Which of the following is not a real number?

Answer:

The answer is 90+0+0.1+0.02+0.005.

Step-by-step explanation:

The reason for my answer is because 90 is in the tens place. 90+0 is equal to 90 so that's why it is a +0 after the 90. Now, we have a decimal. After the decimal, we have 125. It is +0.1 because the 1 in 90.125 is in the tenths place. Next, it is +0.02 because the 2 in 90.125 is in the hundredths place. Last but not least, it is +0.005 because the 5 in 90.125 is in the thousandths place.

Answer:

Hey there!

The slope is -1/3, because the rise over run is -1/3.

Let me know if this helps :)

Answer:

Step-by-step explanation:

Given: 4 - 9x +21

Factorizing this expression, we have;

              4 -3(3x - 7)

i. Chang's expression: 4 - 3(3x + 7)

This is not an equivalent expression, because by expansion of the bracket, the expression gives: 4 -9x -21

ii. Benjamin's expression: 4 + 3(3x + 7)

This is not an equivalent expression, because by expansion of the bracket, the expression gives: 4 +9x +21

iii. Habib's expression: 4 + 12x

This is not an equivalent expression, because the expression is not related to the given question

Comparing the three student's answers with the appropriate expression, none of the student's is an equivalent expression.

This expression that is  equivalent to the given question is;

            4 -3(3x - 7) = 4 -9x + 21

Answer:

1,2,4

Step-by-step explanation:

Answer:

139 cards

Step-by-step explanation:

This is basically just a division statement - we have 417 cards and want to split it with 3 people (two friends + himself = 3 people).

We can divide these using a calculator or long division, but either way you will get:

[tex]417\div3=139[/tex]

Hope this helped!

Answer: 139

Step-by-step explanation:

417 divided by 3 gives you 139.

Answer:

13.59%

Step-by-step explanation:

Calculate the z-scores.

z = (x − μ) / σ

z₁ = (450 − 400) / 50

z₁ = 1

z₂ = (500 − 400) / 50

z₂ = 2

Use a chart or calculator to find the probability.

P(1 < Z < 2)

= P(Z < 2) − P(Z < 1)

= 0.9772 − 0.8413

= 0.1359

Answer:

13.5

Step-by-step explanation:

Acellus sux

This is an arithmetic sequence because the difference

between the terms in the sequence remain constant.

In other words, we subtract 9 from one term to get the next.

So we start off with the explicit formula, shown below in yellow.

"n" will be the number of terms in the sequence,

a1 will be the first term in the sequence,

and d will be the common difference.

Now substitute these in like I have below.

You will get -425 as an answer.

Answer:

   Y = 2.843+ 0.037 X

Step-by-step explanation:

Let the equation of the straight line to be fitted to the data , be Y = a+b X where a and b are to be evaluated. The normal equations fro determining a and b are

∑Y = na +b ∑X

∑XY = a∑X + b∑X²

We now calculate ∑X, ∑Y , ∑X², and ∑XY

X                Y                XY              X²

5                  4                 20            25

7                  3              21                49

6                  2                 12            36

2                  5                 10             4

1                    1                1                 1          

21                 15                 64           115  

Thus the normal equation becomes

                                                 5a + 21b =15

                                                21a +115b = 64

Solving these two equations simultaneously we get

                                                105 a + 441b = 315

                                                105a + 575b = 320

                                                            134b= 5

b= 0.037 , a= 2.843

Hence the equation for the required straight line is

                    Y = 2.843+ 0.037 X

Answer:

7

Step-by-step explanation:

Answer:

Time = 1.45152 seconds

Step-by-step explanation:

1 foot = 0.000189 mile

300 ft = 300*0.000189

300 ft = 0.0567 miles

492 ft = 492*0.000189

492 ft = 0.092988 miles

Distance left to be covered by the train

= 0.092988-0.0567

= 0.036288 miles

Speed= 90mph

Time taken = distance/speed

Time taken= 0.036288/90

Time = 4.032*10^-4 hour

Time = 4.032*10^-4*60*60

Time = 1.45152 seconds

(1,1) is your answer.

Work is shown below.

Any questions? Feel free to ask.

Answer: (1,1)

Step-by-step explanation:

At origin, the value of the function is [tex]0[/tex]

and then it again becomes zero for the first time is at $2$

but the function isn't repeating itself (it's going downwards)

at $x=4$, it's exactly same, hence the period is $4$

Answer:

Step-by-step explanation:

It is possible that after an elastic collision a moving mass (1) strikes a stationary mass (2) and the two objects will have exactly the same final speed.

During an elastic collision, the momentum and kinetic energy are both conserved. Since one of the object is a stationary object, its velocity will be zero hence the other moving object will collide with the stationary object and cause both of them to move with a common velocity. The expression for their common velocity can be derived using the law of conservation of energy.

Law of conservation of energy states that the sum of momentum of bodies before collision is equal to the sum of momentum of the bodies after  collision.

Since momentum = mass*velocity

Before collision

Momentum of body of mass m1 and velocity u1  = m1u1

Momentum of body of mass m2 and velocity u2  = m2u2

Since the second body is stationary, u2 = 0m/s

Momentum of body of mass m2 and velocity u2  = m1(0) = 0kgm/s

Sum of their momentum before collision = m1u1+0 = m1u1 ... 1

After collision

Momentum of body of mass m1 and velocity vf  = m1vf

Momentum of body of mass m2 and velocity vf  = m2vf

vf is their common velocity.

Sum of their momentum before collision = m1vf+m2vf ... 2

Equating 1 and 2 according to the law;

m1u1 = m1vf+m2vf

m1u1 = (m1+m2)vf

vf = m1u1/m1+m2

vf s their common velocity after collision. This shows that there is possibility that they have the same velocity after collision.

The complete question is;

The polynomial P(x) = 5x²(x − 1)³(x + 9) has degree ____. It has zeros 0, 1, and ____. The zero 0 has multiplicity ____ , and the zero 1 has multiplicity ____

Answer:

A) degree = 6

B) -9 is also a zero of the polynomial

C) 0 has multiplicity of 2

1 has multiplicity of 3

Step-by-step explanation:

A) To find the degree of the polynomial, we will first have to identify each term [term is for example (x - 1)³]. Thus, to find the degree of each term we will add the exponents.

The terms are;

5x², (x - 1)³, (x + 9)

The exponents are, 2, 3 and 1 respectively.

Thus, degree = 2 + 3 + 1 = 6

B) A zero of a polynomial is the value of x that causes the polynomial function to equal 0.

Since 0 and 1 are zeros, looking at the polynomial P(x) = 5x²(x − 1)³(x + 9), we can tell that when the term which when x = 0 makes the polynomial 0 is 5x².

Similarly, the term which when x = 1 makes the polynomial 0 is (x - 1)³

Thus,we are left with the term (x + 9)

So for the polynomial to be zero, (x + 9) = 0

Thus,x = -9

So -9 is a zero of the polynomial

C) The zero 0 is from the term 5x².

Thus,the multiplicity is the highest power of x which is 2.

The zero 1 is from the term (x - 1)³. Thus, the multiplicity is the highest power of x which is 3

Answer:

Step-by-step explanation:

Probability is the likelihood or chance that an event will occur.

Probability = Expected outcome of event/Total outcome.

If a video rental store keeps a list of their top 15 movie rentals each week, the total outcome is 15.

If the list for the week includes 6 action, 4 comedies, 3 dramas, and 2 mysteries and the store manager removes a copy of each of the 15 movies from the shelf, then randomly selects 3 of the 15 to show on the display monitors in the store, the probability that she selected 2 comedies and 1 action movie will be calculated as shown;

Probability of selecting 2 comedies  = 4/15*4/15 = 16/225 (Note that the expected outcome in this case is 4).

Probability of selecting 1 action movie = 6/15 = 2/5

Hence, the probability that she selected 2 comedies and 1 action movie will be equivalent to 16/225*2/5 = 32/1125

Note that the rented movies will have to be returned hence reason for the replacement.

Answer:

a. The probability x = 2 cents = 7/22

b. The probability x = 6 cents = 35/66

c. The probability x = 10 cents = 5/33

d. The probability x = 11 cents= 28/33

e. The probability x = 15 cents = 20/33

f. The probability x = 20 cents = 14/33

g. The expected value of x = 5.9

Step-by-step explanation:

This is a binomial probability distribution. The number of trials is known .

a. The probability x = 2 cents.

Probability ( X=2) P( selecting 2 dimes)= 7C2 / 12c2

                                                    = 21 / 66 = 7/22

b. The probability x = 6 cents.

Probability ( X=6) P( selecting a nickel and a dime)= 5C1 * 7C1/ 12c2

                                                    = 5*7 / 66 = 35/66

c. The probability x = 10 cents.

Probability ( X=10) P( selecting two nickels )= 5C2 / 12c2)

                                                    = 10/ 66 = 5/33

d. The probability x = 11 cents.

Probability ( X=11) P( selecting a penny and a dime)= 8C1 * 7C1/ 12c2)

                                            = 8*7 / 66 = 56/66= 28/33

e. The probability x = 15 cents.

Probability ( X=15) P( selecting a penny and a nickel)= 8C1 * 5C1/ 12c2)

                                            = 8*5 / 66 = 40/66= 20/33

f. The probability x = 20 cents.

Probability ( X=20) P( selecting 2 pennies )= 8C2 / 12c2)

                                                = 28 / 66 = 14/33

g. The expected value of x.

E(X) = np

E(X) = 2 * (8C2+ 5C2+ 7C2)/(8+5+7) = 2( 28+10+21)/20

=2(59)/20= 5.9

Step-by-step explanation:

a2=a1+1/2=-1

a3=a2+1/2=-1/2, then we have common difference 0.5

a9=a1+(n-1)d

a9=-3/2+(8)0.5=5/2

Answer:

There is a positive correlation between X and Y.

Step-by-step explanation:

The estimated regression equation is:

[tex]\hat Y=20X+200[/tex]

The general form of a regression equation is:

[tex]\hat Y=b_{yx}X+a[/tex]

Here, [tex]b_{yx}[/tex] is the slope of a line of Y on X.

The formula of slope is:

[tex]b_{yx}=r(X,Y)\cdot \frac{\sigma_{y}}{\sigma_{x}}[/tex]

Here r (X, Y) is the correlation coefficient between X and Y.

The correlation coefficient is directly related to the slope.

And since the standard deviations are always positive, the sign of the slope is dependent upon the sign of the correlation coefficient.

Here the slope is positive.

This implies that the correlation coefficient must have been a positive values.

Thus, it can be concluded that there is a positive correlation between X and Y.

Answer:

[tex]4 {ft}^{3} [/tex]

Step-by-step explanation:

[tex]2 \times \frac{1}{4} = 0.5 \\ v = lbh \\ 4 \times 2 \times 0.5 \\ = 8 \times 0.5 \\ = 4 {ft}^{3} [/tex]

The volume of Luis’s cedar chest is 18 cubic feet.

The dimensions of Luis’s cedar chest are length=4 feet, width=2 feet and height=2 1/4 feet.

The volume of the cuboid is the measure of the space occupied within a cuboid. The cuboid is a three-dimensional shape that has length, breadth, and height. If we have a rectangular sheet and we go on stacking such sheets, we will end up getting a shape that has some length, breadth, and height.

The formula to find the volume of the cuboid is l×b×h.

Where, l=length, b=breadth or width and h=height.

Now, volume=4×2×2.25=18 cubic feet.

Therefore, the volume of Luis’s cedar chest is 18 cubic feet.

To learn more about the volume of the cuboid visit:

https://brainly.com/question/23118276.

#SPJ2

Answer:

a; H0: u= 140 Ha: u ≠ 140 two tailed test.

b. Therefore reject H0 as t= 3 ≠ t≤ t ( ∝/2) (n-1) =2.353 or

3 > t ( ∝/2) (n-1) =2.353    

c. If we check from the table the p- value is 0.6 which lies between 0.1 and 0.05  therefore reject H0.

d. Again reject H0 as 140 < 150.163

e. A type II error has not been committed as H0 is rejected.

Step-by-step explanation:

We formulate the null and alternative hypotheses as

a; H0: u= 140 Ha: u ≠ 140 two tailed test.

For a two tailed test the significance level ∝= 0.1 the critical region is given by

t ≤ t ( ∝/2) (n-1) and t > t ( ∝/2) (n-1)

So the critical region will be

t≤ t ( ∝/2) (n-1) =2.353

where

t= x` - u / s/ √n

Sr. No X X²

1 150 22500

2 150 22500

3 180 32400

4 170 28900

∑ 650 106,300

X`= ∑x/n = 650/4= 162.5

s²= 1/n-1 (x-x`)²= 1/n-1 [ ∑x² -(∑x)²/n ]

= 1/3[106,300 -650²/4] = 225

s= 15

Putting the values in the above equation

t= 162.5- 140/ 15/ √4

t= 3

So calculated value of t= 3

b. Therefore reject H0 as t= 3 ≠ t≤ t ( ∝/2) (n-1) =2.353 or

3 > t ( ∝/2) (n-1) =2.353    

c. If we check from the table the p- value is 0.6 which lies between 0.1 and 0.05  therefore reject H0.

d. a 90% confidence interval based on the calculated values will be

x`± 1.645 (s)/ √n

Putting the values

162.5 ±1.645 ( 15/2)

162.5 ±12.3375

174.84 , 150.163

d. Again reject H0 as 140 < 150.163

e. A type II error has not been committed as H0 is rejected.

Answer:

The 95% confidence interval is   [tex]0.88 < \mu_1 - \mu_2 < 5.12[/tex]

Step-by-step explanation:

From the question we are told that

   The  sample mean for fat-blocking [tex]\= x_1 = 13.7[/tex]

     The  sample size  for fat-blocking  [tex]n = 12[/tex]

      The standard deviation for  fat-blocking is [tex]\sigma_1 = 2.6[/tex]

      The  sample mean for control group is  [tex]\= x _2 = 10.7[/tex]

      The  sample size  for control group is [tex]n_2 = 12[/tex]

      The standard deviation for control group is [tex]\sigma _2 = 2.4[/tex]

Given that the confidence level is  95% then the level of significance can me mathematically evaluated as

                 [tex]\alpha = 100 - 95[/tex]

                 [tex]\alpha = 5 \%[/tex]

                    [tex]\alpha =0.05[/tex]

Generally the degree of freedom is mathematically represented as

           [tex]df = n_1 + n_2 - 2[/tex]

substituting values

           [tex]df = 12 +12 - 2[/tex]

           [tex]df = 22[/tex]

Next we obtain the critical value of [tex]\frac{\alpha }{2}[/tex] at a degree of freedom of  22 form the students t-distribution , the value is  

                [tex]t_{\frac{\alpha }{2}, df } = 2.074[/tex]

Generally the margin of error is mathematically represented as

            [tex]E = t_{\frac{\alpha }{2}, df } * \sqrt{ \frac{\sigma^2_1 }{n_1 } + \frac{\sigma^2_2 }{n_2 } }[/tex]

substituting values

            [tex]E = 2.07 4 * \sqrt{ \frac{ 2.6^2 }{12 } + \frac{2.4^2 }{12 } }[/tex]

           [tex]E = 2.12[/tex]

the 95% confidence interval for the differences of the means is mathematically represented as

        [tex]\= x_1 - \= x_2 - E < \mu_1 - \mu_2 < \= x_1 - \= x_2 + E[/tex]

substituting values

       [tex]13.7 - 10.7 - 2.12 < \mu_1 - \mu_2 < 13.7 - 10.7 + 2.12[/tex]

      [tex]0.88 < \mu_1 - \mu_2 < 5.12[/tex]

Answer:

4x^2-22x+30

=2(2x^2 - 11x + 15)

=2(2x^2 -6x -5x +15)

= 2 { 2x(x-3) - 5(x-3) }

= 2 (x-3) (2x - 5)

Step-by-step explanation:

Hey, there!!!

The answer is option B

here, we have;

=4x^2-22x+30

=4x^2-(10+12)x+30

= 4x^2-10x-12x+30

now, taking common,

=2x(2x-5) -6(2x-5)

= 2(x-3)(2x-5).

Hope it helps

The correct answer is B. 195 bpm

Explanation:

In health and related areas, THR or Target Heart Rate zone refers to the range of heart rate an individual should have including the maximum heart rate. In the case of Tierra, her THR zone indicates her maximum heart rate should be 185 beats per minute.

In this context, a heart rate above this number shows Tierra is working too hard or that his heart is doing too much effort, which is dangerous for her health. Thus, the heart rate that shows she is doing too hard is 195 bmp as this is the only one that is above the ideal rate.

Answer:

D. the bottom one is the answer, because hyperbola is two curves that curve infinitely

Answer:

Yes

Step-by-step explanation:

you would do 2(5x-10) + 2(8x+4)= 26x-12

Answer:

26x - 12

Step-by-step explanation:

The perimeter is the sum of all the exterior sides of a figure.

Here, we have a parallelogram, and its sides are 5x - 10, 8x + 4, 5x - 10, and 8x + 4. Adding these, we get:

(5x - 10) + (8x + 4) + (5x - 10) + (8x + 4) = 26x - 12

Thus, the answer is 26x - 12. Note that since the problem doesn't give a value for x, this cannot be simplified further.

~ an aesthetics lover

Answer:

Length of shortest side: 57

Length of medium side:59

Length of long side: 119

Step-by-step explanation:

Answer:

A. 30

Step-by-step explanation:

The interquartile range for a box and whiskers plot, is the value from the right side of the box minus the value of the left side of the box.

In this case at the far right side of the box it is at 130, at the far left side of the box it is at 100.

130-100=30

Answer:

[tex]\huge\boxed{IQR = 30}[/tex]

Step-by-step explanation:

Q1 = 130 (Left hand edge of the box)

Q3 = 100 (Right Hand edge of the box)

Interquartile Range = Q3-Q1

IQR = 130-100

IQR = 30

Answer:

15x + 15

Step-by-step explanation:

Combine like terms. Like terms are terms with the same amount of variables. Set the equation so that the terms are grouped:

6x + 9x + 6 + 9

Combine like terms:

(6x + 9x) = 15x

(6 + 9) = 15

15x + 15 is your answer.

~

Answer:

15x+15

Step-by-step explanation:

6x+9x=15x

9+6=15

6x+6+9x+9=15x+15

Step-by-step explanation:

[tex]f(f(x)) = f( {x}^{2} + 4)[/tex]

[tex] = {( {x}^{2} + 4) }^{2} + 4[/tex]

[tex] = {x}^{4} + 4 {x}^{2} + 16 + 4[/tex]

[tex] = {x}^{4} + 8 {x}^{2} + 20[/tex]

Answer:

Means:

1.55

1.73

Standard Deviation:

0.1434

0.1338

Coefficient of variation:

9.2

7.7

the limited data listed here shows evidence of stealing by the security service​ company's employees.

Step-by-step explanation:

Given data:

security Service Company          Other Companies    

               x₁                                                 x₂

               1.5                                              1.8

               1.7                                               1.9

               1.6                                               1.6

               1.4                                                1.7

               1.7                                                 1.8

               1.5                                                 1.9

               1.8                                                 1.6

               1.4                                                  1.5

               1.4                                                  1.7

               1.5                                                  1.8

      n₁ = 10                                                 n₂ = 10

To find:

coefficient of variation for each of the two​ samples

Solution:

The formula for calculating coefficient of variation of sample is:

Coefficient of Variation (CV) = (Standard Deviation / Mean) * 100%

Calculate Mean for Security Service Company data:

Mean =  (Σ x₁) / n₁

         = (1.5 + 1.7 + 1.6 + 1.4 + 1.7 + 1.5 + 1.8 + 1.4 + 1.4 + 1.5) / 10

         = 15.5 / 10

Mean = 1.55

Calculate Standard Deviation for Security Service Company data:

Standard Deviation = √∑(x₁ - Mean)²/n₁-1

                                = √∑(1.5-1.55)² + (1.7-1.55)² + (1.6-1.55)² + (1.4-1.55)² + (1.7-1.55)² + (1.5-1.55)² + (1.8-1.55)² + (1.4-1.55)² + (1.4-1.55)² + (1.5-1.55)² / 10-1

=√∑ (−0.05)² + (0.15)² + (0.05)² + (−0.15)² + (0.15)² + (−0.05)² + (0.25)² +  (−0.15)² +  (−0.15)² +  (−0.05)² / 10 - 1

= √∑0.0025 + 0.0225 + 0.0025 + 0.0225 + 0.0225 + 0.0025 + 0.0625 +        0.0225 + 0.0225 + 0.0025 / 9

= √0.185 / 9

= √0.020555555555556

= 0.14337208778404

= 0.143374

Standard Deviation = 0.143374

Coefficient of Variation for Security Service Company:

CV = (Standard Deviation / Mean) * 100%

     = (0.143374 /  1.55) * 100

     = 0.09249935 * 100

     = 9.249935

CV  = 9.2

CV  = 9.2%

Calculate Mean for Other Companies data:

Mean =  (Σ x₂) / n₂

          =  (1.8 + 1.9 + 1.6 + 1.7 + 1.8 + 1.9 + 1.6 + 1.5 + 1.7 + 1.8) / 10

          =   17.3 / 10

Mean  = 1.73

Calculate Standard Deviation for Other Companies data:

Standard Deviation = √∑(x₂-Mean)²/n₂-1

                                = √∑[(1.8-1.73)² + (1.9-1.73)² + (1.6-1.73)² + (1.7-1.73)² + (1.8-1.73)² + (1.9-1.73)² + (1.6-1.73)² + (1.5-1.73)² + (1.7-1.73)² + (1.8-1.73)²] / 10 - 1

                                = √∑ [(0.07)² + (0.17)² + (-0.13)² + (-0.03)² + (0.07)² + (0.17)² + (-0.13)² + (-0.23)² + (-0.03)² + (0.07)²] / 9

                                = √∑ (0.0049 + 0.0289 + 0.0169 + 0.0009 + 0.0049 + 0.0289 + 0.0169 + 0.0529 + 0.0009 + 0.0049) / 9

                                = √(0.161 / 9)

                                = √0.017888888888889                                

                                = 0.13374935098493

                                =  0.13375

Standard Deviation = 0.13375

Coefficient of Variation for Other Companies:

CV = (Standard Deviation / Mean) * 100%

     = (0.13375 / 1.73) * 100

     = 0.077312 * 100

     = 7.7312

CV = 7.7

CV = 7.7%

Yes, the limited data listed here shows evidence of stealing by the security service​ company's employees because there is a significant difference in the variation.