True, it is customary to have a single column layout when defining a layout for a mobile device.
This is because mobile devices typically have smaller screens, and a single column layout allows for easier reading and navigation on a smaller screen. The single column layout is also known as a "stacked" layout, where elements are stacked on top of each other in a single column.
This design is also more responsive, meaning it can adapt to different screen sizes and orientations. In contrast, a multi-column layout may be more suitable for larger screens, such as desktops or laptops. However, for a mobile device, a single column layout is the preferred design.
Lear More About Mobile Device
https://brainly.com/question/23433108
#SPJ11
what is the minimum amount of available buffer space advertised at the received for the entire trace? does the lack of receiver buffer space ever throttle the sender? g
The minimum amount of available buffer space advertised at the receiver Information for the entire trace is zero. Yes, the lack of receiver buffer space can throttle the sender if the receiver does not have enough buffer space to handle the incoming traffic.
The minimum amount of available buffer space advertised at the receiver for the entire trace is zero. This means that at some point in the trace, the receiver buffer was completely filled, and no more data could be accepted. When the receiver buffer is full, the sender will be throttled and will need to reduce their transmission rate in order to allow the receiver to process the data in their buffer. This can cause a decrease in performance if the sender is sending data faster than the receiver can handle. In the case of buffer overflow, the sender will be forced to decrease the transmission rate until the receiver is able to keep up with the data stream. The lack of receiver buffer space can also cause packet loss if the sender is unable to reduce their transmission rate fast enough to prevent the buffer from overflowing.
Learn more about Information here:
brainly.com/question/12947584
#SPJ4
Please I need answers
electronic junk mail is considered a computer virus. (True or False)
FALSE, The claim is untrue since a virus is software, whereas electronic junk mail, or spam, is typically generated by marketing firms for commercial gain.
Regarded as electronic spam mail?Email spam, commonly referred to as junk email, is the practise of sending unwanted email to a large list of subscribers in mass.
What is unsolicited email?Bulk electronic mail transmitted over the internet to several recipients is known as spam email or junk email. These emails' primary objective is to promote themselves as much as possible. No human ever sends junk mail.
To know more about software visit:-
https://brainly.com/question/1022352
#SPJ4
The ____ interfaces is the portion of the application that allows you to control and interact with the program.
A user interface is the portion of the application that allows the user to control and to interact with the program.
How does a user interact with the application through the interface?In a device, the point of interaction and communication between humans and computers is the user interface (UI). Display screens, keyboards, a mouse, and the appearance of a desktop are all examples of this. It also refers to how a user interacts with a website or application.
What is the OS's user interface?The part of an operating system, program, or device that lets a user enter and receive information is known as the user interface (UI). A text-based user interface, as shown in the image to the left, displays text and typically requires keyboard input to execute its commands.
Learn more about user interface:
brainly.com/question/29541505
#SPJ4
The ENERGY STAR program encourages manufacturers to reduce the amount of electricity used by computers and related devices.T/F
True, The ENERGY STAR program encourages manufacturers to reduce the amount of electricity used by computers and related devices.
What is ENERGY STAR program?The Environmental Protection Agency (EPA) and the Department of Energy jointly run the ENERGY STAR® programme (DOE). Through the adoption of energy-efficient products and practises, it aims to assist consumers, businesses, and industry in making savings and safeguarding the environment. The ENERGY STAR label identifies high-performing, economical products, houses, and structures.
Since its inception, ENERGY STAR has produced impressive results: in 2010, Americans avoided greenhouse gas emissions equal to those from 33 million cars while saving close to $18 billion on utility costs.
Working arrangements to improve and expand the various facets of ENERGY STAR are established by a Memorandum of Understanding between the EPA and DOE on enhancing the energy efficiency of products and buildings. To expand and improve, EPA and DOE are working together.
Learn more about greenhouse gas emissions
https://brainly.com/question/26255495
#SPJ4
HTML documents can only end with the following extensions: .html .htm
That is correct. In general, HTML documents should be saved with the file extension ".html" or ".htm" to be recognized as HTML documents by web browsers.
What is HTML?HTML stands for HyperText Markup Language. It is a markup language used for creating web pages and other information that can be displayed in a web browser. HTML provides a structure for web pages by using a combination of tags, attributes, and text to define the layout, content, and functionality of a web page.
HTML allows you to add headings, paragraphs, images, videos, links, forms, and other elements to a web page. The language uses tags to specify how content should be displayed on a page. For example, the <h1> tag is used to create a heading, the <p> tag is used to create a paragraph, and the <img> tag is used to display an image.
Web browsers interpret the HTML code and render it into a web page that users can view and interact with. HTML is often used in combination with other web technologies such as Cascading Style Sheets (CSS) and JavaScript to create dynamic and interactive web pages.
To know more about HTML ,visit:
https://brainly.com/question/30688099
#SPJ1
how do you create a numeric vector named ""scores""
To create a numeric vector named "scores", you can use the c() function in R. The c() function allows you to combine values into a vector.
You can specify the values you want to include in the vector within the parentheses of the c() function. For example:
scores <- c(90, 85, 92, 88, 95)
This will create a numeric vector named "scores" with the values 90, 85, 92, 88, and 95. You can also use the seq() function to create a numeric vector with a sequence of numbers. For example:
scores <- seq(90, 100, 2)
This will create a numeric vector named "scores" with the values 90, 92, 94, 96, 98, and 100.
Learn more about a numeric vector here:https://brainly.com/question/14584599
#SPJ11
1. Describe what the global codex is and what is the significance of having a code. Include the law that required employers to implement a code of conduct
A code of ethics is a set of guiding ideals meant to assist professionals in acting honorably and honestly at work.
A code of ethics statement may cover a variety of subjects, such as an organization's mission and core values, the standards of professionalism to which they are held, the best approach for professionals to manage difficulties, and other subjects. An "ethical code," also called a code of ethics, can address issues like business ethics, professional practice standards, and employee conduct policies. Often times, both businesses and trade associations ask their employees and members to follow by some sort of code of ethics. A transgression of the organization's code of ethics may result in termination or dismissal.
Learn more about code here-
https://brainly.com/question/17293834
#SPJ4
as the it administrator for a small corporate network, you periodically check the firewall configuration on the corpdata linux server to make sure everything is secure. in this lab, select view lab and type iptables -l at the prompt to answer the following question: which two tcp services have been allowed through the firewall?
The two TCP services allowed through the firewall are SSH (port 22) and SMTP (port 25).
What is firewall ?A firewall is a network security system that monitors and controls the incoming and outgoing network traffic based on predetermined security rules. Firewalls are typically configured to reject or block all incoming network connections, while allowing all outgoing connections. Firewalls can be implemented both in hardware and software, or a combination of both .A firewall is a security device used to control and manage inbound and outbound network traffic between an organization's internal network and the Internet or other external networks. The main purpose of a firewall is to block unauthorized access to or from a network while allowing authorized traffic. Firewalls can be implemented in many ways. B. As software running on a computer or dedicated hardware device. Typically, data packets are analyzed as they pass through a firewall and decisions are made whether to allow or block the packet based on preconfigured rules and policies.
To learn more about firewall visit
brainly.com/question/3221529
#SPJ1
You have a games console in your bedroom and a video streaming device in your lounge. You use both devices to watch movies. The Wireless Access Point is located in the lounge. You have found that you are able to stream movies at a far higher quality in the lounge than in your bedroom. Why is this?
Answer: Your ping reach time (ETA) is far faster or "lower" the closer you are to your wireless router. I hope this helps!
Explanation:
What do you use to separate arguments in a function?
In order to separate the arguments in a functions we apply the commas function .
How does it work?
A function is a set of instructions that, when called upon, carry out a particular task or set of tasks. It is a kind of routine or procedure that, given a certain input, produces a certain result.
A function can produce multiple outputs from a variety of inputs. Additionally, it is a standalone block of code that can be reused multiple times without having to be written over.
Functions are an essential component of programming and can be utilized to resolve difficult issues. They make it simpler for us to debug a large issue by allowing us to break it down into smaller, more manageable pieces.
Learn more about functions:
brainly.com/question/20476366
#SPJ4
the security rule requires that covered entities and business associates implement which type of safeguard to protect electronic data?
administrative, technical,
physical safeguards
Access control
The procedures and controls used to restrict or regulate access to electronic systems and data are referred to as access control.
What does a business partner do?Claim processing or administration, data analysis, processing or administration, usage review, quality assurance, billing, benefit management, practise management, and repricing are examples of business associate functions and activities.
What does a business associate look like?Lawyers, accountants, IT contractors, billing businesses, cloud storage providers, email encryption services, web hosts, etc. are a few examples of Business Associates. (This list might continue forever.) With these folks, you must have a business associate agreement.
To know more about electronic systems visit:-
https://brainly.com/question/28166552
#SPJ4
suppose a new standard, the iddd-643 standard, is developed for storing numbers in a string of 16 bits. the first bit is used for the sign of the number (0 if positive and 1 if negative). the next five bits store the exponent plus the bias, and the remaining 10 bits store the mantissa. the bias is 15 and no bits are reserved for any special purposes. what is the smallest exponent that can be stored?
Suppose a new standard, the iddd-643 standard, is developed for storing numbers in a string of 16 bits .The smallest exponent that can be stored is -15
Exponent: What is it?
The number of times a number must be multiplied by itself is the definition of the mathematical concept of the exponent. The character "" stands for it. For instance, if the number 5 has a 2 as its exponent, its representation is 5².
This indicates that 25 must be obtained by multiplying 5 twice by itself. Scientific notation also makes use of exponents to represent extremely large numbers. 4.5 x 10⁶ is, for instance, equivalent to 4,500,000. To make large numbers easier to understand and more concise, exponents are used. Additionally, they are used to represent powers and operations in algebra.
Learn more about exponents:
brainly.com/question/22283047
#SPJ4
If a and b are four-bit unsigned binary numbers 0111 and 1011, complete the table (on the following page) obtained when using a full adder (from figure 3. 15 in your textbook) to calculate each bit of the sum, s, of a and b. Check your answers by adding the decimal value of a and b and comparing the sum with s. Are the answers the same? why or why not?
The decimal values of a and b are 7 and 11, respectively. The sum of a and b is 18, which is equivalent to the binary value of 10010. The sum obtained by the full adder is 10010 as well.
The full adder circuit takes three binary inputs, which are two bits of numbers to be added and the carry-in value, and outputs a sum and a carry-out value.
The table below shows the result of adding 0111 and 1011 using a full adder.
a b c_in s c_out
0 1 0 1 0
1 1 1 1 1
1 0 1 0 1
0 1 1 0 1
The decimal values of a and b are 7 and 11, respectively. The sum of a and b is 18, which is equivalent to the binary value of 10010. The sum obtained by the full adder is 10010 as well. Thus, the answers are the same. The full adder circuit is an essential building block in digital circuits, and it is used in many applications, such as arithmetic logic units, microprocessors, and digital signal processing. The full adder provides an efficient and reliable method to perform addition in binary arithmetic.
Learn more about microprocessors :
https://brainly.com/question/1305972
#SPJ4
dr. pendelton reviews a status report from his research partner. feedback travels to sender. sender encodes message. message travels over channel. receiver decodes message. sender has an idea.
Feedback enables the communication's sender to confirm that their message has been received and comprehended. The medium through which a message is transmitted is called a channel.
Is the channel the medium used to transmit a message?The method used to transmit a communication message is called the channel. The message needs to be delivered, thus the sender uses a channel known as a communication. A communication channel disruption prevents the recipient from correctly deciphering the message.
Is there a message being decoded?Decoding is the process through which the receiver converts an encoded message into a usable form.
To know more about Decoding visit:-
https://brainly.com/question/14587021
#SPJ1
By recording all transactions across business network among participants. What aspect of blockchain creates the system of record?
By recording all transactions across the business network among participants. The aspect of blockchain that creates the system of record is its distributed ledger technology.
What Is Blockchain?
Blockchain is a decentralized digital ledger technology that allows multiple parties to securely and transparently record, store and verify transactions without the need for intermediaries, such as banks or other third-party institutions. In a blockchain network, transactions are grouped into blocks and then added to a chain of previous blocks, forming an immutable and transparent record of all transactions on the network.
Each block in a blockchain contains a cryptographic hash of the previous block, which creates a secure and tamper-proof link between all the blocks. This makes it virtually impossible to alter or manipulate any transactions on the network without detection, as any changes to a block would affect all subsequent blocks in the chain, causing the hash values to become invalid.
A distributed ledger is a database that is spread across a network of computers, where each computer on the network has a copy of the entire ledger. This means that every transaction that occurs on the network is recorded on multiple copies of the ledger, making it difficult to alter or tamper with the records.
In a blockchain network, transactions are grouped into blocks and then added to the chain of previous blocks, forming a chronological and immutable record of all transactions on the network. This decentralized and transparent system of record provides a high level of security, privacy, and reliability, and eliminates the need for intermediaries or central authorities to validate transactions.
Therefore, the combination of the distributed ledger, consensus mechanism, and cryptographic hash functions used to link each block together creates a transparent, secure, and auditable system of record for all transactions on the network.
To learn more about Blockchain click here
https://brainly.com/question/30088493
#SPJ4
you want to focus and track malicious activity to a particular host in your screened subnet. what should you configure
To focus and track malicious activity to a particular host in your screened subnet, you should configure network monitoring tools such as intrusion detection and prevention systems (IDS/IPS).
These tools are designed to analyze network traffic, detect any suspicious activity, and alert the administrator in real-time.
To configure an IDS/IPS system, you would need to define rules that specify the type of traffic to monitor and the actions to take when a rule is triggered. For example, you could configure the system to monitor traffic to a specific IP address or range of addresses, and then trigger an alert when a particular type of traffic is detected, such as port scanning, brute force login attempts, or network-based attacks.
By configuring an IDS/IPS system to focus on a particular host in your screened subnet, you can quickly identify and respond to any malicious activity directed towards that host. This can help prevent the attacker from gaining access to your network, stealing data, or causing damage to your systems.
Learn more about IP address :
https://brainly.com/question/16011753
#SPJ4
which is the first step to delete a column in a worksheet? question 7 options: select the column to the left of the column you want to delete. change the width of the column to zero. select the column you want to delete. select the column to the right of the column you want to delete.
The first step to deleting a column in a worksheet is to select the column you want to delete.
So, the correct option from the given choices is "select the column you want to delete."
What is Worksheet?
A worksheet is typically organized into rows and columns, with each intersection of a row and column forming a cell. The cells are used to input and display data, such as numbers, text, formulas, and functions. The cells can be formatted to display the data in various ways, such as font type, font size, color, and alignment.
Worksheets are commonly used for a variety of tasks, such as financial analysis, budgeting, project management, data tracking, and data visualization. They can also be used for simple tasks such as creating a grocery list or address book.
Once you have selected the column, you can then proceed to delete it. In most spreadsheet software, you can do this by right-clicking on the column and selecting "Delete" from the context menu, or by going to the "Edit" menu and selecting "Delete" or "Delete Column." Depending on the software, you may also be able to use keyboard shortcuts to delete the selected column.
Therefore, "choose the column you want to delete" is the appropriate response from the options provided.
To learn more about the worksheet click here
https://brainly.com/question/28737718
#SPJ4
what sas statement used in a data step will make a copy of a dataset? (just give the statement name, no semi-colon or anything else.)
SET is the SAS statement used in a data step will make a copy of a dataset.
What is a SAS statement?A SAS statement is a collection of components that could include keywords, SAS names, special characters, and operators. A semicolon marks the conclusion of every SAS statement. A SAS statement either provides data to the system or asks SAS to carry out an operation.
A new SAS data set is started with the DATA statement. The guidelines for creating DATA sets are listed below.
After the DATA statement, a single word denotes the name of the temporary data set. So, at the end of the session, the data set is deleted.
A library name can be prefixed to the data set name to make it a permanent data set. This indicates that the data set is persistent after the session has ended.
Learn more about SAS statement
https://brainly.com/question/29353403
#SPJ4
How to fix the your device is missing important security and quality fixes?
If you encounter the notice "Your device is missing essential security and quality fixes" on your Windows device, it implies that Windows has determined that some updates.
or patches are missing from your system, which might be critical to its security or performance. Here are some methods you may take to resolve the problem: Keep an eye out for updates: Check the Windows Update settings for any available updates. Install all available updates, including optional ones. Run the Windows Update Troubleshooter: Windows has a troubleshooter that can assist in identifying and resolving difficulties with Windows updates. Search for "troubleshoot" in the Start menu, pick "Troubleshoot settings" and click on "Additional troubleshooters". Choose "Windows Update" to launch the troubleshooter.
learn more about security here:
https://brainly.com/question/28070333
#SPJ4
how to solve "unregistered authentication agent for unix-process"?
The error message "unregistered authentication agent for Unix-process" typically occurs when you are trying to use an authentication agent (such as ssh-agent) without properly registering it with your system.
What is Authentication?
Authentication is the process of verifying the identity of a user, system, or device attempting to access a particular resource or service. The goal of authentication is to confirm that the person or entity claiming to be a particular user or system is indeed who they say they are.
Authentication typically involves the use of credentials, such as a username and password, a security token, or a biometric factor, which the user or system must provide to gain access. The system then compares the provided credentials to a database of authorized users or systems to confirm that the credentials are valid and match an existing user or system.
Authentication is a critical aspect of security and is used to protect sensitive information and resources from unauthorized access. It is often used in conjunction with other security measures, such as authorization, encryption, and auditing, to ensure that only authorized users or systems can access protected resources.
The error message "unregistered authentication agent for Unix process" typically occurs when an SSH agent is not running or has not been registered with the user's session. Here are some steps you can take to solve this issue:
1. Check if an SSH agent is running: Open a terminal and type the command "eval ssh-agent -s". If an agent is already running, this command will output some environment variables. If not, it will start a new agent and output the environment variables that you need to set.
2. Set the environment variables: If the ssh-agent command outputted some environment variables, copy and paste the output into the terminal. If not, use the output from the command in step 1.
3. Add your SSH key: Use the ssh-add command to add your SSH key to the agent. For example, type "ssh-add ~/.ssh/id_rsa" to add the default private key.
Therefore, If the above steps do not solve the issue, try restarting your computer or checking your SSH configuration files to ensure that they are correct.
To learn more about Authentication click here
https://brainly.com/question/13615355
#SPJ4
The Percent Style button formats selected cells as a percentage with ________.A)one decimal placeB)two decimal placesC)three decimal placesD)zero decimal places
Answer:
(b) two decimal places
Explanation:
explain a real-life loop you encounter in your daily life which would best be represented using a while loop using pseudocode, write the looping structure of your example explain a real-life loop you encounter in your daily life which would best be represented using a for loop using pseudocode, write the looping structure of your example
To iterate through the objects in a collection, use an item-based for loop. Applying some operations to an item is helpful.
An index-based for loop is used to repeatedly run certain logic. While loop is also helpful to repeatedly carry out a logic. To iterate through the objects in a collection, use an item-based for loop. Applying some operations to an item is helpful. An index-based for loop is used to repeatedly run certain logic. While loop is also helpful to repeatedly carry out a logic. The sample below in c#.net demonstrates this. system use; empty main () names=new names[20] in a string; counter int = 0; /for loop with an index, for (int i=0;i++;i++;i++) for loop that is item-based. string s in names; foreach console.writeline(s); } whilst loop. while(counter<20) { console.read(names[counter]; console.read(names[i]);counter++; } }counter++; } }
Learn more about Item-based for loop here:
https://brainly.com/question/13099364
#SPJ4
10. which of the following are valid private ip addresses? (select all valid choices) a) 172.32.1.1 b) 10.255.255.255 c) 168.192.0.255 d) 192.168.0.1
Option b. 10.255.255.255c
An IP Address (Internet Protocol Address)
is a set of numaricals connected to a computer network and using the internet protocol for communication.
And a private network in internet networking, is a computer network which uses private IP Address.
These addresses can commonly be used in any local Area networks such as offices, or residential environments.
These private IP Address are not related to any specific organization, and anyone can use them with te approval of local and regional internet registries.
Learn more about IP Address here
https://brainly.com/question/14306158
#SPJ4
what signal modifier ensures that voip packets arrive in their proper order?
A signal modifier that ensures that VoIP packets arrive in their proper order is called a "Sequence Number."
This is a unique number assigned to each VoIP packet to keep them in the correct order as they travel through the network. By using sequence numbers, any out-of-order packets can be easily identified and reordered before being delivered to the recipient. This is an important function, as it ensures that the voice data is delivered in the correct order, which is essential for maintaining the quality of the VoIP call.
To mitigate the effects of delay and jitter, VoIP systems also use techniques like jitter buffers, as I mentioned in my previous response. So, while sequence numbers are an important part of the VoIP protocol, they are usually used in combination with other techniques to ensure reliable and high-quality voice communications over the internet.
Learn more about Sequence Number here:https://brainly.com/question/28173254
#SPJ11
g logplanetorbit starmetallicity logstarmass logstarage what is the second most significant predictor? logplane.
It is impossible to say whether "logplanet" is the second most significant predictor with the facts provided. Just the names of many variables—"g," "logplanetorbit," "starmetallicity," "logstarmass," and "logstarage"—are given in the statement.
Astronomers use the variable "logplanetorbit" to characterise a planet's orbital properties around a star. It is the logarithm of the planet's day-based orbital period, which represents how long it takes the planet to complete one cycle around the star. The distribution of orbital periods, which might range from a few days to several years, is simplified using the logarithmic transformation to make it easier to statistically analyse. In studies of exoplanets, or planets outside of our solar system, "logplanetorbit" is frequently used as a predictor variable to look at the links between the planet's orbital period and other variables like the planet's mass or the features of its host star.
Learn more about "logplanetorbit" here:
https://brainly.com/question/13816891
#SPJ4
move all of the sliders to 50 db. click play full sequence (20 sec). what do you notice about the perceived volumes of the tones?
Based on variables including the ambient noise level sequence in the environment and unique hearing traits, the subjective loudness level of 50 dB may be experienced differently.
Can humans hear below 20 Hz?The lowest pitch that the human ear can hear is 20 Hz, while the highest pitch is 20 kHz (highest pitch). Although some creatures, such as the mole-rat and elephant, are capable of hearing infrasounds, all sounds below 20 Hz are classified as infrasounds.
What are the tiniest noises you can hear?The threshold of hearing is the lowest sound that the human ear can detect at a frequency of 1000 Hz, which corresponds to an intensity of approximately 1.00 10-12 W/m2.
To know more about frequency visit:-
https://brainly.com/question/9632867
#SPJ4
- write a c program that: a. declares a variable and a pointer and assigns a value to the variable. b. assigns the address of the variable to the pointer. c. prints the address of the pointer and the value stored. d. changes the value of the variable. e. prints the address and the value of the pointer.
A c program that declares a variable and a pointer and assigns a value to the variable is mentioned below:
#include <stdio.h>
int main(void) {
int var = 10; // a. declares a variable and assigns a value to the variable
int *pointer = &var; // b. assigns the address of the variable to the pointer
printf("Address of pointer: %p \n", pointer); // c. prints the address of the pointer
printf("Value of pointer: %d \n", *pointer); // c. prints the value stored in the pointer
*pointer = 20; // d. changes the value of the variable
printf("Address of pointer: %p \n", pointer); // e. prints the address and the value of the pointer
printf("Value of pointer: %d \n", *pointer); // e. prints the address and the value of the pointer
return 0;
}
Explain the C program in detail.Low-level access to system memory is provided by the general-purpose and procedural C programming language. To become an executable that can be run on a computer, a C program must be run through a C compiler.
An example of C programming is provided.Because it can be used for low-level programming (such as driver and kernel programming), the C language is considered a system programming language. Most of the time, it's used to make OS, drivers, kernels, hardware devices, and other things. The Linux kernel, for instance, cannot be used for internet programming like Java,.Net, PHP, etc. because it is written in C.
Learn more about C program:
brainly.com/question/15683939
#SPJ4
what keyboard shortcut clears content for selected cells?
The Keyboard shortcut to clear content for selected cells is: Ctrl+Shift+Del.
What is Keyboard?
A keyboard is a device used to input data into a computer or other electronic device. It typically contains keys for each of the letters of the alphabet, numbers, punctuation marks, and other keys for special functions. The keys are arranged in a standard layout, making it easier for users to quickly and accurately type out words and phrases. Keyboards can also be used to control video games and other applications. With the advent of wireless technology, keyboards have become increasingly popular for use with laptops and tablets.
To know more about Keyboards
brainly.com/question/26632484
#SPJ4
give an example of a foreign key constraint that involves the emp relation. what are the options for enforcing this constraint when a user attempts to delete an emp tuple?
An example of a foreign key constraint is :
CREATE TABLE Works (eid INTEGER NOT NULL, did INTEGER NOT NULL, parttime INTEGER, PRIMARY KEY (eid, did), UNIQUE (eid).
A column (or group of columns) in a table that must have values that match those of a column in another table is known as a foreign key. Referential integrity, which essentially states that if column value A refers to column value B, then column value B must exist, is enforced via FOREIGN KEY constraints.
When a user tries to delete an emp tuple
It can also delete all the other work tuple that refers to it.
Can also stop the deletion of the tuple.
Learn more about Foreign key constraints here
https://brainly.com/question/30033137
#SPJ4
