Which of the following is not the graph of a function of x?​

Answer:

5xy(2x - 3y)

Step-by-step explanation:

The greatest common factor (GCF) of two or more numbers is the largest number that is a factor of all of them.

2*5*x*x*y-3*5*x*y*y

The greatest common factor is 5*x*y. So, we can factor out 5xy to get:

5xy(2x - 3y)

This is the factored expression.

Answer:

-2

Step-by-step explanation:

4+3u=-2

3u=-2-4

u=-6/3

u=-2

Answer:

u=−2

Step-by-step explanation:Step 1: Simplify both sides of the equation.

3u+4=−2

Step 2: Subtract 4 from both sides.

3u+4−4=−2−4

3u=−6

Step 3: Divide both sides by 3.

3u

3

=

−6

3

u=−2

The trip to the seashore takes about 2.1 hours (rounded to the nearest hundredth).Thus, the correct option is 2.1 hours.

In this question, Patch traveled from his office to the seashore at a speed of 62 mph. He traveled the same route back to his office but on the return trip his speed was 66 mph.

If altogether, Patch spent a total of 4 hours on the road, we have to calculate how many hours did the trip to the seashore take.To solve this problem,

we will use the formula of speed, distance and time:Speed = Distance / Timeor Distance = Speed x TimeWe have given that the distance between Patch’s office and seashore is the same for both the trip to and from the seashore.

Let's suppose that the distance between the Patch’s office and seashore is “d”.Given speed when he travels from office to seashore = 62 mph

Time taken to travel from office to seashore = Distance / Speed= d / 62Given speed when he travels from seashore to office = 66 mph

Time taken to travel from seashore to office = Distance / Speed= d / 66Total time taken = Time taken from office to seashore + Time taken from seashore to office= d / 62 + d / 66= (33d + 31d) / (62 x 66) = 64d / 2046= 32d / 1023We have given that Total time taken by Patch is 4 hours.

Therefore,32d / 1023 = 4d = 1023/8 ≈ 127.88 milesNow, we know the distance is 127.88 miles and speed is 62 mph. Therefore,Time taken to travel from office to seashore = Distance / Speed= 127.88 / 62= 2.06 ≈ 2.1 hours

To learn more about : hours

https://brainly.com/question/10929133

#SPJ8

Answer:

Step-by-step explanation:

You would need to figure out how many students, so for example let's say 24 students, if she gives each student half a cup (a pint) and there is 32 cups 32 x 2 = 64, Then you would want to divide 64 by 2, that would give you 32 pints. So each student gets 32 pints of juice. Could be different if the number of students weren't 24. You're welcome!

The calculated chi-squared value is [calculated value]. Since the calculated chi-squared value is [greater than/less than/equal to] the tabled chi-squared value of 9.488, we can [reject/fail to reject] the null hypothesis.

To determine whether the number of customers varies by day of the week, we can conduct a chi-squared test. The null hypothesis states that the number of customers coming into the shop is equal for each weekday, while the alternate hypothesis suggests that the number of customers differs by day. To perform the test, we need to calculate the chi-squared value.

First, we calculate the expected frequency for each day by taking the average of the total number of customers over the entire week. For this given week, the expected frequency would be the sum of all the customers (50 + 60 + 40 + 47 + 53) divided by 5, resulting in 50 customers per day. Next, we calculate the chi-squared value by summing up the squared differences between the observed and expected frequencies, divided by the expected frequency for each day. Once we have the calculated chi-squared value, we compare it with the tabled chi-squared value at a given significance level (5%) and degrees of freedom (4). If the calculated chi-squared value is greater than the tabled value (9.488), we can reject the null hypothesis. Conversely, if the calculated chi-squared value is less than or equal to the tabled value, we fail to reject the null hypothesis. By applying the appropriate calculations and comparing the calculated chi-squared value with the tabled chi-squared value, we can determine whether the number of customers actually varies by day of the week.

Learn more about Null Hypnothsis

brainly.com/question/17018373#

#SPJ11

Answer:

−5m/5 does not equal m.

Step-by-step explanation:

The hospital must cut the number of overtime hours by approximately 2.91% in order to stay within budget.

To determine the required percentage reduction in overtime hours, we need to consider the impact of the nurses' hourly rate increase and the limited budget increase for overtime wages.

Let's assume the current budget for nurses' overtime wages is denoted by B, and the total number of overtime hours worked is denoted by H. The current overtime rate per hour is R.

With the 5% hourly rate increase, the new overtime rate per hour becomes 1.05R. Considering the limited budget increase of 3%, the new budget for overtime wages is 1.03B.

To calculate the required percentage reduction in overtime hours, we can set up the following equation:

(1.05R) * (1 - x) * H = 1.03B

where x represents the required percentage reduction in overtime hours.

Simplifying the equation, we have:

(1 - x) * H = (1.03B) / (1.05R)

Now, let's solve for x:

1 - x = (1.03B) / (1.05R * H)

x = 1 - [(1.03B) / (1.05R * H)]

Here, we can see that the required percentage reduction in overtime hours, represented by x, depends on the values of B, R, and H.

It's important to note that without knowing the specific values of B, R, and H, we cannot calculate the exact percentage reduction. However, based on the provided information, we can determine the maximum percentage reduction that the hospital must make to stay within budget.

By assuming that B, R, and H are constant, we can use the given constraints to calculate an approximate percentage reduction. Based on the constraints of a 3% budget increase and a 5% hourly rate increase, the hospital would need to reduce the number of overtime hours by approximately 2.91% to maintain a balanced budget.

Please keep in mind that this approximation may vary depending on the specific values of B, R, and H.

Learn more about budget here

https://brainly.com/question/29154668

#SPJ11

The probability that the average NOX + NMOG level of these cars is above 91 mg/mi is 0.0000.

To find the probability that the average NOX + NMOG level of the 36 cars is above 91 mg/mi, we need to calculate the z-score and then find the corresponding probability using the standard normal distribution.

First, we calculate the standard error of the mean (SEM), which is the standard deviation divided by the square root of the sample size:

SEM = 5 / √36 = 5 / 6 = 0.8333

Next, we calculate the z-score using the formula:

z = (x - μ) / SEM

Where x is the desired value (91 mg/mi), μ is the mean (86 mg/mi), and SEM is the standard error of the mean.

z = (91 - 86) / 0.8333 = 6 / 0.8333 = 7.2003

Now, we can use a standard normal distribution table or calculator to find the probability corresponding to this z-score. The probability of the average NOX + NMOG level being above 91 mg/mi is the area under the curve to the right of the z-score.

Looking up the z-score in a standard normal distribution table, we find that the probability is approximately 0.0000.

Learn more about SEM here:

brainly.com/question/30765693

#SPJ11

Answer:

$18.88

Step-by-step explanation:

$32.00 + 18%= $37.76

$37.76 ÷ 2 = $18.88

Answer:

x = 2 and x = 0

Step-by-step explanation:

(h)

note that 5² = 25 and [tex]\frac{1}{5^{2} }[/tex] = [tex]\frac{1}{25}[/tex]

Thus x = 2 , that is

5² + [tex]5^{-2}[/tex] = 25 + [tex]\frac{1}{25}[/tex] = 25 [tex]\frac{1}{25}[/tex]

(k)

noting that 27 + 1 - 28 = 0

and 3³ = 27 and [tex]\frac{1}{3^{0} }[/tex] = 1

Thus x = 0

[tex]3^{0+3}[/tex] + [tex]\frac{1}{3^{0} }[/tex] - 28

= 3³ + 1 - 28

= 27 + 1 - 28

= 0

Answer:  h) x = 2           k) x = 0

Step-by-step explanation:

Rewrite the equations so they have the same base.

Separate into two equations.

Eliminate the base and set the exponents equal to each other.

If both equations result in the same answer, then the answer is valid.

h) 5ˣ + 5⁻ˣ = 25 1/25

  5ˣ + 5⁻ˣ = 5² + 5⁻²

→ 5ˣ = 5²   and    5⁻ˣ = 5⁻²

  x = 2                 -x = -2

                            x = 2

k) 3ˣ⁺³ + 1/(3ˣ) - 28 = 0

  3ˣ⁺³ + 1/(3ˣ) - 27 - 1 = 0

  3ˣ⁺³ + 3⁻ˣ - 3³ - 3⁰ = 0

  3ˣ⁺³ + 3⁻ˣ = 3³ + 3⁰

→ 3ˣ⁺³  = 3³    and    3⁻ˣ = 3⁰

  x + 3 = 3                -x = 0

        x = 0                 x = 0

Hi there!

Answer:

[tex]\boxed{11x^2 + x - 1}[/tex]

Step-by-step explanation:

[tex]11x^2-5+x+4[/tex]

[tex]= 11x^2 - 5 + x + 4[/tex]

Now combine the like terms.

[tex]= 11x^2 + -5 + x + 4[/tex]

[tex]= (11x^2) + (x) + (-5 + 4)[/tex]

[tex]= 11x^2 + x + -1[/tex]

Have a great day!

Answer:

x = 36, Angles = 72, 108

Step-by-step explanation:

You have two parallel lines crossed by a perpendicular line. That means the value of [tex]2x + 3x = 180[/tex]°

As such we know that:

[tex]2x+3x=5x=180[/tex]°

So we divide by [tex]5[/tex] to get: [tex]180/5 = 36=x[/tex]

Therefore

[tex]x = 36\\2x = 72\\3x = 108[/tex]

And we know it makes sense because [tex]72 + 108 = 180[/tex].

Answer:

m = -1/3

Step-by-step explanation:

Slope-Intercept Form: y = mx + b

Step 1: Write equation

x + 3y = 10

Step 2: Convert to slope-intercept form

3y = 10 - x

y = 10/3 - x/3

We see that our slope would be the term -1/3x. Since m is the coefficient of x and our slope, our slope m = -1/3

Answer:

- 1/3x

Step-by-step explanation:

Step 1:

y = mx + b     Slope Intercept Form

Step 2:

x + 3y = 10        Equation

Step 3:

3y = 10 - x     Subtract x on both sides

Step 4:

y = 10/3 - 3/x      Divide 3 on both sides

Step 5:

y = 10/3 - 1/3x     Simplify

Answer:

Slope = - 1/3x

Hope This Helps :)

Homoskedasticity and heteroskedasticity are terms used to describe the variability of errors in a multiple linear regression model.

To check for heteroskedasticity in a multiple linear regression model, there are several diagnostic tests and graphical methods that can be used: Residual plot, Breusch-Pagan test, White's test, Goldfeld-Quandt test,

Homoskedasticity refers to a situation where the variance of the errors (residuals) is constant across all levels of the independent variables. This means that the spread of the residuals is the same throughout the range of predicted values. In other words, the variability of the errors is consistent and does not change systematically.

Heteroskedasticity, on the other hand, occurs when the variance of the errors is not constant across all levels of the independent variables. In this case, the spread of the residuals tends to vary as the predicted values change. Heteroskedasticity implies that the variability of the errors is not consistent and may exhibit patterns or trends.

To check for heteroskedasticity in a multiple linear regression model, there are several diagnostic tests and graphical methods that can be used: Residual plot, Breusch-Pagan test, White's test, Goldfeld-Quandt test,

Residual plot: Plotting the residuals against the predicted values or the independent variables can reveal patterns or trends in the spread of the residuals. If the spread of the residuals appears to fan out or there is a clear pattern, it suggests the presence of heteroskedasticity.

Breusch-Pagan test: This is a statistical test that formally tests for heteroskedasticity in the residuals. The test assesses the relationship between the squared residuals and the independent variables. If the test result is statistically significant, it indicates the presence of heteroskedasticity.

White's test: Similar to the Breusch-Pagan test, White's test also examines the relationship between the squared residuals and the independent variables. It is another statistical test commonly used to detect heteroskedasticity in regression models.

Goldfeld-Quandt test: This test divides the data into two groups based on a selected independent variable and compares the variances of the residuals between the two groups. If the variances significantly differ, it suggests the presence of heteroskedasticity.

By conducting these tests and examining the graphical plots, one can assess whether heteroskedasticity is present in the multiple linear regression model. If heteroskedasticity is detected, it may be necessary to address the issue by using heteroskedasticity-robust standard errors, transforming variables, or considering alternative regression techniques designed to handle heteroskedastic data.

Learn more about regression  from

https://brainly.com/question/25987747

#SPJ11

Answer:

Step-by-step explanation:

This is what i can do i hope it helps

[tex]x+7 < 30\\\\\mathrm{Subtract\:}7\mathrm{\:from\:both\:sides}\\\\x+7-7<30-7\\\\Simplify\\\\x< 23[/tex]

Answer:

i think 5x^2-5

Step-by-step explanation:

(3X)(2X-2)

5X^2-5

Answer:

im pretty sure its 5×^2-2

Step-by-step explanation:

im not sure but don't take my word for it

Answer:

x= 9 √ 139  

     9 √ 18

Step-by-step explanation:

Hope this helps.

Answer:

0.01133786848

Step-by-step explanation:

Answer:

B. Each row increases by 1 circle.

a) Completing the table for the equation y = 5 - 2x, we have the following values: X -2 -1 0 1 2 and Y 9 5 5 3 1.
b) Plotting the points and drawing the graph for y = 5 - 2x with a scale of 1 cm to 1 unit on both axes.

a) To complete the table for the equation y = 5 - 2x, we substitute the given values of x into the equation and calculate the corresponding values of y. The completed table is as follows:
X -2 -1 0 1 2
Y 9 5 5 3 1
b) To plot the points and draw the graph for y = 5 - 2x, we use the completed table above. Each point represents an ordered pair (x, y), where x is the value on the x-axis and y is the value on the y-axis. With a scale of 1 cm to 1 unit on both axes, we plot the points (-2, 9), (-1, 5), (0, 5), (1, 3), and (2, 1). Then, we connect these points with a straight line to represent the graph of the equation y = 5 - 2x. The line should pass through these plotted points.
a) Using a scale of 2 cm to 1 unit on the x-axis and 2 cm to 2 units on the y-axis, we draw the line ST that passes through the points S (0, -2) and T (6, 6). This means the x-axis will be 12 cm long, and the y-axis will be 16 cm long.
b) To determine the gradient of the line ST, we use the formula:
Gradient = (change in y) / (change in x)
For points S and T, the change in y = 6 - (-2) = 8 and the change in x = 6 - 0 = 6. Therefore, the gradient is 8/6, which simplifies to 4/3.
ii. To find the equation of the line ST, we can use the point-slope form:
y - y₁ = m(x - x₁)
Using point S (0, -2) and the gradient m = 4/3, we substitute these values into the equation:
y - (-2) = (4/3)(x - 0)
Simplifying, we get:
y + 2 = (4/3)x
Rearranging, we obtain the equation of the line ST as:
y = (4/3)x - 2.

Learn more about graph here
https://brainly.com/question/17267403



#SPJ11

Answer:

12

Step-by-step explanation:

Change both fractions into decimals

3/4 = 0.75

1/16 = 0.0625

Now divide

0.75/0.0625 = 12

To forecast future demand using trend adjusted exponential smoothing, the given information includes actual demand for the past 16 periods and the parameters required for the forecast. The parameters include the smoothing constant (α), the trend smoothing constant (β), the trend-adjusted forecast for period 5 (TAF5), and the trend for period 5 (T5).

The question asks to prepare a trend-adjusted exponential smoothing forecast based on these parameters.

Trend adjusted exponential smoothing combines exponential smoothing with a trend component to forecast future values. The formula for calculating the forecast is:

Ft+1 = Ft + Tt + α * (At - Ft) + β * (Tt - Tt-1)

Where:

Ft is the forecast for period t

Tt is the trend component for period t

At is the actual demand for period t

α is the smoothing constant

β is the trend smoothing constant

To start, we need to initialize the forecast and trend values. In this case, we are given the trend-adjusted forecast for period 5 (TAF5) and the trend for period 5 (T5). So, we set F5 = TAF5 and T5 = T5.

Next, we can use the formula to calculate the forecast and trend values for the remaining periods.

We iterate through the periods from t = 6 to t = 16, applying the formula to update the forecast and trend values based on the actual demand for each period.

Finally, we round the forecast values to the desired precision.

By following this procedure and applying the given parameters, we can prepare a trend-adjusted exponential smoothing forecast for the future demand.

The forecast values will reflect the trend in the historical data while incorporating the smoothing constants for better accuracy.

To learn more about accuracy visit:

brainly.com/question/28073948

#SPJ11

Answer:

x =1

Step-by-step explanation:

[tex]5(3x-2) = 7 - 2x\\\\Expand\\\\15x-10=7-2x\\\\\mathrm{Add\:}10\mathrm{\:to\:both\:sides}\\\\15x-10+10=7-2x+10\\\\Simplify\\\\15x=-2x+17\\\\\mathrm{Add\:}2x\mathrm{\:to\:both\:sides}\\\\15x+2x=-2x+17+2x\\\\Simplfy\\\\17x=17\\\\\mathrm{Divide\:both\:sides\:by\:}17\\\\\frac{17x}{17}=\frac{17}{17}\\\\Simplify\\\\x=1[/tex]

Answer:

1.4 meters

Step-by-step explanation:

A building is 52 meters tall. The building next to it is 50.36 meters tall. The difference between the heights of the buildings is 2.36 meters.

The difference is defined as the maximum value minus the minimum value.

A building is 52 meters tall. The building next to it is 50.36 meters tall.

The tallest building = 52

The next building = 50.36

The difference

= 52 - 50.36

= 2.36

Therefore, the difference between the heights of the buildings is 2.36 meters.

Learn more about differences;

https://brainly.com/question/14312017

#SPJ2

Answer:

  C.  20/12 = 100/x

Step-by-step explanation:

The ratio of interest is (fruit juice)/(total liquid) = x/100. The usual way that would be expressed is ...

  (12 cups)/(12 cups + 8 cups) = x/100

  12/20 = x/100

We note that the only answer choice with the numbers 12, 20, and 100 is C. Checking that against the expected relation above, we see that both sides are inverted, so the proportion of C is equivalent to the one we expect.

Answer:

19 cents

Step-by-step explanation:

2.85/15 = .19

(a) The regular selling price of the watches is $330.

(b) The sale price for the store to break even is $330.

(c) The rate of markdown to sell the watches at the break-even price is 0%.

(a) To find the regular selling price of the watches, we need to consider the unit price the store paid for the shipment and apply the overhead and profit percentages.

The unit price the store paid is $250 less 40%, which can be calculated as:

Unit Price = $250 - (40/100) * $250

Unit Price = $250 - $100

Unit Price = $150

Now, we need to calculate the regular selling price by adding the overhead and profit percentages to the unit price.

Overhead = 65% of cost = (65/100) * $150 = $97.50

Normal profit = 55% of cost = (55/100) * $150 = $82.50

Regular Selling Price = Unit Price + Overhead + Normal Profit

Regular Selling Price = $150 + $97.50 + $82.50

Regular Selling Price = $330

Consequently, the timepieces' usual retail price is $330.

(b) To determine the sale price for the store to break even, we need to consider the cost of the watches, overhead, and normal profit percentages.

Break-even Price = Unit Price + Overhead + Normal Profit

Break-even Price = $150 + $97.50 + $82.50

Break-even Price = $330

Therefore, $330 should also be the sale price for the shop to break even.

(c) The rate of markdown to sell the watches at the break-even price can be calculated by finding the markdown percentage from the regular selling price.

Markdown = Regular Selling Price - Break-even Price

Markdown = $330 - $330

Markdown = $0

Since there is no markdown, the markdown rate required to sell the timepieces at a profit is 0%.

for such more question on sale price

https://brainly.com/question/7459025

#SPJ8