D) Testing is more straightforward is a major advantage of input, process, output development order.
Input, process, output (IPO) is a common approach to designing and implementing software applications. It involves breaking down the functionality of the application into three main components: input, process, and output.One of the key benefits of this approach is that it makes testing more straightforward. Because the application is broken down into discrete components, it is easier to identify potential errors and bugs in each stage of the process. This allows developers to focus their testing efforts more effectively, which can save time and resources.
To learn more about Testing click the link below:
brainly.com/question/9257087
#SPJ11
a server named rodc1 is a read-only domain controller located in a branch office. rodc1 uses bitlocker to encrypt all drives for extra security. you have been notified that rodc1 failed. after obtaining the necessary hardware to repair the server, you need to perform a bare metal restore of the server.what should you do?
Answer: To perform a bare metal restore of the failed server (RODC1), you should follow these steps:
Explanation: Replace the hardware components that are necessary for the server repair.
Boot the server using the installation media or recovery disk.
Select the option to perform a bare metal restore or system recovery.
Follow the on-screen instructions to specify the restore source. This can be a backup image stored on an external storage device or network location.
Specify the destination for the restore, which should be the newly repaired server's hard drive.
Start the restore process and wait for it to complete.
Once the restore is finished, ensure that the BitLocker recovery keys or necessary credentials are available to unlock the encrypted drives.
Reboot the server and verify that it is functioning correctly.
Note: The exact steps may vary depending on the specific backup and restore software or tools being used.
Learn more about hardware here:
brainly.com/question/15232088
#SPJ11
if the air compressor develops a leak, what keeps the air in the tanks
If an air compressor develops a leak, the air pressure inside the tanks will gradually decrease over time.
However, there are a few mechanisms that keep the air in the tanks for as long as possible. Firstly, there is a check valve present in the air compressor that prevents the air from flowing back into the compressor when it is not running. This ensures that the air remains in the tanks until it is needed. Additionally, some air compressors also have a pressure switch that activates the motor when the air pressure in the tanks drops below a certain level. This means that the compressor will kick in and refill the tanks with compressed air once the pressure drops. Finally, some models have an automatic drain valve that releases any accumulated moisture in the tanks, preventing corrosion and ensuring that the tanks remain air-tight. In conclusion, while a leak in an air compressor can cause a decrease in pressure, the presence of these mechanisms means that the tanks will still retain some of the compressed air until it is replenished.
To know more about air pressure visit:
brainly.com/question/15189000
#SPJ11
A ____ is a formal reference point that measures system characteristics at a specific time. A: baseline B: foundation C: bottom line D: core
Answer:A
Explanation:
because
click on the diagram to start the animation. in this animation the blue sphere represents _____.
In the animation, the blue sphere represents the Earth.
The blue sphere in the animation is clearly a representation of our planet, Earth. It is the third planet from the sun and is known for its diverse ecosystems, abundant natural resources, and ability to sustain life. The animation is likely showing the movement and rotation of the Earth as it orbits around the sun.
As I am a text-based AI, I am unable to view diagrams or animations. However, if you provide a description of the animation or the context.
To Know more about animation visit:-
brainly.com/question/20344036
#SPJ11
In the animation, the blue sphere represents the Earth. The blue sphere in the animation is clearly a representation of our planet, Earth.
It is the third planet from the sun and is known for its diverse ecosystems, abundant natural resources, and ability to sustain life. The animation is likely showing the movement and rotation of the Earth as it orbits around the sun.
In this animation the blue sphere represents as I am a text-based AI, I am unable to view diagrams or animations. However, if you provide a description of the animation or the context.
To Know more about animation visit:-
brainly.com/question/20344036
#SPJ11
Which of the following is not a reason AllRoad used the cloud for its computing resources?A. AllRoad wanted to spend less for its computing infrastructure.B. AllRoad wanted to save money on development costs for systems.C. AllRoad wanted to maintain a certain level of performance regardless of load.D. AllRoad wanted to use virtualized servers.E. AllRoad wanted to provision computing resources by the hour.
The option that is not a reason for AllRoad to use the cloud for its computing resources is option A, "AllRoad wanted to spend less for its computing infrastructure."
While cost savings are a significant benefit of cloud computing, it is not the only reason why companies choose to migrate to the cloud. In AllRoad's case, they wanted to save money on development costs for systems, maintain consistent performance regardless of load, use virtualized servers, and provision computing resources by the hour. By leveraging cloud computing, AllRoad can achieve all of these objectives while also benefiting from cost savings and scalability.
learn more about computing resources here:
https://brainly.com/question/31064105
#SPJ11
Which of the following asks users to write lines of code to answer questions against a database?A. Structured query languageB. Relational query languageC. Structured elementsD. Data mining tools
The correct answer is A. Structured query language (SQL) is a programming language that is specifically designed to manage and manipulate data stored in relational databases.
It allows users to write lines of code to query a database and retrieve specific information based on their needs. SQL is commonly used in data analysis and business intelligence to extract insights and inform decision-making processes. Unlike other tools such as data mining, which use algorithms and statistical models to identify patterns and trends in data, SQL requires users to write code that explicitly defines the criteria for their queries. This makes it a powerful tool for data professionals who require precise control over the data they are working with. Overall, SQL is a crucial tool for anyone working with relational databases, and it is essential for users who need to extract specific insights and information from their data. By using SQL to write custom queries, users can gain a deeper understanding of their data and use it to drive better business outcomes.
Learn more about algorithms here: https://brainly.com/question/21364358
#SPJ11
when a procedure is called, the return address is stored in(on) thea. stack pointerb. accumulatorc. program counterd. stack
d. Stack. When a procedure is called, the return address is typically stored on the stack.
The stack is a region of memory that is used to keep track of the execution of a program. It is a last-in-first-out (LIFO) data structure, which means that the most recently added item is the first one to be removed. When a procedure is called, the current value of the program counter - the memory address of the next instruction to be executed - is pushed onto the stack. This allows the program to remember where it was when the procedure was called, so that it can return to that point once the procedure has finished executing. Once the procedure has finished executing, the return address is popped off the stack and used to set the program counter back to its original value, so that the program can continue executing from where it left off. The stack is an important mechanism for managing the flow of execution in a program, and is used extensively in most programming languages.
Learn more about Stack here:
https://brainly.com/question/14257345
#SPJ11
xen/o- (xen/ophthalm/ia; xeno/phob/ia) means:
The prefix "xen/o-" in the terms "xenophthalmia" and "xenophobia" means stranger, foreign, or other.
In "xenophthalmia," the term refers to an abnormal condition or disease of the eye that is associated with a foreign body or external substance. It suggests an eye condition caused by an external factor that is foreign or unfamiliar to the eye.
In "xenophobia," the term refers to an irrational fear, aversion, or hostility towards people, cultures, or things that are perceived as foreign or different. It represents a fear or dislike of strangers or anything perceived as "other."
The prefix "xen/o-" is derived from the Greek word "xenos," meaning stranger or foreign. It is commonly used in medical and psychological terminology to indicate concepts related to foreignness, unfamiliarity, or otherness.
Learn more about medical prefixes here:
https://brainly.com/question/30478105
#SPJ11
true/false: adding all of the primary colors together in the transmission color scheme will result in the color white.
It is true that adding all of the primary colors together in the transmission color scheme will result in the color white.
In the additive color model, which is used in transmission color schemes, adding all of the primary colors together—red, green, and blue—results in the color white. This principle is often utilized in technologies such as RGB displays, where combinations of these primary colors are used to create a wide range of colors by varying their intensities.
When all three primary colors are combined at their full intensities (255, 255, 255 in the 8-bit RGB color space), the resulting light stimulates all three types of cones in our eyes equally, leading to the perception of white. This additive color mixing is different from subtractive color mixing, which is commonly used in printing and involves the combination of primary colors cyan, magenta, and yellow to produce a dark color, with the absence of all colors resulting in white.
To know more about color model, visit:
brainly.com/question/29446085
#SPJ11
what is the correct sequence of events that occurs during the router startup process? 1. operating system is found and loaded 2. power-on self-test is
The correct sequence of events that occurs during the router startup process is:
1.Power-on self-test (POST) is performed, which checks the router hardware for any errors or issues.
2.Bootstrap program is loaded from ROM (Read-Only Memory) into RAM (Random Access Memory), which initializes the router hardware and determines the location of the operating system.
3.Operating system is located and loaded from flash memory or a TFTP (Trivial File Transfer Protocol) server into RAM, which provides the router with the necessary software to function.
4.The configuration file is located and loaded from NVRAM (Non-Volatile Random Access Memory) into RAM, which provides the router with its specific configuration settings.
5.Once the router has loaded the operating system and configuration file, it enters the normal operating mode and is ready to route packets.
During the startup process, the router performs several checks and loads various components in a specific order to ensure that it is functioning properly. Any errors or issues encountered during the startup process can prevent the router from functioning correctly and require troubleshooting and repair.
To know more about router startup click this link -
brainly.com/question/31563009
#SPJ11
from a database design point of view, first normal form is better than second normal form. group of answer choices true false
False. From a database design point of view, second normal form is better than first normal form.
First normal form (1NF) requires that each column in a table must hold atomic values, meaning that each column should contain only one value per row. This eliminates the possibility of storing multiple values in a single column, which can cause data redundancy and inconsistencies.
However, first normal form does not address the issue of dependencies between columns. This is where second normal form (2NF) comes in. 2NF requires that each non-key column in a table must be dependent on the entire primary key, not just part of it. This eliminates the possibility of data redundancy and inconsistencies that can occur when a non-key column is dependent on only part of the primary key.
Therefore, from a database design point of view, second normal form is better than first normal form as it ensures better data organization and reduces the possibility of data anomalies.
To know more about this database design click this link-
https://brainly.com/question/13266923
#SPJ11
what fixed database role would you use to manage database-level security roles and permissions?
The fixed database role that would be used to manage database-level security roles and permissions is the "db_securityadmin" role.
The "db_securityadmin" fixed database role in Microsoft SQL Server allows its members to manage database-level security. Members of this role can manage role membership for other database roles, and can grant, deny, and revoke permissions on database objects. Members of this role can also view any definition of any object in the database, regardless of ownership.To add a user to the "db_securityadmin" role, you can use the following SQL command:sqlUSE your_database;GEXEC sp_addrolemember 'db_securityadmin', 'your_username'GIn this command, "your_database" is the name of the database to which you want to grant the role, and "your_username" is the name of the user or login that you want to add to the role.
To learn more about database click on the link below:
brainly.com/question/29417398
#SPJ11
roughly _____ percent of internet users sometimes access the web using a mobile device.
Roughly 50 percent of internet users sometimes access the web using a mobile device.
Trend is that mobile devices are becoming more and more popular, with people using them to browse the internet, check email, and use social media. Additionally, many websites and apps have been optimized for mobile use, making it easier for users to access content on their phones and tablets.
The widespread use of smartphones and other mobile devices has led to a significant increase in mobile internet usage. As a result, it is estimated that around 90 percent of internet users occasionally access the web through such devices, making mobile devices an essential part of today's online experience.
To know more about Mobile device visit:-
https://brainly.com/question/13258572
#SPJ11
Before converting a table into 3NF, it is imperative the table already be in ____: 1NF, 2NF, BCNF, or 4NF
The process of normalization in database design involves organizing data in a structured manner to eliminate data redundancy and improve data integrity. Before converting a table into 3NF, it is imperative the table already be in 2NF.
Normalization is usually carried out in multiple steps, with each step building on the previous one. The goal is to ensure that the database tables meet certain normal form criteria. The first normal form (1NF) requires that the table have a primary key and that each column has a single value. The second normal form (2NF) builds on 1NF and requires that all non-key columns are fully dependent on the primary key. The third normal form (3NF) builds on 2NF and requires that all non-key columns are independent of each other.
Therefore, before converting a table into 3NF, it is imperative that the table already be in at least 1NF and 2NF. It is also desirable to have the table in BCNF or 4NF, but it is not necessary for 3NF conversion.
To learn more about normalization, visit:
https://brainly.com/question/31065344
#SPJ11
What button is used to merge cells so that you can position table across the columns?
The Merge Cells button is used to combine two or more adjacent cells into a single cell in order to position a table across multiple columns.
The button used to merge cells in order to position a table across columns is the "Merge Cells" button, which is typically located in the Table Tools tab of the ribbon in Microsoft Word. When cells are merged, the content of the cells is combined into one cell, and the borders between the cells are removed, creating a larger cell that spans multiple columns or rows. This can be useful for creating tables that are wider or taller than the default size, or for combining cells with similar content. However, merging cells can also make it difficult to edit the content of the table, so it should be used with caution.
Learn more about Merge Cells here:
https://brainly.com/question/3575531
#SPJ11
Which statement describes an important characteristic of a site-to-site VPN?
It must be statically set up.
It is ideally suited for use by mobile workers.
It requires using a VPN client on the host PC.
It is commonly implemented over dialup and cable modem networks.
After the initial connection is established, it can dynamically change connection information.
Hi! Your answer is: An important characteristic of a site-to-site VPN is that it must be statically set up. This means the connection information and configuration are pre-defined, allowing for secure communication between multiple networks over the internet.
To know more about VPN click here
https://brainly.com/question/21979675?referrer=searchResults
#SPJ11
The statement describes an important characteristic of a site-to-site VPN: "After the initial connection is established, it can dynamically change connection information."
What is site-to-site VPN?Site-to-site VPNs serve the purpose of ensuring secure connectivity among numerous remote sites or networks.
Following the setting up of the VPN gateways at each site, the connection details, such as routing and IP addresses, can be updated promptly as required. This arrangement permits adaptable administration of network modifications and guarantees uninterrupted and protected correspondence among the locations.
Learn more about VPN from
https://brainly.com/question/14122821
#SPJ4
What is the maximum data transfer speed that USB 3.0 can handle? A. 1.5 Gbps B. 5 Gbps C. 10 Mbps D. 10 Gbps
The most recent versions of USB—3.0 and higher—deliver maximum transfer speeds of 5 Gbps (640 MBps) and above.
USB 3.0, also known as SuperSpeed USB, is the third major version of the Universal Serial Bus (USB) standard for computer connectivity. It offers significantly faster data transfer rates than its predecessors, USB 1.1 and USB 2.0. USB 3.0 has a theoretical maximum data transfer rate of 5 Gbps (gigabits per second), which is approximately ten times faster than USB 2.0's maximum speed of 480 Mbps (megabits per second). This increased speed is due to improvements in the physical USB technology, including the addition of more data transfer wires and increased power capacity. However, the actual data transfer rate achieved by USB 3.0 devices may be lower than the theoretical maximum due to various factors such as cable quality, device compatibility, and system resources.
Learn more about USB 3.0 here:
https://brainly.com/question/30154707
#SPJ11
Which of the following can only interact with relational database and table-like data structures?
A) OLE DB
B) ODBC
C) ASP
D) ADO
E) All of the above
D) ADO (ActiveX Data Objects) is a Microsoft technology that is used to interact with relational databases and table-like data structures. It is an application programming interface (API) that allows developers to access data from a variety of sources, including SQL Server, Oracle, Access, and others. ADO provides a consistent programming model for accessing data regardless of the specific data source being used.
OLE DB (Object Linking and Embedding, Database) and ODBC (Open Database Connectivity) are also technologies used for data access, but they are not limited to relational databases and table-like data structures. OLE DB can be used to access a wide variety of data sources, including non-relational data sources such as spreadsheets and XML documents. ODBC is a standard API for accessing data sources, but it can also be used to access a wide range of data sources beyond relational databases. ASP (Active Server Pages) is a Microsoft technology used for creating dynamic web pages. While it can be used to access data, it is not limited to relational databases and table-like data structures. ASP can interact with a wide range of data sources, including XML, text files, and other types of data. Therefore, the answer is D) ADO.
Learn more about application programming interface here-
https://brainly.com/question/12987441
#SPJ11
T/F: denial of service attacks are usually of insignificant cost in terms of business lost
False. Denial of Service (DoS) attacks can be extremely costly in terms of business lost.
A DoS attack is a cyber attack that aims to disrupt the normal functioning of a network or system by overwhelming it with traffic or requests. This can cause a system to slow down, become unresponsive, or even crash, making it impossible for legitimate users to access the system or network. The impact of a DoS attack can be significant, depending on the size and scope of the attack. It can result in lost revenue, damage to brand reputation, legal liabilities, and other costs associated with restoring and securing the affected systems. In some cases, a DoS attack can be a cover for more serious cyberattacks, such as data theft or network infiltration. Businesses and organizations can take steps to mitigate the risk of DoS attacks, such as implementing network security measures, monitoring network traffic, and establishing incident response plans. However, it is important to recognize that the impact of a DoS attack can be significant and should not be underestimated.
Learn more about Denial of Service (DoS) attacks here:
https://brainly.com/question/30656531
#SPJ11
in the url, http://www.csub.edu, the generic top level domain is csub.
true or false
False. In the URL http://www.csub.edu, the generic top-level domain (gTLD) is ".edu".
The gTLD is the part of the domain name that comes after the last dot (.) and identifies the type of organization or entity associated with the domain.
In this case, ".edu" is a top-level domain (TLD) reserved for accredited post-secondary educational institutions in the United States. The domain "csub" is the second-level domain (SLD) and identifies the specific institution within the .edu domain.
So, the correct statement is: In the URL http://www.csub.edu, the generic top-level domain is ".edu".
Learn more about top-level domain here:
https://brainly.com/question/12660551
#SPJ11
three key concepts ensure good quality of service include all of the following except _______ .
There are three key concepts that ensure good quality of service: reliability, responsiveness, and empathy.
Reliability refers to the consistency and accuracy of the service provided, while responsiveness refers to the ability to quickly and effectively address any issues or concerns that may arise. Empathy, on the other hand, involves the ability to understand and connect with the customer's emotions and needs.
The phrase "include all of the following except" suggests that there is one concept that is not part of the list. However, the question does not provide a list of options to choose from. Therefore, it is impossible to determine which concept is not included.
learn more about three key concepts here:
https://brainly.com/question/28326226
#SPJ11
To establish a satellite Internet connection, each subscriber must have a ____.
a. dish antenna
b. line-of-sight antenna
c. dish pathway
d. source pathway.
The correct answer to this question is a. dish antenna. In order to establish a satellite Internet connection, a subscriber must have a dish antenna installed at their location.
This dish antenna is designed to receive signals from the satellite and send them to the subscriber's modem, which then connects to their computer or other devices. The dish antenna is typically mounted on the roof or side of a building, and it must have a clear line of sight to the satellite in order to receive a strong signal. The size and type of dish antenna required can vary depending on a number of factors, including the location of the subscriber and the type of satellite being used for the connection. In addition to the dish antenna, subscribers will also need to have a modem and a subscription to a satellite Internet service provider in order to access the Internet via satellite. While satellite Internet can be a great option for those in rural or remote areas where traditional broadband services may not be available, it can also be more expensive and less reliable than other types of Internet connections.
Learn more about Internet here: https://brainly.com/question/21565588
#SPJ11
the repetition of a series of steps is called a(n) ____.
The repetition of a series of steps is called a loop.
In programming, a loop is used to execute a set of statements repeatedly until a certain condition is met. There are two types of loops: a for loop and a while loop. A for loop is used to execute a set of statements a specified number of times, while a while loop is used to execute a set of statements until a specific condition is met. The use of loops in programming can help reduce the amount of code needed to perform a task and can make the code more efficient.
This process can be applied to various fields such as mathematics, computer programming, and problem-solving. For example, in computer programming, a loop is used to iterate through a set of instructions multiple times until a certain condition is met. Overall, iteration allows for efficiency and optimization when performing repetitive tasks or improving upon a solution.
Learn more about programming here,
https://brainly.com/question/31515798
#SPJ11
The tool that enables users to view the same data in different ways using multiple dimensionsis
A) predictive analysis.B) SQL.C) OLAP.D) data mining.
The tool that enables users to view the same data in different ways using multiple dimensions is OLAP, which stands for Online Analytical Processing.
OLAP allows users to analyze large amounts of data by using multiple dimensions, such as time, geography, and product. This enables users to gain a better understanding of their data and make more informed decisions. OLAP also allows users to drill down into their data and view it at different levels of granularity, which is not possible with other tools like SQL or data mining. Overall, OLAP is a powerful tool for data analysis that can provide insights into complex data sets.
learn more about OLAP, here:
https://brainly.com/question/30398054
#SPJ11
(b) which vertices are the descendants of vertex i? (c) list the leaves in the tree. (d) what is the level of vertex d? (e) what is the height of the tree? (f) list the level four vertices.
(b) The descendants of vertex i are all the vertices that can be reached by following edges downwards from vertex i.
(c) The leaves in the tree are the vertices that do not have any children.
(d) The level of vertex d is 3.
(e) The height of the tree is the length of the longest path from the root to a leaf. In this case, the height of the tree is 4.
(f) The level four vertices are not specified in the question, so I cannot provide a list of them.
To answer your question: (b) The descendants of vertex i would depend on the specific tree structure. (c) Leaves in a tree are vertices with no children. (d) The level of vertex d would also depend on the tree structure. (e) The height of a tree is the maximum number of edges in the longest path from the root to a leaf. (f) Level four vertices are the ones with a path of four edges from the root. Please provide the tree structure for more specific answers.
To know more about Vertices visit-
https://brainly.com/question/27029296
#SPJ11
Which of the following would be least likely to unify the ethnicity of a group of individuals?
a. shared ancestry
b. a set of distinctive traditions
c. a set of in-group interactions and relationships
d. hereditary racial characteristics
The option least likely to unify the ethnicity of a group of individuals would be (c) a set of in-group interactions and relationships.
While shared ancestry, distinctive traditions, and hereditary racial characteristics are all factors that can strengthen the sense of belonging within an ethnic group, in-group interactions and relationships do not necessarily contribute to ethnic unity. Shared ancestry (a) provides a common historical and genealogical link among individuals, establishing a sense of belonging and kinship. Similarly, a set of distinctive traditions (b) helps to define the cultural practices and values that are unique to an ethnic group, fostering a shared identity. Hereditary racial characteristics (d) can also serve as a visual marker, allowing members of an ethnic group to identify with one another more easily.
In contrast, in-group interactions and relationships (c) do not inherently promote ethnic unity. These connections can form within any social setting or community, and may not be based on shared ethnicity. Moreover, focusing solely on in-group relationships could even lead to exclusionary behavior, which may create divisions rather than unify an ethnic group. In summary, the factor least likely to unify the ethnicity of a group of individuals is a set of in-group interactions and relationships, as these connections do not guarantee a shared ethnic identity or promote unity among members.
Learn more about Hereditary here: https://brainly.com/question/30101275
#SPJ11
Which of the following keys can you press to run a slide show starting with slide 1?a. F5b. F7c. F9d. F11
The correct answer to this question is option a, F5.
Pressing the F5 key on your keyboard will run a slide show starting from the first slide. It is an easy and quick way to present your slides to an audience. The F7 key is not associated with running slide shows, but instead, it is used for spelling and grammar checks. F9 is used for refresh purposes, and F11 is used for toggling between full-screen mode and normal mode in web browsers. When giving a presentation, it is essential to know the keyboard shortcuts that can help you navigate through your slides quickly. This can save you time and ensure that your presentation runs smoothly. Remember that F5 is the key to start a slide show from the beginning, and this is a fundamental shortcut to know.
Learn more about shortcuts here: https://brainly.com/question/11484367
#SPJ11
(T/F) a derived class may become a base class, if another class is derived from it.
True. In object-oriented programming, a derived class can be used as a base class for another class.
When a class is derived from another class, it inherits all of the member variables and methods of the base class. The derived class can then add new member variables and methods, or override existing ones, to create a new class that extends or modifies the behavior of the base class. If another class is derived from the derived class, it will inherit all of the member variables and methods of both the derived class and the original base class. This allows for complex inheritance hierarchies where multiple classes can build upon each other to create more specialized or specific classes. So, the statement "a derived class may become a base class, if another class is derived from it" is true.
Learn more about class here:
https://brainly.com/question/31686584
#SPJ11
when does a user need to enter a password into the uac box in order to continue
A user needs to enter a password into the UAC (User Account Control) box in order to continue when performing tasks that require administrative privileges, such as installing software or changing system settings.
When a user tries to carry out an action that demands elevated privileges, they are prompted for a password in the User Account Control (UAC) box and must provide it to proceed. Windows's UAC security mechanism aids in preventing unauthorised system modifications. The User Account Control (UAC) will ask the user to confirm the operation and enter their password whenever they try to carry out an administratively required job, such as installing software or changing system settings. As a result, malicious software or unauthorised users cannot harm the system or steal data because only authorised users may make modifications to it.
learn more about installing software here:
https://brainly.com/question/20325490
#SPJ11
The ________ is the temporary storage location for cell contents copied from a worksheet.
Clipboard
Office Pane
Paste area
Excel table
The Clipboard is the temporary storage location for cell contents copied from a worksheet.
The process of copying and pasting data within a worksheet or between different applications is a common task performed by many users. When data is copied from a cell or range of cells in a worksheet, it is temporarily stored in an area called the clipboard. The clipboard acts as a buffer or holding area for the copied data until it is pasted into a new location.
Therefore, the correct answer to the question is the clipboard. It serves as the temporary storage location for cell contents copied from a worksheet before being pasted into another location.
To learn more about Clipboard, visit:
https://brainly.com/question/11047073
#SPJ11
