The substance which can move across a barrier by the process of osmosis is water substance.
Osmosis is defined as a process in which the solvent molecules are passed through a semi-permeable membrane from a lower concentrated region to the higher concentrated region. The osmosis is a passive process, which drives the internal energy of the solvent molecules. Some examples of osmosis process are diffusion of gases like O₂ and CO₂, diffusion of benzene and ethanol etc. In this method, the solution is passed through the semi-permeable membrane and the solvent is separated from the solution. When solvent is separated, then the solution is diluted.
Therefore, water molecule can move across a barrier by osmosis.
To know more about osmosis
https://brainly.com/question/20969106
#SPJ4
32 is a radioactive isotope with a half-life of 14.3 days. if you currently have 24.9 g of p32, how much p32 was present 9.00 days ago?
38.52 g of phosphorus-32 was present 9.00 days ago if it has a half-life of 14.3 days
As the half-life of phosphorus-32 is 14.3 days and the remaining amount is given to be 24.9 g and we need to determine the amount present 9 days ago therefore we first determine the number of half-lives that have elapsed as follows;
n = time ÷ half-life
n = 9/14.3
Finally, we can calculate the amount of the radioactive isotope that was available 9 days ago
Amount remaining (N) = 24.9 g
Number of half-lives (n) = 9/14.3
N₀ = 2ⁿ × N
N₀ = 2^(9/14.3) × 24.9
N₀ = 38.52 g
Hence the amount present 9 days ago is calculated to be 38.52 g
To learn more about half-life; click here:
https://brainly.com/question/1160651
#SPJ4
What is the mass of 1 mole of sodium oxide?.
Sodium oxide has a molecular mass of 62 amu, which is the sum of two sodium atoms and one oxygen atom.
The sum of the atomic masses of all atoms in a molecule is the molecule's molecular mass. As a result, if we know the molecular formula, which can be given and calculated, we can calculate the molecular mass. In chemistry, the formula weight is calculated by multiplying the atom weight (in atomic mass units) of each element in a chemical formula by the number of atoms in the formula, then adding all of these products together.
Learn more about molecular mass here:
https://brainly.com/question/18446366
#SPJ4
The most appropriate formula for solving this problem includes only which variables?.
The new pressure of the container will be 1.14 atm and the most appropriate formula for solving this problem is P/T constant with pressure and temperature as variables.
The most appropriate formula for solving this problem includes the temperature and pressure as variables.
P/T = Constant
Because the volume of the container is constant.
The initial pressure p is 1atm, initial temperature t is 273K and the final temperature T is 311K, the final pressure P will be,
P/T = p/t
Putting values,
P/311 = 1/273
P = 311/273
P = 1.14 atm.
So, the final pressure of the container is 1.14atm.
To know more about Pressure, visit,
https://brainly.com/question/28012687
#SPJ4
Complete question - One mole of an ideal gas is sealed in a 22.4-l container at a pressure of 1 atm and a temperature of 273 k. the temperature is then increased to 311 k , but the container does not expand. what will the new pressure be? part a the most appropriate formula for solving this problem includes only which variables? enter the required variables, separated by commas (e.g., p,v,t).
5 x 10^8- standard notation
Answer:
5e-8 (500,000,000)
Explanation:
The scientific notation 5e-8 is same as 5 x 10^-8 or 5 x 10 -8. Thus, to get the answer to 5e-8 as a decimal, we multiply 5 by 10 to the power of -8. = 5e-8.
Answer:
5 x 10^8 = 500,000,000
Explanation:
You are going to have to type this equation into a calculator, because it might take way too long to do it on paper. But if you happen to do it on paper for no reason, this is how you would do it:
You are going to take the 10, and add 0 to it 8 different times:
10, 100, 1,000, 10,000, 100,000, 1,000,000, 10,000,000 100,000,000.
Then, you multiply 100,000,000 by 5:
100,000,000 x 5 = 500,000,000.
May I have Brainliest please? My next rank will be the highest one: A GENIUS! Please help me on this journey to become top of the ranks! I only need 13 more brainliest to become a genius! I would really appreciate it, and it would make my day! Thank you so much, and have a wonderful rest of your day!
at the conclusion of the experiment, the student notes that there are four primary bands in the cesium chloride gradient, with all four bands ranging between approximately 30 and 60s. what is a logical conclusion that can be drawn from this data?
At the conclusion of this experiment, there is a combination of both prokaryotic and eukaryotic ribosomes in the sample.
What is difference between prokaryotic and eukaryotic ribosomes?
How they produce proteins is the primary distinction between bacterial and eukaryotic ribosomes. Large protein molecules make up eukaryotic ribosomes, enabling them to synthesis larger proteins than do bacterial ribosomes. Large proteins are better able to perform complex jobs in the cell, therefore this is significant. Prokaryotic ribosomes typically produce smaller, simpler proteins, which restricts their capacity to perform complex functions.
Another difference between prokaryotic and eukaryotic ribosomes is how they interact with other molecules in the cell. Prokaryotic ribosomes interact with other molecules by binding to specific sites on their surface. This interaction allows the Ribosome to work its magic and produce proteins. Eukaryotic ribosomes, on the other hand.
To learn more about prokaryotic and eukaryotic ribosomes:
https://brainly.com/question/1820829
#SP J4
The table below shows the boiling points of some halogens.
Halogen
Boiling point in °C
Bromine
60
Chlorine
−34
Fluorine
−188
Explain the trend in the boiling points of the halogens.
The boiling point of halogens increases down the family.
Explanation:Boiling Point
Boiling point has multiple factors, but for the purposes of this question, the main factor is IMFs. IMFs are intermolecular forces. IMFs are the attractions that occur between the atoms or molecules of a sample. The stronger the IMFs, the higher the boiling point. This is because strong IMFs hold the molecules together, so it takes more energy to break the attractive forces.
Polarizability
Pure halogens are always non-polar. This means that there are no dipoles or other forms of permanent electron shifts. Since all halogens are nonpolar, there is only one type of IMF: London Dispersion Forces. LDFs are the attractive forces caused by the temporary and random shifts of electron clouds. All molecules experience LDFs. However, LDFs have varying strengths. The larger the molecule, the stronger the LDF. This is due to polarizability. Polarizability is the ease with which electron clouds can shift. Bigger molecules have larger electron clouds, hence the higher polarizability and stronger LDFs.
Since halogens further down the table are larger, both in atomic radius and electron cloud, they have higher polarizability. This leads to stronger LDFs and IMFs. As stated in the first paragraph, strong IMFs cause higher boiling points. This is why larger molecules like Bromine have higher boiling points than small molecules like Fluorine.
Is Na and O ionic or covalent?.
Because it has a metal cation and a non-metal anion, sodium oxide is a binary ionic compound.
Describe non-metal anion.Non-metals are substances with a propensity to pick up electrons during chemical processes to generate anions. These are strong ionizing elements that are electronegative. They lack luster, are fragile, and have poor conductivity for both heat and power (except graphite). Gases, liquids, or solids can all be non-metals.
Exist non-metal cations?Because of their high ionization energy, nonmetals do not normally form monatomic positive ions (cations) during chemical reactions. Examples of anions include the chloride ion, Cl-, the nitride ion, N3-, and the selenide ion, Se2-, which are all monatomic nonmetal ions.
To know more about non metal cations visit:
https://brainly.com/question/8098159
#SPJ4
Generating hydrogen from water or methane is energy intensive. A non-natural enzymatic process has been developed that produces12 moles of hydrogen per mole of glucose by the reaction:CgH12O6(aq)+6H2O(l)-> 12H2(g)+6cO2(g)What volume of hydrogen could be produced from 256g of glucose at STP?
Volume of hydrogen could be produced from 256g of glucose at STP is 381.69 L.
The balanced reaction is given as :
C₆H₁₂O₆ + 6H₂O ----> 12H₂ + 6CO₂
moles of H₂ = 12 mol
mass of glucose = 256 g
moles of glucose = mass / molar
= 256 / 180.16
= 1.42 mol
1 mole of glucose = 12 mole of H₂
1.42 moles = 12 × 1.42 = 17.04 mol
1 mole of an ideal gas at STP is 22.4 L
volume = 17.04 × 22.4 = 381.69 L
Thus, Generating hydrogen from water or methane is energy intensive. A non-natural enzymatic process has been developed that produces12 moles of hydrogen per mole of glucose by the reaction. Volume of hydrogen could be produced from 256g of glucose at STP is 381.69 L.
To learn more about volume here
https://brainly.com/question/19731404
#SPJ4
What is the role of election?.
The major duty of India's Election Commission is to supervise impartial elections across the whole country. The Indian Election Commission is the Direct Superintendent.
The elections for the President and Vice President of India, as well as the legislatures and parliaments of each State, are under its supervision. Vote counting is the Election Commission's most important job during an election. Each of the State Election Commissioners is independent of the Indian Election Commission and is in charge of a certain task. To oversee the holding of elections for Panchayati Raj institutions, a State Election Commissioner must be chosen by the State government.
Learn more about elections here
https://brainly.com/question/11185151
#SPJ4
the (fill the blank) division of the peripheral nervous system brings sensory information to the central nervous system.
The afferent division of the peripheral nervous system brings sensory information to the central nervous system.
What Is the Nervous System ?The brain, spinal cord, and a sophisticated nerve network are all parts of the nervous system. The brain and the body are communicated with via this system. All bodily functions are managed by the brain.According to the classical doctrine of the nervous system, an animal's nervous system is a highly sophisticated component that coordinates its movements and sensory data by sending and receiving signals to and from various regions of its body.The nervous system notices bodily-impacting environmental changes, and then collaborates with the endocrine system to react to such occurrences. Around 550–600 million years ago, worm-like invertebrates were the first to develop nervous tissue. However, recent research on the existence and usage of electrical impulses in plants has cast doubt on this conventional wisdom.To learn more about Nervous System refer :
https://brainly.com/question/869589
#SPJ4
you need to make an aqueous solution of 0.164 m nickel(ii) sulfate for an experiment in lab, using a 125 ml volumetric flask. how much solid nickel(ii) sulfate should you add?
Aqueous solution is the category of fluid in which water serves as the solvent. Na+ Cl- is the symbol for a sodium chloride (NaCl) solution in water. Another name for sodium chloride is table salt (NaCl)
Aqueous does that imply liquid?The main distinction between a liquid and an aqueous substance is that a liquid is any fluid that is almost incompressible, whereas an aqueous substance is a liquid that contains a solvent such as water. Aqueous solutions are thus a class of liquid.
What is an example of an aqueous solution?Cola, saltwater, rain, acid, base, and salt solutions are a few examples of watery solutions. Any liquid that lacks water is an example of a solution that is not an aqueous solution.
To know more about aqueous solution visit :
https://brainly.com/question/14097392
#SPJ4
What is a full valence shell?.
A full valence shell electron configuration is the most stable. Other classes of elements have partially filled valence shells. a stable electron configuration to achieve
They then achieve a stable electron configuration by either gaining or losing electrons. They are capable of creating a stable configuration and an outer shell that is filled by adding or removing an electron. Atomic physics and quantum chemistry both refer to the electron configuration as the configuration of electrons in atomic or molecular orbitals of an atom, molecule, or other physical structure. known as an electron configuration. A single type of atom, each of whose nuclei has the same number of protons, makes up an element, which is a pure substance.
A pure substance known as an element is made up of only one sort of atom, each of whose nuclei contains the identical number of protons. The issue of how conceptually sound the word "element"
Learn more about electron configuration here
https://brainly.com/question/14283892
#SPJ4
a soft drink contains 47.0 carbohydrates per serving. calculate the number of nutritional calories (cal) per serving in this drink.
A soft drink that contains 47 grams of carbohydrates per serving has a nutritional calories (cal) per serving of 188 calories.
Calories are a measurement of energy released from your body after digestion and absorption of food whereas carbohydrate is a carbon-based organic compound consisting of carbon, hydrogen, and oxygen atoms with a general chemical molecular formula of CH₂O.
In order to get the number of nutritional calories per serving from a soft drink that has 47 grams of carbohydrate, we will need to multiply the number of grams by 4 since there are about 4 calories for every gram of carbohydrate, and the calculation is as follows:
47×4=188
Hence, there are 188 calories in a soft drink that contains 47 grams of carbohydrates.
To learn more about calories visit: brainly.com/question/1061571
#SPJ4
What are the 10 fire safety rules?.
The 10 fire safety rules are :
1. Installation of smoke alarms
2. Prepare your fire escape
3. Pay Attention to Smokers
4. Cook With Care
5. Leave Room for Space Heaters
6. Matches and lighters are not toys; they are tools.
7. Drop, Stop, and Roll
8. Use electricity sensibly.
9. Get Low in the Smoke
10. Install sprinkler systems in your home
Fire safety lowers the possibility of injuries and building damage that can result from fires. It is essential to everyone's safety who may be inside the building during a fire emergency to develop and implement fire safety measures in the workplace.
For more information on fire safety kindly visit to
https://brainly.com/question/28213410
#SPJ4
Albuterol is a sympathomimetic drug that binds to beta‐2 adrenergic receptors suggesting that.
Adenyl cyclase is activated by albuterol, which increases cyclic-3', 5'-adenosine monophosphate (cAMP) in the cells and -2 adrenergic receptors on airway smooth muscles.
What are adrenergic receptors?Adrenergic receptor is defined as the proteins that are membrane-bound and mediate the central and peripheral effects of norepinephrine and epinephrine. Adrenergic receptors are cell surface receptors that become active when they contact a particular class of neurotransmitter known as a catecholamine.
By soothing the smooth muscles in the bronchi, beta2 agonists treat reversible bronchospasm. These medications, which have bronchodilator properties, are used to treat acute asthmatic bouts of bronchospasm as well as to prevent it from happening in cases of exercise-induced asthma or nocturnal asthma.
Thus, Adenyl cyclase is activated by albuterol, which increases cyclic-3', 5'-adenosine monophosphate (cAMP) in the cells and -2 adrenergic receptors on airway smooth muscles.
To learn more about adrenergic receptors, refer to the link below:
https://brainly.com/question/12999789
#SPJ1
the ionization energy of o2 is 1205 kj/mol . what is the maximum wavelength of light capable of casuing the ionizaiton of o2
A light source's maximum wavelength at which o2 can ionize is 99.39nm.
How is calculated to maximum wavelength?The energy difference between these two energy levels is equal to the energy needed for this transformation. The data can be studied and displayed to find the wavelength of greatest extinction. As a result, the wavelength of light needed to excite the pi electrons to their first excited state is 43.948 nm.Calculation:-O2 has a 1205 kJ ionization energy.
Energy = hv
= h light's wavelength/velocity
wavelength = (1205000 3 108) /6.626 1034
99.39 nm is the wavelength.
He is symbolized by the highest ionization energy. The outermost shell has a high ionization energy, is stable, and does not frequently become unstable due to electron loss. Ionization can be induced by waves with energies greater than 134 nm. 225nm light lacks the energy to ionize gold because it is greater than 134nm.To Learn more about maximum wavelength refer to:
https://brainly.com/question/28739253
#SPJ4
When using a pH meter to monitor a stirring reaction mixture, where should you place the pH sensor electrode? Select one: O Between the stirring vortex and the side of the glassware In the middle of the stirring vortex of the solution Along the edge of the glassware O Suspended above the reaction mixture
While using a pH meter to monitor a stirring reaction mixture, the pH sensor electrode should be placed between the stirring vortex and the side of the glassware.
The pH meter is an electric device which is used to measure the hydrogen-ion activity in water-based solutions. This means that it is used to measure the pH of the solutions and determine which is the acidic or alkaline.
The pH meter is made up of a voltmeter which is attached to a pH-responsive electrode and a reference electrode.
The pH-responsive electrode is usually made of glass while the reference electrode is usually a silver–silver chloride electrode.
While monitoring the stirring reaction mixture, the pH-responsive electrode written above is usually placed between the stirring vortex and the side of the glassware.
Learn more about pH meter from the link given below.
https://brainly.com/question/28303361
#SPJ4
Does calcium and oxygen form an ionic bond?.
Calcium oxide, also known as CaO, is the chemical substance created when calcium and oxygen combine. Because their atoms have so many valence electrons, calcium and oxygen are able to create an ionic bond.
What is the structure of the valence electrons?For neutral atoms, the valence electron corresponds to the main group number. The main group number of an element in the periodic table can be found by looking at its column. For instance, the group 4 member carbon contains four valence electrons.
What does the valence of an element mean?In chemistry, an element's valence, also known as valency, determines how many other molecules of the same element each atom may interact with. The expression, which was used in 1868, is intended to convey an element's wide range of possible combinations as well as its numerical value.
To know more about valence electrons visit:
https://brainly.com/question/12717954
#SPJ4
agno3(aq)agno3(aq) and naf(aq)naf(aq) express your answer as a chemical equation. identify all of the phases in your answer. enter noreaction if no precipitate is formed
The reaction between silver nitrate and sodium fluoride produces silver fluoride precipitate and aqueous sodium nitrate as written below:
[tex]\rm Ag NO_{3} (aq) + NaF (aq) \rightarrow AgF (s) + NaNO_{3} (aq)[/tex]
What is displacement reactions?Displacement reaction is a type of reaction in which a group or atom in a reactant is displaced by another group. There are single displacement reaction and double displacement reaction.
In single displacement reaction, one group is replaced by the other group of reagent and in double displacement reactions, two groups are interchanged between two reactants.
The reaction of AgNO₃ and NaF is a double displacement reaction in which nitrate and F displaces to the other metal and producing the precipitate of AgF as written in the reaction.
To find more on displacement reactions, refer here:
https://brainly.com/question/29307794
#SPJ1
Which of the following are released from neurosecretory cells in the adrenal medulla as a result of sympathetic innervation? Check all that apply.
Epinephrine
ACh
Norepinephrine
ACTH
Epinephrine
Norepinephrine
Epinephrine and Norepinephrine of the following are released from neurosecretory cells in the adrenal medulla as a result of sympathetic innervation.
What does sympathetic innervation cause?The ability of your sympathetic nerves to react to risky or stressful conditions is its most well-known function. When this happens, your nervous system's sympathetic system kicks in to help you escape danger by increasing your heart rate, pumping more blood to regions of your body needing it, and other responses.
What effects on the heart does sympathetic innervation have?Cardiovascular consequences of the sympathetic nervous (SNS) include heart rate acceleration, maximum cardiac contractility, decreased arterial capacitance, and peripheral vascular resistance.
To know more about Sympathetic innervation visit:
https://brainly.com/question/29448963
#SPJ4
Is the safety flame yellow?.
Yes the yellow flame is called as the safety flame.
The yellow flame are called as the safety flame and its is the coolest Bunsen flame because the air hole is covered and the oxygen will burn is less with the gas that's means that the flame is not efficiently burn. an the hottest Bunsen flame is considered is the blue flame because the air hole hole is uncovered and the oxygen burn is more with the gas that means it is efficiently burn. the yellow flame is the safest flame.
Thus, Yes the yellow flame is called as the safety flame.
To learn more about yellow flame here
https://brainly.com/question/122441
#SPJ4
an ammonia buffer solution contains 0.22 m n h 4 and 0.24 m n h 3 . the pka of ammonium is 9.24. what is the ph of the buffer?
If 0.22 m n h 4 and 0.24 m n h 3 are present in an ammonia buffer solution, the buffer's pH is 9.28. Ammonium's pka is 9.24. Nitrogen and hydrogen combine to form the inorganic compound ammonia.
Ammonia is an odourless gas with a distinct pungent odor. It is a stable binary hydride and the simplest pnictogen hydride. In terms of biology, it is a typical nitrogenous waste, especially for aquatic organisms.
In order to create a buffer solution, a weak acid and salt, such as CH3COOH and CH3COONa, or a weak base, such as NH4OH and NH4Cl, are typically combined with salt. Is called buffer solution.
ph = 9.24+log(0.24/0.22)
ph = 9.24+0.04
ph = 9.28
Learn more about buffer solution here
https://brainly.com/question/24262133
#SPJ4
a 59.0 ml portion of a 1.50m solution is diluted to a total volume of 228ml. a 114 ml portion of that solution is diluted by adding 159ml of water. what is the final concentration? assume the volumes are additive.
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, molarity of diluted solution is 0.27M.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in liter. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
According to the neutralization law,
M₁V₁=M₂V₂
where,
M₁ = molarity of stock solution =1.50M
V₁ = volume of stock solution = 59.0 ml
M₂ = molarity of dilute solution =?
V₂ = volume of dilute solution =228ml
substituting all the given values we get
M₁V₁=M₂V₂
1.50M×59.0 ml=M₂×228
M₂=0.38M
Again diluting this solution
M₂×V₂=M₃×V₃
0.38×114=M₃×159
M₃=0.27M
Therefore, molarity of diluted solution is 0.27M.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
Why are valence electrons important in forming bonds?.
Valence electrons important in forming bonds because the formation of the ionic bond and the covalent bond depends on the valence electrons.
The valence electrons are those which are present on the outermost shell of the atom. the valence electron will cause the atoms are unreactive or the highly reactive.
The covalent bond is formed by the sharing of electrons between the atoms. The ionic bonds are formed by the transfer of the electrons between the atoms.
Thus, the valence electrons are those which decide the formation the bond whether it is ionic bond or the covalent bond between the atoms.
To learn more about valence electrons here
https://brainly.com/question/13936243
#SPJ4
Starting with acetylene, show the reagents you would use to prepare the following compound: 2,7-dimethyl-4-octyne 1) NaNH2 2) Br 1) NaNH2 2) Br 3) NaNH2 4) Br 1) NaNH2 2) Br 3) NaNH2 4) EtBr 1) NaNH2 2) EtBr 3) NaNH2 4) Br
The liquid form of 1-octene has no color. Flashpoint of 70 °F. Less dense (at about 6 lb/gal) and insoluble in water than water, as a result, floats on water.
Having the chemical formula CH2CHC6H13, 1-octene is an organic compound. The double bond in the alkene is in the alpha (primary) position, making the compound more reactive and giving it useful chemical properties. The alkene is also referred to as a higher olefin and alpha-olefin.
Learn more about 1-octene
https://brainly.com/question/11907688
#SPJ4
suppose of sodium nitrate is dissolved in of a aqueous solution of ammonium sulfate. calculate the final molarity of nitrate anion in the solution. you can assume the volume of the solution doesn't change when the sodium nitrate is dissolved in it. be sure your answer has the correct number of significant digits.
Ammonium ion molarity is equal to (0.03224/0.2) = 0.1612 mol/L or 0.16 M.
Is sulfate of ammonium hazardous to people?Breathing in ferrous ammonium can have negative effects on you. Inhaling ferrous ammonia can upset the nose and throat, which can lead to coughing and wheezing. Contact can sting the skin and eyes. High exposure may result in sleepiness, nausea, vomiting, diarrhea, and stomach pain.
Briefing2NH₄NO₃ + Na₂CrO₄ → (NH₄)₂CrO₄ + 2NaNO₃
We first convert the given parameters to number of moles
Number of moles = (Mass/Molar mass)
Molar mass of NH₄NO₃ = 80.043 g/mol
Number of moles of NH₄NO₃ = (2.59/80.043) = 0.03224 mole
Number of moles = (Concentration in mol/L) × (Volume in L)
Number of moles of Na₂CrO₄ = 0.4 × 0.2 = 0.08 Mole
2 moles of NH₄NO₃ react with 1 mole of Na₂CrO₄
So, it it evident that NH₄NO₃ is the limiting reagent as it is in short supply in the amount needed for the reaction.
So, the number of moles of ammonium ion in the product is also 0.03224 mole.
Molarity = (Number of moles)/(Volume L)
Molarity of ammonium ion = (0.03224/0.2) = 0.1612 mol/L = 0.16 M.
To know more about ammonium sulfate visit:
https://brainly.com/question/10834028
#SPJ4
Based on the standard EMF series and your knowledge of half-reactions, determine the cell potential and spontaneity of a cell that consists of a pure cobalt electrode in a solution of Co?" ions; the other half is a lead electrode immersed in a Ni2+ solution. PT + 7 Pb Sn + 2S N. + 2 Ni Co + 2 Co -0.126 -0.136 -0.250 -0.277 +0.027V, spontaneous -0.027 V, nonspontaneous +0.527, spontaneous -0.527, nonspontaneous
Oxidation Reaction is not same as the Reduction,we need to change sign of ( Ev ) as well as Lies and RHS as shown cell potential =+ 0.027 V
cell potential = ( Ev ) Red" + ( Ev )oxidation
=- 0250 + 0.277
=+ 0.027 V
The potential differential between the two electrodes of an electrochemical cell, which develops when electrons are sent via the external circuit of a cell that has not reached equilibrium, is known as the cell potential. A voltaic cell's electrical potential is a measurement of its capacity to generate an electric current. Typically, electrical potential is expressed in volts (V). The electrical potential difference between the two half-cells determines the voltage that a specific voltaic cell will generate.
Learn more about cell potential here:
https://brainly.com/question/1313684
#SPJ4
classify each compound as an ionic compound or a molecular compound. you are currently in a sorting module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. ionic compounds molecular compounds
Each compound as an ionic compound or a molecular compound :
CO₂ : molecular compound
NaBr : ionic compound
FeCl₃ : ionic compound
CH₄ : molecular compound.
The ionic compounds are those which are formed by the positively charged cation and the negatively charged anion with ionic bond and the complete transfer of electrons take place. the molecular compounds are those which are formed by the sharing of electrons. CO₂ : molecular compound. NaBr : ionic compound. FeCl₃ : ionic compound. CH₄ : molecular compound.
Thus, Each compound as an ionic compound or a molecular compound :
CO₂ : molecular compound
NaBr : ionic compound
FeCl₃ : ionic compound
CH₄ : molecular compound.
To learn more about ionic compound here
https://brainly.com/question/20713667
#SPJ4
chemical labels are required to disclose disposal information alongside cautions and directions for use. true false
A hazardous chemical's labels must have the following information: Name, Address, and Telephone Number; Product Identifier; Signal Word; Hazard Statement(s); and Precautionary Statement (s) Pictogram (s) The label may read, Do not breathe vapors or spray.
What are the requirements for chemical labels?For everybody who comes into contact with the chemical that is labeled, each label will offer useful information. A chemical's hazards are described in the hazard statement. The user will be informed as to the risk level, for example, "Contact with the skin can cause cancer." On the label, this must be clearly visible.The warning label will explain and outline the precautions that must be taken by the user to avoid or reduce the risks of the chemical. There are four categories of precautionary statements:ResponsePreventionStorageDisposalThe contact information is crucial because it contains details about the chemical's maker. The data that's going to be shown is the;NameAddressTelephone numberTo Learn more About chemical's labels refer to:
https://brainly.com/question/17069021
#SPJ4
What types of materials are best for preventing heat transfer through radiation?.
Answer:
Insulation helps to prevent that transfer of heat. Many different materials are used for insulation. Engineers often use fiberglass, wool, cotton, paper (wood cellulose), straw and various types of foams to insulate buildings. A layer of trapped air can serve as insulation, too!
Explanation:
Answer:
insulators
Explanation:
radiation insulators are materials with a high resistivity (resistivity is a property of the material) so they can make objects with high resistance. This allows insulators to prevent heat from escaping.
