Answer: A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Explanation:
When average temperature of Earth keeps on increasing for a longer period of time due to greenhouse gases, increased level of carbon dioxide and other gases etc then it is called global warming.
As humans use oxygen to sustain which is present in the air. So, when there will occur decrease in air quality that results from global warming then it means more illness or diseases will be there.
Hence, people will tend to die more often because of decrease in the air quality their health is getting affected.
Thus, we can conclude that a decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Answer:
A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Explanation:
Hope this helps.
What is the general function of enzymes in the human body?
O A. They make fatty acids unsaturated.
OB. They speed up chemical reactions.
O C. They store genetic information.
D. They carry instructions for making proteins.
Answer:
C
they store genetic information
B. They speed up chemical reactions
during summer water kept in an earthen pot become cool because of the phenomenon of
During summer water kept in an earthen pot become cool because of the phenomenon of evaporation.
Help ASAP Iill mark you as brainlister
C. Yes, if each sample contains 6.02 x 10²³ atoms.
Electrons will fill all empty orbitals within a sublevel before they begin to pair up. This is:
A. Hund’s rule
B. The Aufbau principle
C. None of these
D. Conservation of energy
Answer: Hund’s rule
Explanation:
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
Calculate the atomic mass/given their percent abundance
Answer:
A = 65.46 u
Explanation:
Given that,
The composition of zinc is as follows :
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
We need to find the average atomic mass of the given element. It can be solved as follows :
[tex]A=\dfrac{48.63\times 64+27.90\times 66+4.1\times 67+18.75\times 68+0.62\times 70}{100}\\A=65.46\ u[/tex]
So, the average atomic mass of zinc is 65.46 u.
what do you mean by thick pile of volcanic materials??
Answer:
You should repent God is coming back soon
The normal boiling point of ethanol is 78.4 oC. Its enthalpy of vaporization is 38.6 kJ/mol. Estimate the vapor pressure of ethanol at 26.3 oC.
Answer: The vapor pressure of ethanol at [tex]26.3^{o}C[/tex] is 238.3 torr.
Explanation:
Given: [tex]\Delta H_{vap}[/tex] = 38.6 kJ/mol
[tex]T_{1} = 26.3^{o}C = (26.3 + 273) K = 299.3 K[/tex]
[tex]T_{2} = 78.4^{o}C = (78.4 + 273) K = 351.4 K[/tex]
Formula used to calculate the vapor pressure of ethanol is as follows.
[tex]ln\frac{P_{2}}{P_{1}} = \frac{\Delta H_{vap}}{R} [\frac{1}{T_{1}} - \frac{1}{T_{2}}]\\[/tex]
Substitute the values into above formula as follows.
[tex]ln\frac{P_{2}}{P_{1}} = \frac{\Delta H_{vap}}{R} [\frac{1}{T_{1}} - \frac{1}{T_{2}}]\\ \\ln \frac{760 torr}{P_{1}} = \frac{38600 J}{8.314 J/mol K}[\frac{1}{299.3} - \frac{1}{351.4}]\\\frac{760}{P_{1}} = 3.18\\P_{1} = 238.3 torr[/tex]
Thus, we can conclude that the vapor pressure of ethanol at [tex]26.3^{o}C[/tex] is 238.3 torr.
Help please! Given that the enthalpy of reaction for a system at 298 K is –292 kJ/mol and the entropy for that system is 224 J/mol*K, what's the free energy for the system?
a) -87,793 kJ
b) -225 kJ
c) -66,751 kJ
d) 358 kJ
Answer:
C. -66, 751 kjExplanation:
hope it helps
During an experiment, solid iodine was placed in a sealed container. The container was gradually heated and purple-colored vapors of iodine formed were observed. Describe this system when it reaches phase equilibrium. (10 points)
Answer:
See explanation
Explanation:
For a chemical system in a state of dynamic equilibrium, the rate of forward reaction is equal to the rate of reverse reaction.
For this system under consideration;
I2(s)⇄I2(g)
When we heat the container, solid iodine is converted into purple coloured iodine vapour.
When equilibrium is achieved in the system, there will be no net change in the amount of solid iodine and iodine vapour present in the system since the rate of forward and reverse reactions are equal for a system in a state of equilibrium.
cuantas moléculas de oxigeno se producen por la descomposición de 28.5 g de H2O2 (masa molecular = 34.0g/mol) de acuerdo a la ecuación
2H2O2(l) → 2H2O(l)+O2(g)
The question is as follows: How many oxygen molecules are produced by the decomposition of 28.5 g of H2O2 (molecular mass = 34.0g / mol) according to the equation
2H2O2 (l) → 2H2O (l) + O2 (g)
Answer: There are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].
Explanation:
Given: Mass of [tex]H_{2}O_{2}[/tex] = 28.5 g
As moles is the mass of a substance divided by its molar mass. Hence, moles of [tex]H_{2}O_{2}[/tex] is calculated as follow.
[tex]Moles = \frac{mass}{molarmass}\\= \frac{28.5 g}{34.0 g/mol}\\= 0.838 mol[/tex]
According to the given equation, 2 moles of [tex]H_{2}O_{2}[/tex] gives 1 mole of [tex]O_{2}[/tex]. So, moles of [tex]O_{2}[/tex] produced by 0.838 moles of [tex]H_{2}O_{2}[/tex] will be calculated as follows.
[tex]Moles of O_{2} = \frac{0.838 mol}{2}\\= 0.419 mol[/tex]
This means that moles of [tex]O_{2}[/tex] produced is 0.419 mol.
As per the mole concept, 1 mole of every substance has [tex]6.022 \times 10^{23}[/tex] molecules.
So, molecules of [tex]O_{2}[/tex] present in 0.419 mole are as follows.
[tex]0.419 \times 6.022 \times 10^{23}\\= 2.52 \times 10^{23}[/tex]
Thus, we can conclude that there are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].
What is one characteristic that makes Earth capable of supporting life?
A. It has ocean currents that circulate water from pole to pole.
O B. It has a strong magnetic field that protects organisms from
harmful radiation.
C. It is in a solar system located in one of the outer arms of a spiral
galaxy
D. It has more mass than any of the other planets of the inner solar
system.
Answer:
it is option (d)
it has more mass than any of the other planets of the inner solar system
A 80°C la presion de vapor del benceno (C6H6) es de 1 atm. Calcula la cantidad de hexano (C6H14) que debemos añadir a 200g de benceno para que su presion de vapor sea de 700mm de Hg
Answer:
18,9g de hexano son necesarios
Explanation:
Basados en la ley de Raoult, la presión de vapor ejercida por una solución es:
P = P°*Xsolvente
Donde P es la presión de la solución deseada = 700mmHg, P° la presión de vapor de vapor del benceno = 1atm = 760mmHg y X es la fracción molar del solvente (Benceno).
Reemplazando:
700mm Hg = 760mmHg * X(Benceno)
0.9211 = X(Benceno)
La fracción molar de benceno se define como:
X = Moles benceno / Moles benceno + Moles hexano
Moles benceno -Masa molar: 78g/mol-
200g * (1mol/78g) = 2.5641 moles benceno
X = Moles benceno / Moles benceno + Moles hexano
0.9211 = 2.5641 moles benceno / 2.5641 moles benceno + Moles hexano
0.9211moles Hexano + 2.3618 = 2.5641
0.9211*Moles Hexano = 0.2023
Moles hexano = 0.2023/0.9211 = 0.2196 moles hexano.
Masa Hexano -Masa molar: 86g/mol-
0.2196 moles hexano * (86g/mol) =
18,9g de hexano son necesariosLa cantidad de hexano (C6H14) que se debe agregar a 200 g de benceno para permitir que la presión de vapor se convierta en 700 mm de Hg sería:
18.9 g
Usando la ley de Raoult, la presión de vapor que libera una solución se encuentra por:
P = P ° × X disolvente
Donde (P) denota la presión de la solución deseada
P ° denota la presión de vapor del benceno y
X denota la fracción molar del disolvente (benceno).
En el caso dado,
(P) = 700 mmHg,
P° = 1atm = 760mmHg
Fracción molar de benceno = 0,9211 (∵ 700/760)
La fracción molar de benceno (X) = Moles de benceno/Moles de benceno + Moles de hexano
Moles de benceno - Masa molar: 78g / mol - 200 g × (1 mol / 78 g)
= 2.5641 moles de benceno
X = Moles de benceno/Moles de benceno + Moles de hexano
0.9211 = 2.5641 moles Benceno/2.5641 moles Benceno + Moles de Hexano
⇒ 0,9211 × moles de Hexano + 2,3618 = 2,5641
⇒ 0.9211 × moles de Hexano = 0.2023
∵ Moles de Hexano = 0.2023/0.9211
[tex]= 0.2196 moles[/tex]
[tex]Hexane mass - Molar mass = 86g/mol - 0.2196 mole hexane[/tex] × [tex](86g/mole)[/tex]
[tex]= 18.9g[/tex]
Por tanto, 18,9 g es la respuesta correcta.
Learn more about "Benzene" here:
brainly.com/question/25798187
A UV wave has a smaller___
than visible light.
Answer:
wavelength
Explanation:
Describe what is happening within the system when it is at equilibrium in terms of concentrations, reactions that occur, and reaction rates.
Answer:
Describe what is happening within the system when it is at equilibrium in terms of concentrations, reactions that occur, and reaction rates.
Explanation:
The chemical equilibrium state is the state where the rate of forward reaction becomes equal to the rate of backward reaction.
At this stage the change in concentration of reactants becomes equal to the change in concentration of products.
The reaction will never cease.
That is the reason chemical equilibrium is called dynamic equilibrium.
So, forward and backward reactions will be taking place continuously at equal rates.
O2 oxygen is diatomicO + O O=O Double Bond
Answer:
O 100
Explanation:
What are the concentrations of hydronium and hydroxide ions in a solution with pH 2.6?
hey hi mate
wassup
answer is 4
explanation To calculate the pH of a solution, use the equation
p
H
=
−
log
[
H
3
O
+
]
Since we are given the hydronium ion (
H
3
O
+
) concentration of the solution, we can plug this value into the formula.
p
H
=
−
log
[
1.00
×
10
−
4
M
]
p
H
=
4
The pH of this solution is 4.
Added notes:
p
H
=
p
H
3
O
+
because hydrogen ions attach to water molecules for form hydronium ions.
Some other key things to remember for pH calculations include:
pH + pOH = 14
pH = -log[
H
+
]
pOH = -log[
O
H
−
]
[
H
+
]
=
10
−
p
H
[
O
H
−
]
=
10
−
p
O
H
Automobile airbags inflate due to the formation of nitrogen gas from the chemical reaction 2NaN3(s)—> 3N2(g)+2Na(s) Identify the number of each atom in the reactants and products for this balance reaction.
What are the reasons for Small Island States are particularly concerned with reducing carbon dioxide emissions
Answer:
- Because it could lead to rise in sea levels which could cause heavy floods in the Small Island States and thus destroy their economies.
Explanation:
The reason is that too much carbon dioxide emissions trapped in the atmosphere can cause global worming which includes climate change and rise in sea levels.
Now, due to the fact that we know islands are lands surrounded by water, a rise in sea level of by as small as 1 metre could be very dangerous to these small islands in that they could cause them to become flooded and thus cause harm to lives and properties thereby damaging their economies.
From the options provided for each element below, choose the properties that it may have based on its location in the periodic table.
Fluorine (F):
highly reactive nonmetal
shiny
a conductor
Answer:
highly reactive nonmetal
Explanation:
Fluorine is a member of group 7 elements on the periodic table called HALOGENS. Just like other members of its group like chlorine, iodine etc., fluorine is a nonmetallic element. Fluorine is regarded as the most reactive element on the periodic table because of its affinity to accept electrons i.e. most electronegative element.
According to this question, fluorine is an highly reactive nonmetal based on its location on the periodic table.
Answer:
highly reactive nonmetal
Explanation:
edge 21
NEED AN ANSWER ASAP!!! PLSSS
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Answer:
In both voltaic and electrolytic cells, oxidation occurs at the anode, while reduction occurs at the cathode. Thus, both these cells exhibit redox reactions. In both these cells, electrons flow from the anode to the cathode through the externally connected conductor.
Answer:
ELECTROLYTIC CELL
An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.
EXAMPLE
Nelsons cell and Downs cell
VOLTAIC CELL OR GALVANIC CELL
The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.
EXAMPLE
Daniel cell
Explanation:
What are the basic elements of selection of proffesion?describe any two
Answer:
overall I think one answer
Explain the difference between the movement of water molecules at room temperature and at 0 'C.
Answer:
at room temperature: -water is in liquid state bcecause of which molecules are freely moving
at 0°C:- it is freezing pointof water in this state water molecule can't move due to which there is no collision and chemical reaction will not take place
Explanation:
if i m right than tag me brilliant
The difference is in the speed of the molecules. At 0°C, the molecules move more slowly than at room temperature as their potential energy decreases.
What is the percent yield of either if 1.11L(d=0.7134 g/mL) is isolated from the reaction of 1.500L of C2H5OH
Answer:
Percent yield of ether = 83.18%
Explanation:
Equation of the synthesis reaction of ether from ethanol is given as follows :
2 C₂H₅OH -----> C₂H₅OC₂H₅ + H₂0
Density = mass / volume
Therefore mass = density × volume
Density of ether = 0.7134 g/mL; volume of ether produced = 1.11 L = 1110 mL; Molar mass of ether = 74 g/mol
Mass of ether produced = 0.7134 g/mL × 1110 mL = 791.874 g
Density of ethanol = 0.789 g/mL; volume of ethanol = 1.50 L = 1500 mL; molar mass of ethanol = 46 g/mol
Mass of ethanol reacted = 0.789 g/mL × 1500 mL = 1183.5 g
From the equation of reaction, 2 mole of ethanol produces 1 mole of ether
Mass of 2 moles of ethanol = 2 × 46 = 92 g
Therefore, 92 g of ethanol produces 74 g of ether
1183.5 g of ethanol will produce 1183.5 × 74/92 grams of ether = 951.945 g of ether
Percent yield of ether = actual yield/theoretical yield × 100%
Actual yield of ether = 791.874 g; theoretical yield of ether = 951.945 g
Percent yield of ether = (791.874 g × 951.945 g) × 100 %
Percent yield of ether = 83.18%
3. How many moles are present in 100 g of Ca(NO3)2?
PLEASEEE HELP ASAPP
0Answer: 0.6094
Explanation:
no of moles = mass / molar mass = 100/164.088= 0.6094 mole
Answer:
0.609 moles
Explanation:
mass in g ÷ atomic mass = moles
Ca(NO₃)₂ = 1 Ca 40.078 amu
2 N 28.0134 amu
+ 6 O 95.994 amu
____________________
164.0854 amu
100 g ÷ 164.0854 amu = 0.609 moles
three significant digits
what is the application of chemistry
Answer:
Chemistry plays an important and useful role towards the development and growth of a number of industries. This includes industries like glass, cement, paper, textile, leather, dye etc. We also see huge applications of chemistry in industries like paints, pigments, petroleum, sugar, plastics, Pharmaceuticals.
Under which conditions is a reaction spontaneous?Edmentum.
Answer:
When ΔS > 0 and ΔH < 0, the process is always spontaneous as written. When ΔS < 0 and ΔH > 0, the process is never spontaneous, but the reverse process is always spontaneous. When ΔS > 0 and ΔH > 0, the process will be spontaneous at
Explanation:
What are the best conditions to lead towards a spontaneous reaction? high negative enthalpy, high temp, high positive entropy. Your enthalpy is high and negative but your entropy is also negative.
The bottle slides down the hill and is moving at a velocity of 14 meters/second the instant it hits the ground. The vertical height from where Jeff dropped the bottle is meters. Ignore friction, and use , PE = m × g × h, and g = 9.8 m/s2.
Answer:
10 m
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 14 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Next, we shall determine the energy. This can be obtained as follow:
Velocity (v) = 14 m/s
Kinetic Energy (KE) =?
KE = ½mv²
KE = ½ × m × 14²
KE = ½ × m × 196
KE = m × 98
Finally, we shall determine the height. This can be obtained as follow:
Kinetic energy (KE) = m × 98
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Since the object is falling from a particular height,
Potential energy (PE) = kinetic energy (KE)
PE = mgh
KE = m × 98
m × 9.8 × h = m × 98
Divide both side by m × 9.8
h = m × 98 / m × 9.8
h = 10 m
Thus, the bottle was dropped from a height of 10 m
In the SI system of units, the mole is one of seven base units. It is frequently used in chemical calculations. However, a mole of something is just a particular quantity of it. It is not a unit of measure in the way that meters, seconds, and kilograms are. Calculations performed with the number of moles of a substance could also be performed with the number of particles of a substance. Based on this information, do you think that the mole should be considered a base unit in the SI system? Explain why or why not.
The international system of units is known as SI and is a metric system. Mostly used as a system of measurement. It is used in science, technology, and nearly in every part of the country. The system includes coherent units known as derived units.
A mole is not a base unit or any property of the units. It can be used for physical and chemical comparison and hence the mole of substance can be performed with the number of particles of the substance.Hence the option B is correct.
Learn more about the frequently used in chemical calculations.
brainly.com/question/26120603.
If 250 grams of water is to be heated from 24.0°C to 100.0°C to make a cup of tea, how much
heat must be added? The specific heat of water is 4.18 J/g∙C
Answer:
[tex]\boxed {\boxed {\sf 79,420 \ J}}[/tex]
Explanation:
We are given the mass, a change in temperature, and the specific heat of water. We should use the following formula to solve this problem.
[tex]q=mc\Delta T[/tex]
In this formula, m is the mass, c is the specific heat, and ΔT is the change in temperature.
We know there are 250 grams of water and the specific heat of water is 4.18 J/g · °C.
We are given two temperature, so have to find the change in temperature. This is the difference between the initial temperature and final temperature. The water is heated from 24 °C to 100 °C. Therefore, the initial is 24 and the final is 100.
[tex]\bullet \ \Delta T= T_{final} - T_{initial} \\\bullet \ \Delta T=100 \textdegree C - 24 \textdegree C\\\bullet \Delta T= 76 \textdegree C[/tex]
Now we know all three of the variables and we can substitute them into the formula.
[tex]\bullet \ m= 250 \ g\\ \bullet \ c=4.18 \ J/g \textdegree C \\ \bullet \ \Delta T= 76 \textdegree C[/tex]
[tex]q= (250 \ g)( 4.18 \ J/g * \textdegree C)( 76 \textdegree C)[/tex]
Multiply the first two numbers together. The units of grams will cancel.
[tex]q= (1045 \ J/\textdegree C)(76 \textdegree C)[/tex]
Multiply again. This time, the units of degrees Celsius cancel.
[tex]q= 79420 \ J[/tex]
79, 420 Joules of heat must be added.
if you have a pop quiz and you get nervous is that unconditioned response? if yes why? if not what kind of response is it
