when doing research, knowing the precise population mean and other population parameters is absolutely essential.

a)A newspaper journalist is researching people’s opinion on the removal of mandatory mask-wearing. The journalist took a random sample of 85 adults in a city and found that 64% of the sample is in favor of continuing mandatory mask-wearing. The journalist concludes that a majority of adults in the city supports mandatory mask-wearing and writes a news article on it.

The journalist’s conclusion may be misleading because the sample size is not large enough to be representative of the population. A sample size of 85 adults is not sufficient to be able to make valid conclusions about the entire adult population of the city. To obtain more accurate results, the journalist could increase the sample size to include more adults from different locations in the city and ensure that the sample is representative of the entire population.

b)A survey was conducted to analyze the impact of smoking on human health. The survey was conducted on 200 participants between the ages of 18 and 40. The participants were divided into two groups, smokers and non-smokers. The survey found that the average weight of smokers is higher than that of non-smokers.

The survey also found that the average age of non-smokers is higher than that of smokers.There could be a number of reasons why smokers have a higher average weight than non-smokers. For example, smokers may be more likely to have unhealthy eating habits or less likely to engage in regular exercise.

The fact that non-smokers have a higher average age could also be related to a range of factors, such as smoking cessation campaigns targeted at younger age groups or the effects of long-term smoking on life expectancy. However, the survey does not provide enough information to determine the causes of these trends. To obtain more information, further studies could be conducted that explore the relationship between smoking, weight, and age in more detail.

To know more about journalist visit:

https://brainly.com/question/10160256

#SPJ11

The P-value for the given test is 0.0885.

Given, the test statistic for this test turned out to have the value z = 1.35.

Now, we need to compute the P-value.

So, we can find the P-value as

P-value = P (Z > z)

where P is the probability of the standard normal distribution.

Using the standard normal distribution table, we can find that P(Z > 1.35) = 0.0885

Thus, the P-value for the given test is 0.0885.

Know more about P-value here:

https://brainly.com/question/13786078

#SPJ11

In this problem, we have i.i.d. random variables X1, X2, ..., Xn with a specific density function. We are interested in estimating the parameter a using the method of moments. The method of moments involves equating the sample moments with the theoretical moments to obtain an estimate for the parameter.

The maximum likelihood estimation (MLE) of a satisfies a certain equation. The asymptotic variance of the MLE can be determined, and a sufficient statistic for a can be found.

(i) To estimate the parameter a using the method of moments, we equate the sample moments with the theoretical moments. Since we know that E(X) = 1/2 and Var(X) = 1/4(2a + 1), we can set the sample mean and sample variance equal to their respective theoretical values and solve for a.

(ii) The maximum likelihood estimation (MLE) of a can be found by maximizing the likelihood function based on the observed data. In this case, the MLE of a satisfies an equation obtained by taking the derivative of the log-likelihood function with respect to a and setting it equal to zero.

(iii) The asymptotic variance of the MLE in (ii) can be determined using the Fisher information. The Fisher information quantifies the amount of information that the data provides about the parameter. In this case, it involves taking the second derivative of the log-likelihood function with respect to a and evaluating it at the MLE.

(iv) To find a sufficient statistic for a in (i), we need to determine a statistic that captures all the information in the data regarding the parameter a. In this case, a sufficient statistic can be found using the factorization theorem or by considering the joint density function of the random variables. The specific form of the sufficient statistic will depend on the given density function and the parameter a.

Overall, these steps provide a framework for estimating the parameter a, determining the MLE, calculating the asymptotic variance, and finding a sufficient statistic based on the given i.i.d. random variables and their density function.

To learn more about asymptotic variance visit:

brainly.com/question/31673927

#SPJ11

At the point (u, v) = (-1/3, -3), dw/du = 25 and dw/dv = 11 + 1/9.

We have,

w = xy + yz + xz

x = u + 2v

y = u - 2v

z = uv

First, put the expressions for x, y, and z into the equation for w:

w = (u + 2v)(u - 2v) + (u - 2v)(uv) + (u + 2v)(uv)

w = u² -4v² + u²v - 2uv² + uv² + 2uv²

w= 2u² + u²v - 2v² + 3uv²

Now, let's differentiate w with respect to u and v.

dw/du = d(2u² + u²v - 2v² + 3uv²)/du

      = 4u + 2uv + 3v^2

dw/dv = d(2u² + u²v - 2v² + 3uv²)/dv

      = -4v + u^2 - 4uv + 6uv

Now, we can evaluate dw/du and dw/dv at the point (u, v) = (-1/3, -3):

dw/du = 4(-1/3) + 2(-1/3)(-3) + 3(-3)²

     = -4/3 + 2/3 + 27

     = 25

and, dw/dv = -4(-3) + (-1/3)² - 4(-1/3)(-3) + 6(-1/3)(-3)

     = 12 + 1/9 + 4 - 6

     = 11 + 1/9

Therefore, at the point (u, v) = (-1/3, -3), dw/du = 25 and dw/dv = 11 + 1/9.

Learn more about Partial Differentiation here:

https://brainly.com/question/17008984

#SPJ4

the first term of arithmetic sequence is 4. We know that nth term of arithmetic sequence is given by Tn = a + (n-1) d, Where, Tn = nth term a = first term d = common difference.

Given :

Tenth term = 73 / 2 and Second term = 9 / 2

We know that nth term of arithmetic sequence is given by Tn = a + (n-1) d,

Where, Tn = nth term a = first term d = common difference

Let's find the common difference:73/2 = a + 9d  ... (i)9/2 = a + d  ... (ii)

By solving equation (i) and (ii) ,we can find the value of a

Let's subtract equation (ii) from equation (i)73/2 - 9/2 = 8da = 32/8 = 4

Hence, the first term of arithmetic sequence is 4.

To know more about arithmetic visit:

https://brainly.com/question/16415816

#SPJ11

The transformations to the graph of the quadratic function are given as follows:

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

Additionally, when the function is multiplied by |a| > 1, it is said that the function is vertically stretched by a factor of a.

More can be learned about translations at brainly.com/question/28174785

#SPJ1

Given that the function is f(x) = 13x^3 - 4x^2 + 12x - 5 and the domain is the set of all x such that 0 ≤ x ≤ 9, we need to determine the absolute maximum value of the function f occurs when x is: First, we need to find the critical points of the function f(x) in the domain [0, 9].

Critical points of the function are given as:f'(x) = 39x^2 - 8x + 12 = 0Solving the above equation, we get:x = (-(-8) ± √((-8)^2 - 4(39)(12))) / 2(39)x = (8 ± √400) / 78x = 1/3, 4/13

We check the value of f(0), f(1/3), f(4/13), f(9).f(0) = -5f(1/3) = 1.88889f(4/13) = 2.6022f(9) = 10588

Absolute maximum value of the function is the maximum value among f(0), f(1/3), f(4/13), and f(9).

Hence, the absolute maximum value of the function f occurs when x is 9. Therefore, option D is the correct answer.

Learn more about maximum value here.

https://brainly.com/question/22562190

#SPJ11

We found that the GCD of the following pairs of integers is:6 for 60 and 90.10 for 220 and 1400.21 for 3273∙11 and 23∙5∙7.

Greatest Common Divisor is also known as GCD. It is defined as the highest number that divides two or more integers completely. Let's solve the given pairs of integers:1. To find the GCD of 60 and 90, first, we have to factorize both numbers into their prime factors.60 = 2² × 3 × 590 = 2 × 3² × 5Now we will select the common factors and multiply them. Here, 2 and 3 are common factors.

GCD(60,90) = 2 × 3 = 6Therefore, the GCD of 60 and 90 is 6.2. To find the GCD of 220 and 1400, first, we have to factorize both numbers into their prime factors.220 = 2² × 5 × 111400 = 2³ × 5² × 7Now we will select the common factors and multiply them. Here, 2 and 5 are common factors.

GCD(220,1400) = 2 × 5 = 10Therefore, the GCD of 220 and 1400 is 10.3. To find the GCD of 3273∙11 and 23∙5∙7, first, we have to factorize both numbers into their prime factors.3273∙11 = 3 × 7 × 13 × 1123∙5∙7 = 3 × 5 × 7 × 23Now we will select the common factors and multiply them.

Here, 3 and 7 are common factors. GCD(3273∙11, 23∙5∙7) = 3 × 7 = 21Therefore, the GCD of 3273∙11 and 23∙5∙7 is 21. Therefore, we found that the GCD of the following pairs of integers is:6 for 60 and 90.10 for 220 and 1400.21 for 3273∙11 and 23∙5∙7.

To know more about Integers  visit :

https://brainly.com/question/490943

#SPJ11

Probability for selecting household is going to be only 46%.

To find the probability of randomly selecting a household that has one or two televisions, we need to sum the probabilities of the households with one television and two televisions.

In this case, we would sum the probabilities for P(x=1) and P(x=2).

The probability distribution provided gives us the probabilities for each number of televisions per household. Let's calculate the probability:

P(x=1) = 0.15

P(x=2) = 0.31

To find the probability of randomly selecting a household with one or two televisions, we add the probabilities together:

P(x=1 or x=2) = P(x=1) + P(x=2) = 0.15 + 0.31 = 0.46

Therefore, the probability of randomly selecting a household that has one or two televisions is 0.46 or 46%.

This means that if we were to randomly select a household from the small town, there is a 46% chance that the household will have either one or two televisions.

It is important to note that the given probability distribution should sum up to 1, which ensures that all possible outcomes are accounted for. In this case, the sum of all the probabilities is indeed 1, as 0.01 + 0.15 + 0.31 + 0.53 = 1.

By understanding the probability distribution, we can gain insights into the prevalence of different numbers of televisions in households in the small town.

To know more about probability refer here:

https://brainly.com/question/31828911?#

#SPJ11

To find the coordinates of the center and the length of the radius of a circle given its equation, we need to rewrite the equation in the standard form (x - h)^2 + (y - k)^2 = r^2.

Where (h, k) represents the center of the circle and r represents the radius.

In the given equation x^2 + y^2 - 2x + 6y + 3 = 0, we can complete the square for both the x and y terms. Let's start with the x terms:

x^2 - 2x + y^2 + 6y + 3 = 0

(x^2 - 2x + 1) + (y^2 + 6y + 9) = 1 + 9

(x - 1)^2 + (y + 3)^2 = 10

Comparing this with the standard form, we can see that the center of the circle is at (1, -3) and the radius is √10.

Therefore, the coordinates of the center of the circle are (1, -3), and the length of the radius is √10.

To know more about coordinates click here: brainly.com/question/22261383

#SPJ11

The Herfindahl-Hirschman Index (HHI) for this industry is 2,025. The closest option provided is 2,050.

To calculate the Herfindahl-Hirschman Index (HHI), we square the market shares of each firm and sum them up.

For the given industry with market shares of 25%, 20%, 20%, 20%, and 15%, respectively, the calculation is as follows:

[tex](0.25)^2 + (0.20)^2 + (0.20)^2 + (0.20)^2 + (0.15)^2 = 0.0625 + 0.04 + 0.04 + 0.04 + 0.0225 = 0.2025[/tex]

Multiplying by 10000 to express the result as an index, we have:

HHI = 0.2025 * 10000 = 2025

To know more about Herfindahl-Hirschman Index,

https://brainly.com/question/17184454

#SPJ11

The $$P(X>2)=1-F_x(2)=1-1=0$$Thus, $P(X>2)=0$.

Given that c.d.f of a random variable is $F_x(x)$, then if $x<0$,$$F_x(x)=1$$and if $x\geq 0$, then$$F_x(x)=\frac{x}{2}$$To compute $P(X>2)$, we have$$P(X>2) = 1 - P(X\leq 2)$$$$P(X\leq 2) = F_x(2)$$. Since $2>0$, we have$$F_x(2) = \frac{2}{2}=1$$

The natural and social sciences frequently utilise normal distributions to describe real-valued random variables whose distributions are unknown, which is why normal distributions are essential in statistics. The central limit theorem contributes to some of their significance. According to this statement, under some circumstances, the average of numerous samples (observations) of a random variable with finite mean and variance is itself a random variable, whose distribution converges to a normal distribution as the number of samples rises. As a result, the distributions of physical quantities, such as measurement errors, that are predicted to be the sum of numerous distinct processes frequently resemble normal distributions.

Know more about normal distribution here:

https://brainly.com/question/15103234

#SPJ11

Therefore, the length of the curve defined by r(t) = 6ti^2 + tjt^3 + tk, where 0 ≤ t ≤ 1, is approximately 3.618.

To find the length of the curve given by the vector-valued function r(t) = 6ti^2 + tjt^3 + tk, where 0 ≤ t ≤ 1, we can use the arc length formula for a curve in three dimensions.

The arc length formula is given by:

L = ∫ ||r'(t)|| dt

First, we need to find the derivative of r(t):

r'(t) = d/dt (6ti^2 + tjt^3 + tk)

= 12ti^2 + 3t^2j + k

Next, we need to find the magnitude of r'(t):

||r'(t)|| = ||12ti^2 + 3t^2j + k||

= √((12t)^2 + (3t^2)^2 + 1^2)

= √(144t^2 + 9t^4 + 1)

Now, we can calculate the length of the curve using the integral:

L = ∫₀¹ √(144t^2 + 9t^4 + 1) dt

This integral can be challenging to solve analytically, so we can use numerical methods or calculators to approximate the value.

The length of the curve, rounded to a reasonable decimal place, is approximately:

L ≈ 3.618

To know more about curve,

https://brainly.com/question/32065861

#SPJ11

To answer this question, we are required to find the first and third quartile for the given data set. The given data set is as follows:3 6 4 18 3 6 4 26 47 5 13 4 7 6 4 49 66.

To find the first and third quartiles, we need to organize the data set in ascending order, which gives:3 3 4 4 4 5 6 6 7 13 18 26 47 49 66. Here, the number of data values is 15. So, we can find the quartiles using the following formula:[tex]Q1 = (n + 1)/4th termQ3 = 3(n + 1)/4th term[/tex]. Let's calculate the first and third quartiles now.

First quartile, Q1 Using the formula, we have[tex]Q1 = (15 + 1)/4th termQ1 = 4th term[/tex]Now, the fourth term in the ordered data set is 4. Hence,Q1 = 4

Third quartile, Q3 Using the formula, we have[tex]Q3 = 3(15 + 1)/4th termQ3 = 12th term[/tex] Now, the twelfth term in the ordered data set is 49. Hence,Q3 = 49Therefore, the first and third quartiles for the given data set are 4 and 49 respectively.

to know more about interquartile range , visit:

https://brainly.com/question/24329548

#SPJ11

The AOQ for batches with 40% defectives is 0.24.

Given data:

Acceptance Sampling Plan: n-5 and c-2Percent Defective: 40%

The formula to find AOQ: AOQ = P (1 - C/n)

Here, P = 40% = 0.40c = 2n = 5

So, the average outgoing quality (AOQ) for batches with 40% defectives using an acceptance sampling plan of n-5 and c-2 can be calculated using the given formula:

AOQ = P (1 - C/n)

= 0.40 (1 - 2/5)

= 0.40 (3/5)

AOQ = 0.24

Therefore, the AOQ for batches with 40% defectives is 0.24.

To know more about Acceptance Sampling Plan visit:

brainly.com/question/31219279

#SPJ11

The standard form of the given equation is 4(x + 3)² + 9(y – 2)² = 72.

In order to convert the given equation into standard form, we need to complete the square for x and y.

We will first group the terms containing x and y and move the constant term to the right-hand side.

4x² + 24x + 9y² – 36y = - 36We will now add and subtract the square of half of the coefficient of x to complete the square for x.4(x² + 6x + 9) + 9y² – 36y – 36 = 0 + 4 × 9.4(x + 3)² + 9y² – 36y – 0 = 0 + 36

We will now add and subtract the square of half of the coefficient of y to complete the square for

y.4(x + 3)² + 9(y² – 4y + 4) = 36 + 4 × 9.4(x + 3)² + 9(y – 2)² = 72.

The standard form of the given equation is 4(x + 3)² + 9(y – 2)² = 72.

Know more about the equation here:

https://brainly.com/question/17145398

#SPJ11

To find the value of c1,2, we need to calculate the dot product of the first row of matrix A with the second column of matrix B.

The first row of matrix A is [3, -1, 2], and the second column of matrix B is [-2, 1, 3].

Taking the dot product of these vectors, we have:

c1,2 = (3 * -2) + (-1 * 1) + (2 * 3)

     = -6 - 1 + 6

     = -1

Therefore, the value of c1,2 is -1.

None of the given options (a, b, c, d, e) match the calculated value, so the correct answer is f) None of the above.

To know more about vectors visit-

brainly.com/question/30144731

#SPJ11

The associated radius of convergence R is 0.

Answer: [tex]ln(4) + (1/4)(x-4) - (1/32)(x-4)^2 + (1/64)(x-4)^3 - (3/256)(x-4)^4 and R = 0.[/tex]

We need to find the Taylor series for f(x) centered at the given value of a.

To find the Taylor series for ln(x) function we use the formula of the Taylor series which is:

[tex]f(x) = f(a) + f'(a)(x-a)/1! + f''(a)(x-a)^2/2! + ....+ f^n(a)(x-a)^n/n!......eqn.1[/tex]

Differentiating the given function ln(x), we get;

[tex]f'(x) = 1/x ......eqn.2\\f''(x) = -1/x^2 .......eqn.3\\f'''(x) = 2!/x^3 .....eqn.4\\f^4(x) = -3! /x^4 ....eqn.5[/tex]

Therefore, substituting the values of a, f(a), f'(a), f''(a), f'''(a) and f^4(a) in eqn.1, we get;

[tex]ln(x) = ln(4) + (1/4)(x-4) - (1/32)(x-4)^2 + (1/64)(x-4)^3 - (3/256)(x-4)^4 ......eqn.6[/tex]

The associated radius of convergence R is given by the formula;

[tex]R = lim |a_n / a_n+1 |[/tex]

where a_n is the nth term of the series.

In this case, the nth term is (x-4)^n/n!

Therefore, [tex]a_n+1 = (x-4)^(n+1) / (n+1)! and a_n = (x-4)^n/n!.[/tex]

Substituting these values in the formula, we get;

[tex]R = lim|(x-4)^n/n! x (n+1)!/(x-4)^(n+1) |[/tex]

on simplifying, we get;

[tex]R = lim |(x-4)/(n+1)|[/tex]

as n approaches, infinity, the denominator in the above equation becomes very large, and thus R approaches 0.

Hence the associated radius of convergence R is 0. Answer: [tex]ln(4) + (1/4)(x-4) - (1/32)(x-4)^2 + (1/64)(x-4)^3 - (3/256)(x-4)^4[/tex] and R = 0.

Know more about radius here:

https://brainly.com/question/24375372

#SPJ11

A p-value of less than 0.05 is considered statistically significant. The results of the regression analysis will allow us to determine whether the inflation rate and lending rate have a significant impact on the exchange rate.

Step 1: Collect Data We will obtain data on the inflation rate, lending rate, and exchange rate from a reliable source, such as the World Bank.

For this example, we will use monthly data.

Step 2: Organize DataAfter obtaining the data, we need to organize it into a spreadsheet.

The inflation rate, lending rate, and exchange rate data should be placed in separate columns.

Step 3: Run Regression AnalysisTo run a regression analysis, we will need to use the Excel Data Analysis Tool. Here are the steps to follow:

a) Click on the "Data" tab in Excel.

b) Select "Data Analysis" from the Analysis group.

c) Choose "Regression" from the list of options and click "OK."d) Enter the Input Y Range (dependent variable) and Input X Range (independent variables) in the appropriate boxes.

e) Check the box for "Labels" if the first row of data contains labels.

f) Check the box for "Output Range" and enter the location where you want the results to be displayed.

g) Click "OK" to run the regression analysis.

Step 4: Interpret ResultsThe regression output will provide information about the relationship between the inflation rate, lending rate, and exchange rate.

The "Coefficient" column will show the estimated coefficients for each independent variable.

A positive coefficient means that the variable has a positive effect on the dependent variable, while a negative coefficient means that the variable has a negative effect.

The "p-value" column will indicate whether the coefficient is statistically significant. A p-value of less than 0.05 is considered statistically significant.

The results of the regression analysis will allow us to determine whether the inflation rate and lending rate have a significant impact on the exchange rate.

Know more about inflation rate here:

https://brainly.com/question/777738

#SPJ11

The probability that X is greater than 145.28 is approximately 0.0465.

Given that X is normally distributed with mean (μ) of 110 and standard deviation (σ) of 21. We are to find the probability that X is greater than 145.28. It can be calculated as follows: We can calculate the Z-score value with the help of the following formula, Z = (X - μ) / σWhere X is the random variable value, μ is the mean, and σ is the standard deviation. Substituting the values in the formula, we get: Z = (145.28 - 110) / 21Z = 1.68476 Using the Z-table, we can find the probability that X is greater than 145.28 as follows: From the Z-table, we get: P(Z > 1.68) = 0.0465

Probability refers to potential. A random event's occurrence is the subject of this area of mathematics. The range of the value is 0 to 1. Mathematics has incorporated probability to forecast the likelihood of various events. The degree to which something is likely to happen is basically what probability means. You will understand the potential outcomes for a random experiment using this fundamental theory of probability, which is also applied to the probability distribution. Knowing the total number of outcomes is necessary before we can calculate the likelihood that a specific event will occur.

Know more about probability here:

https://brainly.com/question/31828911

#SPJ11

Answer:

2)a. A = π(5²) = 25π cm²

b. h = 17 cm

c. V = 25π(17) = 425π cm³

d. V = about 1,335.2 cm³

The given information is that the length of ZT is 4.8 units. We need to find the length of OT.

However, we don't have any information related to the figure or diagram. Therefore, we cannot provide an exact answer to this question. In addition to that, we need to know the type of measurement that the unit "units" represents. If it is a standard unit of measurement, we can provide an accurate answer to the question. The most common units of measurement are meters, centimeters, and millimeters.

Therefore, we need to know what unit the word "units" represents before providing an answer. Here is the formula to calculate the length of OT: ZT + OT = ZO Therefore, OT = ZO - ZT We need to know the length of ZO to find the length of OT.

Learn more about standard unit here.

https://brainly.com/question/13559915

#SPJ11

The correct option is a) defensive and indignant.Explanation:In the given paragraph, the author mentions that they are at times pulled to court by others who have learned about them, and adds that "instances are by no means uncommon."

This assertion clearly conveys a tone that is both defensive and indignant.The author appears to be attempting to justify their behavior by claiming that it is a common occurrence, and they are thus being unjustly singled out for criticism. They are defending themselves against perceived unfairness or hypocrisy.Choosing option a) is the best course of action.Explained:In the provided paragraph, the author indicates that they are occasionally persuaded to appear in court by people who have heard of them and adds that "instances are by no means rare.

To know more about  tone  , visit ;

https://brainly.com/question/819739

#SPJ11

The relationship between angle TAM and angle CAS is: vertical angles pair, and they are congruent to each other.

Here,

When two straight lines intersect each other at a point, they form four angles. The pair of angles that are directly opposite each other are referred to as vertical angles pair. These angles are congruent to each other. That is, they have the same angle measures.

The image attached below shows the intersection of two lines, line CT and line SM. They intersect at A to form four angles.

Two pairs of vertically opposite angles were formed. angle TAM and angle CAS is one of the vertical angles pair that was formed.

Therefore, the relationship between angle TAM and angle CAS is: vertical angles pair, and they are congruent to each other.

Learn more about the vertical angles pairs on:

brainly.com/question/1673457

#SPJ12

3x+50

6x-10

6x-10=3x+50

6x-3x=10+50

=3x. 60

(Divide both by 3)

x = 20

Answer:

X= 20 degrees

Step-by-step explanation:

a) The possible units for the unit of measurement can be seconds or minutes .b) The best procedure to find the average time of running is to measure the times of 40 volunteers who run a lap around the track. So, option B is the correct.

Tony is trying to find the average time it takes for the East High School students to run a lap around the track. For this, he needs to consider a sample of students to find the average time

.Option A: Asking for 40 volunteers to run a lap around the track and have them state their own timesThis is not a good procedure to find the average time as the times stated by the volunteers can be inaccurate or false, which may affect the results.

Option B: Measuring the times of 40 volunteers who run a lap around the trackThis is the best way to find the average time, as the times measured would be more accurate and precise. This procedure eliminates the chances of incorrect reporting by students.

Option C: Randomly picking 40 students to run a lap around the track and measuring their timesThis could be an effective way to collect data, but there are chances that the sample may not be representative of the whole population.

Option D: Randomly picking 40 students to run a lap around the track and having them state their own times.

Similar to option A, this method also depends on self-reporting, and thus, the results obtained may not be reliable. Therefore, option B is the best procedure to find the average time.

Know more about the unit of measurement

https://brainly.com/question/777464

#SPJ11

The function f(x) = 2x³ is not a probability density function on the given interval [1,2]. The value of the definite integral is 13/3. We know that a probability density function is a non-negative function and its integral over the entire range is equal to 1. So, we can check whether f(x) satisfies these conditions or not.

Step 1: Check if f(x) is non-negative on [1,2]f(x) = 2x³ is positive on [1,2]. So, it satisfies this condition.

Step 2: Check if the integral of f(x) over [1,2] is equal to 1∫[1,2] 2x³ dx = [x⁴]₂₁= 16/3 - 1 = 13/3 ≠ 1

Therefore, the function f(x) is not a probability density function on the given interval [1,2]. The value of the definite integral is 13/3.

To know more about probability density, refer

https://brainly.com/question/30403935

#SPJ11

Here is the solution to the problem, drag each label to the correct location.Molecular Shape of each Lewis Structure is given as follows: BENT:

It is the shape of molecules where there is a central atom, two lone pairs, and two bonds.TETRAHEDRAL: It is the shape of molecules where there is a central atom, four bonds, and no lone pairs. Examples of tetrahedral molecules include methane, carbon tetrachloride, and silicon.

TRIGONAL PLANAR: It is the shape of molecules where there is a central atom, three bonds, and no lone pairs. Examples of trigonal planar molecules include boron trifluoride, ozone, and formaldehyde. TRIGONAL PYRAMIDAL: It is the shape of molecules where there is a central atom, three bonds, and one lone pair. Examples of trigonal pyramidal molecules include ammonia and trimethylamine.

To know more about inequality visit:

https://brainly.com/question/29914203

#SPJ11

Given : 2.31/0.790 =?, (2.08 x 10³) x (3.11 x 10²) = 10⁵We know that division is the arithmetic operation used to separate the objects into equal groups. Also, the division is the inverse operation of multiplication.

Therefore,To solve the problem 2.31/0.790 = Step 1: First, write the given values. Step 2: Divide 2.31/0.790=2.924050633 Step 3: Finally, the value of the given problem is 2.924050633. Hence 2.31/0.790=2.924050633To solve the problem (2.08 x 10³) x (3.11 x 10²) = 10⁵Step 1: First, write the given values.

Step 2: Multiply 2.08 x 10³ and 3.11 x 10²=6.4608 x 10⁵Step 3: Finally, the value of the given problem is[tex]6.4608 x 10⁵. Hence (2.08 x 10³) x (3.11 x 10²) = 6.4608 x 10⁵Therefore, 2.31/0.790 = 2.924050633, (2.08 x 10³) x (3.11 x 10²) = 6.4608 x 10⁵.

To know more about inverse operation visit:

brainly.com/question/1210406

#SPJ11

The area of the given trapezoid is 40 square units.

1. The given values of a and b are sides of a right angled triangle.

Hence, the third side c can be found using the Pythagorean theorem.  

c^2 = a^2 + b^2  

c^2 = 2^2 + 6^2  

c^2 = 40  

c = sqrt(40)  

c = 2*sqrt(10)  

Now, the semi-perimeter of the triangle is s = (a+b+c)/2  s = (2+6+2*sqrt(10))/2  s = 4+sqrt(10)  

Using Heron's formula, the area of the triangle is

A = sqrt(s(s-a)(s-b)(s-c))  

A = sqrt((4+sqrt(10))(2+sqrt(10))(4-sqrt(10))(2-sqrt(10)))  

A = sqrt(4(4-10))(2+sqrt(10))(2-sqrt(10))  

A = sqrt(-24)(4)  

A = sqrt(96)  

A = 9.8  

Hence, the area of the given triangle is 9.8 square units.2.  

Area of trapezoid is given by the formula, A = (1/2)(sum of parallel sides)(distance between them)  

Here, the parallel sides are 6 and 10, and the distance between them is 5.  

A = (1/2)(6+10)(5)  

A = 16*2.5  

A = 40  

Hence, the area of the given trapezoid is 40 square units.

To know more about Pythagorean theorem visit:

https://brainly.com/question/14930619

#SPJ11