Which of the following are accurate methods for measuring the stated volumes? Select all that apply. Using a P200 to measure 2 ul Using a 250 ml cylinder to measure 200 ml Using a 100 ml beaker to measure 60 ml Using a P1000 to measure 680 ul Using a 50 ml conical tube to measure 50 ml

Answer: True

When ATP is broken down, energy is released.

According to Rutherford's theory, an atom's nucleus is surrounded by electrons that are negatively charged.

He also asserted that the electrons that surround the nucleus travel in a circular pattern at extremely high speeds. He gave these elliptical routes the name orbits. A positively charged, compact, and tiny nucleus with protons and neutrons makes up an atom. The nucleus of an atom contains all of its mass. (2) Negatively charged electrons surround the nucleus. The electrons are moving extremely quickly in a circular pattern around the nucleus. According to Rutherford's theory, an atom's nucleus is surrounded by electrons that are negatively charged. He also asserted that the electrons that surround the nucleus travel in a circular pattern at extremely high speeds.

The complete question is- according to rutherford’s model of the atom, how many electrons would be found in each of the following atoms?

Learn more about electron here-

https://brainly.com/question/20513633

#SPJ4

The concentration of the following in milligrams per liter will be: 0.01000 M Ca₂⁺ = 400.8 mg/ L, 0.02000 M H₂SO₄ = 1966.56 mg/L, 1.000 M HCO₃ = 61010 mg/L, 0.02000 M SO₄² = 1920.12 mg/L.

To convert the concentration of a solution from moles per liter (M) to milligrams per liter (mg/L), we need to multiply the molar concentration by the molar mass of the solute in grams.

0.01000 M Ca²⁺: The molar mass of Ca₂⁺ is 40.08 g/mol, so the concentration in mg/L is 0.01000 M × 40.08 g/mol × 1000 mg/g = 400.8 mg/L

0.02000 M H₂SO₄: The molar mass of H₂SO₄ is 98.08 g/mol, so the concentration in mg/L is 0.02000 M × 98.08 g/mol × 1000 mg/g = 1966.56 mg/L

1.000 M HCO₃-: The molar mass of HCO₃⁻ is 61.01 g/mol, so the concentration in mg/L is 1.000 M × 61.01 g/mol × 1000 mg/g = 61010 mg/L

0.02000 M SO₄²⁻: The molar mass of SO₄²⁻ is 96.06 g/mol, so the concentration in mg/L is 0.02000 M × 96.06 g/mol × 1000 mg/g = 1920.12 mg/L

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

A substance won't condense into a liquid or solid if the average kinetic energy is higher than the attraction forces holding the particles together. A liquid or solid will develop if the kinetic energy is lower than the attraction forces.

The structured hydrogen bonding connections that keep the molecules in the ice crystalline structure are eventually overcome as the ice melts as the molecules' kinetic energy rises. In the resultant liquid, the water molecules are held together by random hydrogen bonding connections.

Some of the intermolecular forces that are present in a substance's solid state are overcome as it melts. To counteract larger intermolecular forces, more energy is needed. Good! In order to overcome some of the intermolecular interactions present in the solid state, a higher melting point indicates that more energy is needed.

To learn about kinetic energy

https://brainly.com/question/15764612

#SPJ4

Energy from the sun promotes condensation, which in turn creates winds.

Water vapor turns into liquid through a process called condensation. Either the air cools to its air temperature or it gets so dissolves in water that it is no longer hold any more water, which leads to condensation. Dry Point

Condensation happens when warm air bumps into cold surfaces or when your environment is very humid. When this moist warm air strikes a chilly area, it swiftly cools down and sheds the water, which condenses into liquid on the chilly surface.

To know more about condensation visit:

https://brainly.com/question/1447093

#SPJ1

The Python data types that should be used for this data set are strings and integers.

'physics', 'chemistry',are the string data types in Python, 3011,3012 are the interger data types of python.A tuple would be the most appropriate data type for this data set because it is a collection of different data types that cannot be changed. Tuples use parentheses instead of square brackets, so the data set would be written as ('physics', 'chemistry', 3011, 3012).A tuple should be used for this data set because it allows the data to be stored in an immutable and easily accessible format. Tuples are also useful for storing items of different types, such as strings and integers, which is the case for this data set.

learn more about data types Refer:brainly.com/question/22574321

#SPJ4

The maximum equilibrium concentration of solute that can be achieved, the amount of solvent required to dissolve 1mol of solute, and the concentration of solute in a saturated solution.

A substance's solubility refers to its capacity to dissolve in a solvent. It refers to how much solute may dissolve in a specific amount of solvent at a specific temperature. The highest possible equilibrium concentration of a solute is determined by its solubility. The amount of solute that may dissolve in a certain amount of solvent at a particular temperature is represented by this number. The solubility product is the quantity of solvent needed to dissolve 1 g of solute. This is the volume of solvent needed to dissolve a specific substance.

To learn more about solubility

brainly.com/question/28301244

#SPJ4

The minimum concentration of dissolved oxygen required for a complete degradation of the organic matter in this water body is 4.30 mg/L.

To determine the minimum concentration of dissolved oxygen in the water body, we need to consider the stoichiometry of the reaction between the organic matter (CH2O) and oxygen (O2) to form carbon dioxide (CO2) and water (H2O):

CH2O + O2 → CO2 + H2O

The stoichiometric ratio between CH2O and O2 is 1:1, meaning that one molecule of CH2O reacts with one molecule of O2. Therefore, the minimum concentration of dissolved oxygen in the water body can be calculated as follows:

O2 (mg/L) = CH2O (mg/L) = 4.30 mg/L

So, the minimum concentration of dissolved oxygen required for a complete degradation of the organic matter in this water body is 4.30 mg/L.

Learn more about concentration here

https://brainly.com/question/10725862

#SPJ4

Answer:

To find the number of moles of hydrogen produced from 10.0 moles of aluminum, you need to balance the equation for the reaction between aluminum and sulfuric acid.

Step 1: Balance the equation:

2Al + 3H2SO4 --> Al2(SO4)3+3H2

Step 2: Determine the stoichiometric ratio of moles of hydrogen produced per mole of aluminum:

From the balanced equation, 3 moles of hydrogen are produced for every 2 moles of aluminum.

Step 3: Calculate the number of moles of hydrogen produced:

If you start with 10.0 moles of aluminum, then the number of moles of hydrogen produced would be 3 * (10.0 moles of Al / 2 moles of Al) = 15 moles of hydrogen.

The gradual color change observed when the sodium thiosulfate ([tex]Na_{2}S_{2}O_{3}[/tex]) crystal was added to the aqueous solution of KI/[tex]I_{2}[/tex] in Station C evidence of a chemical change.

Let's mix а solution of sodium thiosulfаte, [tex]Na_{2}S_{2}O_{3}[/tex], with iodine, [tex]I_{2}[/tex], dissolved in аqueous potаssium iodide, KI. The mixture of iodine аnd potаssium iodide mаkes potаssium triiodide. [tex]KI_{3}[/tex]. We will put the triiodide solution in the empty beаker аnd аdd some sodium thiosulfаte.

A balanced equation for the oxidation-reduction reaction between sodium thiosulfate and potassium triiodide:

[tex]S_{2}O_{3} ^{2-} + I_{2}\neq S_{4} O_{6} ^{2-} +I^{-}[/tex]

Thus, this equation shows evidence of a chemical change.

For more information about chemical changes refers to the link:

https://brainly.com/question/23693316

#SPJ4

The molar enthalpy of the reaction for the combustion of C6H6 is 3146.87 kJ/mol.

To calculate the molar enthalpy of the reaction, we need to find the amount of heat produced per mole of C6H6.

First, find the moles of C6H6: n = m/M where,

n = 300g / 78.11g/mol

= 3.84 moles

Next, divide the heat produced (12050 kJ) by the number of moles:

ΔH = q/n where,

ΔH = 12050 kJ / 3.84 moles = 3146.87 kJ/mol

So, The molar enthalpy of the reaction for the combustion of C6H6 is 3146.87 kJ/mol.

Learn more about molar enthalpy here:

https://brainly.com/question/29295293

#SPJ4

"In a process where 50% acetic acid solution could accidentally come in contact with ethylene glycol, hazards that should be given carful consideration including the possibility of polymerization, heat generation and pressure build-up". The given statement is true.

The reaction of an alcohol (ethylene glycol) with an acid (acetic acid) in the presence of conc. H₂SO₄ to form an ester is called an esterification reaction. Ethyl acetate is formed from the reaction of Ethyl alcohol and Acetic acid in the presence of conc. H₂SO₄.

This process can be hazardous if safety measures are not taken as a lot of heat is generated throughout the process and there is a possibility of polymerization.

Lear more about esterification reaction from the link given below.

https://brainly.com/question/16010744

#SPJ4

The following statements correctly describes chemical equation : Bonds between atoms break and reform.

Chemical reaction refers to the rearrangement of atoms and their bonds in reactants to yield new substances which are known as products.

Reactants go into reaction and products are yielded from reaction. Reaction require energy which is called endothermic reaction or it may release energy which is known as exothermic reaction.

Chemical equation tells us about the substances involved in reaction and chemical equation informs us about the symbols and formulae of substances involved in reaction. Chemical equation tells us about the atoms or molecules of reactants and products in reaction.

To know more about chemical reaction, refer

https://brainly.com/question/11231920

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: Which statement correctly describes a chemical reaction?

Reactants come out of a reaction.

Energy is always released.

Bonds between atoms break and reform.

Products go into a reaction.

Faraday is a unit of electric charge, not a substance. It is equivalent to the charge on one mole of electrons, which is approximately 96,485 coulombs. Therefore, the number of moles in a certain amount of Faraday is not applicable as it is a unit of charge, not of substance.

Faraday is a unit of electric charge named after the British scientist Michael Faraday. It is defined as the amount of electric charge that is transported by a steady current of one ampere in one second. The Faraday is equivalent to the charge on Avogadro's number of electrons, approximately 6.022 x 10^23 electrons. The Faraday is often used in electrochemistry to express the magnitude of electric charge involved in chemical reactions. For example, in the electrolysis of water, the number of Faradays of charge required to produce a certain amount of hydrogen or oxygen is often measured.

Learn more about faraday in brainly.com/question/1640558

#SPJ1

By adding the specified compounds to 18 liters of deionized water, the chemical analysis of the resulting simulated groundwater would show the following concentrations:

Chemical analysis is a process of determining the chemical composition of a given sample. It can be used to identify the presence of particular elements and compounds, as well as to measure the concentrations of those components. Chemical analysis is typically done through a variety of techniques, such as spectroscopy, chromatography, and mass spectrometry.

Learn more about the chemical analysis

https://brainly.com/question/29412706

#SPJ4

Good work on the hand-drawn graph. Wheat plant height vs. height is the title of your graph.

Data values are graphically represented in data plots, such as columns, lines, regions, and pie slices in a chart. Instead of wasting time on complicated tabular representations, it enables you to quickly draw an output from the data. Scientific data are typically plotted to highlight correlations between variables or to visualize variance, however not all data sets call for a plot. If there are just one or two points, it is simple to look at the data directly and there is little to no benefit from plotting them on a graph.

Wheat 1 data plots

(1,3) ,(2,2.9) ,(3,5) ,(4,6) ,(5,7) ,(6,8) ,(7,9) ,(8,10)

Wheat 2 data plots

(1,3) ,(2,3) ,(3,5) ,(4,6) ,(5,7) ,(6,8) ,(7,10) ,(8,10)

Wheat 3 data plots

(1,0) ,(2,2) ,(3,3) ,(4,4) ,(5,5) ,(6,7) ,(7,7) ,(8,7)

Learn more about scientific data from here:

https://brainly.com/question/11645316

#SPJ4

The strength of a Lewis base is determined by its electron-donating ability, which is influenced by the electronegativity of the atoms it contains.

The electronegativity of an atom determines how strongly it attracts electrons towards itself. Phosphorus has a lower electronegativity than nitrogen, and fluorine has a higher electronegativity than hydrogen.

As a result, the electrons in a P-F bond are more strongly held by the fluorine atoms, making phosphorus trifluoride (PF₃) a weaker Lewis base than phosphine (PH₃).

Similarly, the electrons in an N-F bond are more strongly held by the fluorine atoms, making nitrogen trifluoride (NF₃) a weaker Lewis base than ammonia (NH₃). In short, the higher the electronegativity of the atoms in a molecule, the stronger its Lewis acidic character, and the weaker its Lewis basic character.

To learn more about Lewis base visit: https://brainly.com/question/3655338

#SPJ4

A sample of 0.53 g of carbon dioxide will be obtained by heating 1.31 g of calcium carbonate. The percent yield for this reaction will be 92%.

1CaCO₃(s) → 1Cao(s) + 1CO₂(g)

1.31 g                                  ?

% yield will be = actual yield / theoretical yield × 100

actual yield will be 0.53 gram and theoretical yield will be 0.576 gram

CaCO₃ will be 1.31 gram

1.31 gram of CaCO₃ → moles of CaCO₃ → moles of CO₂ → grams

1.31 g CaCO₃ × 1 mol CaCO₃ / 100.09 g CaCO₃ × 1 mole CO₂ / 1 mole CaCO₃ × 44.01g CO₂ / 1 mole CO₂ = 0.576 g of CO₂

% yield = 0.53 / 0.576 × 100

% yield = 92%

To know more about theoretical yield here

https://brainly.com/question/14966377

#SPJ4

The percent increase in density would be 10%.

For an ideal gas, the relationship between pressure and volume is described by the equation of state: PV = nRT, where

When a gas is compressed isothermally, its temperature remains constant. Therefore, the equation of state can be rearranged as:

V/n = RT/P

From this equation, we can see that the ratio of volume to number of moles is proportional to the inverse of pressure. Therefore, if the pressure of the gas is increased by a certain percentage, the volume per mole of gas will decrease by the same percentage, and the density (mass per unit volume) will increase by the same percentage.

So, the percent increase in density would be 10%.

Learn more about ideal gas here:

https://brainly.com/question/27870704

#SPJ4

Answer:

Explanation:

"No", Limiting how much companies can charge will distort markets, they argue, causing shortages and exacerbating supply chain problems while only temporarily reducing inflation.

The freezing point of the aqueous solution formed with 0.8100 m FeCl₃ is -5.67624 °C.

To find the freezing point of an aqueous solution, it is required to use the equation:

ΔT = [tex]\rm K_f[/tex] × m × i

In which:

ΔT = freezing point depression,

[tex]\rm K_f[/tex] = the freezing point depression constant for water

m = molality of the solute

i =  van't Hoff factor.

The van't Hoff factor (i) for FeCl₃ in this situation is 3.400, and you're asked to determine the freezing point depression (T) of an aqueous₃ solution with a molality (m) of 0.8100 m.

First, find the freezing point depression:

ΔT = [tex]\rm K_f[/tex] × m × i

ΔT = 1.860 °C/m × 0.8100 m × 3.400

Now, place the values and find:

ΔT = 1.860 °C/m × 0.8100 m × 3.400

ΔT= 5.67624 °C

The freezing point depression is 5.67624 °C.

To calculate the freezing point of the solution, it is required to minus the freezing point depression from the freezing point of pure water (0 °C):

Freezing point = 0 °C - ΔT

= 0 °C - 5.67624 °C

= -5.67624 °C

Thus, the freezing point is -5.67624 °C.

Learn more about freezing point, here:

https://brainly.com/question/30838457

#SPJ6

D20 exchange is a method used to determine the presence of certain protons in a molecule.

It involves exchanging a deuterium (D) nucleus for a hydrogen (H) nucleus in the molecule. By measuring the amount of exchange that occurs, it is possible to determine which protons are present and how strongly they are bound.

The formula for D20 exchange is:

[D]/[H] = k1/k2

Where [D] is the concentration of deuterium in the molecule, [H] is the concentration of hydrogen in the molecule, and k1 and k2 are the rate constants of the exchange reaction.

In this case, the presence of OH and NH2 protons is confirmed by D20 exchange, since both of these protons are known to exchange deuterium nuclei. CH protons, on the other hand, do not exchange deuterium nuclei, so their presence cannot be confirmed by this method. The exchange rate for OH and NH2 protons is generally much higher than that of CH protons, which makes them easier to detect.

Learn more about deuterium nuclei here:

https://brainly.com/question/28391983

#SPJ4

5.14m/s ...............................................

It is favorable rather than the many oil to form the one large oil droplet droplets in an aqueous solution , the correct option is A) because there is less ordered water with large oil droplets, so higher entropy overall.

The entropy is the measure of the randomness or the disorder in the solution. The entropy increases the randomness increases and when the entropy decreases the arrangement will be the more ordered.

Thus, Because of the less ordered water with large oil droplets, so higher entropy overall in the energetically favorable rather than the many oil to form the one large oil droplet droplets that is protein monomers in that is protein complex in an aqueous solution.

To learn more about entropy here

https://brainly.com/question/13999732

#SPJ4

Based on the Laws of Thermodynamics, when a beaker of isobutyl alcohol is put inside a sealed tank containing isobutyl alcohol gas at 103.

Degree c and 619. torr, the pressure inside the tank will be higher than the pressure in the beaker, causing some of the liquid to evaporate and increase the liquid volume in the beaker. Therefore, after ten minutes, there will be more liquid in the beaker than before.

When a beaker of isobutyl alcohol is put inside a sealed tank containing isobutyl alcohol gas at 103°C and 619 torr, the molecules of isobutyl alcohol gas in the tank will be more energetic due to the increased temperature. As a result, they will move faster and collide with each other more frequently, raising the pressure inside the tank. The higher pressure in the tank will push molecules of isobutyl alcohol gas into the beaker, where they will condense into liquid due to the decrease in pressure.

Learn more  the Laws of Thermodynamics:

https://brainly.com/question/26035962

#SPJ4

It goes as follows: Zn(NO₃)² + NaCl = ZnCl₂ + NaNO₃. Double displacement reaction is the name given to this kind of reaction.

In a double displacement reaction, two chemicals react and the affirmative (cation) and negative (anion) ions of the two reactants switch positions, creating two new compounds or outputs.

Although technically the bonds created between the different molecules may be either ionic or covalent in nature, the reactions most commonly occurs between ionic compounds. Double ejection processes also involve foundations or acids.

To know more about reaction visit :-

https://brainly.com/question/28984750

#SPJ1

Answer:

As you go up the fractionating column, the hydrocarbons have: lower boiling points lower viscosity (they flow more easily) higher flammability (they ignite more easily) This means that in general hydrocarbons with small molecules make better fuels than hydrocarbons with large molecules.

Ceramics and metals have different mechanical properties, including size dependence of strength. In ceramics, the strength is dependent on the size due to their brittle nature and the presence of microcracks. In metals, however, the strength is not size dependent due to their ductile nature and the ability to deform plastically without breaking.

In ceramics, small objects can have a higher strength than larger ones because small ceramics are less likely to have cracks or flaws, which can weaken the material. The size-dependent strength in ceramics arises from the high surface-to-volume ratio of small objects, which means that more stress is applied to the surface and any cracks or flaws present are more likely to cause failure.

In contrast, metals have a lower surface-to-volume ratio, so the stress is distributed more evenly. Additionally, metals can deform plastically under stress, which helps to distribute the stress and reduce the likelihood of fracture. This is why the strength of metals is not size dependent.

To learn more about metals visit here:

https://brainly.com/question/29404080

#SPJ11

The hume-rotthery rule is a set of guidelines for substitutional solid solutions to be viable and  interstitial solid solutions to be viable. The correct answer is B and C.

The basic guidelines known as the Hume-Rothery rules, which bear William Hume-name, Rothery's outline the circumstances in which an element might dissolve in a metal and create a solid solution. The rules are divided into two categories: interstitial solid solutions and substitutional solid solutions.

The following are the Hume-Rothery rules for solid substitutional solutions:

Learn more about Hume-Rothery Rules at https://brainly.com/question/17173430

#SPJ4