If a gas had an initial temperature od 20.65 C and a final temperature of 41.77 C, its initial volume would be 7.979.
How are volume and example used?The volume of any solid in three dimensions is equal to the area it occupy. These solids include shapes like a cube, cuboid, conical, cylinder, and sphere. The form affects how much volume there is.
What does a gas' volume mean?The space occupied by the gaseous particles under typical pressure and temperature circumstances is referred to as the volume of gas. It has the symbol "V." The symbol for volume in the SI is "liters," or "L". When the gas is at normal temperature, a mole has a volume of 24 m3, or 24 000 cm3. The molar volume of a gas is this quantity.
To know more about volume visit:
https://brainly.com/question/24086520
#SPJ13
Can yall help me with this
The summary of the paragraph is that if you live on a high latitude there would be greater seasonal variation.
What is the equator?The equator is said to be that imaginary line that does divide the earth into the Northern and the southern Hemispheres. This implies that the equator is the line that divides the earth into to halves and the two haves of the earth are responsible for the variations in many things on earth such as the day and night experience.
We can see from the passage that if you are living in a position that is closer to the equator then it follows that the variation of day and night would have less difference as well as less of seasonal differences.
Learn more about equator:https://brainly.com/question/10822895
#SPJ1
Solution X has a pH of 8, and Solution Y has a pH of 3.
Which option describes Solution X and Solution Y?
Responses
Solution X and Solution Y are both bases.
Solution X and Solution Y are both bases.
Solution X is an acid, and Solution Y is a base.
Solution X is an acid, and Solution Y is a base.
Solution X and Solution Y are both acids.
Solution X and Solution Y are both acids.
Solution X is a base, and Solution Y is an acid.
Answer:
Solution X is a base, and solution Y is an acid
Explanation:
PH for acidic is 1 to 6
PH for neutral is 7
PH for alkaline is 8 to 14
What can you say to the movie san andreas you've watch?
It appears that your answer contains either a link or inappropriate words. Please correct and submit again!
This is what it keeps saying when I want to answer so I have commented my answer below:
Select the statement(s) that accurately describe what a pedigree chart shows.
A. Future predictions of inherited genes
B. Specific alleles being inherited by offspring
C. Inherited traits in a family
D. Male and female family members
E. Genotypes and phenotypes being inherited
A pedigree chart shows Inherited traits in a family; the correct option is C
What is a pedigree chart?A pedigree chart is a chart that shows how traits are passed on from parents to offspring.
A pedigree chart is used in the study of inheritance or genetics.
A pedigree chart can for example be used to study the inheritance pattern of traits such as sickle cell anemia. In such a pedigree chart, the genotype of the parents is used to study how the trait is being transferred and can also predict the likelihood of the offspring of the parents inheriting that trait.
A pedigree chart can also be used to backtrace how a particular trait came into a particular family.
In conclusion, a pedigree chart is a chart that shows how traits are passed on from the parents and offspring of a family.
Learn more about pedigree at: https://brainly.com/question/11887612
#SPJ1
Explain why you selected the rock you did in Question 1. Which characteristics helped you make a decision?
You take in that you need to make a decision. Try to notice and define the nature of the decision you must make. This first step is very important.
What are the first characteristics of decision-making?Decision-making requires the identification and selection of alternatives on the basis of values, linking, requirements, and beliefs. To begin the procedure objectives must be defined, classified, and ordered in the order of their importance. Decision-making involves the recognition and selection of alternatives on the basis of values, preferences, concerns, and beliefs. Decision-making means selecting a course of action from two or more alternative strategic decision-making (SOM) is of great and growing importance.
So we can conclude that attribute of Decision Making · It is a process of selecting a course of action from among the alternative courses of action.
Learn more about Decision-making here: https://brainly.com/question/1249089
#SPJ1
9. Which of the following are diatomic elements?
Bromine
lodine
Boron
Hydrogen
what type of quantitative chemical method was used to determine the precise concentration of hydroxide in the experiment?
The type of quantitative chemical method was used to determine the precise concentration of hydroxide in the experiment is titration.
Titration is quantitative chemical method used to determine the concentration of unknown solution by using the known concentration of solution. the solution with the known concentration is called as the titrant. the solution of the unknown concentration is called as analyte. titrant is added from burette to known quantity of solution of unknown concentration that is analyte until the reaction is complete.
Thus, The type of quantitative chemical method was used to determine the precise concentration of hydroxide in the experiment is titration.
To learn more about Quantitative method here
https://brainly.com/question/14728680
#SPJ4
concentrated nitric acid usually has a density of 1.4 g/ml and is 70% hno3 by mass (the rest is water). find the concentration of water in such a solution in mol/l.
The concentration of water in such a solution in mol/l is 0.0157 M.
Molar concentration is a measure of the concentration of a chemical species, particularly of a solute in an answer, in phrases of quantity of a substance per unit quantity of solution. In chemistry, the most commonly used unit for molarity is the range of moles consistent with liter, having the unit symbol mol/L or mol/dm³ in the SI unit.
Molarity (M) is the quantity of a substance in a certain volume of solution. Molarity is described as the moles of a solute consistent with liters of an answer. Molarity is likewise called the molar attention of a solution.
Calculation:-
The density of the solution is 1.41 g/mL.
1000 g of the solution will have a volume = Mass/ Density
= 1000 / 1.41
=709 ml.
The mass percent of nitric acid is 70%.
1000 g of the solution will have = 1000× 70/100
=690 g of nitric acid.
The molarity of the solution is = Mass of nitric acid / The molar mass of nitric acid ×Volume of solution.
Mass of nitric acid = 700 / 63×709
= 0.0157 M.
Learn more about molarity here:-https://brainly.com/question/26873446
#SPJ4
does a change in temperature affect the solubility of nh3? if yes, at which temperature would nh3 be most soluble? does pressure change has effect on the solubility of nh3? if yes, at which pressure would nh3 be most soluble?
Yes as the temperature increases the solubility of NH3 will decrease and as we increase the pressure solubility of NH3 increases.
Solubility is defined as the maximum amount of substance that will dissolve in a given amount of solvent at a given or specified temperature. Based on solubility different types of solutions can be obtained. A saturated solution is a solution where a saturated solution is a solution where a given amount of solute is completely soluble in the solution.
Whereas a supersaturated solution are those where solute starts precipitating out after a certain concentration.
Temperature does effect the solubility of NH3 because as the temperature increases the hydrogen bonding also decreases, due to which the NH3 molecules are no longer able to bind to water molecules hence their solubility decreases.
But as we increase the pressure on NH3 molecules the bonding with the water molecules will be higher and therefore the solubility also increases.
To know more about solubility
https://brainly.com/question/1326791
#SPJ4
A typical Heliox mixture contains He at a partial pressure of 0.75 atm and O2 at a partial pressure of 0.35 atm. What is the total pressure of the Heliox mixture?
Considering the Dalton's partial pressure, the the total pressure of the Heliox mixture is 1.1 atm.
Dalton's partial pressureDalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
[tex]P_{T}[/tex]= P₁ +P₂ + ... + Pₙ
where n is the amount of gases present in the mixture.
This relationship is due to the assumption that there are no attractive forces between the gases.
Total pressure of the Heliox mixtureIn this case, the total pressure of the Heliox mixture is calculated as:
[tex]P_{T} =P_{He} +P_{O_{2} }[/tex]
Being:
[tex]P_{He}[/tex]= 0.75 atm[tex]P_{O_{2} }[/tex]= 0.35 atmthe total pressure of the Heliox mixture is
[tex]P_{T}[/tex]= 0.75 atm + 0.35 atm
[tex]P_{T}[/tex]= 1.1 atm
Finally, the total pressure is 1.1 atm.
Learn more about Dalton's law:
brainly.com/question/12898189
brainly.com/question/14239096
brainly.com/question/25181467
brainly.com/question/14119417
#SPJ1
What is the purpose of the glass heat shield? Why is it important?
A heat shield is essentially a thermal barrier intended to keep things from overheating. The automotive industry to isolate the engine block to stop heat damage to the bodywork and internal parts.
What is a heat shield used for?A heat shield is essentially a thermal barrier intended to keep things from overheating. They are frequently employed in the automotive industry to separate the engine to stop heat damage to the bodywork and internal parts.
What occurs if a heat shield is absent?If the heat becomes too high, plastic engine parts may melt or deform, and belts may also become damaged. You should schedule a visit with your mechanic right away if you start to smell burning emanating from your car or discover that the engine hood is too hot to touch.
To know more about Heat shield visit:
https://brainly.com/question/3588418
#SPJ13
which property is a chemical property of a substance
Answer:
reactivity, flammability,toxicity some more
3 straight chains of 12 carbon atoms are shown. 2 oxygen atoms are at the end of each row and connect the carbon atoms to a row of 3 carbon atoms. each carbon atom is attached to hydrogen atoms. which type of lipid is shown? a saturated phospholipid a saturated triglyceride an unsaturated phospholipid an unsaturated triglyceride
Three straight chains containing 12 carbon atoms, 2 oxygen atoms at the end is a saturated triglyceride.
What are saturated triglycerides?
Saturated triglycerides contain entirely of carbon-carbon single bonds in the structure. They have higher melting point compared to unsaturated triglycerides. Consuming saturated triglycerides in the large amount may lead to several cardiovascular diseases. Foods with high concentration of saturated triglycerides are butter, some fatty meats and cheese.
The saturated triglycerides are made up of carbon-carbon single bonds containing maximum number of hydrogen atoms. Unlike, saturated fats, unsaturated fats have carbon-carbon double bonds in them.
Therefore, 3 straight chains containing 12 carbon atoms, 2 oxygen atoms at the end is a saturated triglyceride.
To learn more about triglycerides click on the given link https://brainly.com/question/23737740
#SPJ4
when the ionic solute k3po4 is dissolved in water, what can you say about the number of potassium ions present in the solution compared with the number of phosphate ions in the solution?
We can say that When K3PO4 is dissolved in water , the number of potassium ions present in the solution is three times the number of phosphate ions in the solution .
What are Ionic compounds ?
Ionic compounds can be defined as ionic bonds or chemical bonds formed by oppositely charged ions held together by electrostatic forces.
These are usually formed between metals and non-metals. Atoms always tend to acquire stable electronic configurations when atoms lose electrons to form cations, and anions are formed when atoms gain electrons. These two oppositely charged atoms together form an ionic bond, which is called an ionic bond.
Ionic compounds, also called ionic compounds, are held together by electrostatic forces. Ionic compounds are also formed when the electronegativity difference between two atoms is large. This causes one atom to attract more electrons than the other, resulting in electron loss and electron gain within the atom.
To known more about Ionic compounds ,click the given link ;
https://brainly.com/question/22760798
#SPJ4
what happens to electrons to form an ionic bond?
Answer:
search-icon-header
Search for questions & chapters
search-icon-image
Class 10
>>General Knowledge
>>Basic Science
>>Basic Chemistry
>>What happens to electrons when an ionic
Question
Bookmark
What happens to electrons when an ionic bond forms?
Medium
Solution
verified
Verified by Toppr
It is the prior distribution of electrons that constitutes the electrostatic force of interaction..
Explanation:
Commonly, ions are formed by (i) the loss of electrons from metals... electron rich materials from the left of the Periodic Tables as we face the Table, whose valence electrons are furthest removed from the positively charged nuclear core... and (ii) the gain of electrons by non-metals to the right of the Periodic Table as we face it.
We could represent these processes by the reaction...
M→M
n+
+ne
−
oxidation
X+e
−
→X
−
reduction
We add the two redox processes together in such a way that the electrons are eliminated as virtual particles and we get a neutral salt... of a material and a non-metal that are held together by a strong electrostatic force of attraction...
M+nX→MX
n
And thus the electrons are formally redistributed to give positive and negative ions that combine to form NEUTRAL SALTS.
explain why it is not necessary to weigh the flask and the unknown volatile liquid before the initial heating.
As per this case the test tube will be heated so the unwanted gas will be wiped out and only the vapors of our gas will sustain in the flask
what are flasks used for?
There are different types of flasks used in chemistry laboratories they are mainly used for weighing chemicals, preparing stock solutions, preparing reacting solutions and many more.
The test tube will only contain the vapour that is necessary to compute the molar mass because, as you heat this gas, you are producing enough vapour to drive away the air and keep the liquid's vapour present. so that there is no need to weigh the flask before heating the volatile liquid
To learn more about laboratory instruments like flasks go through the given link: https://brainly.com/question/12396310
#SPJ4
what nacl concentration results when 264 ml of a 0.650 m nacl solution is mixed with 617 ml of a 0.470 m nacl solution?
The new concentration results in 0.512 M.
The concentration of a substance is the quantity of solute found in a given amount of solution. Concentrations are normally expressed in terms of molarity, defined because of the variety of moles of solute in 1 L of answer.
Calculation:-
final conc=m1v1+m2v2/(v1+v2)
final conc=209 × 0.71+407 ×0.41/(407+209)
final conc = 0.512 M
Concentration is the abundance of a constituent divided by way of the overall volume of an aggregate. several sorts of mathematical descriptions may be outstanding: mass concentration, molar concentration, variety concentration, and extent awareness.
The Concentration of an answer is a measure of the quantity of solute that has been dissolved in a given amount of solvent or answer. A concentrated answer is one that has a rather huge quantity of dissolved solute.
Learn more about concentration here:-https://brainly.com/question/26255204
#SPJ4
short note on sodium permutit
Explanation:
permutit is an artificial zeolite chemically it is
hydrated sodium aluminum orthosilicate with the formula
Na2AI2Si208. XH20
Larisa pumps up a soccer ball until it has a gauge pressure of 61 kilopascals. The volume of the ball is 5.2 liters. The air temperature is 32°C, and the outside air is at standard pressure. How many moles of air are in the ball?
A. 0.13 mol
B. 0.33 mol
C. 1.2 mol
D. 3.2 mol
The number of mole of air in the ball, given that the volume of the ball is 5.2 litres is 0.13 mole (Option A)
How to determine the number of mole of airWe'll begin by listing out the given parameters from the question. This is given below:
Pressure (P) = 61 kilopascalsVolume (V) = 5.2 litresTemperature (T) = 32 °C = 32 + 273 = 305 KGas constant (R) = 8.314 L.KPa/Kmol Number of mole (n) =?From the above parameters, we can obtain the number of mole as follow
PV = nRT
61 × 5.2 = n × 8.314 × 305
317.2 = n × 2535.77
Divide both sides by 2535.77
n = 317.2 / 2535.77
n = 0.13 mole
Thus, the number of mole is 0.13 mole (Option A)
Learn more about number of mole:
https://brainly.com/question/16259909
#SPJ1
what would it mean if a reagent had turned color directly upon addition to the sample prior to addition of hydrogen peroxide?
Before the reaction of hydrogen peroxide, if a reagent had changed color immediately after being added to the sample, this would indicate the presence of a contaminant and the test would be invalid.
The above experiment is also knowns as a presumptive blood testing experiment in which if a contaminant is present, the test should be deemed invalid if a vivid blue or purple color appears after adding the TMB reagent but before adding the hydrogen peroxide; this is also frequently referred to as a "false positive" result.
Presumptive tests catalyze the oxidation of a chromogenic substance, which results in a color change, by reacting with the hemoglobin of all blood in humans and animals. If the test is positive, the material will be identified as potentially blood, though not necessarily human blood.
Learn more about presumptive blood testing experiments at
https://brainly.com/question/6601541?referrer=searchResults
#SPJ4
How is a covalent structure formed
ammonia burns in the presence of a copper catalyst to form nitrogen gas. what is the enthalpy change to burn g of ammonia?
The given question is incomplete and the complete question is
Ammonia burns in the presence of a copper catalyst to form nitrogen gas. 4 NH3(g) + 3 O2(g) → 2 N2(g) + 6 H2O(g) ΔΗ = -1267 kJ What is the enthalpy change to burn 38.4 g of ammonia?
Ammonia burns in the presence of a copper catalyst to form nitrogen gas. 4 NH3(g) + 3 O2(g) → 2 N2(g) + 6 H2O(g) ΔΗ = -1267 kJ and the enthalpy change to burn 38.4 g of ammonia is
Ammonia means NH₃ is one of the most commonly produced industrial chemical
Here given data is
ΔΗ = -1267 kJ
And the balanced reaction is
4 NH₃(g) + 3O₂(g) → 2N₂(g) + 6H₂O(g)
We have to calculate enthalpy change to burn g of ammonia = ?
First calculate the moles corresponding to 38.4 g NH₃
The molar mass of NH₃ is 17.03 g/mol
38.4 g ×1mole/17.03 g/mol = 2.25 mol
Then calculate the enthalpy change to burn 2.25 mol of ammonia
And according to the thermochemical equation 1267 kJ are released per 4 mole of ammonia that react
2.25 mol×(-1267kJ/4 mol) = -713 kJ
Enthalpy change to burn 38.4 g of ammonia is -713 kJ
Know more about enthalpy change
https://brainly.com/question/24021820
#SPJ4
what is the iupac name for the compound shown? a six carbon ring with an oxygen atom double bonded to one of the carbon atoms in the ring.
cyclohexanone is the compound which is shown.
what is cyclohexanone-
The chemical substance known as cyclohexanone has the formula (CH2)5CO. The compound is a six-carbon cyclic molecule with a functional group called a ketone.
IUPAC (International Union of Pure and Applied Chemistry) nomenclature is based on the naming of a molecule's longest chain of carbons connected by single bonds, whether in a continuous chain or in a ring.
six-carbon ring with oxygen bonded to one of the carbon atoms in the ring is cyclohexanone.
learn more about cyclohexanone here;
https://brainly.com/question/28163979
#SPJ4
when atoms react, they often lose, gain, or share electrons to form a more stable version of themselves. for example, alkali metals such as na lose their outer shell electron in their reactions to form compounds. the electron configuration of alkali metals would then resemble those of which group of the periodic table in the compounds they form?
Answer: The alkali metals will lose an electron to resemble the next lowest noble gas; thus, all the alkali metals form +1 ions. K loses an electron so that it will have the same electron configuration as Ne.
1A or group 1
Hope this helps! Have a good day!
The electron configuration of alkali metals would then resemble those of group 17 of the periodic table in the compounds they form.
What is periodic table?Periodic table is defined as a tabular approach of showing the items so that they appear in the same vertical column or group when their attributes are similar. Phosphorus is the oldest chemical element, and hassium is the newest. Please take note that, unlike in the Periodic system, the elements do not exhibit their natural relationships with one another.
The elements that make up group 17 of the periodic table are the halogens. They are nonmetals that are reactive, such as iodine, bromine, chlorine, and fluorine. Halogens are non-metals that are very reactive. These substances share a lot of characteristics with one another.
Thus, the electron configuration of alkali metals would then resemble those of group 17 of the periodic table in the compounds they form.
To learn more about periodic table, refer to the link below:
https://brainly.com/question/11155928
#SPJ2
the half-life of the reaction in trial 4 is less than the half-life in trial 1. explain why, in terms of activation energy.
Trial 4's half-life of the reaction is shorter than Trial 1's half-life. Because the activation energy and half life are both precisely related. In comparison to trail 4, trail 1 activation energy is higher.
A reaction's t1/2, or half-life, It occurs when the concentration of a reactant is halved from its starting concentration. T1/2 is used to represent it.
Activation energy is the required amount of energy to start the reaction. Kilojoules per mole (kJ/mol) is the unit used to measure the activation energy (Ea) of a reaction. Activation energy is the force that causes an object to begin acting in a certain way or to start a specific process.
Learn more about activation energy here
https://brainly.com/question/28384644
#SPJ4
work is entropy free, and sometimes the claim is made that work will not change the entropy of a fluid passing through an adiabatic steady-flow system with a single inlet and outlet. is this a valid claim?
Work is entropy free and it does transfer entropy but the claim is not valid, the entropy of a fluid passing through an adiabatic steady state system with a single outlet and inlet can change due to irreversibilities present in the system during the process.
What is entropy?
Entropy is a measure of the disorder of a system.Entropy also describes how much energy is not available to do work.The more disordered a system and the higher the entropy, the less of a system's energy is available to do work.Why doesn't entropy change when there is a work transfer?
We have two grades of energy i.e high-grade energy and low-grade energy. High-grade energy is directly utilized by us like potential energy and kinetic energy. On the other hand, low-grade energy can't be utilized by us directly, it is first converted into high-grade energy eg- heat.According to the second law of thermodynamics low-grade energy can't be completely converted into high-grade energy, there is always some loss associated with it. But high-grade energy can be completely converted into low-grade energy.To know more about entropy:
https://brainly.com/question/21578229
#SPJ4
the expected stoichiometry is 1:1. how does your result compare (calculate the % error between your mole ratio and the expected value)?
Stoichiometry is the representation of balanced chemical equation, that involves the amount or quantities of reactants and products involved in the reaction.
In a chemical equation, stoichiometry is the relation between two or more substances. Stoichiometry can be the definite proportions in which elements or compounds react with one another. The rules followed in calculating the stoichiometric relationships are based on the laws of conservation of mass and energy and the law of combining weights or volumes.
For example:
N2 (g) + 3H2(g) → 2NH3(g)
In the above reaction, Nitrogen (N2) and Hydrogen (H2) react to form Ammonia (NH3).
1 molecule + 3 molecules = 2 molecules
There is another concept known as the stoichiometric coefficient, this gives us the number of molecules that are participating in the reaction.
Learn more about stoichiometry at,
https://brainly.com/question/14935523
#SPJ4
you are given two samples of elements, and each sample has a mass of 10 grams. if the number of atoms in each of these samples is the same, what must be true of the two elements?
The must be true of the two elements is All of the above.
An element is a substance composed of only one type of atom that cannot be broken down into simpler substances by either physical or chemical processes. They are divided into metals, non-metals, and semi-metals. Helium is the element with atomic number 2 in the periodic table. Each helium atom has two protons in its nucleus.
The atomic weight of the element is 4.0026. Helium is known as a gas in its pure form because it does not combine easily. A compound is a unique substance formed by the chemical combination of two or more elements. Compounds are formed through chemical reactions. Elements of a compound are held together by chemical bonds.
Learn more about An element here:-https://brainly.com/question/18096867
#SPJ4
which french chemist noticed that uranium salts could fog photographic plates, even without being exposed to sunlight?
In March 1896 Antione Henri Becquerel (French chemist) discovered that the uranium mixture would introduce radiation even if it was not exposed to an exposed light.
UraniumHenri Becquerel made a chemical compound of the element Uranium (potassium uranyl sulfuric acid crystals) and produced a light glow around it. This compound is then placed on a dry photographic plate wrapped in thin black paper. It turns out that this light causes sensitivity to the dry plate photo
In 1896, Becquerel accidentally discovered radioactivity while observing the phosphorescence of uranium salts, a discovery by Wilhelm Rontgen. X-rays used a cathode-ray tube to produce X-rays. Becquerel wondered whether X-rays could not be produced by exposing ordinary sunlight to non-metallic substances. Coincidentally, Becquerel also discovered for the first time that this new type of radiation would be transmitted by any uranium chemistries. Since the radiation did not depend in any way on the chemical form of the uranium, Becquerel realized that the radioactivity was not of chemical origin, but had to be from the uranium atoms themselves.
Learn more about uranium here: https://brainly.com/question/22464890#SPJ4
Chromium (Cr) can combine with chlorine (Cl2) to form chromium chloride (CrCl3).
Which equation is a correct representation of this reaction?
Responses
2Cr + Cl2 → CrCl3
2 upper case C lower case r plus upper case C lower case l subscript 2 end subscript rightward arrow upper case C lower case r upper case C lower case l subscript 3 end subscript,
Cr + Cl2 → CrCl3
upper case C lower case r plus upper case C lower case l subscript 2 end subscript rightward arrow upper case C lower case r upper case C lower case l subscript 3 end subscript,
2Cr + 3Cl2 → 2CrCl3
2 upper case C lower case r plus 3 upper case C lower case l subscript 2 end subscript rightward arrow 2 upper case C lower case r upper case C lower case l subscript 3 end subscript,
2Cr + 3Cl2 → CrCl3
The combination of the chlorine and the chromium species is designated by the reaction [tex]2Cr + 3Cl_{2} ------- > 2CrCl_{3}[/tex]. Option B
What is the correct representation?We know that the term reaction has to do with the way in which two atoms are combined in a compound. Now, the reaction must be balanced. This implies that the number of atoms on the reactant side must be the same as the number of atoms on the products side.
We are talking about how to write the reaction between the chromium atom and the chlorine atom. We know that we have to find out which of the reaction is balanced and that is; [tex]2Cr + 3Cl_{2} ------- > 2CrCl_{3}[/tex]
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
