b) Filter the sample. If a solid does not completely dissolve in a solvent, the undissolved solid particles can be removed by filtering the sample. This is usually done by passing the mixture through a filter paper.
If a solid does not completely dissolve in a solvent, it is important to properly handle the mixture to obtain a clear solution. One option is to filter the sample to remove the undissolved solid particles. This can be done by passing the mixture through a filter paper or a filter apparatus. The filtered solution can then be used for further analysis or experimentation. Another option is to keep stirring the mixture in the hope that the solid will eventually dissolve. If this is not successful, adding more of the solid to the solvent may help increase the solubility of the substance. However, it is important to consider the solubility limits of the substance in solvent the solvent and to not exceed them, as this may result in a saturated solution.
Learn more about solvent here
https://brainly.com/question/30452436
#SPJ4
What is the mathematical relationship between atomic mass units (amu) and grams (g)? 1 gram = _____________ amu
The necessary mathematical formula is1 amu = 1.66×10⁻²⁴ g. A recognized definition of an atomic masses unit is the mass of one-twelfth of a neutral, unbonded carbon isotope (C-12) atom.
How do atomic size and atom mass units relate to one another?The atomic mass represents the total amount of protons and neutrons, whereas the atomic number denotes the quantity of neutrons in the atom's nucleus. It is written in either AMU or Da. For all average atomic calculations, carbon-12 is used as the reference.
What connections exist between the atomic and mass numbers?The sum of an element's number of particles and its number of nucleons is given by the formula quantity = proton + neutrons. Simply deduct this quantity of protons, or isotope, from the atomic weight to get how many neutrons each atom has.
To know more about atomic mass visit:
https://brainly.com/question/5661976
#SPJ4
Fill in the blanks for each of the following questions (30 pts] 1. In general, there are three steps to an electrophilic aromatic substitution reaction. These are: (a) formation of an ___ : (b) reaction with an aromatic ring to form an ___ ; and ; and (c) loss of ___ to reform the aromatic system
The overall reaction is thermodynamically favorable as the products have higher stability than the reactants.
The three steps of an electrophilic aromatic substitution reaction are: (a) formation of an electrophile, (b) reaction with an aromatic ring to form an intermediate, and (c) loss of a leaving group to reform the aromatic system. The first step involves attacking an electron-rich aromatic ring with an electrophile, which is an electron-deficient species. This attack forms a cationic intermediate, which is a species with a positive charge. The second step involves the reaction of the intermediate with a nucleophile, resulting in the formation of a new carbon-carbon bond and the release of a leaving group. The final step involves the loss of the leaving group, resulting in the formation of a new aromatic system. The overall reaction can be represented as follows: Ar-H + E+ --> Ar-E+ --> Ar-X + E- --> Ar-Y, where Ar-H is the starting aromatic compound, E+ is the electrophile, Ar-E+ is the intermediate, Ar-X is the product with the leaving group, and Ar-Y is the final product after the leaving group is lost. The net reaction can be written as Ar-H + E+ --> Ar-Y. The overall reaction is thermodynamically favorable as the products have higher stability than the reactants.
Learn more about electrophile here:
https://brainly.com/question/30026567
#SPJ4
When small molecules are linked together to form larger molecules, the increase in entropy typically comes from:
a. light
b. enzymes
c. work
d. gas
e. heat
When small molecules are linked together to form larger molecules, the process typically releases heat and increases the entropy of the system.
The option e. heat is correct.
The increase in entropy results from the release of heat energy as a result of the formation of new bonds between the atoms in the small molecules. This process is known as exothermic, which means that heat is released to the surrounding environment.
It's important to note that the relationship between entropy and heat is based on the Second Law of Thermodynamics, which states that the total entropy of a closed system will always increase over time.
To learn more about entropy, visit:
https://brainly.com/question/22145368#
#SPJ11
a safe procedure to heat a chemical in a test tube is to place the test tube in a hot-water bath. group of answer choices true
True. Heating a chemical in a test tube by placing it in a hot-water bath is a safe method. This is because the heat is transferred evenly and gradually to the contents of the test tube, reducing the risk of the test tube breaking due to thermal stress.
Here are some additional points to consider when using a hot-water bath:
Ensure the test tube is securely clamped or held in place to prevent it from tipping or breaking.Gradually heat the water bath to the desired temperature to avoid thermal shock to the test tube.Avoid direct heating of the test tube using a flame, as this can result in thermal stress and cause the test tube to break.Stir the water bath occasionally to ensure even heating and minimize temperature gradients.Always use heat-resistant gloves to handle the hot test tube and water bath.After the reaction is complete, allow the test tube and water bath to cool down gradually before handling.By following these guidelines, you can safely and effectively heat a chemical in a test tube using a hot-water bath.
Learn more about hot-water baths here:
https://brainly.com/question/28554857
#SPJ4
how can you controlling hazardous substances, like coolant that drip off engine components when diagnosing and repairing cooling systems
Controlling hazardous substances like coolant that can drip off engine components when diagnosing and repairing cooling systems requires taking appropriate safety measures to minimize the risk of exposure. Here are some steps you can take to control the spread of hazardous substances:
Isolate the work area: Set up a barrier around the work area to keep coolant from spreading to other parts of the garage or workspace.
Use protective equipment: Wear gloves, eye protection, and other appropriate protective gear to minimize your exposure to coolant.
Collect and contain spills: Use absorbent materials like kitty litter, sand, or oil-only sorbents to collect and contain any coolant that drips off the engine components. Dispose of the absorbed material in a safe and appropriate manner.
Use drip pans: Place drip pans or catch trays under the engine components to catch any coolant that may drip off.
Clean up thoroughly: Clean up any remaining coolant or absorbent material thoroughly, taking care to avoid spreading the material to other parts of the workspace.
Learn more about components here:
https://brainly.com/question/29377319
#SPJ4
I WILL GIVE 36 POINTS FOR THOSE WHO ANSWER THESE PROBLEMS RIGHT NOOOO SCAMS PLEASE
A glucose molecule contains 6 atoms. When the atoms in a compound have an entire outermost electron shell, the compound is stable. Vertical columns in the periodic table are referred to as groups or families.
What causes atom to become charged when ionic bond is formed?
Atoms become charged when electrons are transferred from one atom to another and form an ionic bond. This results in the formation of a positive ion (cation) and a negative ion (anion), which are attracted to each other and form an ionic bond.
Where are non metals located on periodic table?
Nonmetals are typically found on the periodic table's right side. Groups or families refer to the vertical columns of the periodic table.
To know more about nonmetals, visit here:
https://brainly.com/question/16749127
#SPJ1
which type of solid will not have a precise melting point? select the correct answer below: covalent network solid metallic solid molecular solid these will all have a precise melting point
Molecular solids will not have a precise melting point, as their molecules are held together by weak intermolecular forces and can therefore melt over a range of temperatures. Covalent network solids, metallic solids, and other types of solids will all have a precise melting point.
Molecular solids are solids composed of discrete molecules held together by intermolecular forces. These forces can be relatively weak, such as hydrogen bonds, dipole-dipole interactions, or van der Waals forces.
As a result, molecular solids typically have a low melting point and tend to be soft and easily deformable. Examples of molecular solids include certain polymers, such as polyethylene, and many organic compounds, such as sugars, some plastics, and many pharmaceuticals.
Learn more about Molecular solids:
https://brainly.com/question/14313365
#SPJ4
how many directions of cleavage does this sample have, and what angle do they make with one another?
This sample have 3 set of directions of cleavage and not at 90°.
Cleavage is defined as the tendency of minerals to split along crystallographic planes as a result of structural locations of atoms and ions in the crystal, creating planes of relative weakness.
Cleavage is termed as an excellent diagnostic property. Cleavage, distinguishes some amphiboles from other similar minerals. The term cleavage basically refers to the way a mineral cleaves, or breaks, in preferred directions. Cleavage directions are used to represent planes of weak bonding in the mineral's atomic structure.
Calcite is an example which have 3 directions of cleavage but not at 90° and galena also have 3 set of cleavage but at 90°.
Learn more about cleavage from the link given below.
https://brainly.com/question/15839332
#SPJ4
In general, this type of crystalline solid has the best thermal and electrical conductivity. a) Metallic b) Covalent-network c) Ionic d) Molecular
Metallic solids have the best thermal and electrical conductivity due to the large number of free electrons present in the metal lattice.
Metallic solids are composed of a crystalline lattice of metal ions that are held together by the electrostatic attraction of their outermost electrons. This type of solid has the best thermal and electrical conductivity due to the free electrons that are present in the metal lattice. The free electrons can easily move through the metal lattice, allowing for good thermal and electrical conductivity. This is expressed mathematically by the Drude-Sommerfeld model which states that the electrical conductivity of a metal is given by the equation:
σ = (e2/2π2m)n,
where e is the electron charge, m is the electron mass, and n is the number of electrons per unit volume. This equation shows that the higher the number of free electrons in the metal lattice, the higher the electrical conductivity. Similarly, the thermal conductivity of a metal is given by the Wiedemann-Franz law, which states that the thermal conductivity of a metal is proportional to its electrical conductivity. This means that as the electrical conductivity of a metal increases, so does the thermal conductivity. Therefore, metallic solids have the best thermal and electrical conductivity due to the large number of free electrons present in the metal lattice.
Learn more about electrostatic attraction here:
https://brainly.com/question/19362779
#SPJ4
How many units are in 22.4 g of SnO₂?
In 22.4 gm of SnO₂ 8.933 * 10²² molecules are present which is .148 moles.
What is Molecular Mass?The molar mass of a chemical compound is defined as the ratio between the mass and the amount of that substance in any sample. A material's molar mass is a bulk characteristic rather than a molecular one.
The molar mass of a substance is its mass expressed in grams per mole. G/mol, or grams per mole, is the sign for molar mass. The ratio between the mass of an isotope and the mass of the isotope carbon is known as the isotopic atomic mass, or mass of a single isotope of any particular element. -12
The Avogadro constant, also known as NA or L, is the proportionality factor that links the amount of material in a sample to the number of component particles in that sample. It is a SI defining constant with an exact value of 6.02214076*1023 reciprocal moles.
Molar mass of Sn = 119
Molar mass of O₂ = 2* 16 = 32
Molar mass of SnO₂ = 119 + 32 = 151 gm
In 151 gm of SnO₂ = 6.022*10²³ molecules are present
In 1 gm of SnO₂ = 6.022*10²³/151 molecules are present
In 22.4 gm of SnO₂ = 6.022*10²³* 22.4/151 = 8.933 * 10²² molecules are present
To learn more about Molar mass refer to :
brainly.com/question/15350387
#SPJ1
how many minutes would be required to electroplate 26.3 g of chromium by passing a constant current of 4.80 a through a solution containing crcl3? please round to an integer. (1 faraday = 96,500 c).
The minutes will be required to the electroplate 26.3 g of the chromium by passing the constant current of 4.80 through solution containing CrCl₃ is 1,675.33 minutes .
The mass of the chromium = 26.3 g
The moles of the chromium = mass / molar mass
The moles of the chromium = 26.3 / 51.996
= 0.5034 moles.
The current = 4.80 amp
The number of Coulombs required = moles ×faraday constant
= 0.5034 × 96500
= 484,986 C.
The time required is as follows :
t = Q / I
t = 484,986 / 4.80
t = 100520 seconds
t = 1,675.33 minutes
The time required is 1,675.33 minutes .
To learn more about current here
https://brainly.com/question/30396244
#SPJ4
at 25°c, a 15.000 g sample of an unknown liquid was determined to have a volume of 19.01 m
At 25°c, a 15.000 g sample of an unknown liquid was determined to have the volume of 19.01 mL. The density of the liquid is 0.789 g/mL.
The mass of the sample of the unknown liquid = 15 g
The volume of the sample of the unknown liquid = 19.01
The expression for the density is expressed as follows :
The density = mass / volume
The density of the substance is the measurement of the mass per unit the volume.
The density = mass / volume
where,
Mass = 15 g
Volume = 19.01 mL
The density = 15 / 19.01
The density = 0.789 g/ mL
This question is incomplete , the complete question is :
At 25°c, a 15.000 g sample of an unknown liquid was determined to have a volume of 19.01 mL. calculate the density of the liquid.
To learn more about density here
https://brainly.com/question/29775886
#SPJ4
if an atom contained only four energy levels (such as in the figure below), how many possible different emission lines could it emit? hint: be sure to count all the possible transitions that give emission lines.
If an atom contained only four energy levels (such as in the figure below), the possible different emission lines could it emit is 6.
EMISSION LINEEmission line is the spectrum that is produced when low pressure gas is ignited only at certain colors or wavelengths. Each different element emits a different set of lines.
EMMISIONEmissions are defined as the result of burning fossil fuels such as coal, natural gas and oil which are dispersed into the air, depending on the composition of the fuel and the type and size of the boiler.
Emissions are one of the contributors to air pollution which can have an impact on human health and the surrounding environment.
Learn more about emmision at https://brainly.com/question/30098735.
#SPJ4
the mole is a counting unit defined as 1 mole = 6.022 × 1023 objects. if you have a sample of 6.45 × 10-3 moles of h2o, how many hydrogen atoms would the sample contain?
If we have the sample of 6.45 × 10⁻³ moles of the H₂O, the number of hydrogen atoms the sample contain is 7.7 × 10²¹ atom of H.
1 mole of substance = 6.022 × 10²³ atoms
The moles of water = 6.45 × 10⁻³ moles of the water
18 g of water = 1 mole = 6.45 × 10⁻³ moles of water
1 g of hydrogen = 1 mole = 6.45 × 10⁻³ atoms of hydrogen
The moles of H atom = (2 × 6.45 × 10⁻³ ) 6.022 × 10²³ atom of H
The moles of the H atom = 7.7 × 10²¹ atom of H
Thus, the number of the oxygen atom is 7.7 × 10²¹ atom of H.
To learn more about atoms here
https://brainly.com/question/30482564
#SPJ4
The standard enthalpy of formation of Cl(g) is +242 kJ/mol.
What is the dissociation energy of a Cl-Cl bond?
A) +242 kJ/mol
B) -242 kJ/mol
C) +484 kJ/mol
D) +121 kJ/mol
E) -121 kJ/mol
The dissociation energy of a Cl-Cl bond is +484 kJ/mol.
The correct option is C.
What is the standard enthalpy of the formation of a substance?The standard enthalpy of formation of a substance is the enthalpy change that takes place when 1 mole of the substance is created from its component elements in their standard states.
The standard enthalpy of the formation of Cl(g) is +242 kJ/mol.
The Cl-Cl bond contains two atoms of Cl(g)
The dissociation energy of a Cl-Cl bond will be twice the standard enthalpy of the formation of Cl(g).
The dissociation energy of a Cl-Cl bond = 2 * (+242) kJ/mol.
The dissociation energy of a Cl-Cl bond = +484 kJ/mol
Learn more about dissociation energy at: https://brainly.com/question/24301293
#SPJ1
how many lone pairs of electrons must be added to each of the structures to complete the lewis structure?
Around the main atom, there are three lone pairs (6/2) of electrons. Since there are 4 hydrogen atoms present, bonds can form from 2 electrons.
It is safe to suppose that each hydrogen valence electron forms a link with a silicon valence electron. Since this molecule's valence electrons have all established bonds, the Lewis structure won't display any lone pairs. The distribution of valence electrons around the atoms in a molecule is depicted in a Lewis diagram. While lone pairs of electrons are depicted as dots next to atoms, shared pairs of electrons are shown as lines between them. Around the main atom, there are three lone pairs (6/2) of electrons. Since there are 4 hydrogen atoms present, bonds can form from 2 electrons.
The complete question is- How many lone pairs of electrons should be shown in the Lewis structure for CH3NHCl?
Learn more about valence here-
https://brainly.com/question/28977387
#SPJ4
The federal government put together a panel to review the health effects of leaded gasoline. The panel concluded that leaded gasoline wasn’t a big deal. Who was put on the panel? Who was left off the panel?
The federal government put together a panel to review the health effects of leaded gasoline. The panel concluded that leaded gasoline wasn’t a big deal and those who were put on the panel were the Surgeon General and other professors from different universities and Midgely was left off the panel.
What is Leaded petrol?This is referred to as a type of petrol containing tetraethyl lead in order to improve combustion.
It was discovered that it was unsafe which was why it was banned as it increased the risk of lead poisoning in individual which could have adverse effects on the health.
Read more about Leaded petrol here https://brainly.com/question/13860887
#SPJ1
) what is the ph of a solution containing 6 x 10-5 mg/l of oh- ?
The pH of the given solution is 6.25 when it contains 6 x 10-5 mg/l of OH-
pH is measure if acidity or basicity of a chemical depending on the concentration of OH- ions or H+ ions present in it. Highly acidic and basic molecule have high concentration of H+ ions and OH- ions in the respectively. Highly acidic molecule have pH near 0 and basic molecule have it near 14. molecule which are neutral have pH of 7.
Consider volume of the solution is 1 L.
mass of OH=3x10-4 mg=3x10-7g
Molar mass of OH=17g/mole
Number of mol of OH- =mass /molar mass
=3×10-7 g / 17g mol-1
= -1.765 × 10-mol
Calculate concentration of OH.
[OH-] = number of moles / volume = 1.765×10¯8mol / 1L
=1.765x10-8 mol
pOH = -log[OH¯]
=-log(1.765×10-8)=7.75
Now calculate pH of the solution as shown below. pH = 14 - pOH
= 14 -7.75 = 6.25
Therefore, pH of the solution is 6.25.
To learn more about moles click here;
https://brainly.com/question/24191825
#SPJ4
what functional group transformation occurs in the product of the reaction catalyzed by na -nqr?
The reaction catalyzed by Na-NQR (Sodium Nitroprusside) results in the transformation of a nitroprusside functional group (-N=C=S-) to a nitric oxide (NO) functional group.
The reaction catalyzed by Na-NQR (Sodium Nitroprusside) is a redox reaction that results in the transformation of a nitroprusside functional group (-N=C=S-) to a nitric oxide (NO) functional group. This reaction is an important part of the nitric oxide cycle, which is essential for the regulation of many physiological processes.
The reaction is catalyzed by the enzyme nitric oxide synthase, which is activated by the presence of Na-NQR. The reaction is a two-step process, with the nitroprusside functional group being reduced to a nitrosyl functional group in the first step, and then further oxidized to the nitric oxide functional group in the second step.
To know more about Catalyzed, click here.
https://brainly.com/question/28163008
#SPJ4
Displacement reactions of the halogens.
Answer:
Explanation:
Reactivity of halogens basically decreases. Imagine this halogens are these people who need love, they need to attract metals who are hot.
The number of shells increases as you go down the group, so they become fatter. Fluorine is the hottest , chlorine is the second hottest, the rest are fat-fattest. The plus size elements (Bromine, Iodine) find it easier to lose an electron, because they are "insecure", the attraction between protons and valence electrons are not high, because they are so far away. Metals need their partners do be stiff so that they can give away their electrons. Halogens are not metals, they need to attract them, so it is ideal here to not lose electrons.
Hope that explanation helps, phew!
Significant Figure question Please Help!!!! I tried doing the first two but all of my answers were incorrect!
The values of the arithmetic expressions to the appropriate number of significant figures are:
1. 128460 to five significant figures
2. 6.164 to four significant figures
3. 66679 to five significant figures
What are the values of the following arithmetic expression?The values of the following arithmetic expressions are determined as follows:
1. (87.7 - 23.472) ÷ 0.0050 = 64.228 ÷ 0.0050
64.228 ÷ 0.0050 = 128460 to five significant figures
2. (552 ÷ 945.5) + 5.58 = 0.583818085 + 5.58
0.583818085 + 5.58 = 6.164 to four significant figures
3. [(2.89 × 10⁶) ÷ 43.441] + 152.00 = 66527.01365 + 152.00
66527.01365 + 152.00 = 66679 to five significant figures
Learn more about significant figures at: https://brainly.com/question/24630099
#SPJ1
Given below is a list of substances and its density:
Substance Density
Water 1.0 g/mL
Oil 0.80 g/mL
AB 0.88 g/mL
Mercury 8.6 g/mL
A student fills all the above substances into a graduated cylinder. Where the AB will appear after
filling all substances in the graduated cylinder?
(A) AB will appear between Oil and Water in the graduated cylinder
(B) AB will appear between mercury and Water in the graduated cylinder
(C) AB will appear just below the water in the graduated cylinder
(D) AB will appear just above the mercury in the graduated cylinder
Answer: The correct answer is (A) AB will appear between Oil and Water in the graduated cylinder
Explanation:
Density is a measure of how much mass is contained in a given volume. Substances with a higher density will have more mass in a given volume, and will therefore be heavier.
When we fill the graduated cylinder with the above-mentioned substances, we will notice that Water, Oil and AB will be on top of each other. Since the density of AB is 0.88 g/mL and the density of Oil is 0.80 g/mL, this means that AB will have more mass in the same volume than oil and thus AB will be heavier than oil, so AB will appear between oil and water in the graduated cylinder.
Mercury is much denser than water, oil and AB, so it will be at the bottom of the graduated cylinder.
Frozen red cells that have been prepared with high glycerol methods (40% glycerol) can be stored up to 10 years if held at which of the following temperatures?
- 65o C or lower
- 20o C or lower
- 10o C or lower
- 0o C or lower
Storing red blood cells (RBCs) requires proper preservation techniques to maintain their viability and functionality. One method is the high glycerol preservation method, which uses a high concentration of glycerol (40%) to protect the cells during storage. The temperature at which the RBCs are stored also plays a crucial role in determining their longevity.
Out of the options listed, the correct temperature for storing RBCs prepared with high glycerol preservation method is at 0°C or lower. At this temperature, the glycerol solution slows down cellular metabolism, preserving the viability and functionality of the RBCs for a longer period of time. Storing RBCs at 65°C or lower may damage the cells, rendering them unusable for transfusion. Similarly, storage at 20°C or lower may result in short-term preservation but is not ideal for long-term storage as it may cause a significant reduction in RBC viability. Storing RBCs at 10°C or lower may provide short-term preservation, but it may not be optimal for long-term storage as the low temperature may cause freezing of the cells, leading to irreversible damage.
Here you can learn more about red blood cells (RBCs)
https://brainly.com/question/4414904#
#SPJ11
although the structures of the functional groups that are most important to life vary, they share one thing in common: they group of answer choices all have at least one double bond always cause the carbon to which they are attached to become an asymmetric carbon, thus converting the molecule into an enantiomer all help give each biological molecule its unique properties all contain oxygen
The structures of the functional groups share one thing in common i.e. they D: "all help give each biological molecule its unique properties".
The functional groups found in biological molecules, such as carbohydrates, lipids, nucleic acids, and proteins, are crucial to the unique properties and functions of these molecules. These functional groups, although structurally different from each other, share the common feature of determining the overall shape, reactivity, and solubility of each molecule.
In short, the functional groups in biological molecules play a critical role in determining the molecule's properties, and their specific structures and arrangements help give each molecule its unique properties and functions within the organism.
You can learn more about functional groups at
https://brainly.com/question/28950624
#SPJ4
What is inertia?
the motion of an object
a force that acts on an object at rest
an object’s resistance to a change its motion
the speed and direction of an object in motion
Inertia of an object is its tendency to stay in its current state. Hence it is the resistance to change its motion. Thus, option c is correct.
What is Newton's law of motion ?According to Newtons; first law of motion every object tend to continue in the state of rest or motion until an external force act on it. This tendency is called inertia.
The impacts of inertia can be well explained based on on real life examples. If we might had the experience of moving to front in a vehicle which suddenly breakes. It is the tendency of the vehicle to stay in motion.
Similarly the car when started from rest initially tends to stay at rest and that's why we feel it moves back ward. Similarly the car will move forward when it is suddenly stops. Hence, option c is correct.
Find more on more inertia:
brainly.com/question/3268780
#SPJ1
What are the characteristics between metals and non metals?
Metals typically have the highest melting and boiling temperatures, electrical and thermal outcomes achieved, and a metallic appearance. Nonmetals are often softer, more vibrant components.
Short answer: What are Metallic and Non-Metals?Non-metals lack ductility and cannot be pulled into wires, whereas alloys are ductile and may be. Non-metals are not sonorous and are not able to ring bells, but metals are resonant and can. Non-metals are weak conductors of electricity and heat compared to metals.
What characteristics of metals and nonmetals are similar and different?Nonmetals are poor heat and electrical conductors, whereas metals are. In chemical processes, nonmetals often receive electrons whereas metal tend to lose them. Nonmetals often lack lustre, although metals frequently do. Nonmetals often tend to be brittle, whereas metal are malleable and ductile.
To know more about non - metals visit:
https://brainly.com/question/29400906
#SPJ4
Figure 2: The conversion of ethanol to acetaldehyde The molar mass of sugar is 180,16 g/mol. If 1801,6 grams of sugar was used in the alcohol fermentation reaction, how many grams of ethanol is produced? Choose 1 answer: A. 230.48 B. 921.48 C.1842.88 D.460.78
If 1801,6 grams of sugar was used in the alcohol fermentation reaction, The grams of ethanol is produced is the correct option is D. 460.78 g.
The balanced reaction of the sugar fermentation is :
C₆H₁₂O₆ ---> 2C₂H₅OH + 2CO₂
The mass of the sugar = 1801.6 g
The molar mass of the sugar 180.16 g /mol
The moles of sugar = mass /molar mass
The moles of the sugar = 1801.6 / 180.15
The moles of the sugar = 10 mol
1 mole of sugar produces 2 moles of ethanol
The moles of ethanol = 2 × 10
= 20 mol
The mass of ethanol produces = moles × molar mass
= 20 × 46.07
= 460.78
To learn more about mass here
https://brainly.com/question/30167522
#SPJ4
describe the difference between a cstr and a pfr using a written description and equation for how concentrations vary with time.
The main difference between a CSTR and a PFR is the manner in which the concentrations of reactants and products vary with time.
In a CSTR, the concentration is uniform and can be described by an average concentration, while in a PFR, the concentration varies along the reactor length and can be described by the exponential decay equation. The choice of reactor depends on the specific requirements of the chemical reaction and the desired outcome of the process.
A Continuous Stirred Tank Reactor (CSTR) and a Plug Flow Reactor (PFR) are two common types of chemical reactors used in industrial processes. Although both reactors operate continuously and aim to convert the reactants into products, they differ in their design, operation, and the manner in which the concentrations of reactants and products vary with time.
A CSTR is a well-mixed reactor where the reactants are continuously stirred and the residence time is constant for all reactants. The concentration of reactants and products within the reactor are uniform, and the concentration at any point in time can be described by an average concentration, represented by the equation:
C = (F₀ x C₀ + F₁ x C₁) / (F₀ + F₁)
Where C is the average concentration, F₀ is the flow rate of the feed stream, C₀ is the concentration of the feed stream, F₁ is the flow rate of the incoming stream, and C₁ is the concentration of the incoming stream.
In contrast, a PFR operates under plug flow conditions, meaning that the reactants flow through the reactor in a series of plug-like segments, with no mixing occurring between segments. The residence time of reactants varies along the reactor length, and the concentration of reactants and products can be described by the equation:
[tex]C = C_{0} e ^{-k (r) t }[/tex]
Where C is the concentration, C₀ is the initial concentration, k(r) is the rate constant, and t is time [ C = C₀ x e^(- k(r) x t) ].
Learn more about Plug Flow Reactor at : https://brainly.com/question/29825790
#SPJ4
explain how can you?convert solid fuel to liquid fuel and why.
The conversion process typically involves heating the solid fuel to its boiling point, then separating the vapor and condensing it into a liquid.
Converting solid fuel to liquid fuel is a process known as liquefaction, and it is done to improve the storage, transport, and combustion of the fuel.
The conversion process typically involves heating the solid fuel to its boiling point, then separating the vapor and condensing it into a liquid. The liquid fuel can be further processed to remove impurities and improve its properties, such as viscosity, flash point, and energy content.
One of the primary reasons for converting solid fuel to liquid fuel is to improve its storage and transport properties. Liquid fuels are easier to store and transport than solid fuels, as they can be stored in tanks or pipelines and transported by tanker trucks or ships. This makes it easier to distribute the fuel to where it is needed.
Another reason for converting solid fuel to liquid fuel is to improve its combustion properties. Liquid fuels are more energy-dense than solid fuels and can be burned more efficiently, providing more energy per unit of fuel. This can lead to lower emissions, improved fuel economy, and reduced costs.
To know more about fuel cliCK here:
https://brainly.com/question/2730670#
#SPJ11
what is the color reaction of vitamin e with n-butyl alcohol
Red is the color reaction of vitamin E with n-butyl alcohol since it is an acid-base reaction where vitamin e acts as an acid and n-butyl alcohol is a base.
Tocopherols are a class of fat-soluble substances that make up vitamin E. It can dissolve in fats and oils if it is fat-soluble. Alcohol's toxic effects can be lessened by vitamin E, which is also an effective possible treatment for liver oxidative damage brought on by alcohol. A white liquid with a vinous smell is n-BuOH. It has a scent that is somewhat reminiscent of fuse1 oil. When vitamin E scavenges peroxyl radicals, it creates vitamin E radical, which can then be reduced by vitamin C or other reducing substances to regenerate vitamin E or further oxidised into -tocopheryl quinone. A biomarker of vitamin E's antioxidant activity is -tocopheryl quinone.
To learn more about alcohol click here https://brainly.com/question/231913
#SPJ4
