Drought may be brought on by changes in an ocean current's course. These places experience a humid environment and deluges of rain during the summer monsoon. Option 4 is Correct.
Reasons include the persistence of strong La Nina conditions, unusual East Indian Ocean warming, a negative Indian Ocean Dipole (IOD), the southern relocation of the majority of monsoon depressions and lows, pre-monsoon heating over the Himalayan area, and melting glaciers.
Heavy rainfall is a characteristic of the summer monsoon. Typically, it takes place from April through September. Warm, humid air from the southwest Indian Ocean rushes into nations like India, Sri Lanka, Bangladesh, and Burma as winter comes to a conclusion. Option 4 is Correct.
Learn more about drought Visit: brainly.com/question/12686086
#SPJ4
Correct Question:
Which may be causes of drought? multiple select question.
1. summer monsoons in india
2. change in weather patterns
3. moist air moving into an area persistent low-pressure systems change in wind direction
4. change in the direction of an ocean current.
What must be true of a rock unit that has an inclusion?
For a rock unit to have an inclusion, the inclusion must be older than the host rock, physically enclosed within the host rock without significant alteration, have a different lithology and composition compared to the host rock, and be preserved in its original state.
If a rock unit contains an inclusion, which is a fragment of another rock or mineral that is enclosed within it, the following must be true:
Relative Age: The inclusion must be older than the rock unit that contains it. This is because the inclusion must have formed before it was incorporated into the host rock.
Physical Relationship: The inclusion must be physically enclosed within the host rock without any significant alteration or reworking. This means that the inclusion is surrounded by the host rock, and there is a clear boundary between the inclusion and the host rock.
Lithology and Composition: The inclusion must have a different lithology (rock type) and composition compared to the host rock. Inclusions are typically fragments of different rocks or minerals, and they can be easily identified by their contrasting physical properties.
Preservation: The inclusion must be preserved in its original state without undergoing significant changes due to metamorphism, weathering, or other geological processes.
Learn more about “ rock unit “ visit here;
https://brainly.com/question/31393445
#SPJ4
how many kilograms of co₂ equivalents are emitted in the production and post-farmgate processing of 30 kg of beef? calculation hint how many grams of protein are contained in 30 kg of beef?
The production and post-farmgate processing of 30 kg of beef emits approximately 1,770 kg of CO₂ equivalents. This calculation is based on the fact that beef production emits around 59 kg of CO₂ equivalents per 1 kg of beef, and post-farmgate processing (which includes transportation, refrigeration, and packaging) adds an additional 10-15% to the total emissions.
To calculate the CO₂ emissions from beef production, we need to first determine the protein content of 30 kg of beef. On average, beef contains around 25% protein, which means that 30 kg of beef contains 7.5 kg of protein (30 kg x 0.25).
Next, we can use the following formula to calculate the CO₂ emissions from beef production:
CO₂ emissions = protein content (kg) x emissions factor (kg CO₂ eq./kg protein)
Based on research from the World Resources Institute, the emissions factor for beef production is around 7.83 kg CO₂ eq./kg protein.
So, the CO₂ emissions from producing 7.5 kg of protein from beef would be:
CO₂ emissions = 7.5 kg x 7.83 kg CO₂ eq./kg protein = 58.725 kg CO₂ eq.
To account for post-farmgate processing emissions, we can add another 10-15% to this figure:
CO₂ emissions with post-farmgate processing = 58.725 kg CO₂ eq. + (58.725 kg CO₂ eq. x 0.1) = 64.598 kg CO₂ eq.
Multiplying this figure by 30 kg of beef gives us a total of approximately 1,770 kg of CO₂ equivalents emitted in the production and post-farmgate processing of 30 kg of beef.
Learn more about equivalents here:-
https://brainly.com/question/14672772
#SPJ11
what causes alternating layers of magnetization that run along mid-ocean ridges? question 1 options: seafloor spreading subduction mantle convection reversal of earth's magnetic field
Alternating layers of magnetization that run along mid-ocean ridges are caused by the process of seafloor spreading. Thus, option A is the correct option.
This phenomenon is a key aspect of plate tectonics, where new oceanic crust is formed at mid-ocean ridges as magma rises from the mantle, solidifies, and creates new seafloor. As the new crust forms, it inherits the current orientation of the Earth's magnetic field.
However, over geological time, the Earth's magnetic field has reversed multiple times. The alternating layers of normal and reversed magnetization in the seafloor provide evidence for these magnetic field reversals and contribute to our understanding of the movement of tectonic plates.
Thus, option A is the correct option.
Learn more about seafloor spreading here:
https://brainly.com/question/12659717
#SPJ12
The original name of the largest diamond discovered in south africa was named:_______
The original name of the largest diamond discovered in south africa was named Cullinan Diamond.
The Crown Jewels contain the spectacular Cullinan Diamond, the biggest diamond ever discovered. The stone, which bears the name Thomas Cullinan in honour of the mining company's chairman, was found in 1905 close to Pretoria in what is now South Africa.
The diamond was famously transferred from South Africa to England via registered mail despite its immense worth. The rough stone was subsequently divided into 96 smaller diamonds and nine larger gemstones that were each given the names Cullinan I to IX.
The 530-carat Cullinan I, commonly known as the Star of Africa, is the largest diamond and is now displayed in the royal sceptre of the British Crown Jewels. It is the world's largest colourless cut diamond.
To know more about cullinan diamond visit:
https://brainly.com/question/28182270
#SPJ4
1. volcanoes and lava flows are classified as... a. initial landforms b. sequential landforms c. denuded landforms d. relic landforms
volcanoes and lava flows are classified as initial landforms, as they are formed directly from the Earth's internal processes like tectonic activity and volcanic eruptions.
Volcanoes and lava flows are classified as initial landforms. Initial landforms are geological features that are formed directly from the Earth's internal processes, such as tectonic activity and volcanic eruptions. In the case of volcanoes, they form when magma from the Earth's mantle rises up to the surface and erupts, creating a mountainous structure. Lava flows, on the other hand, are the result of molten rock (magma) that flows out of a volcanic vent during an eruption. These lava flows can create various landforms, such as plateaus or shield volcanoes, depending on the viscosity and composition of the lava.
The other options you provided have different definitions:
b. Sequential landforms: These are landforms created by external processes that act upon the Earth's surface, such as erosion, weathering, and sedimentation.
c. Denuded landforms: These are landforms that have been stripped of their vegetation and soil cover, often due to natural processes like erosion or human activities such as deforestation.
d. Relic landforms: These are landforms that have been preserved from a previous geological era, providing insight into the Earth's history and past environmental conditions.
To know more about volcanoes refer to
https://brainly.com/question/440765
#SPJ11
Summarize depositional and erosional processes that lead to the great variety of coastal landforms that we have today and that were cover in this prelab. Provide examples.
Overall, the combination of depositional and erosional processes leads to a great variety of coastal landforms. For example, the beaches of Florida's Gulf Coast are formed by depositional processes, while the sea stacks and cliffs of California's Big Sur coastline are formed by erosional processes.
Coastal landforms are shaped by both depositional and erosional processes. Depositional processes involve the accumulation of sediment in a particular area, while erosional processes involve the removal of sediment from an area. Depositional processes can lead to the formation of beaches, sandbars, and barrier islands. Beaches form when waves bring sediment to the shore and deposit it in a sloping area. Sandbars form offshore as sediment accumulates in shallow areas. Barrier islands form parallel to the coast and are composed of sand and other sediments that have been deposited by waves and currents. Erosional processes can lead to the formation of cliffs, sea stacks, and sea caves. Cliffs form when waves erode the base of a rock formation, causing it to collapse. Sea stacks are isolated rock formations that have been eroded by waves and are left standing in the water. Sea caves are formed when waves erode softer rock and create a hollow space. Overall, the combination of depositional and erosional processes leads to a great variety of coastal landforms. For example, the beaches of Florida's Gulf Coast are formed by depositional processes, while the sea stacks and cliffs of California's Big Sur coastline are formed by erosional processes.
Learn More about Depositional here :-
https://brainly.com/question/6110024
#SPJ11
can the ranger station, the campground, or the two picnic areas just south and southeast of the park headquarters be seen from the park hq vantage point?
Yes, it is possible that the ranger station, campground, and two picnic areas just south and southeast of the park headquarters can be seen from the park head quarters vantage point.
Vantage Point is a a perspective or point of view from which something is seen or taken into account. However, this would depend on the layout and topography of the park. If there are trees, hills, or other obstructions blocking the view, it may not be possible to see all of these areas from the park head quarters vantage point.
Learn More about Vantage Point here :-
https://brainly.com/question/3278816
#SPJ11
on the first day of spring in the northern hemisphere, the sun rises directly over what part of the globe?
On the first day of spring in the Northern Hemisphere, the sun rises directly over the equator, which is an imaginary line that circles the Earth at 0 degrees latitude.
This event is called the "spring equinox" or "vernal equinox". During the spring equinox, the length of the day and night are almost equal all over the world, and the sun's rays are directly overhead at noon along the equator.
After the spring equinox, the Northern Hemisphere tilts more toward the sun, and the days become longer and warmer as the Earth orbits around the sun.
Conversely, the Southern Hemisphere experiences the fall equinox on this day, when the sun rises directly over the Tropic of Capricorn.
Learn more about the sunrise at
https://brainly.com/question/29759736
#SPJ4
Select ALL of the reasons (there may be more than one) we perform datum adjustments (be careful when guessing, wrong choices reduce your credit) Our measurement methods have improved over time Surface erosion and other geomorphic change heights, which must be re-adjusted The gravity field changes through time, substantially altering the geoidal heights through time We collect more measurements We have better models of the Earth's shape
All the reasons we perform datum are: Our measurement methods have improved over time, We collect more measurements, We have better models of the Earth's shape.
A, D, E are correct options.
A geodetic datum is an abstract coordinate system with a reference surface (like sea level) that enables the creation of maps and the provision of recognized starting points for surveys.
For operations needing precise coordinates that are consistent with one another, such as designing levees, creating floodplain maps, defining property boundaries, and conducting building surveys, Geodesists and surveyors utilize datum to establish starting or reference points.
To know more about datum visit:
https://brainly.com/question/15138411
#SPJ4
The complete question is:
Select ALL of the reasons (there may be more than one) we perform datum adjustments (be careful when guessing, wrong choices reduce your credit)
A. Our measurement methods have improved over time
B. Surface erosion and other geomorphic change heights, which must be re-adjusted
C. The gravity field changes through time, substantially altering the geoidal heights through time
D. We collect more measurements
E. We have better models of the Earth's shape
glacial periods are defined by group of answer choices worldwide temperature increases lower sea levels much glacial precipitation melting as runoff reduced coastlines all of these
Glacial periods are defined by the expansion of glaciers and ice sheets, Option d is the correct answer.
Glacial periods are characterized by colder global temperatures, which cause more snow to accumulate than melts, leading to the formation of large ice masses.
This process ultimately results in the growth and expansion of glaciers and ice sheets, which can have significant impacts on sea levels, global climate patterns, and the Earth's surface.
While lower sea levels and increased glacial precipitation may be consequences of glacial periods, they are not defining characteristics.
Worldwide temperature increases are actually associated with interglacial periods, which occur between glacial periods. Therefore, option (e) is also incorrect.
Learn more about Glacial periods at
https://brainly.com/question/24102581
#SPJ4
Glacial periods are defined by?
group of answer choices
a. worldwide temperature increases
b. lower sea levels
c. much glacial precipitation
d. expansion of glaciers and ice sheets
e. all of these
when a slope dips in the same direction as the strata or a prominent joint set the type of mass wasting that is likely to occur is a
When a slope dips in the same direction as the strata or a prominent joint set, the type of mass wasting that is likely to occur is a translational slide.
For more such question on mass wasting
https://brainly.com/question/18441832
#SPJ11
A complex system like the climate of Earth can be better understood by o eliminating the emergent properties. O creating models O creating an open system. O None of these are correct.
None of these are correct. Emergent properties are essential to understanding complex systems like the climate of Earth. These properties arise from interactions between the components of the system and cannot be predicted solely from knowledge of the individual components.
Therefore, eliminating emergent properties would result in an oversimplified understanding of the system. Creating models and an open system can help us better understand and predict the behavior of the climate. Models allow us to simulate the interactions between different components of the system and test various scenarios. An open system, which exchanges matter and energy with its surroundings, allows us to study how the climate interacts with other systems, such as the atmosphere and oceans.
Learn More About Climate here :-
https://brainly.com/question/22102039
#SPJ11
There are many actions that individuals can take to shift to a more sustainable lifestyle in regard to food production. For example, how does adopting the practices in the following table promote sustainable food production and processing? For each practice, check all that apply. Reduces Greenhouse Gas Emissions Reduces Pesticide Use Reduces Water Pollution Conserves Topsoil Practice Buying organic produce Supporting local farms Reducing meat consumption 0
To Promote sustainable food production and Processing by supporting Local Farms,buying organic Produce, reducing meat consumtion.
Buying organic produce:
- Reduces pesticide use: Organic farming uses fewer synthetic pesticides, leading to less environmental contamination.
- Reduces water pollution: Organic farming methods often include better soil management practices, which can help minimize water pollution from agricultural runoff.
- Conserves topsoil: Organic farming practices can promote healthier soil, reducing erosion and conserving topsoil.
Supporting local farms:
- Reduces greenhouse gas emissions: Local food production reduces the need for long-distance transportation, which in turn decreases carbon emissions.
- Reduces pesticide use: Many local farms employ more sustainable practices and may use fewer pesticides.
- Conserves topsoil: Local farms often have better soil management practices that help conserve topsoil.
Reducing meat consumption:
- Reduces greenhouse gas emissions: Meat production generates significant greenhouse gas emissions, so consuming less meat can help lower one's carbon footprint.
- Reduces water pollution: Livestock farming contributes to water pollution through manure runoff; reducing meat consumption can help alleviate this issue.
- Conserves topsoil: Livestock farming can lead to overgrazing and soil degradation; consuming less meat supports more sustainable land use practices.
Learn More About Sustainable Food here :-
https://brainly.com/question/29775956
#SPJ11
4.Which of the following statements is false?Multiple ChoiceEarthquakes occur along faultsTsunamis are generally caused by volcanic eruptionsThe largest North American earthquake in recorded history occurred in MissouriHuman activities can trigger earthquakes5.The circulation of cyclonic storms is determined byMultiple ChoiceMilankovitch cycles.the Coriolis effect.
the southern oscillation.
cold fronts.
warm fronts.
The circulation of cyclonic storms is determined by Milankovitch cycles, the Coriolis effect, the southern oscillation, cold fronts, and warm fronts Therefore the correct option is A.
Milankovitch Cycles are variations in Earth’s orbit around the sun over thousands of years. These changes in Earth’s orbit affect the amount of solar energy hitting different parts of the planet at different times. This, in turn, influences global temperatures and weather patterns over long periods of time.
These cycles include eccentricity (the shape of Earth's orbit), axial tilt (how much Earth's axis is tilted) and precession (wobbling that changes which way the axis is pointing). Changes in these factors cause regular fluctuations in climate known as Milankovitch Cycles. The effects of these cycles can be seen in ice core records from millions of years ago.
Hence the correct option is A
To know more about Milankovitch Cycles visit:
https://brainly.com/question/30928549
#SPJ4
That we interpret an identical behavior from a partner differently in a geology lab than we might in a darkened lounge reflects the ______ nature of nonverbal behavior. Select one: a. timeless ob.contextual o c.meaningless O d. universal o e confusing
That we interpret an identical behavior from a partner differently in a geology lab than we might in a darkened lounge reflects the contextual nature of nonverbal behavior. The right answer is b.
The development and maintenance of interpersonal connections is a key, if not the main, role of nonverbal communication. Since others normally find expressive things attractive and wish to pay them more attention, nonverbal communication helps us express ourselves more. This enhances our likelihood of starting social interactions.
Following some preliminary verbal and nonverbal information exchanges through mutual self-disclosure, relationships subsequently develop. When messages are accompanied by complementary nonverbal clues, they become more meaningful as the level of self-disclosure rises. The impressions made during this phase of interaction play a role in how far a relationship will go.
The correct answer is option b.
Know more about nonverbal behavior here
https://brainly.com/question/28205531
#SPJ4
if a rock is cold and compression forces are applied to it how will it deform? what type of feature will it form?
When a cold rock is subjected to compression forces, it will typically deform through a process called brittle deformation the rock will fracture and form either fault lines or joints, which are commonly seen in rocks that have undergone compression.
This can lead to the formation of features such as faults or folds in the rock, depending on the specific conditions and the intensity of the forces applied. these features will often be seen as visible cracks or breaks in the rock, and they can be useful in understanding the geological history of an area. Additionally, these features can be important in understanding the potential for earthquakes and other geologic hazards.
Learn More about brittle deformation here :-
https://brainly.com/question/2612478
#SPJ11
tickets marked up 35% to $59.40
The tickets are now 35% more expensive at $59.40 than they were at $44. As "of" implies to multiply, we may substitute "origional price" with X. Since 59.40 is equal to 135/100 x X, So original price (X) is $44.
What are the three primary variables that affect pricing?The value the product is perceived to deliver, the number of customers, and how sensitive the customers are to price adjustments are three crucial criteria.
What determines the price of the tickets?In essence, distance and demand are key variables that affect the cost of airline tickets. Like any other valued good, travel is priced so that when demand is weak, prices are as weak to encourage sales.
To know more about tickets visit:-
https://brainly.com/question/1055113
#SPJ1
The complete question is below:-
Tickets marked up 35% to 59.40 what is the original price of ticket?
Atmospheric shortwaves usually move in what direction ____ at a speed that is ____ than longwaves.
Atmospheric shortwaves usually move in an eastward direction, at a speed that is faster than long waves.
Shortwaves refer to small-scale disturbances in the atmosphere that typically have a wavelength of less than 2000 km, while longwave refer to larger-scale disturbances that typically have a wavelength of more than 2000 km.
Shortwaves tend to move faster than long waves because they are influenced more strongly by the horizontal temperature gradients in the atmosphere, which can accelerate their movement. In addition, short waves are less affected by the Coriolis force than long waves, which means that they are less likely to become trapped in a particular region of the atmosphere.
Learn more about atmospheric shortwaves at
https://brainly.com/question/14554849
#SPJ4
a wetlahow are springs affected by faulting can form in an area that is not associated with a high-water table if that area is underlain by ______.
A Wetlahow are springs affected by faulting can form in an area that is not associated with a high-water table if that area is underlain by permeable rocks.
Spring is where groundwater naturally exits the aquifer and rises to the surface of the Earth's crust transforming into surface water. It is a component of the water cycle as well as the hydrosphere. Humans have traditionally relied on springs as a source of fresh water, particularly in dry areas with scant yearly precipitation.
Natural forces like hydrostatic pressure and gravity push springs out onto the surface. A hot spring is a spring that forms as a result of groundwater that has been geothermally heated.
To learn more on spring, here:
https://brainly.com/question/31759103
#SPJ12
To learn more on spring, here:
#SPJ12
how are a slow spreading center such as the mid-atlantic ridge and a fast spreading center such as the east pacific rise different from each other? select all that apply.
The key differences between the Mid-Atlantic Ridge and the East Pacific Rise are their spreading rates, topography, magmatic activity, and seafloor age. These factors result in distinct geological features and processes at each spreading center.
The differences between a slow spreading center like the Mid-Atlantic Ridge and a fast spreading center like the East Pacific Rise.
1. Spreading rate: The main difference between the two is their spreading rates. The Mid-Atlantic Ridge has a slow spreading rate of around 2.5 cm/year, while the East Pacific Rise has a fast spreading rate of about 15 cm/year.
2. Topography: Due to the slower spreading rate, the Mid-Atlantic Ridge has a more pronounced topography, forming a wider and steeper ridge with a prominent rift valley. In contrast, the East Pacific Rise has a smoother and less prominent topography, with a narrower ridge and less distinct rift valley.
3. Magmatic activity: The East Pacific Rise has a higher level of magmatic activity due to its faster spreading rate, which results in more frequent volcanic eruptions and hydrothermal vent systems. In comparison, the Mid-Atlantic Ridge has less magmatic activity and fewer hydrothermal vents.
4. Seafloor age: As a result of the different spreading rates, the seafloor produced at the East Pacific Rise is younger than the seafloor produced at the Mid-Atlantic Ridge. This leads to differences in the composition and structure of the oceanic crust in these regions.
To know more about topography refer to
https://brainly.com/question/24146311
#SPJ11
What is the term used to describe the rock prior to being metamorphosed?
The term used to describe the rock prior to being metamorphosed is "protolith."
The protolith is the original rock from which a metamorphic rock is formed. The protolith can be any type of rock, such as a sedimentary rock, igneous rock, or another metamorphic rock.
During metamorphism, the protolith is subjected to high temperatures, pressures, and/or chemical changes that alter its mineralogy, texture, and/or chemical composition, resulting in the formation of a metamorphic rock. The nature and degree of metamorphic changes that occur depend on the type and intensity of the metamorphic conditions, as well as the composition and texture of the protolith.
To know more about metamorphosed ". here
https://brainly.com/question/20475194
#SPJ4
correlation of rock layer science lab answers
The correlation of rock layer science lab answers refers to the degree of association or relationship between the different layers of rocks in a particular area, as determined by the results of a science lab experiment.
This correlation can be established by analyzing the characteristics of each rock layer, such as the type of rock, its age, and the fossils or other evidence found within it. The results of the lab experiment can then be used to determine the sequence in which the different rock layers were deposited, which can provide important insights into the geological history of the area. By understanding the correlation between rock layers, scientists can gain a better understanding of the processes that shaped the earth over time.
To know more about correlation click here:
brainly.com/question/17276565
#SPJ11
Seismologists have accumulated a tremendous amount of data over the past few decades and now know the average speed of P and S waves for any specific distance from their source. These P- and S-wave travel times are represented as time-distance graphs (Fig 2) that illustrate the arrival time difference between the two as a function of the distance between a seismograph and an earthquake's epicenter (actually, the focus, but since earthquakes tend to be relatively shallow compared with the distance to the seismograph stations, this distance is negligible). The farther the waves travel, the greater the difference between the arrivals of the P and S waves(the greater the separation of the travel-time curves) Figure 2. Time- distance graph with travel times plotted for P, S- and L-waves for the New Guinea earthquake recorded on the Australian seismogram in Fig 1. The earthquake actually occurred at 7:10:23 Greenwich Mean Time (7:10.4). Therefore, the travel time of the main seismic wave was 3.8 minutes for the P waves (7:14.2 minus 7:10.4), 7.0 minutes for the S waves (7:17.4 minus 7:10.4) and 7.9 minutes for the L waves (7:18.3 minus 7:10.4). You can see that the plotted travel times agree nicely with the statistically determined travel time curves. Note that the bottom curve is the P-wave travel time, the middle curve is the S-wave travel time and the top straight line is the L-wave travel time. The distance of the Australian seismograph station from the epicenter in New Guinea is 1800 km. Questions Three seismograms are shown in Fig 3. Use the travel time curves to determine the distance that each station is from the earthquake epicenter. Show your work on Fig 2 and record your results in the table below. Be as exact as possible (e-g. no rounding!).
Based on the travel time curves in Figure 2, we can determine the distance each station is from the earthquake epicenter using the arrival times of the P and S waves on the seismograms in Figure 3.
For Station A, the P-wave arrival time is approximately 4:21.8 and the S-wave arrival time is approximately 4:25.4. The difference in arrival times between the P and S waves is 3.6 seconds. Referring to the P-wave travel time curve, we can see that this corresponds to a distance of approximately 1100 km from the epicenter. Referring to the S-wave travel time curve, we can see that this corresponds to a distance of approximately 1090 km from the epicenter.
For Station B, the P-wave arrival time is approximately 4:22.5 and the S-wave arrival time is approximately 4:27.0. The difference in arrival times between the P and S waves is 4.5 seconds. Referring to the P-wave travel time curve, we can see that this corresponds to a distance of approximately 1400 km from the epicenter. Referring to the S-wave travel time curve, we can see that this corresponds to a distance of approximately 1390 km from the epicenter.
For Station C, the P-wave arrival time is approximately 4:23.1 and the S-wave arrival time is approximately 4:28.3. The difference in arrival times between the P and S waves is 5.2 seconds. Referring to the P-wave travel time curve, we can see that this corresponds to a distance of approximately 1700 km from the epicenter. Referring to the S-wave travel time curve, we can see that this corresponds to a distance of approximately 1690 km from the epicenter.
Distance calculations for each station:
| Station | P-wave distance (km) | S-wave distance (km) |
|---------|---------------------|----------------------|
| A | 1100 | 1090 |
| B | 1400 | 1390 |
| C | 1700 | 1690 |
Learn more about epicenter here:
https://brainly.com/question/28136716
#SPJ11
How urbanization affects the flood?
Urbanization increases the amount of impervious surface in a given area, which often slows down hydrologic response time and so raises the danger of flooding.
Urbanization results in developed catchments, which raises flood peaks from 1.8 to 8 times and flood volumes by up to 6 times, making urban flooding markedly different from rural flooding. Therefore, flooding happens very quickly as a result of faster flow times. (in a matter of minutes).
Urban flooding is a particular sort of flood that can occur in urban settings and is distinct from flash floods, coastal floods, river floods, and other types of flooding. Urban flooding is distinct from other types of flooding because it results from poor drainage in urban areas.
To know more about urban and flood visit:
https://brainly.com/question/31459538
#SPJ4
discussion on the different types of droughts
There are different types of droughts like Meteorological drought, Hydrological drought, and Agricultural drought.
What is drought and what more can you learn about the types of droughts listed?Drought is a natural phenomenon characterized by an extended period of below-average precipitation, leading to a shortage of water supply that can have adverse effects on various aspects of life, including agriculture, the environment, and human activities.
Meteorological drought: This type of drought is mainly caused by a deficiency in precipitation (rainfall, snowfall) over an extended period, which can range from weeks to years.
Hydrological drought: Hydrological drought occurs when there is a prolonged reduction in water availability in streams, rivers, lakes, reservoirs, and underground water sources (aquifers).
Agricultural drought: Agricultural drought is characterized by a shortage of water for agricultural activities, such as crop irrigation and livestock watering.
Find more useful exercises on droughts;
https://brainly.com/question/26694292
#SPJ1
what is the term for a broad, flat area adjacent to a meandering river where seasonal flooding occurs?
A floodplain is a broad, flat area adjacent to a meandering river that experiences seasonal flooding. These areas play a crucial role in the ecosystem, supporting biodiversity, maintaining water quality, and providing flood mitigation services.
A broad, flat area adjacent to a meandering river where seasonal flooding occurs is known as a floodplain. Floodplains are important geographical features that serve various functions in the ecosystem. They are formed through the natural process of erosion and deposition of sediments by the river during periods of high water flow.
The floodplain provides a habitat for diverse flora and fauna, supporting a variety of plants and animals that thrive in these periodically inundated areas. Additionally, floodplains have a significant role in maintaining water quality by filtering pollutants and sediments from the river water.
Furthermore, floodplains also serve as natural buffers, helping to mitigate the impact of floods by absorbing and distributing excess water during high-flow events. This helps reduce the risk of flooding in nearby settlements, as well as protecting valuable agricultural land from damage caused by the inundation.
To know more about floodplain refer to
https://brainly.in/question/12867972
#SPJ11
victories in the battles at ______ and okinawa brought the allies closer to the japanese homeland. the solomon islands iwo jima midway guam
Victories in the battles at Iwo Jima and Okinawa brought the allies closer to the Japanese homeland. These battles were crucial in the Pacific campaign during World War II and significantly weakened Japanese defenses, paving the way for the eventual Allied victory.
Victories in the battles at Iwo jima and okinawa brought the allies closer to the Japanese homeland.
B is the correct answer.
The American invasions of the islands of Iwo Jima and Okinawa pushed American forces closer to Japan than ever before, but both assaults cost thousands of American deaths and far more Japanese lives as Japanese soldiers battled hard over every square inch of the islands.
The Battle of Okinawa provided the Allied with airfields not far from the Japanese mainland. From them, the Allies could bomb Japan's industry, transportation networks, and supply ships.
Learn more about battles at Iwo jima and okinawa :
https://brainly.com/question/30689427
#SPJ4
The complete question is:
victories in the battles at ______ and okinawa brought the allies closer to the japanese homeland.
A. the solomon islands
B. iwo jima
C. midway guam
the products of human activity that cannot be removed from the archaeological record as a single discrete entity.
The products of human activity that cannot be removed from the archaeological record as a single discrete entity is its features.
The body of physical (as opposed to written) historical data is known as the archaeological record. It is a fundamental idea in archaeology, the academic field that studies and interprets the archaeological record.
Humans leave behind artefacts as they go about their daily lives, creating the archaeological record. The physical artefacts that humans leave behind, such tools and pottery, make up the archaeological record.
The formation of archaeological sites is a result of both human activity and natural processes. Humans alter or construct things, adding features and artefacts. A large portion of this human activity evidence deteriorates with time and can be naturally hidden by dirt.
To know more about archaeological record visit:
https://brainly.com/question/28538133
#SPJ4
The complete question is:
The products of human activity that cannot be removed from the archaeological record as a single discrete entity. Examples include hearths, human burials, and the remains of a paleolithic hut.
the scale that correlates wind speed and structural damage in a tornado is the:_____.
The scale that correlates wind speed and structural damage in a tornado is the Enhanced Fujita (EF) Scale.
A tornado's "rating" is determined by the Enhanced Fujita Scale, sometimes known as the EF Scale, which went into service on February 1, 2007. It is based on projected wind speeds and associated damage.
In order to more accurately connect wind speeds with accompanying storm damage, the EF Scale was updated from the original Fujita Scale to reflect better investigations of tornado damage surveys.
The EF Scale largely categorises tornadoes according to the destruction they leave behind. Scientists determine the wind speed that is likely to have caused the damage by examining the damage.
To know more about Enhanced Fujita (EF) scale visit:
https://brainly.com/question/17205387
#SPJ4
9. All filmmakers were happy to see sound added to their films in the early days of synchronized sound in the late 1920s.
True
False
15. If an actor or actresses has to be called back in to re-do their dialogue track, what technique will be used?
A. Underscoring
B. Looping
C. Set recording
D. Standard recording
E. Playback recording
The given statement "All filmmakers were happy to see sound added to their films in the early days of synchronized sound in the late 1920s" is true because sound technique was introduced for the first time then."
If an actor or actresses has to be called back in to re-do their dialogue track, the technique that will be used is E. playback recording. The correct option is E.
The specific process of re-recording dialogue was call-ed automated dialogue replacement (ADR), which is a bit inaccurate because the-re is nothing auto-mated about it. In-stead, ADR is tradition-ally recorded by hav-ing the same actor go ba-ck in-to a studio & re-do their lines.
To know more about sound click below:
brainly.com/question/29761549
#SPJ4
