Which of the following compounds will undergo bromination most rapidly using Br2, FeBr3?
A) p-methylacetanilide
B) bromobenzene
C) acetanilide
D) benzenesulfonic acid
E) dibromobenzene

The mass of 5.86 × 10²¹ atoms of arsenic is approximately 7.28 grams.

Avogadro's number (Nₐ) represents the number of atoms or molecules in one mole of a substance, and its value is approximately 6.022 × 10²³.

Given,

Molar mass of arsenic = 74.92 g/mol

Mass of one atom of arsenic = Molar mass / Avogadro's number

= 74.92 g/mol / (6.022 × 10²³ atoms/mol)

Mass of 5.86 × 10²¹ atoms of arsenic = (Mass of one atom of arsenic) × (5.86 × 10²¹ atoms)

Mass of one atom of arsenic = 74.92 g/mol / (6.022 × 10²³ atoms/mol)

= 1.244 × 10⁻²² g

Mass of 5.86 × 10²¹ atoms of arsenic = (1.244 × 10⁻²² g) × (5.86 × 10²¹ atoms) = 7.28 g

Learn more about mass, here:

https://brainly.com/question/20552052

#SPJ4

The equilibrium constant (Kc) of a reaction refers to the ratio of the concentrations of the products of the reaction to the concentrations of the reactants when the reaction has reached equilibrium. The expression for Kc depends on the balanced chemical equation and the stoichiometric coefficients of the species in the reaction.

The equilibrium constant for the reaction H2(g) + CO2(g) → H2O(g) + CO(g) is given by the following expression: Kc = [H2O][CO] / [H2][CO2] where the square brackets represent the molar concentrations of the species at equilibrium. The coefficients from the balanced equation are used as exponents for the concentrations.

The units of Kc depend on the stoichiometry of the reaction, as each species has its own unit of concentration (usually moles per liter or molarity).The value of the equilibrium constant for this reaction depends on the temperature at which the reaction is occurring. At a given temperature, the value of Kc is constant, but changing the temperature can cause Kc to change. If the reaction is exothermic, increasing the temperature will cause Kc to decrease, while decreasing the temperature will cause Kc to increase.

If the reaction is endothermic, the opposite is true.Kc is a measure of the extent to which a reaction goes to completion. A large value of Kc indicates that the products are favored at equilibrium, while a small value of Kc indicates that the reactants are favored. If Kc is equal to one, the reaction is at equilibrium and the concentrations of the products and reactants are equal. If Kc is greater than one, the products are favored, and if Kc is less than one, the reactants are favored.

In this case, the equilibrium constant expression indicates that the products are favored, as the numerator is larger than the denominator.

To know more about equilibrium constant visit:

https://brainly.com/question/28559466

#SPJ11

Sodium metal crystallizes in a body-centered cubic lattice with a unit cell edge of 4.29 Å.

We need to determine the radius (in Å) of a sodium atom. The correct option among the given options is (b) 3.22.

We know the formula of the volume of the unit cell in the bcc lattice, which is given byV = (πa³/6)The volume of the unit cell can also be expressed in terms of the radius of the atoms contained in it.

Therefore, we can say that

V = (4/3) πr³

For sodium metal, we can equate the above two expressions as:

V = (πa³/6) = (4/3) πr³

π gets cancelled on both sides of the equation above.

Therefore:

(a³/6) = (4/3) r³a = 4.29 Å

From the above expression, we can obtain the radius of the sodium atom,

r = (a/2)(3/4) = (4.29/2)(3/4) = 3.22 Å

Thus, the radius of the sodium atom is 3.22 Å. The correct option among the given options is (b) 3.22.

learn more about cubic lattice here

https://brainly.com/question/31116263

#SPJ11

Given data: Pressure of H2 (g) = 414.0 torr pressure of N2 (g) = 394.9 torr pressure of Ar (g) = 86.1 torrTo find:Mole fraction of each of the given gases :

Mole fraction of any gas can be calculated using the below formula:Xgas = moles of gas / total moles of gasLet's calculate the total pressure of the given gaseous mixture:Ptotal = PH2 + PN2 + PArPtotal = 414.0 torr + 394.9 torr + 86.1 torrPtotal = 895.0 torrThe mole fraction of each gas can be calculated using the formula:Xgas = moles of gas / total moles of gasMoles of H2 (g) = PH2 / Ptotal x total moles of gasMoles of H2 (g) = 414.0 torr / 895.0 torr x nMoles of H2 (g) = 0.463 moles of H2Moles of N2 (g) = PN2 / Ptotal x total moles of gas

Moles of N2 (g) = 394.9 torr / 895.0 torr x nMoles of N2 (g) = 0.441 moles of N2Moles of Ar (g) = PAr / Ptotal x total moles of gasMoles of Ar (g) = 86.1 torr / 895.0 torr x nMoles of Ar (g) = 0.096 moles of ArTherefore, the mole fraction of each of the given gases are as follows:Mole fraction of H2 = 0.463 / (0.463 + 0.441 + 0.096) = 0.412Mole fraction of N2 = 0.441 / (0.463 + 0.441 + 0.096) = 0.394Mole fraction of Ar = 0.096 / (0.463 + 0.441 + 0.096) = 0.194Main answer:Therefore, the mole fraction of each of the given gases are:Mole fraction of H2 (g) = 0.412Mole fraction of N2 (g) = 0.394Mole fraction of Ar (g) = 0.194

To know more about gases visit:

https://brainly.com/question/1369730

#SPJ11

The correct answer for balanced reaction is : Cr = 1, Cl2 = 3

To balance the redox reaction in basic solution, we need to ensure that the number of electrons gained and lost are equal and that the charges are balanced. Here is the balanced equation:

Cr(s) + 3Cl2(g) + 6OH-(aq) → Cr(OH)3(s) + 6Cl-(aq)

In this balanced equation, the coefficients in front of Cr and Cl2 are:

Cr = 1, Cl2 = 3

The balanced equation shows that 1 mole of Cr reacts with 3 moles of Cl2 to form 1 mole of Cr(OH)3 and 6 moles of Cl-. The coefficients are chosen to balance the charges and the number of atoms on both sides of the equation.

Therefore, the correct answer is:

Cr = 1, Cl2 = 3

for more questions on balanced
https://brainly.com/question/11904811
#SPJ8

One mole of any substance is defined as the amount of that substance containing Avogadro's number (6.0²² × 10²³) of particles (atoms, molecules, or ions).

The amount of substance in moles can be calculated by dividing the number of particles by Avogadro's number. Therefore, to calculate the number of moles of Cu in 1.51 × 10²² atoms of Cu, we need to divide 1.51 × 10²² by Avogadro's number. Here's the calculation: 1 mole of Cu contains 6.0²² × 10²³ atoms of Cu. Hence, 1.51 × 10²² atoms of Cu would contain (1.51 × 10²²)/ (6.0²² × 10²³) = 0.025 moles of Cu. Therefore, there are 0.025 moles of Cu present in 1.51 × 10²² atoms of Cu. The given number of atoms of Cu can be converted into the number of moles of Cu by using Avogadro's number. The number of atoms in one mole is defined as Avogadro's number which is 6.0²² × 10²³ atoms per mole.

Therefore, the number of moles of Cu present in 1.51 × 10²² atoms of Cu is: Number of moles of Cu = Number of atoms of Cu/Avogadro's number= 1.51 × 10²² /6.0²² × 10²³ = 0.0251 moles. Therefore, there are 0.0251 moles of Cu present in 1.51 × 10²² atoms of Cu.

To know more about Avogadro's number visit:-

https://brainly.com/question/28812626

#SPJ11

Part A: [OH-] = 0.17 M, [H3O+] = 0 M.

Part B: pH is undefined (or very high/basic), pOH ≈ 0.77.

Part A:

For a 0.17 M NaOH solution, we can determine the concentration of hydroxide ions ([OH-]) by considering the stoichiometry of the NaOH dissociation reaction, which is as follows:

NaOH → Na+ + OH-

Since NaOH is a strong base, it fully dissociates in water, producing one mole of hydroxide ions for every mole of NaOH.

Therefore, the concentration of [OH-] in the 0.17 M NaOH solution is 0.17 M.

As NaOH is a strong base, it completely reacts with water to produce hydroxide ions, resulting in negligible concentration of hydronium ions ([H3O+]).

Hence, the concentration of [H3O+] in the 0.17 M NaOH solution is essentially 0 M.

Part B:

The pH of a solution can be determined using the equation: pH = -log[H3O+]. Since [H3O+] is negligible in a 0.17 M NaOH solution, the pH is undefined or considered to be very high (basic).

The pOH of a solution can be calculated using the equation: pOH = -log[OH-]. In this case, the concentration of [OH-] is 0.17 M. Therefore, the pOH can be calculated as follows:

pOH = -log(0.17) ≈ 0.77

Note that since the solution is a strong base, the pOH value will be low (basic) and the pH value will be high (basic).

for more questions on pOH

https://brainly.com/question/3994941

#SPJ8

15 moles of O2 are required to generate 12 moles of SO2 gas. From the balanced chemical equation:

2CuFeS2 + 5O2 → 2Cu + 2FeO + 4SO2

We can see that for every 4 moles of SO2 produced, 5 moles of O2 are required. This is based on the stoichiometric coefficients of the reactants and products in the equation.

Therefore, if we want to generate 12 moles of SO2 gas, we need to determine how many moles of O2 are required.

Using a proportion:

4 moles of SO2 corresponds to 5 moles of O2

12 moles of SO2 corresponds to x moles of O2

We can set up the proportion:

4/5 = 12/x

Cross-multiplying:

4x = 5 * 12

4x = 60

Dividing both sides by 4:

x = 60/4

x = 15

So, 15 moles of O2 are required to generate 12 moles of SO2 gas.

To know more about stoichiometric:

https://brainly.com/question/32088573\

#SPJ4

The neutralization reactions for each given acid and base pair are:

HClO4(aq) + NaOH(aq) -> NaClO4(aq) + H2O(l)

2HBr(aq) + Ca(OH)2(aq) -> CaBr2(aq) + 2H2O(l)

a. The neutralization reaction between HClO4(aq) and NaOH(aq) can be represented as follows:

HClO4(aq) + NaOH(aq) -> NaClO4(aq) + H2O(l)

In this reaction, a base (NaOH) and an acid (HClO4) combine to form a salt (NaClO4) and water (H2O). The phases denoted are liquid water and aqueous solutions, respectively (aq and l).

b. The neutralization reaction between HBr(aq) and Ca(OH)2(aq) can be represented as follows:

2HBr(aq) + Ca(OH)2(aq) -> CaBr2(aq) + 2H2O(l)

Two molecules of the acid (HBr) and one molecule of the base (Ca(OH)2) interact in this reaction to form the salt (CaBr2) and two molecules of water (H2O). The phases denoted are liquid water and aqueous solutions, respectively (aq and l).

To learn more about neutralization, visit:

https://brainly.com/question/27745033

#SPJ11

The correct answer for the addition of 7.5 g + 2.26 g + 1.311 g + 2 g is 13.071 g.

To arrive at this answer, we add the given values together:

7.5 g + 2.26 g + 1.311 g + 2 g = 13.071 g.

In this case, all the values provided have three decimal places, so the sum is also expressed with three decimal places. Therefore, the correct answer is 13.071 g.It is important to maintain the same level of precision as the least precise value given in the problem, which in this case is 1.311 g. Rounding the answer to 13 g or 13.0 g would result in a loss of #SPJ8 and could lead to an inaccurate representation of the total mass.Therefore, 13.071 g is the correct answer because it accurately reflects the sum of the given values and maintains the appropriate level of precision.

for such more questions on addition

https://brainly.com/question/1433809

#SPJ8

a) The pH of the solution is 11.64 at 4.0 ml of added acid. b) The pH of the solution after adding 5.0 mL of acid beyond the equivalence point is 3.89.

a) The balanced chemical equation for the titration of CH₃NH₂CH₃NH₂ with HBr is given as follows: CH₃NH₂+HBr⟶ CH₃NH₃+Br⁻​

The initial concentration of CH₃NH₂CH₃NH₂ is 0.180 MM. Let the concentration of HBr be x. At equilibrium, the concentration of CH₃NH₃+ is equal to that of Br⁻.4.4×10⁻⁴​ ​=[CH₃NH₃⁺][OH⁻​][CH₃NH₂]​Since the solution contains a weak base and a strong acid, the pH of the solution will be less than 7. Thus, we will need to calculate the concentration of H+ at the equivalence point. Let us define x as the concentration of HBr.

x mol dm−3​H +CH₃NH₂CH₃NH₂ → CH₃NH₃ + H₂OH+initial 0.000000.1800change-x-x+x+xend(0.155-x)(0.180+x)(x)​[OH⁻]=4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂][OH⁻]=4.4×10⁻⁴​

​[CH₃NH₂CH₃NH₂][OH⁻]=[H⁺][OH⁻]Kw=1.0×10⁻¹⁴​

Kw=1.0×10−14[H⁺][OH⁻]=1.0×10¹⁴[H⁺][4.4×10⁻⁴​

​[CH₃NH₂CH₃NH₂]]=[1.0×10⁻¹⁴]4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂][H⁺]=1.0×10−14​/4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂][H⁺]=2.3×10⁻¹¹[OH⁻]=4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂]pOH=−log10​[OH⁻]pOH=−log10​(4.4×10⁻⁴​[CH₃NH₂CH₃NH₂])=2.36, pH=14−pOH

pH=14−2.36=11.64​

The pH of the solution is 11.64 at 4.0 mL of added acid.

b) The pH at one-half of the equivalence point can be calculated using the equation : pH=pKa+log10​([A−][HA])=4.4×10⁻⁴​​+log10​[(0.155/2)/0.180/2]pH=4.4×10⁻⁴​+log10​(0.4306)=3.51c) The pH at the equivalence point can be calculated as follows:

[OH⁻]=4.4×10⁻⁴​ ​[CH₃NH₂CH₃NH₂][H⁺][OH⁻]=[H⁺][OH⁻]=Kw=1.0×10⁻¹⁴[H⁺][OH−]=[1.0×10⁻¹⁴][4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂]]=[4.4×10⁻⁴​[CH₃NH₂CH₃NH₂]]/[H⁺][H⁺]=[4.4×10⁻⁴​[CH₃NH₂CH₃NH₂]]/[4.4×10⁻⁴[CH₃NH₂CH₃NH₂]]=1[H⁺]=1.0×10⁻⁷  pH=7.0

The pH at the equivalence point is 7.0.After adding 5.0 mL of acid beyond the equivalence point, the solution contains an excess of H⁺. We can use the following equation to calculate the pH:

pH=pKa+log10​([A⁻]/[HA])=4.4×10⁻⁴​+log10​[(0.155−0.115)/(0.180−0.115)]pH=4.4×10⁻⁴​+log10​(0.7722)=3.89

Thus, the pH of the solution after adding 5.0 mL of acid beyond the equivalence point is 3.89.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

The two factors determining the polarity of a molecule are electronegativity and molecular geometry.

Electronegativity is defined as the power of an atom to draw electrons towards itself. As a result, an atom with high electronegativity will hold the shared electrons closer to itself, resulting in the molecule being polar.Molecular geometry determines the polarity of a molecule.

A molecule's shape plays an important role in determining its polarity. For example, a molecule can have a polar bond, but if the polar bonds are evenly distributed, the molecule will be non-polar due to its symmetrical shape.

learn more about polarity here

https://brainly.com/question/17118815

#SPJ11

The characteristic of basic solutions among the given options is "Greater concentration of hydroxide ions than hydronium ions". The correct option is b.

In aqueous solutions, water molecules can dissociate into hydronium ions (H3O+) and hydroxide ions (OH-). In basic solutions, there is an excess of hydroxide ions compared to hydronium ions. This results in a higher concentration of OH- ions, contributing to the basic nature of the solution.

The concentration of hydroxide ions can be measured using the pOH scale, which is the negative logarithm of the hydroxide ion concentration.

In basic solutions, the pOH value is lower than the pH value, indicating a higher concentration of hydroxide ions compared to hydronium ions. As a result, the pH of basic solutions is greater than 7.

a. pH levels less than 7 at 25°C is incorrect as this describes acidic solutions, not basic solutions. Basic solutions have pH levels greater than 7, indicating their alkaline nature.

c. [H3O+] < [OH-]: This is incorrect for basic solutions. In basic solutions, the concentration of hydroxide ions (OH-) is greater than the concentration of hydronium ions (H3O+). Therefore, [OH-] is greater than [H3O+].

d. pH levels of 7 at 25°C: This describes neutral solutions, not basic solutions. Neutral solutions have a pH of 7, indicating an equal concentration of hydronium and hydroxide ions.

Therefore, the correct option is b.

To know more about basic solutions refer to the link :

https://brainly.com/question/29524438#

#SPJ11

As the speed of vibration of molecules increases, the property of temperature increases. Temperature is a measure of the average kinetic energy of the molecules in a substance.

When the speed of vibration of molecules increases, it means that the kinetic energy of the molecules has increased. This increase in kinetic energy results in an increase in temperature.

Temperature is related to the average speed of molecules in a substance. As the speed of vibration of molecules increases, the average speed of the molecules also increases. The kinetic energy of the molecules is directly proportional to their speed. Therefore, when the speed of vibration increases, the kinetic energy, and temperature of the substance also increase.

Furthermore, an increase in temperature affects other properties of a substance. For example, an increase in temperature can lead to an increase in the substance's energy content. This increase in energy can manifest as heat, which is the transfer of energy from a higher-temperature region to a lower-temperature region. So, when the speed of vibration of molecules increases, not only does the temperature increase but there can also be an increase in energy and the generation of heat.

Learn more about molecules here:

https://brainly.com/question/32298217

#SPJ11

The aqueous LIBr solution is formed by the dissolution of LIBr in water. The water molecules pull the ions present at the surface of the solid into solution, where the hydration process surrounds the separate ions with water molecules.

This process is described below:

LIBr is an ionic compound that is solid at room temperature. When LIB r is dissolved in water, it dissociates into its constituent ions, Li+ and Br-.

The Li+ and Br- ions are hydrated by water molecules as they enter the solution. The hydration process involves the surrounding of each ion with water molecules. The water molecules orient themselves around the ion in a specific manner, with the partially positive hydrogen atoms pointing towards the anion and the partially negative oxygen atoms pointing towards the cation.

This orientation is due to the partial charges present in the water molecule.

To know more about dissolution of LIBr refer to:

https://brainly.com/question/14233299

#SPJ11

The amount of the radioactive material reaction remaining after a certain period of time can be determined using the formula:Nt = N0(1/2)t/t₁/₂where:Nt = remaining amount of the radioactive material after the elapsed time, t.

N0 = the initial amount of the radioactive material, t₁/₂ = half-life period of the material. Therefore, the answer is 12.5 g (to three significant figures).

Given,Initial amount, N0 = 100.0 gHalf-life, t₁/₂ = 2.4 minutes Elapsed time, t = 7.2 minutesThe formula to calculate the remaining amount is:Nt = N0(1/2)t/t₁/₂Substituting the values:Nt = 100.0 g (1/2)^(7.2/2.4)Nt = 100.0 g (1/2)³Nt = 100.0 g (0.125)Nt = 12.5 gThe amount of Zn-71 remaining after 7.2 minutes has elapsed is 12.5 g.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

Sodium fluoride is a common ingredient in mouthwash. Its chemical formula is NaF. Sodium fluoride is a white crystalline powder with a bitter taste. It is soluble in water, and its solubility increases with temperature. Sodium fluoride is used in the production of toothpaste, mouthwash, and other dental products to prevent dental caries.

Sodium fluoride is added to toothpaste and mouthwash because it helps to reduce the risk of tooth decay. The chemical equation for sodium fluoride in mouthwash is as follows: NaF (s) + H2O (l) → Na+ (aq) + F- (aq) + H2O (l)Sodium fluoride is an ionic compound, meaning that it is composed of a positively charged ion (Na+) and a negatively charged ion (F-). When sodium fluoride is added to water, it dissolves and dissociates into its constituent ions, Na+ and F-.

These ions can then react with the teeth and prevent the formation of dental caries. The fluoride ion reacts with the calcium ions in the enamel of the teeth to form a more stable compound, calcium fluoride (CaF2). This process is called remineralization and helps to repair and strengthen the enamel of the teeth. In summary, the chemical equation for sodium fluoride in mouthwash is NaF (s) + H2O (l) → Na+ (aq) + F- (aq) + H2O (l). This equation shows how sodium fluoride dissolves in water to form its constituent ions, which then react with the teeth to prevent dental caries.

To know more about remineralization  visit

https://brainly.com/question/31852961

#SPJ11

The strongest acid is e. p-nitrobenzoic acid.

To determine the strongest acid among the given compounds, we need to consider the stability of the corresponding conjugate base. The stronger the acid, the more stable its conjugate base.

Let's analyze each compound:

a. m-methylbenzoic acid: The presence of an electron-donating methyl group (-CH₃) attached to the benzene ring stabilizes the conjugate base by dispersing the negative charge. Therefore, it is weaker than benzoic acid (with no substituents), making it a weaker acid.

b. m-methoxybenzoic acid: The methoxy group (-OCH₃) is also an electron-donating group, similar to the methyl group. It stabilizes the conjugate base, making it weaker than benzoic acid as well.

c. water: Water (H₂O) can act as an acid by donating a proton (H⁺), but compared to the carboxylic acids in the other options, water is a weaker acid.

d. p-bromobenzoic acid: The presence of a bromine atom (-Br) does not have a significant effect on the acidity compared to benzoic acid.

e. p-nitrobenzoic acid: The nitro group (-NO₂) is an electron-withdrawing group, which destabilizes the conjugate base by withdrawing electron density. This electron-withdrawing effect makes p-nitrobenzoic acid more acidic than the other options.

Therefore, among the given compounds, the strongest acid is e. p-nitrobenzoic acid.

Learn more about strongest acid at https://brainly.com/question/16616073

#SPJ11

Ksp solubility product constant for Ca3(AsO4)2 is 5.4×10−19. The given information is that the solubility of calcium arsenate (Ca3(AsO4)2) in water is 0.032 g/L. We are required to find the Ksp of the salt.

The equilibrium constant for the dissolution of sparingly soluble (insoluble) salts in an aqueous solution. The molar mass of Ca3(AsO4)2 is 398.078 g/mol. Calculate the solubility (in mol/L) of calcium arsenate using the given data as follows; Solubility of Ca3(AsO4)2 in water = 0.032 g/L Molar mass of Ca3(AsO4)2 = 398.078 g/mol. Number of moles = 0.032/398.078 = 8.04×10−5 mol/L.

The dissolution of Ca3(AsO4)2 (s) in water is given by the equation; Ca3(AsO4)2 (s) ⇌ 3Ca2+ (aq) + 2AsO42− (aq)The solubility product expression for Ca3(AsO4)2 is given as; Ksp = [Ca2+]3[AsO42−]2 The molar solubility (x) of Ca3(AsO4)2 is 8.04×10−5 mol/L.

To know more about Ca3 visit:

https://brainly.com/question/23847870

#SPJ11

Approximately 1.693 grams of calcium will be produced when 4.7 grams of calcium chloride are completely used up in the reaction.

To determine the grams of calcium produced, we need to calculate the molar ratio between calcium chloride (CaCl2) and calcium (Ca) in the balanced chemical equation for the reaction. The balanced equation is:

2Al + 3CaCl2 → 3Ca + 2AlCl3

From the balanced equation, we can see that for every 3 moles of calcium chloride, 3 moles of calcium are produced. We need to convert the given mass of calcium chloride (4.7 grams) to moles using its molar mass.The molar mass of CaCl2 is calculated by adding the atomic masses of calcium (Ca) and chlorine (Cl). The atomic mass of calcium is 40.08 g/mol, and the atomic mass of chlorine is 35.45 g/mol.

Molar mass of CaCl2 = (40.08 g/mol) + 2(35.45 g/mol) = 110.98 g/mol

Now we can calculate the moles of calcium chloride:

Moles of CaCl2 = (mass of CaCl2) / (molar mass of CaCl2)

              = 4.7 g / 110.98 g/mol

              ≈ 0.0423 mol

Since the molar ratio between calcium chloride and calcium is 3:3, the moles of calcium produced will be equal to the moles of calcium chloride used.

Moles of Ca = 0.0423 mol

To convert moles of calcium to grams, we multiply by the molar mass of calcium:

Mass of Ca = (moles of Ca) × (molar mass of Ca)

          = 0.0423 mol × 40.08 g/mol

          ≈ 1.693 g

for such more questions on reaction

https://brainly.com/question/24795637

#SPJ8

1. Sodium bicarbonate is added during the work-up phase because it helps in converting any residual acetic anhydride into acetic acid and neutralizes the unreacted salicylic acid.

Sodium bicarbonate is an effective pH neutralizer. In the preparation of aspirin, after the completion of the reaction, hydrochloric acid is added to lower the pH of the reaction mixture to about 2. At this point, aspirin precipitates as it is relatively insoluble in water. After filtration, the crude product is dissolved in hot water. At this stage, sodium bicarbonate is added to neutralize the acidic impurities like the acetic acid that is produced in the reaction. The impurities become soluble and easily removed from the solution.

2. The complete reaction mechanism for the preparation of aspirin is:

3. The crystals are washed with cold water during the first filtration to remove any impurities that may be present. Coldwater is used to prevent the solubility of aspirin in water. This makes it easier to remove any water-soluble impurities and unreacted salicylic acid that may be present.

4. The percent yield of the reaction is calculated by dividing the actual yield obtained by the theoretical yield that is calculated from the stoichiometry of the reactants involved in the reaction. Factors such as incomplete reactions, losses during filtration, and errors in measurement can all contribute to a lower yield. Therefore, the yield may be less than 100%.

5. The melting point of the newly synthesized aspirin should be around 136-140 °C if the reaction was successful. A lower melting point may be an indication of impurities in the final product. The impurities could be from an incomplete reaction, the presence of water or unreacted salicylic acid.

learn more about aspirin here

https://brainly.com/question/25794846

#SPJ11

Sulfur hexafluoride ([tex]SF_6[/tex]) and disulfur tetrafluoride ([tex]S_2F_4[/tex]) are both chemical compounds containing sulfur and fluorine, but they differ in their molecular structures and properties.

[tex]SF_6[/tex] is a colorless, odorless gas with a six-membered sulfur-fluorine ring, while [tex]S_2F_4[/tex] is a yellow solid with a four-membered sulfur-fluorine ring. [tex]SF_6[/tex] is highly stable and non-reactive, making it useful in electrical insulation and as a tracer gas in industrial processes. On the other hand, [tex]S_2F_4[/tex] is a highly reactive compound, easily decomposing and releasing toxic gases upon exposure to moisture or heat.

It is primarily used as a chemical intermediate in the synthesis of other fluorine-containing compounds. In summary, [tex]SF_6[/tex]is a stable gas with electrical insulating properties, while [tex]S_2F_4[/tex] is a reactive solid used in chemical synthesis.

Learn more about sulfur hexafluoride here:

https://brainly.com/question/8073966

#SPJ11

The volume of 0.25 M hydrochloric acid (HCl) solution that contains 0.15 mol HCl is 0.6 L.

A molarity is a concentration unit for a solution represented by mol/L. It is determined by dividing the moles of solute by the volume of the solution in liters. Therefore;0.25 M = 0.25 moles of HCl per L of solutionNow, let's assume the volume of the solution is V.

The number of moles of HCl in this volume of the solution would be the product of its molarity and volume. i.e.,0.25 V moles of HClWe also know that the number of moles of HCl is 0.15. Therefore;0.25 V = 0.15Solving for V;V = 0.15 / 0.25V = 0.6 LTherefore, the volume of 0.25 M hydrochloric acid (HCl) solution that contains 0.15 mol HCl is 0.6 L.

To know more about hydrochloric acid visit:

https://brainly.com/question/14519330

#SPJ11

The most common solvent for the mixtures in the body is water. The answer is option (a) solvent.

Solvent is a chemical substance capable of dissolving or dispersing one or more other chemical substances or solutes, resulting in a homogeneous solution. The solvent is the component that is present in the largest amount within a solution. Water is the most commonly used solvent in biological systems. Many compounds used in biological processes, including proteins and carbohydrates, are water-soluble. Solute: A solute is a substance that is dissolved in a solution. It is the component of a solution that is present in a lower amount than the solvent. Solute can be organic or inorganic compounds or ions.

Medium: It is the material or substance in which an enzyme acts, or a chemical reaction takes place. Colloid: It is a substance that contains small, evenly distributed particles that do not settle out. This term is commonly used to describe a type of mixture that includes particles that range in size from 1 to 1000 nanometers. Colloidal particles are large enough to scatter light and make the mixture appear cloudy.

To know more about solvent visit:-

https://brainly.com/question/30452436

#SPJ11

Neutral atoms of tin and germanium would be isoelectronic with Sn2 and Sn4 ions. The electron configuration shorthand notation of the neutral atoms is [Kr]5s²4d¹⁰5p².

Isoelectronic refers to two or more atoms or ions with the same number of electrons. Sn2 and Sn4 ions have 50 and 48 electrons respectively. Neutral atoms of tin and germanium have 50 and 32 electrons respectively which is equal to Sn2 ion. However, for the Sn4 ion, two electrons need to be removed, which makes the neutral tin atom isoelectronic with Sn4 ion.

The electronic configuration of Sn2+ ion is [Kr]4d¹⁰5s²5p⁰. The electronic configuration of Sn4+ ion is [Kr]4d¹⁰5s²5p⁰. The electronic configuration of a neutral tin atom is [Kr]5s²4d¹⁰5p². The electronic configuration of a neutral germanium atom is [Ar]3d¹⁰4s²4p².

To know more about atoms visit:

https://brainly.com/question/1566330

#SPJ11

Phenol has the chemical formula C6H5OH. It is a weak acid and when dissolved in water it undergoes an ionization reaction as shown below C6H5OH(aq) + H2O(l) ⇌ H3O+(aq) + C6H5O-(aq).

K a = \[\frac{[H_3O^+][C_6H_5O^-]}{[C_6H_5OH]}\]The Ka for phenol is given as 1.3 × 10−10.Let x be the degree of dissociation of phenol.The initial concentration of phenol is 0.56 M.The concentration of the undissociated phenol is (0.56 - x) M.The concentrations of the H3O+ and C6H5O− ions are each x M. Applying the weak acid equilibrium reaction and Ka expression, we have;Ka = \[\frac{[H_3O^+][C_6H_5O^-]}{[C_6H_5OH]}\]1.3 × 10−10 = \[\frac{x^2}{0.56 - x}\]Since x is very small compared to 0.56,

We can safely assume that 0.56 - x ≈ 0.56.So, 1.3 × 10−10 = x2/0.56x = √(1.3 × 10−10 × 0.56)x = 1.129 × 10−6The percent ionization of phenol is given by;Percent ionization = \[\frac{x}{[C_6H_5OH]}\]Percent ionization = \[\frac{1.129 \times 10^{-6}}{0.56} \times 100\% = 0.000202 \times 100\% = 0.0202\%\]Therefore, the percent ionization of phenol in a 0.56 m aqueous solution is 0.0202%.

To know more about chemical formula visit :

https://brainly.com/question/32018188

#SPJ11

The order of acidity can be determined by ranking the pH of each solution in increasing order. The solution with the lowest pH is the most acidic, while the solution with the highest pH is the least acidic.

The order of acidity can be determined by ranking the pH of each solution in increasing order. The solution with the lowest pH is the most acidic, while the solution with the highest pH is the least acidic. Here is the order of acidity for the given solutions:

Most acidic: [HCl] -0.15 M pH 0.00 [CH3COOH] -0.15 M pH 2.87 CH3COOH is an acidic solution. pH-7.45 is a neutral solution. Least acidic: CH3COO- is approximately 1.0% ionized at this concentration. The pH of a solution can be determined using the following formula: pH = -log[H+], where [H+] is the concentration of hydrogen ions in the solution.

To know more about pH visit: https://brainly.com/question/2288405

#SPJ11

The balanced equation of the reaction is 2Na + Cl2 ⟶ 2NaCl. It shows that 2 moles of sodium reacts with 1 mole of chlorine to form 2 moles of NaCl.

Therefore, the number of moles of Na required for the reaction can be calculated as shown below:Number of moles of NaCl = Mass/Molar massMolar mass of NaCl = 23 + 35.5 = 58.5 g/mol Number of moles of NaCl = 200/58.5 = 3.42 molesFrom the balanced equation, 2 moles of Na reacts with 1 mole of Cl2 to form 2 moles of NaCl. Therefore, the number of moles of Cl2 required for the reaction is 1

Mole of Cl2 ⟶ 2 moles of NaCl3.42 moles of NaCl ⟶ (1/2) x 3.42 = 1.71 moles of Cl2 Mass of Cl2 = Number of moles × Molar mass = 1.71 × 70.9 = 121.23 gThe mass of Na required to react with excess chlorine is given by the difference in the masses of Na and NaCl, which is:Mass of Na = 3.42 moles × 23 g/mol = 78.66 gSince the number of significant figures in the given mass of Na is three, the mass of Na required is 78.7 g. Therefore, the correct option is B. 78.65 g Na.

To know more about equation visit :

https://brainly.com/question/29657983

#SPJ11

The correct arrangement is: E 2 1 3 4, which corresponds to option (E) 2134. The compounds can be arranged in decreasing acidity order as follows:

CF₃COOH (trifluoroacetic acid)

CCI COOH (chloroacetic acid)

CH₃COOH (acetic acid)

CH₃CH₂OH (ethanol)

To arrange the compounds in order of decreasing acidity, we need to consider the strength of their conjugate bases. The stronger the acid, the weaker its conjugate base.

Let's analyze the compounds:

1. CH₃COOH (acetic acid): This is a weak acid.

2. CH₃CH₂OH (ethanol): This is not an acid; it is a neutral compound.

3. CF₃COOH (trifluoroacetic acid): This is a stronger acid than acetic acid due to the presence of the electron-withdrawing trifluoromethyl group (-CF₃).

4. CCI COOH (chloroacetic acid): This is a stronger acid than acetic acid due to the presence of the electron-withdrawing chlorine atom (-Cl).

Based on this analysis, we can arrange the compounds in decreasing acidity order as follows:

E. 2 (CH₃CH₂OH)

D. 4 (CCI COOH)

C. 1 (CH₃COOH)

B. 3 (CF₃COOH)

To know more about the acidity order refer here :

https://brainly.com/question/30371948#

#SPJ11

Number of moles of KI = 16 moles Therefore, the number of moles of Pb(NO3)2 required to react with 16 moles of

KI would be 16/2 = 8 moles of Pb(NO3)2.

Hence, the correct option is b. 8.

The balanced equation of the given chemical reaction is:

(aq) -> Pb(NO3)2 (aq) + 2K1 Pb)2(a + 2KNO3 (aq)

Here,

1 mole of Pb(NO3)2

would react with 2 moles of KI.Number of moles of KI = 16 moles Therefore, the number of moles of

Pb(NO3)2

required to react with 16 moles of KI would be

16/2 = 8 moles of Pb(NO3)2.

Hence, the correct option is b. 8.

To know more about moles visit:

https://brainly.com/question/15209553

#SPJ11