiment. Using these data, calculate the percent malachite in the sample.
FW information (in g/mol): malachite = 221.11; CO2 = 44.01; H2O = 18.02
Mass of crucible: 23.8839 g Mass of crucible + sample: 26.0496 g
Mass of crucible + decomposed sample: 25.7013 g
One molecule of malachite decomposes to make:_______.
___________molecule(s) of copper oxide
___________molecule(s) of carbon dioxide
____________molecule(s) of water
a. 1, 2,2
b. 2, 1, 1
c. 1, 1, 1
d. 1,0.5, 0.5
Answer:
c
Explanation:
Does Every Chemical Have a formula?
Yes.
Each chemical substance has a specific chemical composition, so these chemical substances have their own chemical formula.
I hope this helps!
A piece of solid tin is submerged in silver nitrate solution a reaction occurs producing tin(IV) nitrate solution and solid silver
Write a word equation write a skeleton equation write a balanced chemical equation
Answer:
Tin + silver trioxonitrate V -------->Tin IV nitrate + silver
Explanation:
The term word equation refers to an equation in which the reactants and products are written in words rather than chemical symbols.
Note than tin is above silver in the electrochemical series hence silver will be displaced by tin as follows;
Tin + silver trioxonitrate V -------->Tin IV nitrate + silver
Calculate the average atomic mass for X
Answer:
39.0229 amu
Explanation:
Hello there!
In this case, according to given information, the idea here is to multiply the percent abundance by the mass number of each isotope and then add them all together as shown below:
[tex]=0.0967*38+0.7868*39+0.1134*40+0.0031*41\\\\=3.6746+30.6852+4.536+0.1271\\\\=39.0229amu[/tex]
Regards!
she goes away change to negative form
She goes away.
Negative
She doesn't go away.
mass of exactly 1 mole of arsenic
Answer:
The average mass of one atom of arsenic is 74.92 amu, and the mass of one mole of arsenic atoms is 74.92 grams.
The mass of one mole of arsenic atoms is 74.92 grams.
Calculation,
Mass of one mole of arsenic = Mass of 1 arsenic atom × [tex]N_{A}[/tex]
Where, [tex]N_{A}[/tex] = Avogadro's number = 6.022 × [tex]10^{23}[/tex]
Mass of one arsenic atom = 74.921 u
One u = 1.66 × [tex]10^{-27}[/tex] kg
And,
Mass of one mole of arsenic atom = 6.022 ×[tex]10^{23}[/tex] × 74.921 × 1.66 × [tex]10^{-27}[/tex]×[tex]10^{3}[/tex] kg
Mass of one mole of arsenic atom = 74.92 [tex]gmol^{-1}[/tex]
What is molar mass?The mass of one mole of a substance in grams is called molar mass.The unit is [tex]gmol^{-1}[/tex].To learn more about molar mass,
https://brainly.com/question/12127540
#SPJ2
CAN YOU PLEASE HELP ME
When Pt electrodes are used in the electrolysis of Kl(aq), a number of reactions are possible at the electrodes. Using a standard reduction potentials table predict which reaction is most likely to occur at the anode
anode is oxidation
so look at the reduction potential for Pt and Kl
the one with the smaller reduction potential will undergo oxidation
the one with the larger reduction potential will undergo reduction
you have to flip the equation that undergoes oxidation because the reduction table always gives reduction equations
Voltages listed in textbooks and handbooks are given as standard cell potentials (voltages). What is meant by a standard cell?
Answer:
Find the definition below.
Explanation:
A standard cell is a group of transistors that have a regular electromotive force flowing through them. They follow either the boolean function or the storage function. A technology library that is made up of a collection of standard cells can be used to facilitate the placement, routing, and synthesis of the Application-specific Integrated Circuit (ASIC).
Electronic Design Automation is an example of an apparatus that implements this functionality.
For the following reaction, 11.6 grams of sulfur are allowed to react with 23.8 grams of carbon monoxide .
sulfur(s) + carbon monoxide(g) sulfur dioxide(g) + carbon(s)
What is the maximum amount of sulfur dioxide that can be formed?
What is the formula for the limiting reagent?
What amount of the excess reagent remains after the reaction is complete?
Answer:
S + 2CO = SO2 + 2C
First, look for the amount of substance of sulfur:
n(S) = m / M
n(S) = 14.8 g/32 g / mol = 0.4625 mol
n(CO) = m (CO) / M (CO)
M(CO) = 12 + 16 = 28 g/mol
n(CO) = 19.9 g/28 g/mol = 0.71 mol
S in excess, so for calculating we take CO:
n(SO2) = n(CO)/2 = 0.71 mol/2 = 0.355 mol
m(SO2) = M(SO2)*n(SO2)
M(SO2) = 32 + 16*2 = 64 g/mol
m(SO2) = 64 g/mol * 0.355 mol = 22.74 g
Copper reacts with sulfuric acid to yield copper(II) sulfate, water, and sulfur dioxide.
a. True
b. False
Answer:
B. False
Explanation:
Water does NOT react too copper. Copper does not react with water because the oxygen in water is locked into a compound with one part oxygen and two parts hydrogen. Copper oxide is a compound from the two elements copper and oxygen. Everything else listed does but since water is on this list it is false.
A chemist measures the energy change
ΔH during the following reaction:
2NH3(g)→N2(g)+3H2(g)
ΔH=160kJUse the information to answer the following questions.This reaction is:__________.
a. endothermic
b. exothermic
Suppose 70.9 g of NH3 react. Will any heat be released or absorbed?
a. Yes, absorbed
b. Yes, released
c. No.
If you said heat will be released or absorbed in the second part of this question, calculate how much heat will be released or absorbed. Round your answer to 3 significant digits.
Answer:
For (1): The correct option is (a)
For (2): The correct option is (a) and 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts.
Explanation:
There are 2 types of reactions that are classified based on enthalpy change:
Endothermic reactions: These are the reactions where heat is absorbed by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is positive for these reactions.
Exothermic reactions: These are the reactions where heat is released by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is negative for these reactions.
For (1):For the given chemical reaction:
[tex]2NH_3(g)\rightarrow N_2(g)+3H_2(g);Delta H=160kJ[/tex]
As the change in enthalpy or heat of the reaction is positive. Thus, the reaction is an endothermic reaction because heat is absorbed by the reaction.
For (2):When ammonia reacts, some amount of heat will be absorbed by the reaction. Thus, we can say the heat will be absorbed.
The number of moles is calculated by using the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of ammonia = 70.9 g
Molar mass of ammonia = 17 g/mol
Using equation 1:
[tex]\text{Moles of ammonia}=\frac{70.9g}{17g/mol}=4.17mol[/tex]
By stoichiometry of the reaction:
If 2 mole of ammonia reacts, the heat absorbed is 160 kJ
So, if 4.17 moles of ammonia reacts, the heat absorbed will be = [tex]\frac{160kJ}{2mol}\times 4.17mol=333.6kJ[/tex]
Hence, 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts
Predict the products of below reaction, and whether the solution at equilibrium will be acidic, basic, or neutral.
N2O5 + 3H2O → __________
Answer: The product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.
Explanation:
When two or more chemical substances react together then it forms new substances and these new substances are called products.
For example, [tex]3N_{2}O_{5} + 3H_{2}O \rightarrow 6HNO_{3}[/tex]
This shows that nitric acid [tex](HNO_{3})[/tex] is the product formed and it is an acidic substance.
Hence, the solution at equilibrium will be acidic in nature.
Thus, we can conclude that the product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.
