what wrinkle resistance angle would you predict for a fabric specimen having an absorbance of 0.360? (round your answer to two decimal places.)

The option that is least affected by chemical weathering is: A pile of tiles made of feldspar.

The term "weathering" refers to the process by which rocks are disintegrated into smaller fragments by a variety of actions and mechanisms. Contrarily, chemical weathering refers to the degradation of rocks by chemical interactions between the constituents.

Clay minerals, such as quartz and feldspar, are least impacted by chemical weathering due to the lack of chemical interactions, making them the best choice in this circumstance.

In conclusion, the correct option is: a pile of tiles made of feldspar.

To know more about chemical weathering refer to:

https://brainly.com/question/1657289

#SPJ1

Iron is made up of atoms, the thermal expansion of solid iron is caused by C. the breaking of bonds between the iron atoms.

Thermal expansion  can be described as the tendency of matter to change in shape, volume, and area in response to a change in temperature.

It should be noted that the temperature  can be seen as a monotonic function of the average molecular kinetic energy of a substance , however When a substance is heated, the Kinetic energy that is present in the molecules will increases then they can start to vibrating more and usually maintain a greater average separation and this process will result to expoansion because bond will be broken.

Therefore, option C is correct.

Learn more about  atoms at

https://brainly.com/question/6258301

#SPJ1

When a 0.5 kilogramme hockey puck hurtles at the goaltender, its acceleration in the glove is 800 m/s2. F=ma a=F/m a=400/0.5 a=800 m/s2.

Acceleration refers to any process where velocity varies. There are only two ways to accelerate: either by speeding up your acceleration or by reversing your acceleration. Because velocity consists of both a speed and a direction, this is the case. You cannot possibly be accelerating if you don't also alter your direction and speed, regardless of how swiftly you are travelling. As a result, a jet does not suffer acceleration even while moving at a high speed—in this example, 800 miles per hour—because its velocity is constant.

To know more about  acceleration visit : brainly.com/question/3046924

#SPJ4

Think of a rod. The net force exerted on the rod would be zero if one force were acting in the downward at one end and an equal force were acting in the up direction at the other end.

Science has a precise definition for the word "force." At this point, describing a force as a push or even a pull is perfectly acceptable. A force is not something that an object "has in it" or "contains." A force from that other object can affect something else. No inanimate item or living thing is excluded from the definition of a force.

Force is the term for an external source that causes a body to tend to modify or change its state. When force is applied to the body, it can also alter shape, size, and direction. For instance, kicking a ball, opening and closing doors, or kneading dough

To know more about force  visit:

https://brainly.com/question/13191643

#SPJ4

If there is going to be a total lunar eclipse tonight, then you know that the Moon's phase is full.

The full moon phase is when lunar eclipses take place. When the Moon and Sun are exactly lined up, Earth's shadow falls on the Moon's surface, darkening it and occasionally turning it a brilliant red over the course of a few hours. Every lunar eclipse can be seen from half of the planet.

Total lunar eclipses occur when the moon is entirely submerged in the umbra of the earth's shadow. Hence, total lunar eclipse occurs when the Moon's phase is full.

Learn more about lunar eclipse here:

https://brainly.com/question/28679608

#SPJ1

ac=rω² In terms of rad/s, angular velocity describes how quickly an item is rotating around a curve. This acceleration is also known as a radial acceleration since it acts along the radius of the curved path.

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's centre.

Centripetal accelerations are brought on by centripetal forces. The gravitational pull between them produces the centripetal force that drives the motion in the unique situation of the Earth's clockwise direction around the Sun and any satellite's rotational inertia around in any celestial body.

To know more about Centripetal acceleration visit:

https://brainly.com/question/14465119

#SPJ4

307.4 μW/m² average magnitude of the pointing vector 4.00 mi with an average power of 250 kw

Power is produced when a force causes a displacement. Power has no bearing on how long it takes for a force to cause a displacement. The process's pace might range from swiftly concluding to taking some time.

For example, it takes an abnormally long time for a rock climber to elevate her body a few meters over the cliff's edge. On the other hand, a trail hiker may swiftly raise her body a few meters if she selects the faster path up the mountain. Despite making the same amount of work, the hiker completes the task far quicker than the rock climber..

S-average=power/area

power=260 kw

area=4π(8045)²

S-average=260/4π(8045)²

S-average=307.4 μW/m²

Therefore, the average magnitude with average power of 260 W is 307.4 μW/m²

To know more about  power visit : brainly.com/question/11800127

#SPJ4

A 90 kg goaltender celebrate by jumping 110 cm into the air after defending the goal. 970.20 J was work done throughout the celebration.

The sum of the displacement as well as the components of the force applied of the object in the displacement direction is the work done by a force. The body moves with certain acceleration when we push a blocks with certain force, and work is completed.

m = mass of the body = 90 kg

g = gravitational force

h = height = 110cm

Formula -

work done = mgh

                   = 90 × 9.8 × 110

                   = 970.20 J

To learn more about work done visit:

https://brainly.com/question/12240919

#SPJ4

The 10 diopter lens to be held closer to a piece of paper when focusing a distant object and diopter is unit of power of accomodation.

Two roughly fitting curved surfaces ground together will eventually become spherical spheres don’t bring parallel rays to a point this is called spherical aberration nearly axial rays (paraxial rays).

Two types of lens Convex and concave. Convex lenses make real images, concave make virtual images,the power of a lens (in diopters) is 1 over its focal length.

Implication of the gaussian formula is that when combining two lenses, add their power, adding a closeup filter allows a smaller object distance, changing object and image distances changes magnification.

lenses perform a 3D perspective transform of object space an object’s apparent size is inversely proportional to its distance linear lens motions move the in-focus plane non-linearly, focusing a lens changes the image size (slightly).

To know more about lens here

https://brainly.com/question/2860417

#SPJ4

Metals are used for conductors for all of the above conductor applications.

option D is the correct answer.

Metals are excellent conductors of electricity and heat because their atoms form a matrix through which outside electrons can easily move.

Electrical conduction in metals must follow Ohm's Law, which states that the current flowing in an Ohmic conductor is directly proportional to the potential difference across the metal conductors or wires.

V = IR

where;

Metals are used for conductors for the following;

Learn more about metal conductors here: https://brainly.com/question/14667270

#SPJ1

Answer:

45 newtons

Explanation:

A person exerts a force of 45 N at an angle θ then the work done by the person on the crate will be 173.48 J.

Work is a physics term used to describe the transfer of energy that takes place when an object changes above a distance because of an external force, at least some of which is given in the vector of the dislocation. The element of the force acting all along the path multiplied by the length of the path can be used to calculate work if the force is constant.

Mathematically, this idea is expressed as W = fd, where W is the effort and f is the force multiplied by d, the distance. Work is completed whenever the force is applied at an angle of with regard to the displacement.

As per the given information in the question,

Force, F = 45 N

Weight, w = 100 N

Distance, d = 4 m

The Vertical component of force, f(y) = 12 N.

To determine the force's component parts in this situation, we need formulae.

The horizontal component, F(x) = F cos θ

The vertical component, F(y) = 12 N

As the force F is given as 45 N, then,

45 sin θ = 12

sin θ = 12/45

θ = 15.466

Now,

F(x) =  F cos θ

= 45 cos (15.466)

F(x) = 43.37 N

The work required to move the crate 4 meters is determined by this horizontal component:

W = F(x) × D

W = 43.37 × 4

W = 173.48 J.

To know more about Work:

https://brainly.com/question/28172139

#SPJ12

Interview refers to an official face-to-face meeting of monarchs or other important figures.

It can also be a conversation in person (or, by extension, over the telephone, internet etc.) between a journalist and someone whose opinion or statements he or she wishes to record for publication, broadcast etc.

One importance of interview, which research has successfully pinpointed, is the control of facial expressions such as smiling gestures, posture etc.

360 degree feedback is an evaluation system or process in which employees receive confidential, anonymous feedback from the people who work around them. This typically includes the employee's manager, peers, and direct reports.

The 360 degrees Performance Appraisal method was first used in the 1940s. The 360 method provides each employee the opportunity to receive performance feedback from his or her supervisor, peers, staff members, co-workers and customers in an anonymous fashion.

Learn more about interviewing at: https://brainly.com/question/15128068

#SPJ1

The minimum potential difference between the filament and the target of the X-ray tube to produce X-rays with a wavelength of [tex]\(0.160 \, \text{nm}\)[/tex] is approximately [tex]\(7750 \, \text{V}\)[/tex].

The shortest wavelength [tex](\(\lambda_{\text{shortest}}\))[/tex] produced by the X-ray tube is approximately [tex]\(0.365 \, \text{nm}\)[/tex].

To calculate the minimum potential difference [tex](\(V\))[/tex] between the filament and the target of an X-ray tube to produce X-rays with a specific wavelength, we can use the equation for the energy of a photon [tex](\(E\))[/tex]:

[tex]\[E = \frac{hc}{\lambda}\][/tex]

Where:

[tex]\(h\)[/tex] is the Planck's constant [tex](\(6.626 \times 10^{-34}\) J·s)[/tex],

[tex]\(c\)[/tex] is the speed of light in a vacuum [tex](\(2.998 \times 10^8\) m/s)[/tex], and

[tex]\(\lambda\)[/tex] is the wavelength of X-rays [tex](\(0.160\) nm)[/tex].

We also know that the energy of a photon is related to the potential difference [tex](\(V\))[/tex] by the equation:

[tex]\[E = eV\][/tex]

Where:

[tex]\(e\)[/tex] is the elementary charge [tex](\(1.602 \times 10^{-19}\) C)[/tex].

Now, we can equate these two expressions for energy and solve for [tex]\(V\)[/tex]:

[tex]\[\frac{hc}{\lambda} = eV\]\\\\\V = \frac{hc}{e\lambda}\][/tex]

Substitute the given values:

[tex]\[V = \frac{(6.626 \times 10^{-34} \, \text{J·s}) \times (2.998 \times 10^8 \, \text{m/s})}{(1.602 \times 10^{-19} \, \text{C}) \times (0.160 \times 10^{-9} \, \text{m})}\][/tex]

[tex]\[V = \frac{1.9876 \times 10^{-15} \, \text{J·m}}{2.5632 \times 10^{-28} \, \text{C}}\]\\\\\V \approx 7750 \, \text{V}\][/tex]

So, the minimum potential difference between the filament and the target of the X-ray tube to produce X-rays with a wavelength of [tex]\(0.160 \, \text{nm}\)[/tex] is approximately [tex]\(7750 \, \text{V}\)[/tex].

Now, to find the shortest wavelength [tex](\(\lambda_{\text{shortest}}\))[/tex] produced by the tube, we can rearrange the equation for [tex]\(V\) in terms of \(\lambda\)[/tex]:

[tex]\[\lambda = \frac{hc}{eV}\][/tex]

Substitute the minimum potential difference [tex](\(V = 7750 \, \text{V}\))[/tex] into the equation:

[tex]\[\lambda_{\text{shortest}} = \frac{(6.626 \times 10^{-34} \, \text{J·s}) \times (2.998 \times 10^8 \, \text{m/s})}{(1.602 \times 10^{-19} \, \text{C}) \times (7750 \, \text{V})}\]\\\\\\lambda_{\text{shortest}} = \frac{1.9876 \times 10^{-15} \, \text{J·m}}{1.2385 \times 10^{-15} \, \text{C}}\][/tex]

[tex]\rm \[\lambda_{\text{shortest}} \approx 0.365 \, \text{nm}\][/tex]

So, the shortest wavelength [tex](\(\lambda_{\text{shortest}}\))[/tex] produced by the X-ray tube is approximately [tex]\(0.365 \, \text{nm}\)[/tex].

Know more about wavelength:

https://brainly.com/question/7143261

#SPJ12

When a star's outer layers, which are similar to the sun's, expand, the star travels upward and becomes cooler and more bright than the sun.

What is a star ?

Most galaxies have stars distributed throughout them that are born within dust clouds. The Orion Nebula is a well-known illustration of a dust cloud of this type. Even though stars are not alive, we refer to their beginnings and endings as "birth and death." It's a useful, though fantastical, approach to explain the star's ultimately disastrous interaction with matter and energy.

The outer layers start to enlarge, chill, and lose some of their radiance. The name "Red Giant" now refers to the growing star. Convection moves the energy from the shell-burning zone to the star's outer layers. The brilliance of the star eventually rises by a factor of 1000 or so. On the HR diagram, the star will move up and to the right along the Red Giant Branch during this phase of growth.

To learn more about Red Giant click here:

https://brainly.com/question/11362498

#SPJ4

The amount of seconds elapse for the distant observer will be 16.66sec.

To understand more about neutron star -

https://brainly.com/question/28271936

#SPJ4

If the pilot wanted to fly at the same flight mach number 2,200 ft above sea level then the corresponding flight velocity is 296.285 m/sec.

Velocity v is a vector, with units of meters per second. Velocity indicates the rate of change of the object’s position  i.e., velocity tells you how fast the object’s position is changing. The magnitude of the velocity indicates the object’s speed.

The direction of the velocity indicates the object’s direction of motion. The velocity at any point is always tangent to the object’s path at that point.

Thus, the velocity tells you how the object is moving. In particular, the velocity tells you which way and how fast the object is moving.

Given,

V = 484 Knote

V = 250.534 m/sec

Alitude = 43000+1 = Altitude =13.106 km

T= -54.59°C.

a)T= 218 48K.

then

C =[tex]\sqrt{KRT}[/tex]--------(1)

Substituting valves in (1)

C=[tex]\sqrt{K*284*218.43}[/tex]

C = 296.285 m/sec

then

M= V/c 250.534/296.285

M= 0.8455

b)V=140 knote

v = 72.02 m/s.

P = DRT

T = P/DR--------(2)

substituting all values in (2)

T = 101. 395 kpa/1.2 x 0.284

T = 101.395/ 0.3444

T = 294.207K

then,

c=343.82 m/s

m=v/c

m= 72.02/343.822

m= 0.2094

To know more about velocity here

https://brainly.com/question/16618732

#SPJ4

Short-term, precise, and moderately difficult goals are more likely to be achieved.

The current work connects goal setting to transformational leadership, whereas leading through goals is typically linked with a task-oriented leadership style. Employees participated in a two-time point online survey to learn more about how transformational leadership affects followers' commitment to the firm, work happiness, and proactive behavior. Results show that transformative leaders have an impact on how much followers value organisational goals and believe they are attainable. This objective attribute transmission of transformational leadership's impact on followers' work attitudes and proactive behaviour was discovered through many mediation analyses. Goal significance and goal attainability, however, appear to be of varying importance for the various outcomes.

To learn more about impact click here https://brainly.com/question/2140998

#SPJ4

Answer:

Yeah exactly.

Explanation:

Look here down.

From Newtond second law of motion.

And this force is included the force of weight which changes from ma to mg

The green line of gaseous mercury at 546 nm falls on a double-slit apparatus. If the fifth dark fringe is at 0.115 from the center line, 1.36 × 10⁻³ m is the slit separation.

It has been discovered that the double-slit experiment, which was conducted in the nineteenth century to study the characteristics of light, proves the duality of photons as well as the theories of superposition and quantum interference. There has been a long-running controversy about whether light is composed of particles or waves.

Given that,

The green line of gaseous mercury at 546 nm = 546 × 10⁻⁹ m

The fifth dark fringe is at 0.115 from the center line.

Thus, as we know,

d sin θ = mλ

d = mλ / sin θ

d = ( 5 × 546 × 10⁻⁹m) / sin 0.115

d = 1.36 × 10⁻³ m

So, 1.36 × 10⁻³ m is the slit separation.

To know more about double-slit experiment refer to:

https://brainly.com/question/29345312

#SPJ1

The answers include the following;

This is referred to as the degree of hotness or coldness of a substance and it is influenced by thermal energy.

The direction in which the heat flows is from hot chocolate to the vanilla ice cream and the kinetic energy of the hot chocolate decreases once you add the ice cream.

Read more about Temperature here https://brainly.com/question/25677592

#SPJ1

Yes, all electromagnetic waves have polarization as a characteristic. The primary difference in wave qualities involved in polarization of sound waves is amplitude.

Amplitude, The amplitude of the wave is the largest deviation of the wave from the mean position. It is the maximum height between the Center line and the Peak or Valley. There are waves in plane polarized light, and they all vibrate in the same direction. As the wave travels, the electric of a vector in circular polarization rotates about the direction of propagation. Reflection or travelling through filters, like particular crystals, can both cause light to become polarized.

Learn more about polarization here

https://brainly.com/question/29217577

#SPJ4

The normal boiling point of chloroform is 335.11 kelvin or 62.11 Celcius.

What is entropy?

Entropy can be thought of as a rough indicator of energy quality, with lower entropy indicating higher qualityLow entropy energy is structured for storage (the efficient library).. Energy is chaotically stored in the random-pile library, with high entropy.

standard enthalpy of vaporization of choroform= 31.4 kj/kmol

standard entropy of chloroform= 93.7j/mol-k

the relation between the entropy and enthalpy is defined by,

    Δ S = Δ /  

   where S= entropy of chloroform

              H= enthalpy of chloroform

               T=Boiling point of chloroform

on putting values in equation

            93.7=31.4*1000 /T

              T=335.11 kelvin

              T=335.11-273= 62.11 celcius

To know more about entropy visit:

https://brainly.com/question/13146879

#SPJ4

a. 1.43 s long does it take her to reach a speed of 2.00 m/s.

b. −1.79m/s² is her deceleration.

Calculation :

a. We are given the initial velocity, u=0 m/s, the acceleration, a=1.4 m/s² and the final velocity, v=2.00 m/s. Therefore, we shall calculate the time taken to reach such a final velocity by applying the following equation of kinematics,

v=u+at [1]

=at

∴t=v/a   [Dividing both sides by the acceleration]

=[tex]\frac{2.00 m/s}{1.4 m/s^{2} }[/tex]

=1.42857 s

≈1.43 s

It takes her 1.43 s to reach a speed of 2.00 m/s.

b. From above, the initial velocity is now, u1=1.43 m/s and the final velocity, v1=0 m/s. Thus, the deceleration, a, is calculated using the same equation [1] as follows,

v=u+at

0=u+at

∴a=−ut=[tex]\frac{-1.43 m/s}{ 0.800 s}[/tex]

= −1.7875 m/s²

≈−1.79 m/s²

Therefore, the deceleration of the car is

1.79 m/s²

In mechanics, acceleration is the rate of change of an object's velocity with respect to time. Acceleration is a vector quantity (as long as it has magnitude and direction). The direction of an object's acceleration is given by the direction of the net force acting on that object. As described in Newton's second law, the magnitude of an object's acceleration is the combined effect of two sources.

The mass of this object is inversely proportional to the mass of the object, depending on the material from which it is made.

The SI unit of acceleration is meters per square second

Learn more about acceleration here : https://brainly.com/question/460763

#SPJ4

The child's speed at the lowest point is 5.54 m/s and the force exerted by the seat on the child at the lowest point is 692 N.

A tension is a force along the length of a medium, especially a force carried by a flexible medium, such as a rope or cable. The word “tension” comes from a Latin word meaning “to stretch.” Not coincidentally, the flexible cords that carry muscle forces to other parts of the body are called tendons.

The Tension Force or the Force of Tension is the force transmitted through a rope, cable, string or wire pulled taut by forces acting on both ends.

The Tension Force, like all forces, is a vector and has both magnitude and direction. Direction,  Always a pull, In the direction of the rope, In opposite directions on opposite ends of the rope.

Any flexible connector, such as a string, rope, chain, wire, or cable, can exert pulls only parallel to its length, thus, a force carried by a flexible connector is a tension with direction parallel to the connector. It is important to understand that tension is a pull in a connector.

a)let the velocity at the lowest point be v

By balancing the force, we get

T + T = Mg + mv^2/l-------(1)

346+346 = 35*9.8 + 35*v^2/3.08

692=343 + 35v^2/3.08

v=5.54 m/s

b)let the force be F

At equillibrium, we get

F = Mg + mv^2/L

F = T+T            (from 1)

F = 2T

F = 692 N

To know more about tension here

https://brainly.com/question/3038170

#SPJ4

The change in the internal energy of the system is 3 *10^2 J

Work is done by system.

Hence work is negative.

Change in internal energy=500-200 = 300=3 *10^2 J

law of conservation Energy:

The law of conservation of energy states that energy is neither created nor destroyed, and can only be converted from one form of energy to another. This means that the same amount of energy is always available in the system unless supplied externally. This is especially confusing for non-conservative forces where the energy is converted from mechanical to thermal but the total energy remains the same. The only way to use energy is to convert it from one form to another.

The energy content of each system is determined by the formula:

UT=Ui+W+Q

where;

.UT is the total internal energy of the system.

.Ui is the initial internal energy of the system.

.W is work done by or on the system.

.Q is the heat added to or removed from the system. It is also possible to determine the change in internal energy of the system using the

equation: ΔU=W+Q

This is also a statement of the first law of thermodynamics.

Learn more about enregy here:

https://brainly.com/question/166559

#SPJ4

The pendulum will temporarily come to rest when it reaches its highest position for a very brief period of time. The pendulum's potential energy is at its highest point at this instant.

What form does the energy take when the mass moves past the equilibrium position in the system?

Elastic potential energy is transformed into kinetic energy as soon as the item begins to move; at equilibrium, only kinetic energy remains.

Which point has the most potential energy?

When the most energy is stored, potential energy is at its highest. When something rises to its greatest point in the air before dropping, when a rollercoaster is about to descend, or when a rubber band is stretched as far before it breaks, are examples of this. After then, potential energy is changed into kinetic energy.

To know more about potential energy visit;

https://brainly.com/question/24284560

#SPJ4

The direction of the force on the charge due to the magnetic field is 0(if angle is 180°) and qVB (angle is 90°)

Magnitude force on moving charge particles is F = qvBsinθ

Direction of particle is given by right hand thumb rule,

Right  hand point in direction of v, the finger in direction of B.

Force is directly perpendicular to the right hand palm.

Angle. between. V and B. is 180. degrees

F = qVB sin 180° = 0

Angle between V and B is 90 degrees

F = qVB sin90° = qVB

A magnetic field is a vector field that explains the magnetic influence on electrically charged objects in motion, electric currents, magnetic materials,[1]: [2]. A force perpendicular to the magnetic field and its own velocity acts on a moving charge in a magnetic field. [1]: ch13 [3]: 278 The magnetic field of a permanent magnet attracts or repels other magnets and pulls on ferromagnetic materials like iron. In addition, three more magnetic effects—paramagnetism, diamagnetism, and antiferromagnetism—exert minute forces on "nonmagnetic" materials in a nonuniform magnetic field, however these forces are often so minute that can only be measured by laboratory apparatus

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ4

Sphere Y will have a negative and Z have a positive sign. The sign of charge q2 will be negative.

When the spheres are separated and the balloon is removed, the two spheres show an electrical charge. The left sphere ends with a positive charge. The sphere on the right ends with a negative charge. When two conductive balls touch together.

It is as if they become one excellent conductor and the combined charge of the two spheres spreads over the surfaces of the contacting spheres. If you release the spheres again, each will still have half the original total charge. The charge is then spread evenly over the surface of the sphere.

Learn more about A uniform electric field here:- https://brainly.com/question/15331423

#SPJ4

A metal bar magnet has a magnetic field in the region of space around it. The magnetic field is due to an electric current that runs along the length of the magnet.

The lines of magnetic field from a bar magnet form closed lines. By convention, the field direction is taken to be outward from the North pole and in to the South pole of the magnet. Permanent magnets can be made from ferromagnetic materials.

This region is called the magnetic field. If an iron object is near a magnet, but is not within the magnetic field, the object will not be attracted to the magnet. When the object enters the magnetic field, the force of the magnet acts, and the object is attracted.

Inside a bar magnet, since magnetic field are continous, they point from the south pole to the north pole as the magnetic enters from south pole from the outside and emerge from the north pole.

Learn more about bar magnet  here:- https://brainly.com/question/16979849

#SPJ4

The focal length of the converging lens is 43 cm.

Solution:

LEM 2.

For lem 2,

4₂ = - (11+32) - 43 cm

v₂ = ∞

1/v₂ - 1/4₂ = 1/f₂

0 - 1/-43 = f₂

f₂ = +43cm

The distance from the lens to the focal point is called the focal length. A converging lens always has a positive focal length and a negative lens always has a negative focal length. However, these conventions are arbitrary, and physicists would be better off reversing the sign.

The focal length must be positive because according to the sign convention of the lens, the focal length is measured in the direction of the incident ray since rays converge toward the right side of the lens. A converging lens directs light to a point at the optical center or axis of the lens.

Learn more about The focal length here:- https://brainly.com/question/25779311

#SPJ4