Which of the following are least likely to form a fully
crystalline solid when solidified?
a. Metals
b. Polymers
c. Ceramics
d. All equally likely

The percent concentration of the final mixture is 78.47%.

We can use the following formula to solve the given question:

Initial concentration × initial volume = final concentration × final volume

We can represent the initial volume of first and second batch as 210 L and 184 L respectively. Also, the concentration of first and second batch are 94.80% and 66.80% respectively.

Let's assume x as the percent concentration of the final mixture. Therefore, the final volume would be the sum of the initial volume of first and second batch, i.e. 210 L + 184 L = 394 L.

Now, we can use the formula to get the final concentration.

Applying the formula for isopropanol, we get:

(94.80%)(210) + (66.80%)(184) = x(394)

We can simplify the equation and solve for x:

x = (94.80%)(210) + (66.80%)(184) ÷ 394 = 78.47%

Therefore, the percent concentration of the final mixture is 78.47%.

Learn more about isopropanol here:

https://brainly.com/question/1435674

#SPJ11

Theoretical yield of the reaction: [Provide the numerical value and unit]

In order to calculate the theoretical yield of the reaction, we need to consider the balanced chemical equation and the limiting reagent.

The balanced chemical equation shows the stoichiometric relationship between the reactants and products. From the equation, we can determine the molar ratio between the reactants and products.

Next, we need to identify the limiting reagent, which is the reactant that is completely consumed and determines the maximum amount of product that can be formed. In this case, the limiting reagent is N gas because it is present in excess, while A is the reactant that is consumed completely.

To calculate the theoretical yield, we first convert the given amount of the limiting reagent (N gas) to moles using its molar mass. Then, we use the stoichiometry of the balanced equation to determine the moles of product (A) that can be formed. Finally, we convert the moles of product to grams using the molar mass of A to obtain the theoretical yield.

[Provide numerical calculations and unit conversions]

Learn more about Theoretical yield

brainly.com/question/32891220

#SPJ11

1. Filtration: During the recrystallization process, the material is filtered to separate it from impurities. Some material may be lost during filtration due to imperfect filtration or loss on filter paper.
2. Solvent evaporation: After filtration, the solvent is evaporated to obtain the purified material.

3. Transfer losses: During the transfer of the material from one container to another, some material can get stuck to the sides of the container or be left behind due to improper handling.
4. Sample handling errors: Lastly, errors in handling the material during the recrystallization process, such as spillage or incorrect weighing, can lead to the loss of the material.

For question 13:
a. Since the compound is equally soluble in methanol, water, methylene chloride, and acetone, any of these solvents can be used for recrystallization. The choice of solvent would depend on other factors such as the boiling point, toxicity, availability, and cost. Without additional information, it is not possible to determine which solvent is the most appropriate.

TO know more about that recrystallization visit:

https://brainly.com/question/32928097

#SPJ11

The following acid-base equilibrium, H₂O + NH₃ ⇌ OH⁻ + NH₄⁺, goes forward in the direction of the product (OH- and NH4+) as NH3 is a weak base and it is protonated by H2O, which acts as an acid. It results in the formation of NH₄⁺ and OH⁻ ions.

In this reaction, H₂O behaves as an acid as it donates a proton (H⁺) to NH₃, which behaves as a base by accepting a proton. The presence of a weak base, NH₃, promotes the forward direction of the equilibrium.

However, when a strong base is added, such as NaOH, which also produces OH⁻, the equilibrium shifts in the backward direction. This occurs because adding more OH⁻ will counteract the forward shift of the equilibrium and increase the concentration of H₂O and NH₃, the reactants.

This leads to the formation of more H₂O and NH₃, causing a shift to the left, i.e., the reactant side. The addition of a strong acid, such as HCl, will push the equilibrium towards the formation of the products, OH⁻ and NH₄⁺, as it would increase the concentration of H₂O by protonating the NH₃ to NH₄⁺.

This will result in the formation of more OH⁻ ions, shifting the equilibrium towards the products. In conclusion, the addition of a weak base would promote the forward direction of the reaction, while adding a strong base would shift the equilibrium in the backward direction. The addition of a strong acid would push the equilibrium forward in the direction of the products.

To know more about acid refer here:

https://brainly.com/question/31434755#

#SPJ11

Sulphuric acid is considered a strong acid. An acid that ionizes completely or almost completely in water is known as a strong acid. Sulfuric acid is classified as a strong acid since it has a dissociation constant of greater than 1. Option c. is correct.

The dissociation of H2SO4 in water can be expressed in the following equation:H2SO4 + H2O ⇌ HSO4– + H3O+

Sulfuric acid is a strong acid because it ionizes completely when it is dissolved in water to produce H+ ions. As a result, it is an excellent proton donor, and its strength as an acid is determined by its ability to donate protons in a given medium. Sulfuric acid is a clear, colorless, and odorless liquid that is extremely corrosive and can cause burns. Option c. is correct.

To know more about dissociation visit-

https://brainly.com/question/32501023

#SPJ11

The two elements in the third row of the periodic table that have 2 unpaired electrons are aluminum (Al) and phosphorus (P). The orbital diagrams for the 3s and 3p orbitals can be used to justify this answer.

The 3s orbital can hold a maximum of 2 electrons. In the case of aluminum, the electron configuration is 1s² 2s² 2p⁶ 3s². This means that the 3s orbital in aluminum is fully filled with 2 electrons. The 3p orbitals, on the other hand, can hold a maximum of 6 electrons. In the case of phosphorus, the electron configuration is 1s² 2s² 2p⁶ 3s² 3p³. This means that the 3s orbital in phosphorus is fully filled with 2 electrons, and there are 3 unpaired electrons in the 3p orbitals.

Learn more about electrons here:

https://brainly.com/question/12001116

#SPJ11

The work of mechanically reversible, isothermal compression of 1 mol of isopropanol varol from 1 bar to 25 bar at

200°C is -1.24 × 10⁴ J.

Second virial coefficient, B = -3.88 × 10⁻⁴ m³/mol

Third virial coefficient, C = -2.6 × 10⁻⁸ m⁶/mol²

Temperature, T = 200 °C = 200 + 273.15 = 473.15 K

Initial pressure,

P₁ = 1 bar

Final pressure, P₂ = 25 bar

To calculate the work of mechanically reversible, isothermal compression of 1 mol of isopropanol varol from 1 bar to 25 bar at 200°C, we can use the equation for work of isothermal reversible process.

The work of isothermal reversible process can be given as:

W = - nRT ln (P₂/P₁)

Here, n = 1 mol (number of moles)

R = 8.314 J/mol·K (universal gas constant)

T = 473.15 K (temperature)

P₁ = 1 bar (initial pressure)

P₂ = 25 bar (final pressure)

We need to convert the pressure from bar to Pa.

1 bar = 10⁵ Pa

P₁ = 1 bar

= 10⁵ Pa

P₂ = 25 bar

= 25 × 10⁵ Pa

Substituting the given values in the equation of work, we get:

W = - nRT ln (P₂/P₁)W

= - (1 mol) × (8.314 J/mol·K) × (473.15 K) × ln (25 × 10⁵ Pa/10⁵ P

a)W = - (1 mol) × (8.314 J/mol·K) × (473.15 K) × ln 25

W = - (1 mol) × (8.314 J/mol·K) × (473.15 K) × 3.2188758248682

W = - 1.24 × 10⁴ J (final answer)

To know more about isothermal, visit:

https://brainly.com/question/33543625

#SPJ11

The electron configuration [kr]4d10 represents the atomic configuration of the element, which has 36 electrons in total. It is specifically the configuration of the noble gas krypton, which has the atomic number of 36.

The electron configuration of an atom is the number of electrons that it has in its orbitals. Orbitals are the areas around the atom's nucleus where electrons are most likely to be found. There are a variety of different orbitals, with varying energy levels and subshells. The electron configuration of an element is a concise way to represent its electronic configuration and to predict its chemical behavior.

In the case of the electron configuration [kr]4d10, the first part, [kr], indicates the configuration of the noble gas krypton, which has 36 electrons and a full outer shell. The second part, 4d10, indicates that there are 10 electrons in the d subshell of the fourth energy level. This configuration is specifically associated with the element with an atomic number of 46.

To know more about atomic visit-

https://brainly.com/question/1566330

#SPJ11

The rate law of the reaction for the decomposition of nitrous oxide can be written as: rate = k [N2O]^0, where [N2O] represents the concentration of nitrous oxide and k is the rate constant.

the rate constant, we need to use the given information that the half-life of nitrous oxide is 114 years. In a zero-order reaction, the half-life is given by the equation t1/2 = (0.693/k), where k is the rate constant. Plugging in the values, we have:

the amount of nitrous oxide that has decomposed from the initial concentration of 19.0M. Since the reaction is zero-order, the rate of decomposition is constant, and we can use the rate constant (k) to calculate the amount of nitrous oxide remaining.

TO know more about that decomposition visit:

https://brainly.com/question/14843689

#SPJ11

The number of valence electrons for Al is 3, Sn is 4, and Br is 7.

Valence electrons are the electrons present in the outermost shell of an atom.

The number of valence electrons is the same as the group number for elements in the s and p blocks.

For elements in the d and f blocks, the number of valence electrons can be determined by their position on the periodic table.

In this question, we need to determine the number of valence electrons for the following four elements: Al, Sn, Br.
Part A: Al
Aluminum (Al) is a member of group 13 (also called group IIIA) of the periodic table, so it has three valence electrons.
Part B: Sn
Tin (Sn) is a member of group 14 (also called group IVA) of the periodic table, so it has four valence electrons.
Part C: Br
Bromine (Br) is a member of group 17 (also called group VIIA) of the periodic table, so it has seven valence electrons.

For more such questions on atom

https://brainly.com/question/6258301

#SPJ8

Transition metal ions do not have a noble gas configuration in their ground state.

Transition metals are elements that occupy the central portion of the periodic table, from groups 3 through 12. They have partially filled d orbitals and can form ions with different charges. Transition metal ions do not have a noble gas configuration in their ground state because they have an incomplete d-subshell, which can be filled or emptied to achieve stability.

Noble gases are the elements in group 18 of the periodic table, which have a complete outermost electron shell, or valence shell. The electronic configuration of noble gases is stable, and they have little tendency to lose or gain electrons. Therefore, other elements often attempt to achieve noble gas configuration by losing or gaining electrons to complete their valence shell. However, transition metal ions have unique electronic structures that do not follow this trend, making them an exception.

Learn more about Transition metal here:

https://brainly.com/question/30551806

#SPJ11

Monosaccharides and disaccharides dissolve in water because they have hydrophilic groups, which form hydrogen bonds with water molecules.

This allows the sugar molecules to be surrounded by water molecules, and therefore dissolve in water.Water is a polar solvent and therefore interacts well with other polar solutes. Hydrophilic groups found in both monosaccharides and disaccharides such as hydroxyl groups and carbonyl groups (C=O) are soluble in water, making these sugar molecules soluble in water.

Because the solubility of any substance is dependent on the polarity of the solvent and solute, it is the presence of the hydrophilic groups found in sugars that allows them to dissolve in water. This allows the sugar molecules to be surrounded by water molecules, and therefore dissolve in water.Water is a polar solvent and therefore interacts well with other polar solutes.

To know more about Monosaccharides visit :

https://brainly.com/question/29679417

#SPJ11

the amount of heat liberated (ΔH) in joules would be approximately 167.38 J.

To calculate the amount of heat liberated (ΔH) in joules in the given reaction, we need to use the stoichiometry of the reaction and the given conditions. The equation given is:

Ca + 2 HCl -> CaCl2 + H2

From the stoichiometry of the reaction, we know that 1 mole of calcium (Ca) reacts with 2 moles of hydrochloric acid (HCl) to produce 1 mole of calcium chloride (CaCl2) and 1 mole of hydrogen gas (H2).

Given:

- Moles of calcium (Ca) = 0.025 moles

- Moles of hydrochloric acid (HCl) = 0.050 moles (calculated previously)

From the stoichiometry, we can determine that the limiting reactant is calcium (Ca) because it is in a lower amount. Therefore, all 0.025 moles of calcium will react with 2 * 0.025 = 0.050 moles of hydrochloric acid.

Now, we need to calculate the heat released per mole of calcium (ΔHr m) using the given specific heat of water and density:

Density of water = 1.00 g/cm³ = 1000 g/L (since 1 cm³ = 1 mL = 1/1000 L)

Specific heat of water (Cp) = 4.18 J/(g·K)

We'll use the equation:

ΔH = q/n

Where:

q = heat released (in joules)

n = moles of calcium (Ca)

Now, let's calculate the heat liberated (ΔH) in joules:

ΔH = q/n = (Cp × mass × ΔT) / n

ΔT represents the change in temperature, but since the reaction is assumed to be performed under constant pressure, ΔT is not given and is not required for the calculation.

We can calculate mass as follows:

Mass of calcium (Ca) = moles × molar mass = 0.025 moles × molar mass of calcium

The molar mass of calcium (Ca) is 40.08 g/mol.

Substituting the given values:

Mass of calcium (Ca) = 0.025 moles × 40.08 g/mol

Now, we can calculate the heat liberated (ΔH):

ΔH = (Cp × mass × ΔT) / n

Since ΔT is not given, we can omit it from the equation:

ΔH = (Cp × mass) / n

Substituting the values:

ΔH = (4.18 J/(g·K) × (0.025 moles × 40.08 g/mol)) / 0.025 moles

Simplifying the expression:

ΔH = (4.18 J/(g·K) × 40.08 g) / 1

To know more about reaction visit:

brainly.com/question/30464598

#SPJ11

A gold crown was put in a water tank and the volume of water increased from 50.0 mL to 85.0 mL. The mass of the crown is 555 g.

The volume of water displaced by a gold crown can be used to determine its density and purity. Let us now utilize the following equation to solve this issue:Density = mass/volume. Since the crown's mass is 555 g and the volume of water displaced is 85.0 - 50.0 = 35.0 mL, its density can be calculated as: Density = mass/volume

= 555 g/35.0 mL

= 15.9 g/mL

This density value is different from the gold density of 19.3 g/mL. As a result, the crown is not made of pure gold. It's likely that the crown contains impurities or that it's made of a different metal altogether.

Mercury has a specific gravity of 13.6. Let us use the following formula to solve this problem:Specific gravity = density of the substance/density of water. We know that the density of water is 1 g/mL, and the specific gravity of mercury is 13.6. As a result, we can calculate the density of mercury as follows: Density of mercury = Specific gravity × density of water

= 13.6 × 1 g/mL

= 13.6 g/mL

We can use this density value to figure out how many milliliters of mercury have a mass of 0.65 kg. Let us utilize the following formula to accomplish this:Mass = density × volume Rearranging this equation,

we have:Volume = mass/density

Substituting the known values into the equation, we get:Volume = mass/density

= 650 g/13.6 g/mL

= 47.8 mL Therefore, 47.8 mL of mercury has a mass of 0.65 kg.

To know more about volume visit:

https://brainly.com/question/28058531

#SPJ11

In the provided activity, you are observing the effects of different solutions on the shape of red blood cells. Let's go through each effect and explanation:

Effect of isotonic solution on cell shape:

When an isotonic solution, such as 0.9% NaCl or 5% dextrose, is added to the edge of the coverslip, the red blood cells will not change their shape significantly. An isotonic solution has the same osmolality as the cell, meaning the concentration of solutes in the solution is similar to that inside the cell. As a result, there is no net movement of water across the cell membrane, and the cells maintain their original shape.

Effect of hypertonic solution on cell shape:

When a hypertonic solution, such as 25% NaCl, is added to the edge of the coverslip, the red blood cells will undergo a change in shape. A hypertonic solution has a higher osmolality than the cell, meaning the concentration of solutes in the solution is higher than that inside the cell. In this case, water will move out of the red blood cells through osmosis, from an area of lower osmolality (inside the cells) to an area of higher osmolality (the hypertonic solution). The loss of water causes the cells to shrink and become crenated or wrinkled.

To learn more about  cells

https://brainly.com/question/26122239

#SPJ11

The reaction end-point is determined by observing a specific indicator or physical change, while the limiting reagent is determined by comparing stoichiometric ratios of the reactants.

The reaction end-point is determined by monitoring a specific indicator or physical change, such as color change or completion of a chemical transformation.

The limiting reagent in electrophilic substitution is determined by comparing the stoichiometric ratios of bromine and the aromatic derivative, with the reactant present in lower quantity being the limiting reagent.

Learn more about physical change

brainly.com/question/28742279

#SPJ11

Oxidation is defined as the loss of electrons from a substance during a chemical reaction. In other words, when a species or atom undergoes oxidation, it loses electrons. The correct option is b.

Electrons are negatively charged particles that orbit around the nucleus of an atom.

During a chemical reaction, atoms can either gain or lose electrons.

When an atom loses electrons, its oxidation state increases, indicating that it has undergone oxidation.

In the context of redox reactions (reduction-oxidation reactions), oxidation and reduction always occur together.

While oxidation refers to the loss of electrons, reduction refers to the gain of electrons by another species involved in the reaction.

Thus, the correct option is b.

To know more about Oxidation, click here:

https://brainly.com/question/13182308

#SPJ4

the temperature of the gas sample at the new volume and pressure, we can use the combined gas law equation:(P1 * V1) / T1 = (P2 * V2) / T2

The temperature of the gas sample at the new volume and pressure must be approximately 416.78 K.To solve for the temperature, we can use the combined gas law equation,

which relates the initial and final conditions of pressure, volume, and temperature. By rearranging the equation and substituting the given values, we can find the temperature at the new volume and pressure. In this case, the temperature is approximately 416.78 K.

TO know more about that temperature visit:

https://brainly.com/question/11464844

#SPJ11

The wavelength of the emission line in the hydrogen spectrum caused by the electron transition from n=6 to n=4 is approximately 1.942 x 10^-6 meters. In the context of atomic physics, an electron transition refers to the movement of an electron from one energy level to another within an atom.


To calculate the wavelength of the emission line in the hydrogen spectrum caused by the transition of the electron from an orbital with n=6 to an orbital with n=4, we can use the Rydberg formula and the given values:

Rydberg constant (Ry) = 1.0973731568508 x 10^7 m^-1

Principal quantum number (n1) = 6

Principal quantum number (n2) = 4

The formula for calculating the wavelength (λ) is:

1/λ = Ry * (1/n1^2 - 1/n2^2)

Now, let's substitute the values into the formula:

1/λ = (1.0973731568508 x 10^7 m^-1) * (1/6^2 - 1/4^2)

Simplifying the equation:

1/λ = (1.0973731568508 x 10^7 m^-1) * (1/36 - 1/16)

1/λ = (1.0973731568508 x 10^7 m^-1) * (9/576 - 36/576)

1/λ = (1.0973731568508 x 10^7 m^-1) * (-27/576)

1/λ = - (1.0973731568508 x 10^7 m^-1) * (27/576)

1/λ = - 1.0973731568508 x 10^7 m^-1 * (27/576)

1/λ = - 1.0973731568508 x 10^7 m^-1 * 0.046875

1/λ = - 514687.5 m^-1

Now, let's calculate the wavelength (λ):

λ = 1 / (-514687.5 m^-1)

λ ≈ 1.942 x 10^-6 m (rounded to 3 significant digits)

Therefore, the wavelength of the emission line in the hydrogen spectrum caused by the electron transition from n=6 to n=4 is approximately 1.942 x 10^-6 meters.

To know more about Rydberg formula , click here, https://brainly.com/question/32613040

#SPJ11

A- Compound a is named 3,3-dimethyl-2-pentene, compound b is named 2-methyl-4-propylhexane, and compound c is named 3,5,5-trimethyl-2-hexene.

9a) Cyclohexene forms adipic acid with alkaline KMnO4 and 1,2-cyclohexanediol with hot acidic KMnO4.

9b) 1,2-dimethylcyclohexene forms a mixture of 2,5-dimethyl-2,5-hexanediol and 1,2-cyclohexanedicarboxylic acid with alkaline KMnO4 and 2,5-dimethyl-2,5-hexanediol with hot acidic KMnO4.

A)  To determine the IUPAC name, we start by identifying the longest continuous carbon chain, which in this case is a pentane (5 carbons). We number the carbon chain starting from the end closest to the first branch. In this case, we number from the left. The substituents attached to the main chain are then named as branches with their respective locants (numbers). The substituent groups attached to the carbon chain in this compound are methyl groups (-CH3) and an ethyl group (-CH2CH3). The locant for the ethyl group is 3 because it is attached to the third carbon. The final name is obtained by combining the names of the substituents and the parent chain.

b) The correct IUPAC name for [tex]CH3CH2CHC(CH3)CH2CH3[/tex] is 2-methyl-4-propylhexane.

The longest continuous carbon chain in this compound is a hexane (6 carbons). We number the carbon chain starting from the end closest to the first branch. In this case, we number from the left. The substituents attached to the main chain are then named as branches with their respective locants. The substituent groups attached to the carbon chain in this compound are a methyl group (-CH3) and a propyl group (-CH2CH2CH3). The locant for the methyl group is 2 because it is attached to the second carbon. The locant for the propyl group is 4 because it is attached to the fourth carbon. The final name is obtained by combining the names of the substituents and the parent chain.

c) The correct IUPAC name for [tex]CH3CHCHCH(CH3)CHCHCH(CH3)2[/tex] is 3,5,5-trimethyl-2-hexene.

: The longest continuous carbon chain in this compound is a hexene (6 carbons). We number the carbon chain starting from the end closest to the first branch. In this case, we number from the left. The substituents attached to the main chain are then named as branches with their respective locants. The substituent groups attached to the carbon chain in this compound are methyl groups (-CH3). The locants for the methyl groups are 3, 5, and 5 because they are attached to the third, fifth, and fifth carbons, respectively. The final name is obtained by combining the names of the substituents and the parent chain.

9. The products formed when the given compounds are reacted with alkaline KMnO4 and hot acidic KMnO4 are as follows:

a) Cyclohexene:

- Alkaline KMnO4: Cyclohexene is oxidized to form 1,6-hexanedioic acid (adipic acid).

- Hot acidic KMnO4: Cyclohexene is oxidized to form 1,2-cyclohexanediol.

b) 1,2-dimethylcyclohexene:

- Alkaline KMnO4: 1,2-dimethylcyclohexene is oxidized to form a mixture of 2,5-dimethyl-2,5-hexanediol and 1,2-cyclohexanedicarboxylic acid.

- Hot acidic KMnO4: 1,2-dimethylcyclohexene is oxidized to form 2,5-dimethyl-2,5-hexanediol.

learn more about IUPAC name here:

https://brainly.com/question/30086566

#SPJ11

MgCl2 is an ionic compound, meaning it is composed of Mg2+ and Cl- ions. Therefore, when it dissolves in water, it breaks apart into its component ions. Thus, the concentrations of MgCl2, Mg2+, and Cl- in a solution can be determined through stoichiometry.

Suppose 5 moles of MgCl2 are dissolved in water to make 100 liters of solution.

The molar concentration of MgCl2 would be (5 mol MgCl2) / (100 L solution) = 0.05 M MgCl2.

However, since MgCl2 dissociates into Mg2+ and Cl- ions, the concentrations of these individual ions must also be determined.

To find the concentration of Mg2+, use the stoichiometric ratio of 1 Mg2+ ion per 1 MgCl2 molecule:

0.05 M MgCl2 x (1 mol Mg2+ / 1 mol MgCl2) = 0.05 M Mg2+.

Similarly, the concentration of Cl- can be found using the stoichiometric ratio of 2 Cl- ions per 1 MgCl2 molecule:

0.05 M MgCl2 x (2 mol Cl- / 1 mol MgCl2) = 0.1 M Cl-.

Thus, the concentrations of MgCl2, Mg2+, and Cl- in this solution are 0.05 M, 0.05 M, and 0.1 M, respectively.

To know more about concentrations visit-

https://brainly.com/question/30862855

#SPJ11

We know that the heat equation is given by,`ρCpdT/dt = k(∂^2T/∂x^2)` where, `ρ` is the density of the material, `Cp` is the specific heat capacity of the material, `k` is the thermal conductivity, `T` is the temperature and `t` is time. Now we will find the homogeneous heat equation which corresponds to the given data.

(a) Given Thermal diffusivity = 0.72 cm^2/secWe know that `α = k/ρCp`.Rearranging the terms, we get `k = αρCp`.We have α = 0.72 cm^2/sec, Cp is not given and ρ is also not given. Hence, we cannot form the heat equation for this data.(b) Given Specific heat = 0.215 cal/g-°C, Density = 2.7 g/cm^3 and Thermal conductivity = 0.63 cal/cm-sec-°CWe know that `k = αρCp`.Rearranging the terms, we get `Cp = k/(ρα)`.

We have α = 0.72 cm^2/sec, k = 0.63 cal/cm-sec-°C and ρ = 2.7 g/cm^3. Hence, `Cp = 0.63/(2.7 × 0.72) = 0.105 cal/g-°C`.Therefore, the homogeneous heat equation for this data is `ρ × 0.105 × ∂T/∂t = 0.63 × (∂^2T/∂x^2)`.(c) Given Specific heat = 0.09 cal/g-°C, Density = 8.9 g/cm^3 and Thermal conductivity = 0.92 cal/cm-sec-°CWe know that `k = αρCp`.Rearranging the terms, we get `Cp = k/(ρα)`.We have α = 0.72 cm^2/sec, k = 0.92 cal/cm-sec-°C and ρ = 8.9 g/cm^3. Hence, `Cp = 0.92/(8.9 × 0.72) = 0.14 cal/g-°C`.

Therefore, the homogeneous heat equation for this data is `ρ × 0.14 × ∂T/∂t = 0.92 × (∂^2T/∂x^2)`.Hence, the heat equation (homogeneous) which corresponds to the given data are: For part (b), `ρ × 0.105 × ∂T/∂t = 0.63 × (∂^2T/∂x^2)`.For part (c), `ρ × 0.14 × ∂T/∂t = 0.92 × (∂^2T/∂x^2)`.

Learn more about heat equation at https://brainly.com/question/14691145

#SPJ11

The required grams of excess reactant remaining is 14.06 g.

The reaction is: Al2S3+3H2O→2Al(OH)3+3H2S

No of moles of Al2S3 = mass / molar mass

= 158 / (2 x 27 + 3 x 32)

= 1.17

No of moles of H2O = mass / molar mass = 131 / 18 = 7.28

As per the balanced reaction, 1 mole of Al2S3 reacts with 3 moles of H2O.So, the limiting reactant is H2O.

No of moles of H2S formed will be 3 times the no of moles of H2O used up.

Therefore, No of moles of H2S formed

= 3 x 7.28 = 21.84

Maximum no of moles of H2S formed is 21.84 moles.

Now, calculate the mass of H2S formed using the no of moles of H2S and molar mass of H2S.

Molar mass of H2S = 2 + 32 = 34 g/mol

Mass of H2S formed = no of moles x molar mass

= 21.84 x 34

= 742.56 g

The maximum mass of H2S formed is 742.56 grams.

The excess reactant is Al2S3.As per the balanced reaction, 1 mole of Al2S3 reacts with 3 moles of H2O.But in the given reaction, we have only 1.17 moles of Al2S3. Therefore, Al2S3 is in excess. So, we have to calculate the mass of H2O used up.1.17 moles of Al2S3 reacts with (1.17/3) moles of H2O.

No of moles of H2O used up = 1.17 / 3 = 0.39

Mass of H2O used up = no of moles x molar mass= 0.39 x 18 = 7.02 g Therefore, the mass of excess reactant = initial mass of Al2S3 - mass of Al2S3 reacted= 158 - (1.17 x 2 x 27) = 14.06 g.

To know more about moles visit:-

https://brainly.com/question/15209553

#SPJ11

To determine the percent conversion obtained in the hydrolysis of acetic anhydride, we need to use the given equation: X = 1 - (1 / (1 + kT))^n.

Given:

k = 0.158 min^(-1)

T = 25 °C (which is 25 + 273.15 = 298.15 K)

n = number of reactors in series = 4

Let's calculate the value of X using the equation:

X = 1 - (1 / (1 + kT))^n

= 1 - (1 / (1 + 0.158 * 298.15))^4

≈ 1 - (1 / (1 + 47.1717))^4

≈ 1 - (1 / 48.1717)^4

≈ 1 - (0.020759)^4

≈ 1 - 0.001437

≈ 0.998563

To convert this value to a percentage, we multiply by 100:

Percent Conversion = X * 100

≈ 0.998563 * 100

≈ 99.8563

Rounded to one decimal place, the percent conversion obtained is approximately 99.9%. Therefore, the closest option provided is:

a. 99.5

The given options in the question do not include the calculated result of 99.9%.

To learn more about  hydrolysis

https://brainly.com/question/30468294

#SPJ11

Chloroform is an organic compound with a chemical formula of CHCl3. Chlorine is the only halogen present in chloroform. To determine the mass percentage of chlorine in chloroform, we must first determine the molar mass of the compound and the molar mass of chlorine.

The molar mass of CHCl3 can be calculated as:1(12.01 g/mol) + 1(1.01 g/mol) + 3(35.45 g/mol) = 119.38 g/mol

The molar mass of chlorine is 35.45 g/mol.

The mass percentage of chlorine in chloroform can be calculated as:

mass of chlorine in CHCl3/mass of CHCl3 x 100%

The mass of chlorine in one mole of CHCl3 is 3(35.45 g/mol)

= 106.35 g/mol.

Thus, the mass percentage of chlorine in CHCl3 can be calculated as:(106.35 g/mol / 119.38 g/mol) x 100% = 89.03%

Therefore, the mass percentage of chlorine in chloroform is 89.03%.

To know more about chlorine visit-

https://brainly.com/question/19460448

#SPJ11

The molecule H-C-C-C-C-O-H contains a functional group known as an alcohol.

The alcohol functional group is characterized by the presence of an oxygen atom bonded to a carbon atom, which is then bonded to a hydrogen atom. In this molecule, the oxygen atom is bonded to the fourth carbon atom in the chain.

The general formula for an alcohol is R-OH, where R represents a carbon-based group. In the given molecule, the carbon chain represents the R group, and the -OH group indicates the presence of the alcohol functional group.

Alcohols are classified as a subcategory of organic compounds known as oxygen-containing functional groups. They are characterized by their ability to form hydrogen bonds due to the presence of the polar -OH group. This gives alcohols certain physical and chemical properties, such as higher boiling points and the ability to undergo various reactions.

In the molecule provided, the presence of the -OH group indicates that it is an alcohol. The specific name of this molecule would depend on the number and arrangement of carbon atoms in the chain. If we assume the carbon chain continues beyond what is shown, this molecule could be called pentanol, indicating a five-carbon chain with an alcohol functional group.

It's important to note that the molecular formula provided lacks specific information about the arrangement of the atoms in space. Without more information, it is difficult to determine the exact structure or stereochemistry of the molecule.

for more questions on functional group

https://brainly.com/question/696051

#SPJ8

To determine the pressure in a closed container, holding pure 3-methylpentane at 150°F, with both gas and liquid present, we can make use of the Cox Chart for isomers from the book.

What we can do is find the saturation pressure of 3-methylpentane at 150°F using the Cox Chart. This saturation pressure is the pressure at which the gas and liquid states are in equilibrium. Therefore, the pressure in the container should be equal to the saturation pressure of 3-methylpentane at 150°F.To find the saturation pressure of 3-methylpentane at 150°F on the Cox Chart, we can follow these steps:

Locate the point on the chart where the temperature line for 150°F intersects with the line for the 3-methylpentane isomer. This point should be in the area labeled "Saturated Liquid + Vapor".Draw a horizontal line from the point of intersection to the left side of the chart, where the pressure scale is located. Read off the saturation pressure of 3-methylpentane at 150°F from the pressure scale.

This should give a value of approximately 46 psia.

Therefore, the pressure in the container holding pure 3-methylpentane at 150°F with both gas and liquid present is approximately 46 psia.

To know more about methylpentane visit:

https://brainly.com/question/29740355

#SPJ11

Oxyfuel gas process is the most popular method used to cut metals. It involves burning oxygen and gas to melt the metal. The molten metal is then blown away by the compressed gas, resulting in a clean cut. The process is used on metals such as mild steel, cast iron, and wrought iron, to name a few.

Mild steel is the most popular type of metal cut with oxyfuel gas processes. The reason behind this is that it is the least expensive, making it perfect for low-cost jobs. The metal is also easy to weld, making it the go-to material for a wide range of construction applications. Cast iron is another type of metal that is commonly cut using oxyfuel gas processes. It is widely used in engine blocks, pipe fittings, and hydraulic equipment.

Finally, wrought iron is another type of metal that is commonly cut using oxyfuel gas processes. This metal is widely used in fences, gates, railings, and other ornamental structures. In conclusion, the oxyfuel gas process can cut a wide range of metals such as mild steel, cast iron, and wrought iron.

To know more about Oxyfuel visit-

https://brainly.com/question/32255908

#SPJ11

The colligative property, in general, is a physical characteristic of a solution that depends solely on the number of solute particles present and not on the identity of the solute. The freezing point depression (ΔTf) of a solution is one such property.

To begin, we'll need to calculate the number of moles of vitamin K in the solution; the formula we'll use to calculate the number of moles of vitamin K is moles of solute = molality × mass of solvent (in kg)From the question, we have;mass of vitamin K = 1.29 gmolecular weight of camphor

= 152 g/molmass of camphor

= 25.0 g

molar mass of vitamin K = ?

ΔTf = 4.31 ∘CThe Kf for camphor

= 40 ∘C/mKf = ΔTf/moles of solute × Kf

= 4.31 ∘C/  solution = 0.0001075 mol/gmass of solvent

= 25.0 gmoles of vitamin K = molality × mass of solvent (in kg)

= 0.0001075 × 25/1000

= 2.68 × 10^-6 mol

The molar mass of vitamin K can be calculated using the formula;Molar mass of vitamin K = Mass of vitamin K/ number of moles of vitamin K= 1.29 g/2.68 × 10^-6 mol≈ 4.81 × 10^5 g/molTherefore, the molar mass of vitamin K is 4.81 × 10^5 g/mol.

To know more about characteristic  visit:-

https://brainly.com/question/31760152

#SPJ11

To determine the amount of NH3 (ammonia) needed to make 1 gallon of DEF (diesel exhaust fuel), we need to consider the stoichiometry of the reaction and the molar masses of the compounds involved.

From the balanced equation:

2NH3 + CO2 → H2O + CH4N2O

We can see that 2 moles of NH3 react with 1 mole of CO2 to produce 1 mole of H2O and 1 mole of CH4N2O (urea).

To calculate the amount of NH3 needed, we can use the molar ratio between NH3 and CH4N2O (urea), which is 2:1.

1 mole of CH4N2O is equivalent to 2 moles of NH3.

Now, we need to convert the volume of DEF (1 gallon) into moles. To do this, we need to know the density of DEF. Let's assume the density of DEF is 1 g/mL.

1 gallon is equivalent to approximately 3.785 liters.

Now, we can calculate the mass of DEF:

Mass of DEF = Volume of DEF x Density of DEF

= 3.785 liters x 1000 g/liter

= 3785 grams

Next, we need to calculate the molar mass of CH4N2O (urea):

Molar mass of CH4N2O = 12.01 g/mol (C) + 4(1.01 g/mol) (H) + 2(14.01 g/mol) (N) + 16.00 g/mol (O)

= 60.06 g/mol

Finally, we can calculate the amount of NH3 (ammonia) needed:

Amount of NH3 = (2/1) x (Mass of DEF / Molar mass of CH4N2O)

= (2/1) x (3785 g / 60.06 g/mol)

= 5031.12 g

To convert the mass to pounds, we divide by the conversion factor:

Amount of NH3 (lbs) = 5031.12 g / 453.592 g/lb

≈ 11.09 lbs

Therefore, approximately 11.09 pounds of NH3 are needed to make 1 gallon of DEF.

To learn more about  stoichiometry

https://brainly.com/question/14935523

#SPJ11