Which groups of the periodic table follow patterns in their valence electrons?.

The  net ionic equation of the reaction is; [tex]Fe^{2+} (aq) + S^{2-} (aq) ---- > FeS(s)[/tex]

When we talk about the  net ionic equation, we are talking about the equation that would show the ions that underwent a change in the reaction. These ions would differ from the spectator ions that did not undergo any change from left to write in the reaction.

In this case, we need to write to write the net reaction equation that would show the change that leads to the precipitation of the iron II sulfide as a solid from the solution.

Learn more about  net ionic equation:https://brainly.com/question/15466794

#SPJ1

Protonation of the carbonyl O atom, Nucleophilic attack by the alcohol, Deprotonation of the conjugate acid of the hemiacetal, Protonation and elimination of H2O, Second nucleophilic attack, Deprotonation of the conjugate acid of the acetal.

An acetal is a functional group in organic chemistry with connectivity R2C(OR')2. The R groups in this case can be either hydrogen or organic fragments (a carbon atom with any additional atoms connected to it), but the R' groups must be organic fragments. The two R' groups might or might not be equivalent to one another (a "symmetric acetal") (a "mixed acetal"). Acetals have the same oxidation state at the central carbon as similar carbonyl compounds and are generated from or convertible to aldehydes or ketones Nucleophilic attack. However, they exhibit significantly greater chemical stability and reactivity. Since the center carbon atom is bound by four bonds, it is saturated and has a tetrahedral geometry.

Learn more about Nucleophilic attack here:

https://brainly.com/question/14259828

#SPJ4

Small amounts of mass are changed into power from the breaking up fission or mixture fusion of the nuclei of atoms.

The potential or strength to do paintings, inclusive of the capacity to move an item  through the utility of force. power can exist in a selection of bureaucracy, along with electrical, mechanical, chemical, thermal, or nuclear, and can be transformed from one form to some other.

In physics, electricity is the quantitative asset this is transferred to a frame or to a physical gadget, recognizable in the performance of labor and inside the shape of warmth and mild. electricity is a conserved amount the law of conservation of strength states that strength may be transformed in form, however now not created or destroyed.

Scientists define strength as the potential to do work. contemporary civilization is possible because human beings have found a way to exchange energy from one shape to other and then use it to do paintings.

Learn more about energy here:-https://brainly.com/question/14427111

#SPJ4

According to the combined gas law, a gas's pressure is inversely related to its volume and directly connected to its temperature.

To Learn more about gas law refer to:

https://brainly.com/question/25290815

#SPJ4

The answer is 5 moles.

Molecules are made up of one or more atoms. If it contains more than one atom, the atoms can be the same or different. Biomolecules such as proteins and DNA are made up of thousands of atoms. A molecule is defined as two or more atoms of the same element bonded together.

A molecule is the smallest particle within a chemical element or compound that has the chemical properties of that element or compound. Molecules are made up of atoms joined by chemical bonds. There are two types of molecules. Element Numerator: Element Numerator is present. A group of two or more atoms that form the smallest identifiable unit that can divide a pure substance and that preserves the composition and chemical properties of that substance.

Learn more about Molecules here:-https://brainly.com/question/26044300

#SPJ4

Considering the Dalton's partial pressure, the mole fraction of CO₂ in the sample is 0.326.

The pressure exerted by a particular gas in a mixture is known as its partial pressure.

Dalton's partial pressure law can be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

In a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A}[/tex]=[tex]x_{A}[/tex][tex]P_{T}[/tex]

In this case, you know:

So, the mole fraction of CO₂ in the sample is calculated as:

[tex]P_{CO_{2} }[/tex]=[tex]x_{CO_{2}}[/tex][tex]P_{T}[/tex]

0.302 atm= [tex]x_{CO_{2}}[/tex]0.925 atm

0.302 atm÷ 0.925 atm=[tex]x_{CO_{2}}[/tex]

0.326= [tex]x_{CO_{2}}[/tex]

Finally, the mole fraction of CO₂ is 0.326.

Learn more about Dalton's partial pressure:

brainly.com/question/14239096

brainly.com/question/25181467

brainly.com/question/14119417

#SPJ1

Make suggestions for menu items free of the allergen. To make the order clear to the kitchen and service staff. To avoid cross-contact, deliver food in separate portions.

Handle any of the common allergens with caution, paying attention to what surfaces they have touched. To avoid coming into contact with other foods, wash your hands right away after handling allergen-containing foods and change gloves. Antihistamines. Since histamine causes many of the symptoms of an allergic reaction, antihistamines work by blocking its effects. You can buy a lot of antihistamines from your pharmacist without a prescription; stock up in case of emergency. It is best to use non-drowsy antihistamines. Food allergies have no known treatment, and the only way to prevent a reaction is to avoid the allergen. It helps to get rid of skin rashes, calms itching, and stops the skin from inflaming further.

Learn more about allergens here:

https://brainly.com/question/23801425

#SPJ4

Dalton says atoms of different factors differ in size and mass, while the cutting-edge theory says they range in common mass.

The subsequent postulates are proposed by John Dalton: All count number is manufactured from very tiny debris called atoms. Atoms are indivisible particles, which can't be created or destroyed in a chemical reaction. Atoms of a given detail are identical in mass and chemical houses.

The matter is made of indivisible debris referred to as atoms. The homes of all the atoms of a given detail are the same such as mass. this may additionally be said as all the atoms of detail have same mass at the same time as the atoms of various elements have exclusive loads.

This regulation explains that the sum of all partial pressures of gas in a combination should same as the barometric pressure. it is an especially essential calculation for oxygen to determine the pressure of gas pushing into the alveoli and consequently into the circulating blood.

Learn more about dalton atomic here:-https://brainly.com/question/13157325

#SPJ1

Potassium chloride is dissolved in an aqueous solution of silver nitrate. The final molarity of the chloride anion in the solution is 2.824 M.

Let's take 2.04 g of potassium chloride which is dissolved in 150 ml of a 0.20 M aqueous solution of silver nitrate.

The balanced equation of this problem is going to be -

KCL + AgNO₃ ⇒ KNO₃ + AgCL

Moles present in the KCL = 2.04 g

No. of moles =  [tex]\frac{Mass}{Molar Mass}[/tex]

= [tex]\frac{2.04}{74.5513}[/tex]

= 0.02736 moles

Moles of Silver Nitrate = molarity × Volume in L

= 0.20 × 0.150

= 0.030 moles of silver nitrate

Therefore, silver nitrate is the limiting agent.

Now, we will calculate the moles of the chloride anion -

= 0.030 moles × [tex]\frac{1 mole potassium chloride}{2 moles of silver nitrate }[/tex]

= 0.015 moles of potassium chloride

Remaining moles = 0.02736 moles - 0.015 moles

= 0.01236 moles of potassium chloride

Or we can say 0.04236 moles of the chloride anion.

Now, we calculate the molarity = [tex]\frac{No. of moles}{Volume in L}[/tex]

= [tex]\frac{0.04236}{0.0150}[/tex]

= 2.824 M

Learn to know more about Molarity on

https://brainly.com/question/8732513?referrer=searchResults

#SPJ4

Some of the citation examples are : (Ashbourne, 2014), (Nasta and Stein, 2020)

Citation is how you let your readers know that you just utilized data from exterior sources in your work. It too depicts those sources and gives data that permits the reader to track them down. This data may well be the author’s title, the distribution date, or page numbers. Citing sources that back up your claim, something else known as your thesis statement, makes validity for you as a researcher. Citing sources guarantees that your reader or instructor can differentiate your unique thoughts from the thoughts in your sources and of other analysts in your subject area. Citations regularly can be found in two places: after a paper in a book index or reference list and inside the text. The last mentioned, some of the time called “in-text” citations, more often than not comprise some points of interest around the source, and are for the most part composed in the bracket after the sentence where you referenced the source.

To  know more about citation refer to the link brainly.com/question/1272936

#SPJ4

Albumin in a single chain protein and it is family of globular proteins.

What is Albumin ?

The most common protein in blood plasma is albumin. In order to help in the movement of hormones, vitamins, and enzymes throughout the body, it helps in maintaining blood in arteries and veins. The liver produces albumin, which enters the bloodstream quickly.

With a molecular weight of 66/5 kDa with 585 amino acids, albumin is a single-chain protein. It is a simple protein lacking prosthetic groups and a non-glycosylated polypeptide.

The most common albumins are the serum albumins, which belong to a family of globular proteins. In addition to being moderately soluble in concentrated salt solutions and being heat denaturable, all albumin family proteins are water-soluble.

Thus, we can state that, albumin is a single chain protein.

To learn more about Albumin protein here :

https://brainly.com/question/18882874?referrer=searchResults

#SPJ4

The BaO has ionic bonds.

Ionic bonds generally occur between metallic and non-metallic elements. Therefore, the bonds formed are ionic, since there is a bond between metals and non-metals. Therefore, BaO has ionic bonds. Covalently bonded molecules composed of only one type of atom, such as hydrogen gas, are non-polar because the hydrogen atoms share their electrons equally.

Barium oxide is an ionic compound with a high dipole moment because it forms opposite dipoles. Bao is therefore a polar compound. Barium oxide also known as a barrier is a white hygroscopic non-flammable compound with the chemical formula BaO. It has a cubic structure and is used in cathode-ray tubes crown glasses and catalytic converters.

Learn more about Ionic bonds here:-https://brainly.com/question/13526463

#SPJ4

An archetype seems to be a pattern that unites people from different historical periods and cultural backgrounds. Swiss psychotherapist Carl Jung is credited with creating the archetype.

An archetype is a formal, reusable representation of a domain notion in the field of informatics. The word "archetype" has historically been used in psychology to refer to an idealized representation of a person, personality, or behavior.

We all have a "operational style" when it comes to relationships. It depends on how individuals approach love, whether we communicate with one another, and how we behave with other people. Our personalities, temperaments, emotional histories, and experiences combine to form our styles, or archetypes.

To know more about archetypal visit:

https://brainly.com/question/13428382

#SPJ4

Particles are spaced the farthest apart in gases and the closest together in solids.

Particles are furthest apart in gases. In gases, the particles are this point apart from each other and gases are fantastically clean to compress. Gases are fashioned from drinks thru evaporation or boiling. Debris in liquids is nearer than in gases but they're similar aside from in solids.

The states of depending wherein molecules are packed closest together is solids. Solids have an exact extent and form. even though the molecules are shifting on an atomic stage, there's no motion inside the macroscopic view of a strong. In general, solids are denser than liquids, which can be denser than gases. . The particles in the strong are touching with very little area among them.

Learn more about molecules here;  https://brainly.com/question/475709

#SPJ4

Sulfur is  is the central atom in  sulfur trioxide (SO3) molecule.

Sulfur (S), commonly known as sulfur and a nonmetallic chemical element in the oxygen group, is one of the most reactive elements (Group 16 [VIa] of the periodic table). Pure sulfur is an odorless, tasteless, brittle solid that is pale yellow in color, insoluble in water, and has a low electrical conductivity. Sulfides are produced when it interacts with a variety of nonmetallic elements as well as every metal, with the exception of gold and platinum. Millions of tons of sulfur are produced each year, mostly to make sulfuric acid, which is widely used in industry. Seawater contains 0.09 percent sulfate, which is a form of sulfur.

To know more about  Sulfur visit :https://brainly.com/question/23535995

#SPJ4

As 100 ml of 0.16 m naf and 100 ml of 0.16 m hf are combined, the resulting solution's pH rises when compared to the 0.10 m hf solution.

a metric for determining how basic or acidic a thing or solution is. The pH scale ranges from 0 to 14. A pH value of 7 is considered neutral on this scale, meaning it is neither acid nor basic. It's more acidic if the pH value is below 7, and more basic if the pH value is above 7.

The pH scale goes from 0 (very acidic) to 14 (neutral) (strongly basic or alkaline). The neutral range on this scale has a pH of 7.0. Blood typically has a pH range of 7.35 to 7.45, making it mildly basic.

To know more about ph visit :

https://brainly.com/question/15289741

#SPJ4

Because they are non-polar molecules, SF6 and PF5 compound(s) only show london dispersion intermolecular forces. The attractive and repulsive forces are referred to as intermolecular forces.

that develop in a substance's molecules. Individual molecules of a substance interact with one another through the mediation of these forces. Polarizability is the term used to describe a molecule's propensity to produce a charge separation or induced dipole.  intermolecular forces have a strength of the interaction between two dipoles, indicated as, can be used to express it.

The non-polar molecules are those that do not have charges at the end because their electrons are evenly distributed throughout and those that symmetrically cancel one another. Is called  non-polar molecules.

Learn more about  intermolecular forces here

https://brainly.com/question/9007693

#SPJ4

The complete question is-

Which Compound(S) Exhibit Only London Dispersion Intermolecular Forces? (Select All That Apply.) OF2 CH3OH SF6 CH3CH2NH2 PF5 BrF3

166.87 g of aluminum chloride are created when 34 g of aluminum and 39 g of chlorine gas are combined.

One mole of aluminum and three moles of chlorine combine to generate the ionic compound aluminum chloride.

Al + 3Cl → AlCl3

This reaction results in the formation of AlCl3 from one mole of Al and three moles of Cl. Here, Al serves as the limiting reactant. So the product's mass is solely dependent on Al.

Al has an atomic mass of 27 g/mol.

133.5 g/mol for AlCl3.

Al has a given mass of 34 g. Therefore, there are 1.25 moles instead of 34 moles because of the ratio of 27 to 34.

Thus, 1.25 moles of aluminum produce 1.25 moles of aluminum chloride from 1 mole of aluminum.

1.25 mole of AlCl3 weighs 1.25 mol and 133.5 g/mol =  166.87 g.

As a result, the reaction produced 166.87 g of AlCl3.

Learn more about  aluminum chloride here:

https://brainly.com/question/14510824

#SPJ4

Each hydrogen atom only requires one electron because the valence electrons of hydrogen can only fit a maximum of two into their orbital. Since each atom only has one valence electron.

A valence electron is an electron in an atom's outer shell that can take part in the production of a chemical bond if the outer shell is not closed. This concept is used in both chemistry and physics. One valence electron from each atom in the link is contributed to creating a shared pair in a single covalent bond.

The valence of an element—whether it can bind with other elements and, if so, how quickly and with how many other elements—may be determined by the existence of valence electrons. Thus, the electrical arrangement of an element has a significant impact on its reactivity. A valence electron can only reside in the outermost electron shell of a main-group element and a transition metal.

Learn more about valence electron here:

https://brainly.com/question/15054861

#SPJ4

The following reaction yields the Hoffman product and no Zaitsev product at all, even though the base is not sterically hindered because it proceeds through the E2 mechanism.

The reaction is under through E2 mechanism. In the E2 mechanism, the base abstracts the proton that is opposite to the leaving group. Bromine is the leaving group in the above-mentioned molecule, having two neighboring hydrogen atoms. The hydrogen atom opposite the bromine atom can take part in the E2 reaction. and the hydrogen having the same side as bromine cannot take part in the reaction. So the reaction yields the Hoffman product and no Zaitsev product at all.

The complete question is attached.

You can also learn about E2 mechanism from the following question:

https://brainly.com/question/2049168

#SPJ4

The Lewis structure of the hydrogen cyanide molecule is represented by the image shown.

We know that the Lewis structure is showing us the relationship between the electrons pairs in the compound and its overall properties. The Lewis structure consists of the symbol of the element and the electrons pairs that surround the atom.

We can see that in hydrogen cyanide there is a nitrogen atom and there is a hydrogn atom and also one carbon atom. The bond between carbon and nitrogen is covalent while the bond between hydrogen and the cyanide moiety is covalent.

Learn more about Lewis structure:https://brainly.com/question/20300458

#SPJ1

A sample of helium gas is stored in a tank at 18 atm and 20°c. The conditions compare to the conditions of a gas at stp are higher pressure and higher temperature.

in stp condition temperature of 273.15 °K (0 °C, 32 °F) and an absolute pressure of exactly 105 Pa (100 kPa, 1 atm).

In the open air, helium exerts very little pressure. Diffusion through a plane wall can be thought of as being one-dimensional since D≥L. Quasi-steady diffusion occurs when pressure changes are slow enough to allow for the assumption of steady-state conditions for diffusion through fused silica at any given time. The density of stationary medium is constant.

Ideal gas behavior is displayed by helium.

PV=nRT

P∝ t

learn more about ideal gas behavior at

https://brainly.com/question/28535240

#SPJ4

If pewter does not contain lead than it is safe to use for food.

Old pewter is made from tin and lead. Since there is no safe level for lead exposure, use of lead is not advisable. Even though we use it only occasionally, in a way that is still worse, for that the salt has contact with the pewter for a longer period, giving it more opportunity to absorb any lead that may be causing leaching.

Modern pewter is usually lead-free and also safe to use. It is made from 95% tin, plus copper and also antimony. So these kinds of  pewter products  are guaranteed lead-free and quite safe to be used for all kinds of food and drink as well. So we can use lead free pewter for drinks and food.

To know more about pewter

https://brainly.com/question/25117805

#SPJ4

The molecular formula of the unknown gas is C4H10 is the gas.

Solution:

moles H = 17 / 1.008 = 16.9

moles of C = 83/12 =6.91

so ratio of H to C = 16.9/ 6.91 = 2.45

C H 2.5 to get whole numbers multiply by 2 C2H5 = empirical formula = molar mass = 29 g/mol

apply Graham's law to get the molar mass of the unknown gas

0.87 / 1= sq.rt ( 44/x)

x = 58 g/mol

58/29= 2

C4H10 is the gas

One mole is defined as the amount of substance containing as many units as there are atoms in 12 grams of carbon. This is 6.022 x 10-23, also known as Avogadro's number. Mole volume at STP can be used to convert moles to gas volumes and gas volumes to moles. Whenever you write a chemical formula, write all gases in molecular form.

Learn more about The molecular formula here:-https://brainly.com/question/26388921

#SPJ4

There cannot be no exponents in the radicand greater than the index. There can be no exponents in the radicand that share a factor with the index.

When writing a square root, the radical symbol is used, and the number of expression inside the radical symbol—which is below symbolized by the letter a—is known as the radicand. By using the sign (read as plus minus) in front of the root, we can specify that we want both the positive and also the negative square roots of a radicand.

The number you're looking for the root of is the radicand, which may be found inside a radical sign. Depending on the subscript located outside and immediately before the radical symbol, it might be a sum of the squares, cube root, or another root.

To know more about radicand visit:

https://brainly.com/question/9266731

#SPJ4

The number of lone electron pairs on the central atom of a molecule having a linear molecular geometry, such as CO₂ is zero lone pair.

The atomic number of carbon is 6. the outermost valence electrons in the carbon is 4 . the atomic number of Oxygen is 8 and the outermost valence electrons are 6.

the CO₂  molecule is covalent compound. covalent compound are those which are formed by the sharing of the valence electrons. the central atom Carbon have two bonding electron pair , count each double bond as a single bond so the bond angle is 180° and the geometry is linear. the CO₂ contains zero lone pair.

To learn more about lone electron pairs here

https://brainly.com/question/4612758

#SPJ4

The lactose is an inducible, non-functional operon, which means that the genes are typically either translated or not.

Lactose is a naturally occurring sugar found within milk and other dairy products such yogurt and ice cream. It is produced when two additional sugar, glucose and galactose, combine. The body converts lactose into these two sugars using an enzyme called lactase so that it may be digested.

various forms of lactose intolerance The most prevalent form of lactose intolerance is primary, which develops as people age. secondary lactose intolerance (caused by disease or harm), Developmental lactose intolerance, or congenital lactose intolerance (having the condition from birth).

To know more about lactose visit:

brainly.com/question/28944214

#SPJ4

The majority of the time, ionic compounds are created between metal and nonmetal components.

Generally speaking, ionic bonding can be seen in compounds where a metal  bound to a quasi or a semi-metal. Molecular compounds are those that are made up entirely of non-metallic elements or semi-metals and non-metallic elements.

The bond between two hydrogen atoms in a water molecule, which is ionic in nature but has a covalent bond because it is positioned on one side of the negatively charged oxygen atom, is formed by the two hydrogen atoms.

To know more about  ionic bond visit:

https://brainly.com/question/9167977

#SPJ4

B, C, O , F is the ranking of the elements in order of their decreasing atomic radius.

What is the atomic radius?

To learn more about  atomic radius, refer:

https://brainly.com/question/15255548

#SPJ4

The molarity of the base would be 0.36 M.

The equation of the reaction when NaOH reacts with HBr in a neutralization reaction is written as:

[tex]NaOH + HBr --- > NaBr + H_2O[/tex]

The mole ratio of NaOH to HBr is 1:1.

Recall that: mole = molarity x volume

Also; molarity = mole/volume

Mole of 0.624 M, 27.4 mL HBr = 0.624 x 27.4/1000

                                                   = 0.017 mol

If the mole of HBr is 0.017 mol, the equivalent mole of NaOH will also be 0.017 mol.

0.017 mol of 47.2 mL (0.0472 L) NaOH would molarity of:

0.017/0.0472 = 0.36 M

In other words, the molarity of the NaOH is 0.36 M.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

47.2-ml sample of naoh is titrated with 0.624 m hbr. 27.4 ml of the acid are required to reach the equivalence point. what is the molarity of the base? multiple choice question.

A. 0.362 M

B. 0.0171 M

C. 0.0466 M

D. 1.07 M