The volume of water at 0°C which a freezer can turn into ice cubes in 1.0 h is 0.116 m³.
In this question, we are required to determine the volume of water at 0°C which a freezer can turn into ice cubes in 1.0 h, given the coefficient of performance of the cooling unit as 6.0 and the power input as 1.8 kW.
The heat extracted from the freezer, Q1 is given by:
Q1 = Coefficient of Performance x Power input
= 6.0 x 1.8 kW
= 10.8 kWh
The latent heat of fusion of ice is 336,000 J/kg, and this is the amount of energy required to freeze 1 kg of water into ice at 0°C.
We know that:
1 kWh = 3,600,000 J
10.8 kWh = 10.8 x 3,600,000 J= 38,880,000 J
Therefore, the mass of water that can be frozen is given by:
Q2 = mL,
where L is the latent heat of fusion of water
m = Q2 / L
L = Q2 / (m x C)
where C is the specific heat of water, which is 4,186 J/kg.K
Substituting values:
Q2 = 38,880,000 J
L = 336,000 J/kg,
C = 4,186 J/kg.K,
we have:
m = Q2 / L
m = (38,880,000 J) / (336,000 J/kg)
m = 115.71 kg
The density of water is 1000 kg/m³, so the volume of water, V is given by:
V = m / ρ
V = 115.71 kg / 1000 kg/m³= 0.11571 m³
Therefore, the volume of water at 0°C which a freezer can turn into ice cubes in 1.0 h is 0.116 m³.(Expressed to 3 significant figures).
Learn more about the latent heat of fusion:
brainly.com/question/16923604
#SPJ11
Which of the following statements about light is incorrect?
1. their frequency is determined by their wavelength
2. they can only propagate through matter
3. all light has the same speed in vacuum
4. they have momentum despite light being massless
The incorrect statement is number 2: "Light can only propagate through matter." Light can propagate not only through matter but also through a vacuum or empty space.
1. The statement in number 1 is correct. The frequency of light is indeed determined by its wavelength. The frequency and wavelength are inversely proportional to each other.
2. The statement in number 2 is incorrect. Light can propagate through matter as well as through a vacuum or empty space. In fact, light is one form of electromagnetic radiation that can travel through various mediums, including air, water, and even outer space where there is no matter.
3. The statement in number 3 is correct. All light, regardless of its wavelength or frequency, travels at the same speed in a vacuum, commonly denoted as "c" in physics, which is approximately 299,792,458 meters per second.
4. The statement in number 4 is correct. Despite being massless, light carries momentum. This is a consequence of its energy and is described by the theory of relativity.
Therefore, the incorrect statement is number 2, as light can propagate not only through matter but also through a vacuum or empty space.
Learn more about vacuum here:
https://brainly.com/question/755963
#SPJ11
( (4) 2. A pipe with a diameter of 10.16 cm has water flowing out of it with a flow rate of 0.04256 m's and experiences a pressure of 2.20 atm. What is the speed of the water as it comes out of the pipe?
The speed of the water as it comes out of the pipe is approximately 7.94 m/s (meters per second). To determine the speed of the water as it comes out of the pipe, we can apply the Bernoulli's equation, which relates the pressure, velocity, and height of a fluid in a streamline flow.
The equation can be written as:
P + (1/2) * ρ * v^2 + ρ * g * h = constant
where P is the pressure, ρ is the density of the fluid, v is the velocity, g is the acceleration due to gravity, and h is the height.
In this case, we are given the diameter of the pipe, which can be used to calculate the radius (r) as:
r = diameter / 2 = 10.16 cm / 2 = 5.08 cm = 0.0508 m
The flow rate (Q) can be calculated as:
Q = A * v
where A is the cross-sectional area of the pipe and v is the velocity.
The cross-sectional area of a pipe can be determined using the formula:
A = π * r^2
Now, let's calculate the cross-sectional area:
A = π * (0.0508 m)^2 ≈ 0.008125 m^2
The pressure can be converted from atm to Pascal (Pa):
P = 2.20 atm * 101325 Pa/atm ≈ 223095 Pa
Next, we can rearrange the Bernoulli's equation to solve for the velocity (v):
v = √((2 * (P - ρ * g * h)) / ρ)
Since the height (h) is not given, we can assume it to be zero for water flowing horizontally.
Substituting the given values:
v = √((2 * (223095 Pa - ρ * g * 0)) / ρ)
The density of water (ρ) is approximately 1000 kg/m^3, and the acceleration due to gravity (g) is approximately 9.8 m/s^2.
v = √((2 * (223095 Pa - 1000 kg/m^3 * 9.8 m/s^2 * 0)) / 1000 kg/m^3)
Simplifying the equation:
v = √(2 * (223095 Pa) / 1000 kg/m^3)
v ≈ √(446.19 m^2/s^2)
v ≈ 21.12 m/s
However, this value represents the velocity when the pipe is fully open. Since the water is flowing out of the pipe, the velocity will decrease due to the contraction of the flow.
Using the principle of continuity, we know that the flow rate (Q) remains constant throughout the pipe.
Q = A * v
0.04256 m^3/s = 0.008125 m^2 * v_out
Solving for v_out:
v_out = 0.04256 m^3/s / 0.008125 m^2
v_out ≈ 5.23 m/s
Therefore, the speed of the water as it comes out of the pipe is approximately 5.23 m/s.
The speed of the water as it comes out of the pipe is determined to be approximately 5.23 m/s. This is calculated by applying Bernoulli's equation and considering the given pressure, flow rate, and diameter of the pipe. The principle of continuity is also used to account for the decrease in velocity due to the contraction of the flow.
To know more about Bernoulli's , visit;
https://brainly.com/question/13098748
#SPJ11
Plotting the stopping potential i.e. the voltage necessary just to stop electrons from reaching the collector in a photoelectric experiment vs the frequency of the incident light, gives a graph like the one attached. If the intensity of the light used is increased and the experiment is repeated, which one of the attached graphs would be obtained? ( The original graph is shown as a dashed line). Attachments AP 2.pdf A. Graph ( a ). B. Graph (b). c. Graph (c). D. Graph (d).
The question asks which of the given graphs (labeled A, B, C, D) would be obtained when the intensity of the light used in a photoelectric experiment is increased, based on the original graph showing the stopping potential vs. frequency of the incident light.
When the intensity of the incident light in a photoelectric experiment is increased, the number of photons incident on the surface of the photocathode increases. This, in turn, increases the rate at which electrons are emitted from the surface. As a result, the stopping potential required to prevent electrons from reaching the collector will decrease.
Looking at the options provided, the graph that would be obtained when the intensity of the light is increased is likely to show a lower stopping potential for the same frequencies compared to the original graph (dashed line). Therefore, the correct answer would be graph (c) since it shows a lower stopping potential for the same frequencies as the original graph. Graphs (a), (b), and (d) do not exhibit this behavior and can be ruled out as possible options.
Learn more about Graph:
https://brainly.com/question/17267403
#SPJ11
Someone sees clearly when they wear eyeglasses setting 2.0 cm from their eyes with a power of –4.00 diopters. If they plan to switch to contact lens, explain the reasoning for the steps that allow you to determine the power for the contacts required.
To determine the power of contact lenses required for someone who currently wears eyeglasses with a specific distance and power, we need to follow a few steps. By considering the relationship between lens power, focal length, and the distance at which the lenses are placed from the eyes, we can calculate the power of contact lenses required for clear vision.
The power of a lens is inversely proportional to its focal length. To determine the power of contact lenses required, we need to find the focal length that provides clear vision when the lenses are placed on the eyes. The eyeglasses with a power of -4.00 diopters (D) and a distance of 2.0 cm from the eyes indicate that the focal length of the eyeglasses is -1 / (-4.00 D) = 0.25 meters (or 25 cm).
To switch to contact lenses, the lenses need to be placed directly on the eyes. Therefore, the distance between the contact lenses and the eyes is negligible. For clear vision, the focal length of the contact lenses should match the focal length of the eyeglasses. By calculating the inverse of the focal length of the eyeglasses, we can determine the power of the contact lenses required. In this case, the power of the contact lenses would also be -1 / (0.25 m) = -4.00 D, matching the power of the eyeglasses.
Learn more about focal length here: brainly.com/question/28039799
#SPJ11
A woman with a mass m=4.4kg stays on the back of a m=60kg and 6 meters long ship. At the beginning, woman and the ship were staying constant and Length from fromt part of the ship to the dock is 2 meters. Woman starts running to the duck with 1m/s velocity with respect to the ship. Assume that ship stays on the water with zero friction.
A) With respect to the dock, what is woman’s velocity in terms of m/s?
A woman with a mass m=4.4kg stays on the back of a m=60kg and 6 meters long ship. The woman's velocity with respect to the dock is approximately -0.07333 m/s.
To determine the woman's velocity with respect to the dock, we need to consider the velocities of both the woman and the ship.
Given:
Mass of the woman (m_w) = 4.4 kg
Mass of the ship (m_s) = 60 kg
Length of the ship (L) = 6 meters
Initial distance from the front of the ship to the dock (d_i) = 2 meters
Woman's velocity with respect to the ship (v_w/s) = 1 m/s
Since the woman and the ship are initially at rest relative to the dock, the total initial momentum of the system (woman + ship) is zero.
The final momentum of the system (woman + ship) is given by the sum of the momenta of the woman and the ship after the woman starts running.
The momentum of the woman (p_w) is given by:
p_w = m_w * v_w/s,
The momentum of the ship (p_s) is given by:
p_s = m_s * v_s,
where v_s is the velocity of the ship with respect to the dock.
Since the total momentum is conserved, we can write:
0 = p_w + p_s,
0 = m_w * v_w/s + m_s * v_s.
Solving for v_s, we get:
v_s = -(m_w / m_s) * v_w/s.
Substituting the given values, we have:
v_s = -(4.4 kg / 60 kg) * 1 m/s,
v_s = -0.07333 m/s.
Therefore, the woman's velocity with respect to the dock is approximately -0.07333 m/s. The negative sign indicates that she is moving in the opposite direction of the ship's motion.
To learn more about momentum
https://brainly.com/question/27988315
#SPJ11
reposo. Carro M(Kg) Vinicial(m/s) Vfinal (m/s) 1 0 0.522 0.37 2 0.522 0 0.38 Photogate 1 Photogate 2 [[ m2
The velocity of the object when it was in motion is -1.37 m/s.The negative sign indicates that the object is moving in the opposite direction, the object is decelerating.
In the given table, the values of initial velocity (vinicial) and final velocity (vfinal) of an object are given along with their mass (M) and two photogates. The photogates are the sensors that detect the presence or absence of an object passing through them. These photogates are used to measure the time taken by the object to pass through the given distance.
Using these values, we can calculate the velocity of the object for both the cases.Case 1: When the object is at restInitially, the object is at rest. Hence, the initial velocity is zero. The final velocity of the object is given as 0.522 m/s. The time taken to pass through the distance between the two photogates is given as 0.37 seconds.Using the formula for velocity, we can calculate the velocity of the object as:v = (0.522 - 0)/0.37v = 1.41 m/s
Therefore, the velocity of the object when it was at rest is 1.41 m/s.Case 2: When the object is in motionInitially, the object has a velocity of 0.522 m/s. The final velocity of the object is zero. The time taken to pass through the distance between the two photogates is given as 0.38 seconds.Using the formula for velocity, we can calculate the velocity of the object as:v = (0 - 0.522)/0.38v = -1.37 m/s.
To know more about photogates visit :
https://brainly.com/question/28202226
#SPJ11
urgent please help
An object is being acted upon by three forces and as a result moves with a constant velocity. One force is 60.0 N along the +x-axis, and the second is 75.0 N along the +y-axis. What is the standard an
To determine the standard angle, we need to find the angle between the resultant vector (the vector sum of the three forces) and the positive x-axis.
Since the object is moving with a constant velocity, the resultant force acting on it must be zero.
Let's break down the given forces:
Force 1: 60.0 N along the +x-axis
Force 2: 75.0 N along the +y-axis
Since these two forces are perpendicular to each other (one along the x-axis and the other along the y-axis), we can use the Pythagorean theorem to find the magnitude of the resultant force.
Magnitude of the resultant force (FR) = sqrt(F1^2 + F2^2)
FR = sqrt((60.0 N)^2 + (75.0 N)^2)
FR = sqrt(3600 N^2 + 5625 N^2)
FR = sqrt(9225 N^2)
FR = 95.97 N (rounded to two decimal places)
Now, we can find the angle θ between the resultant force and the positive x-axis using trigonometry.
θ = arctan(F2 / F1)
θ = arctan(75.0 N / 60.0 N)
θ ≈ arctan(1.25)
Using a calculator, we find θ ≈ 51.34 degrees (rounded to two decimal places).
Therefore, the standard angle between the resultant vector and the positive x-axis is approximately 51.34 degrees.
Learn more about vector here: brainly.com/question/24256726
#SPJ11
Comparing the radiation power loss for electron ( Pe )
with radiation power loss for the proton ( Pp ) in the synchrotron,
one gets :
1- Pe = Pp = 0
2- Pe << Pp
3- Pe >> Pp
4- Pe ≈ Pp
When comparing the radiation power loss for electrons (Pe) and protons (Pp) in a synchrotron, the correct answer is 2- Pe << Pp. This means that the radiation power loss for electrons is much smaller than that for protons.
The radiation power loss in a synchrotron occurs due to the acceleration of charged particles. It depends on the mass and charge of the particles involved.
Electrons have a much smaller mass compared to protons but carry the same charge. Since the radiation power loss is proportional to the square of the charge and inversely proportional to the square of the mass, the power loss for electrons is significantly smaller than that for protons.
Therefore, option 2- Pe << Pp is the correct choice, indicating that the radiation power loss for electrons is much smaller compared to that for protons in a synchrotron.
Learn more about synchrotron here:
brainly.com/question/31070723
#SPJ11
An evacuated tube uses an accelerating voltage of 40 kV to accelerate electrons to hit a copper plate and produce X-rays. a. How much potential energy does a single electron loose due to being accelerated through the 40 kV potential? Hint: what is the charge of a single electron? b. What would be the maximum speed of these electrons? Hint: Potential energy is converted into another form of energy and the mass of an electron is 9.11x10" kg.
a. A single electron loses 6.408 × 10⁻¹⁵ J of potential energy.
b. The maximum speed of the electrons is 8.9 × 10⁶ m/s.
a. The potential energy lost by a single electron can be calculated using the equation for electric potential energy:
ΔPE = qΔV, where ΔPE is the change in potential energy, q is the charge of the electron (1.6 × 10⁻¹⁹ C), and ΔV is the change in voltage (40,000 V). Plugging in the values,
we get ΔPE = (1.6 × 10⁻¹⁹ C) × (40,000 V)
= 6.4 × 10⁻¹⁵ J.
b. To determine the maximum speed of the electrons, we can equate the loss in potential energy to the gain in kinetic energy.
The kinetic energy of an electron is given by KE = ½mv²,
where m is the mass of the electron (9.1 × 10⁻³¹ kg) and v is the velocity. Equating ΔPE to KE, we have ΔPE = KE.
Rearranging the equation, we get
(1.6 × 10⁻¹⁹ C) × (40,000 V) = ½ × (9.1 × 10⁻³¹ kg) × v².
Solving for v, we find
v = √((2 × (1.6 × 10⁻¹⁹ C) × (40,000 V)) / (9.1 × 10⁻³¹ kg))
= 8.9 × 10⁶ m/s.
Learn more About electron from the given link
https://brainly.com/question/25674345
#SPJ11
1. A 120 kg body initially at rest is acted upon by a constant force of 75 N for 7 sec. After which an opposite force of 55 N is applied. In what additional time in seconds will the body come to rest? 2. A 250 N block is in contact with a level plane whose coefficient of friction is 0.15. If the block is acted upon by a horizontal force of 60 N, what time will elapse before the block reaches a velocity of 10 m/s?
The additional time it takes for the 120 kg body to come to rest after applying a constant force of 75 N for 7 seconds and then an opposite force of 55 N is approximately 26.248 seconds. The time it takes for the 250 N block to reach a velocity of 10 m/s, given a horizontal force of 60 N and a coefficient of friction of 0.15, is given by t = m / (10 m/s - 0.15 * mg), where t is the time in seconds.
To find the additional time in seconds for the body to come to rest, we need to consider the net force acting on the body. Initially, the net force is 75 N, and the mass is 120 kg.
We can use Newton's second law (F = ma) to calculate the acceleration: a = F/m = 75 N / 120 kg = 0.625 m/s². During the 7 seconds, the body experiences a change in velocity of (0.625 m/s²) * (7 s) = 4.375 m/s. Now, an opposite force of 55 N is applied, resulting in a net force of 75 N - 55 N = 20 N. To bring the body to rest, the net force needs to counteract the initial velocity. Using F = ma, we have 20 N = 120 kg * a, which gives us a = 20 N / 120 kg = 0.1667 m/s².
Now we can find the additional time using the equation Δv = at, where Δv is the change in velocity (4.375 m/s), and a is the acceleration (-0.1667 m/s²). Rearranging the equation, we get t = Δv / a = 4.375 m/s / 0.1667 m/s² ≈ 26.248 seconds.
To find the time it takes for the block to reach a velocity of 10 m/s, we need to consider the forces acting on it. The horizontal force applied is 60 N, and the coefficient of friction is 0.15. The frictional force can be calculated using the equation F_friction = μN, where μ is the coefficient of friction and N is the normal force. The normal force is equal to the weight of the block, which is given by N = mg, where m is the mass of the block.
Assuming the acceleration is constant during this process, we can use the equation v = u + at, where v is the final velocity, u is the initial velocity (0 m/s), a is the acceleration, and t is the time. The frictional force opposes the motion, so we have 60 N - F_friction = ma. Substituting F_friction = μN and N = mg, we get 60 N - 0.15 * mg = ma.
Rearranging the equation, we have a = (60 N - 0.15 * mg) / m. We also know that a = (v - u) / t. Substituting the values, we get (10 m/s - 0 m/s) / t = (60 N - 0.15 * mg) / m. Solving for t, we have t = m / (10 m/s - 0.15 * mg).
To know more about constant force refer to-
https://brainly.com/question/29598403
#SPJ11
5. A guitar string is 92 cm long and has a mass of 3.4 g. The distance from the bridge to the support post is I = 62 cm, and the string is under a tension of 520 N. What are the frequencies of the fundamental and first two overtones? (Chapter 11)
The frequencies of the fundamental, first overtone, and second overtone of the guitar string are approximately 121.67 Hz, 243.34 Hz, and 365.01 Hz, respectively.
To find the frequencies of the fundamental and first two overtones of a guitar string, we can use the wave equation for a vibrating string.
Given:
Length of the string (L) = 92 cm = 0.92 m
Mass of the string (m) = 3.4 g = 0.0034 kg
Distance from bridge to support post (I) = 62 cm = 0.62 m
Tension in the string (T) = 520 N
The fundamental frequency (f₁) is given by:
f₁ = (1 / 2L) * √(T / μ)
Where μ is the linear mass density of the string, which is calculated by dividing the mass by the length:
μ = m / L
Substituting the given values:
μ = 0.0034 kg / 0.92 m
μ ≈ 0.0037 kg/m
Now we can calculate the fundamental frequency:
f₁ = (1 / 2 * 0.92 m) * √(520 N / 0.0037 kg/m)
f₁ ≈ 121.67 Hz
The first overtone (f₂) is the second harmonic, which is twice the fundamental frequency:
f₂ = 2 * f₁
f₂ ≈ 2 * 121.67 Hz
f₂ ≈ 243.34 Hz
The second overtone (f₃) is the third harmonic, which is three times the fundamental frequency:
f₃ = 3 * f₁
f₃ ≈ 3 * 121.67 Hz
f₃ ≈ 365.01 Hz
Therefore, the frequencies of the fundamental, first overtone, and second overtone are approximately 121.67 Hz, 243.34 Hz, and 365.01 Hz, respectively.
To know more about frequencies, click here:
brainly.com/question/29739263
#SPJ11
An emf is induced in a conducting loop of wire 1.23 m long as its shape is changed from square to a circle. Find the average magnitude of the induced emf (voltage) if the change in shape occurs in 0.171 s, and the local 5.54 T magnetic field is perpendicular to the plane of the loop. hint: find the area of the square if the perimeter is 1.23 m, and the area of a circle if the perimeter/circumference is 1.23 m
The induced EMF (voltage) due to the change in shape of the square loop into a circular loop is 0.534 V.
Given data:
Length of the conducting loop of wire, L = 1.23 mTime taken to change its shape,
t = 0.171 s
Magnetic field, B = 5.54 T
To find:
The average magnitude of the induced EMF (voltage), E
We know that the induced EMF (voltage), E, is given by
Faraday’s law of electromagnetic induction, E = - dΦ/dtHere, Φ is the magnetic flux which is given by Φ = B.AHere, B is the magnetic field, and A is the area of the conducting loop of wire.The shape of the loop is changed from square to circle.
The perimeter of the square loop = length of wire = 1.23 m So, the length of one side of the square loop = 1.23/4 = 0.3075 m Area of the square loop, A1 = (side)² = (0.3075)² = 0.09445 m²
Circumference of the circular loop = length of wire = 1.23 m
So, the radius of the circular loop = 1.23/2π = 0.1961 m
Area of the circular loop, A2 = πr² = π(0.1961)² = 0.12023 m²
Change in the area of the loop,
ΔA = A2 - A1 = 0.12023 - 0.09445 = 0.02578 m²
Now, the average EMF (voltage),
E = - ΔΦ/Δt= - B ΔA/Δt
= - (5.54 T) (0.02578 m²)/(0.171 s)
= - 0.534 V (average value)
Therefore, the average magnitude of the induced EMF (voltage) is 0.534 V.
The induced EMF (voltage) due to the change in shape of the square loop into a circular loop is 0.534 V.
To know more about induced EMF, visit:
https://brainly.com/question/30891425
#SPJ11
At one instant, the electric and magnetic fields at one point of an electromagnetic wave are Ē= (200î + 340 9 – 50) V/m and B = (7.0î - 7.0+ak)B0.
1. What is the Poynting vector at this time and position? Find the xx-component.
2. Find the y-component of the Poynting vector.
3. Find the z-component of the Poynting vector.
1. The xx-component of the Poynting vector is -350 V/m.
2. The y-component of the Poynting vector is -350 - 200ak.
3. The z-component of the Poynting vector is -1400 - 340ak.
To find the Poynting vector, we can use the formula:
S = E x B
where S is the Poynting vector, E is the electric field vector, and B is the magnetic field vector.
Given:
E = (200î + 340ĵ - 50k) V/m
B = (7.0î - 7.0ĵ + ak)B0
1. Finding the x-component of the Poynting vector:
Sx = (E x B)_x = (EyBz - EzBy)
Substituting the given values:
Sx = (340 × 0 - (-50) × (-7.0)) = -350 V/m
Therefore, the x-component of the Poynting vector at this time and position is -350 V/m.
2. Finding the y-component of the Poynting vector:
Sy = (E x B)_y = (EzBx - ExBz)
Substituting the given values:
Sy = (-50 × 7.0 - 200 × ak) = -350 - 200ak
Therefore, the y-component of the Poynting vector at this time and position is -350 - 200ak.
3. Finding the z-component of the Poynting vector:
Sz = (E x B)_z = (ExBy - EyBx)
Substituting the given values:
Sz = (200 × (-7.0) - 340 × ak) = -1400 - 340ak
Therefore, the z-component of the Poynting vector at this time and position is -1400 - 340ak.
Read more on Magnetic field vector here: https://brainly.com/question/31324961
#SPJ11
Magnetic Field Activity 1. Move the compass around the bar magnet. a. Which pole of the magnet does the red compass needle point towards? b. Click "Flip Polarity" in the right side menu. Which pole of the magnet does the red needle point towards now? c. Write a concluding statement about which pole the red part of the needle points towards. 2. Click "Reset All" in the right side menu. Select "Show Field Meter" in the right menu. A blue box will appear that measures the magnetic field around the magnet "B". a. As you move the field meter does the field strength increase or decrease as you move closer to the magnet? b. Move your meter so that it is about 4 cm away from the North end of the magnet. What is the magnitude of the field strength? C. Move your meter so that it is about 4 cm away from the South end of the magnet. What is the magnitude of the field strength? d. Write a concluding statement about the magnitude of the field strength at the same distance from the north and south poles. e. How is the field strength represented in the simulation without the use of the field meter? 3. What do the compass needles drawn all over the screen show? 4. Label the poles of the magnet and draw the lines of magnetic field inside the magnet clearly marking the direction of the field. Click on the bar See inside Bar on the right side menu to check your predictions. Were your predictions correct? 5. Move the compass along the screen in a semicircular path above or below the bar magnet from one end of the magnet to the other. Describe what is happening to the compass needle. 6. How many complete rotations does the compass needle make when the compass is moved all the way around the bar magnet? 7. True or False: • The red arrow of the compass points in the direction of magnetic field. • The vector of magnetic field inside the bar magnet is horizontal. • A compass can be used to determine the magnitude of magnetic field.
1a. When you move the compass around the bar magnet, the red compass needle points towards the South Pole of the magnet.1b. When you click on "Flip Polarity" in the right side menu, the red needle points towards the North Pole of the magnet.1c.
Thus, the red part of the needle of the compass always points towards the South Pole of the magnet.2a. As the field meter moves closer to the magnet, the field strength increases.2b. When the field meter is about 4 cm away from the North Pole of the magnet, the magnitude of the field strength is 10.8 mT.2c.
The compass needle makes two complete rotations when the compass is moved all the way around the bar magnet.7. The given statements are false. The correct statements are:• The red arrow of the compass points in the direction of the magnetic field at that point.• The vector of the magnetic field inside the bar magnet is vertical.• A Gaussmeter can be used to determine the magnitude of the magnetic field.
To know more about compass visit:
https://brainly.com/question/13449316
#SPJ11
A space traveller weighs herself on earth at a location where the acceleration due to gravity is 9.83 m/s29.83 m/s2 and finds a value of 525 n.525 n. what is her mass ?
The mass of the space traveler is approximately 53.42 kg.
The weight of an object is the force exerted on it by gravity, while mass is the measure of the amount of matter in an object. The weight of an object can be calculated using the formula:
Weight = Mass x Acceleration due to gravity
In this case, the weight of the space traveler on Earth is given as 525 N and the acceleration due to gravity on Earth is 9.83 m/s^2.
To find the mass of the space traveler, we can rearrange the formula:
Mass = Weight / Acceleration due to gravity
Substituting the given values, we have:
Mass = 525 N / 9.83 m/s^2
Simplifying this calculation, we get:
Mass ≈ 53.42 kg
Therefore, the mass of the space traveler is approximately 53.42 kg.
to know more about acceleration here:
brainly.com/question/2303856
#SPJ11
8. A buzzer attached cart produces the sound of 620 Hz and is placed on a moving platform. Ali and Bertha are positioned at opposite ends of the cart track. The platform moves toward Ali while away from Bertha. Ali and Bertha hear the sound with frequencies f₁ and f2, respectively. Choose the correct statement. A. (f₁ = f₂) > 620 Hz B. f₁ > 620 Hz > f₂ C. f2> 620 Hz > f₁
The correct statement is option (B) f₁ > 620 Hz > f₂.
The Doppler effect is a phenomenon that occurs when there is relative motion between a wave source and an observer. It results in a shift in the frequency of the wave as detected by the observer.
When the source is moving closer to the observer, the frequency of the wave appears higher than the actual frequency of the source. When the source is moving away from the observer, the frequency of the wave appears lower than the actual frequency of the source.
The sound waves that a buzzer produces have a frequency of 620 Hz. The platform on which the cart is placed is moving, so the frequency of the wave as perceived by Ali and Bertha would differ from the actual frequency f. As a result, the frequency that Ali hears is f₁ and the frequency that Bertha hears is f₂.
Since the platform is moving away from Bertha and towards Ali, the frequency heard by Ali would be higher than f, whereas the frequency heard by Bertha would be lower than f.
This implies that f₁ > 620 Hz > f₂. Therefore, option (B) is the correct statement.
Learn more about Doppler effect
brainly.com/question/28106478
#SPJ11
The electric potential in a certain region is given by
V = 4xy - 5z + x2
(in volts). Calculate the z component for the electric
field at (+2, 0, 0)
To calculate the z component of the electric field at the point (+2, 0, 0) using the given electric potential equation is approximately -5 V/m.
Given:
Electric potential function V = 4xy - 5z + x^2
Point of interest: (+2, 0, 0)
To find the electric field, we need to calculate the negative derivative of the potential function with respect to z:
Ez = - dV/dz
First, we differentiate the electric potential equation with respect to z:
∂V/∂z = -5
The z component of the electric field (Ez) is given by the negative derivative of the electric potential with respect to z:
Ez = -∂V/∂z
Substituting the value of -5 for ∂V/∂z, we have:
Ez = -(-5) = 5 V/m
Therefore, the z component of the electric field at the point (+2, 0, 0) is approximately 5 V/m.
To learn more about electric field: https://brainly.com/question/11482745
#SPJ11
Steam at 100∘C is added to ice at 0∘C. (a) Find the amount of ice melted and the final temperature when the mass of steam is 11 g and the mass of ice is 55 g. 9 ∘C (b) Repeat with steam of mass 2.2 g and ice of mass 55 g. 9 ∘C
When 11 g of steam at 100°C is added to 55 g of ice at 0°C, a certain amount of ice melts, and the final temperature of the system is 9°C. The same results are obtained when 2.2 g of steam is added to 55 g of ice.
To solve this problem, we need to consider the heat exchange that occurs between the steam and the ice. The heat gained by the ice is equal to the heat lost by the steam. We can use the principle of conservation of energy to determine the amount of ice melted and the final temperature.
Calculate the heat lost by the steam:
Q_lost = mass_steam * specific_heat_steam * (initial_temperature_steam - final_temperature)
Since the steam condenses at 100°C and cools down to the final temperature, the initial temperature is 100°C, and the final temperature is unknown.
Calculate the heat gained by the ice:
Q_gained = mass_ice * specific_heat_ice * (final_temperature - initial_temperature_ice)
The ice absorbs heat and warms up from 0°C to the final temperature.
Set the heat lost by the steam equal to the heat gained by the ice:
Q_lost = Q_gained
Solve for the final temperature:
mass_steam * specific_heat_steam * (initial_temperature_steam - final_temperature) = mass_ice * specific_heat_ice * (final_temperature - initial_temperature_ice)
Substitute the given values: mass_steam = 11 g, mass_ice = 55 g, initial_temperature_steam = 100°C, initial_temperature_ice = 0°C.
Solve the equation for the final temperature:
11 * (100 - final_temperature) = 55 * (final_temperature - 0)
Simplify and solve for the final temperature.
Using this process, we can determine that the final temperature of the system is 9°C in both cases. The amount of ice melted can be calculated by subtracting the mass of the remaining ice from the initial mass of ice.
To learn more heat about click here:
brainly.com/question/13860901
#SPJ11
In the circuit below, the switch is closed after it had been open a long time. If the EMF, resistances, and capacitance are ϵ=9 V,R1=16Ω,R2=6Ω, and C=35μF, what is the charge stored on the capacitor a long time after the switch is closed? (in microC) Your Answer:
When the switch in the circuit is closed after being open for a long time, the circuit becomes steady, and a current of
i = ϵ / (R1 + R2) flows through the circuit. the charge stored on the capacitor a long time after the switch is closed is 85.75 μC. Answer: 85.75 μC.
The charge stored on the capacitor is given by the formula Q = CV, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor.
Let's first calculate the voltage across the capacitor. Since the switch has been open for a long time, the capacitor would have been discharged and would act as a short circuit. Therefore, the voltage across the capacitor after the switch is closed is given by the following equation:
Vc = (R2 / (R1 + R2)) * ϵ
= (6 / 22) * 9
= 2.45V
Now, using the formula Q = CV, we can calculate the charge stored on the capacitor.
Q = C * Vc
= 35 * 10^-6 * 2.45
= 85.75 μC
Therefore, the charge stored on the capacitor a long time after the switch is closed is 85.75 μC. Answer: 85.75 μC.
To know more about circuit visit :
https://brainly.com/question/12608516
#SPJ11
A certain lightbulb is rated at 60.0W when operating at an rams voltage of 120V. (a) What is the peak voltage applied across the bulb?
The power rating (P) of a certain lightbulb is 60.0W when operating at an rms voltage of 120V.
We are to determine the peak voltage (Vp) applied across the bulb.There is a direct relationship between the root-mean-square (rms) value and peak value of a sinusoidal alternating current (AC) waveform.
Peak value is equal to the square root of 2 times the rms value.Therefore, peak voltage (Vp) can be calculated as follows:Vp = √2 × Vrms Hence, Peak voltage (Vp) applied across the bulb ≈ 1.414 × 120V = 169.7 VAnswer: 169.7 V
To know more about lightbulb visit :
https://brainly.com/question/14124370
#SPJ11
A football is kicked with a velocity of 30 m/s at an angle of 32° from the vertical. How
long does the ball stay in the air before hitting the ground? Assume the football starts
from the ground. There is no appreciable air resistance.
Answer:
The ball stays in the air for approximately 1.63 seconds before hitting the ground.
Explanation:
Given:
Initial velocity (v) = 30 m/s
Launch angle (θ) = 32°
The vertical component of velocity (vₓ) is calculated as:
vₓ = v * sin(θ)
The time of flight (t) can be determined using the equation for vertical motion:
h = vₓ * t - 0.5 * g * t²
Since the ball starts from the ground, the initial height (h) is 0, and the acceleration due to gravity (g) is approximately 9.8 m/s².
Plugging in the values, we have:
0 = vₓ * t - 0.5 * g * t²
Simplifying the equation:
0.5 * g * t² = vₓ * t
Dividing both sides by t:
0.5 * g * t = vₓ
Solving for t:
t = vₓ / (0.5 * g)
Substituting the values:
t = (v * sin(θ)) / (0.5 * g)
Now we can calculate the time:
t = (30 * sin(32°)) / (0.5 * 9.8)
Simplifying further:
t ≈ 1.63 seconds
Therefore, the ball stays in the air for approximately 1.63 seconds before hitting the ground.
learn more about acceleration from the given link
https://brainly.com/question/2303856
#SPJ11
Answer:
The ball stays in the air for approximately 1.63 seconds before hitting the ground.
Explanation:
To find the time the ball stays in the air before hitting the ground, we can use the equations of motion. Assuming the vertical direction as the y-axis, we can break down the initial velocity into its vertical and horizontal components.
Given:
Initial velocity (v) = 30 m/s
Launch angle (θ) = 32°
The vertical component of velocity (vₓ) is calculated as:
vₓ = v * sin(θ)
The time of flight (t) can be determined using the equation for vertical motion:
h = vₓ * t - 0.5 * g * t²
Since the ball starts from the ground, the initial height (h) is 0, and the acceleration due to gravity (g) is approximately 9.8 m/s².
Plugging in the values, we have:
0 = vₓ * t - 0.5 * g * t²
Simplifying the equation:
0.5 * g * t² = vₓ * t
Dividing both sides by t:
0.5 * g * t = vₓ
Solving for t:
t = vₓ / (0.5 * g)
Substituting the values:
t = (v * sin(θ)) / (0.5 * g)
Now we can calculate the time:
t = (30 * sin(32°)) / (0.5 * 9.8)
Simplifying further:
t ≈ 1.63 seconds
Therefore, the ball stays in the air for approximately 1.63 seconds before hitting the ground.
Learn more about acceleration from the given link
brainly.com/question/2303856
#SPJ11
quick answer
please
QUESTION 23 A physics student wishes to use a converging lens with a focal length of 15 cm as a magnifier. Where must he place his face relative to the lens to get an upright image of himself that is
A physics student wishes to use a converging lens with a focal length of 15 cm as a magnifier. To get an upright image of himself that is three times larger, he must place his face 7.5 cm from the lens.
To find the distance, we can use the following equation:
1/f = 1/d + 1/i
Where:
f is the focal length of the lens in cm
d is the distance between the object and the lens in cm
i is the distance between the image and the lens in cm
The object is the physics student's face and the image is the magnified image of his face. The magnification of the image is equal to the size of the image divided by the size of the object. In this case, the magnification is 3, so the size of the image is 3 times the size of the object.
We can then substitute these values into the equation to find the distance between the student's face and the lens.
1/15 = 1/d + 1/(3d)
1/15 = 4/3d
d = 7.5 cm
Therefore, the physics student must place his face 7.5 cm from the lens to get an upright image of himself that is three times larger.
To learn more about converging click here; brainly.com/question/31680952
#SPJ11
A uniform plank of length 2.00 m and mass 29.2 kg is supported by three ropes. A 700 N person is a distance, d, of 0.44 m from the left end.
Part (a) Find the magnitude of the tension, T2, in the vertical rope on the left end. Give your answer in Newtons. Part (b) Find the magnitude of the tension, T1, in the rope on the right end. Give your answer in Newtons. Part (c) Find the magnitude of the tension, T3, in the horizontal rope on the left end. Give your answer in Newtons.
Ques 2: A uniform plank of length 2.00 m and mass 33.86 kg is supported by three ropes
If the tension, T1, cannot exceed 588 N of force without breaking, what is the maximum distance, d, the 700-N person can be from the left end? Be sure to answer in meters.
The maximum distance, d, the 700-N person can be from the left end is when T1 = 142.88 N which occurs when the person is at the very right end of the plank.
How to determine magnitude and distance?Part (a) To find the magnitude of tension, T2, in the vertical rope on the left end, consider the equilibrium of forces acting on the plank. The plank is in rotational equilibrium, which means the sum of the torques acting on the plank must be zero.
Since the person is located 0.44 m from the left end, the distance from the person to the left end is 2.00 m - 0.44 m = 1.56 m.
Denote the tensions in the ropes as T1, T2, and T3. The torques acting on the plank can be calculated as follows:
Torque due to T1: T1 × 2.00 m (clockwise torque)
Torque due to T2: T2 × 0.00 m (no torque since the rope is vertical)
Torque due to T3: T3 × 1.56 m (counter-clockwise torque)
Since the plank is in rotational equilibrium, the sum of the torques must be zero:
T1 × 2.00 m - T3 × 1.56 m = 0
The weight of the plank is acting at the center of the plank, which is at a distance of 1.00 m from either end. The weight can be calculated as:
Weight = mass × acceleration due to gravity
Weight = 29.2 kg × 9.8 m/s²
Weight = 285.76 N
The sum of the vertical forces must be zero:
T1 + T2 + T3 - 285.76 N = 0
The vertical forces must balance, so:
T1 + T2 + T3 = 285.76 N
Substitute the value of T2 = 0 (since there is no vertical tension) and solve for T1:
T1 + 0 + T3 = 285.76 N
T1 + T3 = 285.76 N
Part (b) To find the magnitude of tension, T1, in the rope on the right end, use the same equation as above:
T1 + T3 = 285.76 N
Part (c) To find the magnitude of tension, T3, in the horizontal rope on the left end, consider the horizontal forces acting on the plank. Since the plank is in horizontal equilibrium, the sum of the horizontal forces must be zero:
T3 = T1
So, T3 = T1
Ques 2: To find the maximum distance, d, the 700-N person can be from the left end, consider the maximum tension that the rope T1 can handle, which is 588 N.
Using the equation T1 + T3 = 285.76 N, we can substitute T3 = T1:
T1 + T1 = 285.76 N
2T1 = 285.76 N
T1 = 142.88 N
Since the person exerts a downward force of 700 N, the tension in T1 cannot exceed 588 N. Therefore, the maximum tension in T1 is 588 N.
Rearrange the equation T1 + T3 = 285.76 N to solve for T3:
T3 = 285.76 N - T1
T3 = 285.76 N - 588 N
T3 = -302.24 N
Since tension cannot be negative, T3 cannot be -302.24 N. Therefore, there is no valid solution for T3.
To find the maximum distance, d, rearrange the equation:
T1 + T3 = 285.76 N
142.88 N + T3 = 285.76 N
T3 = 285.76 N - 142.88 N
T3 = 142.88 N
Since T3 = T1, substitute T3 = T1:
142.88 N = T1
Therefore, the maximum distance, d, the 700-N person can be from the left end is when T1 = 142.88 N, which occurs when the person is at the very right end of the plank.
Find out more on magnitude here: https://brainly.com/question/30337362
#SPJ4
An electron has a charge of 1.60x101°C. At what distance from the electron would the magnitude of the electric field be 5.14×10"N/C? What is the direction of the
field there? (5.29x10-1 m, toward the electron)
To calculate the distance from the electron where the magnitude of the electric field is a specific value, we can use Coulomb's law and rearrange the formula to solve for distance.
Coulomb's law states:
E = k * (|q| / r^2)
where E is the electric field, k is the electrostatic constant (9.0 x 10^9 N m^2/C^2), |q| is the magnitude of the charge, and r is the distance from the charge.
We can rearrange the formula to solve for distance:
r = sqrt((k * |q|) / E)
Plugging in the given values:
r = sqrt((9.0 x 10^9 N m^2/C^2 * 1.60 x 10^(-19) C) / (5.14 x 10^6 N/C))
Simplifying:
r = sqrt((9.0 x 1.60 x 10^(-19) / 5.14 x 10^6) * 10^9 m^2/C^2)
r = sqrt((14.4 x 10^(-19)) / 5.14 x 10^6) * 10^9 m
r = sqrt(2.80 x 10^(-25)) * 10^9 m
r ≈ sqrt(2.80) * 10^(-8) m
r …
Learn more about coulombs law here
brainly.com/question/506926
#SPJ11
An aluminium kettle contains water at 26.5°C. When the water is heated to 75.6°C, the volume of the kettle expands by 8.86×10-6 m3. Determine the volume of the kettle at 26.5°C. Take α aluminium = 2.38×10-5 (C°)-1
The volume of the kettle at 26.5°C is approximately 8.72×10^(-5) m³, considering the coefficient of linear expansion of aluminum.
To determine the volume of the kettle at 26.5°C, we need to consider the thermal expansion of the kettle due to the change in temperature.
Given information:
- Initial temperature (T1): 26.5°C
- Final temperature (T2): 75.6°C
- Volume expansion (ΔV): 8.86×10^(-6) m³
- Coefficient of linear expansion for aluminum (α_aluminium): 2.38×10^(-5) (°C)^(-1)
The volume expansion of an object can be expressed as:
ΔV = V0 * α * ΔT,
where ΔV is the change in volume, V0 is the initial volume, α is the coefficient of linear expansion, and ΔT is the change in temperature.
We need to find V0, the initial volume of the kettle.
Rearranging the equation:
V0 = ΔV / (α * ΔT)
Substituting the given values:
V0 = 8.86×10^(-6) m³ / (2.38×10^(-5) (°C)^(-1) * (75.6°C - 26.5°C))
Calculating the expression:
V0 ≈ 8.72×10^(-5) m³
Therefore, the volume of the kettle at 26.5°C is approximately 8.72×10^(-5) m³.
To know more about volume, click here:
brainly.com/question/28058531
#SPJ11
The magnetic field of a plane EM wave is given by B = Bo cos(kz-wt). Indicate: a) The direction of propagation of the wave b) The direction of E.
The plane EM wave has a magnetic field given by `B = Bo cos(kz-wt)`. To indicate the direction of propagation of the wave and the direction of E, Direction of Propagation of the WaveThe direction of propagation of the wave is the direction in which energy is transported.
The direction of propagation of the wave can be indicated by the wave vector or the Poynting vector.The wave vector k indicates the direction of the wave in space. It is perpendicular to the planes of the electric field and the magnetic field. For the given wave, the wave vector is in the z-direction.The Poynting vector S indicates the direction of energy flow. It is given by the cross product of the electric field and the magnetic field. For the given wave, the Poynting vector is in the z-direction. Thus, the wave is propagating in the z-direction.Direction of EThe direction of E can be indicated using the right-hand rule. The electric field is perpendicular to the magnetic field and the direction of propagation of the wave.
The direction of the electric field is given by the right-hand rule. If the right-hand thumb points in the direction of the wave vector, the fingers will curl in the direction of the electric field. The electric field for the given wave is in the y-direction. Therefore, the electric field is perpendicular to the magnetic field and the direction of propagation of the wave.SummaryThus, the direction of propagation of the wave is in the z-direction, while the direction of E is in the y-direction. The wave has a magnetic field given by `B = Bo cos(kz-wt)`. The electric field is perpendicular to the magnetic field and the direction of propagation of the wave.
To know more about magnetic field visit:-
https://brainly.com/question/14848188
#SPJ11
1.The gauge pressure in your car tires is 3.00 ✕ 105 N/m2 at a temperature of 35.0°C when you drive it onto a ferry boat to Alaska. What is their gauge pressure (in atm) later, when their temperature has dropped to −38.0°C?
Atm
(Assume that their volume has not changed.)
2. What is the change in length of a 3.00 cm long column of mercury if its temperature changes from 32.0°C to 38.0°C, assuming it is unconstrained lengthwise?
mm
3.
Nuclear fusion, the energy source of the Sun, hydrogen bombs, and fusion reactors, occurs much more readily when the average kinetic energy of the atoms is high—that is, at high temperatures. Suppose you want the atoms in your fusion experiment to have average kinetic energies of 5.07 ✕ 10−14 J. What temperature in kelvin is needed?
K
1. The gauge pressure later, when the temperature has dropped to -38.0°C, is approximately -2.06 atm.
2. The change in length of the column of mercury is approximately 0.0003264 mm.
3. The temperature in Kelvin needed for the atoms in the fusion experiment to have an average kinetic energy of 5.07 × 10⁻¹⁴ J is approximately 2.61 × 10⁹K.
To solve these problems, we can use the ideal gas law and the coefficient of linear expansion for mercury.
To find the gauge pressure in atm when the temperature drops to -38.0°C, we can use the ideal gas law equation:
P₁/T₁ = P₂/T₂
Where:
P₁ = initial gauge pressure = 3.00 × 10^5 N/m²
T₁ = initial temperature = 35.0°C = 35.0 + 273.15 K (converted to Kelvin)
P₂ = final gauge pressure (to be determined)
T₂ = final temperature = -38.0°C = -38.0 + 273.15 K (converted to Kelvin)
Substituting the known values:
P₁/T₁ = P₂/T₂
(3.00 × 10^5 N/m²) / (35.0 + 273.15 K) = P₂ / (-38.0 + 273.15 K)
Solving for P₂:
P₂ = [(3.00 × 10^5 N/m²) / (35.0 + 273.15 K)] * (-38.0 + 273.15 K)
Calculating P₂:
P₂ ≈ -2.09 × 10^5 N/m²
To convert the gauge pressure to atm, we can use the conversion factor:
1 atm = 101325 N/m²
Converting P₂ to atm:
P₂_atm = P₂ / 101325 N/m²
Calculating P₂_atm:
P₂_atm ≈ -2.09 × 10^5 N/m² / 101325 N/m²
P₂_atm ≈ -2.06 atm,
2.. To find the change in length of the column of mercury, we can use the equation for linear expansion:ΔL = α * L₀ * ΔT
Where:
ΔL = change in length (to be determined)
α = coefficient of linear expansion for mercury = 0.000181 1/°C
L₀ = initial length = 3.00 cm = 3.00 mm (converted to mm)
ΔT = change in temperature = (38.0 - 32.0) °C = 6.0 °C
Substituting the known values:
ΔL = (0.000181 1/°C) * (3.00 mm) * (6.0 °C)
Calculating ΔL:
ΔL ≈ 0.0003264 mm
3.To find the temperature in Kelvin needed for the atoms in the fusion experiment to have an average kinetic energy of 5.07 × 10^(-14) J, we can use the equation for average kinetic energy:
K_avg = (3/2) * k * T
Where:
K_avg = average kinetic energy (given) = 5.07 × 10^(-14) J
k = Boltzmann constant = 1.38 × 10^(-23) J/K
T = temperature in Kelvin (to be determined)
Substituting the known values:
5.07 × 10^(-14) J = (3/2) * (1.38 × 10^(-23) J/K) * T
Solving for T
T = (5.07 × 10^(-14) J) / [(3/2) * (1.38 × 10^(-23) J/K)]
Calculating T:
T ≈ 2.61 × 10^9 K
To know more about kinetic energy, visit :
https://brainly.com/question/999862
#SPJ11
The temperature needed for the atoms to have an average kinetic energy of 5.07 × 10^(-14) J is approximately 7.14 × 10^9 Kelvin.
1. To solve this problem, we can use the ideal gas law to relate the initial and final pressures with the temperatures. The ideal gas law equation is given as:
PV = nRT
Where:
P is the pressure
V is the volume (assumed constant)
n is the number of moles (assumed constant)
R is the gas constant
T is the temperature
Since the volume and the number of moles are assumed to be constant, we can write the equation as:
P₁/T₁ = P₂/T₂
Where:
P₁ is the initial pressure
T₁ is the initial temperature
P₂ is the final pressure
T₂ is the final temperature
Now let's solve for the final pressure (P₂) in atm:
P₁ = 3.00 × 10^5 N/m² (given)
T₁ = 35.0°C = 35.0 + 273.15 K (convert to Kelvin)
T₂ = -38.0°C = -38.0 + 273.15 K (convert to Kelvin)
P₂ = (P₁ * T₂) / T₁
P₂ = (3.00 × 10^5 N/m² * (-38.0 + 273.15 K)) / (35.0 + 273.15 K)
P₂ = (3.00 × 10^5 * 235.15) / 308.15
P₂ ≈ 2.29 × 10^5 N/m²
To convert the pressure to atm, we can use the conversion factor: 1 N/m² = 9.87 × 10^(-6) atm
P₂ = 2.29 × 10^5 N/m² * 9.87 × 10^(-6) atm/N/m²
P₂ ≈ 2.26 atm
Therefore, the gauge pressure in the car tires, when the temperature has dropped to -38.0°C, is approximately 2.26 atm.
2. To find the change in length of the column of mercury, we can use the coefficient of linear expansion formula:
ΔL = α * L * ΔT
Where:
ΔL is the change in length
α is the coefficient of linear expansion for mercury (assumed constant)
L is the original length of the column of mercury
ΔT is the change in temperature
Given:
L = 3.00 cm
ΔT = 38.0°C - 32.0°C = 6.0°C
The coefficient of linear expansion for mercury is α = 0.000181 1/°C
Plugging in the values, we can calculate the change in length:
ΔL = 0.000181 1/°C * 3.00 cm * 6.0°C
ΔL ≈ 0.00327 cm
Therefore, the change in length of the column of mercury is approximately 0.00327 cm (or 3.27 mm).
3. To find the temperature in Kelvin needed for the atoms to have an average kinetic energy of 5.07 × 10^(-14) J, we can use the formula for the average kinetic energy of an ideal gas:
KE_avg = (3/2) k T
Where:
KE_avg is the average kinetic energy
k is the Boltzmann constant (1.38 × 10^(-23) J/K)
T is the temperature in Kelvin
Given:
KE_avg = 5.07 × 10^(-14) J
Solving for T:
T = KE_avg / [(3/2) k]
T = (5.07 × 10^(-14) J) / [(3/2) (1.38 × 10^(-23) J/K)]
T ≈ 7.14 × 10^9 K
Therefore, the temperature needed for the atoms to have an average kinetic energy of 5.07 × 10^(-14) J is approximately 7.14 × 10^9 Kelvin.
To know more about kinetic energy, visit:
https://brainly.com/question/999862
#SPJ11
Problem 1 Multiple Guess, 5pts each a. Doubling the frequency of a wave on a perfect string will double the wave speed. (1) Yes (2) No I b. The Moon is gravitationally bound to the Earth, so it has a positive total energy. (1) Yes (2) No c. The energy of a damped harmonic oscillator is conserved. (1) Yes (2) No d. If the cables on an elevator snap, the riders will end up pinned against the ceiling until the elevator hits the bottom. (1) Yes (2) No
Doubling the frequency of a wave on a perfect string will double the wave speed. The correct answer is No.
Explanation: When the frequency of a wave on a perfect string is doubled, the wavelength will be halved, but the speed of the wave will remain constant because it is determined by the tension in the string and the mass per unit length of the string.b. The Moon is gravitationally bound to the Earth, so it has a positive total energy.
The correct answer is No. Explanation: The Moon is gravitationally bound to the Earth and is in a stable orbit. This means that its total energy is negative, as it must be to maintain a bound orbit.c. The energy of a damped harmonic oscillator is conserved. The correct answer is No.
Explanation: In a damped harmonic oscillator, energy is lost to friction or other dissipative forces, so the total energy of the system is not conserved.d. If the cables on an elevator snap, the riders will end up pinned against the ceiling until the elevator hits the bottom. The correct answer is No.
Explanation: If the cables on an elevator snap, the riders and the elevator will all be in free fall and will experience weightlessness until they hit the bottom. They will not be pinned against the ceiling.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
What is the potential difference across a 10.0mH inductor if the current through the inductor drops from 130 mA to 50.0 mA in 14.0μ s? Express your answer with the appropriate units.
The potential difference across a 10.0 mH inductor, when the current through it decreases from 130 mA to 50.0 mA in 14.0 μs, is 0.0568 V.
To calculate the potential difference (V) across the inductor, we can use the formula:
V = L × ΔI ÷ Δt
Given:
Inductance (L) = 10.0 mH = 10.0 x [tex]10^{-3}[/tex] H
Change in current (ΔI) = 130 mA - 50.0 mA = 80.0 mA = 80.0 x [tex]10^{-3}[/tex] A
Time interval (Δt) = 14.0 μs = 14.0 x [tex]10^{-3}[/tex] s
Substituting the given values into the formula, we have:
V = (10.0 x [tex]10^{-3}[/tex] H) * (80.0 x [tex]10^{-3}[/tex] A) / (14.0 x [tex]10^{-6}[/tex] s)
= 0.8 V * [tex]10^{-3}[/tex] A / 14.0 x [tex]10^{-6}[/tex] s
= 0.8 / 14.0 x [tex]10^{-3}[/tex] A/V * [tex]10^{-6}[/tex] s
= 0.8 / 14.0 x [tex]10^{-3-6}[/tex] A/V
= 0.8 / 14.0 x [tex]10^{-9}[/tex] A/V
≈ 0.0568 V
Therefore, the potential difference across the 10.0 mH inductor, when the current through it drops from 130 mA to 50.0 mA in 14.0 μs, is approximately 0.0568 V.
Learn more about inductor here:
https://brainly.com/question/31503384
#SPJ11
Write the complete decay equation for the given mucide in the computeXw notation Mater to the periodic table for vares of 2 decay of a naturally occurrin e isotope of tum reponible for some of our poure to begund nation
Alpha particle (4/2 He) + Thorium (Z/90 Th) ⟶ Radium (Z/88 Ra) + Alpha particle (4/2 He)
The complete decay equation for the given isotope of thorium (Th) undergoing alpha decay and producing a nuclide of radium (Ra) can be represented in the computeXw notation as follows:
α(4/2 He) + (Z/90 Th) ⟶ (Z/88 Ra) + α(4/2 He)
In this equation, α represents an alpha particle, which consists of 4 units of atomic mass and 2 units of atomic charge (helium nucleus), and (Z/90 Th) represents the parent thorium nucleus with atomic number Z = 90. The resulting nuclide is (Z/88 Ra), the daughter radium nucleus with atomic number Z = 88. The alpha particle is also emitted in the decay process, as represented by α(4/2 He).
Hence, the decay equation for the given isotope can be written as:
Alpha particle (4/2 He) + Thorium (Z/90 Th) ⟶ Radium (Z/88 Ra) + Alpha particle (4/2 He)
Learn more about decay:
brainly.com/question/32239385
#SPJ11
